36E77619R0085-019.pdf

VA MEDICAL CENTER

DALLAS, TEXAS

BUILDING 6

A.H.E.R.A. ASBESTOS INSPECTION

MANAGEMENT PLAN

3-YEAR REASSESSMENT & UPDATE - 2014

PREPARED FOR:

VA NORTH TEXAS HEALTH CARE SYSTEM

ENGINEERING SERVICES

4500 S. LANCASTER ROAD

DALLAS, TX 75216

MICRO AIR PROJECT #B-1403

PREPARED BY:

MICRO AIR OF TEXAS, INC.

P. O. Box 1225 Dickinson, TX 77539

(281) 280-9965

DALLAS, TEXAS

AHERA

ASBESTOS INSPECTION

PREPARED FOR:

VA NORTH TEXAS HEALTH CARE SYSTEM

ENGINEERING SERVICES

4500 S. LANCASTER ROAD

DALLAS, TX 75216

PREPARED BY:

MICRO AIR OF TEXAS, INC.

P. O. Box 1225 Dickinson, TX 77539

(281) 280-9965

Original Inspection Dates: January 14 and 15, 2010

Individual Asbestos Consultant: ________________________

DSHS License # 10-5436

TABLE OF CONTENTS

Page #

General Inventory Management Plan Format

Section I - AHERA Asbestos Inspection General Information

Introduction, Required Information, & Facility Description 1 - 3

Section II - Asbestos Methodology & Lab Analytical Report

Methodology 1 Classification 1 Limitations 2 Homogeneous Sampling Area Summary Table 3 - 6 Laboratory Report Sample Location Drawing(s) Homogeneous Area Location Drawing(s)

Section III - ACM Material Assessment & Quantification

General Information 1 Surfacing Materials 2 Thermal System Insulation Materials 2 - 5 Miscellaneous Materials 6 - 20 Photos of Asbestos-containing Homogeneous Areas

Section IV - Asbestos Material Response Action Recommendations

Introduction 1 Response Action Prioritization 2 Response Action Recommendations 3 - 5

Section V - Operations & Maintenance Program

Purpose 1 Scope 1 Facility ACM 2 Operations & Maintenance Recommendations 3 - 4 O&M Activities 5

Section VI - Facility Owner / Designated Person(s)

Licenses and Training Certificates

Section VII - Six Month Surveillance Documentation

Section VIII - Three Year Reinspection Updates

Section IX - Response Actions

BUILDING INSPECTION FOR FRIABLE AND NON-FRIABLE ACM

GENERAL INVENTORY

FACILITY ID: Building 6

ORIGINAL INSPECTION COMPLETION DATES: January 14 and 15, 2010 3-YEAR RE-ASSESSMENT INSPECTION DATE: April, 2014

FACILITY ADDRESS: Building 6

VAMC

4500 S. Lancaster Road Dallas, TX 75216

TOTAL SQUARE FOOTAGE: APPROXIMATELY 12,702 SF

YEAR CONSTRUCTED: 1940

USE OF FACILITY: DAY TREATMENT

DESIGNATED PERSON: Thomas Rattler or Ken Taylor

ENGINEERING PHONE: 214-857-1069 - Contact Charles Ballard

INSPECTION COMPANY: MICRO AIR OF TEXAS, INC.

PO BOX 1225

DICKINSON, TX 77539

PHONE: (281) 280-9965

NAME OF ACCREDITED PERSONS

PERFORMING INSPECTION: JENNIFER MCMILLIN (DSHS LICENSE # 60-1893)

ELIZABETH BARGAR (DSHS LICENSE # 60-2614)

ACCREDITATION AGENCY: TEXAS DEPT. OF STATE HEALTH SERVICES

ACCREDITATION #: N/A

THIS BUILDING CONTAINS:

1. FRIABLE ACBM X

2. NON-FRIABLE ACBM X

3. FRIABLE MATERIAL

(ASSUMED TO BE ACBM) X

4. NON-FRIABLE MATERIAL

(ASSUMED TO BE ACBM)

5. NONE OF THE ABOVE

2/19/10

ACCREDITED INSPECTOR DATE

DSHS LICENSE # 60-1893

2/19/10

ACCREDITED INSPECTOR DATE

DSHS LICENSE # 60-2614

BUILDING 6

DALLAS, TX

A.H.E.R.A. ASBESTOS INSPECTION &

MANAGEMENT PLAN

PREPARED FOR:

VA NORTH TEXAS HEALTH CARE SYSTEM

ENGINEERING SERVICES

4500 S. LANCASTER ROAD

DALLAS, TX 75216

MICRO AIR PROJECT #B-1403

PREPARED BY:

MICRO AIR OF TEXAS, INC.

P. O. Bo 1225

MICRO AIR OF TEXAS, INC. BUILDING 6 - VA Medical Center; Dallas, TX

AHERA ASBESTOS INSPECTION & MANAGEMENT PLAN

P.O. Box 1225

MANAGEMENT PLAN FORMAT

SECTION I: This section contains general information regarding the AHERA survey and management plan, required information, and a facility description.

SECTION II: This section contains general information, sampling information, and Homogeneous Sample Area Summary. The laboratory analytical report for the bulk samples collected during the 2010 inspection has been included. Additionally, information on the survey report and classification of homogeneous areas is located in this section. Drawings depicting the locations of all bulk building material samples collected and asbestos-containing homogeneous area locations can be found in this sub-section.

SECTION III: This section contains material assessments and quantification which are used to develop the appropriate response actions for the management plan. Photographs of each asbestos-containing material identified has been included in this section.

SECTION IV: This section contains the recommended response actions for each type of ACM in the facility including recommendations for immediate abatement, if necessary. Immediate response action recommendations are prioritized.

SECTION V: This section contains an updated Operations and Maintenance Program for the facility.

This program includes recommendations for ongoing maintenance functions.

SECTION VI: This section has been reserved for informational purposes. This section includes the Facility Owner / Designated Person information, as well as the Re-inspection / Periodic Surveillance Schedule. All applicable licenses, certifications, and accreditations of the Inspector, Management Planner, and Laboratory performing services on this Management Plan are also included in this section.

SECTION VII: This section has been reserved for reports for the six month inspections, assessments, and any ambient air monitoring.

SECTION VIII: This section has been reserved for documentation obtained from three year re-inspections. Updates to the Management Plan are to be included in this section.

SECTION IX: This section has been reserved for the owner to reference abatement response action reports and building maintenance action (O&M) reports. All documentation from asbestos abatement activities should also be included in this section.

SECTION I

M ICRO AIR OF TEXAS, INC. VAMC; Dallas, Texas - Building 6 1

AHERA ASBESTOS INSPECTION

SECTION I - GENERAL INFORMATION

Introduction

Micro Air of Texas, Inc. (Micro Air) was contracted by the Veterans Administration North Texas Health Care System (VANTHCS) located in Dallas, Texas to perform an asbestos inspection and generate a management plan in accordance with guidelines established in 40 CFR 763, the Asbestos Hazard Emergency Response Act of 1987 (AHERA), for the Veterans Administration Medical Center (VAMC) located in Dallas, Texas. This facility consists of numerous buildings constructed between 1940 and 2009. This particular report pertains to Building 6, which houses Day Treatment.

Micro Air performed a comprehensive asbestos survey of Building 6 on January 14 and 15, 2010. After the comprehensive asbestos survey results were compiled, a Management Planner accredited by an EPA-approved training provider and licensed as an Individual Asbestos Consultant in the state of Texas, reviewed the analytical results of the inspection and current physical condition assessments. The management planner then determined the potential hazard posed by the ACM and evaluated and selected control / response options based on all compiled information. This information was then composed and written into a final report.

The federal National Emission Standard for Asbestos (NESHAP) and the Texas Asbestos Health Protection Act (TAHPA) both require that prior to any demolition or renovation activity in a building, a thorough inspection of the affected facility or part of the facility where the demolition or renovation operation will occur, must be performed for the presence of asbestos, including Category I and Category II non-friable asbestos-containing material (ACM).

Additionally, TAHPA requires that a minimum of three samples be collected from each homogeneous sampling area (material type) identified in the building. The work area and immediately surrounding areas which could foreseeably be disturbed by the actions necessary to perform the project must be inspected and sampled as applicable prior to renovations or demolition. While the VANTHCS is not subject to the TAHPA regulation, due to its exclusion as a federal facility, Micro Air collected bulk samples in accordance with TAHPA and AHERA protocol at the request of the VANTHCS engineering personnel.

M ICRO AIR OF TEXAS, INC. VAMC; Dallas, Texas - Building 6 2

Required Information

In accordance with AHERA protocol, the VAMC located in Dallas, Texas is required to name a person who shall be responsible for implementation of the management plan (Designated Person - see Section V). Per the Occupational Safety and Health Administration (OSHA) 1926.1101, construction industry standard, maintenance personnel should be made aware of the types and locations of all facility ACM. These employees are required to have adequate asbestos awareness training (minimum 2 hours), and all maintenance personnel who may come in contact with or disturb ACM are required to receive a minimum of 16 hours of asbestos training in asbestos hazards and recognition of ACM. If the owner wishes to perform ACM activities with its own personnel, the owner is responsible for obtaining the required EPA training in accordance with the Model Accreditation Plan (MAP), which is located in Appendix C, Subpart E of 40 CFR, 763 (AHERA). Additionally, all OSHA requirements must be met, as well (i.e., asbestos physical, etc.). Otherwise, it is recommended that all ACM activities be performed by a Texas licensed Asbestos Contractor, and project oversight be conducted by a Texas licensed Asbestos Consultant Agency.

In accordance with the VA directive to comply with AHERA, the entire facility must be re-inspected and a reassessment of ACM conducted by an accredited inspector at least once every three years, and the management plan should be updated by a licensed Asbestos Inspector / Management Planner or Individual Asbestos Consultant. Additionally, visual inspections of the ACM must also be made by the Designated Person for the facility at least once every six months to determine whether any areas of the material have changed in condition, or if there are any other factors which may necessitate abatement actions.

FACILITY DESCRIPTION

Building 6 is approximately 12,702 square feet in size, and it serves as Day Treatment for the Dallas VA. The construction date of this building is believed to be 1940. The building consists of a concrete foundation with a basement, two aboveground floors and an attic. An entrance to a crawl space was observed in the basement in the Engineering Room (Room 3A) located on the east side of the building; a similar area is present on the west side of the structure on the Building 6 Basement Floor Plan; an access point was not observed. The walls on the basement, first and second floors of the building are primarily plaster with occasional sheetrock installed during renovation activities that have taken place since the original construction. The ceilings on the first and second floors were originally plaster; drop ceilings with lay-in ceiling tile have been installed below the original plaster ceilings in most sections of the building. Limited areas of glued-on ceiling tile were observed in a few offices on the first and second floors or above lay-in ceiling tile. Concrete deck is present above lay-in ceiling tile in the basement level. Most of the floors in the building are carpeted with concrete beneath; several types of vinyl floor tile were also observed. Residual black or dark brown floor tile mastic on concrete is present beneath the carpeted floors. Terrazzo and ceramic tile was observed in some hallway areas and restrooms. HVAC air handlers were observed in the attic (total of three) and basement (one in the engineering room). It appears that original pipe insulation associated with the basement air handler was abated at some point and replaced with fiberglass insulation. Pipe insulation associated with air handlers in the attic were labeled

M ICRO AIR OF TEXAS, INC. VAMC; Dallas, Texas - Building 6 3 as asbestos-containing. HVAC silver duct boxes with black mastic were observed above the ceiling on each floor and in the attic. Remnant sections of original asbestos-containing steam pipe insulation was noted above the ceiling in most of the restrooms. Access to areas located above the plaster ceilings was limited; therefore, it is assumed that pipes exist above the solid ceilings and in wall chases. The exterior of the building is brick with a shingled roof.

SECTION II

SECTION II- ASBESTOS LABORATORY ANALYTICAL REPORT

METHODOLOGY

Micro Air of Texas, Inc. performed a comprehensive asbestos survey of Building 6 on January 14 and 15, 2010 in accordance with AHERA and TAHPA sampling protocol and assessment factors. The inspection was performed by Jennifer McMillin, an accredited asbestos inspector who is licensed as a Building Inspector by the state of Texas (license #60-1893) and Elizabeth Bargar, an accredited and state licensed asbestos inspector (license #60-2614). Micro Air of Texas, Inc. is licensed as an Asbestos Consulting Agency (#10-0110). All samples collected during this inspection were analyzed by J Resources, Inc., whose laboratory is accredited by3 the National Institute of Standards and Technology (NIST) under the National Voluntary Laboratory Accreditation Program (NVLAP) program (accreditation #200525-0) and licensed by the state of Texas (license #30-0273). Laboratory analysis of collected samples was performed in accordance with EPA and NVLAP prescribed methodologies for Polarized Light Microscopy of bulk material samples for the presence of asbestos. The results of laboratory analysis of collected bulk material samples are included in this section for reference.

A total of 110 bulk material samples were collected during this comprehensive survey, and all of the collected samples were analyzed by PLM. Federal regulations require that each identifiable layer of an individual bulk building material sample be analyzed separately for asbestos content. In addition, federal regulations state that if any one sample from a homogeneous area is found to be asbestos-containing, then the entire homogeneous area is considered asbestos-containing, regardless of the results from the remaining samples from that homogeneous area.

CLASSIFICATION

All materials which were sampled as being suspect for containing asbestos or were assumed to be asbestos-containing were grouped by sample type into Homogeneous Sampling Areas for purposes of assessment and quantification. Homogeneous materials are those which have similar appearance, texture, and function. If the inspector believes these materials to be the same, even if they are located in separate areas of a building, they may be grouped into the same sampling set. For purposes of this inspection report, the Homogeneous Area is designated as : HA. Each Homogeneous Area is given a number to distinguish it from other Homogeneous Areas (Example: HA-01A).

A CAD drawing(s) demonstrating the location of each collected bulk building material sample has been included in this section, as well as a CAD drawing(s) depicting the location of asbestos-containing homogeneous areas.

LIMITATIONS

Micro Air’s scope of services was limited primarily to accessible interior building materials.

While Micro Air made every effort to perform a thorough survey, the possibility exists that materials containing asbestos were not identified, inaccessible, or different from those identified at other locations. The findings and opinions presented are indicative of conditions on the date of our site inspection and should not be relied upon to represent conditions at substantially later dates, due to possible changes in the condition of building materials, renovations, and repairs. Additionally, most of the buildings located at this VA facility have steam pipes running underground to supply heat to each building. This material was inaccessible at the time of this inspection. All pipes located in wall chases, underground, in the crawlspace of a building, etc., is assumed to be ACM until tested and proven otherwise.

VAMC - DALLAS, TX

BUILDING 6

HOMOGENEOUS SAMPLE AREA SUMMARY

THE FOLLOWING TABLE DENOTES THE HOMOGENEOUS AREAS

IDENTIFIED IN BUILDING 6. THE TABLE INDICATES THE NUMBER OF

BULK BUILDING MATERIAL SAMPLES COLLECTED FOR EACH

HOMOGENEOUS AREA AND WHETHER THE HOMOGENEOUS AREA WAS

ASBESTOS-CONTAINING. ADDITIONALLY, ESTIMATED QUANTITIES OF

THE VARIOUS BUILDING MATERIALS SAMPLED HAVE ALSO BEEN

INCLUDED IN THE TABLE.

M ICRO AIR OF TEXAS, INC. VAMC; Dallas, Texas - Building 6 4

VAMC; DALLAS, TX

BUILDING 6

HOMOGENEOUS SAMPLE AREA SUMMARY

Homogeneous Area #

Sample Type Asbestos-containing?

# of Samples Collected

Est.

Quantity

HA-01 Steam Pipe Insulation (Straight Runs and

Fittings)

Yes 4 700 LF

HA-02 HVAC Pipe Insulation with White Wrap and White

Mastic (Basement and 2nd

Floor)

No 4 1,000 LF

HA-03 HVAC Pipe Insulation with White Wrap and White

Mastic (Attic)

Yes 3 700 LF

HA-04 HVAC Duct Insulation with Black Mastic

Yes 8 2,500 SF

HA-05 HVAC Vibration Joints Assumed

ACM

0 15 joints

HA-06 1' x 1' Ceiling Tile, Flat, Pin-hole Pattern, White, Glued-On (Type I)

No 3 2,980 SF

HA-07 Ceiling Tile Mastic, Brown No 3 386 SF

HA-08 2' x 2' Ceiling Tile, Flat, Pin-hole Pattern, Off- White, Lay-In (Type II)

No 3 2,743 SF

HA-09 2' x 2' Ceiling Tile, Flat Pin Hole Pattern, White, Lay-

In (Type III)

No 3 1,870 SF

HA-10 2' x 4' Ceiling Tile, Flat Pin Hole Pattern, Off-White, Lay-In (Type IV)

No 3 491 SF

HA-11 2' x 4' Ceiling Tile, Flat Pin Hole Pattern, White, Lay-

In (Type V)

No 3 1,625 SF

Homogeneous Area #

Sample Type Asbestos-containing?

# of Samples Collected

Est.

Quantity

M ICRO AIR OF TEXAS, INC. VAMC; Dallas, Texas - Building 6 5

HA-12 1' x 1' Wall Tile No 3 280 SF

HA-13 Plaster No 3 28,274 SF

HA-14 Sheetrock and Joint Compound

No 4 2,568 SF

HA-15 12" x 12" Vinyl Floor Tile, Cream with Brown Specks

& Black Mastic (Type I)

Yes (floor tile and mastic)

3 3,658 SF

HA-16 12" x 12" Vinyl Floor Tile, Tan with Specks & Yellow

Mastic and Residual Black Mastic (Type II)

Yes (residual black mastic)

3 1,315 SF

HA-17 12" x 12" Vinyl Floor Tile, White with Multi-Colored Specks & Yellow Mastic

(Type III)

No 3 24 SF

HA-18 12" x 12" Vinyl Floor Tile, Blue with Specks &

Yellow Mastic (Type IV)

No 3 108 SF

HA-19 12" x 12" Vinyl Floor Tile, Marble-Style, Tan and Cream & Yellow Mastic

(Type V)

No 3 190 SF

HA-20 12" x 12" Vinyl Floor Tile, Light Gray with Multi-

Colored Specks & Black Mastic (Type VI)

Yes (black mastic)

3 150 SF

HA-21 Residual Black Floor Mastic On Concrete

Beneath Carpet

Yes 5 Rev. Quantity:

3765 SF

(150 SF removed July, 2012)

HA-22 6" Cove Base, Peach & Tan Mastic

No 3 532 LF

HA-23 6" Cove Base, Blue & Tan Mastic

No 3 770 LF

Homogeneous Area #

Sample Type Asbestos-containing?

# of Samples Collected

Est.

Quantity

M ICRO AIR OF TEXAS, INC. VAMC; Dallas, Texas - Building 6 6

HA-24 6" Cove Base, Maroon & Tan Mastic

No 3 356 LF

HA-25 6" Cove Base, Brown & Beige Mastic

No 3 118 LF

HA-26 6" Cove Base, Light Gray & Beige/Brown Mastic

No 3 74 LF

HA-27 6" Cove Base, Gray- Brown & Beige/Brown

Mastic

No 3 414 LF

HA-28 Stair Tread Mastic, Brown No 3 144 SF

HA-29 Firestop, Red No 3 3 SF

HA-30 Firestop, White (Caulk) No 5 3 SF

HA-31 Firestop, Tan (Caulk) No 1 1 SF

HA-32 Filler Material, White No 2 2 SF

HA-33 Filler Material, Tan No 1 1 SF

HA-34 Gasket Material No 2 16 gaskets

HA-35 Sink Soundproofing No 4 5 sinks

HA-36 Exterior Window Caulk No 1 100 LF

Date Received: 25-Jan-2010 01-Feb-2010Date Analyzed:

JH1031717J3 Order #:

VAMC - DALLAS TX - BLDG 6

1052 Hercules Drive Houston TX 77058

Micro Air of Texas Richard Martin

Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)

EPA 600/M4-82-020; 600/R-93/116

Asbestos (Yes/No)

Sample Description Asbestos Constituents

Sample ID # Location Non-Asbestos Constituents

J3 Resources, Inc.

6110 W. 34th Street, Houston, Texas 77092

Phone: (713) 290-0221 - Fax: (713) 290-0248

J3Resources.com

01-Feb-2010Date Reported:

YesInsulation, White, Homogeneous Amosite Chrysotile

6-01 7% 25%

Other Non-Fibrous Material 68%

Cellulose FiberYesInsulation, Beige, Homogeneous Chrysotile6-02 20% 45%

Other Non-Fibrous Material 35%

Cellulose FiberYesInsulation, Beige, Homogeneous Chrysotile6-03 20% 45%

Other Non-Fibrous Material 35%

Cellulose FiberYesInsulation, Beige, Homogeneous Chrysotile6-04 75% <1%

Other Non-Fibrous Material 25%

Cellulose Fiber Fibrous Glass

NoLAYER 1 Mastic Wrap, White/ Silver, Homogeneous

None Detected6-05 30% 10%

Other Non-Fibrous Material 60%

Fibrous GlassNoLAYER 2 Insulation, Yellow, Homogeneous

None Detected 98%

Other Non-Fibrous Material 2%

Tracy Morgan Analyst

This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.

NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 1 of 21

Lab DirectorLee W. Poye

JH1031717J3 Order #:

VAMC - DALLAS TX - BLDG 6

1052 Hercules Drive Houston TX 77058

Micro Air of Texas Richard Martin

Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)

EPA 600/M4-82-020; 600/R-93/116

Asbestos (Yes/No)

Sample Description Asbestos Constituents

Sample ID # Location Non-Asbestos Constituents

J3 Resources, Inc.

6110 W. 34th Street, Houston, Texas 77092

Phone: (713) 290-0221 - Fax: (713) 290-0248

J3Resources.com

01-Feb-2010Date Reported:

Cellulose Fiber Fibrous Glass

NoLAYER 1 Mastic Wrap, White/ Silver, Homogeneous

None Detected6-06 30% 10%

Other Non-Fibrous Material 60%

Fibrous GlassNoLAYER 2 Insulation, Yellow, Homogeneous

None Detected 98%

Other Non-Fibrous Material 2%

Cellulose Fiber Fibrous Glass

NoLAYER 1 Mastic Wrap, White/ Silver, Homogeneous

None Detected6-07 30% 10%

Other Non-Fibrous Material 60%

Fibrous GlassNoLAYER 2 Insulation, Yellow, Homogeneous

None Detected 98%

Other Non-Fibrous Material 2%

Cellulose Fiber Fibrous Glass

NoLAYER 1 Mastic Wrap, White/ Silver, Homogeneous

None Detected6-08 30% 10%

Other Non-Fibrous Material 60%

Fibrous GlassNoLAYER 2 Insulation, Yellow, Homogeneous

None Detected 98%

Other Non-Fibrous Material 2%

Tracy Morgan Analyst

This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.

NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 2 of 21

JH1031717J3 Order #:

VAMC - DALLAS TX - BLDG 6

1052 Hercules Drive Houston TX 77058

Micro Air of Texas Richard Martin

Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)

EPA 600/M4-82-020; 600/R-93/116

Asbestos (Yes/No)

Sample Description Asbestos Constituents

Sample ID # Location Non-Asbestos Constituents

J3 Resources, Inc.

6110 W. 34th Street, Houston, Texas 77092

Phone: (713) 290-0221 - Fax: (713) 290-0248

J3Resources.com

01-Feb-2010Date Reported:

Cellulose Fiber Fibrous Glass

NoLAYER 1 Mastic Wrap, White/ Silver, Homogeneous

None Detected6-09 30% 10%

Other Non-Fibrous Material 60%

Fibrous GlassNoLAYER 2 Insulation, Yellow, Homogeneous

None Detected 98%

Other Non-Fibrous Material 2%

Cellulose Fiber Fibrous Glass

YesLAYER 1 Mastic Wrap, White/ Silver, Homogeneous

Chrysotile6-10 2% 30% 10%

Other Non-Fibrous Material 58%

Fibrous GlassNoLAYER 2 Insulation, Yellow, Homogeneous

None Detected 98%

Other Non-Fibrous Material 2%

Cellulose Fiber Fibrous Glass

YesLAYER 1 Mastic Wrap, White/ Silver, Homogeneous

Chrysotile6-11 2% 30% 10%

Other Non-Fibrous Material 58%

Fibrous GlassNoLAYER 2 Insulation, Yellow, Homogeneous

None Detected 98%

Other Non-Fibrous Material 2%

Tracy Morgan Analyst

This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.

NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 3 of 21

JH1031717J3 Order #:

VAMC - DALLAS TX - BLDG 6

1052 Hercules Drive Houston TX 77058

Micro Air of Texas Richard Martin

Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)

EPA 600/M4-82-020; 600/R-93/116

Asbestos (Yes/No)

Sample Description Asbestos Constituents

Sample ID # Location Non-Asbestos Constituents

J3 Resources, Inc.

6110 W. 34th Street, Houston, Texas 77092

Phone: (713) 290-0221 - Fax: (713) 290-0248

J3Resources.com

01-Feb-2010Date Reported:

Cellulose Fiber Fibrous Glass

YesLAYER 1 Mastic Wrap, Black/ Silver, Homogeneous

Chrysotile6-12 4% 30% 10%

Other Non-Fibrous Material 56%

Fibrous GlassNoLAYER 2 Insulation, Yellow, Homogeneous

None Detected 98%

Other Non-Fibrous Material 2%

Cellulose Fiber Fibrous Glass

YesLAYER 1 Mastic Wrap, Black/ Silver, Homogeneous

Chrysotile6-13 4% 30% 10%

Other Non-Fibrous Material 56%

Fibrous GlassNoLAYER 2 Insulation, Yellow, Homogeneous

None Detected 98%

Other Non-Fibrous Material 2%

Cellulose Fiber Fibrous Glass

YesLAYER 1 Mastic Wrap, Black/ Silver, Homogeneous

Chrysotile6-14 4% 30% 10%

Other Non-Fibrous Material 56%

Fibrous GlassNoLAYER 2 Insulation, Yellow, Homogeneous

None Detected 98%

Other Non-Fibrous Material 2%

Tracy Morgan Analyst

This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.

NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 4 of 21

JH1031717J3 Order #:

VAMC - DALLAS TX - BLDG 6

1052 Hercules Drive Houston TX 77058

Micro Air of Texas Richard Martin

Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)

EPA 600/M4-82-020; 600/R-93/116

Asbestos (Yes/No)

Sample Description Asbestos Constituents

Sample ID # Location Non-Asbestos Constituents

J3 Resources, Inc.

6110 W. 34th Street, Houston, Texas 77092

Phone: (713) 290-0221 - Fax: (713) 290-0248

J3Resources.com

01-Feb-2010Date Reported:

Cellulose Fiber Fibrous Glass

YesLAYER 1 Mastic Wrap, Black/ Silver, Homogeneous

Chrysotile6-15 4% 30% 10%

Other Non-Fibrous Material 56%

Fibrous GlassNoLAYER 2 Insulation, Yellow, Homogeneous

None Detected 98%

Other Non-Fibrous Material 2%

Cellulose Fiber Fibrous Glass

YesLAYER 1 Mastic Wrap, Black/ Silver, Homogeneous

Chrysotile6-16 4% 30% 10%

Other Non-Fibrous Material 56%

Fibrous GlassNoLAYER 2 Insulation, Yellow, Homogeneous

None Detected 98%

Other Non-Fibrous Material 2%

Cellulose Fiber Fibrous Glass

YesLAYER 1 Mastic Wrap, Black/ Silver, Homogeneous

Chrysotile6-17 4% 30% 10%

Other Non-Fibrous Material 56%

Fibrous GlassNoLAYER 2 Insulation, Black, Homogeneous

None Detected 97%

Other Non-Fibrous Material 3%

Tracy Morgan Analyst

This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.

NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 5 of 21

JH1031717J3 Order #:

VAMC - DALLAS TX - BLDG 6

1052 Hercules Drive Houston TX 77058

Micro Air of Texas Richard Martin

Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)

EPA 600/M4-82-020; 600/R-93/116

Asbestos (Yes/No)

Sample Description Asbestos Constituents

Sample ID # Location Non-Asbestos Constituents

J3 Resources, Inc.

6110 W. 34th Street, Houston, Texas 77092

Phone: (713) 290-0221 - Fax: (713) 290-0248

J3Resources.com

01-Feb-2010Date Reported:

Cellulose Fiber Fibrous Glass

YesLAYER 1 Mastic Wrap, Black/ Silver, Homogeneous

Chrysotile6-18 4% 30% 10%

Other Non-Fibrous Material 56%

Fibrous GlassNoLAYER 2 Insulation, Yellow, Homogeneous

None Detected 98%

Other Non-Fibrous Material 2%

Cellulose Fiber Fibrous Glass

YesLAYER 1 Mastic Wrap, Black/ Silver, Homogeneous

Chrysotile6-19 4% 30% 10%

Other Non-Fibrous Material 56%

Fibrous GlassNoLAYER 2 Insulation, Yellow, Homogeneous

None Detected 98%

Other Non-Fibrous Material 2%

Cellulose Fiber Fibrous Glass

NoCeiling Tile, White/ Tan, Homogeneous

None Detected6-20 45% 10%

Other Non-Fibrous Material 45%

Cellulose Fiber Fibrous Glass

NoCeiling Tile, White/ Tan, Homogeneous

None Detected6-21 45% 10%

Other Non-Fibrous Material 45%

Tracy Morgan Analyst

This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.

NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 6 of 21

JH1031717J3 Order #:

VAMC - DALLAS TX - BLDG 6

1052 Hercules Drive Houston TX 77058

Micro Air of Texas Richard Martin

Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)

EPA 600/M4-82-020; 600/R-93/116

Asbestos (Yes/No)

Sample Description Asbestos Constituents

Sample ID # Location Non-Asbestos Constituents

J3 Resources, Inc.

6110 W. 34th Street, Houston, Texas 77092

Phone: (713) 290-0221 - Fax: (713) 290-0248

J3Resources.com

01-Feb-2010Date Reported:

Cellulose Fiber Fibrous Glass

NoCeiling Tile, White/ Tan, Homogeneous

None Detected6-22 45% 10%

Other Non-Fibrous Material 45%

NoMastic, Brown, Homogeneous None Detected6-23 Other Non-Fibrous Material 100%

NoMastic, Brown, Homogeneous None Detected6-24 Other Non-Fibrous Material 100%

NoMastic, Brown, Homogeneous None Detected6-25 Other Non-Fibrous Material 100%

Cellulose Fiber Fibrous Glass

NoCeiling Tile, White/ Tan, Homogeneous

None Detected6-26 45% 10%

Other Non-Fibrous Material 45%

Cellulose Fiber Fibrous Glass

NoCeiling Tile, White/ Tan, Homogeneous

None Detected6-27 45% 10%

Other Non-Fibrous Material 45%

Cellulose Fiber Fibrous Glass

NoCeiling Tile, White/ Tan, Homogeneous

None Detected6-28 45% 10%

Other Non-Fibrous Material 45%

Tracy Morgan Analyst

This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.

NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 7 of 21

JH1031717J3 Order #:

VAMC - DALLAS TX - BLDG 6

1052 Hercules Drive Houston TX 77058

Micro Air of Texas Richard Martin

Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)

EPA 600/M4-82-020; 600/R-93/116

Asbestos (Yes/No)

Sample Description Asbestos Constituents

Sample ID # Location Non-Asbestos Constituents

J3 Resources, Inc.

6110 W. 34th Street, Houston, Texas 77092

Phone: (713) 290-0221 - Fax: (713) 290-0248

J3Resources.com

01-Feb-2010Date Reported:

Cellulose Fiber Fibrous Glass

NoCeiling Tile, White/ Gray, Homogeneous

None Detected6-29 45% 10%

Other Non-Fibrous Material 45%

Cellulose Fiber Fibrous Glass

NoCeiling Tile, White/ Gray, Homogeneous

None Detected6-30 45% 10%

Other Non-Fibrous Material 45%

Cellulose Fiber Fibrous Glass

NoCeiling Tile, White/ Gray, Homogeneous

None Detected6-31 45% 10%

Other Non-Fibrous Material 45%

Cellulose Fiber Fibrous Glass

NoCeiling Tile, White/ Tan, Homogeneous

None Detected6-32 45% 10%

Other Non-Fibrous Material 45%

Cellulose Fiber Fibrous Glass

NoCeiling Tile, White/ Gray, Homogeneous

None Detected6-33 45% 10%

Other Non-Fibrous Material 45%

Cellulose Fiber Fibrous Glass

NoCeiling Tile, White/ Tan, Homogeneous

None Detected6-34 45% 10%

Other Non-Fibrous Material 45%

Tracy Morgan Analyst

This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.

NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 8 of 21

JH1031717J3 Order #:

VAMC - DALLAS TX - BLDG 6

1052 Hercules Drive Houston TX 77058

Micro Air of Texas Richard Martin

Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)

EPA 600/M4-82-020; 600/R-93/116

Asbestos (Yes/No)

Sample Description Asbestos Constituents

Sample ID # Location Non-Asbestos Constituents

J3 Resources, Inc.

6110 W. 34th Street, Houston, Texas 77092

Phone: (713) 290-0221 - Fax: (713) 290-0248

J3Resources.com

01-Feb-2010Date Reported:

Cellulose Fiber Fibrous Glass

NoCeiling Tile, White/ Tan, Homogeneous

None Detected6-35 45% 10%

Other Non-Fibrous Material 45%

Cellulose Fiber Fibrous Glass

NoCeiling Tile, White/ Tan, Homogeneous

None Detected6-36 45% 10%

Other Non-Fibrous Material 45%

Cellulose Fiber Fibrous Glass

NoCeiling Tile, White/ Tan, Homogeneous

None Detected6-37 45% 10%

Other Non-Fibrous Material 45%

Fibrous GlassNoCeiling Tile, White, Homogeneous None Detected6-38 65%

Other Non-Fibrous Material 35%

Fibrous GlassNoCeiling Tile, White, Homogeneous None Detected6-39 65%

Other Non-Fibrous Material 35%

Fibrous GlassNoCeiling Tile, White, Homogeneous None Detected6-40 65%

Other Non-Fibrous Material 35%

NoPlaster, Tan, Homogeneous None Detected6-41 Other Non-Fibrous Material 100%

Tracy Morgan Analyst

This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.

NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 9 of 21

JH1031717J3 Order #:

VAMC - DALLAS TX - BLDG 6

1052 Hercules Drive Houston TX 77058

Micro Air of Texas Richard Martin

Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)

EPA 600/M4-82-020; 600/R-93/116

Asbestos (Yes/No)

Sample Description Asbestos Constituents

Sample ID # Location Non-Asbestos Constituents

J3 Resources, Inc.

6110 W. 34th Street, Houston, Texas 77092

Phone: (713) 290-0221 - Fax: (713) 290-0248

J3Resources.com

01-Feb-2010Date Reported:

NoLAYER 1 Plaster, White/ Beige, Homogeneous

None Detected6-42 Other Non-Fibrous Material 100%

Cellulose Fiber Fibrous Glass

NoLAYER 2 Ceiling Tile, Tan, Homogeneous

None Detected 45% 10%

Other Non-Fibrous Material 45%

Cellulose FiberNoPlaster, White/ Beige, Homogeneous None Detected6-43 <1%

Other Non-Fibrous Material 100%

NoLAYER 1 Painted Texture, Off-White, Homogeneous

None Detected6-44 Other Non-Fibrous Material 100%

Cellulose FiberNoLAYER 2 Tape, Beige, Homogeneous

None Detected 100%

NoLAYER 3 Joint Compound, White, Homogeneous

None Detected Other Non-Fibrous Material 100%

Cellulose Fiber Fibrous Glass

NoLAYER 4 Wallboard, Brown/ White, Homogeneous

None Detected 10% <1%

Other Non-Fibrous Material 90%

Tracy Morgan Analyst

This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.

NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 10 of 21

JH1031717J3 Order #:

VAMC - DALLAS TX - BLDG 6

1052 Hercules Drive Houston TX 77058

Micro Air of Texas Richard Martin

Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)

EPA 600/M4-82-020; 600/R-93/116

Asbestos (Yes/No)

Sample Description Asbestos Constituents

Sample ID # Location Non-Asbestos Constituents

J3 Resources, Inc.

6110 W. 34th Street, Houston, Texas 77092

Phone: (713) 290-0221 - Fax: (713) 290-0248

J3Resources.com

01-Feb-2010Date Reported:

NoLAYER 1 Painted Texture, Off-White, Homogeneous

None Detected6-45 Other Non-Fibrous Material 100%

Cellulose FiberNoLAYER 2 Tape, Beige, Homogeneous

None Detected 100%

NoLAYER 3 Joint Compound, White, Homogeneous

None Detected Other Non-Fibrous Material 100%

Cellulose Fiber Fibrous Glass

NoLAYER 4 Wallboard, Brown/ White, Homogeneous

None Detected 10% <1%

Other Non-Fibrous Material 90%

NoLAYER 1 Painted Texture, Off-White, Homogeneous

None Detected6-46 Other Non-Fibrous Material 100%

Cellulose FiberNoLAYER 2 Tape, Beige, Homogeneous

None Detected 100%

NoLAYER 3 Joint Compound, White, Homogeneous

None Detected Other Non-Fibrous Material 100%

Cellulose Fiber Fibrous Glass

NoLAYER 4 Wallboard, Brown/ White, Homogeneous

None Detected 10% <1%

Other Non-Fibrous Material 90%

Tracy Morgan Analyst

This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.

NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 11 of 21

JH1031717J3 Order #:

VAMC - DALLAS TX - BLDG 6

1052 Hercules Drive Houston TX 77058

Micro Air of Texas Richard Martin

Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)

EPA 600/M4-82-020; 600/R-93/116

Asbestos (Yes/No)

Sample Description Asbestos Constituents

Sample ID # Location Non-Asbestos Constituents

J3 Resources, Inc.

6110 W. 34th Street, Houston, Texas 77092

Phone: (713) 290-0221 - Fax: (713) 290-0248

J3Resources.com

01-Feb-2010Date Reported:

NoLAYER 1 Painted Texture, Off-White, Homogeneous

None Detected6-47 Other Non-Fibrous Material 100%

Cellulose Fiber Fibrous Glass

NoLAYER 2 Wallboard, Brown/ White, Homogeneous

None Detected 10% <1%

Other Non-Fibrous Material 90%

NoLAYER 1 Mastic, Yellow, Homogeneous

None Detected6-48 Other Non-Fibrous Material 100%

YesLAYER 2 Floor Tile, Beige, Homogeneous

Chrysotile 2% Other Non-Fibrous Material 98%

YesLAYER 3 Mastic, Black, Homogeneous

Chrysotile 3% Other Non-Fibrous Material 97%

YesLAYER 1 Floor Tile, Beige, Homogeneous

Chrysotile6-49 2% Other Non-Fibrous Material 98%

YesLAYER 2 Mastic, Black, Homogeneous

Chrysotile 3% Other Non-Fibrous Material 97%

YesLAYER 1 Floor Tile, Beige, Homogeneous

Chrysotile6-50 2% Other Non-Fibrous Material 98%

YesLAYER 2 Mastic, Black, Homogeneous

Chrysotile 3% Other Non-Fibrous Material 97%

Tracy Morgan Analyst

This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.

NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 12 of 21

JH1031717J3 Order #:

VAMC - DALLAS TX - BLDG 6

1052 Hercules Drive Houston TX 77058

Micro Air of Texas Richard Martin

Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)

EPA 600/M4-82-020; 600/R-93/116

Asbestos (Yes/No)

Sample Description Asbestos Constituents

Sample ID # Location Non-Asbestos Constituents

J3 Resources, Inc.

6110 W. 34th Street, Houston, Texas 77092

Phone: (713) 290-0221 - Fax: (713) 290-0248

J3Resources.com

01-Feb-2010Date Reported:

NoLAYER 1 Floor Tile, Beige, Homogeneous

None Detected6-51 Other Non-Fibrous Material 100%

YesLAYER 2 Mastic, Yellow/ Black, Homogeneous

Chrysotile 2% Other Non-Fibrous Material 98%

NoLAYER 1 Floor Tile, Beige, Homogeneous

None Detected6-52 Other Non-Fibrous Material 100%

NoLAYER 2 Mastic, Yellow, Homogeneous

None Detected Other Non-Fibrous Material 100.%

NoLAYER 1 Floor Tile, Beige, Homogeneous

None Detected6-53 Other Non-Fibrous Material 100%

YesLAYER 2 Mastic, Yellow/ Black, Homogeneous

Chrysotile 2% Other Non-Fibrous Material 98%

NoLAYER 1 Floor Tile, Beige, Homogeneous

None Detected6-54 Other Non-Fibrous Material 100%

NoLAYER 2 Mastic, Yellow, Homogeneous

None Detected Other Non-Fibrous Material 100%

NoLAYER 1 Floor Tile, Beige, Homogeneous

None Detected6-55 Other Non-Fibrous Material 100%

NoLAYER 2 Mastic, Yellow, Homogeneous

None Detected Other Non-Fibrous Material 100%

Tracy Morgan Analyst

This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.

NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 13 of 21

JH1031717J3 Order #:

VAMC - DALLAS TX - BLDG 6

1052 Hercules Drive Houston TX 77058

Micro Air of Texas Richard Martin

Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)

EPA 600/M4-82-020; 600/R-93/116

Asbestos (Yes/No)

Sample Description Asbestos Constituents

Sample ID # Location Non-Asbestos Constituents

J3 Resources, Inc.

6110 W. 34th Street, Houston, Texas 77092

Phone: (713) 290-0221 - Fax: (713) 290-0248

J3Resources.com

01-Feb-2010Date Reported:

NoLAYER 1 Floor Tile, Beige, Homogeneous

None Detected6-56 Other Non-Fibrous Material 100%

NoLAYER 2 Mastic, Yellow, Homogeneous

None Detected Other Non-Fibrous Material 100%

NoLAYER 1 Floor Tile, Blue, Homogeneous

None Detected6-57 Other Non-Fibrous Material 100%

NoLAYER 2 Mastic, Yellow, Homogeneous

None Detected Other Non-Fibrous Material 100%

NoLAYER 1 Floor Tile, Blue, Homogeneous

None Detected6-58 Other Non-Fibrous Material 100%

NoLAYER 2 Mastic, Yellow, Homogeneous

None Detected Other Non-Fibrous Material 100%

NoLAYER 1 Floor Tile, Blue, Homogeneous

None Detected6-59 Other Non-Fibrous Material 100%

NoLAYER 2 Mastic, Yellow, Homogeneous

None Detected Other Non-Fibrous Material 100%

NoLAYER 1 Floor Tile, Beige/ Tan, Homogeneous

None Detected6-60 Other Non-Fibrous Material 100%

NoLAYER 2 Mastic, Yellow, Homogeneous

None Detected Other Non-Fibrous Material 100%

Tracy Morgan Analyst

This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.

NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 14 of 21

JH1031717J3 Order #:

VAMC - DALLAS TX - BLDG 6

1052 Hercules Drive Houston TX 77058

Micro Air of Texas Richard Martin

Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)

EPA 600/M4-82-020; 600/R-93/116

Asbestos (Yes/No)

Sample Description Asbestos Constituents

Sample ID # Location Non-Asbestos Constituents

J3 Resources, Inc.

6110 W. 34th Street, Houston, Texas 77092

Phone: (713) 290-0221 - Fax: (713) 290-0248

J3Resources.com

01-Feb-2010Date Reported:

NoLAYER 1 Floor Tile, Beige/ Tan, Homogeneous

None Detected6-61 Other Non-Fibrous Material 100%

NoLAYER 2 Mastic, Yellow, Homogeneous

None Detected Other Non-Fibrous Material 100%

NoLAYER 1 Floor Tile, Beige/ Tan, Homogeneous

None Detected6-62 Other Non-Fibrous Material 100%

NoLAYER 2 Mastic, Yellow, Homogeneous

None Detected Other Non-Fibrous Material 100%

NoLAYER 1 Floor Tile, Beige/ Tan/ Green, Homogeneous

None Detected6-63 Other Non-Fibrous Material 100%

YesLAYER 2 Mastic, Black, Homogeneous

Chrysotile 3% Other Non-Fibrous Material 97%

NoLAYER 1 Floor Tile, Beige/ Tan/ Green, Homogeneous

None Detected6-64 Other Non-Fibrous Material 100%

YesLAYER 2 Mastic, Black, Homogeneous

Chrysotile 3% Other Non-Fibrous Material 97%

NoLAYER 1 Floor Tile, Beige/ Tan/ Green, Homogeneous

None Detected6-65 Other Non-Fibrous Material 100%

YesLAYER 2 Mastic, Black, Homogeneous

Chrysotile 3% Other Non-Fibrous Material 97%

Tracy Morgan Analyst

This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.

NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 15 of 21

JH1031717J3 Order #:

VAMC - DALLAS TX - BLDG 6

1052 Hercules Drive Houston TX 77058

Micro Air of Texas Richard Martin

Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)

EPA 600/M4-82-020; 600/R-93/116

Asbestos (Yes/No)

Sample Description Asbestos Constituents

Sample ID # Location Non-Asbestos Constituents

J3 Resources, Inc.

6110 W. 34th Street, Houston, Texas 77092

Phone: (713) 290-0221 - Fax: (713) 290-0248

J3Resources.com

01-Feb-2010Date Reported:

YesMastic, Black, Homogeneous Chrysotile6-66 3% Other Non-Fibrous Material 97%

YesMastic, Black, Homogeneous Chrysotile6-67 3% Other Non-Fibrous Material 97%

NoMastic, Brown, Homogeneous None Detected6-68 Other Non-Fibrous Material 100%

YesMastic, Yellow/ Black, Homogeneous

Chrysotile6-69 2% Other Non-Fibrous Material 98%

YesMastic, Brown/ Black, Homogeneous

Chrysotile6-70 4% Other Non-Fibrous Material 96%

NoMastic, Brown/ Tan, Homogeneous None Detected6-71 Other Non-Fibrous Material 100%

NoMastic, Brown/ Tan, Homogeneous None…