36E77619R0085-020.pdf
PDF Posted
- Solicitation number
- 36E77619R0085
About this file
This document provides details on a federal solicitation for corrective work at three buildings at the Dallas VA Medical Center. The Department of Veterans Affairs intends to solicit proposals and award a single firm-fixed-price contract for design-build services to investigate and correct water infiltration issues in Buildings 5, 6, and 8. The contractor will inspect basements, investigate all potential water entry points, develop a phasing schedule, seal all penetrations, divert water from exteriors, clean and reseal wall penetrations, install waterproofing, remediate interior sheetrock, ceiling tiles and flooring where mold is present in Buildings 6 and 8. The solicitation will be issued as a request for proposal on July 10, 2019, with a period of performance of approximately 270 calendar days from notice to proceed. The magnitude of construction is estimated between $1,000,000 to $2,000,000. The solicitation will be a total service-disabled veteran-owned small business set-aside, with applicable NAICS code 238190 and size standard of $15 million.
36E77619R0085 SOW Attachment 3 - Asbestos Inspection Bldg 8.pdf
View the file
Other files
Show all 43
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
VA MEDICAL CENTER
DALLAS, TEXAS
BUILDING 8
A.H.E.R.A. ASBESTOS INSPECTION
MANAGEMENT PLAN
3-YEAR REASSESSMENT & UPDATE - 2014
PREPARED FOR:
VA NORTH TEXAS HEALTH CARE SYSTEM
ENGINEERING SERVICES
4500 S. LANCASTER ROAD
DALLAS, TX 75216
MICRO AIR PROJECT #B-1403
PREPARED BY:
MICRO AIR OF TEXAS, INC.
P. O. Box 1225 Dickinson, TX 77539
(281) 280-9965
DALLAS, TEXAS
AHERA
ASBESTOS INSPECTION
PREPARED FOR:
VA NORTH TEXAS HEALTH CARE SYSTEM
ENGINEERING SERVICES
4500 S. LANCASTER ROAD
DALLAS, TX 75216
PREPARED BY:
MICRO AIR OF TEXAS, INC.
P. O. Box 1225 Dickinson, TX 77539
(281) 280-9965
Inspection Date: January 25, 2010
Individual Asbestos Consultant: ________________________
DSHS License # 10-5436
TABLE OF CONTENTS
Page #
General Inventory Management Plan Format
Section I - AHERA Asbestos Inspection General Information
Introduction, Required Information, & Facility Description 1 - 3
Section II - Asbestos Methodology & Lab Analytical Report
Methodology 1 Classification 1 Limitations 2 Homogeneous Sampling Area Summary Table 3 - 6 Laboratory Report Sample Location Drawing(s) Homogeneous Area Location Drawing(s)
Section III - ACM Material Assessment & Quantification
General Information 1 Surfacing Materials 2 Thermal System Insulation Materials 2 - 3 Miscellaneous Materials 3 - 17 Photos of Asbestos-containing Homogeneous Areas
Section IV - Asbestos Material Response Action Recommendations
Introduction 1 Response Action Prioritization 2 Response Action Recommendations 3 - 4
Section V - Operations & Maintenance Program
Purpose 1 Scope 1 Facility ACM 2 Operations & Maintenance Recommendations 3 - 4 O&M Activities 5
Section VI - Facility Owner / Designated Person(s)
Licenses and Training Certificates
Section VII - Six Month Surveillance Documentation
Section VIII - Three Year Reinspection Updates
Section IX - Response Actions
BUILDING INSPECTION FOR FRIABLE AND NON-FRIABLE ACM
GENERAL INVENTORY
FACILITY ID: Building 8
ORIGINAL INSPECTION COMPLETION DATE: January 25, 2010
3-YEAR RE-ASSESSMENT INSPECTION DATE: MAY 22, 2014
FACILITY ADDRESS: Building 8
VAMC
4500 S. Lancaster Road Dallas, TX 75216
TOTAL SQUARE FOOTAGE: APPROXIMATELY 8,288 SF
YEAR CONSTRUCTED: 1940
USE OF FACILITY: ACQUISITION & MATERIAL MANAGEMENT SERVICES
DESIGNATED PERSON: Thomas Rattler or Ken Taylor
ENGINEERING PHONE: 214-857-1069 - Contact Charles Ballard
INSPECTION COMPANY: MICRO AIR OF TEXAS, INC.
P. O. BOX 1225
DICKINSON, TX 77639
PHONE: (281) 280-9965
NAME OF ACCREDITED PERSONS
PERFORMING INSPECTION: JENNIFER MCMILLIN (DSHS LICENSE # 60-1893)
LISA MCGARRAH (DSHS LICENSE # 60-2923)
ACCREDITATION AGENCY: TEXAS DEPT. OF STATE HEALTH SERVICES
ACCREDITATION #: N/A
THIS BUILDING CONTAINS:
1. FRIABLE ACBM X
2. NON-FRIABLE ACBM X
3. FRIABLE MATERIAL
(ASSUMED TO BE ACBM)
4. NON-FRIABLE MATERIAL
(ASSUMED TO BE ACBM)
5. NONE OF THE ABOVE
2/28/10
ACCREDITED INSPECTOR DATE
DSHS LICENSE # 60-1893
2/28/10
ACCREDITED INSPECTOR DATE
DSHS LICENSE # 60-2923
BUILDING 8
DALLAS, TX
A.H.E.R.A. ASBESTOS INSPECTION &
MANAGEMENT PLAN
PREPARED FOR:
VA NORTH TEXAS HEALTH CARE SYSTEM
ENGINEERING SERVICES
4500 S. LANCASTER ROAD
DALLAS, TX 75216
MICRO AIR PROJECT #B-1403
PREPARED BY:
MICRO AIR OF TEXAS, INC.
P. O. Box 1225
MICRO AIR OF TEXAS, INC. BUILDING 8 - VA Medical Center; Dallas, TX
AHERA ASBESTOS INSPECTION & MANAGEMENT PLAN
P. O. Box 1225
MANAGEMENT PLAN FORMAT
SECTION I: This section contains general information regarding the AHERA survey and management plan, required information, and a facility description.
SECTION II: This section contains general information, sampling information, and Homogeneous Sample Area Summary. The laboratory analytical report for the bulk samples collected during the 2010 inspection has been included. Additionally, information on the survey report and classification of homogeneous areas is located in this section. Drawings depicting the locations of all bulk building material samples collected and asbestos-containing homogeneous area locations can be found in this sub-section.
SECTION III: This section contains material assessments and quantification which are used to develop the appropriate response actions for the management plan. Photographs of each asbestos-containing material identified has been included in this section.
SECTION IV: This section contains the recommended response actions for each type of ACM in the facility including recommendations for immediate abatement, if necessary. Immediate response action recommendations are prioritized.
SECTION V: This section contains an updated Operations and Maintenance Program for the facility.
This program includes recommendations for ongoing maintenance functions.
SECTION VI: This section has been reserved for informational purposes. This section includes the Facility Owner / Designated Person information, as well as the Re-inspection / Periodic Surveillance Schedule. All applicable licenses, certifications, and accreditations of the Inspector, Management Planner, and Laboratory performing services on this Management Plan are also included in this section.
SECTION VII: This section has been reserved for reports for the six month inspections, assessments, and any ambient air monitoring.
SECTION VIII: This section has been reserved for documentation obtained from three year re-inspections. Updates to the Management Plan are to be included in this section.
SECTION IX: This section has been reserved for the owner to reference abatement response action reports and building maintenance action (O&M) reports. All documentation from asbestos abatement activities should also be included in this section.
SECTION I
AHERA ASBESTOS INSPECTION
SECTION I - GENERAL INFORMATION
Introduction
Micro Air of Texas, Inc. (Micro Air) was contracted by the Veterans Administration North Texas Health Care System (VANTHCS) located in Dallas, Texas to perform an asbestos inspection and generate a management plan in accordance with guidelines established in 40 CFR 763, the Asbestos Hazard Emergency Response Act of 1987 (AHERA), for the Veterans Administration Medical Center (VAMC) located in Dallas, Texas. This facility consists of numerous buildings constructed between 1940 and 2009. This particular report pertains to Building 8, which currently houses Acquisition & Material Management Services.
Micro Air performed a comprehensive asbestos survey of Building 8 on January 25, 2010.
After the comprehensive asbestos survey results were compiled, a Management Planner accredited by an EPA-approved training provider and licensed as an Individual Asbestos Consultant in the state of Texas, reviewed the analytical results of the inspection and current physical condition assessments. The management planner then determined the potential hazard posed by the ACM and evaluated and selected control / response options based on all compiled information. This information was then composed and written into a final report.
The federal National Emission Standard for Asbestos (NESHAP) and the Texas Asbestos Health Protection Act (TAHPA) both require that prior to any demolition or renovation activity in a building, a thorough inspection of the affected facility or part of the facility where the demolition or renovation operation will occur, must be performed for the presence of asbestos, including Category I and Category II non-friable asbestos-containing material (ACM).
Additionally, TAHPA requires that a minimum of three samples be collected from each homogeneous sampling area (material type) identified in the building. The work area and immediately surrounding areas which could foreseeably be disturbed by the actions necessary to perform the project must be inspected and sampled as applicable prior to renovations or demolition. While the VANTHCS is not subject to the TAHPA regulation, due to its exclusion as a federal facility, Micro Air collected bulk samples in accordance with TAHPA and AHERA protocol at the request of the VANTHCS engineering personnel.
MICRO AIR OF TEXAS, INC. VAMC; Dallas, Texas - Building 8 1
Required Information
In accordance with AHERA protocol, the VAMC located in Dallas, Texas is required to name a person who shall be responsible for implementation of the management plan (Designated Person - see Section V). Per the Occupational Safety and Health Administration (OSHA) 1926.1101, construction industry standard, maintenance personnel should be made aware of the types and locations of all facility ACM. These employees are required to have adequate asbestos awareness training (minimum 2 hours), and all maintenance personnel who may come in contact with or disturb ACM are required to receive a minimum of 16 hours of asbestos training in asbestos hazards and recognition of ACM. If the owner wishes to perform ACM activities with its own personnel, the owner is responsible for obtaining the required EPA training in accordance with the Model Accreditation Plan (MAP), which is located in Appendix C, Subpart E of 40 CFR, 763 (AHERA). Additionally, all OSHA requirements must be met, as well (i.e., asbestos physical, etc.). Otherwise, it is recommended that all ACM activities be performed by a Texas licensed Asbestos Contractor, and project oversight be conducted by a Texas licensed Asbestos Consultant Agency.
In accordance with the VA directive to comply with AHERA, the entire facility must be re-inspected and a reassessment of ACM conducted by an accredited inspector at least once every three years, and the management plan should be updated by a licensed Asbestos Inspector / Management Planner or Individual Asbestos Consultant. Additionally, visual inspections of the ACM must also be made by the Designated Person for the facility at least once every six months to determine whether any areas of the material have changed in condition, or if there are any other factors which may necessitate abatement actions.
FACILITY DESCRIPTION
Building 8 is approximately 8,288 square feet in size, and it serves as Acquisition & Material Management Services. The construction date of this building is believed to be 1940; the date of an addition on the west side first and second floors, consisting of seven rooms (102 , 103, 104, 104A, 105, 106 & 107) on the first floor and 203 & 203A on the second floor, was not provided. It appears that an exterior porch area on the east side was also enclosed at some point. A temporary trailer (Building 8A, rooms 120, 121, 122, 123, 124, 125 & 126) was added to the north side of the building in 2001. The original building is a two story facility with a concrete foundation and an attic. The west addition and exterior porch enclosure were additions to the original building. The walls on the first and second floors of the original building are primarily plaster and sheetrock. The walls on the basement level of the building are primarily sheetrock, as well as the walls located in the west addition. The ceilings on the first and second floors of the original building were originally plaster; numerous drop ceilings with lay-in ceiling tile have been installed below the original plaster ceilings. It appears that most of the original plaster ceilings in the basement level were removed prior to installation of drop ceilings with lay-in ceiling tile. Most of the floors in the building are carpeted with concrete or wood beneath; several types of vinyl floor tile were also observed. There was limited access to areas located above the original plaster ceilings; therefore, it is assumed that pipes exist above the solid ceilings and in wall chases. Access to a crawl space beneath the basement was not observed, although the presence of a crawl space with insulated pipes is assumed.
MICRO AIR OF TEXAS, INC. VAMC; Dallas, Texas - Building 8 2
The exterior of the building is brick with a shingled roof. The temporary trailer addition is a single-story building with carpet-covered wood floors, sheetrock walls and a drop ceiling with lay-in ceiling tile. No pipe insulation was found in the temporary building at the time of this survey. HVAC duct insulation was noted above the ceiling; however, the Inspector noted that it was fiberglass with no mastic sealant, and therefore, not suspect for asbestos. The exterior of the temporary trailer addition is metal with a metal roof.
MICRO AIR OF TEXAS, INC. VAMC; Dallas, Texas - Building 8 3
SECTION II
SECTION II- ASBESTOS LABORATORY ANALYTICAL REPORT
METHODOLOGY
Micro Air of Texas, Inc. performed a comprehensive asbestos survey of Building 8 on January 25, 2010 in accordance with AHERA and TAHPA sampling protocol and assessment factors.
The inspection was performed by Jennifer McMillin, an accredited asbestos inspector who is licensed as a Building Inspector by the state of Texas (license #60-1893) and Lisa McGarrah, an accredited and state licensed asbestos inspector (license #60-2923). Micro Air of Texas, Inc. is licensed as an Asbestos Consulting Agency (#10-0110). All samples collected during this inspection were analyzed by J Resources, Inc., whose laboratory is accredited by the3
National Institute of Standards and Technology (NIST) under the National Voluntary Laboratory Accreditation Program (NVLAP) program (accreditation #200525-0) and licensed by the state of Texas (license #30-0273). Laboratory analysis of collected samples was performed in accordance with EPA and NVLAP prescribed methodologies for Polarized Light Microscopy of bulk material samples for the presence of asbestos. The results of laboratory analysis of collected bulk material samples are included in this section for reference.
A total of 96 bulk material samples were collected during this comprehensive survey, and all of the collected samples were analyzed by PLM. Federal regulations require that each identifiable layer of an individual bulk building material sample be analyzed separately for asbestos content. In addition, federal regulations state that if any one sample from a homogeneous area is found to be asbestos-containing, then the entire homogeneous area is considered asbestos-containing, regardless of the results from the remaining samples from that homogeneous area.
CLASSIFICATION
All materials which were sampled as being suspect for containing asbestos or were assumed to be asbestos-containing were grouped by sample type into Homogeneous Sampling Areas for purposes of assessment and quantification. Homogeneous materials are those which have similar appearance, texture, and function. If the inspector believes these materials to be the same, even if they are located in separate areas of a building, they may be grouped into the same sampling set. For purposes of this inspection report, the Homogeneous Area is designated as : HA. Each Homogeneous Area is given a number to distinguish it from other Homogeneous Areas (Example: HA-01A).
A CAD drawing(s) demonstrating the location of each collected bulk building material sample has been included in this section, as well as a CAD drawing(s) depicting the location of asbestos-containing homogeneous areas.
LIMITATIONS
Micro Air’s scope of services was limited primarily to accessible interior building materials.
While Micro Air made every effort to perform a thorough survey, the possibility exists that materials containing asbestos were not identified, inaccessible, or different from those identified at other locations. The findings and opinions presented are indicative of conditions on the date of our site inspection and should not be relied upon to represent conditions at substantially later dates, due to possible changes in the condition of building materials, renovations, and repairs. Additionally, most of the buildings located at this VA facility have steam pipes running underground to supply heat to each building. This material was inaccessible at the time of this inspection. All pipes located in wall chases, underground, in the crawlspace of a building, etc., is assumed to be ACM until tested and proven otherwise.
VAMC - DALLAS, TX
HOMOGENEOUS SAMPLE AREA SUMMARY
THE FOLLOWING TABLE DENOTES THE HOMOGENEOUS AREAS
IDENTIFIED IN BUILDING 8. THE TABLE INDICATES THE NUMBER OF
BULK BUILDING MATERIAL SAMPLES COLLECTED FOR EACH
HOMOGENEOUS AREA AND WHETHER THE HOMOGENEOUS AREA WAS
ASBESTOS-CONTAINING. ADDITIONALLY, ESTIMATED QUANTITIES OF
THE VARIOUS BUILDING MATERIALS SAMPLED HAVE ALSO BEEN
INCLUDED IN THE TABLE.
VAMC; DALLAS, TX
HOMOGENEOUS SAMPLE AREA SUMMARY
Homogeneous Area #
Sample Type Asbestos-containing
# of Samples Collected
Est.
Quantity
HA-01 Spray-On Ceiling Texture (White)
No 3 120 SF
HA-02 Sprinkler Pipe Insulation with Tan and White
Mastic
No 3 40 LF
HA-03 Steam Pipe Insulation (Beige & White)
Yes 1 1000 LF
HA-04 12" x 12" Vinyl Floor Tile, Tan with Yellow Mastic
(Type I)
No 3 340 SF
HA-05 12" x 12" Vinyl Floor Tile, White with Pastel Specks & Yellow Mastic (Type II)
No 3 470 SF
HA-06 12" x 12" Vinyl Floor Tile, Pink, Green & Purple
Pattern & Yellow Mastic (Type III)
No 3 780 SF
HA-07 12" x 12" Vinyl Floor Tile, White with Specks &
Yellow Mastic (Type IV)
No 3 40 SF
HA-08 Vinyl Sheet Flooring, Gray with Yellow Mastic
No 3 100 SF
HA-09 Vinyl Sheet Flooring, Creme with Yellow
Mastic
No 3 150 SF
HA-10 2' x 2' Ceiling Tile, White (Type I)
No 3 6,300 SF
HA-11 4' x 2' Ceiling Tile, White (Type II)
No 3 1,630 SF
HA-12 1' x 1' Ceiling Tile, White No 3 25 SF
MICRO AIR OF TEXAS, INC. VAMC; Dallas, Texas - Building 8 4
Homogeneous Area #
Sample Type Asbestos-containing
# of Samples Collected
Est.
Quantity
HA-13 Brown Mastic Above Ceiling Tiles On Plaster
Ceiling
No 3 6 SF
HA-14 Filler, Peach, Above Ceiling Tile on Plaster
Ceiling
No 3 5 SF
HA-15 6" Cove Base, Taupe with Tan Mastic
No 3 140 LF
HA-16 6" Cove Base, Black with Beige Mastic
No 3 16 LF
HA-17 6" Cove Base, Light Gray with Beige Mastic
No 4 55 LF
HA-18 6" Cove Base, Red/Brown with Tan
Mastic
No 3 20 LF
HA-19 6" Cove Base, Turquoise with Beige Mastic
No 3 1,200 LF
HA-20 Stair Tread Mastic, Tan No 3 28 LF
HA-21 6" Cove Base, Maroon & Tan Mastic
No 3 30 LF
HA-22 3" Cove Base, Blue/Gray with Beige Mastic
No 3 40 LF
HA-23 6" Cove Base, Turquoise with Yellow Mastic
No 3 380 LF
HA-24 6" Cove Base, Tan with Beige Mastic
No 3 42 LF
HA-25 Sheet Rock (Brown & Peach), Tape & Joint
Compound
No 3 14,800 SF
HA-26 Sheet Rock (Brown & White) with Vinyl Wall
Cover
No 3 3,500 SF
MICRO AIR OF TEXAS, INC. VAMC; Dallas, Texas - Building 8 5
Homogeneous Area #
Sample Type Asbestos-containing
# of Samples Collected
Est.
Quantity
HA-27 Wall Texture (White) & Sheet Rock (Brown &
White)
No 3 720 SF
HA-28 Pressed Board, Brown No 3 500 SF
HA-29 Plaster No 3 7,500 SF
HA-30 Sink Soundproofing Undercoat, Black
No 1 2 SF
HA-31 Tar/Felt Paper, Black No 1 1,400 SF
HA-32 Waterproofing (Exterior Brick), Black
No 1 2,800 SF
HA-33 Waterproofing (Concrete Basement Window
Wells) Black
Yes 1 500 SF
HA-34 Firestop Sealant, Red No 2 1 SF
HA-35 Filler Caulk, White No 1 1 SF
HA-36 Door Caulk, Exterior, White
No 1 30 LF
HA-37 Window Caulk, Exterior, Black
No 1 360 LF
HA-38 Window Caulk Exterior, Gray
No 1 360 LF
MICRO AIR OF TEXAS, INC. VAMC; Dallas, Texas - Building 8 6
Date Received: 28-Jan-2010 03-Feb-2010Date Analyzed:
JH1031780J3 Order #:
VAMC - DALLAS - BLDG 8
1052 Hercules Drive Houston TX 77058
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Asbestos (Yes/No)
Sample Description Asbestos Constituents
Sample ID # Location Non-Asbestos Constituents
J3 Resources, Inc.
6110 W. 34th Street, Houston, Texas 77092
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
04-Feb-2010Date Reported:
NoLAYER 1 Floor Tile, Beige/ Tan, Homogeneous
None Detected0801 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Mastic, Yellow, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
NoLAYER 1 Floor Tile, Beige/ Tan, Homogeneous
None Detected0802 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Mastic, Yellow, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
NoLAYER 1 Floor Tile, Beige/ Tan, Homogeneous
None Detected0803 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Mastic, Yellow, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
Cellulose FiberNoMastic, Tan, Homogeneous None Detected0804 <1%
Other Non-Fibrous Material 100%
Cellulose FiberNoMastic, Tan, Homogeneous None Detected0805 <1%
Other Non-Fibrous Material 100%
Brett Colbert Analyst
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 1 of 20
Lab DirectorLee W. Poye
JH1031780J3 Order #:
VAMC - DALLAS - BLDG 8
1052 Hercules Drive Houston TX 77058
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Asbestos (Yes/No)
Sample Description Asbestos Constituents
Sample ID # Location Non-Asbestos Constituents
J3 Resources, Inc.
6110 W. 34th Street, Houston, Texas 77092
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
04-Feb-2010Date Reported:
Cellulose FiberNoMastic, Beige, Homogeneous None Detected0806 <1%
Other Non-Fibrous Material 100%
NoLAYER 1 Floor Tile, White, Homogeneous
None Detected0807 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Mastic, Yellow, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
NoLAYER 1 Floor Tile, White, Homogeneous
None Detected0808 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Mastic, Yellow, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
NoLAYER 1 Floor Tile, White, Homogeneous
None Detected0809 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Mastic, Yellow, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
NoLAYER 1 Paint/ Texture, Green/ White, Homogeneous
None Detected0810 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Wallboard, Brown/ White, Homogeneous
None Detected 30%
Other Non-Fibrous Material 70%
Brett Colbert Analyst
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 2 of 20
JH1031780J3 Order #:
VAMC - DALLAS - BLDG 8
1052 Hercules Drive Houston TX 77058
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Asbestos (Yes/No)
Sample Description Asbestos Constituents
Sample ID # Location Non-Asbestos Constituents
J3 Resources, Inc.
6110 W. 34th Street, Houston, Texas 77092
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
04-Feb-2010Date Reported:
NoLAYER 1 Paint/ Texture, Green/ White, Homogeneous
None Detected0811 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Wallboard, Brown/ White, Homogeneous
None Detected 30%
Other Non-Fibrous Material 70%
NoLAYER 1 Paint/ Texture, Green/ White, Homogeneous
None Detected0812 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Wallboard, Brown/ White, Homogeneous
None Detected 30%
Other Non-Fibrous Material 70%
Cellulose Fiber Fibrous Glass
NoCeiling Tile, White/ Tan, Homogeneous
None Detected0813 55% 15%
Other Non-Fibrous Material 30%
Cellulose Fiber Fibrous Glass
NoCeiling Tile, White/ Tan, Homogeneous
None Detected0814 55% 15%
Other Non-Fibrous Material 30%
Cellulose Fiber Fibrous Glass
NoCeiling Tile, White/ Tan, Homogeneous
None Detected0815 55% 15%
Other Non-Fibrous Material 30%
Brett Colbert Analyst
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 3 of 20
JH1031780J3 Order #:
VAMC - DALLAS - BLDG 8
1052 Hercules Drive Houston TX 77058
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Asbestos (Yes/No)
Sample Description Asbestos Constituents
Sample ID # Location Non-Asbestos Constituents
J3 Resources, Inc.
6110 W. 34th Street, Houston, Texas 77092
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
04-Feb-2010Date Reported:
NoLAYER 1 Floor Tile, Tan/ Black, Homogeneous
None Detected0816 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Mastic, Yellow, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
NoLAYER 1 Floor Tile, Tan/ Black, Homogeneous
None Detected0817 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Mastic, Yellow, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
NoLAYER 1 Floor Tile, Tan/ Black, Homogeneous
None Detected0818 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Mastic, Yellow, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
Cellulose FiberNoSink Undercoat, Black, Homogeneous
None Detected0819 <1%
Other Non-Fibrous Material 100%
Cellulose FiberNoFelt, Black, Homogeneous None Detected0820 65%
Other Non-Fibrous Material 35%
Brett Colbert Analyst
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 4 of 20
JH1031780J3 Order #:
VAMC - DALLAS - BLDG 8
1052 Hercules Drive Houston TX 77058
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Asbestos (Yes/No)
Sample Description Asbestos Constituents
Sample ID # Location Non-Asbestos Constituents
J3 Resources, Inc.
6110 W. 34th Street, Houston, Texas 77092
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
04-Feb-2010Date Reported:
NoLAYER 1 Mastic, Tan, Homogeneous
None Detected0821 Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
NoLAYER 2 Wrap, White/ Silver, Homogeneous
None Detected 60% 3%
Other Non-Fibrous Material 37%
Fibrous GlassNoLAYER 3 Insulation, Yellow, Homogeneous
None Detected 90%
Other Non-Fibrous Material 10%
Cellulose FiberNoLAYER 1 Mastic, White, Homogeneous
None Detected0822 3%
Other Non-Fibrous Material 97%
Cellulose Fiber Fibrous Glass
NoLAYER 2 Wrap, White/ Silver, Homogeneous
None Detected 60% 3%
Other Non-Fibrous Material 37%
Fibrous GlassNoLAYER 3 Insulation, Yellow, Homogeneous
None Detected 90%
Other Non-Fibrous Material 10%
Brett Colbert Analyst
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 5 of 20
JH1031780J3 Order #:
VAMC - DALLAS - BLDG 8
1052 Hercules Drive Houston TX 77058
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Asbestos (Yes/No)
Sample Description Asbestos Constituents
Sample ID # Location Non-Asbestos Constituents
J3 Resources, Inc.
6110 W. 34th Street, Houston, Texas 77092
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
04-Feb-2010Date Reported:
Cellulose FiberNoLAYER 1 Mastic, White, Homogeneous
None Detected0823 3%
Other Non-Fibrous Material 97%
Cellulose Fiber Fibrous Glass
NoLAYER 2 Wrap, White/ Silver, Homogeneous
None Detected 60% 3%
Other Non-Fibrous Material 37%
Fibrous GlassNoLAYER 3 Insulation, Yellow, Homogeneous
None Detected 90%
Other Non-Fibrous Material 10%
NoFire Stop, Red, Homogeneous None Detected0824 Other Non-Fibrous Material 100%
NoLAYER 1 Cove Base, Black, Homogeneous
None Detected0825 Other Non-Fibrous Material 100%
NoLAYER 2 Mastic, Beige, Homogeneous
None Detected Other Non-Fibrous Material 100%
NoLAYER 1 Cove Base, Black, Homogeneous
None Detected0826 Other Non-Fibrous Material 100%
NoLAYER 2 Mastic, Beige, Homogeneous
None Detected Other Non-Fibrous Material 100%
Brett Colbert Analyst
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 6 of 20
JH1031780J3 Order #:
VAMC - DALLAS - BLDG 8
1052 Hercules Drive Houston TX 77058
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Asbestos (Yes/No)
Sample Description Asbestos Constituents
Sample ID # Location Non-Asbestos Constituents
J3 Resources, Inc.
6110 W. 34th Street, Houston, Texas 77092
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
04-Feb-2010Date Reported:
NoLAYER 1 Cove Base, Black, Homogeneous
None Detected0827 Other Non-Fibrous Material 100%
NoLAYER 2 Mastic, Beige, Homogeneous
None Detected Other Non-Fibrous Material 100%
NoLAYER 1 Cove Base, Gray, Homogeneous
None Detected0828 Other Non-Fibrous Material 100%
NoLAYER 2 Mastic, Beige, Homogeneous
None Detected Other Non-Fibrous Material 100%
NoLAYER 1 Cove Base, Gray, Homogeneous
None Detected0829 Other Non-Fibrous Material 100%
NoLAYER 2 Mastic, Beige, Homogeneous
None Detected Other Non-Fibrous Material 100%
NoMastic, Beige, Homogeneous None Detected0830 Other Non-Fibrous Material 100%
Cellulose FiberNoMastic, Tan, Homogeneous None Detected0831 <1%
Other Non-Fibrous Material 100%
Cellulose FiberNoMastic, Tan, Homogeneous None Detected0832 <1%
Other Non-Fibrous Material 100%
Brett Colbert Analyst
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 7 of 20
JH1031780J3 Order #:
VAMC - DALLAS - BLDG 8
1052 Hercules Drive Houston TX 77058
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Asbestos (Yes/No)
Sample Description Asbestos Constituents
Sample ID # Location Non-Asbestos Constituents
J3 Resources, Inc.
6110 W. 34th Street, Houston, Texas 77092
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
04-Feb-2010Date Reported:
Cellulose FiberNoMastic, Tan, Homogeneous None Detected0833 <1%
Other Non-Fibrous Material 100%
HairNoPaint/ Plaster, White/ Tan, Homogeneous
None Detected0834 <1%
Other Non-Fibrous Material 100%
NoLAYER 1 Paint/ Skim Coat, White, Homogeneous
None Detected0835 Other Non-Fibrous Material 100%
HairNoLAYER 2 Plaster, Tan, Homogeneous
None Detected 1%
Other Non-Fibrous Material 99%
NoLAYER 1 Paint/ Skim Coat, White, Homogeneous
None Detected0836 Other Non-Fibrous Material 100%
HairNoLAYER 2 Plaster, Tan, Homogeneous
None Detected 1%
Other Non-Fibrous Material 99%
NoLAYER 1 Cove Base, Green, Homogeneous
None Detected0837 Other Non-Fibrous Material 100%
NoLAYER 2 Mastic, Beige, Homogeneous
None Detected Other Non-Fibrous Material 100%
Brett Colbert Analyst
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 8 of 20
JH1031780J3 Order #:
VAMC - DALLAS - BLDG 8
1052 Hercules Drive Houston TX 77058
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Asbestos (Yes/No)
Sample Description Asbestos Constituents
Sample ID # Location Non-Asbestos Constituents
J3 Resources, Inc.
6110 W. 34th Street, Houston, Texas 77092
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
04-Feb-2010Date Reported:
NoLAYER 1 Cove Base, Green, Homogeneous
None Detected0838 Other Non-Fibrous Material 100%
NoLAYER 2 Mastic, Beige, Homogeneous
None Detected Other Non-Fibrous Material 100%
NoLAYER 1 Cove Base, Green, Homogeneous
None Detected0839 Other Non-Fibrous Material 100%
NoLAYER 2 Mastic, Beige, Homogeneous
None Detected Other Non-Fibrous Material 100%
Cellulose FiberNoMastic, Tan, Homogeneous None Detected0840 <1%
Other Non-Fibrous Material 100%
Cellulose FiberNoMastic, Tan, Homogeneous None Detected0841 <1%
Other Non-Fibrous Material 100%
Cellulose FiberNoMastic, Tan, Homogeneous None Detected0842 <1%
Other Non-Fibrous Material 100%
Brett Colbert Analyst
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 9 of 20
JH1031780J3 Order #:
VAMC - DALLAS - BLDG 8
1052 Hercules Drive Houston TX 77058
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Asbestos (Yes/No)
Sample Description Asbestos Constituents
Sample ID # Location Non-Asbestos Constituents
J3 Resources, Inc.
6110 W. 34th Street, Houston, Texas 77092
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
04-Feb-2010Date Reported:
NoLAYER 1 Texture, White, Homogeneous
None Detected0843 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Tape, White, Homogeneous
None Detected 100%
NoLAYER 3 Joint Compound, White, Homogeneous
None Detected Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 4 Wallboard, Brown/ Peach, Homogeneous
None Detected 30%
Other Non-Fibrous Material 70%
NoLAYER 1 Texture, White, Homogeneous
None Detected0844 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Wallboard, Brown/ Peach, Homogeneous
None Detected 30%
Other Non-Fibrous Material 70%
NoLAYER 1 Texture, White, Homogeneous
None Detected0845 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Wallboard, Brown/ Peach, Homogeneous
None Detected 30%
Other Non-Fibrous Material 70%
Cellulose FiberNoCeiling Tile, White/ Brown, Homogeneous
None Detected0846 95%
Other Non-Fibrous Material 5%
Brett Colbert Analyst
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 10 of 20
JH1031780J3 Order #:
VAMC - DALLAS - BLDG 8
1052 Hercules Drive Houston TX 77058
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Asbestos (Yes/No)
Sample Description Asbestos Constituents
Sample ID # Location Non-Asbestos Constituents
J3 Resources, Inc.
6110 W. 34th Street, Houston, Texas 77092
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
04-Feb-2010Date Reported:
Cellulose FiberNoCeiling Tile, White/ Brown, Homogeneous
None Detected0847 95%
Other Non-Fibrous Material 5%
Cellulose FiberNoCeiling Tile, White/ Brown, Homogeneous
None Detected0848 95%
Other Non-Fibrous Material 5%
Cellulose Fiber Fibrous Glass
NoLAYER 1 Linoleum, Gray/ Various, Homogeneous
None Detected0849 20% 5%
Other Non-Fibrous Material 75%
Cellulose FiberNoLAYER 2 Mastic, Yellow, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
NoLAYER 1 Linoleum, Gray/ Various, Homogeneous
None Detected0850 20% 5%
Other Non-Fibrous Material 75%
Cellulose FiberNoLAYER 2 Mastic, Yellow, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
Brett Colbert Analyst
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 11 of 20
JH1031780J3 Order #:
VAMC - DALLAS - BLDG 8
1052 Hercules Drive Houston TX 77058
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Asbestos (Yes/No)
Sample Description Asbestos Constituents
Sample ID # Location Non-Asbestos Constituents
J3 Resources, Inc.
6110 W. 34th Street, Houston, Texas 77092
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
04-Feb-2010Date Reported:
Cellulose Fiber Fibrous Glass
NoLAYER 1 Linoleum, Gray/ Various, Homogeneous
None Detected0851 20% 5%
Other Non-Fibrous Material 75%
Cellulose FiberNoLAYER 2 Mastic, Yellow, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
NoLAYER 1 Cove Base, Gray, Homogeneous
None Detected0852 Other Non-Fibrous Material 100%
NoLAYER 2 Mastic, Beige, Homogeneous
None Detected Other Non-Fibrous Material 100%
Cellulose FiberNoMastic, Tan, Homogeneous None Detected0853 <1%
Other Non-Fibrous Material 100%
Cellulose FiberNoMastic, Tan, Homogeneous None Detected0854 <1%
Other Non-Fibrous Material 100%
Cellulose FiberNoMastic, Beige, Homogeneous None Detected0855 <1%
Other Non-Fibrous Material 100%
NoFire Stop, Red, Homogeneous None Detected0856 Other Non-Fibrous Material 100%
Brett Colbert Analyst
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 12 of 20
JH1031780J3 Order #:
VAMC - DALLAS - BLDG 8
1052 Hercules Drive Houston TX 77058
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Asbestos (Yes/No)
Sample Description Asbestos Constituents
Sample ID # Location Non-Asbestos Constituents
J3 Resources, Inc.
6110 W. 34th Street, Houston, Texas 77092
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
04-Feb-2010Date Reported:
NoCaulking, White, Homogeneous None Detected0857 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 1 Wrap, Beige, Homogeneous
None Detected0858 100%
YesLAYER 2 Insulation, White, Homogeneous
Chrysotile Amosite
4% 3%
Other Non-Fibrous Material 93%
Cellulose FiberNoTar, Black, Homogeneous None Detected0859 <1%
Other Non-Fibrous Material 100%
NoLAYER 1 Spray-On, White, Homogeneous
None Detected0860 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Tape, White, Homogeneous
None Detected 100%
NoLAYER 1 Spray-On, White, Homogeneous
None Detected0861 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Tape, White, Homogeneous
None Detected 100%
NoSpray-On, White, Homogeneous None Detected0862 Other Non-Fibrous Material 100%
Brett Colbert Analyst
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 13 of 20
JH1031780J3 Order #:
VAMC - DALLAS - BLDG 8
1052 Hercules Drive Houston TX 77058
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Asbestos (Yes/No)
Sample Description Asbestos Constituents
Sample ID # Location Non-Asbestos Constituents
J3 Resources, Inc.
6110 W. 34th Street, Houston, Texas 77092
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
04-Feb-2010Date Reported:
NoLAYER 1 Cove Base, Gray, Homogeneous
None Detected0863 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Mastic, Beige, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
NoLAYER 1 Cove Base, Gray, Homogeneous
None Detected0864 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Mastic, Beige, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
NoLAYER 1 Cove Base, Gray, Homogeneous
None Detected0865 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Mastic, Beige, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
NoLAYER 1 Wall Cover, White, Homogeneous
None Detected0866 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Wallboard, Brown/ White, Homogeneous
None Detected 30%
Other Non-Fibrous Material 70%
Brett Colbert Analyst
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 14 of 20
JH1031780J3 Order #:
VAMC - DALLAS - BLDG 8
1052 Hercules Drive Houston TX 77058
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Asbestos (Yes/No)
Sample Description Asbestos Constituents
Sample ID # Location Non-Asbestos Constituents
J3 Resources, Inc.
6110 W. 34th Street, Houston, Texas 77092
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
04-Feb-2010Date Reported:
NoLAYER 1 Wall Cover, White, Homogeneous
None Detected0867 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Wallboard, Brown/ White, Homogeneous
None Detected 30%
Other Non-Fibrous Material 70%
NoLAYER 1 Wall Cover, White, Homogeneous
None Detected0868 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Wallboard, Brown/ White, Homogeneous
None Detected 30%
Other Non-Fibrous Material 70%
Cellulose Fiber Fibrous Glass
NoCeiling Tile, White/ Tan, Homogeneous
None Detected0869 55% 15%
Other Non-Fibrous Material 30%
Cellulose Fiber Fibrous Glass
NoCeiling Tile, White/ Tan, Homogeneous
None Detected0870 55% 15%
Other Non-Fibrous Material 30%
Cellulose Fiber Fibrous Glass
NoCeiling Tile, White/ Tan, Homogeneous
None Detected0871 55% 15%
Other Non-Fibrous Material 30%
Brett Colbert Analyst
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to EPA test methods listed above and are subject to the inherent limitations of Polarized Light Microscopy and interference of matrix components. J3 recommends TEM confirmation of non-friable organically bound materials reported as < 1% by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 15 of 20
JH1031780J3 Order #:
VAMC - DALLAS - BLDG 8
1052 Hercules Drive Houston TX 77058
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Asbestos (Yes/No)
Sample Description Asbestos Constituents
Sample ID # Location Non-Asbestos Constituents
J3 Resources, Inc.
6110 W. 34th Street, Houston, Texas 77092
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
04-Feb-2010Date Reported:
NoLAYER 1 Floor Tile, Beige/ Green, Homogeneous
None Detected0872 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Mastic, Yellow, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
NoLAYER 1 Floor Tile, Beige/ Green, Homogeneous
None Detected0873 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Mastic, Yellow, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
NoLAYER 1 Floor Tile, Beige/ Green, Homogeneous
None Detected0874 Other Non-Fibrous Material 100%
Cellulose FiberNoLAYER 2 Mastic, Yellow, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
Synthetic FiberNoMastic, Yellow, Homogeneous None Detected0875 <1%
Other Non-Fibrous Material 100%
Synthetic FiberNoMastic, Yellow, Homogeneous None Detected0876 <1%
Other Non-Fibrous Material…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .