Technical Questions Revision to Response No. 3.pdf
PDF 88 KB Posted
- Solicitation number
- 36C77622B0012
About this file
This document contains a government response to technical questions regarding solicitation number 36C77622B0012 for a Medical Specialty Clinic construction project at Mather. The response clarifies that building number signs for the project are to be made of anodized aluminum, not stainless steel as specified in Section 10 14 19 of the solicitation. Reference is made to an updated table of contents omitting Section 10 14 19, indicating it no longer applies. The solicitation seeks a contractor to prepare the site for and perform all work involved in constructing a 612-122 square foot Medical Specialties building at the VA facility in Mather, California. Scope of work includes site preparation, demolition, foundations, superstructure, mechanical, electrical, plumbing, landscaping and other site improvements in accordance with provided drawings and specifications.
View the file
Other files
Show all 27
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Solicitation # 36C77622B0012 Medical Specialty Clinic - Mather Technical Questions Revision to Response #3
Question #3:
ALUMINUM VS. STAINLESS STEEL BUILDING NUMBER SIGNS: In the Plans for this project, Building Number signs are mounted on both the East Elevation (3/A-201) and North Elevation (4/A-201) and are described by Note 14 as follows:
18” TALL, 2” DEEP ANODIZED ALUMINUM BUILDING NUMBER. ATTACH VIA 2”
ALUMINUM STANDOFFS. CENTER IN EIFS PANEL. COORDINATE FONT STYLE, COLOR,
AND FINISH FOR CONFORMANCE WITH VA CAMPUS STYLE. COORDINATE WITH COR.
However, the only relevant Specification Section provided is Section 10 14 19 “FABRICATED STAINLESS STEEL DIMENSIONAL GRAPHICS” which classifies these letters as stainless steel.
Please verify the intended exterior dimensional metal letter material as aluminum or stainless steel, and if the letters are not to be stainless steel, please provide a detailed revised specification.
Government Revised Response:
Building number signs are to be anodized aluminum. Reference Updated Table of Contents w- Omitted Sections – Section 10 14 00, which was posted with Amendment 0004. Please be advised that Section 10 14 19 no longer applies to this solicitation.
File details come from the government source that posted it. Updated .