Attachment Q - 08 36 16.3 Barn (Sliding) Door.pdf

CONSTRUCT PRIMARY CARE SERVICES MINOR 612-400

VAMC MATHER, CALIFORNIA FINAL BID DOCUMENTS

ADVANCE DESIGN CONSULTANTS, INC. 08 36 16.13 - 1

03/09/2018

SECTION 08 36 16.13

BARN (SLIDING) DOOR

PART 1 - GENERAL

1.1 SUMMARY

A. Sliding Barn Doors - flush wood aluminum frames and related hardware.

1.2 RELATED SECTION

A. Section 08 14 00 Interior Wood Doors

1.3 SUBMITTALS

A. Comply with Section 01 33 00 – Submittal Procedures B. Product Data: Submit manufacturer’s product data, including installation instructions.

C. Shop Drawings: Submit manufacturer’s shop drawings, including plans, elevations, sections, and details, indicating dimensions, tolerances, materials, components, hardware, finish, options, and accessories. Shop Drawings to show required blocking by others.

D. Samples: Submit manufacturer’s samples of the following sliding door components:

1. Door veneer or laminate sample

2. Aluminum Frame finish sample

E. Manufacturer’s Certification: Submit manufacturer’s certification that materials comply with specified requirements and are suitable for intended application.

F. Warranty Documentation: Submit manufacturer’s standard warranty.

G. Test Reports: Submit acoustical reports or UL1784 as applicable.

1.4 QUALITY ASSURANCE

A. Product Options: Drawings indicate size, profiles, and dimensional requirements of interior aluminum frames and doors.

B. Source: Obtain sliding aluminum framed doors and hardware from single source.

C. Manufacturer's Qualifications: Manufacturer regularly engaged for past 5 years in manufacture of sliding doors similar to that specified.

1.5 REFERENCES

A. ANSI – American National Standards Institute

1. ANSI 156.18 Materials and Finishes

CONSTRUCT PRIMARY CARE SERVICES MINOR 612-400

ADVANCE DESIGN CONSULTANTS, INC. 08 36 16.13 - 2

2. ANSI A117.1 Specifications for making buildings and facilities usable by physically handicapped people.

B. BHMA – Builders Hardware Manufacturers Association C. DHI – Door and Hardware Institute D. NFPA – National Fire Protection Association

1. NFPA 80 – Fire Doors and Windows

2. NFPA 101 – Life Safety code

3. NFPA 105 – Smoke and Draft Control Door Assemblies

4. NFPA 252 – Fire Tests of Doors Assemblies

E. AWS – Architectural Woodwork Standards

1.6 PERFORMANCE

A. Aluminum perimeter frames with integral acoustic seals B. Soft self-closing mechanism integrated with top track C. Concealed door guide

1.7 DELIVERY: STORAGE AND PROTECTION

A. Delivery and Acceptance Requirements: Deliver materials to site in manufacturer’s original, unopened containers and packaging, with labels clearly identifying product name and manufacturer.

B. Notify manufacturer immediately of any shipping damage.

C. Storage and Handling Requirements:

1. Store and handle materials in accordance with manufacturer’s instructions.

2. Keep materials in manufacturer’s original, unopened containers and packaging until installation.

3. Store materials in clean, dry area indoors.

4. Protect materials and finish during storage, handling, and installation to prevent damage.

PART 2 - PRODUCTS

2.1 MANUFACTURER

A. AD SYSTEMS 2201 100th St. SW, Everett, WA 98204 | Website:

http://specADsystems.com | Phone: 425-374-1360 | Attn: Estimating:

estimating@specADsystems.com

B. Or equal – per Division 1 requirements.

2.2 INTERIOR SLIDING ALUMINUM-FRAMED DOORS AND PARTITIONS

http://specadsystems.com/ mailto:estimating@specADsystems.com

CONSTRUCT PRIMARY CARE SERVICES MINOR 612-400

ADVANCE DESIGN CONSULTANTS, INC. 08 36 16.13 - 3

A. Interior Aluminum-Framed Top-Hung Sliding Doors: Model: AD Systems High Performance Sliding Door System by AD Systems or approved equal

B. Specified Wall Thickness: See architectural drawings C. Frame Profiles: Extruded aluminum frame “wrap” frame with integral vertical jamb (stile pocket), per drawings.

1. Finish:

a. Standard: Painted Hardcoat (Kynar) Finish. Meets AAMA 2604 Standard Colors: Light Sequin 789G048

D. Door Leafs, per drawings. All Doors to be factory machined for hardware including pilot and function holes.

1. 1-3/4" Flush Wood Door: Reference Spec Section 08200 Wood Doors

E. Door Components:

1. Single Top Track: AD Systems extruded aluminum track by AD Systems

2. Valances: Extruded aluminum with integral end caps

a. Standard square valance

3. Top Rollers: tandem nylon roller sized to match door weight

4. Concealed Floor Guide: Integral Jamb floor guide by AD Systems

5. Soft-Closer: Soft and self-closing damper mechanism at both sides of door leaf

6. Handles:

a. AD Systems Standard Ladder Pull: 16” long x 1” diameter. Finish:

US32D Satin Stainless Steel

F. Accessories:

1. Door Locks:

a. Mortise Latch and Lock Options: Contact AD Systems for assistance

1) ADA-4 Self Latching - Thumbturn with Key Lock & Lever

2) Magnetic Lock – for card reader.

2. Self-Closing Spring Mechanism

3. Automatic Door Bottom for improved acoustical performance

PART 3 - EXECUTION

3.1 EXAMINATION

A. Examine wall openings to receive sliding doors for plumb, level, and square.

Note: Finish door operation will be affected by out of tolerance framing.

CONSTRUCT PRIMARY CARE SERVICES MINOR 612-400

ADVANCE DESIGN CONSULTANTS, INC. 08 36 16.13 - 4

B. Verify dimensions of wall openings.

C. Examine surfaces to receive top and bottom guide.

D. Notify COR of conditions that would adversely affect installation or subsequent use of sliding doors.

E. Do not begin installation until unacceptable conditions are corrected.

F. Base of door side to be flush or minimal. Rubber Base acceptable.

3.2 INSTALLATION

A. Install sliding doors in accordance with manufacturer’s instructions at locations indicated on the Drawings.

B. Install sliding doors plumb, level, square, and in proper alignment.

C. Install sliding doors to close against walls without gaps D. Install sliding doors to open and close smoothly.

E. Anchor sliding doors securely in place to supports. Refer to the drawing header details for blocking required full length of track.

3.3 ADJUSTING

A. Adjust sliding doors for proper operation in accordance with manufacturer’s instructions.

B. Adjust sliding doors to operate smoothly without binding.

C. Repair minor damages to finish in accordance with manufacturer’s instructions and as approved by Architect.

3.4 CLEANING

A. Clean sliding doors promptly after installation in accordance with manufacturer’s instructions.

B. Do not use harsh cleaning materials or methods that could damage materials or finish.

3.5 PROTECTION

A. Protect installed sliding doors from damage during construction.

END OF SECTION 08 36 16.3