36C25818B0305-0003008.pdf

a company

Zurn Industries, LLC | Wilkins 1747 Commerce Way, Paso Robles, CA U.S.A. 93446 � Ph. 855-663-9876, Fax 805-238-5766

In Canada | Zurn Industries Limited 3544 Nashua Drive, Mississauga, Ontario L4V 1L2 � Ph. 905-405-8272, Fax 905-405-1292 www.zurn.com

Rev. C

Date: 7/14

Document No. BF-975XLST

Product No. Model 975XLST

Model 975XLST Stainless Steel Reduced Pressure Principle Back! ow Prevention Assembly

Options (Suffixes can be combined) c - with full port QT ball valves (standard) c L - less shut-off valves

Accessories c Air gap (Model AG) c Repair kits (rubber only) c QT-SET Quick Test Fitting Set

A

G

B

CD

F

E

W

ILKIN

S

XL

Application Designed for installation on potable water lines to protect against both backsiphonage and backpressure of contami-nated water into the potable water supply. The Model 975XLST provides protection where a potential health hazard exists. The valve’s stainless steel construction is ideal in those systems that utilize liquids corrosive to copper alloys. Potential applica-tions include: medical diagnostic equipment, food processing, distilleries, breweries, etc. Additionally, the 975XLST is ideal for applications requiring valves that are Lead-Free*.

Standards Compliance

• ASSE® Listed 1013

• �Approved by the Foundation for Cross Connection

Control and Hydraulic Research at the University of

Southern California

• Certified to NSF/ANSI 372* by IAPMO R&T

*(0.25% MAX. WEIGHTED AVERAGE LEAD CONTENT)

Materials Main valve body Stainless steel ASTM A 351

Access covers Stainless steel ASTM A 351

Internals Stainless steel, 300 Series

Elastomers Silicone (FDA approved)

Buna nitrile (FDA approved)

Polymers Noryl™, NSF Listed

Springs Stainless steel, 300 series

Ball Valves Stainless steel ASTM A 351

Test Cocks Stainless steel ASTM A 351

Features Sizes: 3/8", 1/2"

Maximum working water pressure 175 psi

Maximum working water temperature 180° F

Threaded connections (FNPT) ANSI B1.20.1

Relief Valve discharge port:

1/4” - 1/2” - 0.38 sq. in.

Dimensions & Weights (do not include pkg.)

dyamashiro Text Box

BFP-1

. / 0 1 2 3 4 5 6 7 1 8 0 / 9 4 : 8 ; 1 2 9 < / = = > 5 ? / 4 / @ 1 A B : 1 8 CFlow Characteristics

Zurn Industries, LLC | Wilkins 1747 Commerce Way, Paso Robles, CA U.S.A. 93446 � Ph. 855-663-9876, Fax 805-238-5766

In Canada | Zurn Industries Limited 3544 Nashua Drive, Mississauga, Ontario L4V 1L2 � Ph. 905-405-8272, Fax 905-405-1292 www.zurn.com Page 2 of 2

12" MIN.

30" MAX.

DIRECTION OF FLOW

AIR GAP.

DRAIN

0 63 9 12 15

FLOW RATES (GPM)

P R

E S

S U

R E

L O

S S

P

S

IG

P R

E S

S U

R E

L O

S S k p a

FLOW RATES (l/s)

MODEL 975XLST 3/8" & 1/2" (STANDARD & METRIC)

3/8" (9mm) 1/2" (15mm)

0.950.760.570.380.19

Typical Installation Local codes shall govern installation requirements. To be installed in accordance with the manufacturers’ instructions and the latest edition of the Uniform Plumbing Code. Unless otherwise specified, the assembly shall be mounted at a mini-mum of 12” (305mm) and a maximum of 30” (762mm) above adequate drains with sufficient side clearance for testing and maintenance. The installation shall be made so that no part of the unit can be submerged or where relief valve discharge could cause damage.

Speci" cations The Reduced Pressure Principle Backflow Preventer shall be certified to NSF/ANSI 372, shall be ASSE® Listed 1013, rated to 180° F and supplied with full port ball valves. The main body and access covers shall be stainless steel (ASTM A 351), the seat ring and all internal polymers shall be NSF® Listed Noryl™ and the seat disc elastomers shall be silicone. The checks shall be oriented at a 45° angle upward and accessible for maintenance without removing the relief valve or the entire device from the line. If installed indoors, the installation shall be supplied with an air gap and “y” type strainer. The Reduced Pressure

Principle Backflow Preventer shall be a ZURN WILKINS Model 975XLST.

INDOOR INSTALLATION

D E F E G H I J I K L M N G K O P M Q O R S T H F OT H F O U H V O W X I Y U O G Z [ W X I Y U O G \ S X I Y U O G \ W X I Y U O G\ Y ] ^ \ \ _ `\ Y R ^ _ _ ` W` Y ] ^ ` R a b\ Y _ ^ W Z b \ R` Y R ^ ] \ _ \ Z _ W\ ^ \ ` _ S _ Z R S\ \ Y R ^ _ ` ` W R Z Z S\ \ Y _ ^ ` _ R ] a ` b W_ ^ W _ Z ] \ S W \ a Z

F

IG

U R

E N

U M

B E

R D

R A

W N

B Y

D

IM

E N

S

IO

N S

A R

E S

U B

JE

C

T T

O M

A N

U

FA

C T

U R

E R

S T

O

LE

R A

N C

E A

N D

C H

A N

G E

W

IT

H O

U T

N O

T

IC

E

W

C A

N A

S S

U M

E N

O R

E S

P O

N S

IB

IL

IT

Y

F O

R U

S E

O F

S U

P E

R S

E D

E D

O R

V O

ID

D

AT

A

C H

E C

K E

D B

Y

A P

P R

O V

E D

B Y

D

AT

E

S

C A

LE

D R

A W

IN

G

N U

M B

E R

LOCATION

FIGURE NUMBERVOLUME

CUBIC FEET

WEIGHT

POUNDS

CKD. BYBYDATEREV. DESCRIPTION

S

IZ

E A N

O N

E

FLOOR OR SHOWER DRAINS

WITH ADJUSTABLE STRAINER HEADS

FUNCTION: General service floor drain for use in showers, toilets, kitchens and other finished areas where foot traffic is expected.

The round top strainer head is used for all types of poured finished floors. The square top is particularly adaptable to floors that are finished in material of square or straight line pattern. Reversible flashing collar permits adjustment of the strainer to meet finished floor level.

P J

T D

T D

5-

-8

S

Q

SEE PM0457 FOR

OPTIONAL STRAINER HEADS.

CLM 10/24/06

N 12/18/08 Addition to Variations JJ BW P 11-20-09 Revised Variations RN BW Q 11-18-11 Rev. Dwg., Var. TBW CR

NO-HUB to SPEEDI-SET RN

NOTE: Dimensions shown in parentheses are in millimeters.

Meets ASME Standard A112.6.3-2001 02(50), 03(75) or 04"(100) sizes only.

Strainer Size

B DIA or SQ

05 (125) 06 (150) 07 (180) 08 (205) •09 (230) •10 (255)

*Collar In High Position

X

MIN MAX

1 1/4(32) 2 1/4(57) 1 1/4(32) 2 1/4(57) 1 1/4(32) 2 1/4(57) 1 1/2(38) 2 1/2(64) 1 1/2(38) 2 3/8(60) 1 1/2(38) 2 3/8(60)

*Collar In Low

Position

XX

MIN MAX

3/4(19) 1 5/8(41) 3/4(19) 1 5/8(41) 7/8(22) 1 7/8(48) 1(25) 1 7/8(48) 1(25) 1 7/8(48) 1(25) 1 7/8(48)

Free Area

SQ IN

(SQ CM)

ROUND SQUARE

7(45) 6.5(42) 9(58) 12.5(81) 14(90) 11(71) 17(110) 14(90) 18(116) 16(103) 23(48) 16(103)

Outlet Size

02(50) 03(75) 04(100)

Nickel Bronze Strainer Head

05(125) DIA or SQ 06(150) DIA or SQ 08(205) DIA or SQ

Fig. 2005L……(A) ROUND TOP Fig. 2005L……(B) SQUARE TOP

Fig. 2005Y……(A) ROUND TOP Fig. 2005Y.……(B) SQUARE TOP

A (Pipe Size) = 02(50), 03(75), 04(100), 05(125) or 06(150)

SPEEDI-SET OUTLET

NO-HUB OUTLET

MAX

High Position

MAX

Low Position

MAX

High PositionLow

Position

MAX

Trap Primer Connection (When Specified)

XX-MIN X-MIN

4(100) 1 1/4 (32)

Trap Primer Connection (When Specified)

XX-MIN X-MIN

4(100)

Seepage Openings

Seepage Openings

**6 3/4 (170)

A

9 (230) DIA

B DIA or SQ

9 (230) DIA

B DIA or SQ

**6 3/4 (170)

A

1 1/4 (32)

▼ 2 5/8"(67)

▼ This dimension to internal stop of speedi-set gasket.

• Add 3/8"(10) to all min/max dimensions for round strainers.

* Collar is reversible to obtain extreme high and low strainer positions.

•• Not available for 5"(125) size strainer.

** MIN 6 3/4"(170) hole required for core drilled application.

REGULARLY FURNISHED:

Duco Cast Iron Body with Flashing Collar and Adjustable Strainer Head as Indicated by Suffix Letter Selected.

VARIATIONS:

Flapper Type Backwater Valve -V Hinged Grate -H L Speedi-Set Service Weight 2(50), 3(75) & 4"(100) only LXH Speedi-Set Extra Heavy 2(50), 3(75) & 4"(100) only Sediment Bucket -B Trap Primer Connection -P050 1/2" (13) & -P075 3/4" (19) Vandal Proof Screws -U Wide Flanged Strainer (Specify Fig. DX2005) T Threaded Outlet Heelproof Grate -HP -AHP (Round) or -BHP (Square)

OPTIONAL MATERIALS:

Bronze Body -BB Chrome Plated Strainer -CP Galvanized Cast Iron Body -G Nickel Bronze Strainer -NB Polished Bronze Strainer -PB Stainless Steel (Specify Fig. 9700-A)

JAY R.

SMITH MFG. CO.®

MEMBER OF ACORN’S FAMILY OF COMPANIES

POST OFFICE BOX 3237

MONTGOMERY, ALABAMA 36109-0237 (USA)

TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com

CUSTOMER

DRIVEN

SMITH®

MEMBER OF:

ASPE

SANITARY

E N G IN E E RINGPrevention Rather Than Cure dyamashiro

FD-1

B

H

FIGURE NUMBER

LOCATION

A

OPTIONAL STRAINER HEADS

ROUND STRAINER

MATERIALS:

Chrome Plated -CP Polished Bronze -PB

VARIATIONS:

*Hinged Grate (Specify Suffix -AH) Sediment Bucket -B Vandal Proof Screws -U

SUFFIX -A

B DIA 05 (125) 06 (150) 07 (180) 08 (205) 09 (230) 10 (255)

H 2 (51) 2 (51) 2 1/4 (57) 2 1/2 (64) 2 1/2 (64) 2 3/4 (70)

MIN 1 1/4 (32) 1 1/4 (32) 1 1/4 (32) 1 1/2 (38) 1 1/2 (38) 1 1/2 (38)

MAX 2 1/4 (57) 2 1/4 (57) 2 1/4 (57) 2 1/2 (64) 2 1/2 (64) 2 3/4 (70)X

Specify Type, Size & Finish eg: A05NB *Not available for 05" (125) size

SUFFIX -B

MATERIALS:

Chrome Plated -CP Flapper Type Backwater Valve

(Specify Suffix -BV) 05 (125), 06 (150), 07 (180) or 08" (205) sizes only *Hinged Grate (Specify Suffix -BH) Sediment Bucket -B Vandal Proof Screws -U

Polished Bronze -PB

VARIATIONS:

SQUARE STRAINER

B DIA 05 (125) 06 (150) 07 (180) 08 (205) 09 (230) 10 (255)

H 2 (51) 2 (51) 2 1/4 (57) 2 1/2 (64) 2 1/4 (57) 2 1/4 (57)

MIN 1 1/4 (32) 1 1/4 (32) 1 1/4 (32) 1 1/2 (38) 1 1/2 (38) 1 1/2 (38)

MAX 2 1/4 (57) 2 1/4 (57) 2 1/4 (57) 2 1/2 (64) 2 1/4 (57) 2 3/8 (60)X

Specify Type, Size & Finish eg: B05NB *Not available for 05" (125) size

B

H

Specify Type, Size & Finish eg: BSNB

SUFFIX -BS

MATERIALS:

Chrome Plated -CP Polished Bronze -PB

VARIATIONS:

Gasketed Water Tight Cover -GC Secured Cover -SC Secondary Strainer Grate-SG

STRAINER HEAD w/SQUARE HINGED COVER

3 1/8

SUFFIX -C Specify Type, Size & Finish eg: C06NB

REINFORCED ROUND STRAINER

MATERIALS:

Chrome Plated -CP Polished Bronze -PB

VARIATIONS:

Flapper Type Backwater Valve (Specify Suffix -CV) Sediment Bucket -B Vandal Proof Screws -U

B DIA 05 (125) 06 (150) 08 (205) 10 (255)

H 2 (51) 2 (51) 2 1/2 (64) 2 3/4 (70)

MIN 1 1/4 (32) 1 1/4 (32) 1 1/2 (38) 1 7/8 (48)

MAX 2 1/4 (57) 2 1/4 (57) 2 1/2 (64) 2 3/4 (70)

FUNCTION: Used in finished floors where light wheeled loads are anticipated.

B

H

TILE FLANGE

Specify Type, Size & Finish eg: F06NB

FUNCTION: Provides integral flange set 5/32" (4) below rim to receive floor covering. Flange may have option of tapped holes for securing pan and gasket.

MATERIALS:

Chrome Plated -CP Polished Bronze -PB

VARIATIONS:

X

MIN MAX

1 1/4 (32) 2 1/8 (54)

7 1/2

5/32

SUFFIX -F37-F38 Specify Type, Size & Finish eg: F37NB F38CP

FUNCTION: Used in a non-traffic area when a funnel type strainer head is required and space does not allow use of the 3500 series funnel. The extended rim allows use as an anti-flood and anti-splash drip pan.

MATERIALS:VARIATIONS:

Flapper Type Backwater Valve (Specify Suffix -F37V or F38V)

Cast Iron -CI Chrome Plated -CP Galvanized Cast Iron -G Polished Bronze -PB

ADJUSTABLE STRAINER HEAD

B

H

SUFFIX -F37 -F38

B DIA 07 (180) 09 (230)

H 3 1/4 (83) 3 1/2 (89)

MIN 2 5/8 (67) 2 3/4 (70)

MAX 3 1/2 (89) 3 1/2 (89)X

2010 SERIES OPTIONAL

STRAINER HEADS

1 0f 2

S E

R

IE

S O

P T

IO

N

A L

S T

R A

IN

E

R H

E A

D S

F

IG

U R

N U

M B

E R

D R

A W

N B

Y

C H

E C

K E

D B

Y

A P

P R

O V

E D

B Y

D

AT

E

S

C A

LE

D

R A

W

IN

G N

U M

B E

R

D

IM

E N

S

IO

N S

A R

E S

U B

JE

C

T T

O M

A N

U

FA

C T

U R

E R

S T

O

LE

R A

N C

E A

N D

C H

A N

G E

W

IT

H O

U T

N O

T

A

S S

U M

E N

O R

E S

P O

N S

IB

IL

IT

O

R U

S E

O F

S U

P E

R S

E D

E D

O R

V O

ID

D

AT

A

S

IZ

E

SUFFIX -AV

Specify Type, Size & Finish eg: AV05NB *Not available for 05" (125) size

FLAPPER TYPE BACKWATER VALVE

MATERIALS:

Chrome Plated -CP Polished Bronze -PB

FUNCTION: Provides backwater pro-tection at point where protection is needed.

VARIATIONS

B

H

B DIA 05 (125) 06 (150) 07 (180) 08 (205)

H 2 (51) 2 (51) 2 1/4 (57) 2 1/2 (64)

MIN 1 1/4 (32) 1 1/4 (32) 1 1/4 (32) 1 1/2 (38)

MAX 2 1/4 (57) 2 1/4 (57) 2 1/4 (57) 2 1/2 (64)

X

SUFFIX -D-E Specify Type, Size & Finish eg:

REINFORCED TRACTOR STRAINER

MATERIALS:

Cast Iron -CI Chrome Plated -CP Polished Bronze -PB

FUNCTION: Used in finished floors where medium weight wheeled loads are anticipated and loose set non-tilt tractor grate is desired.

VARIATIONS:

B

H

SUFFIX B H X

DIA MIN MAX

-D 07 (180) 3 1/4 (83) 2 5/8 (67) 3 1/2 (89) -E 09 (230) 3 1/2 (89) 2 3/4 (70) 3 1/2 (89)

REV. DATE DESCRIPTION BY CKD. BY

P J

T D

T D

5-

-8

N O

N E

P M

S H o f 2 G

6 (150)

3 1/8 (79)

6 (150) 7 1/2 (190)

5/32 (4)

2 (51)

NOTE: Dimensions shown in parenthesis are in millimeters.

SUFFIX -F

BSE 11-4-97 Added Nickel Bronze EMB

BS

CL

F 6-11-99 Revised Tables CMD E G 10-4-01 Revised Suffix-BS RN

8-24-99 Revised TBW

Nickel Bronze -NB

Nickel Bronze -NB

Nickel Bronze -NB

Nickel Bronze -NB

Nickel Bronze -NB Nickel Bronze -NB

Nickel Bronze -NB

Nickel Bronze -NB

Hinged Grate (Specify Suffix -AH) Vandal Proof Screws -U

Flapper Type Backwater Valve (Specify Suffix -DV or -EV) Sediment Bucket -B Vandal Proof Screws -U

D09PB

E09PB

Flapper Type Backwater Valve (Specify Suffix

-FV)

Holes in Flange -SH Sediment Bucket -B Vandal Proof Screws -U

JAY R.

SMITH MFG. CO.®

MEMBER OF ACORN’S FAMILY OF COMPANIES

POST OFFICE BOX 3237

MONTGOMERY, ALABAMA 36109-0237 (USA)

TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com

CUSTOMER

DRIVEN

SMITH®

MEMBER OF:

ASPE

SANITARY

N G IN E E RINGPrevention Rather Than Cure

FIGURE NUMBER

LOCATION

A

OPTIONAL STRAINER HEADS

Specify Type, Size & Finish eg: H05CP

B DIA 05 (125) 06 (150) 07 (180) 08 (205)

H 2 (51) 2 (51) 2 1/4 (57) 2 1/2 (64)

MIN 1 1/4 (32) 1 1/4 (32) 1 1/4 (32) 1 1/2 (38)

MAX 2 1/4 (57) 2 1/4 (57) 2 1/4 (57) 2 1/2 (64)

X

SUFFIX -H

SOLID HINGED COVER

FUNCTION: Used in areas where intermittent drain use is required. Solid cover prevents intrusion of chips, saw-dust, etc., which are swept up before cover is opened for washdown.

The secondary strainer prevents debris from entering the waste line.

H

B

SUFFIX -G

Specify Type, Size & Finish eg: G08PB

B DIA 05 (125) 06 (150) 08 (205)

H 2 (51) 2 (51) 2 1/2 (64)

MIN 1 1/4 (32) 1 1/4 (32) 1 1/2 (38)

MAX 2 1/4 (57) 2 1/4 (57) 2 1/2 (64)

LOW DOME STRAINER

MATERIALS:

Chrome Plated -CP Polished Bronze -PB

FUNCTION: Used in gutters and recessed areas where excessive debris build-up is expected.

Dome insures drainage even when partly covered.

H

B

Specify Type, Size & Finish eg: J06NBSUFFIX -J

FUNCTION: Solid gas tight, vandal proof, threaded cover for areas where intermittent drain use is required.

MATERIALS:

Chrome Plated -CP Polished Bronze -PB

SPANNER WRENCH COVER

X

MIN MAX

2 (51) 3 (76)

Specify Type, Size & Finish eg: K07CP

B SQ 05 (125) 06 (150) 07 (180) 08 (205)

H 2 (51) 2 (51) 2 1/4 (57) 2 1/2 (64)

MIN 1 1/4 (32) 1 1/4 (32) 1 1/4 (32) 1 1/2 (38)

MAX 2 1/4 (57) 2 1/4 (57) 2 1/4 (57) 2 1/2 (64)X

SUFFIX -K

FUNCTION: Used in finished floors where some light wheeled traffic is anticipated.

MATERIALS:

Chrome Plated -CP Polished Bronze -PB

REINFORCED SQUARE

STRAINER

H

B

ANGLE STRAINER

Specify Type, Size & Finish eg: VPB, WNB

SUFFIX

-V -W

MATERIALS:

Cast Iron -CI Chrome Plated -CP Polished Bronze -PB

FUNCTION: Shower room drain set at wall and floor junction. Vertical grate openings prevent drain stoppage should flat surface become covered.

VARIATIONS:

Vandal Proof Screws -U

D

C

2 1/2

B

SUFFIX B C D X

-V 3 1/2 (89) 3 1/2 (89) 4 1/2 (115) 1 5/8 (41) 2 5/8(67) -W 6 3/4 (170) 6 3/4 (170) 6 1/2 (165) 1 5/8 (41) 2 5/8(67)

Specify Type, Size & Finish eg: YCP, ZCPSUFFIX -Y-Z

FUNCTION: Used as overflow drain in decorative pools, fish ponds or similar areas.

Dome prevents floating objects from entering drain line.

VARIATIONS:

Less Dome -LD Standpipe Height other than 6" (150) (Specify Height)

MATERIALS:

Chrome Plated -CP Nickel Bronze -NB Polished Bronze -PB

OVERFLOW WITH STANDPIPE

A

4 1/2

SUFFIX A X

SIZE MIN MAX

-Y 2 (51) 3/4 (19) 2 1/8 (54)

-Z 3 (76) 3/4 (19) 2 1/8 (54)

2010 SERIES OPTIONAL

STRAINER HEADS

S E

R

IE

S O

P T

IO

N

A L

S T

R A

IN

E

R H

E A

D S

F

IG

U R

N U

M B

E R

D R

A W

N B

Y

C H

E C

K E

D B

Y

A P

P R

O V

E D

B Y

D

AT

E

S

C A

LE

D

R A

W

IN

G N

U M

B E

R

D

IM

E N

S

IO

N S

A R

E S

U B

JE

C

T T

O M

A N

U

FA

C T

U R

E R

S T

O

LE

R A

N C

E A

N D

C H

A N

G E

W

IT

H O

U T

N O

T

A

S S

U M

E N

O R

E S

P O

N S

IB

IL

IT

O

R U

S E

O F

S U

P E

R S

E D

E D

O R

V O

ID

D

AT

A

S

IZ

E

Specify Type,Size & Finish eg: LNB

RECTANGULAR STRAINER

MATERIALS:

Chrome Plated -CP Polished Bronze -PB

VARIATIONS:

Sediment Bucket -B Vandal Proof Screws -U

FUNCTION: Used in finished floors where light wheeled loads and or heavy foot traffic are anticipated.

SUFFIX L M N P R T

B x B' 4 1/2(115)x8(205) 4(100)x12(305) 5(125)x9(230) 5(125)x13(330)6(150)x10(255) 5(125)x17(430) H 2 1/4 (57) 2 1/2 (64) 2 1/4 (57) 3 (76) 2 1/4 (57) 3 (76)

MIN 1 3/8 (35) 1 7/8 (48) 1 3/8 (35) 2 1/8 (54) 1 3/8 (35) 2 1/4 (57)

MAX 2 3/8 (60) 2 3/4 (70) 2 3/8 (60) 3 (76) 2 3/8 (60) 3 1/8 (79)

X

H

B x B'

SUFFIX

-L-M-N-P-R-T

FUNCTION: Used in finished floors where light wheeled loads and or heavy foot traffic are anticipated.

MATERIALS:

Polished Bronze -PB Rough Bronze -RB

HEAVY DUTY ADJUSTABLE

2 3/16

SUFFIX -69SUFFIX -X

EXTENSION ADAPTOR

FUNCTION: Used when a strainer head must be raised to accommodate deeper floor fill.

REGULARLY

FURNISHED:

Duco Cast Iron -CI

MATERIALS:

Cast Bronze -CB Galvanized Cast Iron -G

NOTE: Extension can be stacked for increased maximum adjustment.

MIN 2 1/2

MAX 3 3/4

3 3/4 - 12

REV. DATE

E 11-4-97 Added Nickel Bronze EMB F 1-22-99 T Strainer was S Strainer TBW

DESCRIPTION BY CKD. BY

P J

T D

T D

5-

-8

N O

N E

P M

S H o f 2 H

8 1/4 x 3 1/4 Oval

(210) x (83)

4 1/2 (115)

5 x 2 1/2

(125) x (64)

4 (100) DIA

4 1/4 (110)

2 1/2 (64)

5 x 2 1/2

(125) x (64)

1 (25)

Fig. 3580

6 DIA (150)

4 1/4 (110)

2 1/2 (64)

Fig. 3581 Fig. 3590 Fig. 3591

MIN MAX

2 1/2 (64)

3 3/4 - 12 (95)

MIN 2 1/2 (64)

MAX 3 3/4 (95)

4 1/2 (115)

6 (150)

2 (51)

6 (150)

2 3/16 (56)

6 x 2 1/2 Oval

(150) x (64)

NOTE: Dimensions shown in parenthesis are in millimeters.

eg: A06NB-69

BS

BS

G 6-11-99 Revised Tables CMD H 8-24-99 Revised TBW

BS

BS

D 10-28-96 Chg'd Func of Suffix -V -W

Nickel Bronze -NB

Nickel Bronze -NB Nickel Bronze -NB

Nickel Bronze -NB

Nickel Bronze -NB

Nickel Bronze -NB

3(76)

6(150)

VARIATIONS:

Flapper Type Backwater Valve (Specify Suffix -GV) Sediment Bucket -B Vandal Proof Screws -U

VARIATIONS:

Flapper Type Back-water Valve(Specify Suffix -KV) Sediment Bucket -B Vandal Proof Screws -U

VARIATIONS:

Flapper Type Back-water Valve(Specify Suffix -69V) Sediment Bucket -B Vandal Proof Screws -U

VARIATIONS:

Flapper Type Backwater Valve (Specify Suffix -GV) Vandal Proof Screws -U

VARIATIONS:

Flapper Type Back-water Valve (Specify Suffix -JV) Holes in Flange -SH Sediment Bucket -B Vandal Proof Screws -U

MATERIALS:

Cast Iron -CI Chrome Plated -CP Polished Bronze

-PB

Nickel Bronze -NB

JAY R.

SMITH MFG. CO.®

MEMBER OF ACORN’S FAMILY OF COMPANIES

POST OFFICE BOX 3237

MONTGOMERY, ALABAMA 36109-0237 (USA)

TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com

CUSTOMER

DRIVEN

SMITH®

MEMBER OF:

ASPE

SANITARY

N G IN E E RINGPrevention Rather Than Cure

REV. DATE DESCRIPTION BY CKD. BY

WEIGHT

POUNDS

VOLUME

CUBIC FEET

FIGURE NUMBER

LOCATION

FI

G U

R E

N U

M

BE

R

D

IM

EN

SI

O N

S

AR

E

SU

BJ

EC

T

TO

M

AN

U

FA

C

TU

R

ER

S

TO

LE

R

AN

C

E

AN

D C

H

AN

G E

W

IT

H O

U T

N O

TI

C

E W

E C

AN

A

SS

U

M E

N O

R

ES

PO

N

SI

BI

LI

TY

F O

R U

SE

O

F

SU

PE

R

SE

D

ED

O

R V

O

ID

D

AT

A

D R

AW

N

B Y:

C H

EC

KE

D B

Y:

AP

PR

O

VE

D

B Y:

D

AT

E:

SC

AL

E:

SI

ZE A

D R

AW

IN

G N

U M

BE

R

10 (255) SQ

8 1/2 (215) SQ

3/8 (10)

2 (51) 6 (150)

3 (76)

A

10 (255) SQ

8 1/2 (215) SQ

3/8 (10)

2 (51)

(150)

3 (76)

A

SQUARE NICKEL BRONZE TOP

8 1/2" (215) TOP - MEDIUM RECEPTORS

-10 . . . . . . . . . . Less NB Rim and Grate -11 . . . . . . . . . . Less Grate w/NB Rim -12 . . . . . . . . . . With NB Rim and 1/2 Grate -13 . . . . . . . . . . With NB Rim and 3/4 Grate -14 . . . . . . . . . . With NB Rim and Grate with 2 1/2" (64) SQ Center Hole -15 . . . . . . . . . . With NB Rim and Aluminum Recessed Grate -19 . . . . . . . . . . With NB Rim and Hinged Grate -21 . . . . . . . . . . With NB Rim and Grate with 4" (100) DIA NB Funnel -22 . . . . . . . . . . With NB Rim and Grate with 6" (150) DIA NB Funnel -25 . . . . . . . . . . With NB Rim and Grate with 8 1/4(210) x 3 1/4(83) x 4 1/2"(115) High Oval NB Funnel -26 . . . . . . . . . . With NB Rim and Grate with 6(150) x 2 1/2(64) x 1"(25) High Oval NB Funnel -41 . . . . . . . . . . With NB Rim and Solid Cover -42 . . . . . . . . . . With NB Rim and 1/2 Solid Cover -43 . . . . . . . . . . With NB Rim and 3/4 Solid Cover -44 . . . . . . . . . . With NB Rim and Solid Cover with 2 1/2" (64) DIA Center Hole

FEATURES, OPTIONS & ORDERING INFORMATION

REGULARLY FURNISHED: Cast Iron Flanged Receptor with Seepage Holes, Acid Resistant Coated Interior, Nickel Bronze Rim and Secured Grate. Aluminum Dome Bottom Strainer or White ABS Sediment Bucket as Indicated by Figure Number.

SUFFIX NUMBER

SQUARE RIM DESCRIPTION

OPTIONAL MATERIALS:

All Duco Cast Iron Receptor -CI All Galvanized Receptor -G

Free Area

19.43 SQ IN

(125) SQ CM

WITH DOME BOTTOM STRAINER WITH SEDIMENT BUCKET

A (Pipe Size) = 02(50), 03(80) or 04(100)

Fig. 3100C .................................. CAULK OUTLET .................................... Fig. 3101C Fig. 3100Y ................................. NO-HUB OUTLET ................................... Fig. 3101Y

3100, 3101

, 3

PJ

JD

SJ

M 9-

-8

N

O N

E S3

H

VARIATIONS:

Aluminum Flat Bottom Strainer -FBS Flashing Clamp -C Less Flange (Specify Fig. 3105, 3106) Polished Aluminum Dome Bottom Strainer -PDBS Vandal Proof Screws -U L Speedi-Set Service Weight 02(50), 03(80) & 04"(100) sizes only LXH Speedi-Set Extra Heavy 02(50), 03(80) & 04"(100) sizes only

FUNCTION: Used in kitchens, hospitals, food markets, restaurants, schools and all types of food handling areas where the ultimate in sanitation is desirable and a medium capacity receptor is required.

NOTE: Dimensions shown in parentheses are in millimeters.

SANI-CEPTOR® ACID RESISTANT COATED

FLOOR & INDIRECT WASTE DRAINS

F 01/20/11 Updated Logo JJ TW G 6-10-14 Revised Reg. Furn., Var. TBW TWK H 8-4-14 Revised Variations TBW CL

JAY R.

SMITH MFG. CO.®

MEMBER OF MORRIS GROUP INTERNATIONAL™

POST OFFICE BOX 3237

MONTGOMERY, ALABAMA 36109-0237 (USA)

TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com

CUSTOMER

DRIVEN

SMITH®

MEMBER OF:

ASPE

SANITARY

E N G IN E E RINGPrevention Rather Than Cure

SINCE 1926

dyamashiro

FS-1

FEATURES:

One piece seamless Deep Drawn sink bowl design.

All sink bowls have a large liberal radii with a minimum dimension of 2” and are rectangular in design for increased capacity.

Self-Rim Design. Mounting clips provided accomodate all thicknesses of counter. (Quantity supplied varies based on drop in sink ordered).

Includes 4" O.C. K-50 faucet (DI-3-1612 includes K-53 faucet) & basket drain.

CONSTRUCTION:

Bowls fabricated from one sheet of stainless steel.

All bowls are Sound Deadened.

Units feature Advance Tabco’s Smart Finish™.

MECHANICAL:

Faucet supply is 1/2” IPS male thread.

Deck mounted faucets are furnished with aerator.

MATERIAL:

18 gauge type 304 series stainless steel.

Faucets are brass-nickel plated.

Stainless Steel 1-1/2" IPS basket drain.

Item #: Qty #:

Model #:

Project #:

NEW YORK GEORGIA TEXAS NEVADA

Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578www.advancetabco.com

Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.

Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933

STAINLESS STEEL

DROP-IN SINKS

Three Compartments - FOR GENERAL PURPOSE USE

A-5

DI-3-10

DI-3-1612

DI-3-1410

Sinks Includes Faucet & Drain

K-50 K-53 K-55 K-58 K-28

Model # Qty Deck Mounted 8" Swing Spout. 4" O.C.

Deck Mounted 12" Swing Spout. 4" O.C.

Deck Mounted 8 1/2" Large Gooseneck. 4" O.C.

Deck Mounted Swing w/Spray. 8" O.C.*

Mounting Clips (Bag of 4).

Available Faucets & Accessories

*REQUIRES K-472 FAUCET HOLE REVISION

For Replacement Faucets & Upgrades, Drains & Accessories visit our website at www.advancetabco.com

Standard Faucet conforms to NSF 61 Standard 9.

Faucets Are AB1953 Lead Free Compliant.

NOTE: Multi-Compartment Drop-In Sinks ARE NSF Approved when used in Mobile Food Carts and Kiosks only.

STANDARD MOUNTING CLIPS

For countertops over 7/8” and up to 2” thick.

Replacement # K-28 (Per Sink) dyamashiro Text Box S-1 dyamashiro Highlight dyamashiro Highlight dyamashiro Highlight

TOL ± .125” Supplied with Two K-50 Faucets & K-6 Basket Drain ALL DIMENSIONS ARE TYPICAL

200 Heartland Boulevard, Edgewood, NY 11717-8380

ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice.

© ADVANCE TABCO, SEPTEMBER 2013

DIMENSIONS and SPECIFICATIONS

A-5a

DI-3-10

DI-3-1410

DI-3-1612

Approx. Wt. 40 lbs.

Approx. Wt. 50 lbs.

Approx. Wt. 60 lbs.

Cut-Out Size 37 1/4” x 18 1/4” 1 1/4” radius corners

Cut-Out Size 49 1/4” x 20 1/4” 1 1/4” radius corners

Cut-Out Size 55 1/4” x 24 1/4” 1 1/4” radius corners

TYPICAL INSTALLATION

OVERALL DIMENSION

(O.D)

CUTOUT DIMENSION

(O.D -3/4")

Cut-Out Size = L to R x F to B

Standard Mounting Clips Fit Countertops Over 7/8” & Up To 2” Thick.

www.advancetabco.com

For Orders & Customer Service:

Email: customer@advancetabco.com or Fax: 631-242-6900

For Smart Fabrication™ Quotes:

Email: smartfab@advancetabco.com or Fax: 631-586-2933

Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.

FEATURES:

One piece seamless Deep Drawn sink bowl design.

All sink bowls have a large liberal radii with a minimum dimension of 2” and are rectangular in design for increased capacity.

Self-Rim Design. Mounting clips provided accommodates all thicknesses of counter. (Quantity supplied varies based on drop in sink ordered).

Includes 4” O.C. K-52 faucet.

Includes 3” Drain Basket Drain*.

*DI-1-25 Includes 2” Drain with Strainer Plate.

CONSTRUCTION:

Unit fabricated from one sheet of stainless steel.

All bowls are Sound Deadened.

Units feature Advance Tabco’s Smart Finish™.

MECHANICAL:

Faucet supply is 1/2” IPS male thread.

Deck mounted faucet is furnished with aerator and 4” O.C.

MATERIAL:

20 gauge type 304 series stainless steel.

Faucets are brass-nickel plated.

Drains are 1-1/2” IPS.

Item #: Qty #:

Model #:

Project #:

A-1

STAINLESS STEEL

DROP-IN SINKS

One Compartment - FOR HAND SINK USE

DI-1-10

DI-1-35

DI-1-5SP

DI-1-10SP

DI-1-5

Sinks Includes Gooseneck Faucet & Drain

New 6” Rear & Side

Splash

K-52 K-55 K-58 K-62 K-28

Model # Qty Deck Mounted 3 1/2” Gooseneck. 4” O.C.

Deck Mounted 8 1/2” Gooseneck. 4” O.C.

Deck Mounted Swing w/Spray. 8” O.C.*

Deck Mtd. X.H.D. 3 1/2” Gooseneck. 4” O.C.

Mounting Clips (Bag of 4).

Available Faucets & Accessories

*REQUIRES K-472 FAUCET HOLE REVISION

For Replacement Faucets & Upgrades, Drains & Accessories visit our website at www.advancetabco.com

Standard Faucet conforms to NSF 61 Standard 9.

Faucets Are AB1953 Lead Free Compliant.

DI-1-25

STANDARD MOUNTING CLIPS

For countertops over 7/8” and up to 2” thick.

Replacement # K-28 (Per Sink) dyamashiro Text Box S-2 dyamashiro Highlight dyamashiro Highlight dyamashiro Highlight

A-1a

DIMENSIONS and SPECIFICATIONS TOL ± .125” Supplied with K-52 Faucet ALL DIMENSIONS ARE TYPICAL

200 Heartland Boulevard, Edgewood, NY 11717-8380

13"

19" 14" 10"

10"

6"

5"

6"

2 "

CL

ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice.

© ADVANCE TABCO, FEBRUARY 2015

DI-1-5

DI-1-5SP

13"

19" 14" 10"

10"

6"

10"

6"

2 "

CL

13"

19" 14" 10"

10"

6"

5"

6"

2 "

CL

DI-1-10SP

DI-1-10

TOP VIEW FOR

DI-1-5 & DI-1-10

TOP VIEW FOR

DI-1-5SP & DI-1-10SP

Approx. Wt. 8 lbs.

Approx. Wt. 10 lbs.

DI-1-25

DI-1-35

Approx. Wt. 14 lbs.

Approx. Wt. 12 lbs.

Approx. Wt. 16 lbs.

Approx. Wt. 18 lbs.

Cut-Out Size 12 1/4” x 18 1/4” 1 1/4” radius corners

Cut-Out Size 11 1/4” x 13 1/4” 1 1/4” radius corners

Cut-Out Size 16 1/4” x 14 1/4” 1 1/4” radius corners

TYPICAL INSTALLATION

Cut-Out Size = L to R x F to B

OVERALL DIMENSION (O.D)

CUTOUT DIMENSION

(O.D -3/4")

Standard Mounting Clips Fit Countertops Over 7/8” & Up To 2” Thick.

NOTE: Use of Expanded Junction Box will expand the depth to 6.67" and Emergency Backup will expand the depth to 6.30". Use of 347V will increase fixture height by 1.4"

4.75" (121mm)

23.7" (602mm)

47.7" (1212mm)

T (800) 236-6800 F (262) 504-5415US: www.cree.com/lighting T (800) 473-1234 F (800) 890-7507Canada: www.cree.com/canada

*40L 100 LPW 10V types only - other types require addition of a 347 accessory kit

Rev. Date: 07/14/2014

CR24™

2' x 4' Architectural LED Troffer

Product Description The CR24™ Architectural LED High Efficiency (HE) troffer delivers up to 130 lumens per watt of exceptional 90 CRI light at 4000 lumens. This breakthrough performance is achieved by combining the high efficacy and high-quality light of Cree TrueWhite® Technology with a unique thermal management design. The CR24 (HD) option delivers enhanced spectrum 80+ CRI color quality. The CR24 product family is available in warm, neutral, cool, or daylight color temperatures and has step, 0-10V, or Lutron EcoSystem® Enabled dimming options. Its compact, lightweight design makes the CR24 perfect for use in commercial new construction or renovated spaces.

Performance Summary

Utilizes Cree TrueWhite® Technology (90 CRI) or available in 80+ CRI

Active Color Management

Room-Side Heat Sink

Assembled in the US & Mexico

Efficacy: 90-130 LPW

Delivered Light Output: 2200, 3100, 4000, 5000 lumens

Input Power: 22-50 watts

CRI: 90 CRI (Cree TrueWhite® Technology), 80+ CRI

CCT: 3000K, 3500K, 4000K, 5000K

Input Voltage: 120-277 VAC or 347 VAC*

Limited Warranty†: 10 years

Lifetime: Designed to last from 50,000 hours (HD), 75,000 hours (Standard TW), and 100,000 hours (HE TW)

Controls: Step Level to 50%, 0-10V Dimming or Lutron EcoSystem Enabled to 5%1

Mounting: Recessed

Ordering Information Example: CR22-20L-35K-S

CR24

Product Lumen Output Color Temp Voltage Control Options

CR24 22L

22W 2200 lumens – 100 LPW 31L 34W 3100 lumens – 90 LPW 40L 40W 4000 lumens – 100 LPW

40L HE

30.5W 4000 lumens – 130 LPW (30K) 32W 4000 lumens – 125 LPW (35K) 33W 4000 lumens – 120 LPW (40K) 34.5W 4000 lumens – 115 LPW (50K) 50L 50W 5000 lumens – 100 LPW

30K 3000 Kelvin 35K 3500 Kelvin 40K 4000 Kelvin 50K 5000 Kelvin

Blank 120-277 Volt (Standard) 347 Volt (Optional)

S Step Dimming to 50% 10V 0-10V Dimming to 5%

LES

Lutron EcoSystem® Enabled to 5%

HD7

CRI 80+

(44W 4000 lumens - 90 LPW)

EB142,4

Emergency Backup - 1400 lumens

EB14 SMK2,3,5

Emergency Backup with surface mount kit - 1400 lumens

1. Reference www.cree.com/lighting for recommended dimming control options. 2. Not available in 50L. Not available in LES types except 40L LES type. 3. Not available with EB14 option. Use EB14 SMK. 4. EB14 not for use with SMK Kits 5. Includes surface mount kit accessory (SMK-CR24). 6. 347V integrated option only available on 40L 100 LPW 10V fixtures. Wattage increases to 42W and fixture height increases by 1.4" over standard 120-277V fixtures. 7. HD only available in 40L.

†See www.cree.com/lighting/products/warranty for warranty terms.

Housings & Accessories

Accessories

CPLCR

Chicago Plenum Field Kit

CPLCR-EM

Chicago Plenum Field Kit-Emergency

CR-347V

347 Volt

CR-347V-SD

Step Dimming to 50%

SMK-24

Surface Mount Kit

PW-18/4-06-9T/SS-CR

Power Whip

AC5-18/4-72-PD8-JB

Adjustable Cable

AC5-72-PD8-JB

Adjustable Cable

EJBCR-5PK

Expanded size junction box for through wiring (5 pack)

For full list of Cree Quick Ship products visit www.cree.com/lighting/quickship

Zonal Lumen Summary

Zone Lumens % Lamp Luminaire

0-30 1,115 27.9% 27.9%

0-40 1,835 45.9% 45.9%

0-60 3,245 81.1% 81.1%

0-90 4,000 100% 100%

0 15 30

0° 90°

Average Luminance Table (cd/m2)

Horizontal Angle

Ve rti ca l A ng le

0° 45° 90°

0° 2174 2174 2174

45° 1976 2116 2152

55° 1807 2018 2074

65° 1553 1889 1879

75° 1149 1501 1119

85° 424 62 62 Reference www.cree.com/lighting for detailedphotometric data

Coefficients Of Utilization

RCC %: 80

RW %: 70 50 30 0

RCR: 0 119 119 119 119

1 109 105 101 97

2 100 92 85 79

3 91 80 72 66

4 83 71 63 56

5 76 64 55 48

6 71 57 48 42

7 65 52 43 37

8 61 47 39 33

9 57 43 35 30

10 53 40 32 27

Effective Floor Cavity Reflectance: 20%

Application Reference

Open Space

Spacing Lumens Wattage LPW w/ft2 Average fc

8 x 8

2200L 22W 100 0.35 30

4000L 40W 100 0.69 54

4000L 30.5W 130 0.56 54

5000L 50W 100 0.78 68

8 x 10

2200L 22W 100 0.28 25

4000L 40W 100 0.55 45

4000L 30.5W 130 0.45 45

5000L 50W 100 0.62 57

10 x 10

2200L 22W 100 0.22 21

4000L 40W 100 0.44 38

4000L 30.5W 130 0.36 38

5000L 50W 100 0.50 48

10 x 12

2200L 22W 100 0.19 17

4000L 40W 100 0.37 30

4000L 30.5W 130 0.30 30

5000L 50W 100 0.42 38

9' ceiling: 80/50/20 reflectances; 2.5' workplane, open room. LLF: 1.0 Initial Open Space: 50' x 40' x 10'

Product Specifications

CREE TRUEWHITE® TECHNOLOGY OPTION

A revolutionary way to generate high-quality white light, Cree TrueWhite® Technology is a patented approach that delivers an exclusive combination of 90+ CRI, beautiful light characteristics, and lifelong color consistency, all while maintaining high luminous efficacy -a true no compromise solution.

CREE LED TECHNOLOGY

Cree’s total systems approach to product development is a comprehensive engineering philosophy that combines the most advanced LED sources, driver technologies, optics and forms. The result is highly-reliable luminaire solutions for both indoor and outdoor applications that reduce energy use, extend lifetimes, and maximize illumination performance and quality.

ROOM-SIDE HEAT SINK

An innovative thermal management system designed to maximize cooling effectiveness by integrating a unique room-side heat sink into the diffusing lens. This breakthrough design creates a pleasing architectural aesthetic while conducting heat away from LEDs in a temperature-controlled environment. This enables the LEDs to consistently run cooler, providing significant boosts to lifetime, efficacy, and color consistency.

LUMEN MAINTENANCE FACTORS

• Reference www.cree.com/lighting for detailed lumen maintenance factors

CONSTRUCTION & MATERIALS

• Durable 20-gauge steel housing with standard troffer access plate for electrical installation

• Field replaceable light engine integrates LEDs, driver, power supply, thermal management, and optical mixing components

• One-piece lower reflector finished with a textured high reflectance white polyester powder coating creates a comfortable visual transition from the lens to the ceiling plane

• Provided t-bar clips and holes for mounting support wires enable recessed or suspended installation

• Individual fixtures may be mounted end to end for a continuous row of illumination NOTE: Reference www.cree.com/lighting for detailed instructions on field replacement of the light engine

OPTICAL SYSTEM

• Unique combination of reflective and refractive optical components achieves a uniform, comfortable appearance while eliminating pixelation and color fringing

• Components work together to optimize distribution, balancing the delivery of high illuminance levels on horizontal surfaces with an ideal amount of light on walls and vertical surfaces. This increases the perception of spaciousness

• Diffusing lens integrated with upward-facing LED strip eliminates direct view of LEDs while lower reflector balances brightness of lens with the ceiling to create a low-glare high angle appearance

ELECTRICAL SYSTEM

• Integral, high-efficiency driver and power supply

• Power Factor: = 0.9 nominal

• Input Power: Stays constant over life

• Input Voltage: 120-277V, 347V- 50/60Hz

• Battery Backup: Consult factory

• Temperature Rating: Designed to operate in temperatures 0-35˚C and below room side and plenum side

• Total Harmonic Distortion: < 20%

CONTROLS

• Step dimming to 50% comes standard*

• Optional continuous dimming to 5% with 0-10V DC control protocol*

• Optional Lutron EcoSystem® Enabled option allows seamless integration with

Lutron EcoSystem controls*

REGULATORY & VOLUNTARY QUALIFICATIONS

• UL924 (EB14 option)

• cULus Listed

• DLC qualified**

• Suitable for damp locations

• Designed for Indoor use

*Reference www.cree.com/lighting for recommended dimming controls and wiring diagrams.

**Please refer to DLC QPL list for most current information.

Photometry CR24-400L based on LTL Report test #: 24421 Fixture photometry has been conducted by a NVLAP accredited testing laboratory in accordance with IESNA LM-79-08. IESNA LM-79-08 specifies the entire luminaire as the source resulting in a fixture efficiency of 100%

© 2014 Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. Content is subject to change. See www.cree.com/patents for patents that cover these products. Cree®, the Cree logo, TrueWhite®, Cree TrueWhite®, and the Cree TrueWhite Technology logo are registered trademarks, and CR24™ and the Quick Ship logo are trademarks of Cree, Inc. The UL logo is a registered trademark of UL LLC. Lutron®, Lutron EcoSystem®, EcoSystem®, and the Lutron EcoSystem Enabled logo are registered trademarks of Lutron, Inc.

T (800) 236-6800 F (262) 504-5415US: www.cree.com/lighting T (800) 473-1234 F (800) 890-7507Canada: www.cree.com/canada

CR24TM

www.cree.com/lighting www.cree.com/lighting www.cree.com/lighting www.cree.com/lighting

DESCRIPTION

Murano glass with frosted or case glass interior. Includes low-voltage, 50 watt halogen bi-pin lamp or 6 watt replaceable LED module and six feet of field-cuttable suspension cable.

INSTALLATION

Socket terminates with FreeJack male connector, which may be installed into a system connector. Elements ordered with a system prefix include a connector for that system. For use on T~TRAK, order FreeJack version and T~TRAK FreeJack Connector (sold separately).

ACCESSORIES & OPTICAL CONTROLS

Swag Hook

WEIGHT

2lb / 0.91kg ± chartreuse amber chartreuse cobalt red white

COLOR OPTIONS

ORDERING INFORMATION

700 SYSTEM FIRF COLOR FINISH LAMP

FJ FREEJACK

KL KABLE LITE

MP MONOPOINT

MO MONORAIL

MO2 TWO-CIRCUIT MONORAIL

A AMBER

H CHARTREUSE

B COBALT

R RED

W WHITE

Z ANTIQUE BRONZE

C CHROME

S SATIN NICKEL

12 VOLT HALOGEN

-LED 12 VOLT LED 3000K

-24 24 VOLT HALOGEN

Note: Note: MP includes 4" Round Flush Canopy.

Antique Bronze is not available for Kable Lite.

When installing LED option on MO2 only magnetic transformers may be used.

7400 Linder Avenue Skokie, Illinois 60077

Tech Lighting, L.L.C.

T 847.410.4400 F 847.410.4500

700 FJ FIRF A S -LED

FIXTURE TYPE:

JOB NAME: B500 Canteen

NOTES:

©2014 Tech Lighting, L.L.C. All Rights Reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C.

Tech Lighting reserves the right to change specifications for product improvements without notification.

L O W - V O L T A G E P E N D A N T S

Firefrost Pendant

Firefrost Pendant | Customizable Spec Sheet http://www.techlighting.com/Products/SpecSheet/28

1 of 1 7/28/2014 2:23 PM

Commercial Exit Signs

45V Line Architectural LED Edge-Lit codes and standards

• UL listed to Standard 924

• NFPA 101 (Life SafetyCode)

• NEC 70 (National Electric Code) and OSHA Standards

• California Energy Commission construction

• Universal mount recessed back box is constructed

available.

• 6" letters with 3/4" stroke.

• Special Wording available on panel face.

installation

• The recessed back box (rough-in-section) requires a 14-5/8" x 2-5/8" cut out.

• Includes hanger bars for easy mounting.

installation.

electronics

• Standard emergency electronics provide a state-of-the art self-test/self-diagnostic circuitry.

indicators.

• Power Consumption

• AC Only: (single or double)

Red = 2.9 Watts, Green = 3.5 Watts

• Emergency Only: (single or double)

Red = 2.9 Watts, Green =3.5 Watts

LED

• The 45VL and ER45VXL exits utilize high lumen

battery

• Maintenance free, sealed nickel cadmium battery.

• Provides a minimum of 90 minutes of emergency illumination.

warranty

• Five year warranty on unit.

Project

Type

Model No.

Comments

Specifier’s Reference

Green Product Choice: 45VL1RCAL

CE-10050

rev. 9, 6/29/2012

Footnotes

specified.

option.

Double Face

signs)

Blank – Ceiling W – Wall3

E – End

Item Type

Family

No. of Faces

Housing Finish Directional IndicatorMounting2

Letter/Panel Color Options

45VL – LED (AC

Only)10

2 – Double Face

RC – Red on Clear3

RW – Red on White RM – Red on Mirror4

GC – Green on Clear3

2C – 2 Circuit Input5,6

FI – Fire Alarm Flashing Interface6,7

F – Flasher12

DC – DC External Backup

(6-12VDC)14

P31 Square Aluminum

P31B Square Black

Back Boxes6,8,9 (When rough-in section ordered separately) Unit Catalog Number Description

* Textured FinishCHEVRON DIRECTION LEGEND

Indicator Panel Front Panel Back

AL

AR

AD (single face)

LR

AD (double face)

<EXIT> <EXIT>

<EXIT

<EXIT>

EXIT>

<EXIT

EXIT>

<EXIT>

CE-10050 rev. 9, 06/29/2012 44V Line Architectural LED Edge-Lit

Dimensions

Recessed Ceiling

45V Line Recessed Ceiling

12"3/4"

7-7/8"

4"

2-1/2" 15-9/16"

14-1/2"

3-3/4"

45V Line Recessed End

12-1/4"

12-1/4"

15"

14-1/2"

3-3/4" 4"

1-5/8"

1-3/16"

3/4"

15-9/16"

9-3/4"

12"

8"

3/4"

3-3/4" 1-5/8"

2-1/3" 4"

11-1/2"

8"

1-5/8"

4-17/32"

4-17/32"

10-7/8"

12"

12-1/8"

3" 12"

12-5/8"11-3/4"

4-17/32" 3"

1-5/8"

23-3/4"

12-1/8"

12"

12"

8"

4-17/32" 3"

7/8"

Recessed Wall Recessed End

Surface Ceiling Surface Wall Surface Pendant

Xtest

• Full open circuit testing every hour.

Testing Specifications Automatic Test:

Manual Test:

45LRRK – Red Retrofit Kit 45LGRK – Green Retrofit Kit

Kitchen Ventilation Systems

• Exhaust Hoods & Grease Extraction

• Fire Suppression Systems

• Accessories

January

Model Application Pages

Grease Hoods — Type I

Type I kitchen hoods are used over cooking equipment producing grease-laden effluent.

5-12

Heat & Condensate Hoods — Type II

Type II kitchen hoods are designed to capture heat and/or condensate from non-grease producing appliances such as ovens and dishwashers.

13-16

Grease Extraction

Greenheck offers industry-leading grease extraction filters to match your cooking application.

17-25

External Supply Plenums

Greenheck has a variety of solutions available to properly introduce air into the space when exhaust-only hoods are being used.

26-28

Fire Suppression Systems The first line of defense against fire in a commercial kitchen is the hood fire protection system. Greenheck has a variety of factory pre-piped fire protection systems available from the two leading manufacturers, Amerex® and Ansul®.

29-31

Greenheck’s comprehensive line of kitchen ventilation products are designed to meet the varying needs of food service establishments. Whether you are working on a school cafeteria, restaurant, industrial cooking process, or otherwise, Greenheck has the products and resources to meet your ventilation requirements.

Additionally, Greenheck offers exhaust fans, make-up air units and more to create a complete, quality kitchen ventilation system.

To learn about our controls, utility distribution systems and other products, see the kitchen ventilation catalogs identified on the back cover and visit www.greenheck.com.

Table of Contents

1. Will you be exhausting grease-laden air or non-grease-laden air?

• Type I Hoods: Used if you are exhausting grease-laden air.

• Type II Hoods: Used if you are exhausting non-grease-laden air (heat/condensate).

2-Step Decision Guide

2. Type I Hoods: What hood style do I need?

Is your cooking equipment against a wall?

• Wall canopy hoods:

Most common when the cooking battery is against a wall.

• Proximity (backshelf) hoods:

Used when you have a low ceiling and/or it is to be placed over light to medium duty cooking equipment such as ranges, griddles and fryers.

These hoods are typically used in quick service restaurants.

Is your cooking equipment located in the open (example, island)?

• Single-island hoods:

Used when the cooking battery is in one row, not against a wall.

• Double-island hoods:

Used when the cooking battery is in two back-to-back rows, not against a wall.

Type II Hoods: What hood style do I need?

• Heat and fume:

Heat-only hoods are typically used for oven applications.

• Condensate:

Condensate hoods are typically used above dishwashers.

Single-Island Hood

Double-Island Hood

Heat and Fume

Wall Canopy Hood

Proximity (Backshelf)

Hood

Condensate

2-Step Decision Guide

C d t

Greenheck Type I hoods are UL 710 Listed.

®NSF

Grease Hoods — Type I

GH - E - W

GG H2O

Filter

GH - Baffle Filter

GX - Grease-X-Tractor™

GG - Grease Grabber™

GK - High Velocity Cartridge Filter

GW - Water Wash

PH - Pizza (PHEV) Only

Filter

GG - Grease Grabber

Model Number Code

Make-Up Air Style

E - Exhaust Only

D - Exhaust Only - Double-Wall Front

F - Face Supply

C - Face and Air Curtain Supply

Configuration

W - Wall Style Canopy

V - Single-Island Style (V-Bank) Canopy

P - Proximity (Backshelf)

H2O - Auto-Cleaning

Type I hoods are designed for use above grease-producing equipment and are available in several styles and configurations.

Greenheck grease hoods offer the following benefits:

• Standard construction is a minimum of 18 gauge 430 stainless steel

• Hoods can be built in single section lengths from 3-16 feet (914-4,876 mm)

• Flexible lengths, widths and heights

Hood lengths: Available in 1-inch (25 mm) increments

Hood widths: Available in 3-inch (76 mm) increments

Hood heights: Available in 24-inch (609 mm), 30-inch (762 mm) or tapered configurations

• Longer hoods are available in multiple sections and can be made to appear as one hood by utilizing our continuous capture option to improve performance and aesthetics

• Standing seam construction for superior strength

• Excellent dimensional tolerances due to highly tooled manufacturing

• UL 710 Listed and bears the National Sanitation Foundation (NSF) Seal of Approval (Standard 2)

• Rated for 400°F (76°C), 600°F (316°C), and 700°F (371°C) cooking operations

• Performance Enhancing Lip (PEL) is standard and improves capture efficiency by turning air back into the hood

Type I Overview

Greenheck’s wall canopy hoods are used over cooking equipment that produce heat and grease-laden effluent. Wall canopy hoods are intended to be used when the cooking equipment is placed against a wall. A wide variety of sizing and hood options, along with several accessories, make Greenheck the right choice to meet your range of design requirements.

Exhaust Only

• Supply air is introduced through ceiling diffusers or external supply plenums (shown on page 26-28)

• More dimensional flexibility than other manufacturers

Single-Wall Front

Double-Shell Front (Optional)

- One-inch of insulation between stainless steel panels provides additional strength and rigidity

Wall Canopy Hoods

Face and Air Curtain Supply

•…