36C25818B0305-0003003.pdf

Product Specifications Lengths include end panelsCombination Convertible Service Above Refrigerated

Self-Service Case

Features Standard Options

EXTERIOR COLOR

INTERIOR COLOR

REAR EXTERIOR COLOR

TRIM COLOR

BASE

LOWER REAR

UPPER REAR

ELECTRICAL CONNECT

REFRIGERATION

MISCELLANEOUS

ACCESSORIES

888 E. Porter Rd.

Muskegon, MI 49441 Ph. 231-798-8888 Fx. 231-798-4960 www.structuralconcepts.com

Note: Information is subject to change at any time.

Visit www.structuralconcepts.com for the most current specs.

MariaJ Typewritten Text

Stephanie Line

Stephanie Line

Product Specifications

Intended Environment:

Integrated Prod Temp ° F Intended Product To Be Displayed Zone

Model Technical Specifications

Model L1" L2" WattsFreqPhsSystem Circuit Volts Wires BTUH Frt ClsNEMA Plug

Ship Wt

Amps

*** SSTL"

Regulatory Approvals:

Important Notes:

888 E. Porter Rd.

Muskegon, MI 49441 Ph. 231-798-8888 Fx. 231-798-4960 www.structuralconcepts.com

Note: Information is subject to change at any time.

Visit www.structuralconcepts.com for the most current specs.

ITEM NO. ______________________________________________________

PROJECT ______________________________________________________

LOCATION _____________________________________________________

DATE _________________________ QTY. ___________________________

908 Highway 15 North • New Albany, MS 38652 PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com

FEATURES

CONSTRUCTION

• Seamless stainless steel top

• 24 gauge painted textured galvanized steel cabinet

• Galvanized steel interior

• Equipped with leveling legs to correct for unlevel flooring situations

• Floor drain with garden hose fitting

• Galvanized steel inner liner with cold wall evaporator

• Anti-condensate heaters under stainless top cap

• 21/4" foamed-in-place “zero ODP” urethane insulation

LIDS

• Stainless steel

• Hinged with handles

• Gasket

REFRIGERATION

• Refrigerant:

DC-12D ..........................R-404A

All other models ............ R-134a

• Self-contained, factory tested refrigeration system

• Force draft hermetic condensing unit (semi-hermetic unit on DC- 12D with wire and tube con-denser for low maintenance)

• Minimum 4" clearance required between cabinet back and wall

• Temperature range:

10° to -10°F (-12° to -23°C)

• R-factor (insulation efficiency rating): 19.40

WARRANTY

• Standard limited two year parts and labor

• Additional three year coverage on compressor part

FEATURES

DC-2S

DC SERIES

Conventional Ice Cream Storage/Dipping Cabinets

OPTIONS

❑ Add suffix “SE” for all-stainless exterior

❑ Custom colors ❑ Lid locks ❑ Legs ❑ Casters ❑ Additional lids ❑ Load level shelves ❑ Dipper well

MODELS

❑ DC-2S ❑ DC-8D

❑ DC-4S ❑ DC-10D

❑ DC-4D ❑ DC-12D

❑ DC-6D

C-UL listing for all models except

DC-12D.

DC-8D

Standard white

Black also available

STANDARD TEXTURED EXTERIOR

vhavcsboxdoj Typewritten Text 1A

Highlight

NOTE: Cabinet designed for optimum performance in air-conditioned area at 75°F ambient and 55% relative humidity.

All specifications subject to change without notice.

908 Highway 15 North • New Albany, MS 38652 PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com

DC SERIES

CONVENTIONAL ICE CREAM STORAGE/DIPPING CABINETS

TECHNICAL SPECIFICATIONS

LISTINGS HOOKUP

BID SPECIFICATIONS

Item no. DC-_______________ Provide_____________( ) Conventional Ice Cream Storage/Dipping Cabinet(s), Master-Bilt® model DC-________.

Cabinet will feature textured finish on exterior with galvanized steel interior.

Cabinet to have flip lids, seamless stainless steel top, 24 gauge steel walls, galvanized steel inner liner with cold wall evapora-

287-10/16-web ©2016 Master-Bilt Products, an unincorporated division of Standex International Corporation. All rights reserved. Printed in U.S.A.

Via plug in, 9 foot long, flexible 3 wire 14/3 cord with molded plug. Ten amp 115V service is recommended.

PLAN VIEW SIDE VIEW ELEVATION VIEW

tor, anti-condensate heaters under stain-less steel top, 21/4" foamed-in-place “zero ODP” urethane insulation and baked-on polyester enamel finish. Standard leveling legs provided to correct for unlevel flooring situations.

The refrigeration system will be self-contained. DC-12D will contain R-404A re-frigerant and all other models will contain

R-134a. The temperature range will be 10° to -10°F (-12° to -23°C).

Cabinet to have standard limited two year parts and labor with additional three year coverage on compressor part.

Cabinet to be UL, C-UL (on all except DC-12D) and NSF listed.

NEMA 5-15P

MODEL

DIMENSIONS

(in.)

DIMENSIONS

(mm)

VOLTS AMPS

UNIT

H.P.

CAN CAP.

DISPLAY/

STORAGE*

CAP.

CU. FT.

SHIP

CU. FT.

SHIP

WT.

LB/KGL D H L D H

DC-2S 317/8 211/8 341/8 810 537 867 115 5.7 1/4 3/1 5.2 19.0 220/100

DC-4S 54 211/8 341/8 1372 537 867 115 5.7 1/4 6/4 11.0 36.0 280/127

DC-4D 305/8 301/8 341/8 778 765 867 115 5.7 1/4 5/2 7.6 27.0 220/100

DC-6D 43 301/8 341/8 1092 765 867 115 5.7 1/4 8/5 12.5 39.0 275/125

DC-8D 54 301/8 341/8 1372 765 867 115 7.3 1/3 11/8 17.3 47.0 365/164

DC-10D 665/8 301/8 341/8 1692 765 867 115 7.3 1/3 14/11 22.0 59.0 430/195

DC-12D 845/8 301/8 341/8 2149 765 867 115 7.5 1/3** 18/15 29.1 71.0 490/223

*Capacity in 3 gal. cans **Semi-hermetic compressor

C-UL listing for all models except DC-12D.

Highlight

Specifications subject to change without notice.

Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).

Rough-In Data

2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl Fax# (001)636-272-7546 Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com

Model:

TRUE FOOD SERVICE

EQUIPMENT, INC.

Project Name:

Location:

Item #: Qty:

Model #:

AIA #

SIS #

Printed in U.S.A.

ApprovAls: AvAilAble At:

ADA & Low Profile Comparison

Standard ADA Low Profile 36" height 34" height 317/8" height (915 mm) (864 mm) (810 mm)

11/2” diameter dual swivel castors for “LP” models.

TUC-60-LP

Undercounter:

Low Profile Solid Door Refrigerator

TUC-60-LP

Designed using the highest � quality materials and components to provide the user with colder product temperatures, lower utility costs, exceptional food safety and the best value in today’s food service marketplace.

"Low Profile" models are � designed to slide easily under custom built countertops.

1 � 1/2" (39 mm) diameter dual swivel castors. 31 7/8" (810 mm) work surface height.

Oversized, factory balanced, � refrigeration system holds 33°F to 38°F (.5°C to 3.3°C).

All stainless steel front, top � and cabinet ends. Matching aluminum finished back.

Attractive, NSF approved, white � aluminum interior liner with stainless steel floor.

Self closing door(s). Positive � seal, torsion type closure system.

Foamed-in-place using � Ecomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

Model Doors Shelves

Cabinet Dimensions (inches)

(mm) Counter Height HP Voltage Amps

NEMA

Config.

Cord Length

(total ft.)

(total m)

Crated Weight

(lbs.)

(kg)L D† H*

TUC-60-LP 2 4 603/8 301/8 293/4 317/8 1/5 115/60/1 6.5 5-15P 7 340

1534 766 756 1/3 230-240/50/1 5.6 ▲ 2.13 155

† Depth does not include 1" (26 mm) for rear bumpers.

* Height does not include 21/8" (54 mm) for castors.

▲Plug type varies by country.

TRUE REFRIGERATION

MADE IN

SINCE 1945

U.S.A.

9/11 vhavcsboxdoj Typewritten Text

StanDaRD FeatuReS

Model:

TRUE FOOD SERVICE EQUIPMENT

2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com

METRIC DIMENSIONS ROUNDED UP TO THE

NEAREST WHOLE MILLIMETER

SPECIFICATIONS SUBJECT TO CHANGE

WITHOUT NOTICE

Plan VIew

KCL

TUC-60-LP

DESIGN

True’s undercounter’s are designed with • enduring quality and value that protects your long term investment. Our commitment to using the highest quality materials and oversized refrigeration ensures exceptional food preservation.

“Low Profile” models are designed to slide • easily under custom built countertops.

REFRIGERATION SYSTEM

Factory engineered, self-contained, capillary • tube system using enviromentally friendly (CFC free) 134A refrigerant.

Oversized, factory balanced refrigeration • system with guided airflow to provide uniform product temperatures.

Extra large evaporator coil balanced with • higher horsepower compressor and large condenser maintains cabinet temperatures of 33°F to 38°F (.5°C to 3.3°C) for the best in food preservation.

Sealed, cast iron, self-lubricating evaporator • fan motor(s) and larger fan blades give True undercounter units a more efficient low velocity, high volume airflow design. This unique design ensures faster temperature recovery and shorter run times in the busiest of foodservice environments.

Condensing unit access located in back, slides • out for easy maintenance.

Electric heated condensate pan.•

CABINET CONSTRUCTION

Exterior - stainless steel top, front and sides • with matching aluminum back.

Interior - attractive, NSF approved, white • aluminum liner. Stainless steel floor with coved corners.

Insulation - entire cabinet structure and solid • doors are foamed-in-place using Ecomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

1• 1/2" (39 mm) diameter dual swivel castors permits easy placement. 31 7/8" (810 mm) work surface height.

DOORS

Stainless steel exterior with white aluminum • liner to match cabinet interior.

Each door fitted with 12" (305 mm) long • recessed handle that is foamed-in-place with a sheet metal interlock to ensure permanent attachment.

Positive seal self-closing door(s) with 90°stay • open feature. Door(s) swing within cabinet dimensions.

Magnetic door gasket(s) of one piece • construction, removable without tools for ease of cleaning.

SHELVING

Four (4) adjustable, heavy duty PVC coated • wire shelves 27 1/2"L x 16"D (699 mm x 591 mm). Four (4) chrome plated shelf clips included per shelf.

Shelf support pilasters made of same material • as cabinet interior; shelves are adjustable on 1/2" (13 mm) increments.

MODEL FEATURES

Evaporator is epoxy coated to eliminate the • potential of corrosion.

NSF-7 compliant for open food product.•

ELECTRICAL

Unit completely pre-wired at factory and • ready for final connection to a 115/60/1 phase, 15 amp dedicated outlet. Cord and plug set included.

OPTIONAL FEATURES/ACCESSORIES

Upcharge and lead times may apply.

230 - 240V / 50 Hz. ❑ Barrel locks (factory installed). Requires one ❑ per door.

Additional shelves. ❑ 30" (762 mm) deep, ❑ 1/2" thick (13 mm), white polyethylene cutting board.

30" (762 mm) deep, ❑ 1/2" thick (13 mm), composite cutting board.

Heavy duty 16 gauge tops. ❑ Exterior rectangular digital thermometer ❑ (factory installed).

Standard height units with 5" (127 mm) ❑ diameter castors. 36" (915 mm) work surface height.

ADA compliant models with 34" (864 mm) ❑ work surface height.

Undercounter:

Low Profile Solid Door Refrigerator

Model Elevation Right Plan 3D Back

TUC-60-LP TFQY103E TFQY103S TFQY03P TFQY1033

WARRANTY

One year warranty on all parts and labor and an additional 4 year warranty on compressor.

(U.S.A. only)

Verismo® 701 espresso machine

Verismo® 701

Verismo® 701 Specs

Electrical Plug L6-30p

Installation requirements Utilities

Electrical

Weight

Maintenance

Water System

softeners.

Dimensions

Verismo® 701 Features vs. Traditional Espresso Machines Verismo 701 Espresso Machine Traditional Espresso Machines

Grinders included Yes no

Automatic grind and dose Yes no

Thermostatically controlled steam wand Yes no

Estimated time to clean machine 10 minutes per day 20–30 minutes per day

Estimated operator training time 30 minutes per day 4 hours*

* Although training could be done in four hours, it may take up to two weeks to perfect drinks comparable to the Verismo® 701.

For pricing, terms of warranty, installation and service, contact your Starbucks Foodservice representative.

© 2011 Starbucks Coffee Company. All rights reserved.

MariaJ Typewritten Text

MariaJ Typewritten Text

MariaJ Typewritten Text

MariaJ

2110 South 26th Street

PO Box 1720

Manitowoc, WI 54221-1720 USA

Tel: 1.920.682.0161

Fax: 1.920.683.7589 www.manitowocice.com

QM-30 • QM-45 Ice Cube Machines

Q M

-30 • Q M

-45 Ice C ube M achines

Model

QM-30A QM-45A

Dice 7⁄8" x 7⁄8" x 7⁄8" (2.22 x 2.22 x 2.22 cm)

Ice Shape

Standard Features

• Compact size. Ideal for any small-volume ice need.

• Clean, crisp, coordinated interior.

• AlphaSan® in key internal components to extend time between cleanings.

• Flat, right-angle plug for easier installation in tight spaces.

• Attractive stainless steel cabinet

• Easy access door, slides up & out of the way.

• Patented cleaning and sanitizing technology.

• Easy access air filter designed for longer operation in greasy and dusty environments.

• Front air intake and exhaust.

• CFC-FREE R-134A refrigerant.

• Manitowoc proven vertical evaporator using proprietary technology - made in Manitowoc, WI.

• Computerized control.

Warranty

• 3-year parts-and-labor warranty.

• Ranging from 60 lbs. (27 kgs) to 95 lbs.

(43 kgs) daily ice production with a storage capacity of 30 lbs. (14 kgs.)

• Only 19.69" (50 cm) wide, 22.34" (56.75 cm) deep, and 36" (91.44 cm) high on 6" (15.24 cm) legs.

Specifications BTU Per Hour:

QM-30: 1,600 (average) 2,350 (peak)

QM-45: 1,750 (average) 2,600 (peak)

Compressor:

Nominal rating: 1/4 HP

Legs:

Adjustable from 6.00"-7.25" (15.24-17.78 cm).

Ice Storage:

One piece bin liner (seamless) “rotocast” polyethylene.

Insulation:

Insulation foamed-in-place with CFC-FREE foam.

Refreshing!

Manitowoc® Ice Undercounters

Operating Limits:

• Ambient Temperature

Range:

QM-30: 50˚ to 113˚F (10˚ to 45˚C) QM-45: 40˚ to 110˚F (1.6˚ to 43˚C)

• Water Temperature Range:

QM-30: 50˚ to 86˚F (10˚ to 40˚C) QM-45: 33˚ to 90˚F (0.6˚ to 32˚C)

• Water Pressure Ice Maker Water In:

QM-30: Min. 34 psi (240 kPA) Max. 90 psi (620 kPA) QM-45: Min. 20 psi (138 kPA) Max. 80 psi (551 kPA)

Ice Machine Electric 115/60/1. (230/50/1 also available.) 115/60/1 ice machines are factory pre-wired with a 6' (180 cm) power cord and NEMA 5-15P-plug configuration.

Total ampacity:

QM-30: 5.3 amps.

QM-45: 5.2 amps.

Maximum fuse size:

15 amps.

HACR-type circuit breakers can be used in place of fuses.

MariaJ Typewritten Text

MariaJ Typewritten Text

MariaJ Typewritten Text

Stephanie Line

Stephanie Line

2110 South 26th Street

PO Box 1720

Manitowoc, WI 54221-1720 USA

Tel: 1.920.682.0161

Fax: 1.920.683.7589 www.manitowocice.com

60 Cycle Legs 15.24cm 17.78cm (6.00" 7.25")

56.74cm (22.34")

79.00cm (30.00")

15.24 cm (6.00")

50.00cm (19.69")

7.32cm (2.88")

15.73cm (6.19") 9.78cm

(3.85")

15.09cm (5.94")

20.80cm (8.19")

8.51cm (3.35")

A

B

C

Ice Making Water/Bin Drain

Electrical Entrance

Ice Making Water Inlet

A

B

C

*For QM-30, .75" (1.9 cm) Male Hose Connection. A 3/4” (1.9 cm) by 11-1/2 threads per inch to 14 threads per inch adapter is factory installed.

Remove this adapter if 11-1/2 threads per inch connection is desired. For the QM-45, 3/8" (.95 cm) Female Hose Connection.

Installation Note - There is no minimum clearance required, however recommended clearance for top, sides, and back is 5" (12.7 cm).

QM-30

QM-45

Model Ice Shape

Ice Production 24 Hours Power kWh/100 lbs. @ 90°/70°F

Potable Water Usage @ 90°/70°F per 100 lbs/45.5 kgs of ice

Storage Bin Capacity

70° Air/50°F Water 21° Air/10°C Water

90° Air/70°F Water 32° Air/21°C Water

QM-30A Dice 60 lbs. 49 lbs.

20.4 38.4 gal 30 lbs.

27 kgs 22 kgs 14 kgs

QM-45A Dice 95 lbs. 62 lbs.

15.1 38.6 gal 30 lbs.

43 kgs 28 kgs 14 kgs

“A” following model number indicates “Air” cooled condensing unit.

Q

M -30 • Q

M -45 Ice C ube M achines

B

M an ito w oc

/1

C on tin ui ng p ro du ct im pr ov em en t m ay n ec es si ta te c ha ng e of s pe ci fic at io ns w ith ou t n ot ic e.

Air Flow Top View

Air in left, air out right, no side vents. Great for installation under countertops and next to other equipment.

Slides out from left side front without tools, easy to clean, reusable filter protects condenser from lint, grease and dust.

Air Filter

Initiate ice, off and clean operations with simple upfront selector switch. No need to remove front panel. Now easier to see and access.

Front Access

Features

Related Products

Item#

Project

Date

For current specification sheets and other information, go to www.bunn.com.

Patents Apply

2.2 liter Push-Button Airpot Product No. : 28696.0002 capacity: 74 oz. (2.19 L)

2.5 liter Push-Button Airpot Product No. : 13041.0001 capacity: 84 oz. (2.48 L)

2.5 liter Lever-Action Airpot Product No. : 32125.0000 capacity: 84 oz. (2.48 L)

3.0 liter Lever-Action Airpot Product No. : 32130.0000 capacity: 102 oz. (3.0 L)

Universal Airpot Racks for push-button and lever-action airpots.

See page A3.9 for more information.

Gourmet C Funnel Product No.: 34559.0001 (7.62 inch width)

• Universal design – handle may be moved to appropriate side

• allows brewing with heavier throw weights of coffee.

• Paper Filter Pack Product No. : 20100.0000

Packed per case: 1,000

10/09 A3.4b

Model Agency Listing aXIom twin aPS

AXIOM™ Twin Airpot Coffee Brewer

Model AXIOM Twin APS with Airpots

(airpots sold separately) Dimensions: 23.5” H x 16” W x 17.7” D (59.7cm H x 40.6cm W x 44.9cm D)

UL LISTED

Easy Clear® EQHP-10 Product No. : 39000.0004

Easy Clear® EQHP-10L Product No. : 39000.0001

Easy Clear® Scale Pro Product No.: 39000.0010

Paper Filter Pack Product No. : 20115.0000 Packed per case: 1,000 Dimensions: 41⁄4" Base x 23⁄4" Sidewall

10.8 cm Base x 6.98 cm Sidewall

AXIOM Twin Airpot Coffee Brewer

• Brews 15 gallons (56.8 litres) of perfect coffee per hour.

• Brews directly into 1.9 to 3 litre airpots.

• twin brew head system.

• For high lime areas, BrewLoGIc® technology calculates flow rate and adjusts brew time to maintain consistent pot levels.

• BrewWIZarD® technology incorporates simplified programming with a LcD display.

• Hot water faucet.

• convenient airpots keep coffee hot for hours.

• airpots are easily transported to remote meeting rooms, breakfast bars, etc.

• SplashGard® funnel deflects hot liquids away from the hand.

• Digital temperature control and accuracy.

• Pot level, cold brew lock-out and tank temperature set easily from advanced touch pad on front of machine.

• electronic diagnostics and built-in tank drain make service easier.

• coffee extraction controlled with programmable pre-infusion or pulse brew.

• energy-saver mode reduces tank temperature during idle periods.

MariaJ Typewritten Text 8 & B10

MariaJ Typewritten Text

MariaJ

BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

all dimensions shown in inches.

Dimensions & Specifications

Bunn-o-matic® corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com

Model Product # Volts Amps Tank Heater Total Brewing Cu. Shipping Cord Watts Watts Capacity Ft. Weight Attached aXIom twin aPS 38700.0013 120/240 26 2 @ 3000 6100 15 gal./hr. 7.3 64 lbs. No

Brewing capacity: based upon incoming water temp of 60ºF (140ºF rise) per 1/2 gallon brew time of 4 minutes.

Models listed as 120/208V or 120/240V must be connected to 208V or 240V electrical service respectively. Please refer to the installation manual.

electrical: 3-wires plus ground service rated 120/240V, single phase, 60Hz.

Plumbing: 20-90 psi (138-621 kPa). machine supplied with 3⁄8” male flare fitting.

10/09 © Bunn-O-Matic Corporation