36C25818B0305-0001000.docx

5. PROJECT NUMBER (if applicable)

CODE

7. ADMINISTERED BY

2.

AMENDMENT/MODIFICATION NUMBER

CODE

6. ISSUED BY

8. NAME AND ADDRESS OF CONTRACTOR

4. REQUISITION/PURCHASE REQ. NUMBER

3. EFFECTIVE DATE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED

PAGE

OF PAGES

10A. MODIFICATION OF

CONTRACT/ORDER NUMBER

10B. DATED

BPA NO.

1. CONTRACT ID CODE

FACILITY CODE

CODE

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

E. IMPORTANT:

is extended

(a) By completing Items 8 and 15, and returning __________ copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR

ACKNOWLEDGMENT TO

BE RECEIVED

AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY is not extended

12. ACCOUNTING AND APPROPRIATION DATA

(REV.

11/2016) is required to sign this document and return ___________ copies to the issuing office.

is not, A. THIS CHANGE ORDER IS ISSUED PURSUANT TO:

Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITE M 10A.

15C. DATE SIGNED

B. THE ABOVE NUMBERED CONTRACT/ORDER

IS MODIFIED

TO REFLECT THE ADMINISTRATIVE CHANGES

SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR

43.103(b).

RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes r eference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

C. THIS SUPPLEMENTAL AGREEMENT IS

ENTERED INTO

PURSUANT TO AUTHORITY OF:

D. OTHER

BY

Contractor

16C. DATE SIGNED

14.

DESCRIPTION OF AMENDMENT/MODIFICATION

16B. UNITED STATES OF AMERICA

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME

AND TITLE OF SIGNER

16A. NAME AND TITLE OF CONTRACTING OFFICER

15B. CONTRACTOR/OFFEROR

STANDARD FORM 30

PREVIOUS EDITION NOT USABLE

Prescribed by GSA - FAR (48 CFR) 53.243 (Type or print) (Type or print) (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

(Number, street, county, State and ZIP Code) (If other than Item 6) (Specify type of modification and authority) (such as changes in paying office, appropriation date, etc.)

(If required)

(SEE ITEM 11)

(SEE ITEM 13)

(X)

CHECK

ONE

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS

OF SOLICITATIONS

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

(Signature of person authorized to sign) (Signature of Contracting Officer) 06-11-2018

691-14-121WL

Department of Veterans Affairs NCO22-Gilbert Network Contracting 777 E. Missouri, Suite 300 Phoenix AZ 85014 Department of Veterans Affairs NCO22-Gilbert Network Contracting 777 E. Missouri, Suite 300 Phoenix AZ 85014 To all Offerors/Bidders

36C25818B0305 06-06-2018

X X X Purchase Order No.:

TBD

X one The Purpose of Amendment No.: A00001 Is TO:

1. Publish New Bid Sheet Schedule.

2. Publish New General Condtions.

3. Publish Pre-Solicitation Sign in Sheet.

4. All RFI's need to be submitted by email to gary.smith4@va.gov

Justin Hicks See attached document: S02 NEW 00 00r2 General Requirements.

SF 1442 box #17 continued:

STATEMENT OF BID ITEM(S)

Main Bid Items A. ITEM I, GENERAL CONSTRUCTION: Work includes general construction, selective demolition, alterations, canteen equipment installation, mechanical, plumbing, electrical, fire protection, and certain other items.

1. For funding source allocation. Provide a separate cost breakdown for the following items:

a. Material only costs for the following items:

1) Resin Accent and Divider Panels (W-6, W-7)

2) Resin Chair Rail (CH-1)

3) Side-folding Grilles – Open Design (Section 08 35 00)

4) Floor Finish Resilient Flooring: Luxury Vinyl Tile (F-2, F-3)

5) Floor Finish and Integral Cove: Resinous Flooring (F-1, B-2)

6) Wall Base: Solid Vinyl (B-1)

7) Wall Base: Resilient Base (B-3)

8) Wall Finish: Painted Gypsum Board (Impact Resistant and/or Type X) (W-1, W-2, W-3)

9) Wall Finish: Gyp. Board Accessories (Basis of Design: Fry Reglet (R-1, R-2)

10) Wall Finish: Textured Wall (Basis of Design: 3-Form ‘Carve’ (W-8))

11) Wall Finish: Ceramic/Porcelain Tile (W-4, W-5) and Grout (GR-1)

12) Ceiling Finish: Acoustical Ceiling Tile and Grid (C-1)

13) Ceiling Finish: Acoustical Ceiling Tile and Grid (C-5; Kitchen, Room #1459 only)

14) Ceiling Finish: Painted Impact Resistant Type X Gypsum Board (C-2, C-3, C-4)

15) Ceiling and Wall Light Fixtures (A, A1, B, C, C1, D, F, X)

16) Corner Guards (CG-1, CG-2)

17) Column Cover (COL-1)

18) Door Paint (DR-1)

19) Door Frame Paint (HMF-1)

20) Wall Murals: HD Vinyl – Texture Wall Covering (M-1)

21) Solid Surface (SS-1, SS-3)

22) Wall Reveal and Trim: (R-1, R-2)

23) Upholstery for fixed benches (U-1, U-2)

b. Design Build the following:

1) Design and replace existing exhaust duct at hoods X1 and X2 with new stainless-steel exhaust duct with 3M fire wrap. The new duct shall be designed to have minimum velocity for grease exhaust (1800-2500 FPM) and slope down for grease collection and be accessible for duct cleaning and maintenance. Design and replace hood exhaust fans to accommodate the new hood CFM. Provide structural anchorage and bracing for all new work.

2) Utilize AH-16 for the air distribution as part of the make-up system for the kitchen hood. Design and upgrade AH-16 to accommodate the make-up air for the kitchen exhaust including increased CFM. Replace fan motors and VFD as required. Provide power for kitchen exhaust fans. Design and modify existing AH-16 supply air duct and its air distribution to accommodate the make-up air for exhaust hoods. Provide power to AH-16 to accommodate fan motor upgrades. Provide DDC controls which are compatible with existing Hospital DDC control system. Controls shall interlock between exhaust fan and make-up air system, sequence of operation and fire alarm shutdown. Provide power to control panels.

3) Conduct pre-read of the inlet/outlet and AHU system serving the entire Canteen/Cafeteria. Balance the air at conclusion of the construction.

4) Conduct Electrical Panel reading to verify capacity.

2. The Canteen Equipment will be furnished by the Government (Contractor to provide installation including all anchorage, utilities, and accessories as applicable for a fully functional facility).

3. Casework at the Food Court and Starbucks area will be furnished by the Government (Contractor to provide installation including all anchorage, utilities, and accessories as applicable for a fully functional facility).

4. Movable furniture shall be furnished by the Government.

5. Built-in furniture (except items noted above, i.e. Canteen and Food Court casework) shall be furnished and installed by the Contractor (Contractor to coordinate the color and finishes with the Government-furnished movable furniture).

6. Contract completion time shall be:

a. Construction: 270 calendar days

A: TOTAL BASE BID PRICE LABOR ONLY: _______________________________

TOTAL BASE BID PRICE MATERIALS ONLY: ___________________________

TOTAL BASE BID PRICE PROFIT ONLY: _______________________________

TOTAL BASE BID PRICE OVERHEAD ONLY: ___________________________

TOTAL BASE BID COMBINED: _________________________________________

B: TOTAL BID PRICE LABOR ONLY: _______________________________

TOTAL BID PRICE MATERIALS ONLY: ___________________________

TOTAL BID PRICE PROFIT ONLY: _______________________________

TOTAL BID PRICE OVERHEAD ONLY: ___________________________

TOTAL BID COMBINED: _________________________________________

C: TOTAL BID PRICE LABOR ONLY: _______________________________

TOTAL BID PRICE PROFIT ONLY: _______________________________

D: TOTAL BID PRICE LABOR ONLY: _______________________________

TOTAL BID PRICE PROFIT ONLY: _______________________________