36C25818B0305-0003002.pdf

Product Specifications Lengths include end panelsCombination Convertible Service Above Refrigerated

Self-Service Case

Features Standard Options

EXTERIOR COLOR

INTERIOR COLOR

REAR EXTERIOR COLOR

TRIM COLOR

BASE

LOWER REAR

UPPER REAR

ELECTRICAL CONNECT

REFRIGERATION

MISCELLANEOUS

ACCESSORIES

888 E. Porter Rd.

Muskegon, MI 49441 Ph. 231-798-8888 Fx. 231-798-4960 www.structuralconcepts.com

Note: Information is subject to change at any time.

Visit www.structuralconcepts.com for the most current specs.

MariaJ Typewritten Text

Stephanie Line

Stephanie Line

Intended Environment:

Integrated Prod Temp ° F Intended Product To Be Displayed Zone

Model Technical Specifications

Model L1" L2" WattsFreqPhsSystem Circuit Volts Wires BTUH Frt ClsNEMA Plug

Ship Wt

Amps

*** SSTL"

Regulatory Approvals:

Important Notes:

888 E. Porter Rd.

Muskegon, MI 49441 Ph. 231-798-8888 Fx. 231-798-4960 www.structuralconcepts.com

Note: Information is subject to change at any time.

Visit www.structuralconcepts.com for the most current specs.

ITEM NO. ______________________________________________________

PROJECT ______________________________________________________

LOCATION _____________________________________________________

DATE _________________________ QTY. ___________________________

908 Highway 15 North • New Albany, MS 38652 PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com

FEATURES

CONSTRUCTION

• Seamless stainless steel top

• 24 gauge painted textured galvanized steel cabinet

• Galvanized steel interior

• Equipped with leveling legs to correct for unlevel flooring situations

• Floor drain with garden hose fitting

• Galvanized steel inner liner with cold wall evaporator

• Anti-condensate heaters under stainless top cap

• 21/4" foamed-in-place “zero ODP” urethane insulation

LIDS

• Stainless steel

• Hinged with handles

• Gasket

REFRIGERATION

• Refrigerant:

DC-12D ..........................R-404A

All other models ............ R-134a

• Self-contained, factory tested refrigeration system

• Force draft hermetic condensing unit (semi-hermetic unit on DC- 12D with wire and tube con-denser for low maintenance)

• Minimum 4" clearance required between cabinet back and wall

• Temperature range:

10° to -10°F (-12° to -23°C)

• R-factor (insulation efficiency rating): 19.40

WARRANTY

• Standard limited two year parts and labor

• Additional three year coverage on compressor part

FEATURES

DC-2S

DC SERIES

Conventional Ice Cream Storage/Dipping Cabinets

OPTIONS

❑ Add suffix “SE” for all-stainless exterior

❑ Custom colors ❑ Lid locks ❑ Legs ❑ Casters ❑ Additional lids ❑ Load level shelves ❑ Dipper well

MODELS

❑ DC-2S ❑ DC-8D

❑ DC-4S ❑ DC-10D

❑ DC-4D ❑ DC-12D

❑ DC-6D

C-UL listing for all models except

DC-12D.

DC-8D

Standard white

Black also available

STANDARD TEXTURED EXTERIOR

vhavcsboxdoj Typewritten Text 1A

Highlight

NOTE: Cabinet designed for optimum performance in air-conditioned area at 75°F ambient and 55% relative humidity.

All specifications subject to change without notice.

908 Highway 15 North • New Albany, MS 38652 PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com

DC SERIES

CONVENTIONAL ICE CREAM STORAGE/DIPPING CABINETS

TECHNICAL SPECIFICATIONS

LISTINGS HOOKUP

BID SPECIFICATIONS

Item no. DC-_______________ Provide_____________( ) Conventional Ice Cream Storage/Dipping Cabinet(s), Master-Bilt® model DC-________.

Cabinet will feature textured finish on exterior with galvanized steel interior.

Cabinet to have flip lids, seamless stainless steel top, 24 gauge steel walls, galvanized steel inner liner with cold wall evapora-

287-10/16-web ©2016 Master-Bilt Products, an unincorporated division of Standex International Corporation. All rights reserved. Printed in U.S.A.

Via plug in, 9 foot long, flexible 3 wire 14/3 cord with molded plug. Ten amp 115V service is recommended.

PLAN VIEW SIDE VIEW ELEVATION VIEW

tor, anti-condensate heaters under stain-less steel top, 21/4" foamed-in-place “zero ODP” urethane insulation and baked-on polyester enamel finish. Standard leveling legs provided to correct for unlevel flooring situations.

The refrigeration system will be self-contained. DC-12D will contain R-404A re-frigerant and all other models will contain

R-134a. The temperature range will be 10° to -10°F (-12° to -23°C).

Cabinet to have standard limited two year parts and labor with additional three year coverage on compressor part.

Cabinet to be UL, C-UL (on all except DC-12D) and NSF listed.

NEMA 5-15P

MODEL

DIMENSIONS

(in.)

DIMENSIONS

(mm)

VOLTS AMPS

UNIT

H.P.

CAN CAP.

DISPLAY/

STORAGE*

CAP.

CU. FT.

SHIP

CU. FT.

SHIP

WT.

LB/KGL D H L D H

DC-2S 317/8 211/8 341/8 810 537 867 115 5.7 1/4 3/1 5.2 19.0 220/100

DC-4S 54 211/8 341/8 1372 537 867 115 5.7 1/4 6/4 11.0 36.0 280/127

DC-4D 305/8 301/8 341/8 778 765 867 115 5.7 1/4 5/2 7.6 27.0 220/100

DC-6D 43 301/8 341/8 1092 765 867 115 5.7 1/4 8/5 12.5 39.0 275/125

DC-8D 54 301/8 341/8 1372 765 867 115 7.3 1/3 11/8 17.3 47.0 365/164

DC-10D 665/8 301/8 341/8 1692 765 867 115 7.3 1/3 14/11 22.0 59.0 430/195

DC-12D 845/8 301/8 341/8 2149 765 867 115 7.5 1/3** 18/15 29.1 71.0 490/223

*Capacity in 3 gal. cans **Semi-hermetic compressor

C-UL listing for all models except DC-12D.

Highlight

Specifications subject to change without notice.

Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).

Rough-In Data

2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl Fax# (001)636-272-7546 Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com

Model:

TRUE FOOD SERVICE

EQUIPMENT, INC.

Project Name:

Location:

Item #: Qty:

Model #:

AIA #

SIS #

Printed in U.S.A.

ApprovAls: AvAilAble At:

ADA & Low Profile Comparison

Standard ADA Low Profile 36" height 34" height 317/8" height (915 mm) (864 mm) (810 mm)

11/2” diameter dual swivel castors for “LP” models.

TUC-60-LP

Undercounter:

Low Profile Solid Door Refrigerator

TUC-60-LP

Designed using the highest � quality materials and components to provide the user with colder product temperatures, lower utility costs, exceptional food safety and the best value in today’s food service marketplace.

"Low Profile" models are � designed to slide easily under custom built countertops.

1 � 1/2" (39 mm) diameter dual swivel castors. 31 7/8" (810 mm) work surface height.

Oversized, factory balanced, � refrigeration system holds 33°F to 38°F (.5°C to 3.3°C).

All stainless steel front, top � and cabinet ends. Matching aluminum finished back.

Attractive, NSF approved, white � aluminum interior liner with stainless steel floor.

Self closing door(s). Positive � seal, torsion type closure system.

Foamed-in-place using � Ecomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

Model Doors Shelves

Cabinet Dimensions (inches)

(mm) Counter Height HP Voltage Amps

NEMA

Config.

Cord Length

(total ft.)

(total m)

Crated Weight

(lbs.)

(kg)L D† H*

TUC-60-LP 2 4 603/8 301/8 293/4 317/8 1/5 115/60/1 6.5 5-15P 7 340

1534 766 756 1/3 230-240/50/1 5.6 ▲ 2.13 155

† Depth does not include 1" (26 mm) for rear bumpers.

* Height does not include 21/8" (54 mm) for castors.

▲Plug type varies by country.

TRUE REFRIGERATION

MADE IN

SINCE 1945

U.S.A.

9/11 vhavcsboxdoj Typewritten Text

StanDaRD FeatuReS

Model:

TRUE FOOD SERVICE EQUIPMENT

2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com

METRIC DIMENSIONS ROUNDED UP TO THE

NEAREST WHOLE MILLIMETER

SPECIFICATIONS SUBJECT TO CHANGE

WITHOUT NOTICE

Plan VIew

KCL

TUC-60-LP

DESIGN

True’s undercounter’s are designed with • enduring quality and value that protects your long term investment. Our commitment to using the highest quality materials and oversized refrigeration ensures exceptional food preservation.

“Low Profile” models are designed to slide • easily under custom built countertops.

REFRIGERATION SYSTEM

Factory engineered, self-contained, capillary • tube system using enviromentally friendly (CFC free) 134A refrigerant.

Oversized, factory balanced refrigeration • system with guided airflow to provide uniform product temperatures.

Extra large evaporator coil balanced with • higher horsepower compressor and large condenser maintains cabinet temperatures of 33°F to 38°F (.5°C to 3.3°C) for the best in food preservation.

Sealed, cast iron, self-lubricating evaporator • fan motor(s) and larger fan blades give True undercounter units a more efficient low velocity, high volume airflow design. This unique design ensures faster temperature recovery and shorter run times in the busiest of foodservice environments.

Condensing unit access located in back, slides • out for easy maintenance.

Electric heated condensate pan.•

CABINET CONSTRUCTION

Exterior - stainless steel top, front and sides • with matching aluminum back.

Interior - attractive, NSF approved, white • aluminum liner. Stainless steel floor with coved corners.

Insulation - entire cabinet structure and solid • doors are foamed-in-place using Ecomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

1• 1/2" (39 mm) diameter dual swivel castors permits easy placement. 31 7/8" (810 mm) work surface height.

DOORS

Stainless steel exterior with white aluminum • liner to match cabinet interior.

Each door fitted with 12" (305 mm) long • recessed handle that is foamed-in-place with a sheet metal interlock to ensure permanent attachment.

Positive seal self-closing door(s) with 90°stay • open feature. Door(s) swing within cabinet dimensions.

Magnetic door gasket(s) of one piece • construction, removable without tools for ease of cleaning.

SHELVING

Four (4) adjustable, heavy duty PVC coated • wire shelves 27 1/2"L x 16"D (699 mm x 591 mm). Four (4) chrome plated shelf clips included per shelf.

Shelf support pilasters made of same material • as cabinet interior; shelves are adjustable on 1/2" (13 mm) increments.

MODEL FEATURES

Evaporator is epoxy coated to eliminate the • potential of corrosion.

NSF-7 compliant for open food product.•

ELECTRICAL

Unit completely pre-wired at factory and • ready for final connection to a 115/60/1 phase, 15 amp dedicated outlet. Cord and plug set included.

OPTIONAL FEATURES/ACCESSORIES

Upcharge and lead times may apply.

230 - 240V / 50 Hz. ❑ Barrel locks (factory installed). Requires one ❑ per door.

Additional shelves. ❑ 30" (762 mm) deep, ❑ 1/2" thick (13 mm), white polyethylene cutting board.

30" (762 mm) deep, ❑ 1/2" thick (13 mm), composite cutting board.

Heavy duty 16 gauge tops. ❑ Exterior rectangular digital thermometer ❑ (factory installed).

Standard height units with 5" (127 mm) ❑ diameter castors. 36" (915 mm) work surface height.

ADA compliant models with 34" (864 mm) ❑ work surface height.

Undercounter:

Low Profile Solid Door Refrigerator

Model Elevation Right Plan 3D Back

TUC-60-LP TFQY103E TFQY103S TFQY03P TFQY1033

WARRANTY

One year warranty on all parts and labor and an additional 4 year warranty on compressor.

(U.S.A. only)

Verismo® 701 espresso machine

Verismo® 701

Verismo® 701 Specs

Electrical Plug L6-30p

Installation requirements Utilities

Electrical

Weight

Maintenance

Water System

softeners.

Dimensions

Verismo® 701 Features vs. Traditional Espresso Machines Verismo 701 Espresso Machine Traditional Espresso Machines

Grinders included Yes no

Automatic grind and dose Yes no

Thermostatically controlled steam wand Yes no

Estimated time to clean machine 10 minutes per day 20–30 minutes per day

Estimated operator training time 30 minutes per day 4 hours*

* Although training could be done in four hours, it may take up to two weeks to perfect drinks comparable to the Verismo® 701.

For pricing, terms of warranty, installation and service, contact your Starbucks Foodservice representative.

© 2011 Starbucks Coffee Company. All rights reserved.

MariaJ Typewritten Text

MariaJ Typewritten Text

MariaJ Typewritten Text

MariaJ

2110 South 26th Street

PO Box 1720

Manitowoc, WI 54221-1720 USA

Tel: 1.920.682.0161

Fax: 1.920.683.7589 www.manitowocice.com

QM-30 • QM-45 Ice Cube Machines

Q M

-30 • Q M

-45 Ice C ube M achines

Model

QM-30A QM-45A

Dice 7⁄8" x 7⁄8" x 7⁄8" (2.22 x 2.22 x 2.22 cm)

Ice Shape

Standard Features

• Compact size. Ideal for any small-volume ice need.

• Clean, crisp, coordinated interior.

• AlphaSan® in key internal components to extend time between cleanings.

• Flat, right-angle plug for easier installation in tight spaces.

• Attractive stainless steel cabinet

• Easy access door, slides up & out of the way.

• Patented cleaning and sanitizing technology.

• Easy access air filter designed for longer operation in greasy and dusty environments.

• Front air intake and exhaust.

• CFC-FREE R-134A refrigerant.

• Manitowoc proven vertical evaporator using proprietary technology - made in Manitowoc, WI.

• Computerized control.

Warranty

• 3-year parts-and-labor warranty.

• Ranging from 60 lbs. (27 kgs) to 95 lbs.

(43 kgs) daily ice production with a storage capacity of 30 lbs. (14 kgs.)

• Only 19.69" (50 cm) wide, 22.34" (56.75 cm) deep, and 36" (91.44 cm) high on 6" (15.24 cm) legs.

Specifications BTU Per Hour:

QM-30: 1,600 (average) 2,350 (peak)

QM-45: 1,750 (average) 2,600 (peak)

Compressor:

Nominal rating: 1/4 HP

Legs:

Adjustable from 6.00"-7.25" (15.24-17.78 cm).

Ice Storage:

One piece bin liner (seamless) “rotocast” polyethylene.

Insulation:

Insulation foamed-in-place with CFC-FREE foam.

Refreshing!

Manitowoc® Ice Undercounters

Operating Limits:

• Ambient Temperature

Range:

QM-30: 50˚ to 113˚F (10˚ to 45˚C) QM-45: 40˚ to 110˚F (1.6˚ to 43˚C)

• Water Temperature Range:

QM-30: 50˚ to 86˚F (10˚ to 40˚C) QM-45: 33˚ to 90˚F (0.6˚ to 32˚C)

• Water Pressure Ice Maker Water In:

QM-30: Min. 34 psi (240 kPA) Max. 90 psi (620 kPA) QM-45: Min. 20 psi (138 kPA) Max. 80 psi (551 kPA)

Ice Machine Electric 115/60/1. (230/50/1 also available.) 115/60/1 ice machines are factory pre-wired with a 6' (180 cm) power cord and NEMA 5-15P-plug configuration.

Total ampacity:

QM-30: 5.3 amps.

QM-45: 5.2 amps.

Maximum fuse size:

15 amps.

HACR-type circuit breakers can be used in place of fuses.

MariaJ Typewritten Text

MariaJ Typewritten Text

MariaJ Typewritten Text

Stephanie Line

Line

2110 South 26th Street

PO Box 1720

Manitowoc, WI 54221-1720 USA

Tel: 1.920.682.0161

Fax: 1.920.683.7589 www.manitowocice.com

60 Cycle Legs 15.24cm 17.78cm (6.00" 7.25")

56.74cm (22.34")

79.00cm (30.00")

15.24 cm (6.00")

50.00cm (19.69")

7.32cm (2.88")

15.73cm (6.19") 9.78cm

(3.85")

15.09cm (5.94")

20.80cm (8.19")

8.51cm (3.35")

A

B

C

Ice Making Water/Bin Drain

Electrical Entrance

Ice Making Water Inlet

A

B

C

*For QM-30, .75" (1.9 cm) Male Hose Connection. A 3/4” (1.9 cm) by 11-1/2 threads per inch to 14 threads per inch adapter is factory installed.

Remove this adapter if 11-1/2 threads per inch connection is desired. For the QM-45, 3/8" (.95 cm) Female Hose Connection.

Installation Note - There is no minimum clearance required, however recommended clearance for top, sides, and back is 5" (12.7 cm).

QM-30

QM-45

Model Ice Shape

Ice Production 24 Hours Power kWh/100 lbs. @ 90°/70°F

Potable Water Usage @ 90°/70°F per 100 lbs/45.5 kgs of ice

Storage Bin Capacity

70° Air/50°F Water 21° Air/10°C Water

90° Air/70°F Water 32° Air/21°C Water

QM-30A Dice 60 lbs. 49 lbs.

20.4 38.4 gal 30 lbs.

27 kgs 22 kgs 14 kgs

QM-45A Dice 95 lbs. 62 lbs.

15.1 38.6 gal 30 lbs.

43 kgs 28 kgs 14 kgs

“A” following model number indicates “Air” cooled condensing unit.

Q

M -30 • Q

M -45 Ice C ube M achines

B

M an ito w oc

/1

C on tin ui ng p ro du ct im pr ov em en t m ay n ec es si ta te c ha ng e of s pe ci fic at io ns w ith ou t n ot ic e.

Air Flow Top View

Air in left, air out right, no side vents. Great for installation under countertops and next to other equipment.

Slides out from left side front without tools, easy to clean, reusable filter protects condenser from lint, grease and dust.

Air Filter

Initiate ice, off and clean operations with simple upfront selector switch. No need to remove front panel. Now easier to see and access.

Front Access

Features

Related Products

Item#

Project

Date

For current specification sheets and other information, go to www.bunn.com.

Patents Apply

2.2 liter Push-Button Airpot Product No. : 28696.0002 capacity: 74 oz. (2.19 L)

2.5 liter Push-Button Airpot Product No. : 13041.0001 capacity: 84 oz. (2.48 L)

2.5 liter Lever-Action Airpot Product No. : 32125.0000 capacity: 84 oz. (2.48 L)

3.0 liter Lever-Action Airpot Product No. : 32130.0000 capacity: 102 oz. (3.0 L)

Universal Airpot Racks for push-button and lever-action airpots.

See page A3.9 for more information.

Gourmet C Funnel Product No.: 34559.0001 (7.62 inch width)

• Universal design – handle may be moved to appropriate side

• allows brewing with heavier throw weights of coffee.

• Paper Filter Pack Product No. : 20100.0000

Packed per case: 1,000

10/09 A3.4b

Model Agency Listing aXIom twin aPS

AXIOM™ Twin Airpot Coffee Brewer

Model AXIOM Twin APS with Airpots

(airpots sold separately) Dimensions: 23.5” H x 16” W x 17.7” D (59.7cm H x 40.6cm W x 44.9cm D)

UL LISTED

Easy Clear® EQHP-10 Product No. : 39000.0004

Easy Clear® EQHP-10L Product No. : 39000.0001

Easy Clear® Scale Pro Product No.: 39000.0010

Paper Filter Pack Product No. : 20115.0000 Packed per case: 1,000 Dimensions: 41⁄4" Base x 23⁄4" Sidewall

10.8 cm Base x 6.98 cm Sidewall

AXIOM Twin Airpot Coffee Brewer

• Brews 15 gallons (56.8 litres) of perfect coffee per hour.

• Brews directly into 1.9 to 3 litre airpots.

• twin brew head system.

• For high lime areas, BrewLoGIc® technology calculates flow rate and adjusts brew time to maintain consistent pot levels.

• BrewWIZarD® technology incorporates simplified programming with a LcD display.

• Hot water faucet.

• convenient airpots keep coffee hot for hours.

• airpots are easily transported to remote meeting rooms, breakfast bars, etc.

• SplashGard® funnel deflects hot liquids away from the hand.

• Digital temperature control and accuracy.

• Pot level, cold brew lock-out and tank temperature set easily from advanced touch pad on front of machine.

• electronic diagnostics and built-in tank drain make service easier.

• coffee extraction controlled with programmable pre-infusion or pulse brew.

• energy-saver mode reduces tank temperature during idle periods.

MariaJ Typewritten Text 8 & B10

MariaJ Typewritten Text

BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

all dimensions shown in inches.

Dimensions & Specifications

Bunn-o-matic® corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com

Model Product # Volts Amps Tank Heater Total Brewing Cu. Shipping Cord Watts Watts Capacity Ft. Weight Attached aXIom twin aPS 38700.0013 120/240 26 2 @ 3000 6100 15 gal./hr. 7.3 64 lbs. No

Brewing capacity: based upon incoming water temp of 60ºF (140ºF rise) per 1/2 gallon brew time of 4 minutes.

Models listed as 120/208V or 120/240V must be connected to 208V or 240V electrical service respectively. Please refer to the installation manual.

electrical: 3-wires plus ground service rated 120/240V, single phase, 60Hz.

Plumbing: 20-90 psi (138-621 kPa). machine supplied with 3⁄8” male flare fitting.

10/09 © Bunn-O-Matic Corporation

Engineered to provide dramatic sound reduction, world class reliability, unparalleled speed of service and a perfect blend every time.

INNOVATIVE DESIGN

Up to 4 Times Quieter Than the Competition Innovative vibration dampening technology creates Vitamix quality drinks in a more enjoyable customer atmosphere.

Magnetically Secured Floating Sound Enclosure Dramatically easier to clean and disassemble. No screws to damage the enclosure. No parts to lose.

Ultimate Blending Flexibility and Optimization Variable speed control and automatic shut-off provide flexibility in creating endless recipes.

The 4 program buttons (capability for 6) with 34 optimized programs in memory provide operators with easy, consistent drinks every time. Custom blending programs can easily be created for signature drinks.

Improved Speed of Service The Advance® container design reduces blend and pour time for faster customer service.

Designed for High Performance and Durability Air management and powerful ≈ 3 peak output horsepower motor reduces noise, improves reliability and reduces down time.

www.vitamix.com/foodservice

THE QUIET ONE®

MariaJ Typewritten Text

MariaJ

On Counter Blender Starbucks: #11007903 Vitamix: #036027

Motor: ≈ 3 peak output horsepower motor

Electrical: 120 V, 50/60 Hz, 15 A, Single Phase

Pack: Includes On Counter Blender with removable shroud.

Net Weight: 20.0 lbs., (28.0 lbs. with box)

Dimensions: Height with lid closed: 18.0 in. / 45,7 cm Height with lid open: 24.5 in. / 62,2 cm Depth with handle: 10.7 in. / 27,2 cm Width: 8.5 in. / 21,6 cm

FOR COMMERCIAL USE ONLY.

Warranty: The Quiet One is backed by a three-year parts and labor warranty on motor base unit.

In Counter (EB) Blender Starbucks: #11007909 Vitamix: #040015

Motor: ≈ 2 peak output horsepower motor

Electrical: 120 V, 50/60 Hz, 10 A, Single Phase

Pack: Includes In Counter Blender with removable shroud.

Dimensions: Height with lid closed: 12.6 in. / 32,1 cm Height with lid open: 19.3 in. / 48,9 cm Height below counter: 9.6 in. / 24,5 cm Depth above counter: 9.9 in / 25,1 cm Depth below counter: 9.1 in. / 23,1 cm Width: 8.3 in / 21,1 cm

North and South American Plug Configuration

Pitcher Kit Starbucks: #11008197 Vitamix: #015132 Includes five complete 36 oz. / 1,1 L containers, blade assemblies and lids. (3 dairy, 1 non dairy, and 1 soy)

36 oz. / 1,1 L Dairy Pitcher Starbucks: #11007902 Vitamix: #015105 Complete with blade assembly and lid.

36 oz. / 1,1 L Non Dairy Pitcher Starbucks: #11007910 Vitamix: #015106 Complete with blade assembly and lid.

36 oz. / 1,1 L Soy Pitcher Starbucks: #11007911 Vitamix: #015116 Complete with blade assembly and lid.

Vita-Mix Corporation 8615 Usher Road Cleveland, OH 44138-2103 U.S.A.

www.vitamix.com/foodservice

U.S.A., Canada & Latin America:

Tel: 800.4DRINK4 or 440.235.0214 E-mail: foodservice@vitamix.com

All Other Countries:

Tel: +1.440.782.2450 E-mail: international@vitamix.com ©2010 Vita-Mix® Corporation 12/10 102993

18.0 in.

45,7 cm

24.5 in.

62,2 cm

10.7 in. / 27,2 cm 11.5 in. / 29,2 cm8.5 in. / 21,6 cm

12.6 in.

32,1 cm

19.3 in.

48,9 cm

9.6 in.

24,5 cm

9.9 in. / 25,1 cm8.3 in. / 21,1 cm

9.1 in. / 23,1 cm

North and South American plug configuration applies to the following countries:

Bahamas Belize Bermuda Bolivia Canary Islands Cayman Islands

Columbia Costa Rica Dominican Rep.

Ecuador El Salvador Guam

Guatemala Honduras Mexico Puerto Rico United States scooper Text Box This Blender not available in Foodservice scooper Text Box Not available in Foodservice scooper Text Box Not available in Foodservice

The NCR RealPOS 70XRT—business accelerated The new NCR RealPOS 70XRT delivers extreme retail technology for today’s high-speed retail environment. Designed to accelerate your customer service and your ROI, the NCR RealPOS 70XRT combines business-optimized technologies, innovative retail design and industry-leading serviceability. Featuring extreme performance and scalability, exceptional energy efficiency and multi-tiered manageability, the NCR RealPOS 70XRT enhances the customer experience, empowers employees and reduces costs.

• Enhance the customer experience

The NCR RealPOS 70XRT is designed to accelerate your customer service with advanced platform technologies that allow you to deploy exciting customer-centric applications now or the future. You can personalize the customer experience with high-definition multimedia, interactive touch capabilities and a customizable consumer-facing display system for order verification, promotions and loyalty programs.

• Empower employees

The NCR RealPOS 70XRT is designed to improve your associates’ productivity with user-friendly interaction that’s fast, reliable and flexible. With our intuitive touchscreen interface and powerful multimedia capabilities, you can run the latest POS, back-office and training applications to improve efficiency and empower employees.

• Reduce cost of ownership

The NCR RealPOS 70XRT can reduce power consumption up to 50% over previous-generation POS terminals with energy-efficient Intel® processors and a high-efficiency power supply. Our industry-leading serviceability and manageability improve system availability and help reduce support costs. The NCR RealPOS 70XRT is designed to provide years of reliable operation, while the extreme performance and scal-ability helps protect your systems investment.

NCR RealPOS 70XRT

NCR Green - C=69, M=0, Y=100, K=0

NCR Platinum - C=10, M=1, Y=0, K=40

Experience a new world of interaction

NCR RealPOS™ 70XRT

POS Workstation

For more information, visit www.ncr.com, or email retail@ncr.com.

Looking for a POS solution that accelerates your business?

MariaJ Typewritten Text

MariaJ Typewritten Text

MariaJ Typewritten Text

MariaJ Typewritten Text

MariaJ Typewritten Text

MariaJ Typewritten Text

NCR continually improves products as new technologies and components become available. NCR, therefore, reserves the right to change specifications without prior notice.

All features, functions and operations described herein may not be marketed by NCR in all parts of the world. Consult your NCR representative or NCR office for the latest information.

NCR RealPOS is either a registered trademark or trademark of NCR Corporation in the United States and/or other countries. All brand and product names appearing in this document are trademarks, registered trademarks or service marks of their respective holders.

© 2011 NCR Corporation Patents Pending EB5795-0211 www.ncr.com

Key Features

• Fast and reliable capacitive touchscreen interface with high-brightness LCD and full-tilt capability

• Remote management improves system availability

• Energy-efficient chipset, processors and high-efficiency 80 PLUS power supply for reduced power consumption

• Innovative EZ-Glide Blade System provides tool-free front-access for service and upgrades

• Integrated compact design with customizable customer-facing display system

NCR RealPOS 70XRT

NCR Green - C=69, M=0, Y=100, K=0

NCR Platinum - C=10, M=1, Y=0, K=40

Experience a new world of interaction

Technical Specifications

PROCESSOR

• Intel Core™ 2 Duo processor P8400 (1060 MHz FSB)

• Intel Celeron® Dual-Core processor T3100 (800 MHz FSB)

• Intel Celeron® processor 900 (800 MHz FSB)

MOTHERBOARD

• Intel GM45 Express chipset

• Mobile Intel graphics media accelerator (GMA)

4500MHD

• Intel® clear video technology

• Intel matrix storage technology 7.0 with integrated RAID support

MEMORY

• Dual channel DDR2 800MHz memory

• 1GB up to 4GB available (8GB maximum)

• 2 SODIMM memory sockets

• 128MB up to 256MB dynamic video memory technology (DVMT)

STORAGE OPTIONS

• 3.5” 160GB SATA hard disk drive

• Dual 2.5” 160GB SATA hard disk drives

• 2.5” 40GB SATA solid state drive (SSD)

• Integrated slimline CD/DVD ROM drive

CONNECTIVITY

• 12 USB ports total:

- 4 PC USB (5V)

- 2 powered USB (12V)

- 1 powered USB (24V printer)

- 5 dedicated USB ports (reserved)

• 5 RS-232 ports (selectable power 0/5/12V)

• Cash drawer port (dual drawers via optional Y cable)

• 10/100/1000 MB (Gigabit) Ethernet LAN

• VGA Port (dual independent display support)

• Audio ports:

- Front channel line out

- Rear channel line out

- Line in (mic)

• Integrated USB wireless option

CASHIER INTERFACE

• 15” capacitive touchscreen

• 17” capacitive touchscreen

• High-brightness LCD

• Full-tilt capability (0 to 90o)

• Integrated stereo speakers

• Motion sensor

CASHIER INTERFACE OPTIONS

• Integrated 3-track ISO MSR

• Integrated Biometrics, optical fingerprint reader

CONSUMER DISPLAY OPTIONS

• 2 x 20 VFD (integrated or pole mount)

• All Points Addressable (APA) display

• Color LCD: 6.5”, 12” or 15”

• 15” color LCD with capacitive or resistive touchscreen

OPERATING SYSTEMS

• Windows® XP Professional

• Windows Embedded POSReady

• SUSE® Linux® Enterprise for Point-of-Service (SLEPOS)

POWER MANAGEMENT

• 80 PLUS certified power supply (260 watt capacity)

• ACPI 3.0 compliant

• Intel® C-state architecture

SYSTEMS MANAGEMENT

• PXE network boot

• Wake on LAN

• LED dashboard

• Intel Active Management Technology 4.0 (Intel AMT)

• NCR Retail Systems Manager (RSM)

COMPLIANT STANDARDS

• RoHS, WEEE

DIMENSIONS

• Base with 15” touchscreen/no MSR (W x D x H)

- 14.5” x 12.0” x 14.5” (36.8 x 30.5 x 36.8 cm)

Why NCR?

With over 125 years of retail experience, NCR is a leading global provider of assisted- and self-service solutions. We help our clients around the world improve their customer interactions, implement change quickly and proactively, and transform their businesses to become leaders and change agents.

We can help you, too.

DESCRIPTION

Murano glass with frosted or case glass interior. Includes low-voltage, 50 watt halogen bi-pin lamp or 6 watt replaceable LED module and six feet of field-cuttable suspension cable.

INSTALLATION

Socket terminates with FreeJack male connector, which may be installed into a system connector. Elements ordered with a system prefix include a connector for that system. For use on T~TRAK, order FreeJack version and T~TRAK FreeJack Connector (sold separately).

ACCESSORIES & OPTICAL CONTROLS

Swag Hook

WEIGHT

2lb / 0.91kg ± chartreuse amber chartreuse cobalt red white

COLOR OPTIONS

ORDERING INFORMATION

700 SYSTEM FIRF COLOR FINISH LAMP

FJ FREEJACK

KL KABLE LITE

MP MONOPOINT

MO MONORAIL

MO2 TWO-CIRCUIT MONORAIL

A AMBER

H CHARTREUSE

B COBALT

R RED

W WHITE

Z ANTIQUE BRONZE

C CHROME

S SATIN NICKEL

12 VOLT HALOGEN

-LED 12 VOLT LED 3000K

-24 24 VOLT HALOGEN

Note: Note: MP includes 4" Round Flush Canopy.

Antique Bronze is not available for Kable Lite.

When installing LED option on MO2 only magnetic transformers may be used.

7400 Linder Avenue Skokie, Illinois 60077

Tech Lighting, L.L.C.

T 847.410.4400 F 847.410.4500

700 FJ FIRF A S -LED

FIXTURE TYPE:

JOB NAME: B500 Canteen

NOTES:

©2014 Tech Lighting, L.L.C. All Rights Reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C.

Tech Lighting reserves the right to change specifications for product improvements without notification.

L O W - V O L T A G E P E N D A N T S

Firefrost Pendant

Firefrost Pendant | Customizable Spec Sheet http://www.techlighting.com/Products/SpecSheet/28

1 of 1 7/28/2014 2:23 PM

MariaJ Typewritten Text

MariaJ Typewritten Text

RE

IN

FO

RC

ED

W

EL

DE

D W

IR

E

CO

NS

TR

UC

TI

ON

1.800.772.287746

COUNTERTOP WIRE CUP & LID DISPENSING RACKS

Model Item Dimensions Number Description H x W x D

WR-CT-3 3 Section Vertical Dispensing Rack 191⁄4" x 61⁄4" x 20"

WR-CT-4 4 Section Vertical Dispensing Rack 243⁄4" x 61⁄4" x 20"

WR-CT-5 5 Section Vertical Dispensing Rack 293⁄4" x 61⁄4" x 20"

WR-CT-LID 1 Section Optional Lid Insert 31⁄4" x 61⁄8" x 20"

WR-CT-BASE Optional Weighted Base 1⁄2" x 61⁄4" x 181⁄2"

WR-CT SERIES CUP & LID DISPENSING RACKS

These units dispense 6 oz. to 44 oz. paper, plastic or foam cups with rim diameters ranging from 25⁄8" – 43⁄4".

Features the simple and fast EZ-Twist adjustment mechanism. Reinforced welded construction and durable powder coated finish provide long term reliability.

The optional WR-CT-LID insert creates a storage area for lids up to 43⁄8" diameter.

WR-CT-4 shown with optional

WR-CT-LID

WR-CT-3 WR-CT-4 WR-CT-5

WR-CT-BASE The optional WR-CT-BASE is available for WR-CT Series cup dispensing racks.

This weighted base provides additional product stability.

The optional WR-CT-LID insert is available for WR-CT Series cup dispensing racks. This polystyrene lid chute creates a storage area for lids up to 43⁄8" diameter. Multiple inserts can be utilized in a single dispensing rack.

WR-CT-L ID

MAXIMUM DISPENSING IN A MINIMUM AMOUNT OF SPACE

MariaJ Typewritten Text B6 & B7

Stephanie Oval

Stephanie Oval

Stephanie Text Box B7

Stephanie Text Box B6

REINFORCED W

ELDED W

IRE CONSTRUCTION

fax 847.753.964847www.dispense-rite.com

COUNTERTOP WIRE CUP, LID & STRAW DISPENSING RACKS STL

SERIES

Model Item Dimensions Number Description H x W x D

WR-3 3 Sections: (1) 31⁄2"; (1) 41⁄4"; (1) 43⁄4" 81⁄2" x 141⁄2" x 5"

WR-4 4 Sections: (4) 41⁄8" 81⁄2" x 181⁄2" x 5"

WR-5 5 Sections: (1) 31⁄2"; (2) 41⁄4"; (2) 43⁄4" 81⁄2" x 23" x 5"

WR-STAND Optional Angled Stand 11" x 53⁄4" x 15"

WR-STRAW Optional Straw Holder 45⁄8" x 31⁄8"

WR SERIES COUNTERTOP CUP & LID 0RGANIZERS

These versatile wire racks accommodate a variety of cup & lid sizes and offer maximum organization in a minimum amount of counter space. Units are available with three, four and five sections and can be used for either cups or lids.

Organizers may be ordered with the optional WR-STAND and/or WR-STRAW holder shown below.

WR-3

WR-4

WR-5

• Simple organized presentation

• Reinforced welded wire construction

• Durable black powder coated finish

• Optional WR-STAND allows easy access to all compartments

• Optional WR-STRAW unit available

• Maximum dispensing in a minimal amount of space

Key Features

WR-STAND

WR-4 shown with optional WR-STAND and WR-STRAW

The optional WR-STAND elevates WR Series Organizers for easier access to cups, lids and straws.

WR-STRAW

WR-3

3 Sections: (1) 31⁄2"; (1) 41⁄4"; (1) 43⁄4"

WR-4

4 Sections: (4) 41⁄8"

WR-5

5 Sections: (1) 31⁄2"; (2) 41⁄4"; (2) 43⁄4"

Hoshizaki

© HOSHIZAKI AMERICA, INC.

618 Hwy. 74 S., Peachtree City, GA 30269 TEL 1-800-438-6087 FAX 1-800-345-1325 www.hoshizaki.com

CUBER DIMENSIONS

W x D x H

KMD-450M_H

6/11

Item # 13243

MODULAR CRESCENT CUBER

Warranty Valid in United States, Canada, Puerto Rico, & U.S. Territories. Contact factory for warranty in other countries.

Three Year - Parts & Labor on entire machine.

Five Year - Parts & Labor on: Evaporator.

Five Year - Parts on: Compressor, air-cooled condenser coil.

KMD-450M_H

Item #

Project:

Qty:

Hoshizaki reserves the right to change specifications without notice.

KMD-450M_H

30 x 241/4 x 221/8

*AutoCad available on KCL

• Up to 460 lbs. of ice production per 24 hours

• Ice on beverage design

• Durable stainless steel exterior

• Individual crescent cube

• Protected by H-GUARD Plus Antimicrobial Agent

• CycleSaver® Design

• EverCheck® alert system

• Stainless steel evaporator

• Removable air filters (Air-cooled model only)

• Front air inlet panels available for side-by-side application (used with HS-0230 Kit)

• R-404A Refrigerant

• KMD-450MAH - Not recommended for side-by-side application

* The KMD-450MAH is ENERGY STAR qualified.

KMD-450MAH

Air-Cooled

Shown on an optional Lancer 30” Dispenser

KMD-450MWH

Water-Cooled

Also available on Bins:

B-500PF/SF*

*used with separate HS Kit

HS-2129

MariaJ Typewritten Text B8A

Oval

Hoshizaki

DIMENSIONS

W x D x H

© HOSHIZAKI AMERICA, INC.

KMD-450M_H

MODULAR CRESCENT CUBER

UTILITY CONSUMPTION

AIR-COOLED

Model Number

70˚

50˚ 70˚

90˚

80˚

90˚

Ice Production Per Cycle

KWH per

100 LBS.

90/70

Potable

Water Gal.

per 100 lbs.

90/70Lbs. Cubes

A ir

T em p

F.

Water Temp˚ F.

SPECIFICATIONS

Model Number Condenser Amperage Min. Circuit Ampacity

Shipping Weight

5.48 18.9

9.6 432

Condenser

Water Gal.

per 100 lbs.

90/70

N/A

WATER-COOLED

70˚

50˚ 70˚

90˚

80˚

90˚A ir

T em p

F.

Water Temp˚ F.

377415

OPERAT ING L IM ITS

• Ambient Temp Range 45 - 100˚F

• Water Temp Range 45 - 90˚F

• Water Pressure 10 - 113psig

• Voltage Range 104 - 127V

ELECTRICAL & PLUMBING/KMD-450M_H

• 115-120/60/1 (3 wire with neutral for 115V)

• 15 amp Max Fuse/HACR Breaker Size

• 3/8” ODcopper or equivalent independent potable water supply

• 3/4” FPT independent drain connection SERVICE

• Panels easily removed and all components accessible for service.

• Removable/cleanable air filters.

(Air-Cooled model only)

618 Hwy. 74 S., Peachtree City, GA 30269 TEL 1-800-438-6087 FAX 1-800-345-1325 www.hoshizaki.com Printed in U.S.A.

KMD-450M_H

30 x 241/4 x 221/8

KMD-450MAH

4.55 17.89.3 432 126KMD-450MWH

10.0 15A 170 lbs.Air-CooledKMD-450MAH

8.5 15A 170 lbs.Water-CooledKMD-450MWH

• Air-cooled

• Water-cooled

FRONT VIEW (Air-cooled)

SIDE VIEW (Air-cooled)

BOTTOM VIEW (Air-cooled)

BACK VIEW (Air-cooled)

FRONT VIEW (Water-cooled)

SIDE VIEW (Water-cooled)

BOTTOM VIEW (Water-cooled)

BACK VIEW (Water-cooled)

THE COCA-COLA COMPANY 1 GOLD PEAK POST-MIX TEA

Introducing Gold Peak Post-Mix Tea

Coca-Cola Foodservice introduced 3 brands of Gold Peak post-mix tea during the summer of 2007. The three brands are:

Gold Peak Sweetened Black Tea Gold Black Unsweetened Black Tea Gold Peak Sweetened Green Tea

The dispensing requirements for Gold Peak teas are:

Must be dispensed through the new Variety Tea Dispenser, Lancer Tea Urn, or 2 valve non-carb tower

Ambient water and ambient syrup

5.5 to 1 ratio (Note: The ratio for most Nestea brands is 4.5 to 1 when dispensed with ambient water and ambient syrup.)

The Lancer Tea Urn and the Variety Tea Dispenser are the only approved dispensers for Gold Peak teas when the dispenser is placed in view of the consumer. If the dispenser is in the back of the house, any of the three dispensers is authorized.

A Gold Peak wrap has been developed for the Lancer Tea Urn.

When Gold Peak tea is dispensed through the Lancer Urn and the Urn is in view of the consumer, the wrap must be installed on the Urn. The part number for the wrap is CCP# 112357. Labels to identify Sweetened, Unsweetened and Green teas are included with the wrap.

B9

THE COCA-COLA COMPANY 2 GOLD PEAK POST-MIX TEA

VARIETY TEA DISPENSER - Introduction

The Variety Tea Dispenser is a new proprietary dispenser capable of dispensing up to four post-mix BIBs of iced tea from one dispenser. It uses a touch-sensor control system in an easy-to-use interface. The Variety Tea Dispenser offers the operational ease of post-mix dispensing in a state of the art dispenser. It was designed for self-serve environments.

The tower is manufactured by Wunder-Bar and is similar to the Quick Silver tower and the Wunder-Bar bar gun. The flow control components are the same as the Wunder-Bar bar gun.

FEATURES / BENEFITS:

- Four still, ambient beverages in small footprint

- Unit can be easily modified to dispense less than four beverages in field

- Easy-to-use touch-sensor control panel

- Operational ease of BIB dispensing

- Drip tray is dishwasher safe. Optional drain kit.

- Continuous pour operation

- Finished beverages dispensed at ambient temperature

- Traditional Tea Urn appearance

- Optional Sold Out Kit

TECHNICAL SPECIFICATIONS:

Dispense Flow Rate 2.0 oz / sec Ratio Range 4:1 – 6:1 Water Requirements 25 – 125 psi (dynamic) Dispensing Requirements

Ambient Water / Ambient Syrup

Electrical Requirements 120 VAC Agency Approvals UL, NSF Dispenser Weight 25 lbs Drip Tray 26 oz capacity, dishwasher safe

Easily removable for cleaning (if drain not attached) Plumbed Drain Optional Number of Brands Unit comes set up with 4 brands. It can be modified during installation to dispense only 2 or 3 brands. *New brand ID card required Secure to Counter Must be secured to counter (bolts & nuts, silicone)

THE COCA-COLA COMPANY 3 GOLD PEAK POST-MIX TEA

1200-UP series LOW TeMPerATUre

HOT HOLDiNG CABiNeTs l HALO HEAT…a controlled, uniform heat source that gently surrounds food for better appearance, taste, and longer holding life.

l Holds hot food hot...meat, poultry, fish, potatoes, casseroles, vegetables, rolls, etc.

l Dual purpose — both a holding cabinet and dough proofer.

l Universal rack design accommodates standard full-size (gastronorm) pans or full-size sheet pans.

l Can be converted with side racks to accommodate shelves for full size gastronorm pans or full size sheet pans.

l Stainless steel interior resists corrosion.

l Casters provide easy mobility.

l Antimicrobial handle retards the growth of illness-causing pathogens.

l Digital control senses temperature drops faster, providing quick heat recovery time.

l Door venting holds crispy food better.

Two (2) individually controlled oven compartments are enclosed in one 20 gauge stainless steel exterior and doors.

Each controlled compartment has one (1) Simple Control with ON/OFF power switch; Up and Down Arrow Keys with a temperature range of 60° to 200°F (16° to 93°C); indicator light, and digital display. Each compartment is equipped with two (2) universal side rails and four (4) sets of chrome plated pan slides designed to accommodate standard full-size pans. Pan supports are adjustable in sixteen (16) positions on 1-3/4" (44mm) centers, and one (1) set of 5" (127mm) heavy duty casters – 2 rigid and 2 swivel with brake.

MODEL 1200-UP Double compartment holding cabinet

#39 - 11/12

ITEM NO. _______________________

W164 n9221 Water street • p.o. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • u.s.a.

PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY www.alto-shaam.com D U E T O O N G O I N G P R O D U C T I M P R O V E M E N T , S P E C I F I C A T I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E .P R I N T E D I N U . S . A .

Factory installed options

• Electrical Choices ➥ Specify Voltage:

208-240 (2000W) 208-240 (4000W) 230 (2000W) 230 (4000W)

• Cabinet Choices ➥ Specify Cabinet:

Reach-In, standard Pass-Through, optional

• Door Choices ➥ Specify Door:

Solid Door, standard Window Door, optional

➥ Specify Door Swing:

Right-hand swing, standard Left-hand swing, optional

Note: Pass-through cabinets cannot have all doors hinged on the same side.

• Side Rack Model As an alternative to universal pan slides, this unit can be ordered as a “side rack” model which is equipped with two (2) side racks and three (3) chrome plated wire shelves. It will accommodate full and half size US hotel and European gastronorm pans on the side racks, or sheet pans on shelves.

additional Features deluxe control option Solid state electronic control option simplifies temperature setting and has a clear, easy-to-read LED display and includes our patented SureTemp™ heat recovery system. SureTemp™ reacts immediately to compensate for any loss of heat whenever the door is opened.

Deluxe control is also available with six independent multiple timers for each compartment to facilitate “first-in, first-out” concept.

Deluxe control with internal temperature probe.

shown with universal angles

ANSI/NSF 4

IP X4

MariaJ Typewritten Text

CC2

-1

/2

(8 m m

-1

/4

(1

7m m

27-5/8" (701mm)

Shown with optional bumper

Electrical Connection

25-13/16" (655mm)

25-1/16" (636mm)

26-1/2" (672mm)

23-1/16" (585mm)

-3

/8

(1

8m m

-1

3/

(1

4m m w ith

(1 m m ca st er s* 6-

/1

6"

2m m

24-1/8" (613mm)

33-13/16" (858mm) 16-7/8" (429mm)

Electrical Connection

Pass-Through Option

*74-1/16" (1881mm) - with optional 3-1/2" (89mm) casters *75-5/8" (1921mm) - with optional 6" (152mm) legs

-1

/4

(1

7m m

-1

5/

(1

9m m

Electrical Connection

Pass-Through Option

32-3/16" (817mm)

Cord Length:

120V - 9' (2743mm) 208-240V - 8' (2438mm) 230V - 8' (2438mm)

1200-UP series LOW TeMPerATUre HOT HOLDiNG CABiNeTs

#39 - 11/12

W164 n9221 Water street • p.o. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • u.s.a.

PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY www.alto-shaam.com D U E T O O N G O I N G P R O D U C T I M P R O V E M E N T , S P E C I F I C A T I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E . P R I N T E D I N U . S . A .

weight net: 333 lb (151g) ship: (est.) 393 lb (178 kg) carton dimensions: (l x w x h)

35" x 35" x 82" (889mm x 889mm x 2083mm) product\pan capacity (p e r c o m p a r t m e n t) 192 lbs (87kg) maximum • volume maximum: 120 quarts (152 liters) pan slides (2 per set) - 1-3/4 (44mm) centers pan size Four (4) sets of pan slides provided

Maximum capacity with additional pan slides full size: 20" x 12" x 2-1/2" GN1/1: 530mm x 325mm x 65mm

Eight (8) pans - 2 per set of slides

Sixteen (16) pans - with 4 additional sets of pan slides full size: 20" x 12" x 4" GN1/1: 530mm x 325mm x 100mm

Eight (8) pans - 2 per set of slides no additional capacity full size: 20" x 12" x 6" 530mm x 325mm x 150mm

Eight (8) pans - 2 per set of slides no additional capacity full size sheet pans: 18" x 26" x 1" Four (4) pans - 1 per set of slides

Sixteen (16) pans - with 12 additional sets of pan slides side racks and shelves pan size three (3) shelves provided Maximum capacity with additional shelves full size: 20" x 12" x 2-1/2" GN1/1: 530mm x 325mm x 65mm

Sixteen (16) pans - 2 per side rack no additional capacity full size: 20" x 12" x 4" GN1/1: 530mm x 325mm x 100mm

Eight (8) pans - 2 per side rack no additional capacity full size: 20" x 12" x 6" GN1/1: 530mm x 325mm x 150mm

Eight (8) pans - 2 per side rack no additional capacity full size sheet pans: 18" x 26" x 1" Three (3) pans - 1 per shelf

Eight (8) pans with 5 additional shelves optionS & acceSSorieS

Bumper, Full Perimeter 5012932 Casters, 3-1/2" (76mm) - 2 rigid, 2 swivel w/ brake 5008017 Door Lock with Key (each handle) LK-22567 Handle Kit, Push/Pull (set of four) 55662 Legs, 6" (152mm), Flanged (set of four) 5011149 Pan Grid, Chrome Plated, Wire PN-2115 pan insert 18" x 26" (457mm x 660mm x 25mm)

Drip Pan with Drain 1-11/16" (43mm) 5014448 Security Panel with Lock 5013936 Shelf, Stainless Steel SH-23738 Shelf, Chrome Plated SH-2733 Universal Pan Slides, Chrome Plated sr-24447 Universal Pan Slides, Stainless Steel SR-24762 Water Reservoir Pan (for proofing) 1775 Water Reservoir Pan Cover 1774 clearance reQuireMentS back: 3" (76mm) top: 2" (51mm) sides: 1" (25mm) inStallation reQuireMentS

— Oven must be installed level.

— The oven must not be installed in any area where it may be affected by steam, grease, dripping water, extreme temperatures, or any other severely adverse conditions.

— Appliances with casters and no cord or plug must be secured to the building structure with a flexible connector.

not factory supplied.

diMenSionS: H x W x D exterior: 75-13/16" x 25-1/16" x 32-3/16"

(1924mm x 636mm x 817mm) pass-through: 75-13/16" x 25-13/16" x 33-13/16"

(1924mm x 655mm x 858mm) interior each compartment:

28-3/4" x 21-5/16" x 26-1/2" (730mm x 541mm x 673mm)

W

W electrical voltage phase cycle/hz amps kw cord & plug

120 1 60 16.0 1.9 nema 5-20p, 20a-125v plug

208 1 60 7.0 1.4 nema 6-15p, 240 1 60 8.0 1.9 15a-250v plug (usa only) 208 1 60 14.0 2.9 no cord 240 1 60 16.0 3.8 or plug

230 2000W 1 50/60 7.7 1.8 cee 7/7, 230 4000W 1 50/60 15.4 3.5 220-230v plug

© 2006 Henny Penny Corporation, Eaton, OH 45320 USA Revised 01/10/08

Rotisserie mobile stand

PROJECT QUANTITY ITEM NO

Standard Features

• Sturdy, welded stainless steel frame construction.

• Four heavy-duty casters; two locking.

• Convenient lower storage shelf.

Henny Penny Corporation PO Box 60 Eaton OH 45320 USA

+1 937 456.8400 800 417.8417 +1 937 456.8434 Fax 800 417.8434 Fax www.hennypenny.com

APPROVED APPROVED AS NOTED RESUBMIT

AUTHORIZED SIGNATURE DATE

MODEL SCT-800

Bidding Specifications

• Provide Henny Penny rotisserie work table model SCT-800 and mobile stand for SCR-6 or SCR-8 countertop rotisserie.

• Unit shall be constructed of welded stainless steel and shall consist of a top surface and lower storage surface.

• Unit shall include (4) 5-inch heavy duty casters, two locking.

General Information This sturdy work table is designed specifically as a base for mounting the Henny Penny SCR-6 or SCR-8 countertop Rotisseries when built-in countertops are not available.

Henny Penny mobile rotisserie stands provide foodservice operators a safe, sanitary surface to place rotisseries while making it easy to relocate them at any time.

Rotisserie work table/mobile stand, model SCT-800.

Dimensions Height: 35 5/8 in. (905 mm) Width: 40 in. (1018 mm) Depth: 34 in. (864 mm)

Floor space: 10 sq. ft. (1m3)

Crated dimensions: Contact Henny Penny

Net weight: N/A Crated weight: Contact Henny Penny

35 5/8 in.

(905 mm)

34 in. (864 mm) 40 in. (1018 mm)

Continuing product improvement may subject specifications to change without notice.

Laboratory certifications

FRONT SIDE

MariaJ Typewritten Text

CR1E

MariaJ Typewritten Text

Standard Features

• High quality stainless steel construction, exterior and interior.

• THERMA-VEC® Even Heat

Process cooks full loads quickly and evenly:

Gentle, cross-flow convection for even cooking throughout the cabinet.

Radiant heat for uniform browning and crisp texture.

• Digital electronic controls with 9 programmable cook cycles.

• Programmable browning and texture control.

• Large LED display for simultaneous time and temperature.

• Food temperature probe.

• Spit rotation switch for easy loading.

• Tempered clear glass doors with black matrix shaded borders.

• Auto-stop rotation when doors open.

• Interchangeable spits, racks and baskets.

• Simple three-piece drive tube and rotor assembly.

• Drive assembly, drip trays and drain pans are easily disassembled for quick cleanup.

• Easy-to-clean coated parts available for additional charge.

Options Curved tempered glass outer door, customer side

Lamp guards Coated parts

© 2006 Henny Penny Corporation, Eaton, OH 45320 USA Revised 11/27/07

Rotisserie Countertop electric

PROJECT QUANTITY ITEM NO

General Information Henny Penny rotisseries are known for turning out full loads of consistently delicious rotisserie items day after day, all day long.

What makes Henny Penny different? You’ll get more of those delicious whole birds, ribs, pork roasts and other center-of-the plate items every day because the Henny Penny rotisserie simply cooks faster.

Patented THERMA-VEC® Even Heat Process combines cross-flow convection cooking with radiant heat. The result is thorough, even cooking with uniform browning in a lot less time than other rotisseries.

The single cabinet SCR-6 six-spit countertop rotisserie saves on floor space while…