Attachment D-1.pdf

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

FULLY SPRINKLERED

VA NORTHERN

INDIANA

HEALTH CARE

SYSTEM

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD

A/E:

STAMPCONSULTANT

321 4 5 6 7 8 9 10

C H A M P L I N A R C H I T E C T U R E

720 East Pete Rose Way Suite 140 Cincinnati OH 45202 513-241-4474 www.thinkchamplin.com

#610-19-103

Marion, IN

REMODEL 1ST FLOOR, BUILDING 138

03/20/2023

FINAL BID DOCUMENTS

138NOT FOR CONSTRUCTION

Page Number

C U s e rs \b w e tz e l\ D o c u m e n ts \M a ri o n

V A

M C

A rc h

R b ri a n n a .w e tz e l.

rv t

/1

/2

:5

:4

A

M

AQ103

FURNITURE, FIXTURE AND EQUIPMENT

SCHEDULE

MM BFW

E - EQUIPMENT SCHEDULE

JSN NAME

FURNISH

/ INSTALL DESCRIPTION

<varies>

A1014 TELEPHONE, WALL MOUNTED, 1

LINE, WITH SPEAKER

VV Telephone, wall mounted, 1 line, with speaker.

A1015 TELEPHONE, DESK, MULTIPLE

LINE

VV Telephone, desk, multiple line.

A1067 MIRROR, FLOAT GLASS, ADA

ACCESSIBLE

CC A high quality 1/4" polished float glass mirror with a stainless steel frame. Frame holds mirror in a tilted position for accessibility and compliance with ADA requirements. Mirror has a galvanized steel back secured to frame with concealed screws with integral horizontal hanging brackets. Mirror shall be approximately 18" wide and 36" high. Other sizes are available.

A5075 DISPENSER, SOAP, DISPOSABLE VV Disposable soap dispenser. One-handed dispensing operation. Designed to accommodate disposable soap cartridge and valve.

A5076 DISPENSER, HAND SANTIZER,

FREE STANDING

VV A free standing hand sanitizer dispenser. For use throughout a healthcare facility. Unit does not include the sanitizing liquid. Units are battery operated.

A5077 DISPENSER, HAND SANTIZER,

FREE STANDING

VV A free standing hand sanitizer dispenser. For use throughout a healthcare facility. Unit does not include the sanitizing liquid. Units are battery operated.

A5080 DISPENSER, PAPER TOWEL, SS,

SURFACE MOUNTED

CC A surface mounted, satin finish stainless steel, single-fold, paper towel dispenser. Dispenser features: tumbler lock; front hinged at bottom; and refill indicator slot. Minimum capacity 400 single-fold paper towels. For general purpose use throughout the facility.

A5082 DISPENSER, PAPER TOWEL,

SENSOR, HANDS FREE

CC A surface mounted, sensor activated, automatic, roll paper towel dispenser. The unit dispenses a paper towel automatically only when hands are place in position below the dispenser for maximum sanitation and hygiene. May include adjustable settings for sheet length, time delay, and sensor range. Unit is battery operated or with optional AC power adapter.

A5090 DISPOSAL, SANITARY NAPKINS VV A surface mounted, satin finish stainless steel, sanitary napkin disposal. Disposal features a flip-up cover, secured to the container by a heavy duty stainless steel piano-hinge. Disposal may be secured to wall or toilet partition. For general purpose use in female toilet stalls or rooms and uni-sex toilet rooms.

A5106 DISPOSAL, SHARPS W/ GLOVE

DISPENSER

VV The unit is designed for the disposal of sharps and complies with OSHA guidelines for the handling of sharps. It shall house a 5 quart container and be capable of being mounted on a wall. It shall have a glove dispenser attached. The unit shall be secured by a locked enclosure.

A5107 DISPENSER, GLOVE,

SURGICAL/EXAMINATION, WALL

MOUNTED

VV Examination glove dispenser box for wall mounting. Fabricated of either cold rolled steel with a white baked enamel finish, plastic or acrylic. Provided with wall bracket to facilitate mounting and demounting.

A5109 <varies> <varies> <varies>

A5135 SHELF,UTLITY, W/ MOP/BROOM

HOLDER

VV A surface mounted, satin finish stainless steel, utility shelf with a maximum of 6 mop/broom holders and 5 rag hooks. Utility shelf features: 8" deep shelf; mounting brackets welded to shelf; spring activated rubber cam holders; and drying rod. Unit is available in various widths 30" (minimum, 3 holders and 2 hooks) to 48" (maximum, 6 holders and 5 hooks). For use in janitor closets. Pricing based on a 36" width.

A5145 HOOK, GARMENT, DOUBLE, SS,

SURFACE MOUNTED

CC A surface mounted, satin finish stainless steel, double garment hook. Equipped with a concealed mounting bracket that is secured to a concealed wall plate. For general purpose use throughout the facility to hang various items of apparel.

A5200 DISPENSER, TOILET TISSUE, SS,

2-ROLL, SURFACE MOUNTED

CC A concealed surface mounted, double roll, satin finish stainless steel, toilet tissue dispenser. Unit accommodates two standard-core toilet tissue rolls through 5" in diameter. Spindles are chrome plated plastic with a heavy-duty internal spring and turn freely for non-controlled delivery. For general purpose use in restrooms.

A6025 MIRROR, SAFETY, CONVEX CC Shall be an 18 inch convex circular mirror. It shall provide a 160-degree wide-field viewing area. The mirror shall be made of shatterproof acrylic or unbreakable polycarbonate. Shall come with mounting bracket.

A6046 ARTWORK, DECORATIVE, WITH

FRAME

VV This JSN is to be used to for determining and defining location of decorative artwork

C02D0 CABINET, U/C/B, 4 DRAWER CC ADA height under counter base cabinet with full width drawers, 3 box drawers over deep drawer. 18" W For general purpose use throughout the facility.

C02D1 CABINET, U/C/B, 4 DRAWER CC ADA height under counter base cabinet with full width drawers, 3 box drawers over deep drawer. 21" W For general purpose use throughout the facility.

C09F1 CABINET, U/C/B, 2 HALF

DRAWER, 2 DOOR

CC ADA height with two half width drawers above solid hinged doors.

C09FO CABINET, U/C/B, 2 HALF

DRAWER, 2 DOOR

CC Sitting height under counter base cabinet, 34.5" H x various widths x 24" D with two half width drawers above solid hinged doors. Also referred to as a combination cabinet or drawer and cupboard cabinet. For general purpose use throughout the facility.

C0041 REMOVABLE SINK APRON, PL-1 CC Apron rail. Also referred to as an apron front, apron panel, or knee space rail. Used to close in front knee space area and/or provide work surface support between two base cabinets or a base cabinet and wall. Apron rails should be ordered in pairs to provide both front and rear work surface support.

CD041 CABINET, ST. ST., SLOPING TOP CC Wall hung stainless steel cabinet with adjustable shelves, open, and sloping top. Also referred to as a stainless steel open wall case.

CE030 CABINET, W/H, 2 SH, 2 GDO,

SLOPING TOP

CC Wall hung cabinet with two adjustable shelves, framed-glass hinged doors, and sloping top. Also referred to as a framed-glass hinged double door wall case. For general purpose use throughout the facility.

CE031 CABINET, W/H, 2 SH, 2 GDO,

SLOPING TOP

CC Wall hung cabinet with two adjustable shelves, framed-glass hinged doors, and sloping top. Also referred to as a framed-glass hinged double door wall case. For general purpose use throughout the facility.

CE040 CABINET, W/H, 2 SH, 2 GDO,

SLOPING TOP

CC Wall hung cabinet with two adjustable shelves, framed-glass hinged doors, and sloping top. Also referred to as a framed-glass hinged double door wall case. For general purpose use throughout the facility.

CE040A CABINET, SLOPING TOP, CC Sloped top for wall-hung cabinets

CE041 CABINET, W/H, 2 SH, FRIDGE 24"

DEPTH

CC Wall hung cabinet with two adjustable shelves, framed-glass hinged doors, and sloping top. Also referred to as above-refrigerator wall cabinet

CS150 SINK, StSt, SINGLE

COMPARTMENT

CC Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.

CS151 SINK, SOLID SURFACE,

INTEGRAL TO COUNTER

CC Solid surface integral sink, (approximate bowl size 7"x15"x10") with: faucet holes on 4" centers; gooseneck spout; wrist blade handles;

and grid strainer. It shall be suitable for use in clinics, offices, washrooms or patient care area. (Non-standard JSN number)

CT030 COUNTERTOP, SOLID SURFACE CC A solid, nonporous countertop with a smooth seamless appearance. Easy to clean and maintain and with proper cleaning does not support the growth of mold. An acrylic-based solid surface product. Standard thickness of 1", and a 4" butt backsplash/curb. Also referred to as a work surface or work top. Available in a choice of colors and depths. Used in lab and other hospital areas requiring optimum physical and chemical resisting properties.

E0042 WORKCENTER, COMPUTER,

FREE STANDING

VV THIS TYPICAL INCLUDES: 1 Tool Rail, 2 Paper Tray, 1 Diagonal Tray, 1 Freestanding Work Surface, 1 Mobile Pedestal, Box/File, 1 Adjustable Keyboard Tray, 60" Length.

E0043 WORKCENTER, COMPUTER,

FREE STANDING, TRANSACTION

TOP

VV THIS TYPICAL INCLUDES: 1 Tool Rail, 2 Paper Tray, 1 Diagonal Tray, 1 Freestanding Work Surface, 1 Mobile Pedestal, Box/File, 1 Adjustable Keyboard Tray, 60" Length with 12" depth transaction top. (NON-JSN)

E0044 WORK SURFACE, 24" X 48" CC 1 Freestanding Work Surface, 48" Length. (NON-JSN)

E0063 WORKSTATION, L-SHAPED,

FREE STANDING 66"x72"

VV THIS TYPICAL INCLUDES: 3 Vertical Hanging Strips, 2 Lockable Flipper Units, 2 Shelves, Storage/Display, 2 Lights, 1 Tackboard, 2 Tool Rails, 2 Paper Trays, 1 Diagonal Tray, 1 Cantilevered Work Surface, 1 Peninsula Work Surface, 1 Adjustable Keyboard Tray, 1 Mobile Pedestal, Box/File, 1 Pencil Drawer, 1 Cpu Holder

E0090 WORKSTATION, L-SHAPED,

FREE STANDING 72" X 72"

VV THIS TYPICAL INCLUDES: 4 Standard Solid Panels; 2 Panel-to-Panel Connectors; 1 Panel Connector, 2-Way Corner; 2 Finished End Hardware; 2 Lockable Flipper Units; 2 Shelves, Storage/Display; 3 Lights; 3 Tackboards; 2 Cantilevered Work Surfaces; 1 Adjustable Keyboard Tray; 1 Mobile Pedestal, Box/File; 1 Pencil Drawer; 2 Support Panels

E0210 WORKSURFACE, W/ OVERHEAD

CAB, WALL MOUNTED

VV THIS TYPICAL INCLUDES: 2 Vertical Hanging Strips; 1 Lockable Flipper Unit; 1 Shelf, Storage/Display; 1 Light; 1 Cantilevered Work Surface

E0418 WORK SURFACE, TEAMLET

AREA

VV Nurse station typicals have non-powered steel frames with a pre-installed metal junction box for user defined electrical solutions. Data modules and low voltage cabling can be routed freely within the frame. Electrical and/or data devices are not provided with the nurse station. Panel inserts are available in fabric, painted metal, tackable, acoustical, paper management, rail, glass, open and electrical/data accessible styles. Typicals include panel inserts for both sides of the steel frame. All electrical connections must be made by an electrical contractor.

E0945 CART, COMPUTER, MOBILE VV A mobile computer cart for use throughout the facility. The cart dimensions will be approximately 45" H x 30" W x 22" D with casters.

May include drawers and miscellaneous other accessories that will be determined at time of purchase.

This Typical may include: 1 Cart Body, w/Computer Support, Style-A Narrow, w/Raised Edge Top; 1 Flip-Up Shelf; 1 Sharps Container Holder; 1 Wastebasket; 1 Chart Holder; 2 Drawers, 3"H; 2 Drawers, 6"H; 3 Accessory Rail, Side; Drawer Organizer Bins

E0948 CART, GENERAL STORAGE,

MOBILE 42"H x 32"W x 22"D

VV THIS TYPICAL INCLUDES: 1 Cart Body, Style-A Narrow, w/Raised Edge Top; 2 Drawers, 3" H, 4 Drawers, 6" H; 1 Accessory Rail, Side; Drawer Organizer Bins

E0954 CART, EMERGENCY, MOBILE,

66"H x 32"W x 22"D

VV THIS TYPICAL INCLUDES: 1 Cart body, style-A narrow, w/raised edge top; 1 Accessory rail, side; 1 Accessory rail, back; 1 Defibrillator tray; 1 IV pole; 1 Breakaway bar; 1 Flip-up shelf; 1 Wastebasket; 1 Oxygen tank holder; 1 Electrical box-4 outlet; 1 Cord wrap; 4 Drawer, 3"H; 3 Drawer, 6"H ; Drawer organizer bins.

E1000 FRONT LOBBY DESK,

FURNITURE SYSTEMS

VV Front desk to be furniture system panels, work surfaces, transaction counters, drawer pedestals and pencil drawers. Exact configeration to be approved by VAMC.

F0110 OFFICE BOOKCASE, 12"D X 33"W

X 78"H

VV Bookcase, sectional, each section 33" x 13" x 75"h, (825mm x 325mm x 1875mm) with 10" (250mm) base

F0120 OFFICE BOOKCASE, 12"D X 33"W

X 78"H

VV Bookcase, sectional, each section 33" x 13" x 75"h, (825mm x 325mm x 1875mm) with 10" (250mm) base

E - EQUIPMENT SCHEDULE

JSN NAME

FURNISH

/ INSTALL DESCRIPTION

F0205 CHAIR, SIDE WITH ARMS VV Upholstered side chair, 32" high X 21" wide X 23" deep with arms, padded seats and padded backs. Seat height is a minimum of 17".

Available with or without sled base.

F0206 CHAIR, SIDE, BARIATRIC, WITH

ARMS

VV A bariatric side chair with arms for use in a waiting room, lobby or other patient area. Chair will have a padded seat and back and have a capacity of 800 pounds.

F0210 CHAIR, SIDE, WITHOUT ARMS VV Upholstered side chair, 32" high X 21" wide X 23" deep with floor glides. Seat is non-tilting and without arms.

F0225 CHAIR, DINING ROOM VV Dining room chair with glides. Chair has straight legs with cushioned cloth or vinyl seat.

F0275 CHAIR, SWIVEL, HIGH BACK VV Highback contemporary swivel chair, 41" high X 23" wide X 23" deep with five (5) caster swivel base and arms. Chair may be used at desks or in conference rooms. Back and seat are foam padded and upholstered with either woven textile fabric or vinyl.

F0280 CHAIR, SWIVEL, LOW BACK VV Low back contemporary swivel chair, 37" high X 25" wide X 31" deep with a five (5) caster swivel base, arms and foam padded seat and back upholstered with either woven textile fabric or vinyl.

F0305 CHAIR, WAITING ROOM, SINGLE VV Single seat waiting room chair with foam padded seat and back. Upholstered with either woven fabric textile or vinyl. Arms and floor glides included.

F0340 STOOL, SELF ADJUSTING VV Self adjusting stool. Consists of a foam padded upholstered seat with attached foot rest for added comfort. Mounted on swivel casters.

Designed for doctor's use during examinations.

F0420 CABINET, FILING, LATERAL,

HALF HEIGHT

VV Half height two (2) or three (3) drawer lateral filing cabinet, 28" high X 42" wide X 18" deep with recessed handles, locking device and drawer label holders. Drawers are adaptable to either letter or legal size materials.

F0500 CART, HOUSEKEEPING

SUPPLIES

VV Cart, housekeeping supplies, 24" x 48" (600mm x 1200mm)

F0740 TABLE, OCCASIONAL, LAMP VV Occasional lamp table (end table) approximately 20" high X 27" wide X 27" deep with choice of finishes (wood, oak veneer, or high pressure laminate).

F0795 TABLE, DINING VV Dining table. Round 42" diameter or square 42" X 42". Used in dining facilities and can comfortably seat up to four (4) persons.

F2000 BASKET, WASTEPAPER, ROUND,

METAL

VV Round wastepaper basket, approximately 18" high X 16" diameter. This metal unit is used to collect and temporarily store small quantities of paper refuse in patient rooms, administrative areas and nursing stations.

F2010 BASKET, WASTEPAPER,

STEP-ON

VV "Step-on" wastepaper basket with inner liner and foot petal activated flip top.

F2020 CAN, TRASH, 44 GALLON VV A surface mounted, satin finish stainless steel, utility shelf with a maximum of 6 mop/broom holders and 5 rag hooks. Utility shelf features: 8" deep shelf; mounting brackets welded to shelf; spring activated rubber cam holders; and drying rod. Unit is available in various widths 30" (minimum, 3 holders and 2 hooks) to 48" (maximum, 6 holders and 5 hooks). For use in janitor closets. Pricing based on a 36" width.

F2300 RACK, MAGAZINE, WALL

MOUNTED

VV Wall mounted magazine rack with nine (9) magazine holding compartments.

F2310 RACK, PAMPHLET, WALL

MOUNTED

VV Wall mounted pamphlet rack up to 12 (twelve) pamphlet holding pockets. Unit is used to store and display educational pamphlets.

F2540 SHREDDER, PAPER, SECURITY VV Paper shredder, approximately 21" high X 15" wide X 12" deep with shredding unit and waste receptacle. Security features will include cross-cut shredding.

F3050 WHITEBOARD, DRY ERASE VV Whiteboard unit, approximately 36" H x 48" W consisting of a white porcelain enamel writing surface with an attached chalk tray.

Magnetic surface available. Image can be easily removed with a standard chalkboard eraser. For use with water color pens. Unit is ready to hang.

F3065 WHITEBOARD/BULLETIN BOARD,

COMBINATION

VV A combination whiteboard and bulletin board, half LCS and half cork. Available with either aluminum or wood frame. It can be used in patient rooms or in any appropriate space in the facility.

F3200 CLOCK, BATTERY, 12" DIAMETER VV Clock, 12" diameter. Round surface, easy to read numbers with sweep second hand. Wall mounted unit for use when impractical to install a fully synchronized clock system. Battery operated, (batteries not included).

FLAG FLAG, POLE MOUNTED ON BASE VV US FLAG, POLE MOUNTED, SUPPORTED ON WEIGHTED BASE

G9003 CHECK-IN KIOSK EX EXISTING TO REMAIN

G9006 DISPENSER, PAPER CUP, WALL

MOUNTED

VV The unit is designed for the disposal of sharps and complies with OSHA guidelines for the handling of sharps. It shall house a 5 quart container and be capable of being mounted on a wall. It shall have a glove dispenser attached. The unit shall be secured by a locked enclosure.

K1552 BREWER, COFFEE, AUTO,

ELECT, 3 BURNER, FRONT/BACK

VV Space saving front to back automatic coffee maker. This unit includes a heating tank, connection for a cold water supply, decanter service with three burners, funnel and a water flow controller. The unit is used for semi-automatic coffee brewing in cafeterias and commercial institutions. The unit automatically shuts off the water flow when enough has passed through to fill the pot. The unit is normally provided plumbed with a hot water faucet to the side for making other hot drinks (tea, cider, cocoa, etc.). The database height dimension does not include the clearance for coffee decanters warming on the upper burners.

K4665 OVEN, MICROWAVE, CONSUMER VV Counter mounted microwave oven for average duty use. The exterior cabinet can be metal or heavy duty impact resistant plastic. The oven delivers instant energy for rapid heating, defrosting or prime cooking. The oven has touch pad controls, digital timer, power level selector and preprogrammed selectors for commonly cooked items. This oven is commonly found in staff lounges.

M0512 TELEVISION, HDTV, LARGE

SCREEN 60"

VV A high definition (HDTV) multimedia, slim design, 60"W to 65"W color television. The TV will have a 16.9 wide screen aspect ratio with full HD 1080p resolution and HDMI connections. TV may be LED, Plasma or LCD. TV will include a stand.

M1605 HOLDER, CHART, 20 EACH VV Clinical chart holder cart. 20 chart capacity. 2 side-by-side tiers. May be ordered in various chart capacities. Constructed of heavy metal frames with vinyl laminated surfaces or painted panels. 3" casters with locks. Used to hold patient spring loaded charts.

M1801 COMPUTER,

MICROPROCESSING, WITH FLAT

PANEL MONITOR

VV Desk top microprocessing computer. The unit shall consist of a central processing mini tower, flat panel monitor, keyboard, mouse and speakers. The system shall have the following minimum characteristics: a 2.8 GHz Pentium processor; 512 MB memory; 80GB hard drive; 32/48x CD-ROMDVD combo; 1.44MB network interface card; video 32 MB NVIDIA; a 18 inch flat panel monitor. The computer is used throughout the facility to input, manipulate and retrieve information.

M1802 WORK STATION, COMPUTER,

RETRACTABLE, WALL MOUNTED

VV A wall mounted retractable work station. Work station is used as a computer station in treatment rooms, exam rooms and areas where physical space in limited.

M1820 IMPRINTER, DATA RECORD,

ELECTRIC

VV Vacuum pressure regulator for connection to central piped vacuum system. Standard display scale is graduated at least from 0 to 200 mm Hg of vacuum. Displays on specialized regulators may cover other vacuum ranges. Regulator type (continuous, intermittent, continuous/intermittent, surgical, pediatric, thoracic, etc.) as required. To be used in delivery, neonatal, pediatrics or any area where suction is required. Database pricing reflects continuous regulators graduated to 200 mm Hg with a full line vacuum selection switch and DISS configured inlets and outlets.

M1825 PRINTER, DESKTOP VV High resolution computer printer with a variety of type styles and sheet/envelope feeder trays. Database information reflects network ready, medium duty office style laser printers. Other types of printers (bubble jet, dot matrix, line or plotter) as well as light or heavy use capabilities are available.

M1840 PRINTER/COPIER/FAX

COMBINATION

VV Multifunctional printer, fax, scanner and copier (PFC) all-in-one machine.

M2055 SHELVING, STORAGE, WIRE,

CRS, WITH ADJUSTABLE

SHELVES

VV Stationary, wire, shelving unit. Unit has fully adjustable shelves constructed of stainless steel. For use in general purpose storage areas. Shelving is provided in various sizes and configurations. Price provided is for a unit approximately 74"H x 18"D x 48"W with four shelves.

M2600 VACUUM CLEANER, BATTERY

POWERED

VV Vacuum cleaner, battery powered, rechargable

M2650 MACHINE SCRUBBIING, FLOOR VV Machine, scrubbing, floor, battery powered, rechargable

M2651 MACHINE, SCRUBBING, WALL VV Machine, scrubbing, wall, battery powered, rechargable

M3070 HAMPER, LINEN, MOBILE W/ LID VV Mobile linen hamper with hand or foot operated lid. Made of heavy tubular stainless steel with heavy gauge welded steel platform.

Holds 25" hamper bags. Mounted on ball bearing casters. For linen transport in hospitals and clinics.

M3072 FRAME, INFECTIOUS WASTE

BAG WITH LID

VV Frame for an infectious waste collection bag. Made of heavy tubular stainless steel with heavy gauge welded steel platform. Adjust to hold 18" or 25" trash bags. Mounted on ball bearing casters and includes permanently mounted hinged lid. Provides means

M3073 CONTAINER, BIOHAZARD

WASTE, STEP-ON, FIRE SAFE

VV A biohazard waste container with a step-on lid. The container will have a capacity of approximately 12 gallons and be made of a fire safe material.

M3150 DISTRIBUTION SYSTEM,

MEDICATION, AUTOMATIC

VV An automated dispensing system that provides controlled dispensing, inventory and security. Size and cost will vary dependent on number of modules selected.

M4040 SCALE, WEIGHING, 300 POUND

CAPACITY

VV Person weighing scale with 300 pound capacity. Unit consists of a rugged base frame of 3/32" thick steel with a non-slip surface and a speedometer dial with ultra sensitive registering mechanisms. Scale is designed for medical use.

M4100 SPHYGMOMANOMETER,

ANEROID, WALL MOUNTED

VV Aneroid sphygmomanometer. Unit is wall mounted and has large graphic dial display for easy reading from all angles. It has a 90 degree (angle) swivel and 10 degree (angle) forward tilt to reduce glare. Unit accuracy is within 1% of reading. Sturdy impact-resistant construction.

M4101 WELCH ALLYN BOARD VV Welch Allyn Backboard with components to be determined by PACT personel.

M4102 WELCH ALLYN COMPONENT VV Welch Allyn CIWS - Tip Dispenser

M4200 OTOSCOPE/OPHTHALMOSCOPE,

WALL MOUNTED

VV Wall mounted otoscope and ophthalmoscope. Includes 6 foot line cord and plug and accepts and includes two handles. Contains head turn-on/turn-off, built-in speculum tray and 8 foot coiled cords. Unit is designed for use in patient exam rooms.

M4655 STRETCHER, MOBILE, CRS, 9

POSITION

VV Mobile stretcher. All corrosion resistant stainless steel construction. It consists of a tubular frame with side rails, a 9-position hydraulic base with pneumatic fowler adjustment, and a 2" pad. Unit is mounted on 8" conductive casters. Designed for patient transport as well as for minor surgical procedures.

M4705 WHEELCHAIR, PATIENT

TRANSPORT, FOLDING

VV Folding patient transport wheelchair. Constructed of chrome plated steel with detachable armrest and footrests. Unit has heavy duty front casters with sealed radial high-precision ball bearing assembly. Unit is used for patient transport.

M7011 BED, PLATFORM, W/O VISIBLE

LEGS, PSYCHIATRIC

VV Platform bed and mattress with enclosed under carriage, no visible legs. Provided with 5/8" plywood deck, eight restraint holders, two at head and foot, three at each side, concealed steel frame, and means to bolt to the floor. Sides and ends are finished wood panels.

E - EQUIPMENT SCHEDULE

JSN NAME

FURNISH

/ INSTALL DESCRIPTION

M7401 LIGHT, EXAM, MOBILE,

SPLOTLIGHT, MOBILE STAND

VC Dual head surgical light ceiling mounted from a single pole. Unit has two lamp heads of differing sizes mounted on individual swing arms. Unit features multiple lighting pods in each lamp head, deep cavity illumination, color-corrected light, intensity control and sterilizable handles. Refer to the manufacturers' specifications for minimum ceiling heights and installation data. The database height dimension below refers to the height of the lamp head itself. The width and depth measurements are the larger of the two sums of the swing arm length and the head diameter. For use in general purpose surgical suites.

M7660 WHITEBOARD/BULLETIN BOARD,

COMBINATION

VV Portable defibrillator-monitor-recorder. Integral unit system operable from self-contained rechargeable batteries. ECG may be viewed through paddles or patient cable. Options include external pacing and 12-Lead.

M7845 ELECTROCARDIOGRAPH, 12

LEAD, PORTABLE

VV Used to detect the electrical signals associated with cardiac activity, diagnose cardiac abnormalities, determine a patients response to drug therapy and reveal trends or changes in heart function. Capable of recording two or more leads simultaneously, recording an entire 12 lead ECG in about 10 seconds. Portable.

M7850 MONITOR, PHYSIOLOGICAL,

CENTRAL, 8 BED, COLOR

VV Eight bed central physiologic monitoring station. System consists of a central monitor that displays patient information from bedside monitors. It also centralizes alarm and recording functions from ECG tracings to vital signs display. Up to eight patients monitoring capabilities. Designed for use in the ICU, CCU, emergency room or recovery room.

M9025 TABLE,

EXAMINATION/TREATMENT,

WITH CABINET

VV Table, examination/treatment with cabinet. Cabinet type exam table with three section upholstered top adjustable to a full chair position. Concealed heel stirrups, dual outlets, drawers, and storage space with optional armboard. Unit is designed for general use in examination/treatment rooms.

P2000 EYEWASH, WALL MOUNTED,

HANDS FREE

CC Wall mounted emergency eye wash station. The flow of water from the unit is activated by hand. Upon initiation of water flow the unit will operate hands free to provide streams of water to clear foreign particles or dilute caustic liquids from the eyes in emergency situations. Used in laboratories and areas of the hospital where employees are subject to foreign bodies or liquid material to the eyes.

P3100 LAVATORY, VITREOUS CHINA,

SLAB TYPE

CC Wall mounted, slab type, vitreous china, lavatory (approximate bowl size 7"x15"x10") with: faucet holes on 4" centers; gooseneck spout;

wrist blade handles; and grid strainer. It shall be suitable for use in clinics, offices, washrooms or patient care area.

P6500 SINK, SERVICE, CLINIC W/

FLUSHING RIM

CC Sink, Service, clinic, flushing rim, wall hung (PG-18-1, MCS 22 40 00)

P9050 TOILET, WALL HUNG, SIPHON

JET

CC Sipheon jet water closet/toilet. This unit is wall hung with an elongated bowl, top spud flushometer, seat with open front and check hinge, and carrier. Used in restrooms throughout the healthcare facility.

R6200 REFRIGERATOR, U/C OR F/S, 5

CU FT

VV Utility refrigerator approximately 35" H x 24" W x 26" D. The unit has a two tray ice cube cooling system. The refrigerator fits standard architectural dimensions for undercounter installation. The unit is perfect for use in nurses' station, wards, and laboratories, pharmacies or wherever space is limited.

R7250 REFRIGERATOR/FREEZER, 20

CUBIC FEET

VV Refrigerator/freezer unit. This type unit includes a food saver system that helps keep food fresher. It also includes roll out wheels and is equipped for an optional automatic icemaker. This unit is of commercial or residential design and use.

TA15 GRAB BAR - 36"

ABBREVIATION KEY:

EX EXISTING TO REMAIN

CC CONTRACTOR FURNISHED & INSTALLED

VC VENDOR FURNISHED, CONTRACTOR INSTALLED

VV VENDOR FURNISHED & INSTALLED

Revisions: Date:

35% ISSUANCE 04/28/2021

65% ISSUANCE 03/23/2022

95% ISSUANCE 05/04/2022

100% BID DOCUMENTS - RESUBMISSION #2 02/10/2023

FINAL BID DOCUMENTS 03/20/2023

VHANINSprinL Text Box

VV

VHANINSprinL Text Box

VV

VHANINSprinL Text Box

VV

VHANINSprinL Text Box

VV

VHANINSprinL Approved