2022-0427_Correct Water Infiltration AMEND 00001 DWGs_Part2.pdf

PDF 4 MB Posted Apr 28, 2022

Attached to: Z1DA--Correct Water Infiltration 610-20-102
Solicitation number: 36C25022B0009
Issued by: Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 10

About this file

Written by GovTribe AI · Dec 27, 2023

This document package includes construction drawings and specifications for a federal construction contract opportunity with the Department of Veterans Affairs. The contractor shall provide all labor, materials, equipment and supervision to complete a Correct Water Infiltration project at the Northern IN VA Medical Center in Marion, Indiana. Drawings show existing conditions and work required at six buildings, including removing and replacing roofing materials across various roof areas. Specifications describe replacing asphalt shingles with new stone-coated steel shingles, standing seam metal roofing, gutters and downspouts to address water infiltration issues. The contractor must ensure all work is watertight daily and relocate existing lightning protection.

View the file

Other files

File	Type	Posted
Amendment A00006 Rev DWGs_Part4.pdf	PDF	May 23, 2022
Amendment A00006 Rev DWGs_Part5.pdf	PDF	May 23, 2022
Amendment A00006 Rev DWGs_Part3.pdf	PDF	May 23, 2022
Amendment A00006 Rev DWGs_Part6.pdf	PDF	May 23, 2022
Amendment36C25022B0009 A00006.pdf	PDF	May 23, 2022
Amendment A00006 Rev DWGs_Part2.pdf	PDF	May 23, 2022
Amendment A00006 Rev DWGs_Part8.pdf	PDF	May 23, 2022
Amendment 0006 Summary.docx	DOCX document	May 23, 2022
Amendment A00006 Rev DWGs_Part1.pdf	PDF	May 23, 2022
Amendment A00006 Rev DWGs_Part7.pdf	PDF	May 23, 2022
Amendment36C25022B0009 A00005.pdf	PDF	May 17, 2022
Amendment 36C25022B0009 A00004.pdf	PDF	May 16, 2022
610-20-102 Correct Water Infiltration pre bid site visit attendance.pdf	PDF	May 16, 2022
2022-0427_Correct Water Infiltration AMEND 00001 DWGs_Part1.pdf	PDF	Apr 28, 2022
2022-0427_Correct Water Infiltration AMEND 00001 DWGs_Part4.pdf	PDF	Apr 28, 2022
Amendment A00003.docx	DOCX document	Apr 28, 2022
2022-0427_Correct Water Infiltration AMEND 00001 DWGs_Part3.pdf	PDF	Apr 28, 2022
2022-0427_Correct Water Infiltration AMEND 00001 DWGs_Part5.pdf	PDF	Apr 28, 2022
2022-0427_Correct Water Infiltration AMEND 00001 DWGs_Part6.pdf	PDF	Apr 28, 2022
Amendment 00002 Summary.pdf	PDF	Apr 28, 2022
Amendment A00002 - RFI Responses.docx	DOCX document	Apr 27, 2022
Amendment A00002 36C25022B0009.pdf	PDF	Apr 27, 2022
36C25022B0009 Amendment A00001.pdf	PDF	Apr 15, 2022
36C25022B0009 Solicitation.pdf	PDF	Mar 25, 2022
610-20-102 Correct Water Infiltration - comb dwgs.pdf	PDF	Mar 25, 2022
Wage Determination.txt	TXT text file	Mar 25, 2022
RFI Form.doc	DOC document	Mar 25, 2022
610-20-102 Correct Water Infiltration - spec.pdf	PDF	Mar 25, 2022
Contractor Certification Regarding Safety and Environmental.pdf	PDF	Mar 25, 2022

Show all 29

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

AE2022

AE202

AE202 3

12:1212:12

12:12

12:12 12:12

12:1212:12

12:12

12:12 12:12

12:12

12:1212:12

TYP. TYP.

TYP.

AE501

Sim4

AE501

Sim

AE501

Sim

AE501

Sim

TYP.

4 4

TYP.

11 11122

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

DRAWING OF 24

C U s e rs

\n a te m

\O n e

D ri v e \D o c u m e n ts

\F F

M a ri o n

W a te r

In fi lt ra ti o n

B n a te

.m o u ld s .r v t

AE102

BUILDING 2 - ROOF PLAN

03/11/2021 PQ BL

MARION INDIANA

#610-20-102CONSTRUCTION

DOCUMENTS

CORRECT WATER

INFILTRATION

KEY PLAN

SCALE: 1/8" = 1'-0"

BUILDING 2 - ROOF PLAN

1 REMOVE EXISTING ASPHALT SHINGLES AND UNDERLAYMENT - REPLACE

WITH NEW STONE COATED STEEL SHINGLES OVER #30 FELT

UNDERLAYMENT OVER EXISTING SHEATHING. REPLACE SHEATHING AND

INSULATION WHERE DAMAGED - ASSUME 10% SHEATHING AND

INSULATION REPLACEMENT AT RAFTERS - SEE SECTIONS AND DETAILS ON

AE501 AND AE502.

2 VALLEY FLASHING BY SHINGLE MANUFACTURER.

3 RIDGE CAP BY SHINGLE MANUFACTURER TO MATCH ADJACENT SHINGLES

- TYPICAL.

4 REMOVE EXISTING ROOF HATCH - PATCH OPENING WITH WOOD FRAMING

AND SHEATHING - PREPARE TO RECEIVE NEW SHINGLES.

5 PROTECT EXISTING DOWNSPOUT DURING ALL PHASES OF

CONSTRUCTION.

6 PROVIDE NEW STEP FLASHING AT INTERSECTION WITH WALL.

7 REMOVE AND REPLACE EXISTING METAL ROOF WITH NEW STANDING

SEAM METAL ROOF - COLOR: COPPER.

8 REPLACE EXISTING BOX GUTTER - INSTALL NEW METAL GUTTER BOX,

PEEL & SEAL LINER, AND METAL CORNICE PROFILE AND ASSOCIATED

BLOCKING, TYPICAL UNLESS NOTED OTHERWISE - SEE DETAILS ON AE501

AND AE502.

9 EXISTING DOWNSPOUT SHALL REMAIN - EXTEND EXISTING DOWNSPOUT

TO EXISTING BOOT - APPROXIMATELY 12 INCHES.

10 EXISTING COPPER ROOF TO REMAIN. EXISTING COPPER GUTTERS AND

DOWNSPOUTS TO REMAIN.

11 NEW 3"X4" COPPER COLOR DOWNSPOUT TO EXISTING BOOT.

12 NEW GUTTER FORMED FROM SAME MATERIAL AS ROOF PANELS - COLOR:

COPPER

13 INSTALL CLAMP-TO-SEAM SNOW GUARDS AT 24" AND 36" FROM FASCIA

BOARD - 16" O.C. - COLOR: COPPER TO MATCH ROOFING MATERIAL.

A. THE ROOFING SYSTEM SHALL BE COMPLETELY WATERTIGHT AT THE END OF EACH DAY’S

CONSTRUCTION ACTIVITY. IF TEMPORARY ROOFING STRATEGIES ARE USED, MATERIALS

INSTALLED SHALL SERVE THE SAME FUNCTION AS EXISTING MATERIALS AND WILL BE

COMPATIBLE WITH EXISTING ROOF SYSTEM.

B. CONTRACTOR SHALL RELOCATE EXISTING SURFACE-MOUNTED LIGHTNING PROTECTION

SYSTEM AS NEEDED. REINSTALL SYSTEM AT COMPLETION OF ROOF WORK IN EACH ROOF

AREA. CONTRACTOR SHALL RECERTIFY ENTIRE LIGHTNING PROTECTION SYSTEM AT

CONCLUSION OF PROJECT.

C. NOTE REMOVED.

D. EXISTING PLUMBING VENTS ARE NOT SHOWN ON ROOF PLAN BUT SHALL BE INCLUDED IN THE

PROJECT BID AND COMPLETED ACCORDING TO DETAILS AND/OR ROOFING SYSTEM

REQUIREMENTS.

E. ALL DOORS AND WINDOWS ARE EXISTING TO REMAIN UNLESS NOTED OTHERWISE.

D R A W I N G N O T E SG E N E R A L N O T E S

No. Revisions: Date:

1 ADDENDUM 001 04/27/2022

AE2032

AE203

AE203 3

12:1212:12

12:12

12:1212:12

12:12

12:12 12:12

12:12

12:1212:12

TYP.

TYP.2

AE501

Sim

AE501

Sim

AE501

Sim

AE501

Sim

AE203 AE203 6

TYP.

10 112

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

DRAWING OF 24

C U s e rs

\n a te m

\O n e

D ri v e \D o c u m e n ts

\F F

M a ri o n

W a te r

In fi lt ra ti o n

B n a te

.m o u ld s .r v t

AE103

BUILDING 3 - ROOF PLAN

03/11/2021 PQ BL

MARION, INDIANA

#610-20-102CONSTRUCTION

DOCUMENTS

CORRECT WATER

INFILTRATION

KEY PLAN

SCALE: 1/8" = 1'-0"

BUILDING 3 - ROOF PLAN

1 REMOVE EXISTING ASPHALT SHINGLES AND UNDERLAYMENT - REPLACE

WITH NEW STONE COATED STEEL SHINGLES OVER #30 FELT

UNDERLAYMENT OVER EXISTING SHEATHING. REPLACE SHEATHING AND

INSULATION WHERE DAMAGED - ASSUME 10% SHEATHING AND

INSULATION REPLACEMENT AT RAFTERS - SEE SECTIONS AND DETAILS ON

AE501 AND AE502.

2 VALLEY FLASHING BY SHINGLE MANUFACTURER.

3 RIDGE CAP BY SHINGLE MANUFACTURER TO MATCH ADJACENT SHINGLES

- TYPICAL.

4 REMOVE EXISTING ROOF HATCH - PATCH OPENING WITH WOOD FRAMING

AND SHEATHING - PREPARE TO RECEIVE NEW SHINGLES.

5 PROTECT EXISTING DOWNSPOUT DURING ALL PHASES OF

CONSTRUCTION.

6 PROVIDE NEW STEP FLASHING AT INTERSECTION WITH WALL.

7 REMOVE AND REPLACE EXISTING METAL ROOF WITH NEW STANDING

SEAM METAL ROOF - COLOR: COPPER.

8 REPLACE EXISTING BOX GUTTER - INSTALL NEW METAL GUTTER BOX,

PEEL & SEAL LINER, AND METAL CORNICE PROFILE AND ASSOCIATED

BLOCKING, TYPICAL UNLESS NOTED OTHERWISE - SEE DETAILS ON AE501

AND AE502.

9 EXISTING COPPER ROOF TO REMAIN. EXISTING COPPER GUTTERS AND

DOWNSPOUTS TO REMAIN.

10 NEW 3"X4" COPPER COLOR DOWNSPOUT TO EXISTING BOOT.

11 NEW GUTTER FORMED FROM SAME MATERIAL AS ROOF PANELS - COLOR:

COPPER

12 INSTALL CLAMP-TO-SEAM SNOW GUARDS AT 24" AND 36" FROM FASCIA

BOARD - 16" O.C. - COLOR: COPPER TO MATCH ROOFING MATERIAL.

A. THE ROOFING SYSTEM SHALL BE COMPLETELY WATERTIGHT AT THE END OF EACH DAY’S

CONSTRUCTION ACTIVITY. IF TEMPORARY ROOFING STRATEGIES ARE USED, MATERIALS

INSTALLED SHALL SERVE THE SAME FUNCTION AS EXISTING MATERIALS AND WILL BE

COMPATIBLE WITH EXISTING ROOF SYSTEM.

B. CONTRACTOR SHALL RELOCATE EXISTING SURFACE-MOUNTED LIGHTNING PROTECTION

SYSTEM AS NEEDED. REINSTALL SYSTEM AT COMPLETION OF ROOF WORK IN EACH ROOF

AREA. CONTRACTOR SHALL RECERTIFY ENTIRE LIGHTNING PROTECTION SYSTEM AT

CONCLUSION OF PROJECT.

C. NOTE REMOVED.

D. EXISTING PLUMBING VENTS ARE NOT SHOWN ON ROOF PLAN BUT SHALL BE INCLUDED IN THE

PROJECT BID AND COMPLETED ACCORDING TO DETAILS AND/OR ROOFING SYSTEM

REQUIREMENTS.

E. ALL DOORS AND WINDOWS ARE EXISTING TO REMAIN UNLESS NOTED OTHERWISE.

D R A W I N G N O T E SG E N E R A L N O T E S

No. Revisions: Date:

AE2042

AE204

AE204 3

12:1212:12

12:12

12:12 12:12

12:1212:1212:12

12:12 12:12

12:12

12:1212:12

TYP. TYP.

TYP.

AE501

Sim

AE501

Sim

AE501

Sim

AE501

Sim

TYP.

1010 11 12

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

DRAWING OF 24

C U s e rs

\n a te m

\O n e

D ri v e \D o c u m e n ts

\F F

M a ri o n

W a te r

In fi lt ra ti o n

B n a te

.m o u ld s .r v t

AE104

BUILDING 4 - ROOF PLAN

03/11/2021 PQ BL

MARION, INDIANA

#610-20-102CONSTRUCTION

DOCUMENTS

CORRECT WATER

INFILTRATION

KEY PLAN

SCALE: 1/8" = 1'-0"

BUILDING 4 - ROOF PLAN

1 REMOVE EXISTING ASPHALT SHINGLES AND UNDERLAYMENT - REPLACE

WITH NEW STONE COATED STEEL SHINGLES OVER #30 FELT

UNDERLAYMENT OVER EXISTING SHEATHING. REPLACE SHEATHING AND

INSULATION WHERE DAMAGED - ASSUME 10% SHEATHING AND

INSULATION REPLACEMENT AT RAFTERS - SEE SECTIONS AND DETAILS ON

AE501 AND AE502.

2 VALLEY FLASHING BY SHINGLE MANUFACTURER.

3 RIDGE CAP BY SHINGLE MANUFACTURER TO MATCH ADJACENT SHINGLES

- TYPICAL.

4 REMOVE EXISTING ROOF HATCH - PATCH OPENING WITH WOOD FRAMING

AND SHEATHING - PREPARE TO RECEIVE NEW SHINGLES.

5 PROTECT EXISTING DOWNSPOUT DURING ALL PHASES OF

CONSTRUCTION.

6 PROVIDE NEW STEP FLASHING AT INTERSECTION WITH WALL.

7 REMOVE AND REPLACE EXISTING METAL ROOF WITH NEW STANDING

SEAM METAL ROOF - COLOR: COPPER.

8 REPLACE EXISTING BOX GUTTER - INSTALL NEW METAL GUTTER BOX,

PEEL & SEAL LINER, AND METAL CORNICE PROFILE AND ASSOCIATED

BLOCKING, TYPICAL UNLESS NOTED OTHERWISE - SEE DETAILS ON AE501

AND AE502.

9 EXISTING COPPER ROOF TO REMAIN. EXISTING COPPER GUTTERS AND

DOWNSPOUTS TO REMAIN.

10 NEW 3"X4" COPPER COLOR DOWNSPOUT TO EXISTING BOOT.

11 NEW GUTTER FORMED FROM SAME MATERIAL AS ROOF PANELS - COLOR:

COPPER

12 INSTALL CLAMP-TO-SEAM SNOW GUARDS AT 24" AND 36" FROM FASCIA

BOARD - 16" O.C. - COLOR: COPPER TO MATCH ROOFING MATERIAL.

A. THE ROOFING SYSTEM SHALL BE COMPLETELY WATERTIGHT AT THE END OF EACH DAY’S

CONSTRUCTION ACTIVITY. IF TEMPORARY ROOFING STRATEGIES ARE USED, MATERIALS

INSTALLED SHALL SERVE THE SAME FUNCTION AS EXISTING MATERIALS AND WILL BE

COMPATIBLE WITH EXISTING ROOF SYSTEM.

B. CONTRACTOR SHALL RELOCATE EXISTING SURFACE-MOUNTED LIGHTNING PROTECTION

SYSTEM AS NEEDED. REINSTALL SYSTEM AT COMPLETION OF ROOF WORK IN EACH ROOF

AREA. CONTRACTOR SHALL RECERTIFY ENTIRE LIGHTNING PROTECTION SYSTEM AT

CONCLUSION OF PROJECT.

C. NOTE REMOVED.

D. EXISTING PLUMBING VENTS ARE NOT SHOWN ON ROOF PLAN BUT SHALL BE INCLUDED IN THE

PROJECT BID AND COMPLETED ACCORDING TO DETAILS AND/OR ROOFING SYSTEM

REQUIREMENTS.

E. ALL DOORS AND WINDOWS ARE EXISTING TO REMAIN UNLESS NOTED OTHERWISE.

D R A W I N G N O T E SG E N E R A L N O T E S

No. Revisions: Date:

AE2052

AE205

AE205 3

12:1212:12

12:12

12:1212:12

:1 211:1211:12

12:12

12:12 12:12

12:12

12:1212:12

TYP.

TYP. TYP.

3 3

TYP.

2 222

4 5

AE501

Sim

AE501

Sim

AE501

Sim

AE501

Sim

TYP.

9 10 112

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

DRAWING OF 24

C U s e rs

\n a te m

\O n e

D ri v e \D o c u m e n ts

\F F

M a ri o n

W a te r

In fi lt ra ti o n

B n a te

.m o u ld s .r v t

AE105

BUILDING 5 - ROOF PLAN

03/11/2021 PQ BL

MARION, INDIANA

#610-20-102CONSTRUCTION

DOCUMENTS

CORRECT WATER

INFILTRATION

KEY PLAN

SCALE: 1/8" = 1'-0"

BUILDING 5 - ROOF PLAN

1 REMOVE EXISTING ASPHALT SHINGLES AND UNDERLAYMENT - REPLACE

WITH NEW STONE COATED STEEL SHINGLES OVER #30 FELT

UNDERLAYMENT OVER EXISTING SHEATHING. REPLACE SHEATHING AND

INSULATION WHERE DAMAGED - ASSUME 10% SHEATHING AND

INSULATION REPLACEMENT AT RAFTERS - SEE SECTIONS AND DETAILS ON

AE501 AND AE502.

2 VALLEY FLASHING BY SHINGLE MANUFACTURER.

3 RIDGE CAP BY SHINGLE MANUFACTURER TO MATCH ADJACENT SHINGLES

- TYPICAL.

4 NEW 3"X4" COPPER COLOR DOWNSPOUT TO EXISTING BOOT.

5 REMOVE EXISTING ROOF HATCH - PATCH OPENING WITH WOOD FRAMING

AND SHEATHING - PREPARE TO RECEIVE NEW SHINGLES.

6 PROVIDE NEW STEP FLASHING AT INTERSECTION WITH WALL.

7 REMOVE AND REPLACE EXISTING METAL ROOF WITH NEW STANDING

SEAM METAL ROOF - COLOR: COPPER.

8 REPLACE EXISTING BOX GUTTER - INSTALL NEW METAL GUTTER BOX,

PEEL & SEAL LINER, AND METAL CORNICE PROFILE AND ASSOCIATED

BLOCKING, TYPICAL UNLESS NOTED OTHERWISE - SEE DETAILS ON AE501

AND AE502.

9 NEW 3"X4" COPPER COLOR DOWNSPOUT TO EXISTING BOOT.

10 NEW GUTTER FORMED FROM SAME MATERIAL AS ROOF PANELS - COLOR:

COPPER

11 INSTALL CLAMP-TO-SEAM SNOW GUARDS AT 24" AND 36" FROM FASCIA

BOARD - 16" O.C. - COLOR: COPPER TO MATCH ROOFING MATERIAL.

A. THE ROOFING SYSTEM SHALL BE COMPLETELY WATERTIGHT AT THE END OF EACH DAY’S

CONSTRUCTION ACTIVITY. IF TEMPORARY ROOFING STRATEGIES ARE USED, MATERIALS

INSTALLED SHALL SERVE THE SAME FUNCTION AS EXISTING MATERIALS AND WILL BE

COMPATIBLE WITH EXISTING ROOF SYSTEM.

B. CONTRACTOR SHALL RELOCATE EXISTING SURFACE-MOUNTED LIGHTNING PROTECTION

SYSTEM AS NEEDED. REINSTALL SYSTEM AT COMPLETION OF ROOF WORK IN EACH ROOF

AREA. CONTRACTOR SHALL RECERTIFY ENTIRE LIGHTNING PROTECTION SYSTEM AT

CONCLUSION OF PROJECT.

C. NOTE REMOVED.

D. EXISTING PLUMBING VENTS ARE NOT SHOWN ON ROOF PLAN BUT SHALL BE INCLUDED IN THE

PROJECT BID AND COMPLETED ACCORDING TO DETAILS AND/OR ROOFING SYSTEM

REQUIREMENTS.

E. ALL DOORS AND WINDOWS ARE EXISTING TO REMAIN UNLESS NOTED OTHERWISE.

D R A W I N G N O T E SG E N E R A L N O T E S

No. Revisions: Date:

AE2062

AE206

AE206 3

12:1212:12

12:12

12:12 12:12

:1 2 1

12:1212:12

12:12

12:12 12:12

12:12

12:1212:12

TYP. TYP.

TYP.

2 2

AE501

Sim

AE501

Sim

AE501

Sim

AE501

Sim

5 5

8 9

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

DRAWING OF 24

C U s e rs

\n a te m

\O n e

D ri v e \D o c u m e n ts

\F F

M a ri o n

W a te r

In fi lt ra ti o n

B n a te

.m o u ld s .r v t

AE106

BUILDING 6 - ROOF PLAN

03/11/2021 PQ BL

MARION, INDIANA

#610-20-102CONSTRUCTION

DOCUMENTS

CORRECT WATER

INFILTRATION

KEY PLAN

SCALE: 1/8" = 1'-0"

BUILDING 6 - ROOF PLAN

1 REMOVE EXISTING ASPHALT SHINGLES AND UNDERLAYMENT - REPLACE

WITH NEW STONE COATED STEEL SHINGLES OVER #30 FELT

UNDERLAYMENT OVER EXISTING SHEATHING. REPLACE SHEATHING AND

INSULATION WHERE DAMAGED - ASSUME 10% SHEATHING AND

INSULATION REPLACEMENT AT RAFTERS - SEE SECTIONS AND DETAILS ON

AE501 AND AE502.

2 VALLEY FLASHING BY SHINGLE MANUFACTURER.

3 RIDGE CAP BY SHINGLE MANUFACTURER TO MATCH ADJACENT SHINGLES

- TYPICAL.

4 REMOVE EXISTING ROOF HATCH - PATCH OPENING WITH WOOD FRAMING

AND SHEATHING - PREPARE TO RECEIVE NEW SHINGLES.

5 PROTECT EXISTING DOWNSPOUT DURING ALL PHASES OF

CONSTRUCTION.

6 PROVIDE NEW STEP FLASHING AT INTERSECTION WITH WALL.

7 REMOVE AND REPLACE EXISTING METAL ROOF WITH NEW STANDING

SEAM METAL ROOF - COLOR: COPPER.

8 NEW 3"X4" COPPER COLOR DOWNSPOUT TO EXISTING BOOT.

9 NEW GUTTER FORMED FROM SAME MATERIAL AS ROOF PANELS - COLOR:

COPPER

10 EXISTING COPPER ROOF TO REMAIN. EXISTING COPPER GUTTERS AND

DOWNSPOUTS TO REMAIN.

11 REPLACE EXISTING BOX GUTTER - INSTALL NEW METAL GUTTER BOX,

PEEL & SEAL LINER, AND METAL CORNICE PROFILE AND ASSOCIATED

BLOCKING, TYPICAL UNLESS NOTED OTHERWISE - SEE DETAILS ON AE501

AND AE502.

12 INSTALL CLAMP-TO-SEAM SNOW GUARDS AT 24" AND 36" FROM FASCIA

BOARD - 16" O.C. - COLOR: COPPER TO MATCH ROOFING MATERIAL.

A. THE ROOFING SYSTEM SHALL BE COMPLETELY WATERTIGHT AT THE END OF EACH DAY’S

CONSTRUCTION ACTIVITY. IF TEMPORARY ROOFING STRATEGIES ARE USED, MATERIALS

INSTALLED SHALL SERVE THE SAME FUNCTION AS EXISTING MATERIALS AND WILL BE

COMPATIBLE WITH EXISTING ROOF SYSTEM.

B. CONTRACTOR SHALL RELOCATE EXISTING SURFACE-MOUNTED LIGHTNING PROTECTION

SYSTEM AS NEEDED. REINSTALL SYSTEM AT COMPLETION OF ROOF WORK IN EACH ROOF

AREA. CONTRACTOR SHALL RECERTIFY ENTIRE LIGHTNING PROTECTION SYSTEM AT

CONCLUSION OF PROJECT.

C. NOTE REMOVED.

D. EXISTING PLUMBING VENTS ARE NOT SHOWN ON ROOF PLAN BUT SHALL BE INCLUDED IN THE

PROJECT BID AND COMPLETED ACCORDING TO DETAILS AND/OR ROOFING SYSTEM

REQUIREMENTS.

E. ALL DOORS AND WINDOWS ARE EXISTING TO REMAIN UNLESS NOTED OTHERWISE.

D R A W I N G N O T E SG E N E R A L N O T E S

No. Revisions: Date:

AE207

AE2073

AE207

AE207 4

AE501

11 11

TYP.

BUILDING 172

BUILDING 124

BUILDING 174

BUILDING 16

BUILDING 127

TYP.

4:12

6:126:12

4:12

4:12 4:12

6:126:12

TYP.

TYP. TYP.

12 12

121212

AE501

Sim

AE501

Sim

AE501

Sim

AE501

Sim

TYP.

16 16

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

PhaseARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

DRAWING OF 24

C :\U se rs

\q ui nn \D oc um en ts

_M ar io n

- W at er In fil tra tio n_

0) _p at ric k.

qu in nF

.rv t

AE107

BUILDING 15 - ROOF PLAN

03/11/2021 PQ BL

MARION, INDIANA

#610-20-102CONSTRUCTION

DOCUMENTS

CORRECT WATER

INFILTRATION

SCALE: 1/8" = 1'-0"

BUILDING 15 - ROOF PLAN

1 REMOVE EXISTING ASPHALT SHINGLES AND UNDERLAYMENT - REPLACE

WITH NEW STONE COATED STEEL SHINGLES OVER #30 FELT

UNDERLAYMENT OVER EXISTING SHEATHING. REPLACE SHEATHING AND

INSULATION WHERE DAMAGED - ASSUME 10% SHEATHING AND INSULATION

REPLACEMENT AT RAFTERS - SEE SECTIONS AND DETAILS ON AE501 AND

AE502.

2 EXISTING METAL ROOF TO REMAIN - PREPARE SURFACE AND APPLY 3-PLY

SELF-ADHERED SBS MODIFIED BITUMIN MEMBRANE TO EXTENT OF METAL

ROOF AND EXTEND 24" UP ADJACENT ROOF SLOPE. INSTALL NEW

BLOCKING WHERE REQUIRED. SEE DETAIL 9/AE501.

3 NO WORK IN THIS AREA.

4 SEE SHEETS AE110 AND AE210 FOR DEMOLITION AND NEW WORK AT

BUILDING 124.

5 SEE SHEETS AE108 AND AE208 FOR DEMOLITION AND NEW WORK AT

BUILDING 16.

6 NEW EXPANSION JOINT AT EXISTING LOCATION - DETAILS PER SHINGLE

MANUFACTURER.

7 EXISTING ROOF HATCH TO REMAIN.

8 EXISTING METAL CAP TO REMAIN - PREPARE SURFACE AND APPLY

SELF-ADHERED SBS.

9 RIDGE CAP BY SHINGLE MANUFACTURER TO MATCH ADJACENT SHINGLES -

TYPICAL.

10 VALLEY FLASHING BY SHINGLE MANUFACTURER.

11 PROVIDE NEW STEP FLASHING AT INTERSECTION WITH WALL.

12 PROTECT EXISTING DOWNSPOUT DURING ALL PHASES OF CONSTRUCTION.

13 EXISTING ALUMINUM GUTTER TO REMAIN.

14 ALTERNATE #1: FALL PROTECTION ROOF ANCHOR SPACED AT 20’ O.C., NO

MORE THAN 24” FROM ROOF PEAK. INSTALL INTO STRUCTURAL FRAMING

AND COORDINATE WITH SHINGLE INSTALLATION.

15 CRICKET BY SHINGLE MANUFACTURER TO MATCH ADJACENT SHINGLES.

16 REPLACE EXISTING BOX GUTTER - INSTALL NEW METAL GUTTER BOX, PEEL

& SEAL LINER, AND METAL CORNICE PROFILE AND ASSOCIATED BLOCKING,

TYPICAL UNLESS NOTED OTHERWISE - SEE DETAILS ON AE501 AND AE502.

D R A W I N G N O T E S

G E N E R A L N O T E S

KEY PLAN

A. THE ROOFING SYSTEM SHALL BE COMPLETELY WATERTIGHT AT THE END OF EACH DAY’S

CONSTRUCTION ACTIVITY. IF TEMPORARY ROOFING STRATEGIES ARE USED, MATERIALS

INSTALLED SHALL SERVE THE SAME FUNCTION AS EXISTING MATERIALS AND WILL BE

COMPATIBLE WITH EXISTING ROOF SYSTEM.

B. CONTRACTOR SHALL RELOCATE EXISTING SURFACE-MOUNTED LIGHTNING PROTECTION

SYSTEM AS NEEDED. REINSTALL SYSTEM AT COMPLETION OF ROOF WORK IN EACH ROOF

AREA. CONTRACTOR SHALL RECERTIFY ENTIRE LIGHTNING PROTECTION SYSTEM AT

CONCLUSION OF PROJECT.

C. NOTE REMOVED.

D. EXISTING PLUMBING VENTS ARE NOT SHOWN ON ROOF PLAN BUT SHALL BE INCLUDED IN THE

PROJECT BID AND COMPLETED ACCORDING TO DETAILS AND/OR ROOFING SYSTEM

REQUIREMENTS.

E. MISCELLANEOUS MECHANICAL, PLUMBING, OR ELECTRICAL PENETRATIONS THRU ROOF MAY

NOT BUT SHOWN BUT SHALL BE INCLUDED IN THE PROJECT BID AND COMPLETED

ACCORDING TO ROOFING SYSTEM REQUIREMENTS. COORDINATE REMOVAL WITH NEW

WORK PLANS AND SECTIONS. ALL PENETRATIONS SHALL BE FLASHED AND MAINTAIN

WATERTIGHTNESS THROUGHOUT COMPLETION OF CONSTRUCTION.

F. EXISTING STRUCTURAL AND FRAMING MEMBERS TO REMAIN UNLESS NOTED OTHERWISE.

No. Revisions: Date:

1 ADDENDUM 001 04/27/2022

07.04_AE102 - BUILDING 2 - ROOF PLAN

AE102 - BUILDING 2 - ROOF PLAN

07.05_AE103 - BUILDING 3 - ROOF PLAN

AE103 - BUILDING 3 - ROOF PLAN

07.06_AE104 - BUILDING 4 - ROOF PLAN

AE104 - BUILDING 4 - ROOF PLAN

AE101 - BUILDING 1 - ROOF PLAN

File details come from the government source that posted it. Updated Apr 28, 2022.