Azurion Specification 7 F-C20 (incl. FlexArm) _ Philips IGT.pdf

Azurion 7

Image Guided Therapy System

With Azurion performance and superior care become one Specifications Image Guided Therapy System - Azurion 7 C20, Azurion 7 F20, Azurion 7 C20 with FlexArm, Azurion 7 C20 with FlexMove

2 3

Contents

4 5

1 Geometry

Technical specifications Iso-center to floor Ceiling: 106.5 cm (41.9 inch)

Floor: 114.5 cm (45 inches)

Longitudinal movement Ceiling is manual and motorized of 260 cm (102.4 inch) up to 15 cm/sec (5.9 inch/sec). It includes auto stops at the park position, cardio position, neuro position and lower peripheral position.

FlexArm ranges are 285 cm (112.2 inch), 455 cm (179.1 inch) or 635 cm (250 inch) Floor has no longitudinal movement

L-arm rotation Motorized and manual movement, over 180° with snap positions at 90°, -0°, -90° to allow patient access from three sides of the table

C-arm rotation / speed In head-end position: 120° LAO, 185° RAO, in side position: 90° LAO, 90° RAO Speed up to 25°/sec and 55°/sec for rotational angio in head position.

For FlexArm speed up to 25°/sec and 55°/sec for rotational angio in head position and 25°/sec and 40°/sec for rotational scan in side position

C-arm angulation / speed In head-end position: 90° cranial, 90° caudal up to 25°/sec.

In side position: 185° cranial, 120° caudal up to 25°/sec.

Focal spot to iso-center 81 cm (31.9 inch)

Source Image Distance 89.5-119.5 cm (35.2-47 inch)

C-arm depth 90 cm (35.43 inch)

Rotation of the flat detector Re-positioning of the Flat Detector from portrait to landscape within 3 seconds.

In case of rotational scan Maximum rotation is from 185 degrees RAO to 120 degrees LAO Maximum rotation speed in head position 55°/sec.

Roll movement: From 90° LAO to 90° RAO at a speed of up to 40°/s

FlexMove FlexMove is an advanced ceiling rail solution that offers exceptional flexibility for the hybrid OR. It can be moved longitudinally and transversally to examine the patient without panning the table and tangling wires and tubes.

Movement range:

FlexArm FlexArm is a unique eight-axis ceiling-mounted system that provides unlimited imaging flexibility for diverse procedures and exceptional positioning freedom for medical teams.

Movement range:

• FlexArm makes manual and motorized movements, over 270° with snap positions at 135°, 90°, 0°, -90°, -135° to allow patient access from all sides of the table

• FlexArm allows for transversal movement of 236 cm (92.9 inch)

Image beam rotation on FlexArm X-ray collimation: Synchronous rotation for heads‑up image at any gantry position Cleanability: Fully sealed tube housing for complete IPX2 rated cleaning

Optional Full system Automatic Position Control (APC) Full system APC allows you to recall the stored position for a particular image or previous position to simplify positioning. You can recall a stored position for the table alone and for the table’s isocenter-related position. The following parameters are stored and recalled: C-arm angulation, longitudinal and transversal position, the table’s longitudinal and transversal position and height, SID, field of view, wedge filters and collimation.

Azurion 7 F20 (floor mounted system)

Azurion 7 C20 with FlexMove (ceiling mounted system)

Azurion 7 C20 with FlexArm (ceiling mounted system)

Azurion 7 C20 (ceiling mounted system) 1.1 Gantry / stand

Rock solid gantry design offers fast and easy table-side operation. Gantry, monitor suspension and operating modules can be freely positioned for full procedural flexibility.

The Azurion 7 series with 20" flat detectors is offered in Ceiling, Floor, FlexMove and FlexArm configurations to adapt to any room environment and/or procedure mix.

6 7

Table Table height (min.-max.) 74 cm - 102 cm (29.1 inch - 40.2 inch)

Table top length 319 cm (125.6 inch) including OR rails;

316 cm (124.4 inch) excluding OR rails

Table top width 50 cm (19.7 inch)

Longitudinal float range 120 cm (47.2 inch)

Lateral float range 36 cm (14.2 inch)

Max. table load 325 kg (715 lbs)

Max. patient weight 250 kg (550lbs) + 500 N for CPR.

CPR can be done in any position of the table top.

Table up/down speed 3 cm/s (1.2 inch/s)

Patient table options Pivot Transradial access, upper extremity angiography and patient transfer can be easily achieved with our optional pivot feature. One finger push-to-pivot allows effortless patient positioning. It moves with less friction, making it easier to move larger patients. A secure mechanism locks the tabletop in place to prevent it from moving.

Tilt Our optional tilt functionality allows you to tilt the table for gravity oriented or puncture procedures. As the table tilts, the X-ray beam automatically adapts to the movement to keep the region of interest in the isocenter of rotation and angulation of the stand. As a result, your region of interest always remains centered.

Tilt and cradle Many electrophysiology and non-vascular procedures benefit from additional positioning options. Our patient table with isocentric tilt and cradle-tilt functionality puts your gravity oriented or guided puncture procedures at the required angle.

Technical specifications options

Pivot -90°/+180° or -180°/90°

Swivel (includes pivot) Extended longitudinal range: 78.2 cm (30.8 inch) Height: +8 cm (3.15 inch) Pivot range: -90/+180

Tilt and cradle -16.5°/+16.5° iso-centric Cradle tilting range: ±15° Table height with tilt and cradle has a range between 79 cm (31.1 inch) and 104 cm (40.94)

Tilt Tilting range: -16.5°/+16.5° Table height with tilt and cradle: 79 cm (31.1 inch)/ 104 cm (40.94)

1.3 OR table*

OR table Every ceiling mounted system can be integrated with a Getinge Maquet Magnus OR table to create a truly multifunctional room suitable for conventional surgery, hybrid surgery and interventions.

FlexArm can also be integrated with the Hillrom TS7500 OR System Table.

* Always consult your Philips representative for the applicability of this solution in your specific case.

1.2 Patient table

The patient table is a dedicated interventional X-ray table that supports a full range of applications. A feather-light free floating tabletop helps maintain your region of interest and reduce effort.

It has very high patient loadability and CPR can be performed on the table.

8 9

Optional number of monitors 2 Fold MCS 1x 27" Full HD widescreen

4 Fold MCS 3 or 4x 27" Full HD widescreen, 6 Fold MCS 4x 27" Full HD widescreen + 1 or 2x 27" (top- or rear-viewing)

3rd party boom (1,2 or 4 fold)

27" or 32" Full HD widescreen monitor

4 Fold Philips boom 3 or 4x 27" Full HD widescreen

FlexVision XL MCS 1 x 58" XL screen

FlexVision XL MCS 1x 58" XL + 2x 27" Full HD widescreen (top- or rear-viewing)

FlexVision XL on Philips boom

1 x 58" XL screen or 2x27" XL screen

Monitor boom Movement range

Item Range Upper arm (horizontal) 1400 mm Lower arm (horizontal) 1015 mm Total (horizontal) 2415 mm

Standard accessories (patient table) Mattress

Patient straps

Set of arm supports (if cradle option is chosen)

Drip stand

OR rail accessory clamps

Cable holders (15 pieces)

1.4 Accessories

Additional options* Panhandle Additional OR-rail

Neuro Mattress (if Neuro tabletop) Table base accessory rail

Longer Cardio Mattress Examination light

Head support Arm support (height adjustable)

Arm support, incl. arm pad Table X-ray protection

Table clamp Peripheral X-ray filter

Set handgrips and clamps Pulse cath arm support

Additional OR-rail with cable extension kit for control modules

Ceiling suspended radiation shield

Ratchet compressor

1.3 Philips monitor ceiling suspension

The Philips monitor ceiling suspension allows flexible, freely rotating positioning of the monitors for an excellent viewing angle. A separate integration kit is available for third party monitor suspensions and ceiling booms. Standard, a 2-fold MCS is delivered with a 27" full HD widescreen monitor.

* in case of OR table other accessories may apply

Ceiling suspended radiation shield

Azurion 4 fold Monitor Ceiling Suspension

Table X-ray protection

2 User interface

10 11

Azurion viewpad controls

Azurion touch screen module (TSM)

2.1 User interface in the examination room

In the examination room, the user interface consists of three components:

• �The touch screen module (TSM) enables you to display and control compatible modalities from one place at table side.

With the touch screen module Pro (option), images shown on the live and reference monitor can also be viewed here.

• �The control module is used to make system movements and select X-ray settings. It can be positioned on three sides of the patient table. The position can be adapted to maintain the intuitive button operation. The control module has a protection bar that prevents unintended activation of the system.

• �FlexVision XL: Information is displayed on the FlexVision XL on-screen display in the examination room. FlexVision Pro is an option for the FlexVision XL, which enables flexible screen layouts and full control, with a mouse over, of up to 11 external sources, including third party systems.

On-screen display X-ray indicator

X-ray tube temperature condition

Radiographic parameters: kV, mA, ms

Rotation and angulation of the stand positions

Table height

Detector field size display

General system messages

Selected frame speed

Fluoroscopy mode

Integrated fluoroscopy time

Air Kerma dose (both rate and accumulated X-ray dose)

Dose Area Product (both rate and accumulated X-ray dose)

Azurion viewpad controls Run and image selection

Exam and run cycle

Review speed

Run and exam overview

Laser pointer

Flagging exam and run for storage

Storing reference image to reference monitors

Select reference monitors for review and/or processing of previous run exposures

Subtraction and image mask selection

Select reference monitors for review and/or processing of previous run exposures

Subtraction and image mask selection

Azurion touch screen module (TSM) Acquisition setting

MultiModality capabilities - Control and command compatible applications such as IntraSight from one touch screen module

Image Processing

Full system Automatic Position Control (APC): a great number of stand and table positions can be stored and recalled from touch screen module.

Quantitative Analysis (QA)

IntelliSpace Cardiovascular (ISCV) table side control

Philips Interventional Hemodynamic system table side control

CX50 table side control

Table and geometry lock functions

X-ray enable/disable

Fluoroscopy buzzer reset

Stopwatch

Fluoro store

Cleaning mode

Control of monitors (Switchable monitors or FlexVision XL)

12 13

Control module Pivot Lock

Tabletop float

Tabletop motorized float

Table height position

Table tilt angle (if the tilt option is available)

Table cradle angle (if the cradle option is available)

Source Image Distance selection

Stand positioning

Longitudinal and lateral movements (FlexMove and FlexArm)

Longitudinal movement of the stand along the ceiling

Stand rotation around the table

Recall of ‘unlimited’ number of stand and table positions via the touch screen module.

Accept button to activate an APC position selected on touch screen module

Emergency stop button

Geometry reset button, which resets stand and table to a default service configurable starting position

Fluoroscopy mode selection as defined via settings

Positioning of shutters and wedges without radiation

Fluoro storage to record fluoroscopy up to 2000 images

Selection of the detector field size

Reset of the fluoroscopy buzzer

Selection of Roadmap Pro function

Selection of SmartMask function (optional)

Control module

Axsys controller for FlexArm

ProcedureCards (standard)

Touch screen module Pro (option) With this option the X-ray images from the live as well as reference monitors will be shown on the touch screen module.

Image navigation on the touch screen module

Intuitive control of shutters and wedges by simply dragging the lines shown on top of the image

Intuitive zooming an panning functionality (also during fluoroscopy)

Virtual keyboard and touchpad to control external equipment (in combination with FlexVision Pro)

Turns the touchscreen into the pointing device in order to improve communication in exam room/control room:

when activated the pointer is shown on corresponding monitor

Mark relevant details on 2D images or make quick 2 point measurements on the touch screen

Axsys Control for FlexArm Intuitive gantry positioning via one integrated controller. Seamlessly manages procedural positioning and parking actions.

ProcedureCards The Azurion series include a range of ProcedureCards to help optimize and standardize system set-up for your cases, from routine to mixed procedures.

ProcedureCards can increase the consistency of exams by offering presets (e.g.

most-frequently used, default protocols and user-specified settings) on procedure-, physician- or departmental level. In addition, hospital checklists and/or protocols can be uploaded into the ProcedureCards to help safeguard the consistency of interventional procedures and help to minimize preparation errors.

Touch screen module Pro with intuitive interface and user guidance

FlexArm control module

14 15

2.2 User interface in the control room

The standard viewing console comprises of an acquisition monitor, review monitor, mouse and keyboard.

Azurion acquisition monitor Patient scheduling

Select patient for acquisition

Acquisition setting

Review runs

Archive runs

Step through file, run or images

File and run overview

Image processing features such as contrast, brightness and edge enhancement

Flagging of runs or images for transfer

Image annotation

Automatic printing

Video invert

Zoom and pan image

Electronic shutters

Toggle switch physio

Store/delete images/runs

Store fluoro

Pixel shift

System information viewable at Azurion acquisition monitor Stopwatch and Time

System guidance information

Dose Area Product (DAP) and Air Kerma X-ray Dose (both rate and accumulated X-ray dose)

Frame speed settings, fluoroscopy mode and accumulated fluoroscopy time

Exposure and fluoroscopy settings, such as Voltage (kV), Current (mA) and pulse time (ms)

Stand position information, such as rotation, angulation and

SID

Table information such as height, cradle, tilt

Azurion review monitor Quantitative Analysis Packages, optional

Subtraction (DSA)

Move or renew mask, optional

Landmarking (increase/decrease of subtraction degree)

View trace

Reset fluoroscopy timer and switch X-ray on/off

Geometry lock

ProcedureCards manager

File and run cycle

File, run and image stepping

Run and file overview

Reset fluoroscopy timer and switch X-ray on/off

Parallel Working, standard

Customization and electronic help

User interface options Pedestal • The pedestal creates a flexible workspot for operating the system from the examination room.

• The pedestal is equipped with a control module and can also hold the TSM, ViewPad and X-ray footswitch.

• The control module can be disconnected from the pedestal and attached to the table OP rail.

• The pedestal can be positioned freely around the patient table and can be put aside when not in use.

Second control module, third touch screen module

The system can be extended with additional user interface modules that have the same functionality as the modules in the examination room. Adding a second control module in the control room works in a master/ slave configuration.

Contrast injectors The system can be connected to contrast injectors to enhance procedures.

Wireless footswitch • �Our Wireless footswitch streamlines workflow, reduces clutter, and simplifies preparation and cleanup where it’s needed most – at the point of patient treatment. Clinicians can wirelessly control the X-ray system from any convenient position around the table.

• No sterile covers are needed with the IPX8 certified waterproof design. It’s one of Philips Live Image Guidance solutions for X-ray environments.

Additional options Intercom

Optional

FlexSpot FlexSpot offers an integrated workspot in the control room with up to three high resolution QHD (2560x1440) displays.

Wireless footswitch

Second control module, third touch screen module

Pedestal

Review module

Power on/off

Video Only mode in case of FlexSpot (optional)/FlexVision XL.

File and run cycle

File, Run, and Image stepping

Run and file overview

Enable/disable X-ray

Geometry lock

Reset of the fluoroscopy buzzer

16 17

Technical specifications Generated power Microprocessor-controlled, 100 kW high frequency generator

Minimum switching time Quartz-controlled power switch, with a minimum switching time of 1 ms

Voltage range 40 to 125 kV

Maximum current 1000 mA at 100 kV

Maximum continuous power 2.5 kW for 0.25 hours, 1.5 kW for 8 hours

Nominal power (highest electrical power)

100 kW (1000 mA at 100 kV)

Technical specifications Focal spot size and loadability 0.4/0.7 mm (0.016/0.028 inch) nominal focal spot values with maximal 30 kW and 65 kW loadability is based on 250 W anode reference power

Grid-switched pulsed fluoroscopy Yes

Fluoro power for 10 minutes 4,500 W

Fluoro power for 20 minutes 4,000 W

Maximum X-ray field with SID =

35 x 35 cm (13.8 x 13.8 inch)

Maximum X-ray field with SID =

42 x 42 cm (16.5 x 16.5 inch)

Maximum X-ray field with SID = 70 24.5 x 24.5 cm (9.7 x 9.7 inch)

Maximum anode cooling rate 1750 kHU/min

Max. anode heat storage 6.4 MHU

Max. assembly heat storage 9.4 MHU

Anode heat dissipation 21,000 W

Continuous anode heat dissipation 3,500 W

Max. assembly continuous heat dissipation

4,000 W

Extra pre-filtration SpectraBeam dose management with 0.2, 0.5, and 1.0 mm (0.01, 0.02 and 0.04 inch) copper equivalent SpectraBeam filters

Cooling liquid Oil cooled X-ray tube with thermal safety switch

Anode target angle 11o

Anode cooling method Direct anode oil cooling system with 20 cm (7.87 Inch ) anode diameter

3.2 X-ray tube

The Azurion 7 is provided with the high power MRC 200+ GS 0407 X-ray tube which allows for very high heat dissipation, enabling SpectraBeam filtration to manage the patient X-ray dose.

Improved design for the covers with FlexArm

3 X-ray generation

DICOM Radiation Dose Structured Report Collection of dose relevant parameters and settings with export possibility to a DICOM database (e.g. PACS, RIS). The reported data can be used for analysis, to further manage X-ray dose. The DICOM RDSR function collects and exports the required data. The software to provide the DICOM data for analysis and alerting needs to be acquired separately. secondary capture dose report function allows you to save and transfer, manually or automatically, a patient dose report to PACS in DICOM secondary capture format.

3.1 X-ray generator

The Certeray generator is enhanced for the latest interventional X-ray needs

18 19

4 Imaging

4.1 ClarityIQ technology (optional)

To create a breakthrough in interventional imaging and dose management, we evaluated the performance of the system as a whole instead of its individual components. During this process the entire digital imaging pipeline was redesigned, all relevant system components were improved and in total more than 500 parameters were clinically fine-tuned.

1. Powerful image processing technology ClarityIQ technology includes state-of-the-art, realtime image processing developed by Philips Research and based on the latest parallel computing technologies. Benefits include:

live images.

2. Flexible digital imaging pipeline ClarityIQ technology utilizes a flexible digital imaging pipeline from tube to display that is tailored for each and every application area such as cardio or neuro. This gives the flexibility to select virtually unlimited application specific configurations and obtain superb images on your full range of clinical applications and patient types including patients with a high BMI.

3. �More than 500 clinically fine-tuned system parameters and enhanced relevant system components across the entire imaging chain With ClarityIQ technology over 500 system parameters are fine-tuned for each application area; the result of years of Philips’ clinical leadership. ClarityIQ technology also enhances some essential system components. It is now possible to manage radiation by increased filtering, use small focal spot sizes as well as shorter pulses with the grid switching technology of Philips MRC tube and accompanying generator.

4.2 User Quality Control Mode (optional)

With this option, you can independently verify and audit the radiation and image quality related factors of your Azurion system in a standardized way in just 5 minutes.* It is designed to help you easily and independently perform periodic quality verifications to identify trends and potential deviations from the norm, and maintain high quality performance.

4.3 Dynamic Flat Detector

The dynamic Flat Detector of Philips provides excellent image quality.

Specifications Size of detector housing 63 cm (24.8 inch) diagonal, including BodyGuard

Maximum field of view 48 cm (18.9 inch) diagonal

X-ray sensitive area 1904 x 2586 pixels

Detector zoom fields 48, 42, 37, 31, 27, 22, 19, 15 cm (19, 17, 14.4, 13,10.5, 8, 7, 6 inch) diagonal square formats

Pixel pitch 154 μm x 154 μm

Detector bit depth 16 bits

Nyquist frequency 3.25 lp/mm

DQE (0) 77% at 0 lp/mm

MTF at 1 lp/mm** 59% (typical)

Azurion X-ray suites are equipped with compact dynamic flat detectors which can easily handle complex projections.

Image quality and X-ray dose management are further enhanced by dedicated image processing.

Philips DoseWise program is a set of techniques, programs and practices built into the X-ray system that allows excellent image quality during each interventional application, while at the same time managing x-ray dose at every opportunity.

DoseWise features include User Quality Control Mode (optional)

Zero dose positioning

* �The related tests were performed by three users with different background and experience level.

The test timings were performed using a frontal plane of an Azurion biplane R2.1 system

** According to IEC 62220-1-3, at highest gain

20 21

4.4 Fluoroscopy

Per application, three fluoro modes are available at tableside which can be programmed via settings. Each mode can be programmed with a different composition of ClarityIQ parameters. ClarityIQ technology provides a flexible digital image pipeline, powerful image processing technology and clinically fine-tuned parameters across the entire imaging chain.

Specifications Extra pre-filtration SpectraBeam filters: 0.2, 0.5 and 1.0 mm copper equivalent

Fluoroscopy image processing Recursive filtering, localized contrastadaptive contour enhancement, SPIRIT filters and Xres algorithm

Pulse rates 0.5, 1, 3.75, 7.5, 15 and 30 pulses per second (non Clarity)

0.625, 1.25, 2.5, 3.125, 6.25, 12.5 and 25 pulses per second (ClarityIQ - Optional)

Frame grabbing of static fluoroscopy images

Yes

Fluoroscopy storage Fluoro storage to record fluoroscopy up to 2000 images

Grid-switched pulsed fluoroscopy Yes

4.5 Digital Acquisition

The system can be customized with a virtually unlimited number of acquisition programs for digital angiography and digital subtraction angiography. Xres is a real-time processing algorithm that provides excellent image quality through enhanced contrast and sharpness. It exploits the benefits of the fully digital detector to reduce noise in clinical images.

Specifications Standard configuration image storage

0,5 to 6 images/sec

50.000 images (based on 1k2)

Storage extension (optional) 100.000 images (based on 1k2)

Optional

Image Processing ClarityIQ

QA

Rotational Angio CardiacSwing Physio Viewing Bolus Chase Subtract Bolus Chase Reconstruction Image rate 25/30 images/sec Image rate 50/60 images/sec SmartMask Dual Fluoro Data integrity

UPS

22 23

24" LCD CR

Active screen size (diagonal) 598.6 mm (23.6")

Active screen size (H x V) 527 mm x 296 mm (20.75 inch x 11.54 inch)

Resolution 2MP (1920 x 1080)

Wide viewing angle Yes (approximately 178°)

Maximum Luminescence 400 cd/m2 typical

DICOM calibrated luminescence

350 cd/m2

Contrast ratio 1000:1 typical, 700:1 minimum

Tilt +5°/+20°

FlexVision Pro (option) With FlexVision Pro, user can control FlexVision XL and video sources on FlexVision XL through wireless mouse in examination room as well as virtual keyboard and touchpad on the touch screen module in the examination room.

An operator can resize images and adjust the screen layout during the procedure without going into configuration.

27" LCD ER

Size 27 inch high brightness color TFT-LCD display

Format Native format 1920x1080 Full HD

Grey-scale resolution 10 bit gray-scale resolution with gray-scale correction

Wide viewing angle Wide viewing angle (approx. 178 degrees)

High Brightness High brightness (max 650 Cd/m2, default 400 Cd/m2)

Luminance stability Long term luminance stability through backlight stabilization circuit

Brightness control Automatic brightness control with backlight sensor

Control functions Control functions on side

Setting User programmable and standard reference setting

On-screen display Yes

Lookup table Internal selectable lookup table for gray-scale transfer function, including DICOM

Power supply Internal power supply (100-240 VAC)

Integrated LCD projection screen

Yes

5.1 Monitors

The system is delivered standard with one 27" LCD monitor for live and reference signal.

The monitor is mounted on the Philips Monitor Ceiling Suspension including motorized height adjustment. Two 24" LCD color monitors with parallel working are standard in the control room.

27" LCD Monitor ER and 24" LCD Monitor CR Format Native Format 1920 x 1080

Wide viewing angle Yes (approximately 178°)

High brightness Default controlled brightness

Video signal Compatible with video signals up to 1920x1200 and from Ultrasound and IVUS

5 Viewing Optional monitors

FlexVision XL Size 58-inch, 8 Megapixel color LCD

Format Native resolution: 3840x2160

High Brightness Max: 700 Cd/m2 (typical) stabilized: 400 Cd/m2

Contrast ratio 1:4000 (typical)

Wide viewing angle Approx. 176 degrees

Stabilization control Constant brightness stabilization control

Lookup table Lookup tables for gray-scale, color and DICOM transfer function

Protection screen Full protective screen Ingress Protection: IP-21

FlexVision XL

FlexVision XL FlexVision XL is a viewing concept that provides outstanding viewing flexibility, using a large, high definition LCD screen, it allows you to display multiple images in a variety of layouts - each tailored for your specific procedure. The SuperZoom feature lets you enlarge small details of anatomy, devices and data (ECG signals and hemodynamic data) for excellent visibility for confident decisions during challenging procedures.

24 25

6 Additional options

Subtracted Bolus Chase

CO2 View Trace

IntelliSpace Portal

CX50

EPIQ

EchoNavigator

DoseAware

Ambient Experience

DVD writer

CardiacSwing

Rotational Angio

Philips Interventional Hemodynamic system

IntraSight - fully integrated with Azurion

SyncVision

2D Quantification packages

Quantitative Coronary Analysis (QCA)

Left Ventricular Analysis (LVA)

Right Ventricular Analysis (RVA)

Quantitative Vascular Analysis (QVA)

QA Basic measurements

General additional options

FlexSpot Size 27 inch color TFT-LCD display

Format Native format 2560x1440 Quad HD

High Brightness High brightness (max 500 Cd/m2, default 350 Cd/m2)

Wide viewing angle Wide viewing angle (approx. 178 degrees)

Luminance stability Long term luminance stability through backlight stabilization circuit

Brightness control Automatic brightness control with backlight sensor

Control functions Control functions on side

Setting User programmable and standard reference setting

On-screen display Yes

Lookup table Internal selectable lookup table for gray-scale transfer function, including DICOM

Power supply Internal power supply (100-240 VAC)

Connectivity Integrated USB hub

2nd display for FlexSpot This feature adds a second high resolution Quad HD (2560x1440) monitor to the primary FlexSpot workspot. It enables the user to show up to 8 video sources on a single FlexSpot workspot by combining 2 high resolution displays. Keyboard and mouse control is seamless across the 2 displays.

Additional FlexSpot This feature adds a second FlexSpot workspot with its own high resolution Quad HD (2560x1440) display as well as its own keyboard and mouse.

Switchable Monitors The Switchable Monitor option gives you full control of what you display and where you display it on your exam room monitors. Display up to 16 monitor inputs via the touch screen module (TSM), including the live and reference image, frontal and lateral projections, hemo data and equipment from other vendors.

Optional viewing MultiSwitch (control room)

MultiVision (exam room)

Optional ref monoplane

FlexSpot

Additional FlexSpot and 2nd display

Optional monitors in control room

FlexSpot Integrated work spot in the control room to view, control and manipulate all applications within a single view

900 mm (41,34")

1670 mm (65.80") 460 mm (18.12")

1065 mm (41.96")

FlexMove 2900mm (min.) and 3100 mm (max.)

(114.26" or 122.05")

26 27

Front view FlexArm

Front view FlexMove

900 mm (35.43")

1670 mm (65.80") m m

(4 1.

2700 or 2900 mm (106.38 or 114.26")

900 mm (35.43")

1350 mm (53.15") 460 mm (18.12")

1511 mm (59.49") m m

(4 4.

Preferred 2900 mm (114.26") Minimum 2300 mm (90.55")

1687 mm (66.42")

900 mm (35.43")

1065 mm (41.93") o r 2 m m

(1

.3 or

.2

6"

7 Front views

Front view floor mounted

Front view ceiling mounted

How to reach us Please visit www.philips.com healthcare@philips.com

© 2021 Koninklijke Philips N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.

4522 991 74201 * Dec 2021