Plumbing Cut Sheets.pdf

800.428.4065 | www.willoughby-ind.com

Designed specifically for bariatric patients in healthcare environments.

Floor-mounted pedestal Constructed of welded Type 304 stainless steel with eight decorative overlay choices.

Aquasurf® durability Our sanitary solid surface lavatory is cast as a one-piece fixture that is easily cleaned, maintained, and repaired.

Faucet choices Choose either wrist handle or infrared operation.

ADA

Compliant

Finally, an aesthetically pleasing lavatory that is consistent with FGI’s Guidelines for Design of Construction of Health Care Facilities and provides a 1,000 lb. weight rating to properly serve bariatric patients.

Bariatric Lavatory BariatricBariatric LavatoryLavatory

WILLOUGHBY 3123 SERIES

REVIT details available at www.willoughby-ind.com

Willoughby Bariatric Lavatory BHS-3123

Lavatory Deck Color Options Side Panel Color Options

Willoughby Industries, Inc. reserves the right to make changes without notice in design, specifications, and models. © Willoughby Industries, Inc., All rights reserved.

Willoughby Industries, Inc.

5105 West 78th Street, Indianapolis, IN 46268

800.428.4065 | fax 317.875.0837 www.willoughby-ind.com

Technical Specification: Model BHS-3123 Standard ....... 31" wide x 22.625" deep x 44.75" tall

REVIT details available at www.willoughby-ind.com

Cabinet

• Constructed of solid marine-grade high-density polyethylene, not laminate

• Optional thermo-foil wrapped simulated wood grain limits exposed seams

Pedestal

• Constructed of welded Type 304 stainless steel for strength and rigidity

Controls

• Wrist handle or infrared style faucet available

MADE

IN THE

USA

Arctic White

Sea Foam

SanShade White White

Kasei Maple*

Majestic Walnut*

Amati Walnut*

Sandstone

Grey Granite

Bone

Glacier White

Red Coral

Nocturnal Blue

White GraniteBlack Granite

Sea Green

*Premium finishes

ADA

Compliant

Lavatory Deck

• Aesthetically pleasing sanitary

Aquasurf® solid surface material

• Integrated lavatory bowl

• Increased surface area

• Large 6" deep, D-shaped bowl

1,000 lb. weight rating*

* Engineered to withstand up to 1000 lb.

vertical load at the front of the lavatory deck.

Rev. 3/2015

Installation & Operation Manual

Willoughby Industries, Inc.

5105 West 78th Street Indianapolis, IN 46268 Toll Free: (800) 428-4065 Local: (317) 875-0830 Fax: (317) 875-0837 www.willoughby-ind.com MADE IN THE U.S.A.

Table of Contents Pre-Installation Information Physical Dimensions Rough-In Dimensions Mounting Dimensions Checking Contents Required Installation Supplies Parts List/Hardware Identifi cation Installation Instructions

Step 1: Pedestal Mounting Step 2: Drain Assembly #320014 Step 3: Basin and Pedestal Assembly Step 4: Final Assembly

Adjustable Mixing Valve Installation Care and Maintenance Drawing

Exploded-view Detail and BOM Warranty

BHS-3123 Series

Bariatric Lavatory

BHS-3123

Page 2Rev. 3/2015 www.willoughby-ind.com

Installation & Operation Manual Bariatric Lavatory BHS-3123 Series

Willoughby Industries, Inc. TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837

(Page left intentionally blank)

Page 3Rev. 3/2015 www.willoughby-ind.com

Bariatric Lavatory BHS-3123 Series

Willoughby Industries, Inc. TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837

Pre-Installation Information

Installation notice!

Check Rough-In location PRIOR to installation

Flush lines thoroughly PRIOR to hook-up

When installing the Willoughby Industries' BHS-3123 Series Bariatric Lavatory deck systems:

Before Step 1 of the installation instructions, ensure that the rough-ins are in the correct location.

The valve assembly, including the spray head, MUST NOT BE connected until after all lines have been fl ushed to remove the small particles of debris that are inherent with new construction projects and all chemicals that are used in fl ushing are purged from the system.

Chemicals used in fl ushing plumbing systems can attack the internal components of the valve and spray head and can severely damage them, so any fl ushing of the system must be followed by a full fl ushing with pure water to clear any harsh chemicals remaining in the system. Debris in the system, if allowed to enter the valve assembly or spray head, can cause poor performance or outright failure.

Again, DO NOTattempt to connect the valve assembly and spray head until after all the fl ushing is complete and pure water is the only media that will be passing through the system. Damage to the valve assembly or spray head caused by harsh chemicals or debris will not be covered by the manu-facturer’s warranty.

Installation notice!

Check Rough-In location PRIOR to installation

Flush lines thoroughly PRIOR to hook-up

Page 4Rev. 3/2015 www.willoughby-ind.com

Bariatric Lavatory BHS-3123 Series

Physical Dimensions- BHS-3123

Page 5Rev. 3/2015 www.willoughby-ind.com

Bariatric Lavatory BHS-3123 Series

Willoughby Industries, Inc. TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837

Rough-In Dimensions- BHS-3123 BHS-3123 Plumbing Rough-In Detail

Page 6Rev. 3/2015 www.willoughby-ind.com

Bariatric Lavatory BHS-3123 Series

Willoughby Industries, Inc. TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837

Mounting Dimensions- BHS-3123 BHS-3123 Mounting Details

Page 7Rev. 3/2015 www.willoughby-ind.com

Bariatric Lavatory BHS-3123 Series

Willoughby Industries, Inc. TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837

Check Contents

• Separate all parts from packaging and make sure all parts are accounted for before discarding any packaging material. If any parts are missing, do not attempt to install BHS-3123 Bariatric Lavatory until you obtain the missing parts.

NOTE: Before beginning installation, all supply, drain and waste piping for the BHS-3123 must be completed according to specifi ed rough-ins. If you have not received rough-in details, please contact Willoughby Industries, Inc. (800) 428-4065

� IMPORTANT: These installation instructions cover all of the Willoughby Industries Inc. BHS-3123 Bariatric Lavatory series. Simply omit the steps which do not apply to the model you are installing.

� IMPORTANT: Flush all the water supply lines before making connections.

Page 8Rev. 3/2015 www.willoughby-ind.com

Bariatric Lavatory BHS-3123 Series

Willoughby Industries, Inc. TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837

Required Installation Supplies

• Proper mounting hardware

• Hardware for waste oulet connections

• Gasket for waste outlet connection

• Shims (for toilet or cabinet installation if necessary)

• Supply piping

• Silicone caulk

• Plumbers putty

� WARNING: Willoughby Industries does not assume any responsibility for personal injury or damage to equipment due to an improperly installed BHS-3123 Bariatric Lavatory.

Page 9Rev. 3/2015 www.willoughby-ind.com

Bariatric Lavatory BHS-3123 Series

Parts List / Hardware Identifi cation

1/4-20 x 1/2"

PHILLIPS

TRUSS HEAD SCREW

800144

1/4-20 x 1" O.D.

FLAT WASHER

600650

1/4-20 x 1"

PHILLIPS

FLAT HEAD SCREW

800155

ITEM DESCRIPTION PART NUMBER

1 FAUCET 900215

2 LAVATORY BASIN BHS3123-XX*

3 DRAIN ASSEMBLY 320014

4 PEDESTAL ASSEMBLY S300833

5 FLAT WASHER, 1/4-20 X 1" O.D. 600650

6 1/4-20 X 1/2" PHILLIPS TRUSS HEAD SCREW 800144

7 STARBOARD PANEL KIT SB903123

8 1/4-20 X 1" PHILLIPS, FLAT HEAD 800155

9 TINNERMAN CLIP, 1/4-20 800113

*XX REPRESENTS THE LAVATORY COLOR

WHITE GRANITE=WG1

SAND STONE=SS1

GRAY GRANITE=GG1

BLACK GRANITE=BG1

SEA GREEN=SG1

NOCTURNAL BLUE=NB1

RED CORAL=RC1

GLACIER WHITE=GW1

BONE=BN1

1/4-20

TINNERMAN NUT

800113

Page 10Rev. 3/2015 www.willoughby-ind.com

Bariatric Lavatory BHS-3123 Series

Willoughby Industries, Inc. TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837

Installation Instructions Step 1: Pedestal Mounting Parts Supplied:

• Pedestal (pre-assembled)

Note: Hardware for fl oor & wall anchoring by others

1.) Place pedestal in position using pre-installed concrete fl oor anchors to locate.

2.) Assemble washers and nuts onto concrete fl oor anchors. Do not tighten yet.

3.) Ensure pedestal is level and that back of pedestal is fl ush with back wall.

4.) Tighten concrete fl oor anchor nuts.

5.) Secure pedestal to back wall using all thru holes (adequate mounting hardware and backing by others).

6.) Inspect installation ensuring fi xture is secured and level.

Note: Pedestal must be level for fi xture to drain properly.

Step 2: Drain Assembly #320014 Parts/Materials supplied:

• Solid Surface basin

• Drain assembly

1.) Insert drain spud into wash basin using plumbers putty (supplied by others).

2.) From beneath basin, thread the washers & locknut onto the drain spud and secure locknut against wash basin.

Page 11Rev. 3/2015 www.willoughby-ind.com

Bariatric Lavatory BHS-3123 Series

Willoughby Industries, Inc. TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837

Installation Instructions (cont.)

Step 3: Basin and Pedestal Assembly Caution: Do not leave basin on the pedestal unsupported, as it may fall and cause damage or personal injury.

1.) Line up the brass threaded inserts on the bottom of the basin with the 4 holes on the top of the pedestal, secure with (4) 1/4-20 x 1/2” truss head screws.

2.) Install (10) tinnerman clips in preparation for fi nal assembly.

(4) 1/4-20 X 1/2"

PHILLIPS TRUSS

HEAD SCREWS

(4) 1/4-20 x 1"

FLAT WASHERS

(10) 1/4-20

TINNERMAN CLIPS

Page 12Rev. 3/2015 www.willoughby-ind.com

Bariatric Lavatory BHS-3123 Series

Willoughby Industries, Inc. TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837

Installation Instructions (cont.)

Step 4: Final Assembly

1.) Install faucet (use instructions supplied with faucet).

2.) Make all fi nal plumbing connections to the drain and valve inlets.

3.) Test the system for leaks (both supply and waste).

4.) Place tinnerman nuts on the pedestal tabs.

5.) Set desired temperature with the adjustable mixing valve (see Page 13).

6.) Secure upper & lower panel with (10) 1” Phillips fl at head screws.

Page 13Rev. 3/2015 www.willoughby-ind.com

Bariatric Lavatory BHS-3123 Series

Willoughby Industries, Inc. TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837

Installation Instructions (cont.)

To Install

NOTE: Installation should be in accordance with accepted plumbing practices. Flush all piping thoroughly before installa-tion.

1. Locate a suitable place for the tempering valve. Valve should be accessible for service and adjustment and as close to the point-of-use as possible.

2. Connect hot and cold water to the supply valve using 1/2” NPT or 3/8” compression connections.

3. Connect outlet of tempering valve to fi xture(s) using 1/2”NPT or 3/8” compression connections.

4. Turn on hot and cold water supplies. If any leaks are observed, tighten connections as necessary to stop leaks before proceeding.

5. Turn on fi xture and allow water to fl ow for 2 minutes.

Measure water temperature at outlet. If water is not at desired temperature, adjust as necessary.

Specifi cations e480-00 .......................................................1/2" NPT (Rough Bronze) e480-01 .................................................... 1/2" NPT (Rough Chrome) e480-10 ...................................... 3/8"Compression (Rough Bronze) e480-11 ..................................... 3/8"Compression (Rough Chrome) Capacity: ................................................................. 4.0 gpm (15.0 l/m) Approach Temperature: ..........................5°F (2.8°C) above set pt.

Max. Operating Pressure: ......................................125psi (862 kpa) Max. Static Pressure: .............................................125psi (862 kpa) Max. Hot Water Temperature: ....................................180°F (82°C) Temp. Adjustment Range:

............................................ ASSE Type T/P: 95 – 110°F (43-48°C) ................................................. ASSE Type T: 80 – 120°F (27-49°C) Minimum Flow: ........................................................ 0.5 gpm (2.2 l/m) Checks: ......................................................................................Integral Construction: ........................................................... Cast Brass Body Certifi ed: ................................................................................CSA B125 Listing .....................................................ASSE 1016-1996 (Type T/P) .............................................................................................ASSE 1070

To Adjust Temperature

1. Loosen locknut.

2. Turn on fi xture and run water for at least two (2) minutes to allow supply temperature to stabilize.

3. Turn temperature stem counter-clockwise for hotter or clockwise for colder outlet temperature.

4. Tighten locknut to prevent accidental or unauthorized temperature adjustment.

5. Re-check outlet temperature.

Repair Kit

Motor Repair Kit ........................................................................480-270

HydroGuard® T/P Series e480 Lavatory Combination Valve

Installation Instructions

IS-P-e480

Figure 1

Figure 2: Typical Installation

Outlet

Hot Water Inlet

Temperature Adjustment Stem

Locknut Cold Water Inlet

Advanced Thermal Activation

Page 14Rev. 3/2015 www.willoughby-ind.com

Bariatric Lavatory BHS-3123 Series

Willoughby Industries, Inc. TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837

Care and Maintenance Solid Surface Care

Stainless Steel Care

Surfaces may be easily cleaned using conventional cleaning agents such as an ammonia based liquid cleaner, (glass cleaner).

Dry stains on a matte fi nish can be removed with a 3M Scotch-Brite gray scouring pad or a mild abrasive cleaner.

Burns or scorches can be removed by sanding with coarse grit sandpaper followed by fi ner grit (220) sandpaper. Follow sanding with a 3M Scotch-Brite gray pad (or equivalent) to match fi nish of sanding area to surrounding area. A fi nal buffi ng may be required on polished surfaces. Accidental nicks or chips can be repaired with special patch kits available in all colors.

Avoid exposing surfaces to strong chemicals such as acetone's; paint removers and sulfuric acid or hydrochloric chemical cleaners. Exposure to strong chemicals may result in permanent damage to surfaces.

Stainless Steels are basically alloys of iron and chromium and are corrosion resistant. Stainless steel has a bright surface that is easy to clean and is free from oxides. Therefore, cleaning of stainless steel is relatively simple and easy if done on a regular basis.

Frequency of cleaning should depend on the rate at which the fi xture becomes dirty. Remember that fresh (soft) deposits of all kinds are relatively easy to remove, while removing older (hard) deposits are much more diffi cult. Establish a cleaning SCHEDULE.

Routine cleaning should involve ordinary soap or detergent and water, applied with a sponge, brush or cloth. Baking soda, borax or any of several non-abrasive commercial cleansing agents can help hasten the cleaning action. after scrubbing, rinse THOROUGHLY and wipe dry.

DO NOT use common steel wool, scouring pads, scrapers, wire brushes, fi les or other steel tools to clean stainless steel. Such items will scratch the surface or leave small particles of iron imbedded in the surface, which will eventually rust and stain the surface - even appearing as if the stainless itself was rusting.

Certain chemical compounds, if used on stainless steel, can give the appearance of rust and if allowed to stand for long periods of time, can pit the surface of even stainless. Products containing hydrochloric acid, muriatic acid or potassium hydrochloride can ruin the surface.

Page 15Rev. 3/2015 www.willoughby-ind.com

Bariatric Lavatory BHS-3123 Series

Willoughby Industries, Inc. TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837

IT

E

M

P A

R T

D

E S

C R

IP

TI

O N

Q

TY

FA

U C

E T, W R

IS

TB

LA

D

E G

O O

S E

N E

C K

-3

/8

D R

A

IN

, O

FF

S E

T P

R O

D R

A

IN

-W C

S

LA

V

D E

C K

, B H

S -3

S

P E

D E

S

TA

L A

S S

E M

B

LY

, B A

R

IA

TR

IC

L A

V

B H

S -3

3)

1/ x

1" O

D F

LA

T

W A

S H

E R

1/

4-

X

/2 " P

H

IL

LI

P

S T

R U

S S

H E

A D

S C

R E

W

S

P

A N

E L, L E

FT

S

ID

E

, B A

R

IA

TR

IC

L A

V A

TO

R

Y

S

P

A N

E L, R

IG

H T

S

ID

E , B

A R

IA

TR

IC

L

A V

A

TO

R Y

TI

N N

E R

M A

N N

U T

1/ 4-

, S

/S

S

P

A N

E L, T O

P F

R O

N T, B A

R

IA

TR

IC

L A

V A

TO

R

Y

M A

C H

IN

E

S C

R E

W , F

LA

T

H E

A D

, 1 /4

-2 0x

1"

S

P A

N E

L, L

O W

E R

F R

O N

T, B

A R

IA

TR

IC

L

A V

A

TO

R Y

TR

B

TR

B

/1

5/

/1

5/

C

O F

ST

AN

D

AR

D

S

1:

P A

R T

B

H S

-3

B

A R

IA

TR

IC

L

A V

A

TO

R Y

A S

S E

M B

LY

S H

E E

T:

R

EV

O R

IG

R

EV

IS

IO

N

S C

A

LE

R

E F.

M A

T' L:

TI

TL

E / D

ES

C

W ill ou gh by

In du st ri es In c.

In di an ap ol is , I nd ia na

TO

LE

R

AN

C

ES

E

X C

E P

T A

S

N O

TE

D

P

LC

S

P

LC

S

FR

AC

TI

O

N S:

A N

G

LE

0.

0.

1/

A

SI

ZE

W

IL

LO

U

G H

BY

D R

AW

IN

G

Ex pl od ed

-v ie w D et ai l a nd

B O

M

Page 16Rev. 3/2015 www.willoughby-ind.com

Bariatric Lavatory BHS-3123 Series

Willoughby Industries, Inc. TOLL FREE (800) 428-4065 ● LOCAL (317) 875-0830 ● FAX (317) 875-0837

Warranty Solid surface products are a homogenous blend of resins, mineral fi ller and colorant manufactured for panels, molded and/or shaped products and components. Solid surface products provide a luxurious appearance with the durability od stain proof, impact resistant, burnresistant material with the ease of maintenance and cleaning.

Willoughby Industries, Inc. warrants to commercial and institutional purchasers only that each unit will be free from defects in workmanship and materials under normal use and service upon the following terms and conditions. The period during which components are warranted as follows:

1. Solid surface components are warranted for 2 years from date of shipment.

2. All other components warranted for 1 year from date of shipment.

This warranty does not cover installation or any other labor charges and does not apply to any components damaged by accident, abuse, improper installation or improper maintenance. This warranty does not cover any installation that did not comply with national, state and local building, plumbing or electrical codes. The warranty is limited to replacing or repairing at manufacturer's option, transportation charges prepaid by the purchaser, any component or part which upon our inspection shall be deemed as defective within the limitations of this warranty. The replacement or repair of defective units as stated in this warranty shall constitute the sole remedy of the purchaser and the sole liability of Willoughby Industries, Inc. Willoughby Industries, Inc. shall not otherwise be liable under any indirect damages caused by defects in the repair or replacement thereof.

This warranty only extends to commercial and industrial purchasers and does not extend to any others, including consumer customers of commercial institutional purchasers. This warranty is in lieu of all other warranties, expressed or implied, including implied warranty of merchantability or fi tness for a particular purpose or otherwise.

M37 © 2016 AS America Inc.

spec_0355-0356 Lucerne WallHung Lavs Rev. A 8/16

To Be Specified:

❏ Color: ❏ White ❏ Faucet*:

❏ Faucet Finish:

❏ Supplies:

❏ 1-1/4" Trap:

❏ Nipple:

❏ Bracket Support (by others):

❏ Concealed Arms Support (by others):

* See faucet section for additional models available

LUCERNE™

WALL-HUNG LAVATORY

VITREOUS CHINA

LUCERNE™ WALL-HUNG LAVATORY

back and side splash shields

(TAS) for children age group 13 and up

Faucet holes on 203mm (8") centers (Illus.):

concealed arms support ❏ 0356.915 For wall hanger (included) or concealed arms support

• Less overflow

Faucet holes on 102mm (4") centers:

concealed arms support ❏ 0355.912 For wall hanger (included) or concealed arms support

• Less overflow

Single center faucet hole (Illus.):

(not included) ❏ 0356.421 For wall hanger (included) or concealed arms support ❏ 0356.921 For wall hanger (included) or concealed arms support

concealed arms support

Nominal Dimensions:

Bowl sizes:

Compliance Certifications - Meets or Exceeds the Following Specifications:

SEE FOLLOWING PAGES FOR ROUGHING-IN DIMENSIONS

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE-

LINES AND ANSI A117.1 ACCESSIBLE AND USABLE

BUILDINGS AND FACILITIES - CHECK LOCAL CODES.

Top of front rim mounted 864mm (34") from finished floor.

0356.028

0356.041

BARRIER FREE

M38 © 2016 AS America Inc.

LUCERNE™

WALL-HUNG LAVATORY

VITREOUS CHINA

BARRIER FREE

102mm (4")

152mm (6")

152mm (6")

102mm (4")

86mm (3-3/8")

203mm (8")

8mm (5/16")

464mm (18-1/4")

521mm (20-1/2")

13mm (1/2")

FINISHED

WALL

FINISHED

WALL

(6) 25mm

(1") DIA.

ACCESS

HOLES

FOR

CONC.

ARMS

102mm (4") 25mm

(1")

79mm (3-1/8")

267mm (10-1/2")

425mm (16-3/4")

114mm (4-1/2")

44mm (1-3/4")

38mm (1-1/2") 10mm

(3/8")

DIA. ANCHOR

SCREW HOLES

203mm

(8")

SUPPLIES

AS REQUIRED

1-1/4" O.D. WASTE

OUTLET FOR

DRAIN PLUG

1-1/4" O.D. WASTE

OUTLET FOR

POP-UP DRAIN

27mm x 14mm (1-1/16 x 5/16")

SLOTS

S-9 HANGER

6m m (8

-1 /8

*26 0m m (1

0- 1/

4"

8m m (1

1- 3/

8"

2m m

(1 3-

7/ 8"

7m m

4m m

FINISHED

FLOOR

54mm (2-1/8") DIA.

HOLES FOR

CONCEALED ARMS

34" (864mm)

27" MIN.

(686mm)

18-1/4" (464mm)

8" MIN.

(203mm)

FINISHED

WALL

6" MAX.

(152mm)

9" MIN.

(229mm)BARRIER FREE

CLEARANCE

11" (279mm)

102mm (4")

152mm (6")

152 mm (6")

86mm (3-3/8")

203mm (8")

8mm (5/16")

464mm (18-1/4")

521mm (20-1/2")

13mm (1/2")

FINISHED

WALL

(6) 25mm

(1") DIA.

ACCESS

HOLES FOR

CONC. ARMS

102mm (4")

25mm (1")

79mm (3-1/8")

267mm (10-1/2")

425mm (16-3/4")

114mm (4-1/2")

44mm (1-3/4")

38mm (1-1/2")

10mm (3/8")

DIA. ANCHOR

SCREW HOLES

203mm

(8")

SUPPLIES

AS REQUIRED

1-1/4" O.D. WASTE

OUTLET FOR

DRAIN PLUG

1-1/4" O.D. WASTE

OUTLET FOR

POP-UP DRAIN

27mm X 14mm (1-1/16" x 5/16") SLOTS

S-9 HANGER

206mm (8-1/8")

*286mm (11-1/4")

298mm (11-3/8")*

352mm (13-7/8")*

787mm (31") 864mm (34")

FINISHED

FLOOR

54mm (2-1/8") DIA.

HOLES FOR

CONCEALED ARMS

203mm (8")

34" (864mm)

27" MIN.

(686mm)

18-1/4" (464mm)

8" MIN.

(203mm)

FINISHED

WALL

6" MAX.

(152mm)

9" MIN.

(229mm)BARRIER FREE

CLEARANCE

11" (279mm)

NOTES:

is assumed for use of superseded or voided pages.

LAVATORY DESIGNED TO MEET ADA HANDICAPPED GUIDELINES WITH MOUNTING HEIGHT

SET AT 864MM (34") ABOVE FINISHED FLOOR.

M39 © 2016 AS America Inc.

LUCERNE™

WALL-HUNG LAVATORY

VITREOUS CHINA

BARRIER FREE

102mm (4")

152mm (6")

152mm (6")

86mm (3-3/8")

203mm (8")

8mm (5/16")

464mm (18-1/4")

FINISHED

WALL

(6) 25mm (1") DIA.

ACCESS HOLES

FOR CONC. ARMS

25mm (1-3/8") DIA.

PUNCHING

521mm (20-1/2")

13mm (1/2")

44mm (1-3/4") DIA.

STD. OUTLET

102mm (4")

79mm (3-1/8")

425mm (16-3/4")

44mm (1-3/4")

38mm (1-1/2")

10mm (3/8")

DIA. ANCHOR

SCREW HOLES

206mm (8-1/8")

787mm (31") 864mm (34")

FINISHED

FLOOR

54mm (2-1/8") DIA.

HOLES FOR

CONCEALED ARMS25mm (1")

267mm (10-1/2")

114mm (4-1/2")

27mm X 14mm (1-1/16" x 5/16") SLOTS

S-9 HANGER

34" (864mm)

27" MIN.

(686mm)

18-1/4" (464mm)

8" MIN.

(203mm)

FINISHED

WALL

6" MAX.

(152mm)

9" MIN.

(229mm)BARRIER FREE

CLEARANCE

11" (279mm)

114mm (4-1/2")

86mm (3-3/8")

203mm (8")

8mm (5/16")

464mm (18-1/4")

521mm (20-1/2")

13mm (1/2")

FINISHED

WALL

425mm (16-3/4")

102mm (4")

13mm x 51mm BRACKET (1/2" x 2") SLOTS

349mm (13-3/4")

57mm (2-1/4")

44mm (1-3/4") DIA.

STD. OUTLET

25mm (1") DIA.

HOLES

35mm (1-3/8") DIA.

PUNCHING

102mm (4")

79mm (3-1/8")

425mm (16-3/4")

44mm (1-3/4")

38mm (1-1/2")

10mm (3/8")

DIA. ANCHOR

SCREW HOLES

206mm (8-1/8")

787mm (31") 864mm (34")

FINISHED

FLOOR

54mm (2-1/8") DIA.

HOLES FOR

CONCEALED ARMS

25mm (1")

267mm (10-1/2")

114mm (4-1/2")

27mm X 14mm (1-1/16" x 5/16") SLOTS

S-9 HANGER

34" (864mm)

27" MIN.

(686mm)

18-1/4" (464mm)

8" MIN.

(203mm)

FINISHED

WALL

6" MAX.

(152mm)

9" MIN.

(229mm)BARRIER FREE

CLEARANCE

11" (279mm)

NOTES:

is assumed for use of superseded or voided pages.

M37 © 2016 AS America Inc.

To Be Specified:

❏ Color: ❏ White ❏ Faucet*:

❏ Faucet Finish:

❏ Supplies:

❏ 1-1/4" Trap:

❏ Nipple:

❏ Bracket Support (by others):

❏ Concealed Arms Support (by others):

* See faucet section for additional models available

LUCERNE™

WALL-HUNG LAVATORY

VITREOUS CHINA

LUCERNE™ WALL-HUNG LAVATORY

back and side splash shields

(TAS) for children age group 13 and up

Faucet holes on 203mm (8") centers (Illus.):

concealed arms support ❏ 0356.915 For wall hanger (included) or concealed arms support

• Less overflow

Faucet holes on 102mm (4") centers:

concealed arms support ❏ 0355.912 For wall hanger (included) or concealed arms support

• Less overflow

Single center faucet hole (Illus.):

(not included) ❏ 0356.421 For wall hanger (included) or concealed arms support ❏ 0356.921 For wall hanger (included) or concealed arms support

concealed arms support

Nominal Dimensions:

Bowl sizes:

Compliance Certifications - Meets or Exceeds the Following Specifications:

SEE FOLLOWING PAGES FOR ROUGHING-IN DIMENSIONS

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE-

LINES AND ANSI A117.1 ACCESSIBLE AND USABLE

BUILDINGS AND FACILITIES - CHECK LOCAL CODES.

Top of front rim mounted 864mm (34") from finished floor.

0356.028

0356.041

BARRIER FREE

M38 © 2016 AS America Inc.

LUCERNE™

WALL-HUNG LAVATORY

VITREOUS CHINA

BARRIER FREE

102mm (4")

152mm (6")

152mm (6")

102mm (4")

86mm (3-3/8")

203mm (8")

8mm (5/16")

464mm (18-1/4")

521mm (20-1/2")

13mm (1/2")

FINISHED

WALL

FINISHED

WALL

(6) 25mm

(1") DIA.

ACCESS

HOLES

FOR

CONC.

ARMS

102mm (4") 25mm

(1")

79mm (3-1/8")

267mm (10-1/2")

425mm (16-3/4")

114mm (4-1/2")

44mm (1-3/4")

38mm (1-1/2") 10mm

(3/8")

DIA. ANCHOR

SCREW HOLES

203mm

(8")

SUPPLIES

AS REQUIRED

1-1/4" O.D. WASTE

OUTLET FOR

DRAIN PLUG

1-1/4" O.D. WASTE

OUTLET FOR

POP-UP DRAIN

27mm x 14mm (1-1/16 x 5/16")

SLOTS

S-9 HANGER

6m m (8

-1 /8

*26 0m m (1

0- 1/

4"

8m m (1

1- 3/

8"

2m m

(1 3-

7/ 8"

7m m

4m m

FINISHED

FLOOR

54mm (2-1/8") DIA.

HOLES FOR

CONCEALED ARMS

34" (864mm)

27" MIN.

(686mm)

18-1/4" (464mm)

8" MIN.

(203mm)

FINISHED

WALL

6" MAX.

(152mm)

9" MIN.

(229mm)BARRIER FREE

CLEARANCE

11" (279mm)

102mm (4")

152mm (6")

152 mm (6")

86mm (3-3/8")

203mm (8")

8mm (5/16")

464mm (18-1/4")

521mm (20-1/2")

13mm (1/2")

FINISHED

WALL

(6) 25mm

(1") DIA.

ACCESS

HOLES FOR

CONC. ARMS

102mm (4")

25mm (1")

79mm (3-1/8")

267mm (10-1/2")

425mm (16-3/4")

114mm (4-1/2")

44mm (1-3/4")

38mm (1-1/2")

10mm (3/8")

DIA. ANCHOR

SCREW HOLES

203mm

(8")

SUPPLIES

AS REQUIRED

1-1/4" O.D. WASTE

OUTLET FOR

DRAIN PLUG

1-1/4" O.D. WASTE

OUTLET FOR

POP-UP DRAIN

27mm X 14mm (1-1/16" x 5/16") SLOTS

S-9 HANGER

206mm (8-1/8")

*286mm (11-1/4")

298mm (11-3/8")*

352mm (13-7/8")*

787mm (31") 864mm (34")

FINISHED

FLOOR

54mm (2-1/8") DIA.

HOLES FOR

CONCEALED ARMS

203mm (8")

34" (864mm)

27" MIN.

(686mm)

18-1/4" (464mm)

8" MIN.

(203mm)

FINISHED

WALL

6" MAX.

(152mm)

9" MIN.

(229mm)BARRIER FREE

CLEARANCE

11" (279mm)

NOTES:

is assumed for use of superseded or voided pages.

M39 © 2016 AS America Inc.

LUCERNE™

WALL-HUNG LAVATORY

VITREOUS CHINA

BARRIER FREE

102mm (4")

152mm (6")

152mm (6")

86mm (3-3/8")

203mm (8")

8mm (5/16")

464mm (18-1/4")

FINISHED

WALL

(6) 25mm (1") DIA.

ACCESS HOLES

FOR CONC. ARMS

25mm (1-3/8") DIA.

PUNCHING

521mm (20-1/2")

13mm (1/2")

44mm (1-3/4") DIA.

STD. OUTLET

102mm (4")

79mm (3-1/8")

425mm (16-3/4")

44mm (1-3/4")

38mm (1-1/2")

10mm (3/8")

DIA. ANCHOR

SCREW HOLES

206mm (8-1/8")

787mm (31") 864mm (34")

FINISHED

FLOOR

54mm (2-1/8") DIA.

HOLES FOR

CONCEALED ARMS25mm (1")

267mm (10-1/2")

114mm (4-1/2")

27mm X 14mm (1-1/16" x 5/16") SLOTS

S-9 HANGER

34" (864mm)

27" MIN.

(686mm)

18-1/4" (464mm)

8" MIN.

(203mm)

FINISHED

WALL

6" MAX.

(152mm)

9" MIN.

(229mm)BARRIER FREE

CLEARANCE

11" (279mm)

114mm (4-1/2")

86mm (3-3/8")

203mm (8")

8mm (5/16")

464mm (18-1/4")

521mm (20-1/2")

13mm (1/2")

FINISHED

WALL

425mm (16-3/4")

102mm (4")

13mm x 51mm BRACKET (1/2" x 2") SLOTS

349mm (13-3/4")

57mm (2-1/4")

44mm (1-3/4") DIA.

STD. OUTLET

25mm (1") DIA.

HOLES

35mm (1-3/8") DIA.

PUNCHING

102mm (4")

79mm (3-1/8")

425mm (16-3/4")

44mm (1-3/4")

38mm (1-1/2")

10mm (3/8")

DIA. ANCHOR

SCREW HOLES

206mm (8-1/8")

787mm (31") 864mm (34")

FINISHED

FLOOR

54mm (2-1/8") DIA.

HOLES FOR

CONCEALED ARMS

25mm (1")

267mm (10-1/2")

114mm (4-1/2")

27mm X 14mm (1-1/16" x 5/16") SLOTS

S-9 HANGER

34" (864mm)

27" MIN.

(686mm)

18-1/4" (464mm)

8" MIN.

(203mm)

FINISHED

WALL

6" MAX.

(152mm)

9" MIN.

(229mm)BARRIER FREE

CLEARANCE

11" (279mm)

NOTES:

is assumed for use of superseded or voided pages.

© 2019 AS America Inc. 4/19

MONTERREY® 0.5 GPM

TWO-HANDLE 8" WIDESPREAD LAVATORY FAUCET

RIGID/SWIVEL GOOSENECK SPOUT WITH 5" REACH

MODEL NUMBER:

❏ 6540.175 Widespread Lavatory

0.5 gpm Pressure Compensating Vandal-Resistant Spray.

Convertible rigid/swivel gooseneck spout. Vandal-Resistant Wrist Blade Handles. LESS drain and pop-up hole.

❏ 6540.145 Widespread Lavatory

0.5 gpm Pressure Compensating Vandal-Resistant Spray.

Convertible rigid/swivel gooseneck spout. Vandal-Resistant Lever Handles. LESS drain and pop-up hole.

GENERAL DESCRIPTION:

Durable cast brass construction. Cast brass valve bodies with 8" rigid copper connection with compression fittings.

1/2" male threaded inlet shanks with brass coupling nuts.

1/4 turn ceramic disc valve cartridges. Convertible rigid/ swivel spout. Choice of Vandal-Resistant Lever or Wrist Blade handles with blue & red color indexes.

0.5 gpm/1.9 L/min. maximum flow rate.

PRODUCT FEATURES:

Pressure Compensating Multi-Laminar Spray: Provides a constant water flow of 0.5 gpm throughout the pressure range.

Solid Brass Construction: Durable - Excellent in high use applications. Ideal for prolonged contact with water.

Ceramic Disc Valve Cartridge: Assures a lifetime of drip-free performance.

Field-Convertible Rigid/Swivel Spout: Easily converted in the field.

Lead Free: Faucet contains ≤ 0.25% total lead content by weighted average.

SUGGESTED SPECIFICATION

Two-handle widespread lavatory faucet shall feature cast brass valve bodies with 8" rigid copper connection. Shall feature water-conserving vandal-resistant 0.5 gpm/1.9 L/min. pressure compensating spray. Vandal-Resistant handles. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Shall also feature convertible rigid/swivel spout. Fitting shall be American Standard Model # 6540.1_5.002.

6540.175 Shown

35 mm

(1-3/8") DIA.

MOUNTING

HOLES

1/2" NPSM

38 mm

(1-1/2") MAX.

203 mm (8")

400 mm (15-3/4")98 mm

(3-7/8") 165 mm (6-1/2")

127 mm (5")

270 mm (10-5/8")

89 mm (3-1/2")

51mm

(2") DIA.

TYP.

57 mm (2-1/4")

Lever Handle

4/19

MONTERREY® 0.5 GPM

TWO-HANDLE 8" WIDESPREAD LAVATORY FAUCET

RIGID/SWIVEL GOOSENECK SPOUT WITH 5" REACH

© 2019 AS America Inc.

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ANSI 117.1

ASME A112.18.1

CSA B125.1

NSF 372

Product Number Description

Finish

Polished Chrome

6540.175 Widespread Lavatory with convertible rigid/swivel gooseneck spout. 0.5 gpm/1.9 L/min pressure compensating vandal-resistant multi-laminar spray. Vandal-Resistant Wrist Blade Handles. LESS drain and pop-up hole.

6540.145 Widespread Lavatory with convertible rigid/swivel gooseneck spout. 0.5 gpm/1.9 L/min pressure compensating vandal-resistant multi-laminar spray. Vandal-Resistant Lever Handles. LESS drain and pop-up hole.

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for accessible and usable building facilities - check local codes

FLOW RATE*

G A

L

LO

N S

P E

R M

IN

U

T E

I N L E T P R E S S U R E ( P S I ) *Flow rates shown are for mixed hot and cold.

0.0

0.1

0.2

0.3

0.4

0.5

80604020

8/18© 2018 AS America Inc.

NEXTGENTM SELECTRONIC®

INTEGRATED PROXIMITY LAVATORY FAUCET

SMARTHERM® SAFETY SHUT-OFF & ABOVE DECK MIXING, BASE MODEL

MODEL NUMBER:

■ BASE UNIT (Does not include power supply)

❑ 775B.303 0.35 gpm pressure compensating, vandal-resistant multi-laminar spray.

❑ 775B.305 0.5 gpm pressure compensating, vandal-resistant multi-laminar spray.

❑ 775B.315 1.5 gpm pressure compensating, vandal-resistant laminar flow outlet with adjustable face.

■ POWER KITS (Must be purchased separately)

❑ PK00.WRK PWRX™ 10-Year battery pack and holder

❑ PK00.PAC Plug-In AC power supply and Single AC adapter

❑ PK00.HAC Hard-Wired AC power supply and 10' extension cable

❑ PK00.MAC Multi-AC adapter and 10" extension cable

■ OPTIONAL Battery Back-up

❑ PK00.BBU Allows AC powered faucets to continuously operate during a power failure.

■ OPTIONAL 4" and 8" Deck Plates

❑ 775P.400 4" metal deck plate with 1/4" fixation studs and quick spin nuts. Includes fixation screw that prevents the spout from rotating.

❑ 775P.800 8" metal deck plate with 1/4" fixation studs and quick spin nuts. Includes fixation screw that prevents the spout from rotating.

■ OPTIONAL Remote Control

❑ 605XRCT Remote control adjusts setup parameters and allows for customization of functions. Can be used to program all Selectronic faucets and flush valves.

PWRX® BATTERY SYSTEM

• PWRX® Battery Life: 13 years @ 4,000 uses per month.

• Reduces the downtime and maintenance costs associated with changing batteries.

AC TRANSFORMERS

• UL 1310, Class 2 certified.

• Can run up to 15 faucets and/or flush valves at a time.

FEATURES:

• SmarTherm® Safety Shut-Off: Integral thermostatic hot water temperature limiter meets ASSE 1070 without a separate thermostatic mixing valve.

• Above-Deck Mixing: Allows user to manually adjust temperature. Adjustable hot limit stop. Red & blue indicators.

• Removable Mixing Handle: Installer can set temperature and remove handle to prevent user adjustment. Cover plug included.

• Dual Inlets: For hot and cold water. Check valves included to prevent cross flow. Filter assemblies protect the solenoid valve from debris.

• Hygienic, touch-free operation

• Clean, Integrated Design: All electronics contained in faucet spout. No control box below deck.

• Easy Installation & Maintenance: Faucet installs from the top.

All serviceable parts are easily accessible.

• Flexible Selectronic® Platform with programmable sensor and interchangeable power supplies.

• Self-Cleaning Solenoid Reduces Maintenance: Integral wiper spring prevents clogging and run-on. Silicon seals.

• Adjustable Range: Detection zone can be adjusted manually or with optional remote control.

• Fail-Safe: Faucet automatically shuts off upon loss of power or dead battery. No reset required.

• Optional Remote Control Allows for Customization

- Auto Purge: Periodically purges stagnant water from faucet and supply lines. Frequency and duration are adjustable.

- Safety Timer: Turns water off if the sensor is blocked for 55 seconds. Timing is adjustable.

• Lead-Free: Faucet contains ≤ 0.25% total lead content by weighted average.weighted average.

RECOMMENDED SPECIFICATION:

Electronic, sensor-operated lavatory faucet shall feature a programmable sensor and an electronically operated self-cleaning solenoid valve with chemical resistant silicon seals. Integrated design with all electronics enclosed in the spout. Faucet meets ASSE 1070 without a separate thermostatic mixing valve. Features an above deck mixing handle with hot limit safety stop and red / blue indicators. Shall also feature a vandal resistant metal body with single-post mounting. Shall meet ANSI A112.18.1, ANSI 117.1 and ASSE 1070 codes.

Model shall be American Standard # 775B.30__.002

8/18

NEXTGENTM SELECTRONIC®

INTEGRATED PROXIMITY LAVATORY FAUCET

SMARTHERM® SAFETY SHUT-OFF & ABOVE DECK MIXING, BASE MODEL

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ANSI A117.1

ASME A112.18.1

CSA B 125

NSF 372

ASSE 1070-2015

NSF 61

© 2018 AS America Inc.

FLOW RATE*

G A

L

LO

N S

P E

R M

IN

U

T E

I N L E T P R E S S U R E ( P S I )

0.0

0.5

1.0

1.5

2.0

0.0

0.1

0.2

0.3

0.4

100806040

1.5 gpm

0.5 gpm

FLOW RATE*

G A

L

LO

N S

P E

R M

IN

U

T E

I N L E T P R E S S U R E ( P S I )

0.35 gpm

80604020

MEETS THE AMERICAN DISABILITIES ACT GUIDELINES AND

ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND

USABLE BUILDING FACILITIES-CHECK LOCAL CODES

174 mm (6-7/8")

125 mm (4-15/16")

126 mm (5")

38 mm (1-1/2")

146 mm (5-3/4")

597 mm (23-1/2")

48 mm (1-7/8")

28 mm (1-1/8")

3/8" COMPRESSION

CONNECTOR

61 mm (2-7/16")

39 mm (1-1/2")

FINISHES:

Polished Chrome .002

Brushed Nickel .295

DESCRIPTION:

Deck-mount electronic faucet with proximity operation. Integrated design with sensor, solenoid valve and electronics enclosed in the spout.

Integral thermostatic hot water temperature limiter is ASSE 1070 certified. Above-deck mixing with hot limit safety stop and red / blue indicators. Water pressure range from 20 - 120 psi. Vandal-resistant single-post mounting. Dual inlets for hot and cold water. Pre-installed 24" flexible inlet hoses with filter assembly and 3/8" compression fitting.

Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice

SPECIFICATION SHEET

TAG _______

* Regularly furnished unless otherwise specified.

Zurn Industries, LLC | Specification Drainage Operation 1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax 814-454-7929

In Canada | Zurn Industries Limited 3544 Nashua Drive, Mississauga, Ontario L4V 1L2 · Ph. 905-405-8272, Fax 905-405-1292 www.zurn.com

Rev. J Date: 09/27/2017 C.N. No. 137983 Prod. | Dwg. No. Z1231

Z1231

CONCEALED ARM SYSTEM

WALL LAVATORIES

OPTIONS (Check/specify appropriate options)

PREFIXES

____ Z Dura-Coated System with Concealed Arms*

SUFFIXES

____ -AL Adapter Lug

____ -CB Carrier Bank

____ -D Back to Back System

____ -E2 Concealed Arm Escutcheons 2 [51] Long

____ -SL Sleeve Length Over 4 [102] (Specify Length)

____ -WS Wall Support Valve Plate (Specify Knee or Foot action, Valve Name, and Number)

____ -79 ADA Rough-in

Product No.

Approx.

Wt. Lbs.

[kg]

Z1231 45 [20]

ENGINEERING SPECIFICATION: ZURN Z1231

Lavatory support system with concealed arms. Complete with Dura-Coated rectangular steel uprights with welded feet, cast iron adjustable headers, concealed arms, steel sleeves, alignment truss, and mounting fasteners.

© 2020 AS America Inc. 6/20

Commercial Shower System Trim Kit For Flash Rough Shower Valve

2.5 GPM with Hand Shower

MODEL NUMBER:

❏ TU662.221 Commercial Shower System Kit

In cludes:

• Reliant3 Valve Only Trim TU385500WD **

- Includes Pressure Balance Cartridge

• 3-Function Hand Shower 1660.767 with non-positive shut-off

• In-Line Vacuum Breaker 1660.400

• 59" Metal Hose 8888.035

• Wall Supply 8888.037

• 36" Slide Bar 1660.236

** Flash rough-in valve must be purchased separately

PRESSURE BALANCE CARTRIDGE:

One-Piece Cartridge: Simplifies installation and maintenance.

Double Ceramic Pressure Balance Cartridge:

Combination of ceramic disc mixing valve and a ceramic balancing spool.

Ceramic Disc Mixing Valve: Assures a lifetime of drip-free performance and smooth handle operation.

Ceramic Balancing Spool: Maintains a constant output temperature in response to changes in relative hot and cold supply pressure. Ceramic material is unaffected by mineral deposits and harsh water conditions.

Integrated Check Valves: Engineered to eliminate cross flow.

Adjustable Hot Limit Safety Stop: Limits the amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding.

Comfort Zone: Offers a wider range to fine tune the desired temperature.

Back-to-Back Capability: Hot and cold can be reversed quickly and easily.

Trim Kit: Metal escutcheon with metal lever. Red / blue indicator ring.

HAND SHOWER WITH PAUSE FEATURE:

ADA-Compliant: Non-positive shut-off button on handle reduces flow to a trickle.

36" SLIDE BAR:

Simple Height Adjustment: Allows positioning of the hand shower anywhere along the bar.

NOT DESIGNED TO BE A GRAB BAR.

FLOW RATE

G A

L

LO

N S

P E

R M

IN

U

T E

I N L E T P R E S S U R E ( P S I )

10080604020

GENERAL DESCRIPTION:

Commercial shower system trim kit includes metal valve trim, wall supply (with 1/2" NPT female inlet and 1/2" NPSM male outlet), a 59" (1500 mm) metal shower hose, vacuum breaker, a 3-function hand shower with non-positive shut-off and a 36" slide bar. One-piece double ceramic pressure balance cartridge maintains a constant output temperature in response to changes in relative hot and cold supply pressure. Integral check valves prevent cross flow.

Adjustable hot limit safety stop. Back-to-back capable.

Durable valve trim with metal handle and escutcheon.

Slide bar features an adjustable hand shower holder which can be set at any height or position along the tbar and angle up to 45 .̊ 2.5 gpm/9.5 L/min.

SUGGESTED SPECIFICATION

Commercial shower system trim kit shall feature metal valve trim, wall supply (with 1/2" NPT female inlet and 1/2" NPSM male outlet), 59" metal hose, vacuum breaker, 2.5 gpm/9.5 L/min. 3-function hand shower with non-positive shut-off and a 36" slide bar. Shall also feature one-piece double ceramic pressure balance cartridge. Fitting shall be American Standard Model # TU662.221.002.

6/20

Commercial Shower System Trim Kit For Flash Rough Shower Valve

2.5 GPM with Hand Shower

© 2020 AS America Inc.

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ASSE 1016

ASME A112.18.1016

CSA B125.16

ASME A112.18.1

CSA B125.1

Product Number Description

Finish

Polished Chrome

TU662.221

Commercial Shower System Trim Kit. Contains double ceramic pressure balance cartridge, valve trim kit, 3-function hand shower with non-positive shut-off, metal hose, vacuum breaker, wall supply and 36" slide bar. 2.5 gpm/9.5 L/min.

** Flash rough-in valve must be purchased separately

900 mm (35-3/8")

849 mm (33-3/8")

86 mm (3-3/8")

65 mm (2-1/2") 82 mm

(3-1/4") 45 mm (1-3/4")

127 mm (5")

24 mm (1")

32 mm (1-1/4")13 mm (1/2")

INLET:

1/2" NPT

1829 mm (72") to 1990 mm (78")

(OPTIONAL)

TO FINISHED

FLOOR

RUBBER GASKET

FINISHED WALL

OUTLET:

1/2" NAPS HOSE

CONNECTION

53 mm (2-1/16")

84mm (3-5 /16")

206 mm (8-1/8")

1/2" NPSM

190 mm (7-1/2")

79 mm (3-1/8")

RELIANT 3 (TU3885500WD)

6/23/2021 SL-2019-A-GR Model | Stainless Steel Sinks and Faucets by Just https://www.justsinks.com/models/sl-2019-a-gr/ 1/2

SL-2019-A-GR

Click + below to add SL-2019-A-GR to your Quote List.

1 +

Single Bowl – Drop In – 18 Gauge – Standard Depth – With Faucet Ledge

Specifications Seamless die-drawn construction.

18 gauge type 304, 18-8, stainless steel.

Maximum capacity straight-sided compartment with 1 3/4″ radius corners.

Polished to a Hand-Blended JUST finish, with highlighted bowl rim.

Fully coated underside.

Grip-Rim Plus self-rimming 300 series stainless steel mounting channels.

Conforms to ASME/ANSI A112.19.3M.

Drain punched J-35 drain centered.

Dimensions (Front-to-Back x Left-to-Right)

GAUGE OD (WxL) ID (WxLxD)

6/23/2021 SL-2019-A-GR Model | Stainless Steel Sinks and Faucets by Just https://www.justsinks.com/models/sl-2019-a-gr/ 2/2

GAUGE OD (WxL) ID (WxLxD)

18 20 x 19 14 x 16 x 7 1/2

Available ADA Compliant

This Model is Available in 4-1/2" To 6-1/2" Deep Drain Center Rear. Specify as Such

Spec Drawing

Downloads PDF (http://sinks.justmfg.com/PDF/SL2019A.pdf) DXF Template (http://www.justmfg.com/dxf_handle?model=SL-2019-A-GR) CAD DXF (http://www.justmfg.com/DXF2/SL-__-A-GR-SERIES.dxf) BIM (.skp) (https://www.justmfg.com/cart/file-download/?skp=2019TEMP.DXF&rfa=SL_2019_A_GR.rfa) http://sinks.justmfg.com/PDF/SL2019A.pdf http://www.justmfg.com/dxf_handle?model=SL-2019-A-GR http://www.justmfg.com/DXF2/SL-__-A-GR-SERIES.dxf https://www.justmfg.com/cart/file-download/?skp=2019TEMP.DXF&rfa=SL_2019_A_GR.rfa

Willoughby Industries - Healthcare Products

H22-5

MADE IN THE U.S.A.

visit our website at www.willoughby-ind.com

BETF-1490-FM-FA

Bariatric Front Mounted Floor Outlet Floor Mounted

Bariatric, Front Mounted, Floor Outlet, Floor Mounted Siphon Jet Series Toilet shall be: Willoughby Model No. BETF-1490-FM-FA (Select from model number and options list on next page)

Fixture shall be fabricated from heavy gauge, Type 304 stainless steel. The construction shall be all-welded. Fixture exterior shall

Toilet bowl interior shall have a sanitary bead-blast stainless

Standard toilet shall include: elongated toilet bowl with integral toilet seat shall have open front with cover and be rated for a steel, seat and cover shall be white in color.

to 5000 pounds with no permanent damage.

others.

Note:

Note:

ments of WaterSense.

(TOP SPUD INLET SHOWN)

Example: To specify a Front Access, Floor Outlet, Siphon Jet Series Bariatric Toilet with back spud, Use the following Willoughby Model Number:

BETF-1490-FM-FA-BS-FV-RTH1

H22-6

MODEL NUMBER AND OPTIONS:

MADE IN THE U.S.A.

visit our website at www.willoughby-ind.com

VE

R

IF

Y

A

LL

D

IM

EN

SI

O N

S W

IT

H

F A

C

TO

RY

P

R

IO

R T

O R

O U

G H

-IN

W

IL

LO

U G

H B

Y R

ES

ER

VE

S

TH

E

R

IG

H T

TO

M

A K

E C

H A

N G

ES

IN

D

ES

IG

N

A N

D D

IM

EN

SI

O

N S

W

IT

H O

U T

FO

R

M A

L N

O

TI

C E

A N

D W

IT

H

O U

T

IN

C U

R R

IN

G

O B

LI

G

AT

IO

N

BETF-1490-FM-FA Bariatric, Front Mounted, Floor Outlet, Floor Mounted Siphon Jet Series Toilet

BS Back Spud TS Top Spud

FV Flush Valve

FVT Flush Valve Connection

MT Metal Template

Other: _________________________ Other: _________________________

N1 © 2020 AS America Inc.

spec_2856.128 Afwall Millenium FW 1.28gpf Rev. 3 1/2020

Afwall® Millenium™ FloWise®

1.28 GPF Flushometer Toilet System

with EVERCLEAN®

MANUAL FLUSH VALVE

Afwall® Millenium™ FloWise® 1.28 GPF Flushometer Toilet System With EverClean®

❏ 2856.128 1.28 gpf Exposed Top Spud Bowl and Manual Flush Valve

BOWL:

• Wall-mount elongated flushometer valve toilet

• Vitreous china

• High Efficiency. Operates in the range of 1.1 gpf to 1.6 gpf (4.2 Lpf to 6.0 Lpf)

• Permanent EverClean® surface inhibits the growth of stain- and odor-causing bacteria, mold, and mildew on the surface

• Condensation channel

• Direct-fed siphon jet action

• 1-1/2" inlet spud

• Fully-glazed 2-1/8" trapway

• 10" x 12" water surface area

• 100% factory flush tested

• Bolt caps and seat not included

• Model 3351.101

MANUAL FLUSH VALVE:

• Manual Piston-Type Water Closet Flush Valve for floor-mounted or wall-hung 1-1/2" top spud bowls

• Self-cleaning brass piston with integral wiper spring prevents clogging and reduces maintenance

• Piston operation delivers superior flush accuracy and repeatability

• Piston valve remains closed and does not need to be reset after loss of water pressure

• ADA compliant non-hold open handle provides automatic shut-off after every flush

• Positive seal ensures leak-free performance

• No external volume adjustment

• Durable chrome-plated cast brass construction is ideal for commercial applications

• Chloramine-resistant EPDM seals

• Adjustable tailpiece for rough-in flexibility

• Can be installed left or right handed

• Model 6047.121.002

Includes:

• 047007-0070A Inlet spud (furnished with bowl)

• 1" I.P.S. angle stop with back-flow prevention and vandal-resistant cap

• Sweat solder kit including cover tube and wall flange

• High back pressure vacuum breaker with down tube

• Spud coupling & flange for 1-1/2" top spud

High-Efficiency Toilet Systems:

• 20% water savings when compared to a 1.6 gpf toilet system

System MaP* Score:

• 1,000 grams of miso @ 1.28 gpf

* Maximum Performance (MaP) testing performed by

IAPMO R&T Lab. MaP Report conducted by Veritec Consulting, Inc. and Koeller and Company.

Operating Pressure:

25 psi (flowing) - 80 psi (static)

Flow Requirement:

25gpm (94.6 L/min.)

Nominal Fixture Dimensions:

660 x 356 x 381mm…