Garland Roof Measurement Report.pdf

West Roxbury VA Roof Measurement 1400 vfw parkway, west roxbury, MA 02132

Report Contents Images Length Diagram Pitch Diagram Area Diagram Penetrations Diagram Notes Diagram Property Info Report Summary

Report Details Date: 01/04/2024 Report: 56776223 Building: 1

Roof Details Total Area: 10,962 sq ft Total Roof Facets: 4 Predominant Pitch: 0/12 Number of Stories: >1 Total Ridges/Hips: 0 ft Total Valleys: 0 ft Total Rakes: 0 ft Total Eaves: 0 ft Total Penetrations: 50 Total Penetrations Perimeter: 760 ft Total Penetrations Area: 1,206 sq ft

Contact Us Contact:

Company:

Address:

Phone:

Brian Kender

The Garland Company, Inc.

bkender@garlandco.com

617-755-4655 xcxc

In this 3D model, facets appear as semi-transparent to reveal overhangs.

ROOF MEASUREMENT REPORT

REPORT IMAGES

The following aerial images show different angles of this structure for your reference.

Top View

North View

East View

South View

West View

LENGTH DIAGRAM

29 +6

1212 65

19 +6

S

N

W

E

Total Line Lengths: Ridges = 0 ft Valleys = 0 ft Flashing = 0 ft Eaves = 0 ft Hips = 0 ft Rakes = 0 ft Step flashing = 25 ft Parapets = 583 ft

Note: This diagram contains segment lengths (rounded to the nearest whole number) over 5 feet. In some cases, segment labels have been removed for readability. Plus signs preface some numbers to avoid confusion when rotated (e.g. +6 and +9).

PITCH DIAGRAM

F

F F

S

N

W

E

Pitch values are shown in inches per foot, and arrows indicate slope direction. The predominant pitch on this roof is 0/12.

Note: This diagram contains labeled pitches for facet areas larger than 20 square feet. In some cases, pitch labels have been removed for readability. Gray shading indicates flat, 1/12 or 2/12 pitches. If present, a value of "F" indicates a flat facet (no pitch).

AREA DIAGRAM

S

N

W

E

Total Area = 10,962 sq ft, with 4 facets.

Note: This diagram shows the square feet of each roof facet (rounded to the nearest foot). The total area in square feet, at the top of this page, is based on the non-rounded values of each roof facet (rounded to the nearest square foot after being totaled).

PENETRATIONS

38 3940

28 24

89101112

S

N

W

E

Penetrations Notes Diagram Penetrations are labeled from smallest to largest for easy reference.

Total Penetrations: 50 Total Penetrations Area: 1,206 sq ft Total Penetrations Perimeter = 760 ft Total Roof Area Less Penetrations = 9,756 sq ft

Note: Any measured penetration smaller than 3x3 feet may need field verification. Accuracy is not guaranteed. The total penetration area is not subtracted from the total roof area.

NOTES DIAGRAM

Roof facets are labeled from smallest to largest (A to Z) for easy reference.

D

A

B C

S

N

W

E

Property Info

Property Location

Longitude = -71.1716553 Latitude = 42.2739225

Online map of property:

http://maps.google.com/maps?f=g&source=s_q&hl=en&geocode=&q= 1400+vfw+parkway,west+roxbury,MA,02132 Property Info

Year Built:

Effective Year Built: *

Notes

This was ordered as a commercial property. There were no changes to the structure in the past four years.

http://maps.google.com/maps?f=g&source=s_q&hl=en&geocode=&q=1400+vfw+parkway,west+roxbury,MA,02132

REPORT SUMMARY

S

N

W

E

Below is a measurement summary using the values presented in this report.

Lengths, Areas and Pitches Ridge .....................................................0 ft (0 Ridges) Hips...........................................................0 ft (0 Hips) Valleys ...................................................0 ft (0 Valleys) Rakes* ....................................................0 ft (0 Rakes) Eaves/Starter**........................................0 ft (0 Eaves) Drip Edge (Eaves + Rakes) ....................0 ft (0 Lengths) Parapet Walls...................................583 ft (16 Lengths) Flashing ................................................0 ft (0 Lengths) Step Flashing.......................................25 ft (2 Lengths) Total Area ..................................................10,962 sq ft Total Penetrations Area.................................1,206 sq ft Total Roof Area Less Penetrations..................9,756 sq ft Total Penetrations Perimeter.................................760 ft Predominant Pitch..................................................0/12

*Rakes are defined as roof edges that are sloped (not level).

** Eaves are defined as roof edges that are not sloped and level.

Total Roof Facets = 4

Measurements by Structure

Structure Area (sq ft)

Ridges

(ft) Hips (ft) Valleys

(ft) Rakes

(ft) Eaves

(ft) Flashing

(ft) Step Flashing

(ft) Parapets

(ft)

1 8363 0 0 0 0 0 0 25 370 2 2598 0 0 0 0 0 0 0 213

All values in this table are rounded up to the nearest foot for each separate structure. Measurement totals displayed elsewhere in this report are added together before rounding which may cause totals to differ.

Areas per Pitch Roof Pitches Area (sq ft) % of Squares

0/12 13/12

10168.0 793.3 92.8% 7.2%

The table above lists each pitch on this roof and the total area and percent (both rounded) of the roof with that pitch.

Waste Calculation Table Waste % 0% 10% 12% 15% 17% 20% 22% Area (sq ft) 10,962 12058.2 12277.4 12606.3 12825.5 13154.4 13373.6 Squares 109.6 120.6 122.8 126.1 128.3 131.5 133.7 This table shows the total roof area and squares (rounded up to the nearest decimal) based upon different waste percentages. The waste factor is subject to the complexity of the roof, individual roofing techniques and your experience. Please consider this when calculating appropriate waste percentages. Note that only roof area is included in these waste calculations. Additional materials needed for ridge, hip, valley, and starter lengths are not included.

Parapet Calculation Table Wall Height (ft) Vertical Wall Area (sq ft)

1 2 3 4 5 6 7 583 1166 1749 2332 2915 3498 4081

This table provides common parapet wall heights to aid you in calculating the total vertical area of these walls. Note that these values assume a 90 degree angle at the base of the wall. Allow for extra materials to cover cant strips and tapered edges.

Penetration Table Area (sq ft) Perimeter (ft)

1-22 23-38 39 40 41 42 43 44 45 46

0.2 1 2.2 4 6.2 12.2 39.6 108.7 40.2 84.8 2 4 6 8 10 14 42.8 44 68 90.6

Area (sq ft) Perimeter (ft)

47-48 49 50

222.8 223.4 218.4

92 92.2 92.3 Any measured penetration smaller than 3x3 feet may need field verification. Accuracy is not guaranteed. The total penetration area is not subtracted from the total roof area.