24-8284_Supplemental_-_Fuel_Tank_Finish-Primer.pdf

Chemthane 3300 Acrylic Polyurethane Finish Coating

For High Performance Applications

Features High Gloss

Chemthane 3300 is formulated as an aesthetic high gloss finish coat.

UV Stabilized

Chemthane 3300 will hold its color in direct sunlight.

It will not chalk or discolor.

Chemical Resistance

Chemthane 3300 demonstrates excellent chemical resistance due to its high crosslink density.

High Solids

Chemthane 3300 is formulated with a high solids content to reduce

VOCs.

Application Chemthane 3300 is mixed

1 part A to 3 parts B and does not require thinners.

For best results, it should be spray applied over

Chemprime 3001.

Be sure to consult a

Chemline representative for equipment and application training.

Description Chemthane 3300 is a high-solids, VOC compliant, acrylic polyurethane finish coating. Chemthane 3300 is formulated to give an extremely durable high performance finish having outstanding gloss and color retention.

Chemthane 3300 should be applied over a Chemprime 3001

Epoxy Primer. When used with Chemprime 3001, Chemthane

3300 meets AWWA D102-03 “Coating Steel Water Tanks” -

Outside Coating System #5.

Technical Data

Property Value

Mix Ratio, A to B 1:3

Solids, percent by volume 58

Solids, percent by weight 68

VOCs, lbs per mixed gallon 2.9

Recommended Thickness, mils dft 2-3

Sag Resistance, mils wet film 5-6

Hardness 2 H

Direct Impact Strength, in lbs. 140

Flexibility, 180° bend over 1/8 in mandrel Pass at 2 mils

Abrasion Resistance, mg loss 110

Gloss, 60° meter 90+

Pot Life, min @ 77°F 40-45

Dry to Touch Time, min @ 77°F 60

Dry to Handle Time, hrs @ 77°F 4-6

Recoat Window, hrs @ 77°F 24 *Values obtained in laboratory setting for comparison purposes only and should not be considered specifications.

Safety This product is for industrial use only. Avoid contact with eyes and skin. Do not inhale or ingest. When spraying, wear a respirator or a fresh air hood. Spraying indoors requires forced ventilation. Be sure to read MSDS in its entirety prior to using

Chemthane 3300.

Chemline, Inc. • 5151 Natural Bridge Rd. • St. Louis, MO 63115 • Phone : (314) 664 - 2230 While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, it is provided for your guidance only. Because many factors may affect processing or application/use, we recommend that you make tests to determine the suitability of a product for your particular purpose prior to use. NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESIGNS, DATA, OR INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE

CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE. Further, you expressly understand and agree that the descriptions, designs, data, and information furnished by Chemline, Inc. hereunder are provided gratis and Chemline assumes no obligation or liability for the descriptions, designs, data and information given or results obtained, all such being given and accepted at your risk.

Chemline, Inc. • 5151 Natural Bridge Rd. • St. Louis, MO 63115 • Phone : (314) 664 - 2230 While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, it is provided for your guidance only. Because many factors may affect processing or application/use, we recommend that you make tests to determine the suitability of a product for your particular purpose prior to use. NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESIGNS, DATA, OR INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE

CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE. Further, you expressly understand and agree that the descriptions, designs, data, and information furnished by Chemline, Inc. hereunder are provided gratis and Chemline assumes no obligation or liability for the descriptions, designs, data and information given or results obtained, all such being given and accepted at your risk.

Revised 03/2013

CHEMPRIME 3001

CORROSION RESISTANT EPOXY PRIMER

DESCRIPTION

TYPICAL

PROPERTIES

Solids, by volume Solids, by weight

VOC (supplied and sprayable) Color Availability

Mix Ratio, by volume Weight per mixed gallon

Theoretical Coverage

Primer Requirement Application Temperature Range

Recommended Thickness Sag Resistance

Pot Life Adhesion to Steel

Adhesion to Concrete Chemical Resistance

Accelerated Weathering Salt Fog Spray

Gloss

58% 74%

3.2 lbs/mixed gallon Light Gray 4:1

11.8 lbs/gallon (5.3 kg/gallon) 930 sq. ft. per gallon per mil (86 sq. m/gal per mil) None Required 45oF - 120oF (7oC - 49oC) 3-6 mils dft (0.14 - 0.1.9mm) 9+ wet mils (0.22mm) 2+ hours @ 77oF (25oC) Excellent Excellent Excellent Will discolor & chalk > 2500 hours (ASTM B117-85) Flat

CURE TIMES Touch to the Cure Print Free

Ultimate Cure Time to Recoat

60 minutes @ 77oF (25oC) 6-8 hours @ 77oF (25oC) 7 days @ 77oF (25oC) After 4 hours, before 7 days @ 77oF (25oC)

CHEMPRIME 3001 is supplied in 5-gallon kits: 4-gallon Part A, 1-gallon Part B.

Keep containers tightly sealed until ready for use. Store material at temperatures between 50-80oF (10-27oC) in a dry well ventilated area.

Do not store near ignition source.

Ensure that material does not freeze. Material has a minimum shelf life of 12 months after the date of manufacture if properly stored.

PACKAGING,

STORAGE &

SHELF LIFE

SAFETY

PRECAUTIONS

CHEMPRIME 3001 IS FOR INDUSTRIAL USE ONLY. Avoid contact with eyes, and skin; do not inhale or ingest. When working with this material wear goggles, rubber gloves and a respirator. When spraying in a con-fined area, also wear a fresh air hood and make provision for forced venti-lation. Refer to MSDS regarding individual components.

revised: 0309

CHEMPRIME 3001 is a voc-compliant, high-performance epoxy primer. It adheres strongly to surface prepared steel and concrete. It provides excellent barrier protection against corrosion. It has high chemical resistance making it suitable for use in aggressive environments. This product is ideal for steel fabricators requiring a high-performance, corrosion-resistant primer with good handling and recoat features.

CHEMPRIME 3001 may be topcoated using CHEMTHANE 3107 or CHEMTHANE 3300. This primer is easy to apply using a brush, roller, conventional or airless spray equipment.

This product complies with Mil Spec 24441 as a primer and intermediate coat.

Consult with a CHEMLINE Representative for detailed application instructions. For best results, The substrate must be dry and free from dust, oil and grease. The substrate surface temperature should be a minimum of 5 F above the dew point of ambient air. Abrasive blast substrate surface using steel grit or sand. Steel surfaces should be cleaned to a minimum commercial blast with a minimum angular profile of 1.5 mils. Clean concrete surfaces by removing all surface laitance and exposing sound concrete.

Combine Parts A and B in a ratio of 4:1 by volume. Power mix Parts A and B together until uniform.

Material may be used immediately. Thinning is usually not required but may be done with MEK or Xylol.

CHEMPRIME 3001 is applied using a brush, roller or spray application equipment. Best results have been obtained using a 30:1 (or higher) single component airless spray pump, a .015 or .017 spray tip and fluid pressures ranging from 2200-3000 psi (airless). Filters 60-100 mesh. Apply in an even, uniform manner making sure recesses and edges are thoroughly coated. It is recommended that a ‘stripe’ coat be first applied to weld seams and edges to ensure good coverage. A minimum thickness of 2 mils dft must cover the ‘peaks’ of the blast profile for proper corrosion protection. Flush pump thoroughly immediately after use with MEK or Xylol.

APPLICATION

GUIDELINES

WARRANTY CHEMLINE warrants this product to be free of defects in material and workmanship. CHEMLINE’s sole obligation and Buyer’s exclusive remedy in connection with the products shall be limited, at CHEMLINE’s option, to either replace the products not conforming to this Warranty or credit to Buyer’s account in the invoiced amount of the nonconforming products. Any claim under this Warranty must be made by the Buyer to CHEMLINE in writing within (5) days of Buyer’s discovery of the claimed defect, but in no event later than the expiration of the applicable shelf life, or one year from the delivery date, whichever is earlier. Buyer’s failure to notify CHEMLINE of such nonconformance as required herein shall bar Buyer from recovery under this Warranty.

CHEMLINE makes no other warranties whether express, implied, or statutory, such as warranties of merchantability or fitness for a particular purpose, shall apply. In no event shall CHEMLINE be liable for consequential or incidental damages.

Any recommendations or suggestion relating to the use of the products made by CHEMLINE, whether in its technical literature, or in response to specific inquiry, or otherwise, is based on data believed to be reliable; however, the products and information are intended for use by buyers having requisite skill and know-how in the industry, and therefore it is for Buyer to satisfy itself of the suitability of the products for its own particular use and it shall be deemed that Buyer has done so, at its sole discretion and risk. Variation in environment, changes in procedures of use, or extrapolation of data may cause unsatisfactory results.

LIMITATION

OF LIABILITY

CHEMLINE’s liability on any claim of any kind, including claims based upon CHEMLINE’s negligence or strict liability, for any loss or damage arising out of, connected with, or resulting from the use of the products, shall in no case exceed the purchase price allocable to the products or part thereof which give rise to the claim. In no event shall CHEMLINE be liable for consequential or incidental damages.

CHEMLINE INCORPORATED

5151 NATURAL BRIDGE ROAD

ST. LOUIS, MO • 63115 • USA

T: 314-664-2230 • F: 314-664-1355 www.chemline.net

©CHEMLINE INC. 2004

CHEMPRIME 3001 revised: 0309