142010-26-0138_BUF_UA_Observatory_Roof_Replacement_Statement_of_Work_Attachment_3B.pdf

PRODUCT REFERENCE GUIDE

SINGLE PLY

PVC MEMBRANES

TABLE OF CONTENTS

MEMBRANES

JM EPDM NR

JM EPDM R 22

JM EPDM NR FIT Systems JM EPDM R FIT Systems

JM EPDM FIT SA 23

JM White EPDM NR 24

ACCESSORIES GENERAL

JM EPDM Reinforced Perimeter Strip JM EPDM Pre-Taped Curb Flashing JM EPDM Seam Tape Plus 25

JM White EPDM Pre-Taped Curb Flashing JM White EPDM Seam Tape Plus 26

ACCESSORIES BALLAST MATS

JM EPDM Protective Stone Mat 27

ACCESSORIES PEEL & STICK

JM EPDM Peel and Stick Flashing JM EPDM Peel and Stick Sealing Strip JM EPDM Reinforced Termination Strip with Tape JM EPDM Peel and Stick Walkpad JM EPDM Peel and Stick Inside/Outside

JM EPDM Peel and Stick T-Joint Patch JM EPDM Peel and Stick Pourable Sealer Pocket 29

JM White EPDM Peel and Stick Flashing JM White EPDM Peel and Stick Sealing Strip JM White EPDM Peel and Stick Walkpad JM White EPDM Peel and Stick Inside/ Outside Corner JM White EPDM Peel and Stick Pipe Boot 30

JM White EPDM Peel and Stick T-Joint Patch JM White EPDM Peel and Stick Pourable Sealer Pocket 31

MEMBRANES

JM PVC

JM PVC FB

JM PVC mil/MIN 5

JM PVC SD Plus JM PVC SD Plus MIN 6

ACCESSORIES GENERAL

JM PVC Detail Membrane JM PVC Detail Strip JM PVC T-Joint Patch JM PVC Universal Corner JM PVC Penetration Pan 7

ACCESSORIES PIPE BOOTS

JM PVC Pipe Boot JM PVC Square Pipe Boot JM PVC Split Pipe Boot 8

ACCESSORIES SAFETY

JM PVC Safety Strip JM PVC Walkpad JM PVC Heavy Duty Walkpad 9

ACCESSORIES COATED METAL

JM PVC Coated Metal 10

ACCESSORIES MISCELLANEOUS

JM PVC Polyester Mat

PVC TPO EPDM

TOC

MEMBRANES

JM TPO Roofing Membrane 13

JM TPO Fleece Backed Roofing Membrane JM TPO Roofing Membrane MIN JM TPO Self-Adhered Roofing Membrane

ACCESSORIES GENERAL

JM TPO Detail Membrane JM TPO T-Joint Patch JM TPO Universal Corner JM TPO Curb Flashing JM TPO Penetration Pocket JM TPO Reinforced Cover Strip 15

ACCESSORIES PEEL & STICK

JM TPO Cover Tape JM TPO Peel and Stick Reinforced Termination Strip (RTS) JM TPO Peel and Stick Reinforced Perimeter Strips (RPS) JM TPO Heat Weldable Cover Tape JM White EPDM Peel & Stick Flashing JM White EPDM Peel & Stick Inside/Outside Corners 16

ACCESSORIES PIPE BOOTS

JM TPO Pipe Boot (Peel and Stick) JM TPO Pipe Boot JM TPO Split Pipe Boot TPO Square Pipe Boot 17

ACCESSORIES SAFETY

JM TPO Walkpad JM TPO Safety Walkpad JM Single Ply Safety Strip 18

ACCESSORIES COATED METAL

JM TPO Coated Metal 19

ACCESSORIES MISCELLANEOUS

JM 3oz Polyester Mat Protection Slipsheet 20

TABLE OF CONTENTS

POLYISOCYANURATE

ENRGY 3® [Flat] 33

ENRGY 3® [Tapered] 35

ENRGY 3® CGF [Flat] 37

ENRGY 3® CGF [Tapered] 39

ROOF BOARDS GYPSUM-FIBER

SECUROCK® Gypsum-Fiber Roof Board 41

ROOF BOARDS PRIMED

DensDeck® Prime Roof Board DensDeck® StormX™ Prime Roof Board DEXcell FA Glass-Mat Roof Board 42

ROOF BOARDS GLASS-FACED

DensDeck® Roof Board DEXcell® Glass-Mat Roof Board DEXcell® FA VSH Glass-Mat Roof Board SECUROCK® Ultralight Glass-Mat Roof Board 43

ROOF BOARDS CEMENT

DEXcell® Cement Roof Board SECUROCK® Cement Roof Board 44

COVER BOARDS HIGH DENSITY

RetroPlus™ Roof Board ProtectoR® HD 45

COVER BOARDS POLYISO

SeparatoR®

SeparatoR® CGF 46

VAPOR BARRIERS

JM Vapor Barrier SA JM Vapor Barrier SAR 47

ISO & COVER

BOARDS

FASTENERS

& PLATES

INSULATION

UltraFast® Fasteners UltraFast® Plates UltraFast® AccuTrac™ Plates Lite Deck Fasteners 49

MEMBRANE

High Load Fasteners High Load Plates High Load AccuSeam™ Plates 50

Extra High Load Fasteners Extra High Load Plates APB Plates 51

MULTI-PURPOSE

JM PVC RhinoPlate®

JM PVC TreadSafe RhinoPlate®

JM TPO RhinoPlate®

JM TPO TreadSafe RhinoPlate® 52

All-Purpose Fasteners Polymer Auger Fasteners 53

Structural Concrete Deck Fasteners JM RetroDriller Fasteners 54

CLEANERS

ADHESIVES

PRIMERS

SEALANTS

CLEANERS

JM TPO Membrane Cleaner JM Single Ply Membrane Cleaner

PRIMERS

JM Single Ply Membrane Primer [Low VOC] JM TPO Membrane Primer JM EPDM Tape Primer Plus JM EPDM Tape Primer Plus [Low VOC] 57

ADHESIVES SPRAYABLE

JM All Season Sprayable Bonding Adhesive JM PVC All Season Sprayable Bonding Adhesive JM Sprayable Bonding Adhesive Flush [LVOC] JM All Season Sprayable Bonding Adhesive Accesories 58

ADHESIVES

JM Membrane Bonding Adhesive JM LVOC Membrane Adhesive JM TPO Water Based Membrane Adhesive JM EPDM Water Based Membrane Adhesive JM PVC Membrane Adhesive JM PVC Water Based Membrane Adhesive 59

JM Roofing System Urethane Adhesive JM Two-Part Urethane Insulation Adhesive JM QuickFoam™ Adhesive JM Two-Part Urethane Insulation Adhesive

SEALANTS

JM TPO Pourable Sealer JM One-Part Pourable Sealer JM Single Ply LVOC Caulk JM Single Ply Sealing Mastic JM EPDM/PVC Pourable Sealer 61

JM PVC Edge Sealant JM TPO LVOC Edge Sealant 62

TOC

PVC

polyvinyl chloride Built to withstand the test of time, our PVC roofing membranes are made to resist the toughest weather conditions and chemicals. JM PVC with Dow Elvaloy® KEE and JM PVC SD Plus thermoplastic roofing membranes are manufactured using an ultraviolet-resistant polyvinyl chloride. Utilizing a polyester fabric reinforcement allows for systems to be both mechanically attached and adhered. PVC membranes deliver a pliable and durable sheet with excellent weathering characteristics and resistance to harsh chemicals and industrial pollutants.

PVC MEMBRANESPVC MEMBRANES

JM PVC mil/MIN with Dow™ Elvaloy® KEE Polymer

JM PVC FB

with Dow™ Elvaloy® KEE Polymer

JM PVC

with Dow™ Elvaloy® KEE Polymer

SIZE COLOR SKU

MIL

76" × 90' White 70000735

144" × 90' White 70000712

76" × 90' Grey 70000208

76" × 90' Sandstone 70000570

MIL

76" × 75' White 70000386

144" × 75' White 70000739

SIZE COLOR SKU

MIL

39" × 100' White 70000363

60" × 100' White 70000362

78" × 100' White 70000360

120" × 100' White 70000361

MIL

39" × 100' White 70000371

60" × 100' White 70000373

78" × 100' White 70000377

120" × 100' White 70000370

144" × 100' White 70003843

60" × 100' Grey 70000721

78" × 100' Grey 70000378

120" × 100' Grey 70000718

60" × 100' Sandstone 70000716

78" × 100' Sandstone 70000379

120" × 100' Sandstone 70000719

MIL

39" × 75' White 70000384

60" × 75' White 70000374

78" × 75' White 70000382

120" × 75' White 70000383

78" × 75' Grey 70000388

120" × 75' Grey 70000711

78" × 75' Sandstone 70000700

120" × 75' Sandstone 70000713

SIZE COLOR SKU

MIL

39" × 100' White 70000372

78" × 100' White 70000369

120" × 100' White 70000690

MIL

78" × 75' White 70000684

Component

Single Ply

Membrane M

Component

Single Ply

Membrane M

Component

Single Ply

Membrane M

JM PVC with KEE FB is a heat-weldable thermoplastic membrane that utilizes a Spunbond

3.8 oz. fleece creating an extremely durable, strong yet light and flexible protection layer.

JM PVC with the optimal amount of Dow™ Elvaloy® KEE is a heat-weldable polyvinyl chloride thermoplastic membrane that provides superior resistance against oil, fuels and other hard chemicals.

JM PVC with KEE MIN is a heat-weldable thermoplastic membrane with a minimum thickness of either 60 or 72 mils.

PVC MEMBRANESPVC MEMBRANES

SIZE COLOR SKU

MIL

120" × 100' White 70004498

MIL

120" × 75' White 70004638

SIZE COLOR SKU

MIL

60" × 100' White 70003055

120" × 100' White 70003054

MIL

60" × 100' White 70003053

120" × 100' White 70003052

120" × 100' Grey 70005408

MIL

60" × 75' White 70003313

120" × 75' White 70003314

JM PVC SD Plus JM PVC SD Plus MIN

Component

Single Ply

Membrane M

Component

Single Ply

Membrane M

JM PVC SD Plus is a heat-weldable thermoplastic polyvinyl chloride membrane available in 50, 60 and 80 mil.

JM PVC SD Plus is a heat-weldable thermoplastic polyvinyl chloride membrane available in 60 and 80 mil.

PVC MEMBRANESPVC ACCESSORIES

QTY/BOX DIAMETER SKU

12/Box 6" 70000270

SIZE COLOR SKU

6" × 150' Black / White 70000627

8" × 150' White / Grey 70000262

8" × 150' Sandstone / White 70000263

SIZE COLOR SKU

36" × 50' White / Grey 70000264

36" × 50' White / Sandstone 70000265

Component

Type

Single Ply

Accessory

Penetration

A

FP

Component

Type

Single Ply

Accessory

Membrane Seaming

A

MS

Component

Type

Single Ply

Accessory

Flashing Wall

Curb/Corner

A

FW

FC

Component

Type

Single Ply

Accessory

Flashing Wall

Curb/Corner

A

FW

FC

Component

Type

Single Ply

Accessory

Membrane Seaming

Finishing Edge

A

MS

FE

JM PVC

Detail Membrane

JM PVC

Detail Strip

JM PVC

T-Joint Patch

Flexible, nonreinforced thermoplastic membrane used to waterproof details.

Flexible, nonreinforced thermoplastic membrane used to waterproof details.

Flexible, nonreinforced thermoplastic material used to cover joints, discs and fasteners in the membrane.

JM PVC

Universal Corner

JM PVC

Penetration Pan

Flexible, nonreinforced, waffle-patterned thermoplastic membrane.

One-piece molded unit with a square base flange used to seal uneven difficult-to-flash membrane penetrations.

GENERAL

SIZE QTY/BOX COLOR SKU

6" 20/Box White 70001598

6" 20/Box Grey 70001600

6" 20/Box Sandstone 70001599

SIZE QTY/BOX COLOR SKU

4.5" 100/Box White 70001405

4.5" 100/Box Grey 70001406

4.5" 100/Box Sandstone 70001407

SIZE QTY/BOX COLOR SKU

1" 8/Box White 70004164

2" 8/Box White 70004165

3" 8/Box White 70004166

4" 8/Box White 70004167

5" 8/Box White 70004168

6" 8/Box White 70004169

SIZE QTY/BOX COLOR SKU

1"– 6" 10/Box White 70001332

1"– 6" 10/Box Grey 70001333

1"– 6" 10/Box Sandstone 70001334

SIZE QTY/BOX COLOR SKU

2" 8/Box White 70004170

4" 8/Box White 70004172

Component

Type

Single Ply

Accessory

Penetration

A

FP

Penetration

FP

Component

Type

Single Ply

Accessory A

Penetration

FP

Component

Type

Single Ply

Accessory A

JM PVC

Pipe Boot

JM PVC

Square Pipe Boot

JM PVC

Split Pipe Boot

Flexible, nonreinforced thermoplastic membrane used to flash vent stacks and round penetrations.

Fabricated from reinforced 60 MIL JM PVC. Used to flash vent stacks and other square penetrations.

Fabricated reinforced 60 MIL JM PVC, used to flash vent stacks and other round penetrations.

PIPE BOOTS

Component

Type

Single Ply

Accessory

Protection

A

PT

Protection

PT

Component

Type

Single Ply

Accessory A

Protection

PT

Component

Type

Single Ply

Accessory A

JM PVC

Safety Strip

JM PVC

Walkpad

JM PVC

Heavy Duty Walkpad

45 mil, reinforced, UV-resistant PVC with Elvaloy® KEE safety warning line for roof perimeters.

Flexible, polyester-reinforced thermoplastic membrane intended for use as protection around high-traffic areas.

150 mil, textured, reinforced thermoplastic membrane for use around high-traffic areas.

SAFETY

SIZE COLOR SKU

12" × 150' Yellow 70000599

SIZE COLOR SKU

36" × 60' Grey 70000277

SIZE COLOR SKU

36" × 60' Yellow 70000279

SIZE QTY/PALLET COLOR SKU

4' × 10' 10/Pallet White 70005268

4' × 10' 30/Pallet White 70000266

4' × 10' 30/Pallet Grey 70000267

4' × 10' 30/Pallet Sandstone 70000268

4' × 10' 30/Pallet Black 70000269

SIZE QTY/PALLET COLOR SKU

4' × 10' 30/Pallet White 70000637

SIZE QTY/PALLET COLOR SKU

4' × 10' 30/Pallet White 70003351

Component

Type

Single Ply

Accessory

Finishing Edge

A

FE

Finishing Edge

FE

Component

Type

Single Ply

Accessory A

Finishing Edge

FE

Component

Type

Single Ply

Accessory A

JM PVC Coated Metal [Galvanized Steel]

JM PVC Coated Metal [.040 Aluminum]

JM PVC Coated Metal [Stainless Steel]

JM PVC membrane laminated with galvanized steel to be fabricated into metal flashings and edge details.

JM PVC membrane laminated with .040 aluminum to be fabricated into metal flashings and edge details.

JM PVC membrane laminated with stainless steel to be fabricated into metal flashings and edge details.

COATED METAL

SIZE QTY COLOR SKU

1.5" × 1.25" × 10' 24 White 70002739

1.5" × 1.25" × 10' 24 Grey 70002740

1.5" × 1.25" × 10' 24 Sandstone 70002741

SIZE SKU

12' × 100' 70000275

Component

Type

Single Ply

Accessory

Protection

A

PT

JM Polyester Mat Protection Slipsheet

JM PVC Profiles

Polyester 9.0oz needle-punched UV-resistant fabric utilized as cushioning, separation or a protective layer for single ply systems.

Preformed, nonreinforced, extruded, heat-weldable standing seam roofing accessory used as a decorative rib to simulate the aesthetics of a standing seam metal roof.

MISCELLANEOUS

Component

Type

Single Ply

Accessory A

Membrane Seaming

MS

TPO

thermoplastic polyolefin Our JM TPO roofing systems give you the option of a reliable, cost-effective roofing solution. We reinforce our membranes with a polyester fabric and manufacture them using an ultraviolet-resistant thermoplastic polyolefin formulation. We developed our TPO formulation to allow for extreme pliability, flexibility and weldability during the installation.

PVC MEMBRANESTPO MEMBRANES

MIL

5' × 100' White 90029783

5' × 75' Grey 90001409

5' × 75' Tan 90001412

6' × 75' White 90026694

8' × 100' White 90029784

8' × 75' Grey 90001410

8' × 75' Tan 90001413

10' × 100' White 90029673

10' × 75' Grey 90001411

12' × 75' Tan 90001414

12' × 75' White 90026695

SIZE COLOR SKU

MIL

5' × 100' White 90001406

5' × 100' Grey 90001400

5' × 100' Tan 90001403

6' × 100' White 90026095

6' × 100' Grey 90026690

8' × 100' White 90001407

8' × 100' Grey 90001401

8' × 100' Tan 90001404

10' × 100' White 90001408

10' × 100' Grey 90001402

10' × 100' Tan 90001405

12' × 100' White 90026096

12' × 100' Grey 90026691

12' × 100' Tan 90026693 This single ply roofing membrane is ideal for quick installs on larger roofs.

SIZE COLOR SKU

MIL

5' × 100' White 90001397

5' × 100' Grey 90001391

5' × 100' Tan 90001394

6' × 100' White 90026093

8' × 100' White 90001398

8' × 100' Grey 90001392

10' × 100' White 90001399

10' × 100' Grey 90001393

10' × 100' Tan 90001396

12' × 100' White 90026094

12' × 100' Grey 90028891

JM TPO

Roofing Membrane

Component

Single Ply

Membrane M

PVC MEMBRANESTPO MEMBRANES

JM TPO Self-Adhered Roofing Membrane Thermoplastic Polyolefin Self-Adhered Membrane available in 60 mil thickness.

SIZE COLOR SKU

MIL

10' × 100' White 90038111

10’ × 100’ Grey 90039111

SIZE COLOR SKU

MIL

5' × 100' White 90027518

8' × 100' White 90027520

10' × 100' White 90027521

MIL

5' × 100' White 90021710

10' × 100' White 90013942

12' × 100' White 90027525

SIZE COLOR SKU

MIL

10' × 100' White 90001694

10' × 100' Grey 90014106

10' × 100' Tan 90013979

10' × 75' White 90024979*

MIL

10' × 50' White 90001558

10' × 50' Grey 90018483

10' × 50' White 90025016*

JM TPO Fleece-Backed Roofing Membrane

JM TPO Roofing Membrane MIN

Component

Single Ply

Membrane M

Component

Single Ply

Membrane M

Component

Single Ply

Membrane M

In-line application of fleece allows for stronger bond for polyester backing that gives more flexibility in varying substrates for mechanically fastened or adhered systems.

Tested continuously with a state-of-the-art thickness gauge to verify that the thickness valued by our customers in incorporated into the sheet.

*Heavy-Fleece Backed Membrane for Hot Asphalt Application in hybrid systems.

PVC MEMBRANESTPO ACCESSORIES

SIZE COLOR SKU

24" × 50' White 90001241

24" × 50' Grey 90001595

24" × 50' Tan 90001596

48" × 50' White 90001693

Component

Single Ply

Accessory A

Component

Type

Single Ply

Accessory

Membrane Seaming

A

MS

JM TPO

Detail Membrane

JM TPO

T-Joint Patch

JM TPO

Universal Corner

Flexible, non-reinforced TPO membrane used to wrap pipes and vertical stacks.

Flexible, non-reinforced TPO discs to seal seam laps where perimeter and/or header sheets intersect (T-joint) in TPO systems.

Flexible, nonreinforced, waffle-patterned TPO membrane used around inside and outside corners.

GENERAL

SIZE QTY/BOX COLOR SKU

4.5" 100/Box White 70001419

4.5" 100/Box Grey 70001420

4.5" 100/Box Tan 70001421

SIZE QTY/BOX COLOR SKU

6" 20/Box White 70001601

6" 20/Box Grey 70001604

6" 20/Box Tan 70001603

Component

Type

Single Ply

Accessory

Flashing Wall

Curb/Corner

A

FW

FC

SIZE COLOR SKU

18" × 50' White 90001886

18" × 50' Grey 90018480

18" × 50' Tan 90023042

Component

Type

Single Ply

Accessory A

Penetration

FP

Component

Type

Single Ply

Accessory A

Curb/Corner

FC

JM TPO

Curb Flashing

JM TPO

Penetration Pocket

JM TPO Curb Flashing is a 60 mil reinforced TPO membrane with an encapsulated edge used on curbs and parapet walls. This product eliminates the need for field cutting and edge sealant.

Two-piece, molded unit with a rounded base flange used to seal uneven or irregular penetrations. A welding tab is included to seal the penetration pan once positioned.

SIZE COLOR SKU

8" × 50' White 90001881

8" × 50' Grey 90018479

8" × 50' Tan 90023041

JM TPO

Reinforced Cover Strip 60 mil reinforced, heat-weldable TPO membrane primarily used to “strip in” flashing details, gravel stops, TPO coated metal joints, and exposed fasteners in the roof field.

QTY/BOX SKU

5/Box 70000673

Component

Type

Single Ply

Accessory

Membrane Seaming

Finishing Edge

A

MS

FE

SIZE QTY/BOX COLOR SKU

6" × 100' 2/Box White 70000322

6" × 100' 2/Box Grey 70000323

6" × 100' 2/Box Tan 70000324

10" × 100' 1/Box White 70000662

SIZE QTY/BOX COLOR SKU

6" × 100' 2/Box White 70000329

SIZE QTY/BOX COLOR SKU

10" × 100' 1/Box White 70000598

Component

Type

Single Ply

Accessory

Perimeter Reinforcement

A

PR

Component

Type

Single Ply

Accessory

Perimeter Reinforcement

A

PR

JM TPO

Cover Tape

JM TPO Reinforced Termination Strip (RTS)

JM TPO Reinforced Perimeter Strip (RPS)

TPO cover tape is a flexible, non-reinforced TPO membrane used to strip-in metal flanges.

Reinforced TPO membrane with factory-applied adhesive tape.

Reinforced TPO with factory-applied adhesive tape used to secure membrane from underneath in perimeters and corners.

PEEL AND STICK

Component

Type

Single Ply

Accessory

Flashing Wall

A

FW

Finishing Edge

FE

TOC

SIZE QTY/BOX COLOR SKU

6" × 100' 2/Box White 70008833

9" × 50' 2/Box White 70008834

12" × 50' 2/Box White 70008835

JM White EPDM Peel and Stick Flashing For TPO Application. Easily forms flashings around corners and penetrations that cannot be properly detailed with TPO membrane.

Component

Type

Single Ply

Accessory

Flashing Wall

A

FW

Finishing Edge

FE

Penetration

FP

SIZE QTY/BOX COLOR SKU

7" × 9” 2/Box White 70008896

JM White EPDM Peel and Stick Corners Inside/Outside corners. For TPO Application. Easily forms flashings around corners and penetrations that cannot be properly detailed with TPO membrane.

Component

Type

Single Ply

Accessory

Flashing Wall

A

FW

Finishing Edge

FE

Penetration

FP

SIZE QTY/BOX COLOR SKU

6" × 100' 2/Box White 70009197

JM TPO Heat Weldable Cover Tape TPO Heat Weldable Cover Tape is a 6” wide, flexible, reinforced TPO membrane used to strip-in metal flanges.

Component

Type

Single Ply

Accessory A

Finishing Edge

FE

SIZE QTY/BOX COLOR SKU

1"– 6" 10/Box White 70000541

1"– 6" 10/Box Grey 70000302

1"– 6" 10/Box Tan 70000301

SIZE QTY/BOX COLOR SKU

1"– 6" 10/Box White 70001363

Component

Type

Single Ply

Accessory

Penetration

A

FP

Component

Type

Single Ply

Accessory

Penetration

A

FP

JM TPO Pipe Boot [Peel and Stick]

JM TPO Pipe Boot

Flexible, non-reinforced TPO membrane used to flash vent stacks and round penetrations.

Flexible, non-reinforced TPO membrane used to flash vent stacks and round penetrations.

SIZE QTY/BOX COLOR SKU

2" 8/Box White 70004179

4" 8/Box White 70004180

Penetration

FP

Component

Type

Single Ply

Accessory A

JM TPO

Square Pipe Boot A prefabricated, reinforced 60 mil JM TPO, square boot in 2" and 4" (5.08 cm and 10.16 cm) sizes for tube-flashing application.

SIZE QTY/BOX COLOR SKU

1" 8/Box White 70004173

2" 8/Box White 70004174

3" 8/Box White 70004175

4" 8/Box White 70004176

5" 8/Box White 70004177

6" 8/Box White 70004178

Penetration

FP

Component

Type

Single Ply

Accessory A

JM TPO

Split Pipe Boot Prefabricated, reinforced 60 mil JM TPO rounded to shape a pipe from 1" to 6" in diameter for flashing applications.

PIPE BOOTS

SAFETY

Component

Type

Single Ply

Accessory

Protection

A

PT

JM Single Ply Safety Strip [Peel and Stick] Provides safety measures and protection on rooftop areas of caution.

SIZE COLOR SKU

5.5" × 100' Yellow 70005149

Component

Type

Single Ply

Accessory

Protection

A

PT

JM TPO

Safety Walkpad Provides a safe, stable and maintenance-free walkway for quick and easy access to rooftop equipment in high traffic areas.

SIZE COLOR SKU

30" × 50' Yellow 90036679

Protection

PT

Component

Type

Single Ply

Accessory A

JM TPO

Walkpad Textured, flexible TPO membrane intended for use as walkway material and protection around high-traffic areas.

SIZE COLOR SKU

30" × 50' Grey 90017894

SIZE QTY/PALLET COLOR SKU

4' × 10' 30/Pallet Grey 70001411

4' × 10' 30/Pallet Tan 70001412

4' × 10' 10/Pallet White 70005269

4' × 10' 30/Pallet White 70000316

SIZE QTY/PALLET COLOR SKU

4' × 10' 30/Pallet White 70004637

SIZE QTY/PALLET COLOR SKU

4' × 10' 30/Pallet White 70004220

Component

Type

Single Ply

Accessory

Finishing Edge

A

FE

Finishing Edge

FE

Component

Type

Single Ply

Accessory A

Finishing Edge

FE

Component

Type

Single Ply

Accessory A

JM TPO Coated Metal [Galvanized Steel]

JM TPO Coated Metal [.040 Aluminum]

JM TPO Coated Metal [Stainless Steel]

Nonreinforced JM TPO membrane laminated with galvanized steel to be fabricated into metal flashings and edge details.

Nonreinforced JM TPO membrane laminated with .040 aluminum to be fabricated into metal flashings and edge details.

Nonreinforced JM TPO membrane laminated with stainless steel to be fabricated into metal flashings and edge details.

COATED METAL

SIZE SKU

130" × 500' 90017402

Component

Type

Single Ply

Accessory

Protection

A

PT

JM 3 oz Polyester Mat Protection Slipsheet Needle-punched, non-UV-resistant polyester separation layer used for TPO, PVC and EPDM mechanically fastened systems and ballasted EPDM systems.

MISCELLANEOUS

EPDM

ethylene propylene diene monomer With superior durability and flexibility, EPDM is a smart roofing solution. Our EPDM production facility is one of the world’s most technologically advanced, allowing us to extrude our sheets instead of using the traditional calendering process. Our EPDM is manufactured thicker with a more uniform surface finish. This advancement in manufacturing cleaner sheets requires less preparation to ensure a stronger bond during installation. The curing of EPDM is referring to the vulcanization of the product. All of our sheets and many of our accessories are fully cured. Some flashing tapes, pre-molded pipe boots and corners are partially cured or uncured.

This gives the flashing materials greater flexibility and adhesion when using them in the field.

EPDM MEMBRANES

Cured ethylene propylene diene monomer reinforced with a tough 1,000+ denier polyester mat.

45, 60 and 90 mil cured, nonreinforced ethylene propylene diene monomer sheets.

SIZE SKU

MIL

10' × 100' 90017415

MIL

10’ × 100’ 90017417

SIZE SKU

MIL

10' × 50' 90017403

10' × 100' 90017400

20' × 50' 90017405

20' × 100' 90017404

30' × 100' 90017406

40' × 100' 90017407

MIL

10' × 50' 90017409

10' × 100' 90017408

16' 8" × 100' 90017416

20' × 50' 90017411

20' × 100' 90017410

30' × 100' (1 Fold) 90017412

40' × 100' 90023069

MIL

10' × 100' 90017413

JM EPDM RJM EPDM NR

Component

Single Ply

Membrane M

Component

Single Ply

Membrane

PVC MEMBRANESEPDM MEMBRANES

FIT SIZE SKU

MIL

4" (1 Side) 10' × 100' 90028837

4" (1 Side) 20' × 100' 90028840

4" (1 Side) 30' × 100' 90028841

MIL

4" (1 Side) 10' × 100' 90028826

4" (1 Side) 16' 8" × 100' 90028827

4" (1 Side) 20' × 100' 90028831

4" (1 Side) 30' × 100' 90028832

6" (1 Side) 10' × 100' 90028829

6" (1 Side) 16' 8" × 100' 90028836

6" (1 Side) 20' × 100' 90028838

6" (1 Side) 30' × 100' 90028839

MIL

4" (1 Side) 10' × 100' 90028835

6" (1 Side) 10' × 100' 90028828

FIT SIZE SKU

MIL

4" (1 Side) 10' × 100' 90028830

6" (1 Side) 10' × 100' 90028931

JM EPDM R

FIT Systems

JM EPDM NR

FIT Systems

Component

Single Ply

Membrane M

Component

Single Ply

Membrane M

Cured ethylene propylene diene monomer reinforced with a tough 1,000+ denier polyester mat and factory inseam tape.

Nonreinforced, cured EPDM membrane with factory inseam tape.

TOC

Self-Adhered EPDM requiring no additional use of VOC-containing adhesives or primers with factory inseam tape.

FIT SIZE SKU

MIL

3” (1 Side) 10' × 100' 90038776

JM EPDM FIT SA

Component

Single Ply

Membrane

PVC MEMBRANESEPDM MEMBRANES

Component

Single Ply

Membrane M

60 and 90 mil nonreinforced white ethylene propylene diene monomer sheets.

SIZE SKU

MIL

10' × 100' 70009000

20’ × 100’ 70009001

MIL

10' × 100' 70009010

JM White EPDM NR

PVC MEMBRANESEPDM ACCESSORIES

SIZE QTY/BOX SKU

3" × 100' 4 Rolls/Box 70001631

6" × 100' 2 Rolls/Box 70001632

SIZE SKU

18" × 50' 70004383

24" × 50' 70004384

SIZE SKU

10" × 100' 70005550

JM EPDM Reinforced Perimeter Strip

JM EPDM

Pre-Taped Curb Flashing

JM EPDM

Seam Tape Plus

Used to secure EPDM membrane from underneath in perimeters and corners.

60 mil thick, EPDM with a release liner and a 3" or 6" factory laminated, self-adhering EPDM tape to efficiently flash curbs with a consistent, clean appearance.

3" or 6" wide, self-adhering, extruded EPDM pressure-sensitive tape. Each box of JM EPDM Seam Tape Plus includes scrubber pads and handle for seam priming.

GENERAL

Component

Type

Single Ply

Accessory

Membrane Seaming

A

MS

Component

Type

Single Ply

Accessory

Perimeter Reinforcement

A

PR

Component

Type

Single Ply

Accessory

Curb/Corner

A

FC

GENERAL

SIZE SKU

20" × 50' 70009122

JM White EPDM Pre-Taped Curb Flashing 60 mil thick, White EPDM with a release liner and a 3” factory laminated, self-adhering White EPDM tape to efficiently flash curbs with a consistent, clean appearance.

Component

Single Ply

Accessory A

Type

Curb/Corner

FC

SIZE QTY/BOX SKU

3" × 100' 4 Rolls/Box 70009129

6" × 100' 2 Rolls/Box 70009130

JM White EPDM Seam Tape Plus 3” or 6” wide, self-adhering, extruded White EPDM pressure-sensitive tape.

Component

Type

Single Ply

Accessory

Membrane Seaming

A

MS

UV-resistant, polypropylene, needle-punched fabric for use as a slipsheet between the membrane and ballast/pavers.

SIZE SKU

15' × 300' 70000100

JM EPDM

Protective Stone Mat

BALLAST MATS

Component

Type

Single Ply

Accessory

Protection

A

PT

6" wide, 45 mil strip with factory-applied pressure-sensitive tape to secure field membrane at any angle change greater than 2 in/ft.

Cured 6", 9" or 12" wide EPDM strip with a matte finish and factory applied pressure-sensitive tape.

6", 9" or 12" wide, uncured EPDM with a diamond texture n the top side, clear release liner and factory-applied pressure-sensitive tape.

SIZE QTY/BOX SKU

6" × 100' 2 Rolls/Box 70006236

9" × 50' 1 Roll/Box 70006237

12" × 50' 1 Roll/Box 70006238

SIZE QTY/BOX SKU

6" × 100" 2 Rolls/Box 70005569

SIZE QTY/BOX SKU

MIL

6" × 100' 2 Rolls/Box 70004127

9" × 50' 1 Roll/Box 70004128

12" × 50' 1 Roll/Box 70004129

Component

Type

Single Ply

Accessory

Perimeter Reinforcement

A

PR

JM EPDM Peel and Stick Flashing

JM EPDM Peel and Stick Sealing Strip

JM EPDM Reinforced Termination Strip w/ Tape

PEEL AND STICK

Component

Type

Single Ply

Accessory

Flashing Wall

A

FW

Curb/Corner

Penetration

FC

FP

Component

Type

Single Ply

Accessory

Membrane Seaming

A

MS

Finishing Edge

FE

SIZE QTY/PALLET SKU

30" × 30" 50/Pallet 70000104

SIZE QTY/BOX SKU

7" × 9" 20/Box 70004212

SIZE QTY/BOX SKU

1" – 6" 10/Box 70000084

JM EPDM Peel and Stick Walkpad

JM EPDM Peel and Stick Inside/Outside Corner

JM EPDM Peel and Stick Pipe Boot

3⁄8" x 30" x 30" heavy-duty, solid rubber pads with three rows of 3" factory-applied pressure-sensitive tape to protect roofs from damaging foot traffic.

60 mil peel and stick uncured EPDM used to install inside or outside corners.

EPDM manufactured with conical steps and factory-applied pressure-sensitive tape around the base.

Component

Type

Single Ply

Accessory

Protection

A

PT

Component

Type

Single Ply

Accessory A

Curb/Corner

FC

Component

Type

Single Ply

Accessory

Penetration

A

FP

SIZE QTY/BOX SKU

5.75" Round 100/Box 70004211

SIZE QTY/BOX SKU

6" (15.2 cm) Diameter 12/Box 70000093

JM EPDM Peel and Stick T-Joint Patch

JM EPDM Peel and Stick Pourable Sealer Pocket

Round, uncured EPDM with a factory-applied pressure-sensitive tape.

One-piece, prefabricated unit with a factory-applied pressure-sensitive tape on the bottom of the base flange. Use to seal difficult-to-flash penetrations through the membrane.

PEEL AND STICK

Component

Type

Single Ply

Accessory

Membrane Seaming

A

MS

Component

Type

Single Ply

Accessory

Penetration

A

PEEL AND STICK

Cured 6”, 9” or 12” wide White EPDM strip and factory applied pressure-sensitive tape.

6”, 9” or 12” wide, uncured White EPDM with a release liner and a factory laminated, self-adhering White EPDM tape.

SIZE QTY/BOX SKU

6" × 100' 2 Rolls/Box 70009118

9" × 100' 1 Roll/Box 70009119

12" × 50' 1 Roll/Box 70009121

SIZE QTY/BOX SKU

MIL

6" × 100' 2 Rolls/Box 70008833

9" × 50' 1 Roll/Box 70008834

12" × 50' 1 Roll/Box 70008835

JM White EPDM Peel and Stick Flashing

JM White EPDM Peel and Stick Sealing Strip

Component

Type

Single Ply

Accessory

Flashing Wall

A

FW

Curb/Corner

Penetration

FC

FP

Component

Type

Single Ply

Accessory

Membrane Seaming

A

MS

Finishing Edge

FE

SIZE QTY/PALLET SKU

30" × 30" 50/Pallet 70009141

SIZE QTY/BOX SKU

7" × 9" 20/Box 70008896

JM White EPDM Peel and Stick Walkpad

JM White EPDM Peel and Stick Inside/Outside Corner

1/4” x 30” x 30” heavy-duty, white solid rubber pads with three rows of 3” factory-applied pressure-sensitive tape to protect roofs from damaging foot traffic.

60 mil peel and stick uncured White EPDM used to install inside or outside corners. Can be used for either TPO or EPDM.

Component

Type

Single Ply

Accessory

Protection

A

PT

Component

Type

Single Ply

Accessory A

Curb/Corner

FC

SIZE QTY/BOX SKU

1" – 6" 10/Box 70009438

JM White EPDM Peel and Stick Pipe Boot White EPDM manufactured with conical steps and factory-applied pressure-sensitive tape around the base.

Component

Type

Single Ply

Accessory

Penetration

A

PEEL AND STICK

SIZE QTY/BOX SKU

5.75" Round 100/Box 70009123

SIZE QTY/BOX SKU

6" (15.2 cm) Diameter 6/Box 70009124

JM White EPDM Peel and Stick T-Joint Patch

JM White EPDM Peel and Stick Pourable Sealer PocketRound, White uncured EPDM with a factory-applied pressure-sensitive tape.

One-piece, prefabricated unit with a factory-applied pressure-sensitive tape on the bottom of the base flange. Use to seal difficult-to-flash penetrations through the membrane.

Component

Type

Single Ply

Accessory

Membrane Seaming

A

MS

Component

Type

Single Ply

Accessory

Penetration

A

ISO & COVER BOARDS

Our broad line of polyiso insulation products can address your R-value requirements. We are a PIMA member and are audited by their QualityMark program. We have a wide range of facers that cover all ASTM Type II designations, and we offer a full line of composite products.

Adding a cover board enhances the long-term performance of a commercial roofing system. We offer high-density polyiso, low-density polyiso, cement and gypsum cover boards. We’ve got you covered with solutions for all situations you might encounter: a system for high-impact zones, fire-retardant solutions that meet UL Class A requirements, products that do not support mold growth and more.

PVC MEMBRANESPOLYISOCYANURATE

THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

3.0" 48" × 48" 17.4 90000934 90001057

3.0" 48" × 96" 17.4 90000966 90001072

3.1" 48" × 48" 18 90000935 90001969

3.1" 48" × 96" 18 90000967 90001073

3.2" 48" × 48" 18.6 90000936 90001079

3.2" 48" × 96" 18.6 90000968 90002004

3.25" 48" × 48" 18.9 90000937 90012926

3.25" 48" × 96" 18.9 90000969 90012927

3.3" 48" × 48" 19.2 90000938 90001080

3.3" 48" × 96" 19.2 90000970 90001078

3.4" 48" × 48" 19.9 90000939 *

3.4" 48" × 96" 19.9 90000971 90001075

THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

2.5" 48" × 48" 14.4 90000929 90001054

2.5" 48" × 96" 14.4 90000960 90001068

2.6" 48" × 48" 15 90000930 90001055

2.6" 48" × 96" 15 90000961 90001069

2.7" 48" × 48" 15.6 90000931 90002033

2.7" 48" × 96" 15.6 90000962 90001070

2.75" 48" × 48" 15.9 90000932 *

2.75" 48" × 96" 15.9 90000963 90034629

2.8" 48" × 48" 16.2 90000933 90001056

2.8" 48" × 96" 16.2 90000964 90001071

2.9" 48" × 48" 16.8 90001461 *

2.9" 48" × 96" 16.8 90000965 90013366

THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

1.0" 48" × 48" 5.7 90000907 90001043

1.0" 48" × 96" 5.7 90000912 90001045

1.1" 48" × 48" 6.3 90001936 *

1.1" 48" × 96" 6.3 90000913 *

1.2" 48" × 48" 6.8 90000909 *

1.2" 48" × 96" 6.8 90000914 *

1.3" 48" × 48" 7.4 90000910 90001046

1.3" 48" × 96" 7.4 90000915 *

1.4" 48" × 48" 8 90000911 *

1.4" 48" × 96" 8 90000916 *

THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

1.5" 48" × 48" 8.6 90000917 90001047

1.5" 48" × 96" 8.6 90001421 90001060

1.6" 48" × 48" 9.1 90000918 90001048

1.6" 48" × 96" 9.1 90000949 90001061

1.7" 48" × 48" 9.7 90000919 90001049

1.7" 48" × 96" 9.7 90000950 90001062

1.75" 48" × 48" 10 90000920 90001466

1.75" 48" × 96" 10 90000951 90001468

1.8" 48" × 48" 10.3 90000921 90001050

1.8" 48" × 96" 10.3 90000952 90001064

1.9" 48" × 48" 10.8 90001581 90018012

1.9" 48" × 96" 10.8 90000953 90001189

THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

2.0" 48" × 48" 11.4 90000923 90001051

2.0" 48" × 96" 11.4 90000954 90001065

2.1" 48" × 48" 12 90000924 90001671

2.1" 48" × 96" 12 90000955 90001680

2.2" 48" × 48" 12.6 90030034 *

2.2" 48" × 96" 12.6 90030035 90014791

2.25" 48" × 48" 12.9 90000926 90001052

2.25" 48" × 96" 12.9 90000957 90014001

2.3" 48" × 48" 13.2 90000927 90001053

2.3" 48" × 96" 13.2 90000958 90001067

2.4" 48" × 48" 13.8 90000928 90013759

2.4" 48" × 96" 13.8 90000959 90016363

High-thermal, closed-cell polyisocyanurate foam core insulation board with universal fiber glass-reinforced facers.

ENRGY 3

[Flat ]

FLAT

Component

Type

Multi-Ply Single Ply

Insulation

High Thermal

I

HT

1.0" – 1.4"

2.0" – 2.4"

2.5" – 2.9"

3.0" – 3.4"1.5" – 1.9"

TOC

*The absence of a SKU simply means that size has not been produced before, but it can be made upon request. Please call (800) 922-5922 for assistance.

1�The Long-Term Thermal Resistance (LTTR) values were determined in accordance with CAN/ULC S770 at 75°F (24°C). The ultimate R-Value of these products will depend on individual installation circumstances.

THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

3.5" 48" × 48" 20.5 90000940 90001058

3.5" 48" × 96" 20.5 90000972 90001499

3.6" 48" × 48" 21.1 90000941 90015634

3.6" 48" × 96" 21.1 90000973 *

3.7" 48" × 48" 21.7 90000942 90001903

3.7" 48" × 96" 21.7 90000974 90001063

3.8" 48" × 48" 22.3 90000943 90024271

3.8" 48" × 96" 22.3 90000975 90016204

3.9" 48" × 48" 23 90000944 *

3.9" 48" × 96" 23 90000976 *

THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

4.0" 48" × 48" 23.6 90000945 90001059

4.0" 48" × 96" 23.6 90000977 90001077

4.1" 48" × 48" 24.2 90001569 90023904

4.1" 48" × 96" 24.2 90001571 *

4.2" 48" × 48" 24.9 90016800 90028865

4.2" 48" × 96" 24.9 90012663 90028808

4.3" 48" × 48" 25.5 90016263 90016341

4.3" 48" × 96" 25.5 90016271 90016342

4.4" 48" × 48" 26.1 90016801 *

4.4" 48" × 96" 26.1 90016802 *

4.5" 48" × 48" 26.8 90000986 90016165

4.5" 48" × 96" 26.8 90000978 90001500

3.5” – 3.9”

4.0” – 4.5”

FLAT

TOC

ENRGY 3

[Flat ] (continued)

*The absence of a SKU simply means that size has not been produced before, but it can be made upon request. Please call (800) 922-5922 for assistance.

1�The Long-Term Thermal Resistance (LTTR) values were determined in accordance with CAN/ULC S770 at 75°F (24°C). The ultimate R-Value of these products

‡ THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

J 1.0 – 1.75" 48" × 48" 7.8 90001166 90015315

JJ 0.50 – 1.25" 48" × 48" 5 90001167 90012335

K 1.75 – 2.5" 48" × 48" 12.1 90001168 90015316

KK 1.25 – 2.0" 48" × 48" 9.3 90001169 90012336

L 2.5 – 3.25" 48" × 48" 16.6 90001464 90015317

LL 2.0 – 2.75" 48" × 48" 13.6 90001669 *

M 3.25 – 4.0" 48" × 48" 21.2 90001465 90015318

3/16” PER FOOT SLOPE

‡ THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

1A 0.50 – 0.75" 48" × 48" 3.6 90001137 90001109

1B 0.75 – 1.0" 48" × 48" 5 90001138 90001110

1 1.0 – 1.25" 48" × 48" 6.4 90001157 90001105

2 1.25 – 1.5" 48" × 48" 7.8 90001134 90001106

3 1.5 – 1.75" 48" × 48" 9.3 90001135 90001107

4 1.75 – 2.0" 48" × 48" 10.7 90001136 90001108

5 2.0 – 2.25" 48" × 48" 12.1 90002034 90023429

6 2.25 – 2.5" 48" × 48" 13.6 90002035 90023430

‡ THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

AA 0.50 – 1.0" 48" × 48" 4.3 90001159 90001124

A 1.0 – 1.5" 48" × 48" 7.1 90001158 90001122

B 1.5 – 2.0" 48" × 48" 10 90001160 90001126

C 2.0 – 2.5" 48" × 48" 12.9 90001162 90001128

D 2.5 – 3.0" 48" × 48" 15.9 90001163 90001129

E 3.0 – 3.5" 48" × 48" 18.9 90001164 90001130

F 3.5 – 4.0" 48" × 48" 22.1 90001165 90001926

FF 4.0 – 4.5" 48" × 48" 25.3 90002005 90001985

1/8" PER FOOT SLOPE

High-thermal, closed-cell polyisocyanurate foam core insulation board with universal fiber glass-reinforced facers.

ENRGY 3

[Tapered]

TAPERED

Component

Type

Multi-Ply Single Ply

Insulation

High Thermal

I

HT

Tapered

TP

‡ Panel designation.

*The absence of a SKU simply means that size has not been produced before, but it can be made upon request. Please call (800) 922-5922 for assistance.

1�The Long-Term Thermal Resistance (LTTR) values were determined in accordance with CAN/ULC S770 at 75°F (24°C). The ultimate R-Value of these products will depend on individual installation circumstances.

(All panels special order)

0.5" 0.75" 1.0" 1.25" 1.5" 1.75" 2.0" 2.25" 2.5" 2.75" 3.0"

1A 1B 1 2 3 4 5 6

1A 1B

2.0" Filler

1/16" PER FOOT SLOPE

0.5" 1.0" 1.5" 2.0" 2.5" 3.0" 3.5" 4.0" 4.5" 5.0" 5.5"

AA A B C D E F FF

AA

AA

A

A

4.0" Filler

2.0" Filler

(Extended and special order panels: D, E, F, FF)

0.5" 1.25" 2.0" 2.75" 3.5" 4.25" 5.0"

JJ KK LL MM

JJ

3.0" Filler

KK

1.0" 1.75" 2.5" 3.25" 4.0" 4.75" 5.5"

J K L M

J

3.0" Filler

K

(All panels special order)

(All panels special order)

3/8" PER FOOT SLOPE

1/2" PER FOOT SLOPE

1/4" PER FOOT SLOPE

‡ THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI) X 0.50 – 1.5" 48" × 48" 5.7 90001148 90001115

G 1.0 – 2.0" 48" × 48" 8.6 90001145 90001116

Y 1.5 – 2.5" 48" × 48" 11.4 90001149 90001117

H 2.0 – 3.0" 48" × 48" 14.4 90001149 90027634

Z 2.5 – 3.5" 48" × 48" 17.4 90001151 90001119

I 3.0 – 4.0" 48" × 48" 20.5 90001147 90001120

ZZ 3.5 – 4.5" 48" × 48" 23.6 90001967 90013779

‡ THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

Q 0.50 – 2.5" 48" × 48" 8.6 90001140 90001114

QQ 2.5 – 4.5" 48" × 48" 20.5 90001144 90013607

XX 1.0 – 3.0" 48" × 48" 11.4 90001141 90001113

‡ THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

SS 0.50 – 2.0" 48" × 48" 7.1 90001170 90001112

TT 2.0 – 3.5" 48" × 48" 15.9 90001171 90001133

TAPERED

1.0" 2.0" 3.0" 4.0" 5.0" 6.0"

G H I

G

3.0" Filler

H

0.5" 1.50" 2.5" 3.5" 4.5" 5.5" 6.5"

X Y Z ZZ

X

X

4.0" Filler

2.0" Filler Y

Y

(Extended and special order panels: Z, ZZ)

(All panels special order)

(All panels special order)

0.5" 2.0" 3.5" 5.0" 6.5"

SS TT

SS

3.0" Filler

TT

0.5"

Q

Q

QQ

4.0" Fill Q XX 2.0"2.0"

XXQ

2.5" 4.5" 6.5" 0.5" 2.5" 4.5" 1.0" 3.0" 5.0"

(Special order)

(Extended and special order panels: QQ)

‡ Panel designation.

1�The Long-Term Thermal Resistance (LTTR) values were determined in accordance with CAN/ULC S770 at 75°F (24°C). The ultimate R-Value of these products will depend on individual installation circumstances.

ENRGY 3

[Tapered ] (continued)

THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

3.1" 48" × 48" 18 90016356 *

3.1" 48" × 96" 18 90016357 *

3.2" 48" × 48" 18.6 90016115 90021851

3.2" 48" × 96" 18.6 90017491 90017587

3.3" 48" × 48" 19.2 90015855 90025997

3.3" 48" × 96" 19.2 90015307 90025198

3.4" 48" × 48" 19.9 90037816 *

3.4" 48" × 96" 19.9 90026435 *

3.5" 48" × 48" 20.5 90015356 90022815

3.5" 48" × 96" 20.5 90017488 90026301

THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

2.7" 48" × 48" 15.6 90029535 *

2.7" 48" × 96" 15.6 90022068 90039633

2.75" 48" × 48" 15.9 90027853 *

2.75" 48" × 96" 15.9 90018447 *

2.8" 48" × 48" 16.2 90023428 90018554

2.8" 48" × 96" 16.2 90016297 90018555

2.9" 48" × 48" 16.8 90029494 *

3.0" 48" × 48" 17.4 90015355 90015680

3.0" 48" × 96" 17.4 90016054 90022939

THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

1.0" 48" × 48" 5.7 90015352 90017566

1.0" 48" × 96" 5.7 90017474 90017479

1.1" 48" × 96" 6.3 90017943 *

1.2" 48" × 96" 6.8 90028795 *

1.25" 48" × 48" 7.1 90024222 *

1.25" 48" × 96" 7.1 90023241 *

1.5" 48" × 48" 8.6 90015389 90016803

1.5" 48" × 96" 8.6 90015057 90015065

1.6" 48" × 96" 9.1 90017489 *

THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

1.7" 48" × 48" 9.7 90017900 90021918

1.7" 48" × 96" 9.7 90015802 90037763

1.75" 48" × 48" 10 90016348 90023081

1.75" 48" × 96" 10 90016351 90023082

1.8" 48" × 48" 10.3 90016350 90029700

1.8" 48" × 96" 10.3 90016352 90021830

1.9" 48" × 96" 10.8 90026756 *

2.0" 48" × 48" 11.4 90015434 90015510

2.0" 48" × 96" 11.4 90016053 90016057

THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

2.1" 48" × 48" 12 90029675 90029269

2.1" 48" × 96" 12 90024257 *

2.25" 48" × 96" 12.9 90021700 *

2.3" 48" × 48" 13.2 90029327 *

2.3" 48" × 96" 13.2 90026412 *

2.4" 48" × 48" 13.8 90037430 90017553

2.4" 48" × 96" 13.8 90031498 90017554

2.5" 48" × 48" 14.4 90015354 90017561

2.5" 48" × 96" 14.4 90015058 90015064

2.6" 48" × 48" 15 90016355 90017952

2.6" 48" × 96" 15 90016300 90017586

1.0" – 1.6"

2.1" – 2.6"

2.7" – 3.0"

3.1" – 3.5"

1.7" – 2.0"

Closed-cell polyisocyanurate foam core with an inorganic-coated glass facer on each side. It offers high R-value per inch and achieves a UL Class A approval in select systems.

ENRGY 3

CGF [Flat ]

FLAT

Component

Type

Multi-Ply Single Ply

Insulation

High Thermal

I

HT

TOC

*The absence of a SKU simply means that size has not been produced before, but it can be made upon request. Please call (800) 922-5922 for assistance.

1�The Long-Term Thermal Resistance (LTTR) values were determined in accordance with CAN/ULC S770 at 75°F (24°C). The ultimate R-Value of these products

THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

3.6" 48" × 48" 21.1 90017532 *

3.6" 48" × 96" 21.1 90017573 *

3.7" 48" × 48" 21.7 90030117 90018557

3.75" 48" × 48" 22 90039057 *

3.75" 48" × 96" 22 90034229 *

3.8" 48" × 96" 22.3 90040352 *

4.0" 48" × 48" 23.6 90015649 90015648

4.0" 48" × 96" 23.6 90015823 90025922

4.3" 48" × 48" 25.5 90027536 *

4.3" 48" × 96" 25.5 90029722 *

4.4" 48" × 48" 26.1 90026439 *

4.5" 48" × 96" 26.8 90029467 *

3.6” – 4.5”

FLAT

ENRGY 3

CGF [Flat ] (continued)

TOC

*The absence of a SKU simply means that size has not been produced before, but it can be made upon request. Please call (800) 922-5922 for assistance.

1�The Long-Term Thermal Resistance (LTTR) values were determined in accordance with CAN/ULC S770 at 75°F (24°C). The ultimate R-Value of these products

39TOC

Closed-cell polyisocyanurate foam core with an inorganic-coated glass facer on each side. It offers high R-value per inch and achieves a UL Class A approval in select systems.

ENRGY 3

CGF [Tapered]

TAPERED

Component

Type

Multi-Ply Single Ply

Insulation

High Thermal

I

HT

Tapered

TP

‡ THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

J 1.0 – 1.75" 48" × 48" 7.8 * *

JJ 0.50 – 1.25" 48" × 48" 5 90024834 90025239

K 1.75 – 2.5" 48" × 48" 12.1 * *

KK 1.25 – 2.0" 48" × 48" 9.3 90024836 90025240

L 2.5 – 3.25" 48" × 48" 16.6 * *

LL 2.0 – 2.75" 48" × 48" 13.6 90026282 *

M 3.25 – 4.0" 48" × 48" 21.2 * *

3/16” PER FOOT SLOPE

‡ THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

1A 0.50 – 0.75" 48" × 48" 3.6 90026308 *

1B 0.75 – 1.0" 48" × 48" 5 90026309 *

1 1.0 – 1.25" 48" × 48" 6.4 90026310 *

2 1.25 – 1.5" 48" × 48" 7.8 90026311 *

3 1.5 – 1.75" 48" × 48" 9.3 90026312 *

4 1.75 – 2.0" 48" × 48" 10.7 90026313 *

5 2.0 – 2.25" 48" × 48" 12.1 90026314 *

6 2.25 – 2.5" 48" × 48" 13.6 90026315 *

‡ THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

AA 0.50 – 1.0" 48" × 48" 4.3 90015357 90015670

A 1.0 – 1.5" 48" × 48" 7.1 90015368 *

B 1.5 – 2.0" 48" × 48" 10 90015672 90015659

C 2.0 – 2.5" 48" × 48" 12.9 90015673 90015641

D 2.5 – 3.0" 48" × 48" 15.9 90015674 90015642

E 3.0 – 3.5" 48" × 48" 18.9 90015643 90015677

F 3.5 – 4.0" 48" × 48" 22.1 90015678 90015644

FF 4.0 – 4.5" 48" × 48" 25.3 90015679 90015647

1/8" PER FOOT SLOPE

(All panels special order)

0.5" 0.75" 1.0" 1.25" 1.5" 1.75" 2.0" 2.25" 2.5" 2.75" 3.0"

1A 1B 1 2 3 4 5 6

1A 1B

2.0" Filler

1/16" PER FOOT SLOPE

0.5" 1.0" 1.5" 2.0" 2.5" 3.0" 3.5" 4.0" 4.5" 5.0" 5.5"

AA A B C D E F FF

AA

AA

A

A

4.0" Filler

2.0" Filler

(Extended and special order panels: D, E, F, FF)

0.5" 1.25" 2.0" 2.75" 3.5" 4.25" 5.0"

JJ KK LL MM

JJ

3.0" Filler

KK

1.0" 1.75" 2.5" 3.25" 4.0" 4.75" 5.5"

J K L M

J

3.0" Filler

K

(All panels special order)

(All panels special order)

‡ Panel designation.

*The absence of a SKU simply means that size has not been produced before, but it can be made upon request. Please call (800) 922-5922 for assistance.

1�The Long-Term Thermal Resistance (LTTR) values were determined in accordance with CAN/ULC S770 at 75°F (24°C). The ultimate R-Value of these products

TAPERED

3/8" PER FOOT SLOPE

1/2" PER FOOT SLOPE

1/4" PER FOOT SLOPE

‡ THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI) X 0.50 – 1.5" 48" × 48" 5.7 90015359 90015908

G 1.0 – 2.0" 48" × 48" 8.6 90015720 90021920

Y 1.5 – 2.5" 48" × 48" 11.4 90015431 90015909

H 2.0 – 3.0" 48" × 48" 14.4 90017432 90021921

Z 2.5 – 3.5" 48" × 48" 17.4 90021690 90021852

I 3.0 – 4.0" 48" × 48" 20.5 90025166 *

ZZ 3.5 – 4.5" 48" × 48" 23.6 90021691 90021854

‡ THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

Q 0.50 – 2.5" 48" × 48" 8.6 90015433 90015515

QQ 2.5 – 4.5" 48" × 48" 20.5 90021692 90023043

XX 1.0 – 3.0" 48" × 48" 11.4 * *

‡ THICKNESS SIZE LTTR-VALUE

1 SKU (Grade 2 20PSI) SKU (Grade 3 25PSI)

SS 0.50 – 2.0" 48" × 48" 7.1 90029549 90016108

TT 2.0 – 3.5" 48" × 48" 15.9 90029550 90022938

1.0" 2.0" 3.0" 4.0" 5.0" 6.0"

G H I

G

3.0" Filler

H

0.5" 1.50" 2.5" 3.5" 4.5" 5.5" 6.5"

X Y Z ZZ

X

X

4.0" Filler

2.0" Filler Y

Y

(Extended and special order panels: Z, ZZ)

(All panels special order)

(All panels special order)

0.5" 2.0" 3.5" 5.0" 6.5"

SS TT

SS

3.0" Filler

TT

0.5"

Q

Q

QQ

4.0" Fill Q XX 2.0"2.0"

XXQ

2.5" 4.5" 6.5" 0.5" 2.5" 4.5" 1.0" 3.0" 5.0"

(Special order)

(Extended and special order panels: QQ)

ENRGY 3

CGF [Tapered ] (continued)

TOC

‡ Panel designation.

*The absence of a SKU simply means that size has not been produced before, but it can be made upon request. Please call (800) 922-5922 for assistance.

1�The Long-Term Thermal Resistance (LTTR) values were determined in accordance with CAN/ULC S770 at 75°F (24°C). The ultimate R-Value of these products

PVC MEMBRANESROOF BOARDS

THICKNESS SIZE SKU

1/4" 4' × 4' 70000786

1/4" 4' × 8' 70000793

3/8" 4' × 4' 70000795

3/8" 4' × 8' 70000794

1/2" 4' × 4' 70000784

1/2" 4' × 8' 70000790

5/8" 4' × 4' 70000759

5/8" 4' × 8' 70000791

SECUROCK

Gypsum- Fiber Roof Board Gypsum- and cellulose-fiber roof board with integral water-resistant core.

GYPSUM-FIBER

Component

Type

Multi-Ply Single Ply

Cover Board B

Gypsum

GY

Low Thermal

LT

THICKNESS SIZE SKU

5/8" 4' × 4' 70006777

5/8" 4' × 8' 70006778

THICKNESS SIZE SKU

1/4" 4' × 4' 70004311

1/4" 4' × 8' 70004314

1/2" 4' × 4' 70004312

1/2" 4' × 8' 70004315

5/8" 4' × 4' 70004313

5/8" 4' × 8' 70004316

THICKNESS SIZE SKU

1/4" 4' × 4' 70004775

1/4" 4' × 8' 70004778

1/2" 4' × 4' 70004776

1/2" 4' × 8' 70004779

5/8" 4' × 4' 70004777

5/8" 4' × 8' 70004780

DensDeck® Prime Roof Board

DEXcell

FA Glass-Mat Roof Board

DensDeck® StormX

Prime Roof Board

Enhanced coated glass mat faced gypsum cover board ideal for fully adhered systems provides a broader compatibility and higher performance with roofing adhesives.

Gypsum Cover Board with heavy duty coated fiberglass facer ideal for fully adhered systems improves handling and strength. Scores and snaps easily.

This gypsum cover board is enhanced with a coated glass-mat facer that achieves FM Very Severe Hail (VHS) approval rating.

PRIMED

Component

Type

Multi-Ply Single Ply

Cover Board B

Gypsum

GY

Low Thermal

LT

Component

Type

Multi-Ply Single Ply

Cover Board B

Gypsum

GY

Low Thermal

LT

Component

Type

Multi-Ply Single Ply

Cover Board B

Gypsum

GY

Low Thermal

THICKNESS SIZE SKU

1/4" 4' × 8' 70004287

1/2" 4' × 8' 70004288

5/8" 4' × 8' 70004289

THICKNESS SIZE SKU

1/4" 4' × 8' 70000796

1/2" 4' × 8' 70000797

5/8" 4' × 8' 70000798

THICKNESS SIZE SKU

1/4" 4' × 4' 70004769

1/4" 4' × 8' 70004772

1/2" 4' × 4' 70004770

1/2" 4' × 8' 70004773

5/8" 4' × 4' 70004771

5/8" 4' × 8' 70004774

DensDeck® Roof Board

SECUROCK

Ultralight Glass-Mat Roof Board

DEXcell

Glass-Mat Roof Board

Glass-mat-faced gypsum cover board. Glass-mat-reinforced roof board with fiber glass facer and back. Unmatched mat-to-core tensile bond strength, easy to cut and has reduced facer delamination.

Gypsum cover board with coated fiberglass facer ideal for mechanically fastened systems improves handling and strength. Scores and snaps easily.

GLASS-FACED

Component

Type

Single Ply

Cover Board B

Gypsum

GY

Low Thermal

LT

Component

Type

Single Ply

Cover Board B

Gypsum

GY

Low Thermal

LT

Component

Type

Multi-Ply Single Ply

Cover Board B

Gypsum

GY

Low Thermal

LT

TOC

THICKNESS SIZE SKU

5/8” 4' × 4' 70008750

5/8” 4' × 8' 70008751

DEXcell

FA VSH

Glass-Mat Roof Board Gypsum cover board with coated fiberglass facer ideal for mechanically fastened systems improves handling and strength. Achieves FM Very Severe Hail (VSH) requirements.

Component

Type

Single Ply

Cover Board B

Gypsum

GY

Low Thermal

THICKNESS SIZE SKU

7/16" 4' × 4' 70004781

7/16" 4' × 8' 70004782

THICKNESS SIZE SKU

1/2" 4' × 4' 70004249

1/2" 4' × 8' 70004250

DEXcell

Cement Roof Board

SECUROCK

Cement Roof Board

Cement and glass mesh cover board. Provides exceptional impact resistance.

Aggregated Portland cement slurry with polymer-coated, glass-fiber mesh. Ideal for liquid applied membrane roof systems.

CEMENT

Component

Type

Multi-Ply Single Ply

Cover Board B

Cement

CM

Low Thermal

LT

Component

Type

Multi-Ply Single Ply

Cover Board B

Cement

CM

Low Thermal

PVC MEMBRANESCOVER BOARDS

THICKNESS SIZE SKU

1/2" 48" × 48" 90027899

1/2" 48" × 96" 90027900

RetroPlus™ Roof Board

ProtectoR

HD

High-density, expanded, perlite-based cover board engineered to optimize system performance across all applications.

1/2" high-density polyisocyanurate cover board with lightweight formula offers labor and installation efficiencies and allows more options for situations where the overall weight is a concern. The high R-value (2.5 R) provides significantly more thermal insulation than wood fiber or gypsum boards.

HIGH DENSITY

THICKNESS SIZE SKU

1/2" 4' × 4' 90002007

1/2" 4' × 8' 90002008

Component

Type

Multi-Ply Single Ply

Cover Board B

Perlite

PL

Low Thermal

LT

High Density

HD

Component

Type

Multi-Ply Single Ply

Cover Board B

Poly Foam

PF

High Density

HD

PVC MEMBRANESCOVER BOARDS

THICKNESS SIZE SKU

1/2" 48" × 48" 90024356

1/2" 48" × 96" 90024357

THICKNESS SIZE SKU

1/2" 48" × 48" 90027858

1/2" 48" × 96" 90027859

SeparatoR

SeparatoR

CGF

Re-cover board with closed cell polyisocyanurate foam core provides high R-value per inch, light weight and flexibility in re-cover and metal retrofit applications.

Inorganic re-roof cover board with closed cell polyisocyanurate foam technology that provides additional insulation value with lightweight and low water absorption characteristics.

POLYISO

Component

Type

Single Ply

Cover Board B

Poly Foam

PF

High Thermal

HT

Component

Type

Single Ply

Cover Board B

Poly Foam

PF

High Thermal

HT

PVC MEMBRANESVAPOR BARRIERS

SIZE SKU

39" × 105' 90029573

JM Vapor Barrier SA JM Vapor Barrier SAR

Polyethylene-reinforced, self-adhering SBS vapor barrier.

Fiber glass-reinforced, polyethylene-surfaced, self-adhering SBS vapor barrier.

Component

Type

Multi-Ply

Membrane M

Protection

PT

Component

Type

Multi-Ply

Membrane M

Protection

PT

SIZE SKU

45" × 134' 70001673

FASTENERS & PLATES

PVC MEMBRANESFASTENERS and PLATES

SIZE HEAD QTY/BOX SKU

1 5/8" Phillips 1,000/Box 70000147

2 1/4" Phillips 1,000/Box 70000148

3" Phillips 1,000/Box 70002653

4" Phillips 1,000/Box 70002660

5" Phillips 1,000/Box 70000153

6" Phillips 1,000/Box 70000154

7" Phillips 1,000/Box 70000155

8" Phillips 1,000/Box 70000156

SIZE…