Basic schematics for the vacuum chamber.pdf
PDF 125 KB Posted
- Attached to
- CHIPS R&D Custom Diffractometry and Fourier Ptychography Endstation Federal contract opportunity
- Solicitation number
- 1333ND26QNB030236
About this file
This is a technical specification document for a vacuum chamber assembly, consisting of detailed schematic drawings and dimensional requirements.
The vacuum chamber is a rectangular box structure with internal dimensions of 40 inches width and external dimensions of approximately 41.6 inches. The chamber features six surfaces: a top, bottom, and four sides (A, B, C, and D). The top is an aluminum flange with 5/8-13 helicoil inserts for lifting purposes, drawn to fit chamber lip dimensions of 44" x 44". The chamber interior accommodates various vacuum ports and feedthroughs across all sides. Side A includes ISO-63, ISO-100, and KF-40 ports with specific spacing of 6.5 and 6.65 inches. Side B contains two ISO-200 ports and one ISO-160 port with 10-inch spacing and a KF-40 port. Side C mirrors the port configuration with two ISO-200 ports, one ISO-63, one ISO-100, and one KF-40 port. Side D features two ISO-200 ports, one ISO-160, and one KF-40 port. The chamber includes an ISO-250 blank plate and requires vacuum feedthroughs for stages with blank plates for remaining ports. The bottom view indicates provisions for kinematics and breadboard attachment. The document specifies that all dimensions should be sized to correct fit for vacuum requirements, with the upper lip drawn at 44" x 2" and external width at 41.6" x 41.6".
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 1333ND26QNB030236updated.pdf | ||
| NIST Questions and Answers.docx | DOCX document | |
| Updated basic schematics for the Endstation.pdf | ||
| 1333ND26QNB030236.pdf | ||
| Attachment 2- Applicable Provisions and Clauses.docx | DOCX document | |
| Solicitation_1333ND26QNB680229.docx | DOCX document | |
| Statement of Work.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TOP
SIDE A
SIDE C
(not shown)
SIDE D
(not shown)
Bottom (not shown)
Schematic of vacuum chamber
Vacuum chamber – top view into chamber Vacuum chamber – top Aluminum flange
Insert 5/8-11 helicoils for lifting
Internal width – 40” Corner rounding as needed
Drawn with upper lip 44” x 44” – size to correct fit Drawn with width 44” x 44” – size to chamber lip
ISO-250
Include ISO-250 blank plate also
TOP
Insert 5/8-13 helicoils for lifting
Vacuum chamber – size views
Drawn with upper lip 44” x 2” – size to correct fit for vacuum requirements
ISO-63
ISO-100
6.5”
13”SIDE A SIDE B
SIDE C SIDE D
9”
ISO-160
ISO-200 ISO-200
9”
10”10”
9”
ISO-160
ISO-200 ISO-200
9”
10”10”
9”
ISO-200 ISO-200
9”
10”10”
5”
5”
KF-40
6.65”
KF-40
KF-40
Include vacuum feedthroughs for stages, blank plates for remaining ports.
ISO-63
ISO-100
6.5”
KF-40
6.65”
13”
(Make it attachable to the table below)
Kinematics For breadboard
Vacuum chamber – TOP VIEW at bottom of chamber Vacuum chamber – BOTTOM VIEW
External width drawn as 41.6”, size to correct fit Drawn with width 41.6” x 41.6” – size to correct fit
BOTTOM
| Slide 1 |
| Slide 2 |
| Slide 3 |
| Slide 4 |
File details come from the government source that posted it. Updated .