SetteDrydockingWorksheet_0005.pdf
PDF 72 KB Posted
- Solicitation number
- 1305M224Q0182
About this file
This document is a Dry Docking Worksheet related to a federal contract opportunity for drydocking repairs to the NOAA ship Oscar Elton Sette.
The worksheet includes details about the ship's characteristics, the required and available services at the drydock facility, and safety response plans. It requires the offeror to provide a list of vessels drydocked at the facility over the past 2 years and describe any accidents experienced in drydocking operations over the past 5 years. The worksheet must be completed and certified by an authorized shipyard official.
The related federal contract opportunity is Solicitation Number 1305M224Q0182 for FY25 Drydock Repairs to the NOAA Ship Oscar Elton Sette, issued by the National Oceanic and Atmospheric Administration (NOAA). The contract will be for drydocking repairs to the ship.
View the file
Other files
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Dry Docking Worksheet
Ship name: Oscar Elton Sette Hull No: R335
PART A (to be completed by NOAA) PART B (to be completed by ALL shipyards) Drydock Certification / Classification Info
Shipyard name Drydock No.
Drydock Type Graving Floating Marine Railway
Certified? Yes No
Certifying / Classifying Agency
Certificate No.
Date of expiration
UShip Characteristics UProvide data in English Units:
Length, overall 224 ft - in UDrydock Characteristics Breadth, molded 43 ft - in Length, overall ft-in
Draft, summer load line 15 ft - 1 in Breadth ft-in
Gross Tonnage (U. S.) T
Displacement, Full Load 2299 LT Maximum drydock lift capability
LT
UMinimum Displacement/Draft
Displacement 1542 LT
Draft - forward 14 ft - 11 in Maximum entry draft rating:
LT
Draft - aft 14 ft - 11 in
Max stern trim for graving dock ft - in Water depths around dock ft-in
Docking Position 1 area and approaches, tidal conditions, UAnticipated Arrival Draft and any unusual conditions for entering/
Draft - forward ft - in leaving the drydock.
Draft - aft ft - in
Depth Over Floor ft-in
UPositioning Clearances Depth Over Blocks ft-in
Bottom: keel to drydock floor
6 ft - in Depth Over Sill ft-in
Side: hull to drydock wall 6 ft - in
ULoading Pressures
Max block loading 10.4 LT per sq. ft.
Note: All blocks to be positioned under longitudinal strength members and transverse bulkheads.
UMax Block Loading Capability
0BBlocking Requirements Block Capability LT/ft2 Construction hard Keel & Side Block
Information
Cap material Soft Construction Cap thickness (min) 2 in Cap Material Side blocks (e.g., shaped, wedged, etc.)
Sha ped
Cap Thickness in
Block Age yrs Hardwood: White Oak, California Laurel, Oregon Myrtle, Iron bark, Blue Gum, American Rock Elm or Preserved Red Oak
Height ft-in
. Width ft-in Softwood: Douglas Fir, Tamarack, Long Leaf Pine or Hemlock
Length ft-in
Minimum Required Services Minimum Available Services
Electrical power Electrical power AC volts 450 VAC AC volts VAC number of phases 3 number of phases amperage (total) 800 amps amperage (total) amps frequency 60 Hz frequency Hz number of lines 2 number of lines
Ground connections Ground connections number 1 number cable size, each 250 cir mils cable size, each cir mils
Sewage connections Sewage connections number 1 number pipe size 2 inch ips pipe size inch ips capacity gals per day capacity gal/day
Fire Main Fire Main number of connections 1 number of connections connection size 2.5 inch ips connection size inch ips pressure 100 psig pressure psig capacity 500 gals per min capacity gpm
Aux Seawater Aux Seawater pressure 70 psig pressure psig capacity 600 gals per min capacity gpm
Fresh Water Fresh Water pressure 40 psig pressure psig capacity LT per day capacity gpm
Compressed Air Compressed Air pressure 100 psig pressure psig capacity cu ft per min capacity cfm
Shore Steam Shore Steam pressure psig pressure psig capacity lbs per hour capacity lb/hr
High Pressure Water Wash pressure
1200 psig High Pressure Water Wash pressure psig
Safety Response Plans Required
Safety Response Plans Available (circle correct answer)
Firefighting Yes X No Firefighting Yes No Flooding (accidental) Yes X No Flooding (accidental) Yes No Earthquake Yes No X Earthquake Yes No Typhoon Yes No X Typhoon Yes No
PART D (to be completed by ALL Shipyards)
1. The Offeror shall provide a list of the vessels (and their principal characteristics) drydocked in this drydock over the past 2 years. (Attach a separate page)
2. The Offeror shall describe the nature and cause of accidents experienced by the shipyard in drydocking operations over the past 5 years. The Offeror shall describe corrective action taken or practices implemented to prevent recurrence of accident. (Attach a separate page)
I hereby certify that the above information is true and accurate.
Name and Title of Shipyard Official
Signature of Shipyard Official
Date
PART C (to be completed by Shipyard if drydock is not certified by IACS or under MIL STD 1625C)
Dockmaster info Contractor name Dockmaster name Certifying Agency Certificate No.
Years experience
Drydock Insurance Info
Is Drydock insured? Yes No Insurer Policy No.
Amount Insured Date of expiration
Blocking Requirements
File details come from the government source that posted it. Updated .