096800 CARPET and FLOORING.doc
DOC document 47 KB Posted
- Solicitation number
- 520-22-3-7072-0001
About this file
This document contains a technical specification for carpet and flooring installation and a related federal contract solicitation to repair elevators in multiple buildings. The technical specification outlines requirements for carpet materials, including physical characteristics, static control properties, density, flame resistance, and warranties. It also specifies edge strips, adhesives, and installation procedures. The related solicitation is for project 520-22-170 to repair elevators in multiple buildings in Biloxi, Mississippi, issued by the Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 16. Responses are due under solicitation number 520-22-3-7072-0001. The work includes all labor, tools, materials, equipment, and supervision to perform elevator repairs.
View the file
Other files
Show 40 more
Latest 50 of 79 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
520-22-170
SECTION 09 68 00
CARPET and floor coverings
PART 1 - GENERAL
1.1 Description
Section specifies carpet, edge strips, adhesives, and other items required for complete installation.
1.2 Quality assurance
1.
Carpet installed by mechanics certified by the Floor Covering Installation Board.
2.
Certify and label the carpet that it has been tested and meets criteria of CRI IAQ Carpet Testing Program for indoor air quality.
1.3 SUBMITTALS
A.
Submit in accordance with Section 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES.
B.
Product Data:
1.
Manufacturer’s catalog data and printed documentation stating physical characteristics, durability, resistance to fading and flame resistance characteristics for each type of carpet material and installation accessory.
2.
Manufacturer’s printed installation instructions for the carpet, including preparation of installation substrate, seaming techniques and recommended adhesives and tapes.
3.
Manufacturer’s certificate verifying carpet containing recycled materials include percentage of recycled materials as specified.
C.
Samples:
1.
Carpet: "Production Quality" samples 300 x 300 mm (12 x 12 inches) of carpets, showing quality, pattern and color specified in Section 09 06 00, SCHEDULE FOR FINISHES
2.
Floor Edge Strip (Molding): 150 mm (6 inches) long of each color and type specified.
3.
Base Edge Strip (Molding): 150 mm (6 inches) long of each color specified.
D.
Shop Drawings: Installers layout plan showing seams and cuts for sheet carpet and carpet module.
E.
Maintenance Data: Carpet manufacturer’s maintenance instructions describing recommended type of cleaning equipment and material, spotting and cleaning methods and cleaning cycles.
1.4 delivery and storage
A.
Deliver carpet in manufacturer’s original wrappings and packages clearly labeled with manufacturer’s name, brand, name, size, dye lot number and related information.
B.
Deliver adhesives in containers clearly labeled with manufacturer’s name, brand name, number, installation instructions, safety instructions and flash points.
C.
Store in a clean, dry, well ventilated area, protected from damage and soiling. Maintain storage space at a temperature above 16 degrees C (60 degrees F) for 2 days prior to installation.
1.5 environmental requirements
Areas in which carpeting is to be installed shall be maintained at a temperature above 16 degrees C (60 degrees F) for 2 days before installation, during installation and for 2 days after installation. A minimum temperature of 13 degrees C (55 degrees F) shall be maintained thereafter for the duration of the contract. Traffic or movement of furniture or equipment in carpeted area shall not be permitted for 24 hours after installation. Other work which would damage the carpet shall be completed prior to installation of carpet.
1.6 warranty
Carpet and installation subject to terms of "Warranty of Construction" article in Section 00 72 00, GENERAL CONDITIONS except that warranty period is extended to two years.
1.7 APPLICABLE PUBLICATIONS
A.
Publication listed below form a part of this specification to extent referenced. Publications are referenced in text by basic designation only.
B.
American Association of Textile Chemists and Colorists (AATCC):
AATCC 16-98
Colorfastness to Light
AATCC 129-01
Colorfastness to Ozone in the Atmosphere under High Humidities
AATCC 134-01
Electric Static Propensity of Carpets
AATCC 165-99
Colorfastness to Crocking: Carpets-AATCC Crockmeter Method
C.
American Society for Testing and Materials (ASTM):
ASTM D1335-98
Tuft Bind of Pile Yarn Floor Coverings
ASTM D3278-97
Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM D5252-98
Operation of the Hexapod Tumble Drum Tester
ASTM D5417-99
Operation of the Vettermann Drum Tester
ASTM E648-00
Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
D.
The Carpet and Rug Institute (CRI):
CRI 104-96
Installation of Commercial Carpet
PART 2 - PRODUCTS
2.1 CARPET
A.
Physical Characteristics:
1.
Carpet free of visual blemishes, streaks, poorly dyed areas, fuzzing of pile yarn, spots or stains and other physical and manufacturing defects.
2. Manufacturers standard construction commercial carpet:
a.
Modular Tile: 660 mm (18 inches) square tile.
3. Provide static control to permanently control static build upto less than 2.0 kV when tested at 20 percent relative humidity and 21 degrees C (70 degrees F) in accordance with AATCC 134.
4.
Pile Height: Maximum 3.25 mm (0.10 inch).
5.
Pile Fiber: Nylon with recycled content 25 percent minimum branded (federally registered trademark).
6.
Pile Type: Level Loop.
7.
Backing materials: Manufacturer’s unitary backing designed for glue-down installation using recovered materials.
8.
Appearance Retention Rating (ARR): Carpet shall be tested and have the minimum 3.5-4.0 Severe ARR when tested in accordance with either the ASTM D 5252 (Hexapod) or ASTM D 5417 (Vettermann) test methods using the number of cycles for short and long term tests as specified.
9.
Tuft Bind: Minimum force of 40 N (10 lb) required to pull a tuft or loop free from carpet backing. Test per ASTM D1335.
10. Colorfastness to Crocking: Dry and wet crocking and water bleed, comply with AATCC 165 Color Transference Chart for colors, minimum class 4 rating.
11. Colorfastness to Ozone: Comply with AATCC 129, minimum rating of 4 on the AATCC color transfer chart.
12. Delamination Strength: Minimum of 440 N/m (2.5 lb/inch) between secondary backing.
13.
Flammability and Critical Radiant Flux Requirements:
a.
Test Carpet in accordance with ASTM E 648.
b.
Class I: Not less than 0.45 watts per square centimeter.
c.
Class II: Not less than 0.22 watts per square centimeter.
d.
Carpet in corridors, exits and Medical Facilities: Class I.
14.
Density: Average Pile Yarn Density (APYD):
a.
Corridors, lobbies, entrances, common areas or multipurpose rooms, open offices, waiting areas and dining areas: Minimum APYD 6000.
b.
Other areas: Minimum APYD 4000.
B.
Color, Texture, and Pattern: As specified in Section 09 06 00, SCHEDULE FOR FINISHES.
2.2 ADHESIVE AND CONCRETE PRIMER
A.
Waterproof, resistant to cleaning solutions, steam and water, nonflammable, complies with air-quality standards as well as carpet manufacturer requirements. Adhesives flashpoint minimum 60 degrees C (140 degrees F), complies with ASTM D 3278.
B.
Seam Adhesives: Waterproof, non-flammable and non-staining as recommended by the carpet manufacturer.
C.
Release adhesives for modular tile carpet in accordance with written instructions by carpet manufacturer.
2.3 seaming tape
A.
Permanently resistant to carpet cleaning solutions, steam, and water.
B.
Recommended by carpet manufacturer.
2.4 EDGE STRIPS (MOLDING)
A.
Metal:
1.
Hammered surface aluminum, pinless, clamp down type designed for the carpet being installed.
2.
Floor flange not less than 38 mm (1-/2 inches) wide, face not less than 16 mm (5/8 inch) wide.
3.
Finish: Clear anodic coating unless specified otherwise in Section 09 06 00, SCHEDULE FOR FINISHES.
B.
Vinyl Edge Strip:
1.
Beveled floor flange minimum 50 mm (2 inches) wide.
2.
Beveled surface to finish flush with carpet for tight joint and other side to floor finish.
3.
Color as specified in Section 09 06 00, SCHEDULE FOR FINISHES.
2.5 leveling compound (for concrete floors)
A.
Provide Portland cement bases polymer modifier with latex or polyvinyl acetate resin manufactured specifically for resurfacing and leveling concrete floors. Products containing gypsum are not acceptable.
B.
Determine the type of underlayment selected for use by condition to be corrected.
PART 3 - EXECUTION
3.1 SURFACE PREPARATION
A.
Examine surfaces on which carpeting is to be installed.
B.
Clean floor of oil, waxy films, paint, dust and deleterious substances that prevent adhesion, leave floor dry and cured, free of residue from curing or cleaning agents.
C.
Correct conditions which will impair proper installation, including trowel marks, pits, dents, protrusions, cracks or joints.
D.
Fill cracks, joints depressions, and other irregularities in concrete with leveling compound.
1.
Do not use adhesive for filling or leveling purposes.
2.
Do not use leveling compound to correct imperfections which can be corrected by spot grinding.
3.
Trowel to smooth surface free of trowel marks, pits, dents, protrusions, cracks or joint lines.
E.
Test new concrete subfloor prior to adhesive application for moisture and surface alkalinity per CRI 104 Section 6.3.1 or per ASTM E1907.
3.2 CARPET installtion
A.
Do not install carpet until work of other trades including painting is complete and dry.
B.
Install in accordance with CRI 104 direct glue down installation.
1.
Relax carpet in accordance with Section 6.4.
2.
Comply with indoor air quality recommendations noted in Section 6.5.
3.
Maintain temperature in accordance with Section 15.3.
C.
Secure carpet to subfloor of spaces with adhesive applied as recommended by carpet manufacturer.
D.
Follow carpet manufacturer's recommendations for matching pattern and texture directions.
E.
Cut openings in carpet where required for installing equipment, pipes, outlets, and penetrations.
1.
Bind or seal cut edge of sheet carpet and replace flanges or plates.
2.
Use additional adhesive to secure carpets around pipes and other vertical projections.
F.
Carpet Modules:
1.
Install per CRI 104, Section 13, Adhesive Application.
2.
Lay carpet modules with pile in same direction unless specified other wise in Section 09 06 00, SCHEDULE FOR FINISHES.
3.
Install carpet modules so that cleaning methods and solutions do not cause dislocation of modules.
4.
Lay carpet modules uniformly to provide tight flush joints free from movement when subject to traffic.
3.3 EDGE STRIPS installation
A.
Install edge strips over exposed carpet edges adjacent to uncarpeted finish flooring.
B.
Anchor metal strips to floor with suitable fasteners. Apply adhesive to edge strips, insert carpet into lip and press it down over carpet.
C.
Anchor vinyl edge strip to floor with adhesive apply adhesive to edge strip and insert carpet into lip and press lip down over carpet.
3.4 PROTECTION AND CLEANING
A.
Remove waste, fasteners and other cuttings from carpet floors.
B.
Vacuum carpet and provide suitable protection. Do not use polyethylene film.
C.
Do not permit traffic on carpeted surfaces for at least 48 hours after installation. Protect the carpet in accordance with CRI 104.
D.
Do not move furniture or equipment on unprotected carpeted surfaces.
E.
Just before final acceptance of work, remove protection and vacuum carpet clean.
- - - E N D - - -
09 68 00 - 1
File details come from the government source that posted it. Updated .