The file's text, extracted by GovTribe without its formatting.
SECTION 01070
ABBREVIATIONS AND SYMBOLS
PART 1 - GENERAL
1.01 REQUIREMENTS INCLUDED
A. Reference to the following standards of any technical society, organization or body shall be construed to mean the latest standard, code or specification or tentative specification adopted and published at the date of advertisement for bids, even though reference has been made to an earlier standard. Such reference is hereby made a part of the Contract the same as if herein repeated in full and in the event of any conflict between any of these specifications, standard codes or tentative specifications and the Contract Documents, the most stringent shall govern.
| AASHTO |
| American Association of State Highway and Transportation Officials |
| ABPA |
| Acoustical and Board Products Association |
| ACI |
| American Concrete Institute |
| AFBMA |
| Anti-Friction Bearing Manufacturer's Association |
| AGA |
| American Gas Association |
| AGMA |
| American Gear Manufacturers Association |
| AIA |
| American Institute of Architects |
| AIEE |
| American Institute of Electrical Engineers |
| AIMA |
| Acoustical and Insulating Materials Association |
| AISC |
| American Institute of Steel Construction |
| AISI |
| American Iron and Steel Institute |
| AMCA |
| American Moving and Conditioning Association |
| ANSI |
| American National Standards Institute |
| API |
| American Petroleum Institute |
| APWA |
| American Public Works Association |
| AREA |
| American Railway Engineering Association |
| ASA |
| American Standards Association (now ANSI) |
| ASCE |
| American Society of Civil Engineers |
| ASHRAE |
| American Society of Heating, Refrigerating, and Air Conditioning Engineers |
| ASME |
| American Society of Mechanical Engineers |
| ASSCBC |
| American Standard Safety Code for Building Construction |
| ASTM |
| American Society for Testing and Materials |
| AWPA |
| American Wood Preservers Association |
| AWBP |
| American Wood Preservers Board |
| AWS |
| American Welding Society |
| AWWA |
| American Water Works Association |
| CRSI |
| Concrete Reinforcing Steel Institute |
| DOT Spec |
| Standard Specification for Road and Bridge Construction – |
| FDOT |
| Florida Department of Transportation |
| FAC |
| Florida Administrative Code |
| ICEA |
| Insulated Cable Engineers Association |
| IEEE (IEE) |
| Institute of Electrical and Electronic Engineers |
| IPCEA |
| Insulated Power Cable Engineers Association |
| NACE |
| National Association of Corrosion Engineers |
| NASSCO |
| National Association of Sewer Service Companies |
| NBFU |
| National Board of Fire Underwriters |
| NBS |
| National Bureau of Standards |
| NEC |
| National Electrical Code |
| NECA |
| National Electrical Contractor's Association |
| NEMA |
| National Electrical Manufacturers Association |
| NFPA |
| National Fire Protection Association |
| NPT |
| National Pipe Threads |
| NSF |
| National Science Foundation |
| NTRL |
| Nationally Recognized Testing Laboratory |
| OCU |
| Orange County Utilities |
| OSHA |
| U.S. Department of Labor, Occupational Safety and Health Administration |
| PCA |
| Portland Cement Association |
| PCI |
| Prestressed Concrete Institute |
| PS |
| United States Products Standards |
| SAE |
| Society of Automotive Engineers |
| SDI |
| Steel Decks Institute |
| SJI |
| Steel Joists Institute |
| SMACNA |
| Sheet Metal and Air Conditioning Contractors National Association |
| SSPC |
| Structural Steel Painting Council |
| UL |
| Underwriter's Laboratories, Inc. |
| USASI |
| United States of American Standards Institute (Now ANSI) |
B. UNITS OF MEASUREMENT
| DegC |
| degree(s) Centigrade |
| DegF |
| degree(s) Fahrenheit |
| LBF-IN |
| pound (force) inch |
| LF |
| linear foot, linear feet |
| MIN. min. |
| minute(s), minimum |
| SF |
| square foot, square feet |
C. TERMINOLOGY
| BCCMP |
| bituminous coated corrugated metal pipe |
| CCB |
| concrete block, masonry |
| CIP |
| cast iron pipe, cast in place |
| CL |
| center line, clearance |
| CMP |
| corrugated metal pipe |
| MH |
| manhole, metal hallide |
| TEMP |
| Temperature, temporary |
D. OTHER ACRONYMS AND GENERAL TERMINOLOGY
| SCADA |
| Supervisory Control and Data Acquisition |
END OF SECTION
THIS PAGE LEFT BLANK INTENTIONALLY
01070 - 1 of 6