0004 CFT Supplemental_Specification_939.01 SIGNED.pdf

PDF 140 KB Posted

Attached to
USDA Forest Service NORTH CAROLINA CATAWBA FALLS TRAIL IMPROVEMENTS 2023-Phase IC
Solicitation number
12445123R0034
Issued by

About this file

This federal contract opportunity solicitation requests proposals for trail improvement work on the Catawba Falls Trail located in the Pisgah National Forest in North Carolina. The scope of work includes constructing sections of elevated boardwalks and stairs, resurfacing over 5,300 linear feet of existing trail, modifying a retaining wall design to use dry stacked rock, and other tasks such as slide area repairs, turnaround creations, retaining wall construction, boardwalk construction, and elevated viewing platform construction. Proposals are due by 18 July 2023 at 1:00 PM Eastern Time and the contract will be awarded as a firm-fixed price to the best value offeror. A non-mandatory site visit will be held on 28 June 2023 and all questions must be submitted by 10 July 2023. The contract is valued between $5-10 million and is set aside for total small business. The federal agency is the USDA Forest Service.

View the file

Other files

File Type Posted
12445123R0034 Questions Asked As Of 07122023.doc DOC document
12445123R0034 Questions Asked As Of 07112023.doc DOC document
12445123R0034 Site Visit Registry 6.28.2023.pdf PDF
12445123R0034 Questions Asked As Of 07062023.doc DOC document
0003 CFT Supplemental Specification 911-912.pdf PDF
12445123R0034 Complete Package.pdf PDF
0012 CFT Survey Controls.pdf PDF
0016 12445123R0034 Construction Experience Questionaire Fillable.pdf PDF
0002 CFT Standard Trail Specifications.pdf PDF
0006 CFT Plan Set SIGNED.pdf PDF
0009 Catawba Falls Trail 6.15.2023 - Geotechnical Report Slide 3.pdf PDF
12445123R0034 Sched B_Terms and Conditions.pdf PDF
0005 CFT Supplemental_Specification_939.02 SIGNED.pdf PDF
0001 CFT Statement of Work_Catawba Falls Trail Phase 1C 6.12.2023.pdf PDF
0014 Davis-Bacon Act WD NC20230086.pdf PDF
12445123R0034 SF1442.pdf PDF
0008 Catawba Falls Trail 3.20.2023 - Phase 0 Slide 3 Gabion Wall Plan.pdf PDF
0010 CFT Plans Dry Stacked Rock Retaining Wall 935.20.pdf PDF
0017 12445123R0034 CONTACTOR REFERENCES FILLABLE.pdf PDF
0013 CFT Geotechnical Report SIGNED.pdf PDF
0011 CFT Load Calculations.pdf PDF
0007 CFT Plans Page 15 of 34 Revision.pdf PDF
0015 12445123R0034 Attachment A Buy American_Hazardous Materials Fillable.pdf PDF
Show all 23

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

939.01 – Construct Prefabricated Trail Tower

Description

939.01.01 This work consists of the fabrication, delivery and construction/anchorage of a galvanized prefabricated trail tower with staircase. Galvanization shall be in accordance with

AASHTO M 232.

Materials

939.01.02 A galvanized steel staircase shall be provided with a slip resistant stair tread and galvanized steel grid landings capable of supporting pedestrian live load per international building code and designed considering wind loading (lateral supports required). Galvanized steel railing shall also be provided along the stairs and landings and shall be 42” minimum above the tread and landings. Rail openings shall be small enough such that a 4-inch sphere cannot pass through them. Bolted connections shall be utilized where possible to avoid field welding. Where field welding is required, welds shall be smoothed and coated with zinc to prevent corrosion. The dimensions of the staircase are approximate, but it is the intention of this work to provide a staircase with tread rise/run as shown on the profile view of the tower (See Plan Sheet 18) with target elevations for the landings as indicated. The stair tread and landings are required to be 5’ wide. Steel tubing and metal grating shown on Sheet 18 are for conceptual purposes only and shall be design by a Professional Engineer. Shop drawings shall be submitted to the Project Engineer and approved before ordering from the fabricator. Final drawings for the Prefabricated Staircase shall be signed and sealed by a Professional Engineer licensed in North Carolina.

Construction

939.01.03 Construct the trail tower at the location SHOWN ON THE PLANS. The tower legs shall be anchored into the adjacent rock in the field and shall consist of a 16”x16”x1” base plate.

Locations at the bolted connections shall be prepared and leveled and the final footing design shall be approved, signed and sealed by a professional engineer. Connection details and footing requirements shall be considered incidental to this work item and included in this pay item for completing the work. While the plans show the trail continuing in the future, the top of the trail tower at completion of Phase 1B (shown as “exit”) shall be fully enclosed with the specified railing to prevent falls. The top of the staircase will serve as a termination point landing/view deck until Phase 1C is completed and at such time the “temporary” railing will be removed under the work performed in Phase 1C.

Measurement and Payment

939.01.04 Measurement of this pay item shall be made at the unit price LS for Prefabricated Trail Tower installed and approved and payment will be full compensation for the work prescribed in this section.

File details come from the government source that posted it. Updated .