Columbus Oil Turn-key Well Plug. Project Cass Cty

Closed State & local contract opportunity Posted

Solicitation number
DS 761 270000000004 2
State
Michigan
Responses due

Opportunity facts

NIGP code

Updated .

About this opportunity

Michigan's Department of Environment, Great Lakes, and Energy (EGLE) is soliciting bids for the turn-key plugging of 22 oil and gas wells in Cass County, Michigan under contract DS 270000000004, with bids due November 17, 2026. The work is performed under a Davis-Bacon wage determination, and bidders must price each well on a turn-key basis.

Contractors plug each well according to EGLE's instructions and attached procedures, remove partial surface piping and install blind flanges near master gate valves, and remove electrical infrastructure at well pads. The Hawkes & Adams 1-18 well sits at approximately 900 feet after a cast iron bridge plug was set in a well previously drilled to 2,998 feet. The remaining 21 wells run approximately 700 to 1,000 feet. Well fluids and materials must be containerized in steel tanks, and earthen pits are prohibited. Personal air monitors must be available for rig crew evaluation, though a third-party H2S safety trailer is not required because the wells present very low hydrogen sulfide levels. Site restoration includes filling, leveling, and seeding with standard grass mix, with pricing reflecting removal and disposal of up to 5 cubic yards of soil per well location unless the site is an agricultural field.

Bidders submit a per-well turn-key price and a grand total for all 22 wells. The State pays 100 percent of invoiced amounts upon verification of accuracy and completion of pay certifications, replacing the 20 percent holdback referenced in initial questions. No bid, performance, or payment bonds are required. Salvage and scrap proceeds belong to the State of Michigan, and the contractor arranges transportation and loading of purchased items off-site. Davis-Bacon wage rates apply to truck drivers performing labor-type tasks but not to de minimis drop-off and pick-up activities. Certified payrolls are submitted weekly on form WH-347 via email. The wage determination, issued May 28, 2026, covers 18 job classifications with hourly rates from $20.00 to $55.00 and fringe benefits from $12.00 to $69.00 per hour, and it expires November 28, 2026.

Winter work is permitted, but seasonal weight restrictions temporarily halt plugging, and that time is excluded from the contractor's timeline. Seeding may occur in the next planting season after plugging is completed. Attachments include a revised project description, the Schedule B pricing matrix, a pre-bid meeting notice, and the Q&A document.

Files

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for State & Local Contractors