UFDD-132 and UFDD-133
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- N4523A23R1054
- Agency
- Naval Supply Systems Command Department of the Navy, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 336611 Ship Building and Repairing
Notice details come from SAM.gov. Updated .
About this opportunity
This solicitation seeks maintenance, repair, and preservation services for two Deep Draft Utility Floats owned by the Department of the Navy, designated UFDD-132 and UFDD-133. The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility intends to award a firm-fixed-price contract to accomplish cleaning, blasting, coating and preserving the underwater hulls; installing new zinc anodes and fenders; inspecting and repairing tanks and voids; and applying non-skid deck coating. The contractor's facility must be located in the Puget Sound, Washington region and be able to accommodate both vessels simultaneously. The period of performance is from April 3, 2023 to June 30, 2023. Proposals are due by January 19, 2023.
This is a 100% small business set-aside solicited under NAICS code 336611, Ship Building and Repairing, with a size standard of 1,250 employees. The solicitation was issued by the Department of the Navy Naval Supply Systems Command. Offerors must have the capability to dock and service the two steel floats, which each measure 56 feet in length, 19 feet in width, have a 17-foot 8-inch draft, and weigh approximately 39 tons. The expected place of performance is the contractor's facility located in the Puget Sound region of Washington state.
Notice text
3 versions
Update #3 · Latest ·
The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair and preservation of two (2) Deep Draft Utility Floats (UFDD-132 and UFDD-133). The UFDD-132 and UFDD-133 are made of steel and are 46 years old and they both are 56 FT in length, 19 FT in width, 17 FT- 8 IN draft and 39 L tons light load. The contractors facility must possess the capability of accommodating two (2) Deep Draft Utility Floats (UFDD-132 and UFDD-133) with the dimensions as stated above. To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officers Representative (COR), to deliver each vessel to the Contractors facility. Dock, wash, and clean the exterior surfaces of each vessel. Remove each rubber fender from each floats undercarriage structure. Sweep blast clean each rubber fender, temporarily store, and install each rubber fender to its parent location upon full completion of preservation curing operations of the underwater hull and undercarriage structure and install new galvanized fasteners. Install new CRES (corrosion resistant steel) 316L test data label plates after accomplishment of the overload test(s). Remove existing, install new zinc anodes, and install new associated CRES 304 fasteners. Accomplish an electrical resistance test of each new zinc anode. Blast and preserve the underwater body, hull, freeboard, and undercarriage structure surfaces of each vessel and install new a 12-year service life commercial marine epoxy coating system. Accomplish a visual and ultrasonic test (UT) inspection of the underwater body, hull, freeboard, and undercarriage structure surfaces of each vessel after blasting and application of the primer coat. Open, pump, clean, ventilate, gas free, and maintain dry each tank/void on each vessel. Accomplish a visual inspection for preservation coating condition, structural integrity, deterioration, and distortion of each tank/void. Accomplish an air test of each tank/void on each vessel. Accomplish various repairs in each tank/void as specified in the SOW. Remove existing and install new non-skid to the Main Deck surfaces of each vessel. Accomplish a visual and UT inspection of the Main Deck plating surfaces after blasting and application of the first primer coat. Undock each vessel. Arrange and coordinate the delivery of each vessel back to the Government with the Contracting Officer via the COR. The expected Period of Performance is scheduled to be 3 April 2023 to 30 June 2023. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,250 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov.
Update #2 ·
The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair and preservation of two (2) Deep Draft Utility Floats (UFDD-132 and UFDD-133). The UFDD-132 and UFDD-133 are made of steel and are 46 years old and they both are 56 FT in length, 19 FT in width, 17 FT- 8 IN draft and 39 L tons light load. The contractors facility must possess the capability of accommodating two (2) Deep Draft Utility Floats (UFDD-132 and UFDD-133) with the dimensions as stated above. To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officers Representative (COR), to deliver each vessel to the Contractors facility. Dock, wash, and clean the exterior surfaces of each vessel. Remove each rubber fender from each floats undercarriage structure. Sweep blast clean each rubber fender, temporarily store, and install each rubber fender to its parent location upon full completion of preservation curing operations of the underwater hull and undercarriage structure and install new galvanized fasteners. Install new CRES (corrosion resistant steel) 316L test data label plates after accomplishment of the overload test(s). Remove existing, install new zinc anodes, and install new associated CRES 304 fasteners. Accomplish an electrical resistance test of each new zinc anode. Blast and preserve the underwater body, hull, freeboard, and undercarriage structure surfaces of each vessel and install new a 12-year service life commercial marine epoxy coating system. Accomplish a visual and ultrasonic test (UT) inspection of the underwater body, hull, freeboard, and undercarriage structure surfaces of each vessel after blasting and application of the primer coat. Open, pump, clean, ventilate, gas free, and maintain dry each tank/void on each vessel. Accomplish a visual inspection for preservation coating condition, structural integrity, deterioration, and distortion of each tank/void. Accomplish an air test of each tank/void on each vessel. Accomplish various repairs in each tank/void as specified in the SOW. Remove existing and install new non-skid to the Main Deck surfaces of each vessel. Accomplish a visual and UT inspection of the Main Deck plating surfaces after blasting and application of the first primer coat. Undock each vessel. Arrange and coordinate the delivery of each vessel back to the Government with the Contracting Officer via the COR. The expected Period of Performance is scheduled to be 3 April 2023 to 30 June 2023. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,250 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov.
Update #1 ·
The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair and preservation of two (2) Deep Draft Utility Floats (UFDD-132 and UFDD-133).
The UFDD-132 and UFDD-133 are made of steel and are 46 years old and they both are 56 FT in length, 19 FT in width, 17 FT- 8 IN draft and 39 L tons light load.
The contractors facility must possess the capability of accommodating two (2) Deep Draft Utility Floats (UFDD-132 and UFDD-133) with the dimensions as stated above. To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA.
Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officers Representative (COR), to deliver each vessel to the Contractors facility. Dock, wash, and clean the exterior surfaces of each vessel. Remove each rubber fender from each floats undercarriage structure. Sweep blast clean each rubber fender, temporarily store, and install each rubber fender to its parent location upon full completion of preservation curing operations of the underwater hull and undercarriage structure and install new galvanized fasteners. Install new CRES (corrosion resistant steel) 316L test data label plates after accomplishment of the overload test(s). Remove existing, install new zinc anodes, and install new associated CRES 304 fasteners. Accomplish an electrical resistance test of each new zinc anode. Blast and preserve the underwater body, hull, freeboard, and undercarriage structure surfaces of each vessel and install new a 12-year service life commercial marine epoxy coating system. Accomplish a visual and ultrasonic test (UT) inspection of the underwater body, hull, freeboard, and undercarriage structure surfaces of each vessel after blasting and application of the primer coat. Open, pump, clean, ventilate, gas free, and maintain dry each tank/void on each vessel. Accomplish a visual inspection for preservation coating condition, structural integrity, deterioration, and distortion of each tank/void. Accomplish an air test of each tank/void on each vessel. Accomplish various repairs in each tank/void as specified in the SOW. Remove existing and install new non-skid to the Main Deck surfaces of each vessel. Accomplish a visual and UT inspection of the Main Deck plating surfaces after blasting and application of the first primer coat. Undock each vessel. Arrange and coordinate the delivery of each vessel back to the Government with the Contracting Officer via the COR.
The expected Period of Performance is scheduled to be 3 April 2023 to 30 June 2023.
This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,250 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. *Visit 'https://piee.eb.mil/sol/xhtml/unauth/search/oppMgmtLink.xhtml?solNo=N4523A23R1054' to obtain more details.*
Attachments
Show all 11
Notice history
| Notice | Type | Posted |
|---|---|---|
| UFDD-132 and UFDD-133 | Award Notice | |
| UFDD-132 and UFDD-133 | Solicitation | |
| Preservation, Maintenance and Repair of UFDD-132 & UFDD-133 | Pre-Solicitation | |
| Preservation, Maintenance and Repair of UFDD-132 & UFDD-133 | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity