Maintenance and Repair of Interior and Exterior Overhear and hanging doors

Closed Pre-Solicitation Posted

This opportunity was awarded. See the award notice from .

Solicitation number
N4008519R9038
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

PSC
Not on record

Notice details come from SAM.gov. Updated .

About this opportunity

The Naval Facilities Engineering Command Mid-Atlantic seeks proposals for a requirements contract to provide maintenance, repair, alteration, demolition and minor construction services for interior and exterior overhead and hanging doors at various naval installations in Virginia. The work includes preventative maintenance and repair of doors, overhead metal doors, sliding doors, bi-fold doors, hangar doors and fire doors. The contract will utilize lowest price technically acceptable source selection evaluating technical approach, corporate experience, safety, and past performance. The solicitation is expected to be released on March 28, 2019 with proposals due at least 30 days later.

The procurement is set aside as 100% small business with a NAICS code of 238290 and size standard of $15 million. The estimated annual contract value is over $2 million to provide services for a one year base period and four one year option periods not exceeding five years total. Offerors must demonstrate experience on similar projects valued over $2 million annually involving maintenance of interior and exterior doors and other door types. The contract will be awarded as a NAVFAC Mid-Atlantic electronic facilities support contract requiring acceptance of purchase cards and FedMall encrypted software for online ordering.

Notice text

The Officer in Charge requires all labor, management, supervision, tools, material and equipment required to provide Facility Investment Services for Preventive Maintenance, Repair, and Alteration, Demolition and Minor Construction of Interior and Exterior Doors for NAVFAC Mid-Atlantic geographical areas consisting at: Norfolk Naval Shipyard and annexes, Portsmouth; Portsmouth Naval Medical Center, Portsmouth; Little Creek Site including - Naval Amphibious Base Little Creek, Norfolk; Sewells Point Site including â€" Naval Station and Chambers Field, Norfolk; Oceana Site including â€" Naval Air Station, Fleet Training Center Damn Neck and, Fentress Airfield, Virginia Beach; Peninsula Site including â€" Naval Weapons Station, Yorktown and Cheatham Annex, Williamsburg, and various locations within a 50-mile radius of the above bases.
The work includes but is not limited to Preventive Maintenance of Interior and Exterior Doors, Overhead Metal Doors, Sliding Doors, Bi-Fold Doors, Sliding Hangar Bay Doors and Sliding Fire Doors at NAVFAC Mid-Atlantic geographical areas previously stated.
The work identified is to be provided by means of a combination Firm-Fixed Price/Indefinite Quantity type of contract. Source Selection procedures will be used to select the proposal that provides the lowest price and is technically acceptable to the Government. Offerors will be evaluated using the Lowest Priced Technically Acceptable (LPTA) Method in order to permit efficient competition, the Navy will utilize the following methodology: Proposals will initially be screened for price and placed in order of price (lowest price to highest price). The Navy will then evaluate the technical factors of the lowest priced proposal. The Navy will make award to the lowest priced technically acceptable proposal.
However, if the lowest priced proposal is not found to be technically acceptable, the Navy at its sole discretion, reserves the right to increase the number of proposals it will review, until the Government identifies a technical acceptable proposal. Accordingly, under this methodology, the technical factors of some proposals may not be evaluated by the Navy. If discussions are deemed necessary by the Contracting Officer, all proposals will be evaluated (both non-price and price) for the purpose of establishing a competitive range.
Proposers are advised that the Government intends to evaluate proposals and award without discussions or any contact concerning the proposals received. Therefore, proposals should be submitted initially on the most FAVORABLE terms.
Proposers should not assume that they will be contacted or afforded an opportunity to qualify, discuss or revise their proposals.
The solicitation and resulting contract award will be a performance-based service acquisition made to the responsible offeror whose proposal, conforming to the Request for Proposals (RFP), will be advantageous to the Government price and other evaluation factors considered. The offeror’s proposal shall contain a response to each of the evaluation factors and shall be in the form prescribed by the solicitation. The solicitation requires the evaluation of price and the following non-price factors: Factor 1 â€" Technical Approach/Management, Factor 2 â€" Corporate Experience, Factor 3 â€" Safety and Factor 4 â€" Past Performance.
NOTE: Offerors MUST be evaluated as technically ACCEPTABLE under factors 1, 2, 3 and 4 in order to be considered technically acceptable overall.
Factor 2 Corporate Experience and Factor 4 Past Performance: The Offeror shall submit projects that are similar in size, scope and complexity to the solicitation.
Size: A maintenance service contract with a yearly value of at least $2M or greater for recurring services.
Scope: Demonstrate the ability to provide maintenance, repair, alteration, demolition and minor construction of Interior and Exterior Doors, Overhead Metal Doors, Sliding Doors, Bi-Fold Doors, Sliding Hangar Bay Doors and Sliding Fire Doors, or other services, as defined by the RFP.
Demonstrate the ability to perform various miscellaneous services to include, but not limited to Routine and Emergency Service Orders, and other services that may be typical of an Interior and Exterior Door maintenance contract.
Complexity: Demonstrate the ability to respond simultaneously to service calls and maintenance requirements for repair, alteration, demolition and minor construction at various locations and buildings throughout the installations and supporting annexes. Demonstrate the ability to manage competing priorities in order to support customer demands.
Offers shall be submitted for the performance of work for a period of one year. However, the initial term of the contract may be for a period of less than one year.
The Government has the option to extend the term of the contract services for additional periods of one to twelve months. The contract will be for a base period with four (4) one-year option periods, which, cumulatively, will not exceed sixty (60) months.
The proposed procurement will be issued as a NAVFAC Mid-Atlantic Electronic Facilities Support Contract with online ordering capability using FedMall for the Indefinite Quantity Exhibit Line Item Numbers (ELINs). Acceptance of Government Purchase Credit Cards is required along with the purchase of FedMall Encrypted software. The North American Classification System (NAICS) is 238290, the size standard is $15M.
The proposed procurement listed herein is set-aside for small business concerns only.
The RFP will be made available in electronic format only (Adobe Acrobat (.pdf)) and will be posted on the Navy Electronic Commence Online (NECO) website on or about
28 March 2019. The estimated proposal due date shall be at least 30 days after the RFP is posted. (Contractors - Technical inquiries must be submitted in writing to Susan Roberts (susan.roberts2@navy.mil) 10 days prior to the RFP due date.
The site address is https://www.neco.navy.mil. Notifications of any updates or amendments to the solicitation will be posted on the website only. Contractors are encouraged to register on the NAVFAC NECO website. Only registered contractors will be notified by e-mail when amendments to the solicitation are issued.
IT IS THE SOLE RESPONISBILITY OF THE OFFEROR TO CONTINUALLY VIEW THE WEBSITE FOR CHANGES. All prospective contractors are required to register in the System for Award Management (SAM) database. Failure to register in the SAM database will make an offeror ineligible for award. Offerors and contractors may obtain information on registration and annual confirmation requirements via the Internet at https://www.sam.gov/portal/SAM/ .
.

Files

File Type Posted
J-0200000-15_ELINs.xls XLS spreadsheet
RFP_N4008519R9038_OVERHEAD_DOORS.pdf PDF
Section_J-0200000_-_Additional_Attachments.zip ZIP file
N4008519R9038_Presolicitation_Notice_N4008519R9038.docx DOCX document

Notice history

Notice Type Posted
Regional Repair, Maintenance & Alteration of Doors Award Award Notice
This notice Latest pre-solicitation Pre-Solicitation
Regional Maintenance and Repair of Doors Original Pre-Solicitation

Similar open opportunities

Opportunity Agency Set-aside Responses due
Door Repair IDPO; Defense Supply Center Richmond(DSCR) Richmond, Virginia 23237, United States · NAICS 238990 Defense Logistics Agency Total Small Business
Door, access, aircraf, in repair/modification of NAICS 336413 Naval Supply Systems Command No set-aside
Door, access, aircraf, in repair/modification of NAICS 336413 Naval Supply Systems Command No set-aside
Door, aircraft NAICS 336413 Naval Supply Systems Command No set-aside
Door, aircraft NAICS 336413 Naval Supply Systems Command No set-aside

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors