Lease of Office Space within Region 3. Request for Lease Proposals (RLP) #25REG03 - Office Space

This advertisement is hereby incorporated into the RLP 25REG03 by way of reference as an RLP attachment.

U.S. GOVERNMENT seeks to lease the following office space through the Automated Advanced Acquisition Program (AAAP):

City: La Plata

State: Maryland

Delineated Area: 

North: Starting at the intersection of Routes 229 and 227, go east on Marshall Corner Rd to Route 301, northeast on Route 301 to Route 5, southeast on Route 5 to Poplar Hill Rd, east on Poplar Hill Rd to Dr Samuel mudd Rd, south on Dr Samuel Mudd Rd to Woodville Rd, southeast on Woodville Rd to Route 381

East: Go south on Route 381 to Route 231, east on Route 231 to Route 5, south on Route 5 to
Route 236, southwest on Route 236 to Route 234
South: Go west on Route 234 to Route 301.
West: Go north on Route 301 to Chapel Point Rd, north on Chapel Point Rd to Causeway Rd, west
on Causeway Rd to Port Tobacco Rd Route 6, west on Port Tobacco Rd to Rose Hill Rd, north on
Rose Hill Rd to Marshall Corner Rd, back to the start at the intersection of Routes 229 and 227

Minimum ABOA Square Feet: 4,690

Maximum ABOA Square Feet: 4,925

Space Type: Office

Lease Term: Ten (10) years, Five (5) years firm, Five (5) year renewal option

AGENCY UNIQUE REQUIREMENTS

• Three (3) reserved surface parking spaces
• Offered space must have outgoing mail service located within the building
• Offered space must be contiguous on one (1) floor

Agency Tenant Improvement Allowance:

All locations offered: $55.42 per ABOA SF

Estimated Overage Amount: $421,098.22

Building Specific Amortized Capital (BSAC):

All locations offered: $12.00 per ABOA SF

Offerors are encouraged to submit rates for all terms available in the AAAP for consideration against future GSA requirements.

Amortization Term: 5 years for both Tenant Improvements and Building Specific Amortized Capital.
 

IMPORTANT NOTES
Check the attachments and links section of this notice for possible, additional project-specific
requirements or modifications to the RLP.
Offerors are advised to familiarize themselves with the telecommunications prohibitions outlined under
Section 889 of the FY19 National Defense Authorization Act (NDAA), as implemented by Federal
Acquisition Regulation (FAR). For more information, visit: https://acquisition.gov/FAR-Case-2019-
009/889_Part_B
Offerors are advised that all Shell work associated with delivering the Tenant Improvements are at the
Lessor’s cost.  Please refer to Section 3 (Construction Standards and Shell Components) and specifically
to Paragraph 3.07 (Building Shell Requirements) of the AAAP RLP Attachment #2 titled "Lease Contract"
(GSA Form L100_AAAP ) for more detail.  Tenant Improvement Components are detailed under Section
5 of the AAAP RLP Attachment #2 titled "Lease Contract" (GSA Form L100_AAAP) .   
It is highly recommended that offerors start the SAM registration process directly following the offer
submission. Refer to RLP Clause 3.06.
(If applicable) The Government intends to award a Lease to an Offeror of a Building that is in compliance
with Seismic Standards. Section 2.03 of the Request for Lease Proposals (RLP) outlines compliance
activities required for all leases in moderate or high seismic zones. To determine if your property lies in a
moderate or high zone, please reference the map and documents on our website.

HOW TO OFFER
The Automated Advanced Acquisition Program (AAAP), located at https://leasing.gsa.gov/, will enable
interested parties to offer space for lease to the Federal Government in response to the FY25 AAAP RLP.
In addition, the Government will use its AAAP to satisfy the above space requirement.
Offerors must go to the AAAP website, select the “Register to Offer Space” link and follow the instructions
to register. Instructional guides and video tutorials are offered on the AAAP homepage and in the “HELP”
tab on the AAAP website. Once registered, interested parties may enter offers during any “Open Period”.
For technical assistance with AAAP, email leasing@gsa.gov.

The Open Period is the 1st through the 7th of each month, ending at 7:30 p.m. (ET) unless otherwise
stated by the Government and unless the 7th falls on a weekend or Federal Holiday. If the 7th falls on a
weekend or Federal Holiday, the Open Period will end at 7:30 PM (ET) on the next business day. Refer to
AAAP RLP paragraph 3.02 for more details on the offer submission process. The Government reserves
the right to allow for multiple Open Periods prior to selecting an offer for award to meet this specific space
requirement. Offers cannot be submitted during the Closed Period and will not be considered for projects
executed during that time period.
Lease award will be made to the lowest price, technically acceptable offer, without negotiations, based
upon the requirements in this advertisement and in the RLP requirements package found on the AAAP
website. During an Open Period, offerors will be permitted to submit new offers or modify existing offers.
Offerors can draft an offer at any time; however, you can only submit an offer during the Open Period.
The offered space must comply with the requirements in this advertisement and the RLP and must meet
Federal Government, State, and Local jurisdiction requirements, including requirements for fire and life
safety, security, accessibility, seismic, energy, and sustainability standards in accordance with the terms
of the Lease. The Lease and all documents that constitute the Lease package can be found at
https://leasing.gsa.gov/leasing/s/AAAP-PortalHome.
If you have previously submitted an offer in FY 2024, the AAAP application has a copy feature which will
allow existing offers to be copied over to the FY 2025 RLP in order to avoid having to re-enter all of the
data manually. Please be sure to review FY25 AAAP RLP Package and each page within the AAAP
Application prior to submitting your offer as some of the questions have changed. You must re-enter your
space and rates on the ‘Space and Rates’ tab in the AAAP. Your previous offered space will not be
copied.