High Sensitivity Tunneling Magnetoresistive Magnetometers
Open Pre-Solicitation Posted
- Solicitation number
- DON27BZ02-NV015
- Agency
-
Office of Naval Research
Secretary of the Navy, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- Points of contact
-
- Amanda Bobe amanda.l.bobe.civ@us.navy.mil
- Noah Schulz noah.c.schulz.civ@us.navy.mil
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
About this opportunity
The Office of Naval Research, part of the Department of the Navy, is preparing to procure Phase I SBIR research on high-sensitivity tunneling magnetoresistive (TMR) magnetometers under topic DON27BZ02-NV015, with a due date of January 6, 2027. The set-aside is Total Small Business. The export-controlled work is ITAR-controlled, and the required CMMC level is Level 2 (Self).
Phase I requires a concept for single-axis TMR sensors that meet these design requirements: size less than 10 mm x 10 mm per axis, power less than 100 mW per axis, sensitivity less than 50 pT/rt(Hz) at 1 Hz, frequency range DC to 500 kHz, dynamic range -100 uT to 100 uT, nonlinearity less than 0.1 percent over dynamic range, and standardized per-unit electrical packaging. Deliverables include a per-sensor voltage-to-field calibration for stakeholder confirmation and an analysis of the potential of the design. The topic targets one-way attack vehicles, expeditionary warfare, mine warfare, and swarming systems. It is coded under NAICS 541715 and PSC AC12, with Microelectronics and Quantum Science as focus areas.
Notice text
DoD SBIR topic DON27BZ02-NV015
Component: NAVY
Command: ONR
Phase: SBIR Program Phase I Action
Technology Areas: None
Focus Areas: Microelectronics; Quantum Science
Keywords: Magnetometery; Tunneling Magnetoresistance; Magnetic Anomaly Detection
ITAR: Yes
CMMC: Level 2 (Self)
Objective:
Modernize United States capabilities to produce ultra-low size, weight, power, and cost (SWAP-C) tunneling magnetoresistive magnetometers with industry leading sensitivities.
Description:
Many Navy systems utilize magnetometer technologies for the remote detection, localization, and classification of ferrous objects. Decades of research into different technologies including optically pumped magnetometers have provided highly sensitive technologies which meet most Navy sensitivity needs. However, higher sensitivity magnetometers also possess increased SWAP-C, which limits their applicability in many Navy applications.
Therefore, there is a direct need for highly sensitive magnetometers that are also compact, low cost, and low power to support a broader range of Navy mission requirements including one-way attack vehicles, expeditionary warfare, mine warfare, and swarming systems. Over the past 30 years, an adjacent technology known as tunneling magnetoresistance (TMR) has had drastic improvements in system sensitivities, unlocking a potential new regime of magnetometer technologies that exhibit ultra-low SWAP-C while maintaining Navy relevant sensitivities.
Design Requirements:
-Size: less than 10 mm x 10 mm per axis
-Power: less than 100 mW per axis
-Sensitivity: less than 50 pT/rt(Hz) @ 1 Hz
-Frequency Range: DC-500KHz
-Dynamic Range: -100 uT to 100 uT
-Nonlinearity over dynamic range: less than 0.1 %
-Standardized per unit electrical packaging
Phase I:
Produce a concept for single-axis TMR sensors that possess a design that satisfies the above criteria and also include a per sensor voltage-to-field calibration for confirmation by stakeholders. Provide an analysis or discussion of the potential tradeoffs in the Phase I report if the design concept cannot meet the design objectives. (Note: Justification for the prior should include comparative analysis of COTS capabilities, U.S. and International.)
Phase II:
Fabricate 6 or 9 prototype systems for evaluation and testing in a vector configuration including voltage-to-field calibration for each sensor. Demonstrate that the prototypes achieve or show potential for meeting the design requirements and intended use applications. Conduct testing in conjunction with Navy personnel. Address both cost effectiveness and manufacturability feasibility as part of the prototype test and evaluation. Consult the appropriate acquisition program office for any additional evaluation metrics needed for Phase III. Perform potential commercialization cost analysis to estimate at production cost per unit and prepare a Phase III commercialization/transition plan.
Phase III:
Apply the knowledge gained in Phase II to build an advanced vector TMR prototype that meets appropriate technology readiness level (TRL) metrics set by the acquisition program office. Support the Navy for test and validation of the system for certified Navy use. Develop manufacturing plans to facilitate transition to a UUV program of record.
Explore the potential to transfer these TMR sensors for potential commercial use in magnetic surveying and UXO detection.
Files
| File | Type | Posted |
|---|---|---|
| DON27BZ02-NV015.pdf | ||
| NAVY_SBIR_27BZ_PH I_R2.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Expeditionary Water Quality Sensors | Office of Naval Research | Total Small Business | |
| Quantum Sensing Analyzer | Air Force Materiel Command | Total Small Business | |
| Distributed Multispectral Event-Driven Integrated Sensing and Communications | Department of the Navy | Total Small Business | |
| Improved Ionosphere D-region Specification for High Frequency Propagation | Office of Naval Research | Total Small Business | |
| SI-Enabled “Just-in-time” Knowledge Delivery for Naval Maintainers | Office of Naval Research | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity