Quantum Sensing Analyzer

Open Pre-Solicitation Posted

Solicitation number
DAF27BZ02-NV014
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

NAICS code
541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
PSC
AC12 National Defense R&D Services; Department Of Defense - Military; Applied Research
Points of contact
More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

About this opportunity

Air Force Materiel Command is preparing to solicit Phase I SBIR proposals under DoD topic DAF27BZ02-NV014, "Quantum Sensing Analyzer," with responses due January 6, 2027. The procurement is set aside for Total Small Business. The topic seeks to investigate and validate the feasibility of a quantum-based sensing technology that uses Rydberg atomic sensors as an ultra-wideband universal measurement standard for electromagnetic systems, with the stated aim of enhancing radar, electronic warfare, and antenna characterization. The source cites sensitivity and accuracy across DC to 1 THz, with potential scalability to broader ranges, and names the Benefield Anechoic Facility (BAF) as a primary beneficiary for advanced electromagnetic system testing. Keywords include SI-traceable standards, field strength monitoring, chamber characterization, and anechoic testing. The topic is tagged ITAR: No and requires CMMC Level 2 (Self). Technology areas are Electronics, Human Systems, Information Systems, and Sensors. Focus areas are Mission Readiness & Disaster Preparedness, Quantum Science, and Sustainment & Logistics. The notice is coded NAICS 541715 and PSC AC12, and was posted November 4, 2026.

Notice text

DoD SBIR topic DAF27BZ02-NV014

Component: USAF

Command: AFMC

Phase: SBIR Program Phase I Action

Technology Areas: Electronics; Human Systems; Information Systems; Sensors

Focus Areas: Mission Readiness & Disaster Preparedness; Quantum Science; Sustainment & Logistics

Keywords: quantum sensing; Rydberg atomic sensors; electromagnetic measurements; SI-traceable standards; radar systems; electronic warfare; communication systems; antenna evaluation; field strength monitoring; chamber characterization; anechoic testing.

ITAR: No

CMMC: Level 2 (Self)

Objective:

Investigate and validate the feasibility of developing a novel quantum-based sensing technology utilizing Rydberg atomic sensors as an ultra-wideband universal measurement standard for electromagnetic systems. Demonstrate the potential of these sensors in a calibrated and highly sensitive universal measurement standard to enhance radar, electronic warfare, and antenna characterization.

Description:

The “Quantum Sensing Analyzer” project aims to address critical limitations in existing electromagnetic measurement technologies by developing a novel quantum-based sensing capability utilizing Rydberg atomic sensors. These sensors, leveraging quantum properties, exhibit extraordinary sensitivity and accuracy over a widespread frequency spectrum ranging from DC to 1 THz, with potential scalability to even broader ranges. This initiative is designed to modernize and standardize test and evaluation processes within the Department of Defense (DoD), particularly benefiting the Benefield Anechoic Facility (BAF) and its mission to support advanced electromagnetic system testing.

Problem Statement and Opportunity:

Current electromagnetic measurement techniques rely on diverse and complex instruments, which introduce inefficiencies, inconsistencies, and increased costs for the acquisition, testing, and integration of modern radar systems, electronic warfare platforms, communication systems, and antennas. These existing systems also face challenges in maintaining accuracy and repeatability, particularly when evaluating performance across a wide range of radio frequencies or within controlled environments like anechoic chambers.

The introduction of Rydberg sensor technology represents a disruptive opportunity to establish a universal, high-precision, SI-traceable standard for electromagnetic measurements. By adopting a single, compact, and adaptable sensor for diverse measurement tasks—including spectrum analysis, field strength monitoring, and chamber characterization—this capability promises to significantly reduce infrastructure requirements, simplify operational workflows, and enhance confidence in test data accuracy.

Project Objectives:

● Develop and validate a proof-of-concept Rydberg-based quantum sensing system capable of performing highly accurate and repeatable electromagnetic measurements across 1.5 MHz to 40 GHz.

● Demonstrate the ability of the sensor to serve as a universal measurement standard for radar, electronic warfare, communication systems, and antenna evaluation.

● Establish enhanced chamber characterization capabilities, including electromagnetic leakage detection, direction finding, near-field measurement, reflection mitigation, and quiet zone mapping, to improve the testing environment quality.

● Progress the technology readiness level (TRL) from TRL 2 at project initiation to TRL 6 by the conclusion of Phase II.

Required Efforts and Phase Activities:

Phase I:

● Perform a comprehensive feasibility study to assess the applicability of Rydberg atomic sensors as a universal electromagnetic measurement standard.

● Evaluate the sensors’ technical attributes, including sensitivity (targeting sub-microvolt/meter thresholds), dynamic range, and bandwidth.

● Identify potential integration challenges with existing test facilities and systems, particularly those used in the BAF.

● Deliverables: Feasibility study report detailing technical analyses, identified challenges, and potential solutions; preliminary system design for a prototype quantum sensing analyzer.

Phase II:

● Develop, fabricate, and demonstrate a functional prototype of the Rydberg-based quantum sensing system, incorporating key findings from Phase I.

● Conduct extensive testing and validation of the prototype in operationally relevant environments, including the BAF, with emphasis on precision, SI-traceability, and repeatability of electromagnetic measurements.

● Integrate the system into existing DoD testing workflows, showcasing improvements in efficiency, reduced equipment requirements, and testing performance.

● Deliverables: Fully operational prototype, detailed test and evaluation report, system integration plan, and transition strategy for scaling and deployment within the DoD.

Desired Outcome:

The successful development of a Quantum Sensing Analyzer will revolutionize the DoD’s electromagnetic measurement and testing capabilities by delivering a single, universal, quantum-enabled sensing standard. This solution will eliminate the need for multiple specialized instruments, streamline developmental and operational testing, and significantly enhance test accuracy and repeatability. Furthermore, the technology will address critical modernization priorities, such as advancing quantum science and enabling operationally focused Advanced Battle Management Systems (ABMS). This effort aligns with the Air Force’s strategic goals to improve mission readiness, accelerate technology deployment to the warfighter, and invest in cutting-edge testing capabilities that sustain innovation and technical superiority in defense systems.

Phase I:

Phase I will assess the feasibility of Rydberg sensors for precise electromagnetic measurements (1.5 MHz–40 GHz). Goals include evaluating sensitivity, bandwidth, and range while addressing DoD test needs. Deliverables: technical feasibility analysis, preliminary design, and simulated performance data to validate the sensors’ potential as a scalable, SI-traceable measurement standard for advanced defense applications.

Phase II:

Phase II focuses on developing, integrating, and testing a Rydberg-based quantum sensing prototype for 1.5 MHz–40 GHz electromagnetic measurement. Deliverables include a tested SI-traceable system demonstrating dynamic range, ultra-wideband operation, noise-level performance, operational integration, and resilience to interference. Success is defined by achieving TRL 6, validating accuracy, scalability, and compatibility with DoD testing environments such as BAF, and enabling future operational deployment.

Phase III:

Phase III will advance the TRL 6 prototype Quantum Sensing Analyzer to TRL 8+ with non-SBIR funding, integrating it for operational assessments at BAF and other DoD labs. The system will support electromagnetic testing (1.5 MHz–40 GHz) for radar, EW, and communication systems. Commercial uses include electromagnetic compliance testing and telecommunications. Transition involves DAF partners, certifications, training, and infrastructure development for deployment.

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors