DON27BZ02-NV015.pdf
PDF 53 KB Posted
- Solicitation number
- DON27BZ02-NV015
About this file
This is a Department of Navy presolicitation document for contract topic DON27BZ02-NV015 addressing the development of high sensitivity tunneling magnetoresistive (TMR) magnetometers. The objective is to modernize U.S. capabilities to produce ultra-low size, weight, power, and cost (SWAP-C) TMR magnetometers with industry-leading sensitivities for Navy applications including one-way attack vehicles, expeditionary warfare, mine warfare, and swarming systems.
The technical requirements specify single-axis TMR sensors with the following design criteria: size less than 10 mm x 10 mm per axis, power consumption below 100 mW per axis, sensitivity less than 50 pT/√Hz at 1 Hz, frequency range DC to 500 kHz, dynamic range from -100 µT to 100 µT, nonlinearity less than 0.1 percent, and standardized per-unit electrical packaging. Phase I requires development of a single-axis TMR sensor concept with per-sensor voltage-to-field calibration and comparative analysis of commercial off-the-shelf capabilities including international options if the design cannot meet all objectives. Phase II requires fabrication of 6 or 9 prototype systems in vector configuration with voltage-to-field calibration, testing with Navy personnel, cost effectiveness and manufacturability assessments, and a Phase III commercialization plan. Phase III focuses on building an advanced vector TMR prototype meeting appropriate technology readiness level metrics, Navy test and validation support, manufacturing transition plans for unmanned underwater vehicle programs, and exploration of commercial applications in magnetic surveying and unexploded ordnance detection. The technology is controlled under ITAR (22 CFR Parts 120-130) and EAR (15 CFR Parts 730-774) regulations, requiring disclosure of any foreign national involvement. CMMC Level 2 (Self) compliance is required. Technical points of contact are Amanda Bobe (amanda.l.bobe.civ@us.navy.mil) and Noah Schulz (noah.c.schulz.civ@us.navy.mil).
View the file
Other files
| File | Type | Posted |
|---|---|---|
| NAVY_SBIR_27BZ_PH I_R2.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DON27BZ02-NV015: High Sensitivity Tunneling Magnetoresistive Magnetometers
PROJECTED CMMC LEVEL REQUIREMENT:
Level 2 (Self)
TECHNOLOGY AREAS:
None
MODERNIZATION PRIORITIES:
Microelectronics | Quantum Science
KEYWORDS:
Magnetometery, Tunneling Magnetoresistance, Magnetic Anomaly Detection
ADDITIONAL INFORMATION
N/A
OBJECTIVE:
Modernize United States capabilities to produce ultra-low size, weight, power, and cost (SWAP-C) tunneling magnetoresistive magnetometers with industry leading sensitivities.
ITAR:
The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with section 3.5 of the Announcement. Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.
DESCRIPTION:
Many Navy systems utilize magnetometer technologies for the remote detection, localization, and classification of ferrous objects. Decades of research into different technologies including optically pumped magnetometers have provided highly sensitive technologies which meet most Navy sensitivity needs. However, higher sensitivity magnetometers also possess increased SWAP-C, which limits their applicability in many Navy applications.
Therefore, there is a direct need for highly sensitive magnetometers that are also compact, low cost, and low power to support a broader range of Navy mission requirements including one-way attack vehicles, expeditionary warfare, mine warfare, and swarming systems. Over the past 30 years, an adjacent technology known as tunneling magnetoresistance (TMR) has had drastic improvements in system sensitivities, unlocking a potential new regime of magnetometer technologies that exhibit ultra-low SWAP-C while maintaining Navy relevant sensitivities.
Design Requirements:
-Size: less than 10 mm x 10 mm per axis -Power: less than 100 mW per axis -Sensitivity: less than 50 pT/rt(Hz) @ 1 Hz -Frequency Range: DC-500KHz -Dynamic Range: -100 uT to 100 uT -Nonlinearity over dynamic range: less than 0.1 % -Standardized per unit electrical packaging
PHASE I:
Produce a concept for single-axis TMR sensors that possess a design that satisfies the above criteria and also include a per sensor voltage-to-field calibration for confirmation by stakeholders. Provide an analysis or discussion of the potential tradeoffs in the Phase I report if the design concept cannot meet the design objectives.
(Note: Justification for the prior should include comparative analysis of COTS capabilities, U.S. and International.)
PHASE II:
Fabricate 6 or 9 prototype systems for evaluation and testing in a vector configuration including voltage-to-field calibration for each sensor. Demonstrate that the prototypes achieve or show potential for meeting the design requirements and intended use applications. Conduct testing in conjunction with Navy personnel. Address both cost effectiveness and manufacturability feasibility as part of the prototype test and evaluation. Consult the appropriate acquisition program office for any additional evaluation metrics needed for Phase III. Perform potential commercialization cost analysis to estimate at production cost per unit and prepare a Phase III commercialization/transition plan.
PHASE III DUAL USE APPLICATIONS:
Apply the knowledge gained in Phase II to build an advanced vector TMR prototype that meets appropriate technology readiness level (TRL) metrics set by the acquisition program office. Support the Navy for test and validation of the system for certified Navy use. Develop manufacturing plans to facilitate transition to a UUV program of record.
Explore the potential to transfer these TMR sensors for potential commercial use in magnetic surveying and UXO detection.
REFERENCES:
TDK: “New Development Based on High-Sensitivity Nivia xMR Sensor: Measurement of Weak Magnetic Fields from Minute Areas.” https://product.tdk.com/en/techlibrary/developing/bio-sensor/migne-xmr-sensor.html
1.
TECHNICAL POINT OF CONTACT (TPOC):
TPOC-1: Amanda Bobe
PHONE: N/A
EMAIL: amanda.l.bobe.civ@us.navy.mil
TPOC-2: Noah Schulz
PHONE: N/A
EMAIL: noah.c.schulz.civ@us.navy.mil
File details come from the government source that posted it. Updated .