Fiber Optic Repair Sets (FORS) Pilot Production Units (PPUs), testing, data requirements and up to four hundred (400) production units

This will be a five (5) year Fixed-Price indefinite delivery, indefinite quantity (IDIQ) contract with one (1) base year and four (4) ordering periods for the procurement of two (2) Fiber Optic Repair Sets (FORS) Pilot Production Units (PPUs), testing, data requirements and up to four hundred (400) production units. The Fiber Optic Repair Set (FORS) contains the tools for performing splice repairs to aircraft fiber optic cables. The FORS will be used to condition the fiber end faces; splice the fiber ends; and restore the physical integrity of the cable.

Attached please find:

1. Solicitation N68335-16-R-0052
2. Statement of Work
3. Log CDRLS
4. ALSSOW
5. Tech CDRLs
6. Spec

Proposals due 16 May 2016 by 16:00 EDT

AMENDMENT #1

The purpose of this amendment is to answer questions received in response to the FORS solicitation.

All other terms and conditions remain unchanged.

The Government Point of Contact is:              
Keith Welge
keith.welge@navy.mil 
(732) 323-7213

QUESTION #1
In the System Specification, page 7, there is a table of five fiber optic cables.  It seems that at least three of them are no longer available, or at least current information on them is lacking.  Are these part numbers are still available? 

ANSWER #1
Yes, additional information is provided in the table below. 

4.2.1.1  Fiber types - The fiber types requirements in section 3.2.1.1 shall be verified via demonstration by performing 25 splices on each of the following fiber types (or their equivalents).  The table below has a listing of the sizes and alternate manufacturer's part numbers.

 
QUESTION #2
Can proposals contain multiple configurations?

ANSWER #2
No, proposals cannot contain multiple configurations.  However, alternate proposals are acceptable in accordance with Section L, Part A, of the solicitation.

QUESTION #3
In the SPS, paragraph 4.3.2, reference is made to Table V of MIL-STD-461F.  However, it is Table IV that lists the specific tests.  Should the reference be to Table IV?

ANSWER #3
Yes, Table IV is the correct reference.


 

AMENDMENT #2

The purpose of this amendment is extend the due date for proposals from 09 May 2016, 16:00 EDT to 16 May 2016, 16:00 EDT.

 In accordance with Section L, sealed offers with original and five (5) copies of the Technical and Past Performance Volumes and one (1) copy of the Price Volume for furnishing the supplies or services in the schedule are due by 16 May 2016, 16:00 EDT.  Proposals are not to be submitted via facsimile or electronically via email.

All other terms and conditions remain unchanged. 

The Government Point of Contact is:            
Keith Welge   
(732) 323-7213

AMENDMENT #1

The purpose of this amendment is to answer questions received in response to the FORS solicitation.

All other terms and conditions remain unchanged.

The Government Point of Contact is:
Keith Welge
keith.welge@navy.mil
(732) 323-7213

QUESTION #1
In the System Specification, page 7, there is a table of five fiber optic cables. It seems that at least three of them are no longer available, or at least current information on them is lacking. Are these part numbers are still available?

ANSWER #1
Yes, additional information is provided in the table below.

4.2.1.1 Fiber types - The fiber types requirements in section 3.2.1.1 shall be verified via demonstration by performing 25 splices on each of the following fiber types (or their equivalents). The table below has a listing of the sizes and alternate manufacturer's part numbers.

FIBER SIZE

TYPE

P/N

MANUFACTURER

COMMENTS

9/125

SM

F19163

Optical Fiber Solutions (OFS)

OFS Specialty Photonics Division, phone

860-678-0371

9/125

SM

RMS12-2515 Type 1

Raytheon

50/125

MM-GI

C14370

OFS

50/125

MM-GI

BC06815

OFS

50/125

MM-GI

AS5382/5

Society of Automotive Engineers (SAE) Spec

62.5/125

MM-GI

M85045/16-01

Draka

62.5/125

MM-GI

S458T-01-62G

Draka

62.5/125

MM-GI

OC 1468

General Cable

62.5/125

MM-GI

OC-0003213

Optical Cable Corporation (OCC)

62.5/125

MM-GI

M62SX01C3NLO20

Fiber Instrument Sales (FIS)

100/140

MM-GI

OC 1260

General Cable

Polyimide buffer

100/140

MM-GI

AS5382/1

SAE Spec

200/230

MM-SI

CF01493-10

OFS

200/230

MM-SI

AS5382/6

SAE Spec

QUESTION #2
Can proposals contain multiple configurations?

ANSWER #2
No, proposals cannot contain multiple configurations. However, alternate proposals are acceptable in accordance with Section L, Part A, of the solicitation.

QUESTION #3
In the SPS, paragraph 4.3.2, reference is made to Table V of MIL-STD-461F. However, it is Table IV that lists the specific tests. Should the reference be to Table IV?

ANSWER #3
Yes, Table IV is the correct reference.

.

AMENDMENT #1

The purpose of this amendment is to answer questions received in response to the FORS solicitation.

All other terms and conditions remain unchanged.

The Government Point of Contact is:              
Keith Welge
keith.welge@navy.mil 
(732) 323-7213

QUESTION #1
In the System Specification, page 7, there is a table of five fiber optic cables.  It seems that at least three of them are no longer available, or at least current information on them is lacking.  Are these part numbers are still available? 

ANSWER #1
Yes, additional information is provided in the table below. 

4.2.1.1  Fiber types - The fiber types requirements in section 3.2.1.1 shall be verified via demonstration by performing 25 splices on each of the following fiber types (or their equivalents).  The table below has a listing of the sizes and alternate manufacturer's part numbers.

 
QUESTION #2
Can proposals contain multiple configurations?

ANSWER #2
No, proposals cannot contain multiple configurations.  However, alternate proposals are acceptable in accordance with Section L, Part A, of the solicitation.

QUESTION #3
In the SPS, paragraph 4.3.2, reference is made to Table V of MIL-STD-461F.  However, it is Table IV that lists the specific tests.  Should the reference be to Table IV?

ANSWER #3
Yes, Table IV is the correct reference.

This will be a five (5) year Fixed-Price indefinite delivery, indefinite quantity (IDIQ) contract with one (1) base year and four (4) ordering periods for the procurement of two (2) Fiber Optic Repair Sets (FORS) Pilot Production Units (PPUs), testing, data requirements and up to four hundred (400) production units. The Fiber Optic Repair Set (FORS) contains the tools for performing splice repairs to aircraft fiber optic cables. The FORS will be used to condition the fiber end faces; splice the fiber ends; and restore the physical integrity of the cable.

Attached please find:
1. Solicitation N68335-16-R-0052
2. Statement of Work
3. Log CDRLS
4. ALSSOW
5. Tech CDRLs
6. Spec

Proposals due 09 May 2016 by 16:00 EDT

.

This will be a five (5) year Fixed-Price indefinite delivery, indefinite quantity (IDIQ) contract with one (1) base year and four (4) ordering periods for the procurement of two (2) Fiber Optic Repair Sets (FORS) Pilot Production Units (PPUs), testing, data requirements and up to four hundred (400) production units. The Fiber Optic Repair Set (FORS) contains the tools for performing splice repairs to aircraft fiber optic cables. The FORS will be used to condition the fiber end faces; splice the fiber ends; and restore the physical integrity of the cable.

Attached please find:

1. Solicitation N68335-16-R-0052
2. Statement of Work
3. Log CDRLS
4. ALSSOW
5. Tech CDRLs
6. Spec

Proposals due 09 May 2016 by 16:00 EDT