Evaluation and repair of an/SPS-49 motor generator and an/SPS-49 centrifugal pump unit

SOLICITATION AMENDMENT 0004:

Reason for amendment is to:
1.) Add language under SOW paragraph 3.6, Centrifugal Pump Requirements, stating "The Contractor shall test each Centrifugal Pump in accordance with Section VI - Post Reassembly Testing of the Overhaul and Repair Manual S 6225-QR-MMD-010 and document performance".

2.) Add attachment 2, Overhaul Repair Manual- Centrifugal Pump S 6225-QR-MMD-010.1

SOLICITATION AMENDMENT 0003

Reason for amendment is to:

1.) Remove drawing 707342, Environmental Specs for AN/SPS-49 Purchased Parts (Exhibit L). The Centrifugal Pump Acoustic Noise Test, MIL-STD-740, is no longer a requirement. Reference to drawing 707342 has been removed from the Statement of Work under paragraph 2.0, Applicable Documents.

2.) Extend the closing date of the solicitation to 4pm, Eastern Standard Time on Friday, 1/27/2017.1

SOLICITATION AMENDMENT 0002

Reason for amendment is to 1.) extend the closing date of this solicitation (All offers must be received by 4:00pm Eastern Standard Time on 01/17/2017), and 2.) update Contract Specialist contact information.

AMENDMENT 0001

The purpose of this amendment is the address the following: 1) Add clause 52.216-27 Single or Multiple Awards. A) Multiple aw ard may be based on CLIN's 0001-CLIN's 0005 w ith regards to the evaluation or overhaul/refurbishment of the AN/SPS-49 Motor Generator (P/N 952546). B) Multiple aw ard may be based on CLIN's 0006-CLIN's 0008 w ith regards to the evaluation or overhaul/refurbishment of the AN/SPS-49 Centrifugal Pump Unit (P/N 855552). 2) Extend the closing date of this solicitation from 4:00 p.m. local time on 23NOV2016 to 4:00p.m. local time on 30NOV2016.
All other terms and conditions remain unchanged.

SOLICITATION & CONTROLLED DOCUMENTS

N00164-17-R-GR77 - EVALUATION AND REPAIR OF AN/SPS-49 MOTOR GENERATOR AND AN/SPS-49 CENTRIFUGAL PUMP UNIT - FSG 58 - NAICS 334511

Anticipated RFP issue date 24 OCT 2016 - Anticipated closing 23 NOV 2016 Time - 2:00 PM EST

Naval Surface Warfare Center (NSWC) Crane has a requirement for the evaluation and repair of AN/SPS-49 Motor Generator and AN/SPS-49 Centrifugal Pump Unit in accordance with the Statement of Work. CLINs are listed below.
CLIN 0001: Evaluation and Standard Overhaul/Refurbishment of AN/SPS-49 Motor Generator (P/N 952546)
CLIN 0002: Rewind Alternating Current (AC) Stator Overhaul/Refurbishment of AN/SPS-49 Motor Generator (P/N 952546)
CLIN 0003: Rewind Direct Current (DC) Fields and Interpoles Overhaul/Refurbishment of AN/SPS-49 Motor Generator (P/N 952546)
CLIN 0004: Rewind Armature Overhaul/Refurbishment of AN/SPS-49 Motor Generator (P/N 952546)
CLIN 0005: AN/SPS-49 Motor Generator (P/N 952546) - Beyond Economical Repair (BER)
CLIN 0006: Evaluation and Standard Overhaul/Refurbishment of AN/SPS-49 Centrifugal Pump Unit (P/N 855552)
CLIN 0007: Major Overhaul/Refurbishment of AN/SPS-49 Centrifugal Pump Unit (P/N 855552)
CLIN 0008: AN/SPS-49 Centrifugal Pump Unit (P/N 855552) - Beyond Economical Repair (BER)
CLIN 0009 - Data (Not Separately Priced (NSP))

A 5 year Firm-Fixed Price (FFP) Indefinite Delivery, Indefinite Quantity (IDIQ) contract is anticipated to be awarded as a result of full and open competition after exclusion of sources with 100% Small Business Set--aside IAW FAR 6.203. Anticipated contract minimum is 5/ea CLIN 0001 Evaluation and Standard Overhaul/Refurbishment of AN/SPS-49 Motor Generator and minimum of 5/ea CLIN 0006 Evaluation and Standard Overhaul/Refurbishment of AN/SPS-49 Centrifugal Pump Unit. Delivery is FOB Destination.
Contractors must be properly registered in the System for Award Management (SAM) and in the Joint Certification Program (JCP) in order to receive the solicitation attachments. Offerors may obtain information on SAM registration and annual confirmation requirements by calling 1-866-606-8220 or via the internet at https://www.sam.gov. Information about JCP is located at http://dlis.dla.mil.

The solicitation attachments will be posted to FedBizOpps at the same time the solicitation is posted. FedBizOpps may be accessed at http://www.fbo.gov. Interested contractors must be registered in the System for Award Management (SAM) and in the Joint Certification Program (JCP) in order to receive the solicitation attachments.

All changes that occur prior to the closing date will be posted to the FedBizOpps website. For changes made after the closing date, only those offerors that provide a proposal will be provided any changes/amendments and considered for future discussions and / or award.
Questions or inquiries should be directed to Pamela Ryan, Code 0241, telephone 812-854-8849, e-mail pamela.d.ryan@navy.mil. Please reference the above solicitation number when responding to this notice.