Correct Atta 1-3 Drawings_Non-WorkPlanOMA_ARCH.pdf

A

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

ARCHITECTURAL

A-1

GENERAL NOTES

NOT IN THIS CONTRACT.

ALL FURNITURE WHICH IS SHOWN ON FLOOR PLANS AND DETAIL DRAWINGS IS GFGI AND

MANUFACTURES INDICATED.

PURPOSES ONLY. AND NOT INTENDED TO LIMIT SELECTIONS TO PRODUCTS OF THE

COLORS AND PATTERNS LISTED BY MANUFACTURES ARE FOR BIDDING IDENTIFICATION 1.

ADJACENT AREAS AS DIRECTED BY THE CONTRACTING OFFICER REPRESENTATIVE (COR).

CAUSED BY THIS PROJECT AND SHALL REPAIR THE DAMAGES TO MATCH UP TO

CONTRACTOR SHALL BE RESPONSIBLE FOR ALL DAMAGES MADE TO EXISTING AREAS

FOR APPROVAL.

CONTRACTOR ACCORDING TO ACTUAL FIELD CONDITION AND SUBMITED TO COR

CONDITION. IN THAT CASE, SHOP DRAWINGS SHALL BE PREPARED AT THE SITE BY THE

SOME DETAILS SHOWN ON CONTRACT DRAWINGS MAY NOT COINCIDE WITH THE FIELD

8.

FOR APPROVAL.

CONTRACTOR SHALL SUBMIT MANUFACTURER'S INSTALLATION SHOP DRAWINGS TO COR

2.

3.

4.

5.

6.

7.

CONTRACTOR SHALL NOTIFY THE CONTRACTING OFFICER

IF THERE ARE ANY CONFLICTS WITHIN THE CONTRACT DOCUMENT. THE GENERAL

AND DIMENSIONS PRIOR TO COMMENCING ANY CONSTRUCTION OR RENOVATION.

THE CONTRACTOR SHALL BE RESPONSIBLE IN VERIFYING ALL EXISTING CONDITION

OF THE LOAD BEARING WALLS TO PREVENT COLLAPSE OF THE STRUCTURE

APPROPRIATE TEMPORARY SUPPORTS SHALL BE CONSTRUCTED PRIOR TO DEMOLITION

9.

10.

11.

12.

13.

14.

15.

BE AS A PART OF THE CONTRACT DOCUMENT OF THIS PROJECT.

STANDARD DETAIL DRAWINGS FOR O&MA PROJECT, KOREA, DATED OCTOBER 1, 2003 SHALL

NUMBERS ARE FROM TM-5-807-7 AND FEDERAL STANDARD NO. 595b, COLORS.

COLOR OF MATERIALS & PAINTS SHALL BE SELECTED BY USING AGENCY AND COLOR

DETAILS AND GET APPROVAL FROM COR. BEFORE FABRICATION AND INSTALLATION.

CONTRACTOR SHALL PREPARE SHOP DRAWINGS FOR ALL DOOR/WINDOW

SPECIFICATION 15181.

ITEMS REQUIRING MAINTENANCE/OPERATION IAW THE SECTION 3.1.14, OMA STD

PROVIDE ACCESS DOORS FOR ALL CONCEALED VALVES, VENTS, CONTROLS AND OTHER

16.

WITHOUT ADDITIONAL COST TO THE GOVERNMENT.

HEATING, EQUIPMENT, ETC), ELECTRICAL, TELEPHONE AND FIRE ALARM SYSTEM

REQUIRED FOR THE INSTALLATION AND/OR REPLACEMENT OF MECHANICAL (PLUMBING,

OBSTRUCTED ITEMS, CUT, PATCH AND RESTORE WALLS, FLOORS AND CEILING WHERE

THE CONTRACTOR SHALL BE RESPONSIBLE FOR REMOVAL/REINSTALLATION OF ANY

OFFICE, DPW. PER DIRECTION FROM COR

SALVAGE OR SERVICEABLE MATERIALS SHALL BE RETURNED TO SUPPLY OR STORAGE

FROM THE MANUFACTURE SHOWING THE PRODUCT IS LEAD FREE.

A CERTIFICATE OR MATERIAL SAFETY DATA SHEET (MSDS), WRITTEN IN ENGLISH,

SOLIDS) DURING THE EXECUTION OF THIS PROJECT. THE CONTRACTOR SHALL PROVIDE

COATINGS WITH LESS THAN 0.05 PERCENT LEAD BY WEIGHT OF THE NON-VOLATILE

THE CONTRACTOR IS REQUIRED TO USE "LEAD FREE" COATINGS (LIQUID PAINTS OR

WALL : 2.290 SM. DEG K/W

ROOF : 4.215 SM. DEG K/W

R-VALUE for INSULATION :

SCOPE OF WORK (ARCHITECTURAL WORK)

1. FLOOR WORK

1.1

1.2

1.3

1.4

MEMBRANE, MORTAR BED AS SHOWN ON FLOOR PLANS, SECTION AND DETAILS DRAWINGS.

REPLACE DETERIORATED EXISTING FCT WITH NEW INCLUDING CEMENT BOND COAT, WATERPROOF

AND INTERIOR FINISH SCHEDULE.

APPLY EPOXY COATING WITH NON SLIP GRITS ON EXISTING FLOORS AS SHOWN ON FLOOR PLAN

PROVIDE LEVELING CONCRETE FOR EXISTING CONCRETE SLAB IF NEEDED.

HIGH SPOTS, PAINTING, AND UNEVEN SURFACE SHALL HAVE BEEN CORRECTED FOR NEW FLOORING.

TRUE, LEVEL PLANE WITH ALL DEFECTS SUCH AS ROUGH OR SCALING CONCRETE, LOW SPOTS,

FLOOR PLAN & INTERIOR FINISH SCHEDULE. THE EXISTING CONCRETE FLOORING SHALL BE SMOOTH, REPLACE DETERIORATED EXISTING FLOOR TILE WITH NEW PVCT INCLUDING VCB AS SHOWN ON NEW

2. INTERIOR & EXTERIOR WALL WORK

2.1

2.2

2.3

2.4

2.5

INTERIOR FINISH SCHEDULE.

PAINT ALL EXISTING INTERIOR WALLS INCLUDING AS SHOWN ON FLOOR PLAN, DETAIL DRAWINGS

ON FLOOR PLANS AND SECTIONS.

WATERPROOF MEMBRANE, PLASTERING W/METAL LATH AND WATERPROOF GWB AS SHOWN

REPLACE DETERIORATED EXISTING GCWT WITH NEW INCLUDING CEMENT BOND COATS,

AND DETAIL DRAWINGS.

REPLACE EXST EXTERIOR WALLS WITH NEW EIFS AS SHOWN ON FLOOR PLAN, ELEVATIONS, SECTIONS, 3.4

3.2

3.3

3.1

3. INTERIOR & EXTERIOR CEILING/ROOF WORK

ON FLOOR PLANS AND FINISH SCHEDULE.

WATER RESISTANT OR 'X' TYPE) CEILING INCLUDING CEILING SUSPENSION SYSTEM AS SHOWN

REPLACE DETERIORATED EXISTING CEILING WITH NEW GYPSUM WALL BOARD (GWB, NORMAL,

SECTION.

PAINT ON ALL INTERIOR CEILING SURFACES AS SHOWN ON INTERIOR FINISH SCHEDULE AND

METAL SUSPENSION SYSTEMS AS SHOWN ON FLOOR PLANS AND INTERIOR FINISH SCHEDULE.

REPLACE DETERIORATED EXISTING CEILING WITH NEW ACOUSTICAL CEILING TILES INCLUDING

FINISH SCHEDULE.

APPLY SKIM COAT PLASTER ON CONCRETE WALLS AS SHOWN ON FLOOR PLAN, SECTIONS AND

3.5

FINISH SCHEDULE.

APPLY SKIM COAT PLASTER ON CONCRETE CEILINGS AS SHOWN ON FLOOR PLAN, SECTIONS AND

3.6

ELEVATIONS AND DETAIL DRAWINGS.

REPLACE DETERIORATED EXISTING METAL CANOPY WITH NEW AS SHOWN ON FLOOR PLAN,

3.7

ON DOOR/WINDOW SCHEDULE. (NATURAL COLOR, OAK)

REPLACE DETERIORATED EXISTING WOODEN HEAD, JAM & SILL FOR ALL WINDOWS WITH NEW AS SHOWN

4.6

4.7

4.8

PLANS AND DETAIL DRAWINGS.

REPLACE DETERIORATED EXISTING ALL TOILET ACCESSORIES WITH NEW AS SHOWN ON FLOOR

4.1

4.3

4.4

4.5

4.2

4. MISC. WORK

REPLACE DETERIORATED EXISTING WINDOW HORIZONTAL MINI BLINDS WITH NEW, FIREPROOF TYPE.

SETS AS SHOWN ON NEW FLOOR PLAN AND DOOR SCHEDULE.

REPLACE DETERIORATED EXISTING DOORS AND DOOR FRAMES WITH NEW INCLUDING HARDWARE

AND WINDOW SCHEDULE.

THERMAL BREAKER TYPE WINDOWS INCLUDING GLASS AS SHOWN ON FLOOR PLANS, ELEVATIONS

REPLACE DETERIORATED EXISTING WINDOWS INCLUDING INSECT SCREEN WITH NEW ALUMINUM

AND LOUVER SCHEDULE.

REPLACE DETERIORATED EXISTING ALUMINUM LOUVER WITH NEW AS SHOWN ON FLOOR PLANS

AND SIGNAGE SCHEDULE.

REPLACE INTERIOR & EXTERIOR SIGNAGES WITH NEW AS SHOWN ON FLOOR PLAN, ELEVATIONS

FLOOR PLANS AND DETAIL DRAWING.

REPLACE DETERIORATED EXISTING FIRE EXTINGUISHERS CABINETS(FEC) WITH NEW AS SHOWN ON

REPLACE DETERIORATED EXISTING METAL SHELF WITH MOP RACK WITH NEW IN JANITOR ROOM.4.9

4.10

4.11

4.13

4.14

4.15

4.16

4.17

4.12

DRAWING AND SIGNAGE SCHEDULE.

REPLACE DETERIORATED EXISTING BULLETIN BOARD WITH NEW AS SHOWN ON FLOOR PLAN, DETAIL

PLANS, DETAIL DRAWINGS AND INTERIOR FINISH SCHEDULE.

REPLACE DETERIORATED EXISTING UNIVERSAL TV WALL MOUNT WITH NEW AS SHOWN ON FLOOR

REPLACE DETERIORATED ACCESS DOORS WITH NEW ON WALL & CEILING AS REQUIRED.

ON FLOOR PLAN, ELEVATION AND MATERIAL FINISH SCHEDULE.

REPLACE DETERIORATED EXISTING LOCKERS WITH NEW(2TIER) INCLUDING LOCKSET AS SHOWN

4.18

DRAWING.

BASE CABINETS AND UPPER CABINETS AS SHOWN ON FLOOR PLAN, INTERIOR ELEVATION AND DETAIL

REPLACE DETERIORATED EXISTING LAVATORY CABINETS AND KITCHEN CABINET WITH NEW INCLUDING

SHOWN ON FLOOR PLANS, SECTIONS AND DETAIL DRAWINGS.

NORMAL, WATER RESISTANT OR 'X' TYPE) INCLUDING METAL STUDS AND INSULATIONS AS

REPLACE DETERIORATED EXISTING ALL GWB WALL BOARD WALLS WITH NEW GWB WALL (GWB,

NEW CONSTRUCTION (L) WORK

ON FLOOR PLAN AND DETAIL DRAWING.

INSTALL TRENCHES WITH NEW AT MUD AREA, MUD ROOM, EYE WASHERROOM AND LAB AS SHOWN

AND INTERIOR FINISH SCHEDULE.

INSTALL QUARRY TILE INCLUDING QUARRY TILE BASE WITH NEW AS SHOWN ON FLOOR PLANS

ON FLOOR PLAN, INTERIOR ELEVATION AND DETAIL DRAWING.

INSTALL WOODEN SHOWER BENCHS, SHOWER CURBS AND SHOWER CURTAINS WITH NEW AS SHOWN

DETAIL DRAWINGS AND INTERIOR FINISH SCHEDULE.

INSTALL PROJECTION SCREEN AND PROJECTOR MOUNT WITH NEW AS SHOWN ON FLOOR PLANS,

DETAIL DRAWING.

INSTALL SST HANDRAIL, GURARD RAIL, AND SST BOOT SCRAPER AS SHOWN ON FLOOR PLAN AND

ON FLOOR PLANS, ELEVATIONS, SECTIONS AND DETAIL DRAWINGS.

INSTALL RAIN GUTTERS, DOWNSPOUTS AND CONCRETE SPLASH BLOCKS WITH NEW AS SHOWN

ON FLOOR PLAN, ROOF PLAN, ELEVATIONS AND DETAILS.

REPLACE DETERIORATED EXISTING ROOF WITH NEW STANDING SEAM METAL ROOF AS SHOWN

SCOPE OF WORK & GENERAL NOTES

REPAIR BUILDING

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

ARCHITECTURAL

A-2

,0

11,841

6,6601815,000

,6

,4

1/100

SCALE:

EXST/REMOVAL GROUND FLOOR PLAN

LEGEND

REMOVAL WALL

REMOVE EXISTING WINDOW

& WINDOW FRAME

REMOVE EXISTING DOOR

& DOOR FRAME

REMOVE EXISTING CONC SLAB

EXST/REMOVAL GROUND FLOOR PLAN

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

A-3

ARCHITECTURAL

NEW GROUND FLOOR PLAN

BUILDING AREA

EXISTING BLDG

NEW WORK AREA

TOTAL

NEW BLDG

REPAIR WORK AREA (1,730 SF) 160.72 SM

(3,730 SF) 346.50 SM

185.78 SM

1/100

SCALE:

NEW GROUND FLOOR PLAN

1/100

SCALE:

NEW GROUND FLOOR PLAN

S S

DS

DS

ROOM

COMM

STORAGE

DN

DN

FEC

DS DS

DS DS DS

SHOWER

M.TOILET/

SHOWER

W.TOILET/

J/C

MUD ROOM

MUD AREA

OFFICE

OFFICE

LAB

WASHER RM

EYE

CORRIDOR

VEST

VEST

,0

,7

,4

,8

CONTAINMENT FL

SECONDARY

23,100

5,8505,2003,8803,8004,370

,0

,6

,9

,1

,4

,7

,1

23,100

6,6506,3004,3005,850

RM

CONFERENCE

MOUNT

TV WALL

LOCKER ROOM

READY / WAITING /

ROOM

MECH/ELEC

FEC

103104

105106

FEC

(2,000 SF)

D7

D2 D9 D8 D1

D5

D6

D4

D3

D10D11

D12

D13

D14

D15

D12

D13

D14

D16

D10

W1 W1 W1

W2W2W2W2W3W3L1

LEGEND

WINDOW FRAME

NEW WINDOW &

DOOR FRAME

NEW DOOR &

CONC WALL

150 MET STUD WALL

200 MET STUD WALL

90 MET STUD WALL

65 MET STUD WALL @ CONC WALL ONLY

DS

W1W1

A-7

A-7

A-5

A-5

A-6

A-6

B/B

B/B

B/B

EWC

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

A-4

ARCHITECTURAL

P E

R

R O

O F

S L

O P

E

R

R O

O P

E

DS DSDS

STANDING SEAM

METAL ROOFING

W/INSUL ON VR

DS DSDS

GUTTER SLOPE

1 PER 200

GUTTER EXPANSION JOINT

GUTTER SLOPE

1 PER 200

GEJ GEJ GEJDS

DSGEJ GEJ

24,500

,4

ROOF PLAN

SCALE: 1/100

STANDING SEAM

METAL CANOPY

METAL ROOFING

ROOF PLAN

2,700

,0

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

A-5

ARCHITECTURAL

ELEVATIONS-1

FL

STANDING SEAM

METAL ROOFING

W/ INSUL ON VR

SYSTEM

EXT INSUL & FNSH

FIXED WINDOW

AL BLAST

STANDING SEAM

METAL ROOF

CANOPY

FL

1/100

SCALE:

ELEVATION-1

1/100

SCALE:

ELEVATION-2

GL

GL

STANDING SEAM

METAL ROOFING

W/ INSUL ON VR

SYSTEM

EXT INSUL & FNSH

INSULATED AL DOOR

& GUARDRAIL

SST HANDRAIL

DOWNSPOUT

RAIN GUTTER &

PROTECTED METAL

SST HANDRAIL

EIFS FINISH COAT

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

A-6

ARCHITECTURAL

ELEVATIONS-2

FL

STL PIPE

PAINT ON

& GUARDRAIL

SST HANDRAIL

SLIDING WINDOW

AL BLAST

& GUARDRAIL

SST HANDRAIL

FL

STANDING SEAM

METAL ROOFING

W/ INSUL ON VR

(TYP)

SYSTEM

EXT INSUL & FNSH

STANDING SEAM

METAL ROOF

CANOPY

DOWNSPOUT

RAIN GUTTER &

PROTECTED METAL

1/100

SCALE:

ELEVATION-3

1/100

SCALE:

ELEVATION-4

GL

GL

ON CONC COLUMN

EIFS COATING ONLY

SYSTEM

EXT INSUL & FNSH

DOWNSPOUT

RAIN GUTTER &

PROTECTED METAL

& GUARDRAIL

SST HANDRAIL

THERMAL INSULATED

METAL DOOR (TYP)

& HANDRAIL

BOOT SCRAPER

EIFS FINISH COATEIFS FINISH COAT

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

A-7

ARCHITECTURAL

W.P

CONC

TOP OF

POINT

WORKING

BEAM

FL

W.P

,2

,3

LOCKER ROOM

READY / WAITING /

CORRIDOR

RM

CONFERENCE

,0

,0

W1 W2

CROSS SECTION

SCALE: 1/50

FL

W/ INSUL ON VR

(TYP)

STANDING SEAM

METAL ROOFING

METAL ROOF

LINER (TYP)

C

G

H

T

C-100x50x20x3.2

@ 400 OC (MAX)

GALV STL

PROTECTED MET

SHEET FASCIA ON

,4

FL

RM

CONFERENCE

CORRIDOR

VEST

ROOM

COMM

STORAGE

SHOWER

M.TOILET/

J/C

SHOWER

W.TOILET/

C

T

,1

C

T

,4

LONGITUDINAL SECTION

SCALE: 1/50

SEE CIVIL DWG

(BEHIND)

CONC RAMP

W/100THK GLASS FIBER

@ 400 O.C.(MAX)

ON 150 MET STUD

ON 15THK FIRE RATED GWB

PAINT

INSULATION (TYP)

W/ INSUL ON VR

(TYP)

STANDING SEAM

METAL ROOFING

ROOF LINER (TYP)

PROTECTED MET

TOP OF

V A

R ,3

CONC BEAM & SLAB

(TYP)

CONC WALL & CEILING

PAINT ON SCP ON

,6

C

T

,4

C

T

SECTIONS

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

A-8

ARCHITECTURAL

S S

DSDS

DS

ROOM

COMM

STORAGE

DN

DN

FEC

DS DS

DS DS DS

SHOWER

M.TOILET/

SHOWER

W.TOILET/

J/C

MUD ROOM

MUD AREA

OFFICE

OFFICE

LAB

WASHER RM

EYE

CORRIDOR VESTVEST

RM

CONFERENCE

MOUNT

TV WALL

LOCKER ROOM

READY / WAITING /

ROOM

MECH/ELEC

FEC

101116

FEC

W1

D2 D9

D8 D1

D5

D6

D4

D3

D10D11

D12

D13

D14

D15

D12

D13

D14

D16

D10

W1 W1 W1 W1

W2W2W2W2W3W3L1

9001,8001,4001,8001,7001,8001,0001,8002,2001,8001,2506,0502,0001,500

,4

,2

,0

,0

,1

,5

,0

,0

,9

,7

1,2001,2001,5001,2001,4001,2001,7001,2006509509002,0302,0709001,0304,370

,7

,0

,9

2,2502,2501,0005501,0004,8571,0004039003,3191,0006651,0008052,100

3,0501,0005501,0008,0501,0006321,0002,318

,6

,9

2,650

,1

4,000

,4

,1

2,1501,820

SCALE:

ENLARGED FLOOR PLAN

1/50

SLOPE SLOPE

2,600

1,900

,2

ENLARGED FLOOR PLAN

B/B

B/B

B/B

& HANDRAIL

BOOT SCRAPER

(TYP)

COVERED TRENCH

AL. GRATING

(TYP)

COVERED TRENCH

SST GRATING

EWC

LEGEND

WINDOW FRAME

NEW WINDOW &

DOOR FRAME

NEW DOOR &

CONC WALL

150 MET STUD WALL

200 MET STUD WALL

90 MET STUD WALL

65 MET STUD WALL @ CONC WALL ONLY

150 MET STUD WALL W/100T INSULATION

200 MET STUD WALL W/100T INSULATION

D7

SMLD

LAV

SHOWER

M.TOILET/

SHOWER

W.TOILET/

J/C

D13D15D13

W3

A

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

LAV 865

800TTD

865SD

STD MTG HGTTOILET ACCESSORYABBREV.

WC 381~432

(IN MM ABOVE FFL)

MIRROR GLASS (TO BOTTOM) FOR COUNTER

MIRROR GLASS (TO TOP)

MG

(RECESSED DUAL ROLL)

SOAP DISPENSER (COUNTER TOP)

COUNTER TOP LAVATORY (TO RIM)

WATER CLOSET (SEAT TOP)

TP TOILET PARTITION (TO TOP)

HANDICAP MTG HGT

432-483

(IN MM ABOVE FFL)

QUANTITY

SEE ELEVS. & PLANS

SEE ELEVS. & PLANS

SEE ELEVS. & PLANS

SEE ELEVS. & PLANS

SEE ELEVS. & PLANS

SEE ELEVS. & PLANS

SERVICE SINK (TO RIM)

SS

PTDWR

UR

SND SANITARY NAPKIN DISPOSER (TO TOP)

MOP RACK

MR 1800

URINAL (TO RIM)

PAPER TISSUE DISPENSER W/RECEPTACLE

SEE ELEVS. & PLANS

SEE ELEVS. & PLANS

SEE ELEVS. & PLANS

SEE ELEVS. & PLANS

SEE ELEVS. & PLANS

ACCESSORY MOUNTING HEIGHT SCHEDULE

US URINAL SCREEN (TO TOP) SEE ELEVS. & PLANS1500 1500

EWC ELECTRIC WATER COOLER (TOP SPOUT) 1050 885 SEE ELEVS. & PLANS

GRAB BARGB - 915 SEE ELEVS. & PLANS

(TO PAPER HOLE)

TOILET TISSUE DISPENSER (TO CENTER)

SOAP DISPENSER (TO BOTTOM)SD

MIRROR GLASS (TO BOTTOM)MG

LAVATORY (TO RM)LAV

SEE ELEVS. & PLANS

SEE ELEVS. & PLANS

SCALE: 1/50

PLAN FOR TOILETS

ENLARGED PARTIAL FLOOR

2002,0801,6002001,6002,200200 ,8

,4

,3

2,1601,7203,800

8759002,1052,215900685

D14 D14

8401,2181,8221,6311,520650

PTDWR

PTDWR

TB

TB

,7

D

A

B

C

KEY

ELEVATION

INTERIOR

TTD

WC

SND

TP

UR

,4

MG

TTD

SD SDGB GB

WC

TTDSND

TP

LAV

PTDWR

WC

US

SCALE: 1/50

INTERIOR ELEVATIONS (MEN TOILET 106 )

A B C D

SCALE: 1/50

INTERIOR ELEVATIONS (WOMEN TOILET 104 )

TB

TTD

WC

SND

TP

LAV

SDSDSD

PTDWR

MG

BENCH

SHOWER

TB

,4

A B

TTD

WC

SND

TP

LAV

GB

SC/R

C D

D

SCALE: 1/50

INTERIOR ELEVATIONS JANITOR 105 )

M

R

C K

S

IN

K

,8

MR

SSSS

MR

C

ARCHITECTURAL

A-9

INTERIOR ELEVATIONS - 1

ENLARGED FLOOR PLAN AND

GCWT-1

GCWT-1

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

DS DS

MOUNT

TV WALL

LOCKER ROOM

READY / WAITING /

W1W1 W1

A-10

B

A-10

A

SCALE: 1/50

ENLARGED PARTIAL FLOOR PLAN

5501,0008,0501,000200

6,3004,150

SCALE:

INTERIOR ELEVATIONS AT LOCKER ROOM

1/25

,7

B

M/W

A-14

A-14

A-14

,4

3,300

EQ EQ EQ 950

,4

,8

,2

A-14

SCALE: 1/25

A

INTERIOR ELEVATIONS AT KITCHEN CABINET

ARCHITECTURAL

A-10

INTERIOR ELEVATIONS - 2

ENLARGED FLOOR PLAN AND

ON 150 MET STUD

15 THK GWB

@ 400 OC (MAX)

PAINT ON

(GFGI)

REF

EWC

EWC

(GFGI)

(CFCI)

SEE MECH DWG

ON 150 MET STUD

15 THK GWB

@ 400 OC (MAX)

PAINT ON

D12 D12

GCWT-2

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

A-11

ARCHITECTURAL

KEY PLAN

A-11

1A

A-11

1B

1C

A-11

1D

A-11

W.P

,0

,0

,3

1A

1/25

EXTERIOR WALL SECTIONS

SCALE:

LINER (TYP)

METAL ROOF

,4

C

T

EIFS

WINDOW W/

INSECT SCREEN

INSULATED AL

BLAST SLIDING

MINI BLIND

SCHEDULE

FINISH PER

& SILL (TYP)

WOODEN HEAD, JAMB

OAK

ON 65 MET STUD

15 THK GWB

W/ INSUL ON VR

@ 400 OC (MAX)

SCHEDULE

FINISH PER

POINT

WORKING

TOP OF

CONC BEAM

FL

C-100x50x20x3.2

@ 400 OC (MAX)

GALV STL

PROTECTED MET

SHEET FASCIA ON

SEE CIVIL DWG

(BEHIND)

CONC RAMP

1B

3,200

SCHEDULE

FINISH PER

INSULATED AL

& GUARDRAIL

SST HANDRAIL

DOOR

3,000

MET CANOPY

STANDING SEAM

GALV STL

SHEET SOFFIT

C-100x50x20x3.2

@ 400 OC (MAX)-TYP

PROTECTED MET

PROTECTED MET

SHEET FASCIA

FL

1C

,4

,7

GL

1,900400 400

,6

POINT

WARKING

DWG

SEE CIVIL & STRUC

ON CONC COLUMN

EIFS COATING ONLY

ON CONC COLUMN

EIFS COATING ONLY

PAINT ON STL STRUC

CONC

TOP OF

POINT

WORKING

BEAM

FL

W.P

,3

,2

1D

LINER (TYP)

METAL ROOF

SCHEDULE

FINISH PER

INSULATED AL

BLAST FIXED

WINDOW

& SILL (TYP)

WOODEN HEAD, JAMB

OAK

EIFS

ON 65 MET STUD

15 THK GWB

@ 400 OC (MAX)

QURRY TILE

3,200

W/ 50T INSUL ON VR

,6

W/ INSUL ON VR

(TYP)

STANDING SEAM

METAL ROOFING

S S

DN

DN

FEC

CONTAINMENT FL

SECONDARY

MOUNT

TV WALL

FEC

FEC

EXTERIOR WALL SECTIONS

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

SCALE: 1/25

INTERIOR WALL SECTIONS-1 ARCHITECTURAL

A-12

MOUNT

TV WALL

KEY PLAN

A-12

1A

A-12

1F

1C

A-12

VCB VCB

SEE STRUC DWG

CONC WALL & FOOTING

,1

100THK GLASS FIBER

INSULATION(30KG/m)

(TYP)

ROOF LINER PANEL

PROTECTED METAL

STORAGE

CORRIDOR

ON 12 THK

PAINT

ON CONC SLAB (TYP)

ON CEMENT MORTAR BED

ON WATERPROOFING MEMBRANE

FCT ON CEMENT BOND COAT

ON 12 THK

PAINT

W/GWB CEILING W/GWB CEILING

,4

(TYP)

200MM MTL STUD @ 300 O.C

ON 12THK CEMENT BOARD W/

ON PLASTERING W/MTL LATH

ON WATERPROOFING MEMBRANE

GCWT ON CEMENT BOND COAT

SHOWER

M.TOILET/

SHOWER

W.TOILET/

VCB

(TYP)

ROOF LINER PANEL

PROTECTED METAL

CORRIDOR

PVCT

VCB

PVCTPVCT

& CEILING

ON CONC WALL

SKIM COAT PLASTER

PAINT ON

PVCT

LOCKER ROOM

READY / WAITING /

100THK GLASS FIBER

INSULATION(30KG/m)

,4

ACST ACSTACST

1A

1C1B

A-12

1D

VCB

PVCT

VCB

PVCT

LOCKER ROOM

READY / WAITING /

100THK GLASS FIBER

INSULATION(30KG/m)

@ 400 O.C.(MAX)

150 MET STUD

15THK GWB ON

PAINT ON

,4

ACSTACST

1D

OFFICE

1E

A-12

ON 12 THK

PAINT

ON 12 THK

PAINT

W/GWB CEILING W/GWB CEILING

,4

(TYP)

200MM MTL STUD @ 300 O.C

ON 12THK CEMENT BOARD W/

ON PLASTERING W/MTL LATH

ON WATERPROOFING MEMBRANE

GCWT ON CEMENT BOND COAT

1E

1D

A-12

,4

MUD ROOM

LAB

SEE STRUC DWG

CONC WALL & FOOTING

,1

& CEILING

ON CONC WALL

SKIM COAT PLASTER

PAINT ON

1F

,4

SHOWER

M.TOILET/

ON 12 THK

PAINT

W/GWB CEILING

ON CONC SLAB (TYP)

ON CEMENT MORTAR BED

ON WATERPROOFING MEMBRANE

FCT ON CEMENT BOND COAT

(TYP)

200MM MTL STUD @ 300 O.C

ON 12THK CEMENT BOARD W/

ON PLASTERING W/MTL LATH

ON WATERPROOFING MEMBRANE

GCWT ON CEMENT BOND COAT

ROOM

MECH/ELEC

EPOXY

INTERIOR WALL SECTION

15THK GWB

PAINT ON

EPOXY EPOXY

@ 400 O.C.(MAX)

ON 150 MET STUD

PAINT ON 15T GWB

@ 400 O.C.(MAX)

ON 150 MET STUD

PAINT ON 15T GWB

W/ INSUL ON VR

(TYP)

STANDING SEAM

METAL ROOFING W/ INSUL ON VR

(TYP)

STANDING SEAM

METAL ROOFING

S S

DN

DN

FEC

CONTAINMENT FL

SECONDARY

FEC

FEC

A-13

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

WORKING POINT

EAVE F

LASHIN

G

CONC BEAM

TOP OF

INSUL ON

VAPOR RETARDER

TRIM

(TYP)

MASTIC

AXIS

BLOCKING NAILER

P.M CAP FLASHIG

P.M BASE FLASHING

50x150 TREATED WOOD

100 FLANGE (ALL AROUND)

18 GA GALV MET CURB W/

P.M FLASHING

W/CRICKET

OUTLINE OF

(SEE MECH DWG)

MECH EQUIPMENT

MET F

LASHIN

G

SEALANT

SEALANT

CURB OPENING

M

IN

STANDING SEAM

METAL ROOFING

W/INSUL ON VR

PROTECTED METAL

EAVE FLASHING

(TYP)

G1 WIRE BASKET

STRINGER @ EACH

DOWNSPOUT (TYP)

PROTECTED

METAL FASCIA ON

GALV METAL

C-100x50x20x3.2

@ 1200 OC (MAX)

ON INSUL & VR

SEALANT W/

BACK-UP ROD

EXT INSUL &

FNSH SYSTEM

PROTECTED METAL

DOWNSPOUT

PROTECTED MET

SOFFIT ON GALV MET

C-200X75X25X3.2

@ 1200 OC (MAX)

W/ INSUL ON VR

PROTECTED MET

STRAP HANGER

@ 900 OC

25X3 THK

BRACKET HANGER

@ 900 OC

W.P

(MIN

ZEE TRIM

W/ SEALANT

STL CHANNEL

FRAMING

(SAME SIZE AS STL

PURLIN)

RIGID INSULATION

(ALL AROUND

OUTSIDE OF CURB)

PROTECTED METAL

RAKE FLASHING

STANDING SEAM

METAL ROOFING

W/INSUL ON VR

PROTECTED

METAL TRIM

PROTECTED MET

WATER DRIP

PROTECTED

METAL FASCIA

ON GALV MET

ON INSUL & VR

PROTECTED METAL SOFFIT

C-200X75X25X3.2 ON GALV

MET @ 1200 OC (MAX)

W/ INSUL ON VR

EXT INSUL &

FNSH SYSTEM

SEALANT W/

BACK-UP ROD

100 THK TREATED

WOOD NAILER

W/ 12 DIA EXP BOLT

@ 1200 OC (MAX)-TYP

HOOK OVER

ZEE TRIM &

RIVET TO ZEE

CLOSURE

W/ SEALANT

PROTECTED MET

CAP FLASHING

T

EAVE DETAIL1A

METAL CURB DETAIL

RIDGE DETAIL1E

EAVE DETAIL1C

SCALE:

ROOF DETAILS

1/10

LINING PANEL

PROTECTED METAL

LINING PANEL

PROTECTED METAL

LINING PANEL

PROTECTED METAL

PROTECTED METAL ROOF

SELF DRILLING FASTENERS

FLEXIBLE

ALUMINUM BASE

M

IN

PIPE FLASHING

EDPM

STANDING SEAM

METAL ROOFING

W/ INSUL ON VR

(TYP)

PIPE FOR ANTENA

1D

FOR ANTENA DETAIL

PIPE THRU ROOF

1B

ARCHITECTURAL

ROOF DETAILS

CEILING LINE

PULL @ EACH DOOR

(B02011) 10 DIA POLISHED

20x100

(TYP)

WD SHIM

PLASTIC LAMINATE (PL-1)

(TOP,BOTTOM, & EDGE)

ON 18 THK PLYWOOD

REF (GFGI)

7.5 THK PLYWOOD (FRONT)

PLASTIC LAMINATE (PL-2)

BRASS ROD

50x100 WD FRAME (TYP)

PLASTIC LAMINATE (PL-1)

ON 18 THK PLYWOOD (FRONT)

ON METAL STUD WALL

ON 12 THK CEMENT BD

GCWT ON THINSET MORTAR

ON 12 THK CEMENT BD

5C

5B 5D

5A

L-50x50x6x50LG STL

PLASTIC LAMINATED (PL-2)

ON 18 THK PLYWD(TOP)

ON 7.5 THK PLYWD

PLASTIC LAMINATED (PL-2)

EXP BOLT @ 450 OC

FIXED TO WD BLOCK &

TO CONC SLAB W/6 DIA

50x100 WD

BLOCK

SILICONE SEALANT

30x50 HARDWD

18X18 HARDWD TRIM

W/ PLASTIC LAMINATED

POST-FORMED 13 THK

ON 18 THK PLYWOOD

MARINE EDGE

(FRONT, BACK & EDGE)

PLASTIC LAMINATED

ON 18 THK PLYWD

SOLID SURFACING (SSM-1)

DRAWER STOPPER

20x40 HARD WD

W/ PLASTIC

LAMINATED

(TOP)

ON 7.5 THK PLYWD

PLASTIC LAMINATED (PL-2)

50x100 WD BLOCK

WD BLOCK & TO

CONC SLAB W/

6DIA EXP BOLTS

@ 450 OC

L-50x50x6x50LG STL

CLIP FIXED TO

18 x 18

VCB

PLASTIC

PLYWD

& EDGE)

ON 7.5 THK PLYWOOD

ON 18 THK PLYWOOD

POST-FORMED 13 THK

SOLID SURFACING (SSM-1) MATERIAL

(FRONT)

HARDWD TRIM

ON 18 THK

LAMINATED (PL-1)

(FRONT, BACK

W/ PLASTIC

LAMINATED (PL-1)

(TOP & EDGE)

MATERIAL

(PL-1)

A-14

A

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

ARCHITECTURAL

SCALE: 1:10

SCALE: 1:10

UPPER CABINET DETAIL

SCALE: 1:5

D E T A I L S

PLASTIC LAMINATED (PL-2)

GCWT ON CEMENT BOND COAT

CABINET DETAILS

C

T

C

T

50x100

TREATED WD

FRAME

PLASTIC LAMINATED (PL-1) ON

18 THK PLYWOOD (FRONT)

MICROWAVE(GFGI)

(VERIFY SIZE)

PLASTIC LAMINATED (PL-1)

ON 18 THK PLYWOOD

(TOP, EDGE & BOTTOM)

20x100

TREATED

WD SHIM

ON METAL STUD @ 400 OC (MAX)

PLASTIC LAMINATED (PL-2)

INTERIOR 18 THK PLYWOOD

(TOP & EDGE)

PLASTIC LAMINATED (PL-2)

INTERIOR ON 7.5 THK PLYWOOD

(FRONT)

PLASTIC LAMINATED (PL-1) ON 18

THK PLYWOOD (FRONT & EDGE)

W/ HINGE (2PR-BO1602)

W/ (@ EACH DOOR)

PULL @ EACH DOOR (B02011)

10 DIA POLISHED BRASS ROD

MARINE EDGE

13 THK SOLID SURFACE (SSM-1)

MATERIAL OVER 18 THK PLYWOOD

(COUNTERTOP, BACK & SIDE

SPLASH GUARD)

METAL

ADJUSTABLE

PLASTIC LAMINATED

INTERIOR

ON 18 THK PLYWOOD

(TOP,BOTTOM & EDGE)

25X50 WD

SEALANT

PLASTIC LAMINATED (PL-1)

N 18 THK PLYWD (FRONT & EDGE

W/ HINGES 2PR - B01602 @ EACH DOOR)

PLASTIC LAMINATED (PL-2)

INTERIOR ON 18 THK PLYWD (BOTTOM & EDGE)

PLASTIC LAMINATED (PL-2)

INTERIOR ON 18 THK PLYWOOD

(TOP,BOTTOM & EDGE)

PLASTIC LAMINATED (PL-2)

INTERIOR ON 7.5 THK PLYWOOD (FRONT)

MET ADJ SHELF HARDWARES

(B04071 & B04081)

PULL @ EACH DOOR (B02011)

10 DIA POLISHED BRASS ROD

PLASTIC LAMINATED (PL-1)

ON 18 THK PLYWOOD

(BOTTOM)

20x100

TREATED

WD SHIM

13 THK SOLID SURFACE (SSM-1)

MATERIAL OVER 18 THK

PLYWOOD (COUNTERTOP, BACK &

SIDE SPLASH GUARD)

MARINE EDGE

KITCHEN SINK (UNDER HUNG TYPE)

(SEE MECH DWG)

PLASTIC LAMINATED (PL-2)

INTERIOR 18 THK PLYWOOD

(TOP & EDGE)

PLASTIC LAMINATED (PL-2)

INTERIOR ON 7.5 THK PLYWOOD(FRONT)

PLASTIC LAMINATED (PL-1)

ON 18 THK PLYWOOD (FRONT & EDGE)

W/ HINGE (2PR-BO1602 @ EACH DOOR)

PULL @ EACH DOOR (B02011)

10 DIA POLISHED BRASS ROD

SEALANT

25X50 WD

PLASTIC LAMINATED (PL-2)

INTERIOR ON 18 THK PLYWOOD

(TOP,BOTTOM & EDGE)

PULL @ EACH DOOR (B02011)

10 DIA POLISHED BRASS ROD

50x100

TREATED WD

FRAME

CEILING LINE

CEILING LINE

@ 400 OC (MAX)

GWB (WATERPROOF) ON METAL STUD

GCWT W/CEMENT BOND COAT ON 15THK

@ 400 OC (MAX)

GWB (WATERPROOF) ON METAL STUD

GCWT W/CEMENT BOND COAT ON 15THK

1/10

SCALE:

CABINET DETAIL

5C

A-14

5D

A-14

5A

5B

5D

1/10

SCALE:

CABINET DETAIL

BOLTS @600 OC

X50 LG W/ 12DIA EXP

CONTINUOUS TREATED

50X100 WD & 50X50X6

C

T

(TYP)

(PL-1).

PLYWD PANEL W/ PLASTIC LAMINATE

CONSTRUCTED OF SOLID WD TRIMS &

END PANEL AND ETC. SHALL BE

INCLUDING DOOR, DRAWER FRONTS, SIDE

ALL EXPOSED COUNTER CABINET FACES

5.

6.

(PL-2).

FINISHED W/ PLASTIC LAMINATE

ALL CABINET INSIDE SURFACE SHALL BE

7.

FOR THE SOUND SILENCE.

EQUIPPED WITH RUBBER BUMPER

ALL CABINET DOORS SHALL BE AND TO BE INSTALLED BY OTHER.

GOVERNMENT FURNISHED MATERIALS

MICROWAVE,RANGE AND REFRIGERATOR WILL BE 1.

2.

3.

4.

FINISHED W/ SOLID SURFACE MATERIAL (SSM-1).

ALL CABINET COUNTERTOP SHALL BE

8.

SOLID SURFACE MATERIALS FOR APPROVAL.

OF HARDWARE, PLYWOOD, PLASTIC LAMINATE &

AND TEST REPORTS, CERTIFICATIONS

OF KITCHEN CABINETS WITH HARDWARE,

CONTRACTOR SHALL SUBMIT SHOP DRAWING

TWO (2) INCHES ACTURAL SIZE OF THE REF.)

JOB SITE, (REFRIGERATOR SPACE SHALL BE

AND CABINET SIZE SHALL BE ADJUSTED ON THE

REFRIGERATOR DIMENSION IS APPROXIMATE

BY USING AGENCY.

PLASTIC LAMINATED COLOR SHALL BE SELECTED

CABINET NOTE

SSM-1

OR APPROVED EQUAL

MELATON, 1157EA

PLASTIC LAMINATED SHEET

OR APPROVED EQUAL

MELATON, 3357EA

PLASTIC LAMINATED SHEET

PL-1

PL-2

OR APPROVED EQUAL

CRYSTAL PACIFIC, #NP932

LOTTE STARON MFG,

SOLID SURFACE MATERIAL

PLYWOOD

SIDE SPLASH)

MARINE EDGE

ON 18 THK

(2PR-B05011

@ EACH DOOR)

VCB

PLYWOOD (TOP & EDGE)

(COUNTERTOP, BACK &

13 THK SOLID SURFACE

ON 18 THK PLYWOOD

METAL PULL (B02011)

DRAWER W/ SLIDE

PLASTIC LAMINATE (PL-1)

5D

5A

5C

5B

PLASTIC LAMINATE (PL-2)

MATERIAL (SSM-1) OVER 18 THK

5E

LOWER CABINET DETAIL

A-14

A-14

A-14

A-14

A-14

A-14

A-14

A-14

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

GCWT FINISH WALL

C

T

25 THK WD

3A

3B

1/5

CWT FINISH

WOOD SHIM

ELEVATION

SCALE : NONE

WALL OVERALL SIZE

SECTION

SCALE:

W/MFR PER SPEC

NOTE

VERIFY DIMENSION

DRY WALL

6 DIA MET SCREW

(3-PER SIDE)

(ALL AROUND)

SCALE:

AS SHOW

2A 2B

2B

SCALE :

MIRROR DETAILS

1/2

SLAB

ON CONC

MORTAR BED

CEMENT

FT ON

PLYWD

MIRROR ON 7.5 THK

(SEE ELEC DWG)

LIGHTING FIXTURE

(MAX)-TYP

600 OC

TOGGLE BOLT @

3EA-18 DIA

DWG)

H/C (SEE MECH

LAVATORY FOR

STUD

ANCHOR TO MET

STL PLATE

550x(L)x6 THK

PAPER TOWEL DISPENSER W/RECEPTACLE DETAILS

3A

3B

6 THK MIRROR ON

7.5 THK PLYWOOD

W/ GLUE

12 THK CEMENT

BOARD

SST FRAME

SEALANT

6 THK MIRROR ON

7.5 THK PLYWOOD

W/ GLUE

12 THK CEMENT

BOARD

SST FRAME

SEALANT

POST-FORMED

13 THK SOLID

SURFACING

MATERIAL

SCALE: 1/10

LAVATORY COUNTER DETAIL

205 275 150

OVER 18 THK

TOP & SPLASH BACK

MATERIAL COUNTER

SOLID SURFACING

POST-FORMED 13 THK

1/5SCALE:

SST SHELF BRACKET

MOP HOLDER

HOOK

SST HOOK

@ 215 OC FOR TOP SHELF

W/2-6 DIA TOGGLE BOLTS

2-16 GA SST SHELF BRACKET

SST MOP HOLDER

18 GA SST SHELF

METHODS OF WALL

FASTENING

SCALE: 1/5

@ 215 OC FOR TOP SHELF

4B

@ 1200 OC

DRYING ROD

DRYING ROD

SCALE : 1/5

MOP RACK DETAILS

4A

4B

ELEVATION

SECTION

300215

75 215

182.5

VAR

THK PLY WOOD

PLASTIC ON 12

REMOVABLE PANEL

(TYP)

SST TUBE FRAME

-50x50x6

A-15

ARCHITECTURAL

MISC DETAILS - 1

GCWT FINISH WALL

WALL

GCWT FINISH

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

A-16

ARCHITECTURAL

MISC DETAILS - 2

VARI

ES

(S

EE I

NTE

RI

OR

ELE

VATIO

N)

GRAB BAR

32 DIA SST

GRAB BAR ISOMETRIC

NOT TO SCALE

62 C

LE

A R

SCALE :

STUD WALL MOUNTING

SCALE:

GRAB BAR DETAILS

AS SHOW

3A 3B

1/2 SCALE :

TOILET PANEL MOUNTING

3C

1/2

TO METAL STUD

METAL STUD

6 THK GALV STL

PLATE ANCHOR

CWT WALL FINISH

12 THK CEMENT BOARD

32 DIA SST GRAB BAR

SST GRAB BAR FLANGE

6 x 25 OVAL HEAD

SST BOLT

SST CONNECTOR

SPACER THREADED

SST GRAB BAR FLANGE

SST PILASTER

THREADED

32 DIA SST GRAB BAR

SST CONNECTOR SPACER

OVAL HEAD SST

MACHINE SCREW

SST BACK

PLATE

IN

S

ID

B

X

D

IM

PULL (TYP)

SIDE)-TYP

METAL DOOR

6 DIA METAL

SCREW (3-PER

SCHEDULE

SCHEDULE

FINISH PER

FLAT TRIM

FINISH PER

(ALL AROUND)

WOOD SHIM

V

E R

IF

Y

(OUTSIDE TRIM DIM)

(INSIDE BOX DIM) W/ METAL LATH

FLAT TRIM

CONC FILL

IN

S

WOOD SHIM

(ALL AROUND)

DOOR PULL

CASING BEAD

(ROUGH OPENING)

1C 1B

(TYP)

METAL

DOOR PULL

TEMPERED SAFETY

METAL TRIM

L

F I R E

E X T I N G U I S H E R

GLASS

W/ METAL LATH

CONC FILL

(INSIDE BOX DIM)

30 30

45300

(INSIDE BOX DIM)

0 (

IN

S

(OUTSIDE TRIM DIM)

0 ( O

U T S

PAINT SCP

PLAN

SECTION "A-A"ELEVATION

EXTINGUISHER CABINET

METAL DOOR PULL

(OUTSIDE TRIM DIM)

O

U T S

METAL TRIM

GLASS

METAL FIRE

(ALL AROUND)

WOOD SHIM

METAL DOOR

PULL

(OUTSIDE TRIM DIM)

METAL DOOR

PULL

(ALL AROUND)

WOOD SHIM

A

A

SCREW (3-PER SIDE)

PAINT ON SCP

SCALE:

1/10

FIRE EXTINGUISHER CABINET DETAILS - 1

1C 1B

ELEVATION

A-A SECTION

1A

PLAN

1A

1B 1C

(INSIDE BOX DIM)

(ROUGH OPENING)

30030 30

SCALE: N/A

FIRE EXTINGUISHER CABINET DETAILS - 2

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

A-17

ARCHITECTURAL

MISC DETAILS - 3

SCALE:

4 1/10

CONC SPLASH BLOCK DETAIL

DOWNSPOUT

PROTECTED MET

GUTTER EXPANSION DETAILS

FRAME

1G

TO INSURE BOARD EDGES ARE TIGHTLY BUTTED.

STANDARD BOARD THICKNESSES 18, 25, 35 & 50 STANDARD

FACTORY EDGES AT CORNERS, OPENING, GRADE LINE ETC.

BOARD SIZES 600x1200, 600x2400 & 1200x2400 USE

NOTES :

1.

INSULATION BOARD

& BONDING AGENT

MECHANICAL FASTENERS

SPRAY COLOR SEALER

BASE COAT

FINISH COAT

1BNOTE

REINFORCING MESH FABRIC

OPEN WEAVE GLASS FIBER

INSTALLATION OF INSULATION & FINISH SYSTEM

APPLIED AT 45 ANGLE

OF FIBERGLASS MESH

USE 150x300 STRIPS

OPENING REINFORCEMENT

AESTHETIC JOINT

INSU. BOARD LAYOUT

GROOVE

1C

V-CUT AESTHETIC

OPENING

1F

1J

REINFORCEMENT

CORNER

1E CORNER DETAIL

SEALANT

JAMB CONDITION

HEAD / JAMB1D

DOOR OR WINDOW

CORNER DETAIL

METAL MESH

EXPANDED

CONTROL JOINT

METAL MESH

EXPANDED

LANDING

STAIR

SEALANT

JAMB CONDITION

SILL

1H

1K

CONTROL JOINT WITH BACKSTOP & SEALANT.

INSTALLED IN LINE WITH INSULATION & PLASTER FINISH

EXTERIOR CONC WALL CONTROL JOINTS SHALL BE 2.

CONC WALL

1.CORNERS ARE TO BE

FACTORY CUT EDGES

& NO FIELD CUTS

ON EXPOSED EDGES

WILL BE PERMITTED

AND THERE IS TO BE

NO GAP BETWEEN BOARDS

NOTE :

2.INSULATION BOARD SHALL

STAGGERED AT VERTICAL JOINT

AND INTERLOCKED AT CORNER.

W/ DRAINAGE SYSTEM.

1A

SCALE:

SCALE:

1/5

DOWNSPOUT DETAILS

METAL SCREEN

REMOVABLE

THE GUTTER & TO MEET AT/FP REQUIREMENTS.

3. TO PREVENT LEAVES FROM COLLECTING IN

2. INSTALL REMOVABLE METAL SCREEN

AT ALL GUTTERS.

SHOULD NOT BE EXCEEDED MAX 12,000mm.

1. DISTANCE BETWEEN GUTTER EXPANSION JOINTS

*NOTE

STANDING SEAM

ROOFING

SOLDER

RIVET &

GUTTER

CONTINUOUS

CLEAT

SLOPE

1/16 PER FT

SECTION A-A

1/16 PER FT

SLOPE

A

A

SLOPE

MET

GUTTER

ENDS

GUTTER LAP

THAN BACK (MIN)

FRONT 12 LOWER

SEALANT W/

BACKING ROD

3 THK X 50 W

SST STRAP

@ 900 OC

(TYP)

9 DIA EXP BOLT

75 W X 150 H X 5 THK

SST PLATE (TYP)

EXT INSUL &

FNSH SYSTEM

PROTECTED

METAL DS

(150 x 100) 6 DIAx80 RUST

PROOF CAP

SCREW & NUT

W/WASHER (TYP) 1.5 THK X 50 W

PROTECTED METAL

DS STRAP HANGER

@ 900 OC (MAX)

SCALE: N/A

TYPICAL EIFS DETAILS

N/A

URINAL SCREEN DETAILS

AS SHOWNSCALE:

D E T A I L

SCALE : 1/2

P L A N

SCALE : 1/20

E L E V A T I O N

SCALE : 1/20

WALL FASTENING

& SEX NUT

SHOULDER SCREW

BRACKET

AS REQ'D

SST PILASTER

3A

3B 3C

3B

A

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

A-18

ARCHITECTURAL

MISC DETAILS - 4

SEALANT

BASE FLASHING

PROTECTED MET

PROTECTED

METAL

"Z" CLOSURE

EIFS ON 12 THK

CEMENT BOARD

ON C-100x50x20x2.3

STL CHANNEL

@ 400 OC

100 THK TREATED

WD NAILER

80x80x7.0THK STEEL

ANGLE FRAME

@ 850 OC

METAL STRAP HANGER

@ 900 OC (MAX)

(RIVET TO GUTTER EDGE)

PROTECTED MET GUTTER

25 W x 3 THK

BRACKET HANGER @

900 OC(MAX)

(STAGGERED W/

STRAP HANGERS)

C-100x50x20x2.3

W.P

15THK STL PLATE

EIFS

1/10SCALE:

25 150

EAVE FL

ASHING

1,400

METAL CANOPY DETAIL

PROTECTED METAL

ROOFING CANOPY

PROTECTED MET SOFFIT

SCALE:

SHOWER CURB DETAIL

1 : 5

BATH ROOM

R=5

SEALANT

SHOWER AREA

SHOWER CURTAIN

SLOPE SLOPE

SHOWER CURTAIN

W/ROD

FABRIC REINF

EXST CONC OR BRICK CURB

MEMBRANE

WATER PROOFING

CEMENT MORTAR

BED

CERAMIC FLOOR

TILE

MEMBRANE

WATER PROOFING

CEMENT MORTAR

BED

CERAMIC FLOOR

TILE

SHOWER CURTAIN

W/ROD

W/ADHESIVE

12 THK SSM

L

5B 5A

SECTIONP L A N

6 THK CEMENT BOARD

6 THK CEMENT BOARD

PORCELAIN SOAP HOLDER

MORTAR BED

CERAMIC TILE

SOAP HOLDER

PORCELAIN

SCALE: 1:10

SOAP HOLDER DETAILS

GCWT ON

CEMENT BOND COAT

ON WATERPROOFING

MEMBRANE ON

PLASTERING W/METAL LATH

GCWT ON

CEMENT BOND COAT

ON WATERPROOFING

MEMBRANE ON

PLASTERING W/METAL LATH

SCALE:

TOWEL BAR DETAILS

O O

R

FLANGE

TOWEL BAR

TOWEL BAR

,3

CONC WALL

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

A-19

ARCHITECTURAL

BAR @ 100 O.C

5x5 THK CROSS

AHR ROD @ 600

BAR @ 15 O.C

25x5 THK BEARNG

150 150

6THK x 50 SST

MOLTEN LEAD

2.0 THK SST PLATE

SST COLLAR

BOOT SCRAPER

WELD TO SLEEVE

SST SLEEVE

SST HANDRAIL

280.5 300 300 280.5

"A"

"A"

300 3001

M

IN

M

X

SCALE: 1/5

BOOT SCRAPER DETAIL

1/5

ELEVATION

SCALE : NONE

SCALE:

1A

1B

1/5SCALE:

1C

D E T A I L

SECTION "A"-"A"

1B

SCALE: 1/10

TRENCH DETAIL

MISC DETAILS - 5

D13-7EA

D13 @ 300 O.C

400 or 650

±700 or 950

SEE STRUC DWG

CONC SLAB

*NOTE*

SCALE: 1/5

1.5 THK SST TRENCH BODY

SST TRENCH DETAIL

1000L X 400W X 44H, 50X50X4 ANGLE

EPOXY ON CONC

±400

SEE STRUC DWG

CONC SLAB

3 THK SST GRATING TRENCH COVER

3 THK SST GRATING TRENCH COVER

2.

CONNECTION DETAIL TO SHOP DRAWING FOR REVIEW AND APPROVAL.

PRIOR TO INSTALL NEW TRENCH DRAINS, CONTRACTOR SHALL SUBMIT THE DRAIN PIPE

1.

SCALE: N/A

SAMPLE PICS OF SST TRENCH

SST TRENCH: WWW.NAMJITRENCH.COM OR APPROVED EQUAL.3.

CONTRACTING OFFICER BEFORE FABRICATION AND INSTALLATION.

SST TRENCH COVER, ANCHOR BOLT, ACCESSARIES & ETC FOR APPROVAL BY THE

THE CONTRACTOR SHALL PREPARE SHOP DRAWINGS FOR ACTUAL SST TRENCH BODY,

10±40010

25±35025

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

1.

WITH THE CAMP CASEY EXTERIOR COLOR SCHEME AS APPROVED BY THE COR.

SELECTION OF EXTERIOR PAINT AND FACTORY APPLIED COLORS SHALL BE IN ACCORDANCE

MANUFACTURERS STANDARD MUST APPROACH.

COLOR IS NOT REQUIRED. THE SELECTIONS SERVE ONLY TO INDICATE THE COLOR WHICH THE

INTENDED TO LIMIT SELECTIONS OF PRODUCTS. AN EXACT MATCH OF THE MANUFACTURERS

MANUFACTURERS' COLORS LISTED ARE FOR IDENTIFICATION PURPOSES ONLY AND ARE NOT 2.

3.

ROOM NAMESROOM NOS

INTERIOR FINISH SCHEDULE

FLOOR BASE WALLS CEILING

REMARKS

FINISH COLOR FINISH COLOR FINISH COLOR FINISH COLOR HEIGHT

SURFACE

ROOFING

FLASHING

FASCIA

SOFFIT

DOOR & FRAME

HANDRAIL

MATERIAL

STEEL

STEEL PIPE

COLOR

CHOCOLATE

COLOR NO.

20095

CHOCOLATE

CHOCOLATE

CHOCOLATE

CHOCOLATE

CHOCOLATE

20095

20095

20095

20095

20095

REMARKS

WALL EIFS

WALL CMU

BEAM/COL CONC

CONC

SAND-STONE

SAND-STONE

SAND-STONE

SAND-STONE

23617

23617

23617

23617

PROTECTED METAL

EXTERIOR COLOR SCHEDULE-1

FS 595B

FS 595B

FS 595B

FS 595B

FS 595B

FS 595B

FS 595B

FS 595B

FS 595B

FS 595B

MAT'L

EXST

MAT'L

NEW

MAT'L

EXST

MAT'L

NEW

MAT'L

EXST

MAT'L

NEW

MAT'L

NEW

MAT'L

EXST

USER AGENCY.

SELECTION OF INTERIOR PAINT AND FACTORY APPLIED COLORS SHALL BE APPROVED BY

SHALL BE WATERPROOF TYPE GWB.GWB FOR TOILETS, AND OTHER WET AREAS 4.

F.F.

ACST 2450

PAINT PT-1

FINISH SCHEDULE NOTES

STAIR WALLS

PROTECTED METAL

PROTECTED METAL

PROTECTED METAL

VCT ACST F.F. ACST-1VCB

ACST 2450PAINT PT-1VCT ACST F.F. ACST-1VCB

VCT GCWT

VCT GCWT

VCT GCWT

QT QT-1

F.F.

F.F.

A-20

ARCHITECTURAL

& FINISH SCHEDULE NOTES

INTERIOR, EXTERIOR FINISH SCHEDULE

VEST

JANITOR

PVCT

PVCT PVCT-1

PVCT-1

F.F.FCT FCT-1

F.F.FCT FCT-1

F.F.FCT FCT-1

F.F. GCWT-1GCWT GWB 2450GWB* PAINT PT-2

F.F. GCWT-1GCWT GWB 2450GWB* PAINT PT-2

F.F. GCWT-1GCWT GWB 2450GWB* PAINT PT-2 GWB* : WATERPROOF TYPE

VCB F.F. VCB-1

VCB F.F. VCB-1

VCT

STORAGE

3150EPOXY COATING EP-1 VCB F.F. VCB-1VCB-

GWB GWB

W.TOILET/SHOWER

M.TOILET/SHOWER

GWB* : FIRE RESISTANT TYPE

GWB* : WATERPROOF TYPE

PAINT PT-1GWBQTB F.F. QTB-1 PAINT PT-2

OFFICE GWB GWB

CONFERENCE RM103

VCB

GWB GWB

CMU -- - GWBCONC* CONC* CONC* : SCP ON CONC WALL & CEILING107

108 3150EPOXY COATING EP-1 VCB F.F. VCB-1VCB GWB GWBCONC* CONC* CONC* : SCP ON CONC WALL & CEILINGCOMM ROOM PAINT PT-1 PAINT PT-2

VCT

3150VCB F.F. VCB-1VCB GWB GWBCONC* CONC* CONC* : SCP ON CONC WALL & CEILINGPAINT PT-1 PAINT PT-2VCT

111 MUD ROOM

VCT F.F. - - - - F.F. GCWT-1GCWT GWB 2450GWB* PAINT PT-2 GWB* : WATERPROOF TYPE

F.F.PVCT PVCT-1

MECH/ELEC ROOM

EYE WASHER RM

EPOXY EP-1

LAB

LOCKER ROOM

READY/WAITING/

GWB

GWB

VCT F.F.EPOXY EP-1 - - - -

VCT F.F.EPOXY EP-1 - - - -

F.F. GCWT-1GCWT GWB 2450GWB* PAINT PT-2 GWB* : WATERPROOF TYPEGWB

F.F. GCWT-1GCWT GWB 2450GWB* PAINT PT-2GWB

ACST 2450VCT ACST F.F. ACST-1VCBF.F.PVCT PVCT-1 VCB F.F. VCB-1 GWB GWB/GCWT PAINT/F.F.

GCWT-2*

PT-1/ GCWT-2* : KITCHEN CABINET WALL ONLY

GWB* : FIRE RESISTANT TYPE

F.F. 2600QT QT-1VEST VCT GWB GWBPAINT PT-1GWBQTB F.F. QTB-1 PAINT PT-2VCB GWB110

CORRIDOR116 F.F. ACST 2450PAINT PT-1GWBVCT VCB F.F. VCB-1 GWB ACST F.F. ACST-1PVCT PVCT-1 VCB

ACST 2450PAINT PT-1VCT ACST F.F. ACST-1VCBF.F.PVCT PVCT-1 VCB F.F. VCB-1OFFICE GWB GWB115

A-21

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

BASE MATERIAL/COLOR

M A T E R I A L & C O L O R S C H E D U L E

HANKOOK BLIND

MB-1

K-2, 25MM

VENETIAN ALUMINUM

OR APPROVED EQUAL

TP-1

STAINLESS STEEL,

SATINE FINISH

OR APPROVED EQUAL

FLOOR MATERIAL/COLOR

PVCT-1

FCT-1

OR APPROVED EQUAL

NON-SLIP, 300 x 300 x 8 THK

GGI 2984 OA, NON GLOSS

DONGSEO, INUS

FLOOR CERAMIC TILE

CEILING MATERIAL/COLOR

VCB-1

PT-2

EP-1

ABRASIVE GRAIN FINISH

OR APPROVED EQUAL

OR APPROVED EQUAL

DARK BROWN, 100 HGT, 3THK

LG HAUSYS

VINYL COVE BASE

CLEANPOXY 3100

NOROO PAINT & CO

EPOXY PAINT

WALL MATERIAL/COLOR

GCWT-1

: MOLD & MILDEW RESISTANT, STAIN PROOF

ANTIQUE WHITE

OR APPROVED EQUAL

* EPOXY GROUT COLOR FOR GCWT AND FT

OR APPROVED EQUAL

300 x 600 x 10 THK

FIELD TILE, DQL 2016 OA, GLOSS

DONGSEO, INUS

GLAZED CERAMIC WALL TILE

ACST-1

BB-1

MISC MATERIAL/COLOR

MINI BLIND

TOILET PARTITION & URINAL SCREEN

PS-1

OR APPROVED EQUAL

3048(W) X 2134(H)

W/PROJECTOR BRACKET

DRAPER, ENVOY, ELEC OPERATION

PROJECTION SCREEN FOR CONFERENCE ROOM

ACOUSTICAL TILE

ALUMINUM

ACOUSTICAL WALL PANEL

CEILING

COLOR

CONCRETE MASONRY UNIT

CONCRETE

COMMUNICATION

CARPET

CERAMIC WALL TILE

EXTERIOR INSULATION &

FINISH SYSTEM

ELECTRICAL

EXISTING

FLOOR TILE

FINISH

GYPSUM WALL BOARD

HEIGHT

MEN

MATERIAL

MECHANICAL

PAINT

REPAIR BY REPLACING

SKIM COAT PLASTER

VARIOUS

VINYL COVE BASE

VINYL COMPOSITION TILE

VINYL SHEET FLOORING

WOMEN

WOOD BASE

WOOD

ACST

AL

AWP

CLG

CLR

CMU

CONC

COMM

CPT

CWT

EIFS

ELEC

EXST

FT

FNSH

GWB

HGT

M

MATL

MECH

RBR

SCP

VAR

VCB

VCT

VSF

W

WB WD

A B B R E V I A T I O N

PT

ARCHITECTURAL

MATERIAL & COLOR SCHEDULE

PM-1

OR APPROVED EQUAL

PROJECTOR UNIVERSAL MOUNT

QT-1

QUARRY TEXTURES

#OT05, ADOBE BROWN

OR APPROVED EQUAL

QUARRY TILE BASE

DAL TILE

PT-1

SCP

QT-1 QUARRY TILE

QUARRY TEXTURES

#OT05, ADOBE BROWN

OR APPROVED EQUAL

DAL TILE, 152X152X12THK

OR APPROVED EQUAL

MARBLE, 457.2MMx457.2MM, 3MM THK

KCC SENSE TILE, CERAMIC, TS 55169,

PVC TILE

WD

PRL

LINER PANEL

PROTECTED METAL ROOF

OR APPROVED EQUAL

LATEX

EX8816-SNOWWHITE

ANTI-MOLD & MILDEW

KCC SUPRO HOME & WELLBEING

PAINT COLOR

OR APPROVED EQUAL

MT 410, WHITE

"KCC MITONE"

603MM x 603MM x 15MM THK

ACOUSTICAL CEILING TILE

OR APPROVED EQUAL

EX8816-IVORY

KCC SUPRO HOME AND WELLBEING

LATEX, INTERIOR

ANTI-MOLD AND MILDEW

PAINT

LK-1 LOCKER

IDES I & F INC. www.ides.co.kr

600W x 750D x 1800H x 100H base, HARDWARE / 1-COAT ROD, 2-COAT HOOK

LOCKER DOORS; 18THK ANSI 208.2 GRADE

MDF CORE WITH BLACK GLOSSY

PLASTIC LAMINATE FINISH,

MELATONE #7554E

LOCKER BOX ; 18THK ANSI 208.1 GRADE

PARTICLEBOARD CORE WITH BLACK

MELAMINE FINISH (COLOR : WHITE BEIGE)

& LOCK SET W/ RECESS HANDLE

OR APPROVED EQUAL

TWO TIER LOCKER

TOP 3EA ROBE HOOKS AND BOTTOM SHLEVE

GCWT-2

OR APPROVED EQUAL

300 x 600 x 10 THK

SQA2071, GLOSS

DONGSEO, INUS

GLAZED CERAMIC WALL TILE

TV-1

OR APPROVED EQUAL

WALL TYPE

UNIVERSAL TV MOUNT

SSM-1

OR APPROVED EQUAL

MELATON, 1157EA

PLASTIC LAMINATED SHEET

OR APPROVED EQUAL

MELATON, 3357EA

PLASTIC LAMINATED SHEET

PL-1

PL-2

OR APPROVED EQUAL

CRYSTAL PACIFIC, #NP932

LOTTE STARON MFG,

SOLID SURFACE MATERIAL

OR APPROVED EQUAL

BASE COAT-2MM, FINISH COAT-1MM

SMOOTH FINISH

BOOLIM POWTEC, S-301, GRAY

SKIM COAT OF PLASTER

OR APPROVED EQUAL

SIZE - 1800(W) x 900(H)

W/ 50x50 WIDE NATURAL OAK FRAME, ON 9 THK FIBER BOARD

10 THK NATURAL CORK BOARD

(WWW.THE-MOON.CO.KR),

THE MOON CO

BULLETIN BOARD

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

REMARKS

DOOR DIMENSION

WIDTH

MATERIAL

D1 A

DOOR

TYPE

DOOR

NOS.

ROUGH OPENING

WIDTH HEIGHT

HDW

SET

THICKHEIGHT NO (HR)

RATED

FIRE

LOUVERGLAZING

CUT

UNDER

FRAME

D2

D3

D4

D

D5

B - -

D6

D7

D8

DOOR

2133900 - -1

STEEL 44.5 - -2

44.5 -7

DOOR / WINDOW / LOUVER SCHEDULE DOOR/ WINDOW / LOUVER ELEVATIONS

2133STEEL

2133900

STEEL

44.521331000 2200 900STEEL

W/ INSECT /BIRD SCREEN

AND FRAME

FIXED AL LOUVER (45° BLADES)

D9

AL AL -

AA

(THERMAL BREAK TYPE)

W/ INSULATED GLASS

FRAME

ANODIZED AL DOOR &

J

AL LOUVER

D11

D12

D13

B

1000 2200 900

& STL FRAME

STL DOOR

THERMAL INSULATED C

& STL FRAME

STL DOOR

THERMAL INSULATED

G

FACTORY FINISH

(OAK, NATURAL VARNISH)

& STL FRAME

WOOD SOLID CORE DOOR

G STEEL -102133WOOD --44.51000 2200 900

INSULATED AL BLAST SLIDING WINDOW

(ANODIZED DARK BRONZE)

W/INSECT SCREEN

(THERMAL BREAK TYPE)

-PEAK REFLECTED PRESSURE

: 40.6 KPA

-PEAK IMPULSE

: 210 KPA - MS

( SHGC : MAX 0.4 )

+ 6 THK TINTED LOW-E TEMPERED GLASS

+ 12 THK AIR SPACE

8.75 THK CLEAR LAMINATED GLASS

H

D10

D14

F

A-22

ARCHITECTURAL

AND DETAIL

DOOR / WINDOW SCHEDULE, ELEVATIONS

E -

D15

D16

12001800ALGLASSH - -------W1 VERIFY BY BLAST WINDOW MFR

E

J AL 400AL 500 - - - - - - - -L1

: 40.6 KPA

- PEAK IMPULSE

: 210 KPA-MS

PRESSURE

- PEAK REFLECTED

844.5213322001000 900

DOOR W/ METAL FRAME

METAL BLAST RESISTANT

THERMAL INSULATED

: 40.6 KPA

- PEAK IMPULSE

: 210 KPA-MS

PRESSURE

- PEAK REFLECTED

* SOUNDPROOF DOOR, STC-25

(2 EA)

P L A N

DOOR

S E C T I O N

STEEL TUBE

CONC STOOP

WELDED TO

STEEL PLATE

50 x 50 x 6THK

FOUNDATION

STEEL PLATE

STEEL TUBE

CONCRETE

170 x 170 x 6THK

WELDED TO

EYEBOLT

HOOK &

DOOR

HOOK & EYEBOLT

STEEL TUBE

CONC)

GALV STEEL

80x80x3.2 THK

50 x 50 x 6 THK STEEL

80x80x3.2 THK

WALL TYPE BUMPER L02101

GALV STEEL TUBE

(FILLED W/CONC)

PLATE WELDED TO

WALL TYPE BUMPER L02101

YELLOW STRIPS

BLACK BACKGROUND

TUBE (FILLED W/

1 DOOR STOP & HOLDER DETAILS

250X250

SCHEDULE

PANEL AS

GLASS VISION

C STEEL 44.5 - -3 -2133STEEL 1900 2200 1800 -

G 44.5 -9 -STEEL 21331000 2200 900 --

G 44.5STEEL 21331000 2200 900 - 19-

1)

LAMINATED GLASS

SCHEDULE

PANEL AS

GLASS VISION

LAMINATED GLASS

1)

1) INSULATION LAMINATED GLASS

& AL FRAME

W/ INSULATED BLAST GLASS

(THERMAL BREAK TYPE)

(ANODIZED DARK BRONZE)

ANODIZED AL BLAST DOOR

INSULATED BLAST GLASS

(OUTER PANE)

(SEE NOTE)

D O

O R S

IZ

E

B

1) VERIFY BY BLAST DOOR MFR

D

& STL FRAME

STL HOLLOW CORE DOOR

1000 2200

E - -5STEEL 44.521331000 2200 900STEEL -

B - -6STEEL 44.521331000 2200 900STEEL --

E - -5STEEL 44.521331000 2200 900STEEL -

AL AL 1) 1) -

STEELSTEEL

1)

WOOD

G STEEL -112133WOOD --44.51000 2200 900

1)

WOOD

G 44.5STEEL 2133900 2200 800 - 19- -13WOOD

F - -14STEEL 44.52133900 2200 800STEEL -

F - -14STEEL 44.521331000 2200 900STEEL -

3/4

3/4

10001200ALGLASSH - -------W2 VERIFY BY BLAST WINDOW MFR

800900ALGLASSH - -------W3 VERIFY BY BLAST WINDOW MFR

100x600

100x600

100x600

100x600

1) VERIFY BY BLAST DOOR MFR

1) LAMINATED GLASS

1) LAMINATED GLASS

1)

100x600

1)

100x600

1) VERIFY BY BLAST DOOR MFR

1) VERIFY BY BLAST DOOR MFR

LAMINATED GLASS

(INNER PANE)

A-23

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

HARDWARE SCHEDULE

HDW-2

HDW-4

HDW-5

HDW-6

HDW-9

HDW-8

HDW-12

KEY BOX : WALL MOUNTED KEY BOX E83513.

COORDINATING WITH THE USER FOR APPROVAL BY COR.

THE CONTRACTOR SHALL SUBMIT MASTER KEYING CHART, 4.

5.

6.

8.

9.

7.

HEAT GAIN AND FIRERATED.

WHITE OR LIGHT BEIGE TO MAXIMIZE REFLECTANCE AND MINIMIZE

BE EQUIPPED WITH HORIZONTAL MINI BLINDS. COLOR SHALL BE

WINDOWS IN ALL AREAS WHERE FUNCTIONALLY WARRANTED SHALL

1.

2.

INSECT SCREEN SHOULD BE EQUIPPED TO ALL EXTERIOR WINDOWS.

NATURAL COLOR FINISH W/ QUARTER SLICED OAK.

ALL WOOD FLUSH DOORS SHALL BE FINISHED FACTORY COATED

10.

HIGH QUALITY AND GRADE PRODUCTS WITH APPROVAL TO COR.

& QUALITY ARE NOT REQUIRED. BUT CONTRACTOR SHOULD INSTALL

AN EXACT MATCH OF THE MANUFACTURERS FUNCTION, GRADE, COLOR,

AND ARE NOT INTENDED TO LIMIT SELECTIONS OF PRODUCTS.

MANUFACTURERS LISTED ARE FOR IDENTIFICATION PURPOSES ONLY

( SHGC : MAX 0.4 )

+ 6 THK TINTED LOW-E TEMPERED GLASS

+ 12 THK AIR SPACE

: 8.75 THK CLEAR LAMINATED GLASS

TYPICAL INSULATED/LAMINATED GLASS FOR WINDOWS

BLAST AL DOOR & WINDOW GLASS SHALL BE PROVIDED BY MFR PER SPEC. 11.

DOOR & WINDOW NOTES

HDW-7

ARCHITECTURAL

THRESHOLD J32100

KICK PLATE J102, SST

CLOSER C02021

(W/ LEVER HANDLE)

LOCKSET 4000-1, F86

HINGES A5111, 114x114

1 DOOR STOP & HOLDER

HDW-10

HINGES A5112 114x114

DOOR STOP LO21611

1 PUSH PLATE J301

1 DOOR CLOSER C02011

1 PULL PLATE J405

KICK PLATE J102, SST1

MARBLE THRESHOLD1

& DOOR / WINDOW NOTE

HARDWARE SCHEDULE

CONTRACTING OFFICER BEFORE FABRICATION AND INSTALLATION

AS ACTUAL SIZE, AND DRAWINGS SHALL BE APPROVED BY THE

SHALL PREPARE SHOP DRAWINGS FOR ALL DOORS AND ALL WINDOWS

OR NEW WALL SHOULD NOT BE EXCEEDED 15MM. THE CONTRACTOR

GAP BETWEEN NEW DOOR OR NEW WINDOW FRAME AND EXISTING WALL

- WDMA TM-8 HINGE LOADING TEST METHOD

- WDMA TM-7 CYCLE SLAM TEST METHOD

2014 O&MA…