B08_J.10_PeckGenVendShipInstr Rev 12 March 31, 2019.pdf

PEO Soldier Staging Facility Peckham Vocational Industries, Lansing, MI

General Vendor Shipping Instructions Revision: 12 Date: 31 March 2019 Approved By: Michael T. Bell

Form Number PGVSI – Revision 11 Page 1 of 5

The following are the minimum required labeling, packaging, and shipping instructions in accordance with MIL-STD-129. All shipments must adhere to the contract and this General Vendor Shipping Instruction, latest revision. Any deviations to these requirements shall be addressed in Section D of the contract.

Peckham Vocational Industries shall not accept collect payment shipments.

Points of Contact (POC) related to questions or comments on these shipping requirements:

Michael T. Bell Logistics Management Specialist PM-Soldier Protection and Individual Equipment Logistics Management Division Office: (703) 704-0551 Cell: (703) 774-8046 michael.t.bell6.civ@mail.mil

SHIP TO LOCATION:

Peckham Vocational Industries, Inc.

7100 Millet Highway Lansing, MI 48917

DODAAC: W912H7

Receiving Hours: Monday – Friday 08:30am – 2:30pm Deliveries made outside of these hours shall be pre-approved by the Supervisor of Receiving.

Points of Contact (POC) for deliveries appointments only:

Eric Cronk 517-316-4246, John Martens 517-316-4347 or Jim Gustafson 517-316-4072

DD-250 (Packing List):

1. The DD-250 packing list shall be attached to the lead pallet, inside a packing list envelope. The packing list shall list each National Stock Number (NSN) or Management Control Number (MCN).

The packing list shall list a quantity for each NSN or MCN contained within the shipment.

2. Items delivered without an NSN or MCN listed on the packing list will not be received in the warehouse until all information is communicated to Peckham Vocational Industries Inc. This includes production and test items.

Bar Tag Instructions:

Bar codes shall be encoded using the Standard 1D Barcode, Code 39 representation complying with all commercial requirements and shall be readable using commercial bar code scanners. The bar code marking shall be applied to a durable label so that heavy handling will not render the bar code unreadable.

General Vendor Shipping Instructions Revision: 12 Date: 31 March 2019 Approved By: Michael T. Bell

Form Number PGVSI – Revision 11 Page 2 of 5

Individual Box Instructions:

1. Box dimensions shall be calculated to maximize the space on the skid while aligning all edges (with no more than one inch overhang), but not exceeding 50” wide x 42” deep x 52” high. The 52” includes the height of the pallet.

2. If the products in the boxes are not enclosed in protective wrapping, the box shall have a Kraft paper liner inside the box on the top and bottom of the product.

3. Each box shall contain only one NSN or MCN.

4. Individual boxes shall not exceed 70 lbs. in total weight.

5. The bursting strength and ECT (Edge Crush Test) of the boxes must be sufficient as to allow for the pallets to be double stacked for transport without tipping, crushing, or bursting.

6. There can be only one single partial (short) box per NSN or MCN per shipment, that box shall be clearly identified as a partial box.

7. All boxes within a shipment, regardless of their location on the pallet, shall be placed on the pallet with the labels facing outward.

8. A single label shall contain, as separate lines, each of the following fields in both human readable and Standard 1D Barcode 39 format as noted:

o National Stock Number (NSN) or Management Control Number (MCN) (Both) o Vendor’s name (Human Readable Only) o Cage Code of the company awarded the contract (Both) o Identification that matches the contract nomenclature (Human Readable) o On Sized Items, the Material Size (Human Readable) o Quantity (Human Readable) o Contract or order number (including the call number) (Both) o Lot number or N/A if not Lot tracked (Both) o Serial Number or N/A if not Serialized (Both) o Products with a “Shelf-Life” requirement shall, include the Date of Manufacture (Human Readable) o Products with a “Shelf-Life” requirement shall, include the Date of Expiration (Human Readable)

General Vendor Shipping Instructions Revision: 12 Date: 31 March 2019 Approved By: Michael T. Bell

Form Number PGVSI – Revision 11 Page 3 of 5

Standard 1D Barcode 39 format

9. Items requiring IUID identification shall contain a 2D barcode, containing the IUID traceability information

General Vendor Shipping Instructions Revision: 12 Date: 31 March 2019 Approved By: Michael T. Bell

Form Number PGVSI – Revision 11 Page 4 of 5

Pallet Instructions:

1. All items shall be delivered on a standard 4-way entry Type 1, 48” wide x 40” deep, Wing Tip Pallet.

A wing tip pallet has a top or bottom deck (or both) that is greater in width than that of the outside stringers for the purpose of increasing the strength of the deck(s) of the pallet. The benefits to this skid its stronger weight bearing capabilities without adding another stringer board.

2. The pallet and packages combination shall not exceed 52” in overall height.

3. The packaging shall not exceed 1” overhang per pallet edges, allowing the final packaged dimensions of the package to be no greater than 50” wide by 42” deep and 52” in height.

4. A pallet may contains multiple National Stock Numbers (NSN) or Management Control Number

(MCN). Each NSN or MCN must be boxed or wrapped separately, clearly identified, and labeled on the pallet.

5. Loads containing multiple contract requirements shall not be mixed on a pallet.

6. The pallet label shall contain a bar code label on the outside of the pallet packaging, containing as separate lines, each of the following fields in both human readable and standard 1D Barcode 39 format:

Peckham Vocational Industries Inc.

7100 Millet Highway Lansing, MI 48917

DODAAC: W912H7

Phone: 517-316-4072

General Vendor Shipping Instructions Revision: 12 Date: 31 March 2019 Approved By: Michael T. Bell

Form Number PGVSI – Revision 11 Page 5 of 5 o Vendor’s name (Human Readable) o Cage Code of the company awarded the contract (Both) o Nomenclature that matches the contract nomenclature (Human Readable) o National Stock Number (NSN) or Management Control Number (MCN) shall be listed on all packaging and accompanying paperwork. (Both)

Items delivered without a NSN or MCN on both the packaging and the accompany paperwork shall not be received in the warehouse until all confirming documentation is communicated to Peckham Vocational Industries Inc. This includes production items and test items.

Pallets containing more than one NSN or MCN shall be clearly identified as a mixed pallet.

o Contract or order number (including the CLIN) (Both) o CLIN (encoded using six characters, including zero fillers placed to the left of the number, for example, 0001AB). (Both) o Exact total quantity (Human Readable) o Contractor Shipment Number, encoded using seven characters or eight if including a suffix, in accordance with the DFARS Appendix F, Part 3. The first three positions will always be alpha, the last three always numeric, and the fourth either alpha or numeric (Both).

o Pallet number and the total number of pallets (Human Readable).

o Shipment Number made against the contract (Both)

7. Wood pallets must be heat treated and contain the international heat treated marking.

8. The boxes on the pallets shall be stretched wrapped to the pallet.