Attachment_4_Part_1-_SOP_385-2026_ _24_Sep_15_Sampling_within_Range_Areas-J_Ford.pdf

US ARMY ABERDEEN TEST CENTER

ABERDEEN PROVING GROUND, MD 21005-5059

STANDARD OPERATING PROCEDURE FOR

SAMPLING WITHIN RANGE AREAS

TEST CENTER SOP NUMBER: 385-2026 DATE: 24 SEPTEMBER 2015

TECHNICAL REVIEW: 24 SEPTEMBER 2017

ADMINISTRATIVE REVIEW: 2 Years

RESIDUAL RISK LEVEL: Medium

PREPARED BY: ________________________________________________

STEVE ACKER, Safety & Occupational Health Office, 278-4688

REVIEWED BY: ________________________________________________

JEREMY FORD, Radiation Safety Officer, 278-6417

SUBMITTED BY: ________________________________________________

HEATHER HILTON, Director, Command Staff, 278-0023

CONCURRENCE:

CHARLES D. VALZ, Director, Firepower Directorate, 278-3792

MARTIN CARROLL, Range Control Officer, 278-2215

LARRY BIRCHFIELD, Environmental Officer, 278-5294

JEANNE M. DITTER, Safety Officer, 278-3607

JOHN R. WALLACE, Technical Director, 306-4001

APPROVAL:

COLONEL MORRIS L. BODRICK, ATC Commander, 306-4003

SOP 385-2026 24 September 2015

SUPERVISOR'S, TEST OFFICER’S AND EMPLOYEE’S

COMPLIANCE INSTRUCTIONS

AND STATEMENTS

All personnel will comply with the procedures and requirements set forth in this standard operating procedure (SOP).

Failure to do so may result in death, personal injury, property damage, and/or damage to equipment entrusted to our care. Individuals who fail to follow this SOP may be subject to disciplinary action.

Any deviation(s) from the procedures set forth herein are not authorized. Changes to this SOP must be coordinated prior to the approval and implementation.

When procedures in this SOP do not adequately or specifically cover the requirements to perform the operation or task safely, the operation or task will not be started, or if in progress, will be halted until the SOP has been changed. The supervisor and/or employee in charge are responsible for notifying all personnel involved in the operation or task of any stoppages associated with this SOP.

Initial training on this SOP will be given to newly assigned workers by their first line supervisor.

After this training, the worker must sign the Employee's Statement Form. In addition, prior to each operation/task the supervisor or test officer will brief workers on at least the following:

a. Specific task requirements and procedures.

b. Individual responsibilities and safety precautions.

c. Any approved changes to the SOP

SOP

SUPERVISOR’S STATEMENT

(MUST BE REVIEWED AND SIGNED QUARTERLY)

1. The supervisor will sign this statement:

a. When first assigned as supervisor of the operation.

b. When an approved change is made to the SOP.

c. At least once per quarter during continuing operations.

d. After absence from the job in excess of 15 consecutive workdays.

2. I have personally reviewed each of the operational steps of the SOP and have no question in my mind that the operation can be performed safely, efficiently, and in compliance with environmental restrictions noted in the SOP. I have verified to my satisfaction that operators have been trained and are capable of performing their part of the operation in a safe and efficient manner and have instructed them to follow the SOP without deviation.

SUPERVISOR’S PRINTED/TYPED NAME: __________________________________

SUPERVISOR’S SIGNATURE DATE

SOP

OPERATOR’S STATEMENT

(MUST BE REVIEWED AND SIGNED QUARTERLY)

1. The operator will sign this statement:

a. When first assigned to the operation.

b. When an approved change is made to the SOP.

c. At least once per quarter during continuing operations.

d. After absence from the job in excess of 15 consecutive workdays.

2. I have read or have had read to me and understand the general and specific safety and environmental requirements, the personnel and explosive limits, and the work description and inspection requirements necessary to accomplish my operation. I have been thoroughly trained in, and am familiar with, my part of the operation and I agree to abide by these instructions throughout my assignment to the operation.

NAME/SIGNATURE DATE OPERATION NUMBER

SOP PREPARER’S

ANNUAL REVIEW

0 I have reviewed this Standard Operating Procedure. The SOP is technically accurate, work practices have not changed, and proper controls are in place to mitigate all identified hazards.

0 I have reviewed this Standard Operating Procedure. The SOP is not technically accurate and/or additional hazards have been identified. The following changes are recommended:

(Signature/Date)

1. PURPOSE: To establish a safe operating procedure and to assign responsibility for environmental sampling within the range areas. Environmental sampling will involve digging soil sediment in areas contaminated with unexploded ordnance (UXO) as well as taking water samples from surface water and well locations.

NOTE:

UXO WILL BE SEARCHED FOR AND IDENTIFIED IAW ATC SOP 385-2384,

UXO DETECTION.

DESTRUCTION OF ANY ITEMS FOUND WILL BE IAW ATC SOP 385-2048, DESTRUCTION

OF HAZARDOUS UXO.

CAUTION:

OPERATIONS WITHIN THE RANGE AREAS, PARTICULARLY ON RECOVERY AND

IMPACT POSITIONS OF THE RANGES, PRESENT AN INHERENT HAZARD TO

OPERATIONS DUE TO POSSIBLE PRESENCE OF DUD AMMUNITION AND/OR

AMMUNITION COMPONENTS. THESE CONDITIONS MUST BE RECOGNIZED AND

ACKNOWLEDGED BY ALL PERSONNEL CONCERNED, AND EVERY PRECAUTION MUST

BE TAKEN TO FURNISH PRACTICAL PROTECTION TO EMPLOYEES AND EQUIPMENT.

2. APPLICABILITY: This SOP applies to sampling in all range areas discussed in the above Caution. The main concern for UXO hazards is when sampling soil or sediment. This sampling typically only requires disturbing the surface. However, soil sampling will be no deeper than 24 inches and sediment no deeper than 12 inches. Water depths shall not exceed 15 feet for sediment sampling.

3. RESPONSIBILITY:

a. Chief, Environmental Division is responsible for analysis of environmental samples with the exception of radiological samples where the ATC Radiation Safety Officer shares this responsibility.

b. Chief, High Explosives Operation are responsible for responding to requests for conducting special policing operations in order to clear an area IAW SOP 385-2384 and 385- 2048 so that other operations, including maintenance or clearing, can be accomplished by reasonable safety practices with specified equipment and practices.

c. Immediate supervisor or worker-in-charge of sampling operations is responsible for:

(1) Enforcing the requirements of this SOP.

(2) Instructing and furnishing guidance to subordinates to achieve and maintain safe work practices.

(3) Providing training on this SOP and ensuring that only qualified personnel are permitted to engage in this operation. Training will include duties, responsibilities, hazards involved and any special precautions to be observed. Verify minimum of Ammunition Skill Level I training.

(4) Ensuring that adequate equipment, materials and tools are provided to obtain maximum efficiency in accomplishing the work.

(5) Ensuring that operating personnel wear the proper protective clothing and equipment.

(6) Scheduling and coordinating all range operations with the Range Operations Division.

d. Watercraft captain/boat operator is responsible for:

(1) Determining the suitability of water conditions for planned operations.

(2) Ensuring all preventive maintenance checks and service (PMCS) on the watercraft vessel are completed.

(3) Ensuring that the boat has the necessary safety equipment (personal flotation devices, throw ring, flares, radio, etc.)

(4) Ensuring all passengers wear their personal flotation devices and are dressed appropriately.

(5) Ensuring boat operators, as a minimum, have completed a safe boating class.

e. Range Operations Division is responsible for granting personnel clearances for all movement in the danger areas. In addition, each range control operator is responsible for informing explosive operations under their control of unfavorable weather warnings.

f. The ATC Radiation Safety Officer is responsible for the disposition of radiological samples and all radiation safety issues.

4. LOCATION OF OPERATIONS: All areas under the jurisdiction of ATC.

5. PERSONNEL LIMITS:

a. No work crew will consist of less than two employees.

b. Crews will be held to the minimum necessary to perform the operation safely and efficiently. Transients will be limited to personnel having an official interest in the operation.

c. Unrelated operations will not be performed within a minimum of 300 feet or additional distance on the range as prescribed by Range Operations Division depending on the operation.

6. MATERIEL LIMITS: Not applicable.

7. SAFETY REQUIREMENTS:

a. Industrial:

(1) A signed copy of this SOP shall be on file. Supervisory personnel shall be responsible for the enforcement of its provision.

(2) There shall be no deviation or change from the approved SOP without coordinating with the ATC Safety and Occupational Health Office, Radiation Safety Officer.

(3) When any unusual condition is noted that is not covered by this SOP, operations will be suspended and it will be reported immediately to the supervisor and Chief, Safety and Occupational Health Office for evaluation and determination of action to be taken.

(4) All hand tools shall be maintained in a good state of repair.

(5) Personnel lifting material will use proper, safe handholds, assume proper lifting positions, avoid twisting when lifting or carrying, and avoid sharp objects.

(6) Leather gloves will be worn, when necessary, to prevent cuts and abrasions to the hands.

(7) All operating personnel will be instructed by the immediate supervisor or worker in charge, in the identification of poisonous vegetation (poison ivy, poison oak, sumac, etc.) and to the presence of insects that bite or sting (e.g., ticks, chiggers, bees, wasps).

(8) Personnel assigned to operations in an area suspected of containing poisonous vegetation, ticks, chiggers etc., will be cautioned by their supervisors to wear clothing snugly fastened at the neck, wrist, and ankles. Clothing will be taped at waist, wrist and ankles.

(9) Personnel will wash potentially exposed body parts before eating, drinking or use of tobacco.

(10) Insect repellent and sting swabs will be provided and employed as a protection against chiggers, ticks, wasps, etc.

(11) Frequent inspection will be made by each employee for presence of ticks on the body. Personnel finding a tick embedded in their body will report to the Kirk Army Health Clinic, or nearest medical facility, for treatment of the bite. Report all incidents to the ATC Safety and Occupational Health Office, 278-3898.

(12) Any employee noting a skin irritation after exposure to poisonous vegetation will report immediately to their supervisor and go to the nearest medical facility for treatment.

Report all incidents to the ATC Safety and Occupational Health Office, 278-3898.

(13) Employees should be further cautioned not to rub their faces, particularly the eyes, with gloves or shirt sleeves, not to eat in an infested area.

(14) Each crew will be furnished a complete first aid kit, and at least two members of the crew will be qualified to perform first aid and CPR.

(15) Safety footwear/boots will be worn by all personnel at all times, to include appropriate non-slip footwear for operations taking place on boats.

(16) A U.S. Coast Guard approved personal flotation device will be worn at all times by all operators while on watercraft vehicles.

Radiological:

(1) PERSONNEL WILL BE MONITORED BY HEALTH PHYSICIST FOR

RADIOACTIVE CONTAMINATION AFTER COMPLETING DU POLICING OPERATIONS OR

SAMPLING IN A RADIOLOGICALLY CONTROLLED AREA.

(2) Protective clothing requirements will be determined by the Health Physicist.

Minimum dress is typically, disposable boots and gloves.

(3) Storage and disposal of DU material will be per ATC Regulation 385-1.

b. Explosive:

(1) Smoking and the use of matches or any other flame-producing or external spark-producing device within an explosive storage area or a posted restricted area is prohibited.

Smoking is restricted to buildings or clearly defined areas which have been approved in writing by the Commander, ATC, and which have been posted with appropriate signs.

(2) DO NOT pick up or disturb unidentified items.

(3) Report all unidentified items to the High Explosive Operations and the Range Operations Division.

(4) DO NOT go outside the boundaries of the access route or work site. DO NOT enter an un-cleared area of the work site without performing a visual sweep for UXO.

(5) DO NOT touch UXO. Suspend all operations immediately upon approach of an electrical storm.

(6) All equipment working with potentially hazardous material will be armored or remotely operated. In operations where more than one armored vehicle will be operating, full 360o protection will be installed on the equipment. The ATC Safety and Occupational Health Office will approve all around equipment prior to its use.

c. Range:

(1) Personnel must obtain clearance from the appropriate range control operator before entering areas and cancel the clearance upon leaving.

(2) A motor vehicle or watercraft vessel will be kept immediately available to each crew in a range area.

EXTREME CARE WILL BE EXERCISED WHEN USING VEHICLES WITH CATALYTIC

CONVERTERS IN AREAS OF DRY VEGETATION.

AT NO TIME WILL SUCH VEHICLES BE PARKED IN AREAS OF DRY VEGETATION

DUE TO THE DANGER OF FIRE.

(3) No vehicle or items of mechanized equipment will be left unattended while the motor is running or with the ignition switch in the “ON” position. Any vehicle or item of equipment which must be left unattended will have the motor turned off and will be parked at least 15 meters (50 ft) from any ammunition or explosive storage site or operation.

(4) When determined by Range Operations Division, a range control operator will support the operation. This decision will be based on location/type of sampling information provided by the project officer.

(5) Ready communication by telephone or radio between the general working area and the control operator will be maintained by the work crew at all times during occupancy of the area.

(6) When a range control operator is not in, the supervisor in charge of the working party will coordinate emergency procedures with the Aberdeen Proving Ground Fire and Emergency Services.

COMMUNICATIONS WILL BE CHECKED BY THE WORK CREW UPON ENTERING THE

AREA AND ALSO DURING THE NOON HOUR PERIOD.

d. Environmental: In the event of a spill, call “911” and then the ATC Environmental Division at 278-5294. If safe and feasible, perform spill containment. The user of this SOP is responsible for cleanup of any spill items. Spill containment materials must be available at the test site.

e. Accident Reporting:

(1) Control hazards to prevent further injury or damage.

(2) Take care of personnel. Call “911” if there’s serious injury.

(3) Notify Range Control. Call A-Tower at 278-2246/2256, B-Tower at 278-2250, C- Tower at 278-3553, or Range Central at 436-4471.

(4) Notify the Safety and Occupational Health Office by calling the Incident Hotline at 278-3898. Notify the area/facility manager. Notify the supervisor(s) of the person(s) involved.

(5) Secure the scene. Personnel and equipment involved in the incident will remain on site until the government Safety Office Investigator has arrived, investigated, and released the scene. Do not remove anything from the scene.

(6) Follow accident reporting procedures contained in ATC Reg 385-2, ATC Safety Program, Chapter 2. Submit a Commander’s Critical Incident Report (CCIR) immediately, but NLT than four hours after the incident.

8. PERSONAL PROTECTIVE CLOTHING AND EQUIPMENT: Personal protective clothing and equipment (PCE) will be maintained at a level appropriate to protect personnel. Normal work clothing will be worn and will include:

ITEM QTY REQ’D

Shoes, Safety Steel Toe 1 pair Safety Glasses As required

Gloves, Leather 1 pair, as required Gloves, Plastic Disposable As required Coveralls, TYVEK 1 suit as required Personal Flotation Device 1/person, as required - Coast Guard approved.

9. TOOLS: Appropriate hand tools as required.

10. BARRICADES/OPERATIONAL SHIELDS: Armored equipment (if necessary) as approved by the ATC Safety and Occupational Health Office.

11. FIRST AID EQUIPMENT:

a. First aid kit: 1 per/crew, (example: NSN 6545-00-922-1200).

b. Soap.

c. Water in sufficient quantity for washing or suitable source of clean running water.

d. Insect/tick repellent.

e. Insect sting swabs (MSA or other suitable type).

12. FIRE FIGHTING EQUIPMENT: Fire extinguisher, chemical, 10BC. These can be found in the trucks used to transport ammunition.

13. OPERATING EQUIPMENT:

ITEM QUANTITY

Magnetometer As Required

First Aid Kit 1 Per Team

Road Blocks/Warning As Required

Signs

Flashing Red Light/Red Flag

As Required

Engineering Equipment As Required

Radio/Telephone 1 Per Team

Watercraft Vessel As Required

Environmental Sampling Kits

As Required

Contamination Monitoring Instrument

As Required

14. PROCEDURE:

a. Prior to sampling operations:

(1) The Sampling Crew will coordinate with Range Operations Division to schedule, select, and gain access to sample areas.

(2) Personnel from the High Explosive Operations will coordinate the operation in the following sequence:

(a) High Explosive Operations personnel along with the Range Operations Division will determine the necessity for range policing, based on the most recent policing, firing activities, and the condition of the vegetation and range area (under water, fairly clear, etc.).

(b) If policing is required ETOs from the High Explosive Operations will be scheduled to inspect and search the area IAW ATC SOP 385-2384, destroy all duds (if required by sampling plan) which can be found IAW ATC SOP 385-2048.

(c) When range areas are being maintained or cleared, the ETO will be at the working area to immediately destroy UXO items detected during these operations. When the UXO does not require destruction, the sampling crew and the ETO will maintain close liaison during the operation.

SAMPLING SHALL NOT BE PERFORMED UNLESS THE

IMMEDIATE DIGGING POINT IS FREE OF UXO.

THE ETO WILL DESIGNATE THE CLEARED AREA (i.e., DEPTH, SURFACE AREA)

FOR SOIL OR SEDIMENT SAMPLING.

(3) Before entering a range area all personnel will be cleared onto the range through the range control operator. This clearance must be canceled immediately upon vacating the area.

Entrance to and exit from a work area will not be accomplished by any road or route other than that specified by the control tower operator, and no employee will leave the assigned work area without proper clearance.

b. Magnetometer sweeps during sampling: The ETO will perform operations IAW ATC

SOP 385-2384.

c. Bay and creek sediment sampling procedure:

(1) All participants will maintain radio communication while in downrange areas.

(2) The boat operator must have a boating safety certificate.

(3) Verify you are at the correct sample location (i.e. reference points, GPS, coordinates, etc.).

DUE TO POSSIBLE UNDERWATER UXO

DO NOT THROW THE ANCHOR OVERBOARD

(4) Anchor the boat by slowly (controlled descent) lowering the anchor(s).

(5) Measure the water depth at the sampling location.

(6) The ETO will verify the area to be sampled is free of any contacts, UXO or otherwise, by performing a magnetometer sweep IAW ATC SOP 385-2384.

ENSURE THE MAGNETOMETER IS CONFIGURED PROPERLY FOR WATER DEPTH (i.e., SHALLOW OR DEEP WATER CONFIGURATION)

(7) The sampler will insert the sampling device in approximate center of the cleared area and perform sampling.

d. Surface soil sampling – 6” or less:

(1) All participants will maintain radio communication while in downrange areas.

(2) The potential sampling area will be located and defined.

(3) The ETO will verify the area to be sampled is free of any subsurface contacts, UXO or otherwise, by performing a magnetometer sweep IAW ATC SOP 385-2384.

(4) The sampler will insert the sampling device in approximate center of the cleared area not to exceed 6” in depth.

e. Sub-surface soil sampling greater than 6” up to 24”:

(1) All participants will maintain radio communication while in downrange areas.

(2) The potential sampling area will be located and defined.

(3) The ETO will verify the area to be sampled is free of any subsurface contacts, UXO or otherwise, by performing a magnetometer sweep IAW ATC SOP 385-2384.

(4) The sampling device will be driven into the ground two (2) feet using hand pressure or if necessary a hammer. The sampling device will be located in the approximate center of the cleared area.

f. Surface water sampling:

(1) Follow access procedures to sampling site as in paragraph 14.c.(1).

(2) Locate sampling site.

(3) Perform sampling using a suitable container being careful not to fall in water.

g. Ground water well sampling:

(1) Follow access procedure to sampling site as in paragraph 14.c.(1).

(2) Locate sampling site.

(3) If operating gas driven well pump, DO NOT smoke or generate sparks. Assure exhaust is covered with spark arrestor.

WARNING:

NO REFUELING OF GAS DRIVEN PUMP WILL BE PERMITTED WITHIN 50 FEET OF UXO.

15. ELECTRICAL STORMS:

a. During normal duty hours, the ATC Atmospheric Effects Team will notify "B" Tower and the ATC Safety and Occupational Health Office of approaching lightning storms. The Atmospheric Effective Team will identify whether the storm affects Aberdeen Area, Edgewood Area, or both areas and will also specify the time frame that the storm is threatening. The Atmospheric Effects Team will not call back unless the specified time frame is changed. Upon notification, the "B" Tower operator will notify all the other towers and the towers will halt all firing tests under their control during the period of lightning threat. All personnel will retire to an approved shelter/building when notified.

b. Operations can resume after the specified time frame has passed unless there is further notification from the Atmospheric Effect Team.

c. On weekends, after duty hours, or when the Atmospheric Effects Team is unavailable for information, the responsible test officer, assembly plant supervisor, or person in charge of operations must use good judgment and determine when to halt and when to resume operations.

16. POSTING: A copy of this SOP will always be in the possession of the immediate supervisor of the crew or the explosives test operator assigned to the area during all active phases of the operation.

17. REFERENCES: ATC SOP 385-2048, Destruction of Hazardous Unexploded Ordinance;

ATC SOP 385-2384, UXO Detection; ATC Reg 385-2, ATC General Safety Program.

JOB HAZARD ANALYSIS JOB TITLE/OPERATION: 385-2026, SAMPLING WITHIN RANGE AREAS (RANGE ACCESS)

BASIC JOB STEPS EXISTING/POTENTIAL HAZARD RISK CORRECTIVE MEASURES RISK

1. UXO Qualification and Certification

1. Personnel untrained to identify UXO and perform magnetometer sweeps. Improper use of equipment and misidentification of UXO results in detonation causing death and/or serious injury to personnel.

ID 1a. All personnel performing magnetometer sweeps will be trained and certified IAW ATC-R 350-8. Documentation of magnetometer training must be on file before personnel engage in magnetometer sweeps.

Personnel will abide by the site supervisor and all the provisions of ATC SOP 385-2384.

1b. All other personnel will have current Ammunition Skill Level I training.

IE

2. Preliminary Site Inspection

2a. Striking exposed UXO resulting in detonation. Death and/or serious injury to personnel.

2b. Wildlife, insect bites. Resulting in allergic reactions, potential rabies, secondary infections.

2c. Physical exertion from lifting/carrying equipment resulting in sprains to arms, legs

ID

IIC

IIIC

2a. Do not walk into suspected UXO area without performing a visual sweep. Be alert for surface UXO, avoid stepping on UXO material. Mark and report all UXO to Range Control. Do not subject UXO to heat, shock, or friction. If UXO poses an imminent hazard, and can be positively identified, stop all other operations and dispose of UXO IAW SOP 385-2048. If UXO cannot be identified and poses an imminent danger, cease all other operations and immediately notify the High Explosive Operations.

2b. Be alert, make noise, do not handle wildlife. Check yourself for ticks. Wear light color clothing with taped cuffs and openings closed. Use insect repellent. Seek medical attention.

2c. Observe work rest regime. Avoid repetitive motion. Ensure proper

IID

IIID

S O

P

-2

A

P P

E N

D

IX

A

S e p te m b e r 2

JOB HAZARD ANALYSIS JOB TITLE/OPERATION: 385-2026, SAMPLING WITHIN RANGE AREAS (RANGE ACCESS)

BASIC JOB STEPS EXISTING/POTENTIAL HAZARD RISK CORRECTIVE MEASURES RISK

and back.

2d. Exposure to environmental conditions resulting in Heat/Cold Stress.

2e. Slips, trips and falls. Minor injuries.

2f. Exposure to poisonous vegetation.

Using brush removal tools. Cuts and lacerations to hands, arms and face.

2g. Exposure to poison oak/ivy/sumac.

Minor skin irritations.

IVC

ergonomics are utilized while handling equipment. Personnel trained in proper lifting techniques.

2d. All personnel will be trained to recognize the symptoms of Cold/Heat Stress. Appropriate shelter to provide warmth or shade will be available at the work site. Water, first aid kits and communication will always be on location.

2e. Be alert, watch for trip hazards and look where you walk. Wear footwear appropriate for the terrain and weather conditions encountered.

2f. Personnel will wear gloves and eye protection when cutting and clearing brush.

2g. Personnel will be trained to recognize poisonous vegetation. Antiseptic soap will be available for cleansing exposed body parts.

IIE

IVD

3. Operate vehicle or boat to sample location.

3. Personnel unfamiliar with range areas. Struck by ordnance from firing program.

ID 3. All personnel shall be briefed prior to entering range areas and be escorted by personnel familiar with the area. Maintain radio communication with range control operator. Vehicle or boat operators will be certified and trained as necessary.

1E

JOB HAZARD ANALYSIS JOB TITLE/OPERATION: 385-2026, SAMPLING WITHIN RANGE AREAS (BAY AND CREEK

SEDIMENT SAMPLING PROCEDURES)

BASIC JOB STEPS EXISTING/POTENTIAL HAZARD RISK CORRECTIVE MEASURES RISK

4a. Operate boat to sample area.

4b. Anchoring the boat.

4c. ETO verifies the area is free of UXO.

4d. Perform sampling.

4a. See step 3.

4b. Anchor strikes ordnance.

4c. Boat moves to un-swept area. Strike UXO causing death/serious injury.

4d. Exposure to elements. Potential contamination.

4. See step 3.

4b. DO NOT THROW anchor overboard.

Lower anchors slowly.

4c. Keep boat stabilized. ETO declares UXO free zone. Area is considered UXO free to a depth of 2 feet if no magnetic contacts are found.

4d. Wear disposable gloves and boots, and safety eyewear. Survey for contamination and clean sampling tools after use.

IIE

5a. Operate vehicle to sample area.

5b. Locate sample area.

5c. The ETO certifies that the sampling area is free of UXO.

5d. Perform sediment sampling.

5a. See step 3.

5b1 Personnel unfamiliar with range areas.

Struck by ordnance.

5b2 Contact with radioactive contamination.

5c. See 1 and 2a above.

5d. Radiation contamination.

5a. See step 3.

5b1 All personnel shall be briefed prior to entering range areas and be escorted by personnel familiar with the area.

5b2 All personnel are to have an annual radiation safety briefing given by the Safety Div before entering controlled radiation areas.All personnel will wear appropriate PCE for the sampling type

5c. See 1 and 2a above.

5d. All personnel and equipment will be surveyed for radiation contamination.

Personnel wash their hands upon exiting.

IIIE

JOB HAZARD ANALYSIS JOB TITLE/OPERATION: 385-2026, SAMPLING WITHIN RANGE AREAS (RANGE AREAS SOIL

SAMPLING PROCEDURES)

BASIC JOB STEPS EXISTING/POTENTIAL HAZARD RIS

K

CORRECTIVE MEASURES RISK

6. Proceed to sample location.

6a. The ETO verifies the sampling area is free of UXO.

6b Drive sampling device into the ground.

6c. Perform sampling.

6d. Clean all tools and equip.

6e. Proceed to next location.

6. See step 3.

6a. Misidentified and/or unsafe UXO is moved resulting in death and/or serious injury.

6b. Hammer of device strikes someone.

6c. Exposure to elements.

Potential contamination.

6d. Cross contamination, radiation or other.

6. See step 3.

6a. NO attempt will be made to move any UXO.

Sample away from UXO in a UXO free zone.

6b. Use hand pressure or if necessary hammer to drive device. Wear leather gloves and safety eyewear.

6c. Wear leather gloves over plastic gloves, safety eyewear. Survey for contamination (radiation and other) and clean sampling tools.

6d. Decontaminate and/or clean equipment.

7. Proceed to sample location.

7a. Boat work and anchoring.

7b. Ground access.

7c. Perform sample.

7. See step 3.

7a. Exposure to elements.

Potential contamination. Potential of striking UXO w/anchor.

7b. See step 3.

7c. Exposure to elements, potential contamination.

7. See step 3.

7a. Wear PFD, plastics gloves, safety eyewear.

Survey for contamination and clean sampling tools.

7b. See step 3.

7c. Wear plastic gloves and safety eyewear.

Survey for contamination and clean sampling tools.

8. Proceed to sample location.

8a. Operate gas driven well pump for subsurface sampling only.

8b. Perform sample.

8. See step 3.

8a. Gasoline explosion, hot muffler, water spray.

8b. See step 7c.

8. See step 3.

8a. No smoking in UXO area, do not touch muffler, check for contamination and wash hands.

8b. See step 7c.