W912QR-22002077A_CorrFinal_Specs-0000.pdf

Solicitation For Indoor Small Arms Range, Hulman Air National Guard (ANG), Terre Haute, IN P2: 500352 Design-Build

Specifications

16 January 2025

W912QR-22002077A

Corrected Final Design

ARIMS: 200A

Disposition: Maintain for 15yrs after construction

W912QR-22002077A_CorrFinal_Specs-0000

REPLY TO

ATTENTION

OF

DEPARTMENT OF THE ARMY

U. S. ARMY ENGINEER DISTRICT, LOUISVILLE

CORPS OF ENGINEERS

P.O. BOX 59

LOUISVILLE, KENTUCKY 40201-0059

CELRL-CT 16 January 2025

A&H Ambica JV, LLC

Butt Construction Company, Inc.

Howard W. Pence, Inc.

KUNJ Construction Corp.

SES Construction and Fuel Services, LLC

FUTRON, Inc.

HDD JV

Dear MATOC Contractors

Reference is made to Indefinite Delivery Indefinite Quantity (IDIQ), Numbers W912QR21D0056 through W912QR21D0060, W912QR21D0085 and W912QR21D0086 to provide Design/Build

Construction Services within the Great Lakes and Ohio River Division Mission Boundaries.

We request you submit a price proposal for the IN ANG Small Indoor Arms Range at Terre Haute, IN.

This work is detailed in the drawings, and specifications, and General Wage Determination

IN20250003 as attached. All vendors must be registered in the SAM database at the time of proposal submission. The estimated cost range is more than $10,000,000.

The basis for award of this task order is lowest evaluated price. Please complete the price breakout schedule, to include the labor category table demonstrating the use of the binding rates included in your MATOC contract. The submitted price breakdown should include sufficient detail to allow the Government to verify that your proposed price incorporates the binding rates from your base contract. Any level of effort shown in the submitted information will not be used for evaluation purposes and will be used only to ensure that the proposal is in compliance with the binding rates from the base contract.

Offers providing less than 60 calendar days for Government acceptance after the date offers are due may not be considered and may be rejected.

Proposals are due no later than 11:00 AM ET on 17 February 2025. Submit your proposal by email to Stephanie Drees at stephanie.n.drees@usace.army.mil. Proposals not received by the stated date/time will not be considered. Please acknowledge receipt of this RFP by signing below in the space provided and returning to Stephanie Drees via email.

Payment and Performance Bonds will be required for this project. The Notice to Proceed will be issued after receipt and approval of the bonds.

mailto:stephanie.n.drees@usace.army.mil

All questions regarding this Request for Proposal (RFP) must be submitted via ProjNet. The website to access this system is www.projnet.org and the bidder inquiry key for this specific project is: MS8IMR-FU4CHT. No Government responses will be entered into the ProjNet system within two (2) days prior to the proposal due date stated in this letter.

System for Award Management (SAM): Your SAM registration is required to be active at the time of proposal submission. You must submit a notarized letter appointing the authorized Entity

Administrator before your registration will be activated. This requirement now applies to both new and existing entities. Effective 29 April 2018, the notarized letter process is now mandatory on all CURRENT registrants at SAM who have a requirement to update data on their SAM record. The notarized letter is mandatory and is required before the GSA Federal Service Desk

(FSD) will activate the entity's registration.

If you have contractual questions, please contact Stephanie Drees at stephanie.n.drees@usace.army.mil. If an Offeror believes that the requirements in the RFP contain an error, omission, or are otherwise unsound; the offeror shall immediately notify the Contract

Specialist in writing with supporting rationale. The Offeror is reminded that the Government reserves the right to award this RFP based on the initial proposals, as received, without discussion.

JUDD.APRI Digitally signed by

JUDD.APRIL.CAR

408885210 OL.1408885210

April C. Judd Contracting Officer

L.CAROL.1

W912QR-22002077A_CorrFinal_Specs-0000 http://www.projnet.org/ mailto:stephanie.n.drees@usace.army.mil

OFFEROR'S QUESTIONS AND COMMENTS

Technical inquiries and questions relating to proposal procedures or bonds are to be submitted via Bidder Inquiry in ProjNet at http://www.ProjNet.org/ProjNet. As noted below, offerors shall not submit their proposals via ProjNet. Offerors shall submit their proposals in accordance with the provisions stated in the solicitation.

To submit and review bid inquiry items, bidders will need to be a current registered user or self-register into system.

The Solicitation Number is: W912QR-22002077A

The Bidder Inquiry Key is: MS8IMR-FU4CHT

Specific Instructions for ProjNet Bid Inquiry Access:

1. From the ProjNet home page linked above, click on Quick Add on the upper right side of the screen.

2. Identify the Agency. This should be marked as USACE.

3. Key. Enter the Bidder Inquiry Key listed above.

4. Email. Enter the email address you would like to use for communication.

5. Select Continue. A page will then open stating a user account was not found and will ask you to create one using the provided form.

6. Enter your First Name, Last Name, Company, City, State, Phone, Email, Secret

Question, Secret Answer, and Time Zone. Make sure to remember your Secret Question and Answer as they will be used from this point on to access the ProjNet system.

7. Select Add User. Once this is completed you are now registered within ProjNet and are currently logged into the system.

Specific Instructions for Future ProjNet Bid Inquiry Access:

1. For future access to ProjNet, you will not be emailed any type of password. You will utilize your Secret Question and Secret Answer to log in.

2. From the ProjNet home page linked above, click on Quick Add on the upper right side of the screen.

3. Identify the Agency. This should be marked as USACE.

4. Key. Enter the Bidder Inquiry Key listed above.

5. Email. Enter the email address you used to register previously in ProjNet.

6. Select Continue. A page will then open asking you to enter the answer to your

Secret Question.

7. Enter your Secret Answer and click Login. Once this is completed you are now logged into the system.

From this page you may view all bidder inquiries or add an inquiry.

Bidders will receive an acknowledgement of their question via email, followed by an answer to their question after it has been processed by our technical team.

http://www.projnet.org/ProjNet

Offerors are requested to review the specification in its entirety and to review the Bidder Inquiry

System for answers to questions prior to submission of a new inquiry.

The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800-428-HELP.

Offers will NOT be publicly opened. Information concerning the status of the evaluation and/or award will NOT be available after receipt of proposals.

NOTES:

1. Offerors shall not submit their proposals via ProjNet, but in accordance with the provisions stated in the solicitation. Any questions regarding acceptable means of submitting offers shall be made directly to the Contract Specialist identified in the solicitation.

2. Government responses to technical inquiries and questions relating to proposal procedures or bonds that are submitted to ProjNet in accordance with the procedures above are not binding on the Government unless an amendment is issued on Standard

Form 30. In the case of any conflicts, the solicitation governs. Any changes or revisions to the solicitation will be made by formal amendment. Government responses will be limited to: (a) Notice that an amendment will be issued; (b) Reference to an existing requirement contained in the solicitation; or (c) Notice that a response is not necessary.

3. The ability to enter technical inquiries and questions relating to proposal procedures or bonds will be disabled five (5) calendar days prior to the closing date stated in the solicitation. No Government responses will be entered into the ProjNet system within two (2) calendar days prior to the closing date stated in the solicitation.

SECTION 00 10 00 – Solicitation Contract Form

PRICE BREAKOUT SCHEDULE

OFFEROR’S NAME:

BID SCHEDULE

ITEM

NUMBER Description UNIT AMOUNT

BASE Work For 10-Lane Range and 1,350 SF

CATM

0001 All work, labor, and materials required to design a 7,875 SF 10-Lane

Small Arms Firing Range and a 1,350 SF CATM

Facility as described in this RFP

JOB

0002 All work, labor, materials, and equipment required to construct a 7,875 SF 10-Lane

Small Arms Firing Range and a 1,350 SF CATM

Facility as described in this RFP .

JOB

TOTAL PROJECT BASE PROPOSAL

OPTION 1 Design Fee - Additional 4-Lanes within Range

0003 All additional work, labor, and materials required to design a 10,500 SF

14-Lane Small Arms Firing Range as described in this RFP. JOB $_

0004 All additional work, labor, materials, and equipment required to construct a 10,500 SF

14-Lane Small Arms Firing Range as described in this RFP. JOB

OPTION 3 Design of 1,800 SF CATM

0005 All additional work, labor, and materials required to design an 1,800 SF

CATM Facility as described in this RFP. JOB

0006 All additional work, labor, materials, and equipment required to construct an 1,800 SF

CATM Facility as described in this RFP. JOB

OPTION 2 Construction of Additional 4-Lane within Range

OPTION 4 Construction of 1,800 SF CATM

OPTION 5 Design of Furniture, Fixtures, and Equipment (FFE)

0007 All additional work, labor, and materials required to design the FFE. JOB $_

0008 All additional work, labor, materials, and equipment required to procure and install the FFE JOB $_

0009 All additional work, labor, and materials required to design the target retrieval system JOB $_

0010 All additional work, labor, materials, and equipment required to procure and install the target retrieval system. JOB

0011 All additional work, labor, and materials required for full detail design of the Access Control System. JOB

OPTION 10 Procurement and Installation of the

Access Control System 0012 All additional work, labor, materials, and equipment required to procure and install full Access

Control System. JOB $_

TOTAL ALL OPTIONS PROPOSAL $_

Total All CLINs $_

NOTES FOR CONTRACT LINE ITEM (CLIN) SCHEDULE

NOTE NO. 1. To better facilitate the receipt and proposal process, all modifications to proposals are to be submitted on copies of the latest

Contract Line Item (CLIN) schedules as published in the solicitation or the latest amendment thereto. In lieu of indicating additions/deductions to line items, all Offerors should state their revised prices for each item.

NOTE NO. 2. Offerors must insert a price on all numbered items including options of the CLIN schedule. Failure to do so may result in the offer being unacceptable.

NOTE NO. 3. The Offeror’s Base Bid and all Options will be evaluated by lowest price. In accordance with 52.217-5, Evaluation of Options, the

Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. Evaluation of

OPTION 6 Construction of Furniture, Fixtures, and Equipment

OPTION 7 Design of the Target Retrieval System

OPTION 8 Procurement and Installations of the

Target Retrieval System

OPTION 9 Full Design of Access Control System options will not obligate the government to exercise the option(s).

NOTE NO. 4. CLINs 0003 through 0006 are for the additional costs associated with increasing the Small Arms Firing Range included in the base CLINs 0001 and 0002 to a total of 10,500 SF and 14 Lanes.

NOTE NO. 5 All options, except for Option 5 and Option 6, may be exercised within 30 calendar days from issuance of Notice to Proceed. Exercising any, or all, of the options will not extend the Task Order period of performance.

Note No. 6 Option 5 & Option 6 may be exercised within 365 calendar days from NTP. Exercising any, or all, of the options will not extend the Task

Order period of performance.

SECTION 00 70 00

52.211-10 Commencement, Prosecution, and Completion of Work (Apr 1984)

The Contractor shall be required to

(a) commence work under this contract within 10 calendar days after the date the Contractor receives the

Construction Notice to Proceed (NTP),

(b) prosecute the work diligently, and

(c) all work must be completed within 660 calendar days from Notice to Proceed (NTP).

*The time stated for completion shall include final cleanup of the premises.

(End of Clause)

52.211-12 Liquidated Damages -- Construction (Sept 2000)

(a) If the Contractor fails to complete the work within the time specified in the contract, the

Contractor shall pay liquidated damages to the Government in the amount of $1,440.00 for each calendar day of delay until the work is completed or accepted.

(b) If the Government terminates the Contractor’s right to proceed, liquidated damages will continue to accrue until the work is completed. These liquidated damages are in addition to excess costs of repurchase under the Termination clause.

52.211-13 Time Extensions (Sept 2000)

Time extensions for contract changes will depend upon the extent, if any, by which the changes cause delay in the completion of the various elements of construction. The change order granting the time extension may provide that the contract completion date will be extended only for those specific elements related to the changed work and that the remaining contract completion dates for all other portions of the work will not be altered. The change order also may provide an equitable readjustment of liquidated damages under the new completion schedule.

52.217-7 -- Option for Increased Quantity -- Separately Priced Line Item.

The Government may require the delivery of the numbered line item, identified in the Schedule as an option item, in the quantity and at the price stated in the Schedule. The Contracting Officer may exercise the option

Reference Price Breakout Schedule. Delivery of added items shall continue at the same rate that like items are called for under the contract unless the parties otherwise agree.

52.236-1 Performance of Work by the Contractor.

The Contractor shall perform on the site, and with its own organization, work equivalent to at least 20 percent of the total amount of work to be performed under the contract. This percentage may be reduced by a supplemental agreement to this contract if, during performing the work, the Contractor requests a reduction, and the

Contracting Officer determines that the reduction would be to the advantage of the Government.

(End of clause)

52.236-4 Physical Data (Apr 1984)

Data and information furnished or referred to below is for the Contractor’s information. The Government shall not be responsible for any interpretation of, or conclusion drawn from the data or information by the

Contractor.

(a) The indications of physical conditions on the drawings and in the specifications are the result of site investigations by surveys.

(b) Weather conditions: The Contractor shall make his own investigations as to weather conditions at the site.

Data may be obtained from various National Weather Service offices located generally at airports of principal cities, the nearest to this project being: Indianapolis, IN

(c) Transportation facilities: Access ways shall be investigated by the Contractor to satisfy himself as to their existence and allowable use.

(d) Historical data for all areas may be obtained from:

U. S. Department of Commerce

National Climatic Center

Federal Building

Asheville, N. C. 28801

52.236-27 Site Visit (Construction) (Feb 1995) – Alternate I (Feb 1995)

(a) The clauses at 52.236-2, Differing Site Conditions, and 52.236-3, Site Investigations and Conditions

Affecting the Work, will be included in any contract awarded as a result of this solicitation. Accordingly, offerors or quoters are urged and expected to inspect the site where the work will be performed.

(b) An organized site visit has been scheduled for –

28 January 2025 at 1000 ET

The Point of Contact (POC) for the site visit is:

Mrs. Esther Roman

Esther.Roman@us.af.mil

217-620-3272

Please send the following information to the POC no later than close of business Friday, January 23, 2025:

- Full Name

- Date of Birth mailto:Esther.Roman@us.af.mil

- Driver’s License Number

- Driver’s License State

- Social Security Number (if Driver’s License is not an Indiana Driver’s License)

(End of provision)

52.246-21 Warranty of Construction (Mar 1994)

(a) In addition to any other warranties in this contract, the Contractor warrants, except as provided in paragraph (i) of this clause, that work performed under this contract conforms to the contract requirements and is free of any defect in equipment, material, or design furnished, or workmanship performed by the

Contractor or any subcontractor or supplier at any tier. This warranty shall continue for a period of 1 year from the date of final acceptance of the work. If the Government takes possession of any part of the work before final acceptance, this warranty shall continue for a period of 1 year from the date the Government takes possession.

(b) The Contractor shall remedy at the Contractor’s expense any failure to conform, or any defect. In addition, the Contractor shall remedy at the Contractor’s expense any damage to Government-owned or controlled real or personal property, when that damage is the result of --

(1) The Contractor’s failure to conform to contract requirements; or

(2) Any defect of equipment, material, workmanship, or design furnished.

(c) The Contractor shall restore any work damaged in fulfilling the terms and conditions of this clause. The

Contractor’s warranty with respect to work repaired or replaced will run for 1 year from the date of repair or replacement.

(d) The Contracting Officer shall notify the Contractor, in writing, within a reasonable time after the discovery of any failure, defect, or damage.

(e) If the Contractor fails to remedy any failure, defect, or damage within a reasonable time after receipt of notice, the Government shall have the right to replace, repair, or otherwise remedy the failure, defect, or damage at the Contractor’s expense.

(f) With respect to all warranties, express or implied, from subcontractors, manufacturers, or suppliers for work performed and materials furnished under this contract, the Contractor shall –

(1) Obtain all warranties that would be given in normal commercial practice;

(2) Require all warranties to be executed, in writing, for the benefit of the Government, if directed by the Contracting Officer; and

(3) Enforce all warranties for the benefit of the Government, if directed by the Contracting Officer.

(g) In the event the Contractor’s warranty under paragraph (b) of this clause has expired, the Government may bring suit at its expense to enforce a subcontractor’s, manufacturer’s, or supplier’s warranty.

(h) Unless a defect is caused by the negligence of the Contractor or subcontractor or supplier at any tier, the

Contractor shall not be liable for the repair of any defects of material or design furnished by the Government nor for the repair of any damage that results from any defect in Government-furnished material or design.

(i) This warranty shall not limit the Government’s rights under the Inspection and Acceptance clause of this contract with respect to latent defects, gross mistakes, or fraud.

52.222-23 Notice of Requirement for Affirmative Action to Ensure Equal Employment Opportunity for Construction.

(a) The offeror’s attention is called to the Equal Opportunity clause and the Affirmative Action Compliance

Requirements for Construction clause of this solicitation.

(b) The goals for minority and female participation, expressed in percentage terms for the Contractor’s aggregate workforce in each trade on all construction work in the covered area, are as follows:

Location Goals for Minority Participation for Each Trade

Goals for Female Participation for Each Trade

Terre Haute, IN 3.1% 6.9%

These goals are applicable to all the Contractor’s construction work performed in the covered area. If the

Contractor performs construction work in a geographical area located outside of the covered area, the Contractor shall apply the goals established for the geographical area where the work is actually performed. Goals are published periodically in the Federal Register in notice form, and these notices may be obtained from any Office of Federal Contract Compliance Programs office.

(c) The Contractor’s compliance with Executive Order11246, as amended, and the regulations in 41 CFR

60-4 shall be based on (1) its implementation of the Equal Opportunity clause, (2) specific affirmative action obligations required by the clause entitled "Affirmative Action Compliance Requirements for Construction," and

(3) its efforts to meet the goals. The hours of minority and female employment and training must be substantially uniform throughout the length of the contract, and in each trade. The Contractor shall make a good faith effort to employ minorities and women evenly on each of its projects. The transfer of minority or female employees or trainees from Contractor to Contractor, or from project to project, for the sole purpose of meeting the

Contractor’s goals shall be a violation of the contract, Executive Order11246, as amended, and the regulations in 41 CFR 60-4. Compliance with the goals will be measured against the total work hours performed.

(d) The Contractor shall provide written notification to the Deputy Assistant Secretary for Federal

Contract Compliance, U.S. Department of Labor, within 10 working days following award of any construction subcontract in excess of $10,000 at any tier for construction work under the contract resulting from this solicitation. The notification shall list the-

(1) Name, address, and telephone number of the subcontractor;

(2) Employer’s identification number of the subcontractor;

(3) Estimated dollar amount of the subcontract;

(4) Estimated starting and completion dates of the subcontract; and

(5) Geographical area in which the subcontract is to be performed.

(e) As used in this Notice, and in any contract resulting from this solicitation, the "covered area" is Hardin

County in Fort Knox, Kentucky.

(End of provision)

252.236-7001 Contract Drawings and Specifications (Aug 2000)

(a) The Government will provide to the Contractor, without charge, one set of contract drawings and specifications, except publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by the Contracting Officer. The Contractor shall—

(1) Check all drawings furnished immediately upon receipt;

(2) Compare all drawings and verify the figures before laying out the work;

(3) Promptly notify the Contracting Officer of any discrepancies;

(4) Be responsible for any errors that might have been avoided by complying with this paragraph (b); and

(5) Reproduce and print contract drawings and specifications as needed.

(b) In general—

(1) Large-scale drawings shall govern small-scale drawings; and

(2) The Contractor shall follow figures marked on drawings in preference to scale measurements.

(c) Omissions from the drawings or specifications or the misdescription of details of work that are manifestly necessary to carry out the intent of the drawings and specifications, or that are customarily performed, shall not relieve the Contractor from performing such omitted or misdescribed details of the work. The Contractor shall perform such details as if fully and correctly set forth and described in the drawings and specifications.

(d) The work shall conform to the specifications and the contract drawings identified on the following index of drawings: G-002

(End of clause)

"General Decision Number: IN20250003 01/03/2025

Superseded General Decision Number: IN20240003

State: Indiana

Construction Type: Building

Counties: Clay, Gibson, Greene, Owen, Parke, Posey, Putnam, Sullivan, Vanderburgh, Vermillion, Vigo and Warrick Counties in

Indiana.

BUILDING CONSTRUCTION PROJECTS (does not include residential construction consisting of single family homes and apartments up to and including 4 stories)

Note: Contracts subject to the Davis-Bacon Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

Please note that these Executive Orders apply to covered contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but do not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(1).

|If the contract is entered |. Executive Order 14026 |

|into on or after January 30, | generally applies to the |

|2022, or the contract is | contract. |

|renewed or extended (e.g., an |. The contractor must pay |

|option is exercised) on or | all covered workers at |

|after January 30, 2022: | least $17.75 per hour (or |

| | the applicable wage rate |

| | listed on this wage |

| | determination, if it is |

| | higher) for all hours |

| | spent performing on the |

| | contract in 2025. |

|If the contract was awarded on|. Executive Order 13658 | |or between January 1, 2015 and| generally applies to the |

|January 29, 2022, and the | contract. |

|contract is not renewed or |. The contractor must pay all|

|extended on or after January | covered workers at least |

|30, 2022: | $13.30 per hour (or the |

| | applicable wage rate listed|

| | on this wage determination,|

| | if it is higher) for all |

| | hours spent performing on |

| | that contract in 2025. |

The applicable Executive Order minimum wage rate will be adjusted annually. If this contract is covered by one of the

Executive Orders and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must still submit a conformance request.

Additional information on contractor requirements and worker protections under the Executive Orders is available at http://www.dol.gov/whd/govcontracts.

Modification Number Publication Date

0 01/03/2025

ASBE0018-003 06/01/2024

CLAY, GREENE, OWEN, PARKE, PUTNAM, VERMILLION AND VIGO COUNTIES

Rates Fringes

ASBESTOS WORKER/HEAT & FROST

INSULATOR (includes application of all insulating materials protective coverings, coatings and finishes to all types of mechancial systems) ............. $ 38.55 23.53

HAZARDOUS MATERIAL HANDLER

(includes preparation, wettings stripping, removal, scrapping, vacuuming, bagging

& disposing of all insulation materials, whether they contain asbestos or not, from mechanical systems) ............. $ 23.00 14.40

ASBE0037-002 04/02/2023

GIBSON, POSEY, SULLIVAN, VANDERBURGH AND WARRICK COUNTIES

ASBESTOS WORKER/HEAT & FROST

INSULATOR (includes application of all insulating materials protective coverings, coatings an finishes to all types of mechanical systems. Also the application of firestopping material openings and penetrations in walls, floors, ceilings, curtain walls and all lead abatement).......................$ 32.00 21.84

BOIL0374-002 01/01/2024

Rates Fringes

BOILERMAKER......................$ 42.41 35.72

http://www.dol.gov/whd/govcontracts

BRIN0001-001 06/01/2023

EVANSVILLE

POSEY, VANDERBURGH and WARRICK COUNTIES

Rates Fringes

Bricklayer, Stonemason...........$ 34.17 20.14

Marble, Tile & Terrazzo

Finisher.........................$ 22.09 16.34

Marble, Tile & Terrazzo

Workers..........................$ 28.49 16.46

BRIN0004-012 06/01/2024

BLOOMINGTON

OWEN COUNTY

Bricklayer, Stonemason. .......... $ 35.21 18.19

TERRAZZO FINISHER ............... $ 25.33 14.19

TERRAZZO WORKER/SETTER .......... $ 37.97 18.06

Tile & Marble Finisher .......... $ 25.33 14.19

Tile, Marble Setter .............. $ 37.22 18.05

BRIN0005-001 09/21/2023

TERRE HAUTE CLAY, GIBSON, REENE, PARKE, SULLIVAN, VERMILLION

and VIGO COUNTIES

BRICKLAYER

BRICKLAYER, STONE MASON

and POINTER/CLEANER/CAULKER.$ 30.13 11.65

CEMENT MASON (GREENE and

SULLIVAN COUNTIES). ........ $ 27.78 11.02

CEMENT MASON (REMAINING

COUNTIES)...................$ 27.93 11.02

TERRAZZO FINISHER .......... $ 23.38 1315

TERRAZZO....................$ 27.50 15.20

TILE and MARBLE FINISHER ... $ 19.83 6.32

TILE, MARBLE, MOSAIC ....... $ 35.63 17.23

CARP0088-001 10/01/2024

CLAY, OWEN, PARKE, PUTNAM, VERMILLION AND VIGO COUNTIES

Carpenters:

Carpenters, Drywall Installers, Piledrivers.....$ 35.55 23.80

Millwright..................$ 36.94 25.42

Soft Floor Layers...........$ 34.45 21.08

CARP0224-004 04/01/2024

POSEY, VANDERBURGH AND WARRICK COUNTIES

CARPENTER

Carpenter...................$ 31.49 25.46

Piledriver..................$ 32.49 25.36

CARP0224-005 04/01/2024

GREENE, GIBSON and SULLIVAN COUNTIES

Rates Fringes

CARPENTER

Carpenter...................$ 31.48 25.46

Piledriver..................$ 28.71 22.45

CARP1080-002 04/01/2024

MILLWRIGHT

ZONE 1

POSEY, VANDERBURGH and

WARRICK COUNTIES...........$ 34.40 27.61

ZONE 2

GIBSON, GREENE AND

SULLIVAN COUNTIES..........$ 33.10 28.57

ELEC0016-004 04/01/2024

GIBSON, POSEY, VANDERBURGH AND WARRICK COUNTIES

ELECTRICIAN ..................... $ 43.51 20.92

ELEC0481-001 05/31/2024

PUTNAM COUNTY

ELECTRICIAN ..................... $ 42.15 26.88

ELEC0538-002 06/01/2023

VERMILLION COUNTY

ELECTRICIAN ..................... $ 39.09 24.37

ELEC0725-003 10/01/2024

CLAY, GREENE, OWEN, PARKE, SULLIVAN AND VIGO COUNTIES

ELECTRICIAN......................$ 43.30 25.32

ELEC0725-010 06/01/2022

CLAY, GREENE, OWEN, PARKE, SULLIVAN AND VIGO COUNTIES

Communication Technician.........$ 30.00 18.07

Includes the installation, operation, inspection, maintenance, repair and service of radio, television, recording, voice sound and vision production and reproduction apparatus, equipment and appliances used for domestic, commercial, education, entertainment and private telephone systems.

ELEV0003-002 01/01/2023

GIBSON, POSEY, VANDERBURGH and WARRICK COUNTIES

ELEVATOR MECHANIC................$ 57.69 37.335+a+b

FOOTNOTES:

a) Employer contributes as a vacation pay credit 8% basic hourly rate for more than 5 years of service and 6% basic hourly rate for less than 5 years of service.

b) Eight Paid Holidays: Thanksgiving Day; New Year's Day;

Memorial Day; Independence Day; Labor Day; Veteran's Day, Thanksgiving Day, the Friday after Thanksgiving Day and

Christmas Day.

ELEV0034-002 01/01/2024

CLAY, GREENE, OWEN, PARKE, PUTNAM, SULLIVAN, VERMILLION and

VIGO COUNTIES

ELEVATOR MECHANIC................$ 57.68 37.885+a+b

a) PAID HOLIDAYS: New Year's Day, Memorial Day, Independence

Day, Labor Day, Vetern's Day, Thanksgiving Day, the Friday after Thanksgiving, and Christmas Day.

b) Employer contributes 8% of regular hourly rate to vacation pay credit for employee with more than 5 years of service;

6% for less than 5 years' service.

ENGI0181-013 04/01/2024

GIBSON, POSEY, VANDERBURGH, and WARRICK COUNTIES

Power equipment operators:

GROUP A.....................$ 41.28 19.72

GROUP B.....................$ 33.15 19.72

POWER EQUIPMENT OPERATOR CLASSIFICATIONS

GROUP A: A-Frame Winch Truck, Articulating dump, autograde

(CMI), auto patrol, ballast regulator (RR), batcher plant

(electrical control concrete), bending machine (pipe), bituminous plant (engineer), bituminous plant, bituminous mixer travel plant, bituminous paver, bituminous roller, boring machine, buck hoist, bull dozer, cable way, Chicago boom, chimney hoist, clamshell, concrete mixer (21 cu. ft.

or over), concrete paver, concrete pump (crete), construction elevator (Allmac or similar) crane, craneman, crawler backhoe, crawler high-lift, crusher plant, derrick, derrick boat, dinkey, directional/boring machine, dope pots

(pipeline), double drum tugger (electric or air), dragline, dredge operator, dredge engineer, drill operator, elevating grader, extendable boom forklift, formless paver, gantry crane, gator (or similar type tiller), gradeall, grader, grademan, greaser ( on grease facility servicing heavy equipment), G.P.S System (on equipment with the classifications), grout pump, head greaser, helicopter crew, Hetherington paver, hoist (motorized, gas or diesel), hydraulic crane, hydro blaster, Industrial type forklift

(over 9,000 lbs), laser concrete screed, laser or remote contrlled equipment (within the classifications), locomotive crane, locomotive, mechanic, mobile mixer, motor crane, mucking machine, multiple tamping machine (RR) overhead crane, pile driver, pulls, push dozer, push boats, roller (sheep foot), rough terrain crane, R.T. backhoe, R.T. endloader, Ross carrier, scoop, shovel, side boom, skidstter loader (obcat or similar type), swing crane, tail boom, tar machine (pipeline), tower crane, trench machine, welder (heavey duty), truck mounted concrete pump, truck-mounted drill, vacuum truck, well point whirleys.

GROUP B: Air Compressor (1 or more, 600 cfm and over), air compressor with throttle valve, bituminous distrubtor, brakeman, bullfloat, cement gun, concrete mixer, concrete mixer, concrete saw, concrete spreader or puddlers, conveyor, deck hand oiler, deck engine, drill helper, earth roller, electric vibrator compactor (earth or rock), elevator (in-plant, automatic), finishing machine, fireman, form grader, generator, guard-rail driver, heater, oiler, Industrial type forklift (9,000 lbs and under), material pump, motor boats, paving joint machine, post hole digger, power broom, power traffic signals, rock roller, rock spreader, Roller (earth or rock), spike machine (RR), steam jenny, sub grader, tamping machine, truck crane oiler, truck mounted drill oiler, Tugger (one-drum, air or electric) vibrator, vibro-piling hammer-hydraulic hammer or auger, water pump, widener (apsco or similar type) welding machine, JLG lifts and scissor lifts or similar machine.

ENGI0841-001 04/01/2023

REMAINING COUNTIES

Rates Fringes

Power equipment operators:

GROUP 1.....................$ 33.90 23.00

GROUP 2.....................$ 26.75 23.00

GROUP 1: Power Cranes, Draglines, Derricks, Shovels, Gradalls, Mechanics, Tractor Highlift, Tournadozer, Concrete Mixers with Skip, Tournamixer, Two-Drum Machine, One-Drum Hoist with Tower or Boom, Cableways, Tower

Machines, Motor Patrol, Boom Tractor, Boom or Winch Truck, Winch or Hydraulic Boom Truck, Truck Crane, Tournapull, Tractor Operating Scoops, Bulldozer, Push Tractor, Asphalt

Planer, Finishing Machine on Asphalt, Large Rollers on

Earth, Rollers on Asphalt Mix, Ross Carrier or Similar

Machine, Gravel Processing Machine, Asphalt Plant Engineer, Paver Operator, Farm Tractor with Half Yard Bucket and/or

Backhoe Attachments, Dredge Engineer, or Dredge Operator, Central Mix Plant Engineer, CMI or Similar Type Machine, Truck or Skid Mounted Concrete Pump, Tower Crane, Engine or

Rock Crusher Plant, Concrete Plant Engineer, Ditching

Machine with Dual Attachment, Tractor Mounted Loaders, Cherry Picker, Hydro Crane, Standard or Dinkey Locomotives, Scoopmobiles, Euclid Loader, Soil Cement Machine, Back

Filler, Elevating Machine, Power Blade, Drilling Machines

Including Well Testing, Caissons, Shaft or Any Similar Type

Drilling Machines, Motor Driven Paint Machine, Pipe

Cleaning Machine, Pipe Wrapping Machine, Pipe Bending

Machine, Apsco Paver, Boring Machine, (Equipment Greased), Barber-Greene Loaders, Formless Paver, (Well Point System), Concrete Spreader, Hydra Ax, Span Saw and Similar Types, Marine Scoops, Brush Mulcher, Brush Burner, Mesh Placer, Tree Mover, Helicopter Crew (3), Piledriver - Skid or

Crawler, Stump Remover, Root Rake, Tug Boat Operator, Refrigerating Machine, Freezing Operator, Chair Cart-Self

Propelled, Hydra Seeder, Straw Blower Power Sub Grader, Bull Float, Finishing Machine, Self-Propelled Pavement

Breaker (Backhoe Attached), Lull (or Similar Type Machine), Two Air Compressors, Compressors Hooked in Maifold, Overhead Crane, Chip Spreader, Mud Cat, Sull-Air Fork Lifts

(Except When Used For Landscaping Work), Soil Stabilazer

(Seaman Tiller, Bo Mag, Rago Gator and Similar Types or

Equipment), Tube Float, Spray Machine, Curing Machine, Concrete or Asphalt Milling Machine, Snooper Truck Operator.

GROUP 2: Concrete Mixers Without Skips, Rock Crusher, Ditching Machine Under 6', Curbing Machine, One Drum

Machines without Tower or Boom, Air Tugger, Self-Propelled

Concrete Saw, Machine-Mounted Post Hole Digger, Two to Four

Generators, Water Pumps, or Welding Machines within 400 ft., Air Compressor 600 cu. ft. and Under, Rollers on

Aggregate and Seal Coat Surfaces, Fork Lifts (When Used For

Landscaping Work, Concrete and Blacktop Curb Machine, Farm

Tractor with less than Half Yard Bucket, One Water Pump, Iolers, Air Valves or Steam Valves, One Welding Machine, Truck Jack, Mud Jack, Gunnite Machine, House Elevators when used for Hoisting Material, Engine Tenders, Wagon Drill, Flex Plane, Conveyor, Siphons and Pulsometer, Switchman, Fireman on Paint Pots, Fireman on Asphalt Plants, Distributor Operators on Trucks, Tampers, Self-Propelled

Power Broom, Striping Machine (Motor Driven), Form Tamper, Bulk Cement Plan Equipment Greaser, Deck Hands, Truck Crane

Oiler Driver, Cement Blimps, Form Grader, Temporary Heat, Throttle Valve, Farm Tractor, Super Sucker (And Similar

Type of Equipment).

FOOTNOTE: Employees operating booms from 149 ft. to 199 ft.

including jib, shall receive an additional seventy five cents (.75) per hour above the rate. Employees operating booms over 199 ft. including jib, shall receive an additional one dollar and twenty five cents ($1.25) per hour above the regular rate.

IRON0022-003 06/01/2024

CLAY, DAVIESS, GREENE, KNOX, LAWRENCE, MARTIN, MONROE,

MONTGOMERY, OWEN, PARKE, PUTNAM, SULLIVAN, VERMILLION AND VIGO

COUNTIES

Rates Fringes

IRONWORKER.......................$ 36.70 26.09

The following holidays shall be observed: New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day and the day after Thanksgiving and Christmas Day. Any holiday which occurs on a Sunday shall be observed the following Monday, unless the legal observance of these holidays is changed by law.

IRON0103-003 04/01/2024

IRONWORKER.......................$ 35.34 25.75

LABO0204-002 06/01/2024

CLAY, GREENE, OWEN, PARKE, PUTNAM, SULLIVAN, VERMILLION, and

Laborers:

Caisson and Tunnel Work in

Compressed and Free Air

GROUP 1....................$ 23.18 16.00

GROUP 2....................$ 23.93 16.00

GROUP 3....................$ 24.18 16.00

GROUP 4....................$ 24.18 16.00

LABORERS

GROUP 1....................$ 26.93 18.00

GROUP 2....................$ 27.68 18.00

GROUP 3....................$ 28.43 18.00

LABORER CLASSIFICATIONS

GROUP1: Building and construction laborers; Scaffold builders (other than for masons or plasterers); Mechanic tenders; Flag & signal person; Window washers & cleaners;

Waterboys & toolhousemen; Railroad workers; Masonry wall washers (interior & exterior); Curing compound; All portable water pumps with discharge up to 3 inches;

Waterproofing; Handling of creosote lumber or like treated material (excluding railroad material); Asphalt rakers & lutemen; Kettlemen; Air tool operators and all pneumatic tool operators; Air & electric vibrators & chipping hammer operators: Earth compactors; Jackmen & sheet men working ditches deeper than 6 ft. in depth; Laborers working ditches 6 ft. in depth or deeper; Assembly of unicrete pump; Tile layers (sewer or field) & sewer pipe layer

(metallic or non-metallic); Motor-driven wheelbarrows & concrete buggies; Hyster operators; Pumpcrete assemblers;

Core drill operator; Cement, lime or silia clay handlers

(bulk or bag); Handling of toxic materials damaging to clothing; Pneumatic spikers; Deck engine & winch operators:

Water main & cable ducking (metallic/non-metallic); Screed man or screw operator on asphalt paver; Chain saw and demolition saw operators; Concrete conveyor assemblers;

Asbestos removal; Hazardous waste removal.

GROUP 2: Plasterers' tenders; Mortar mixers; Welders

(acetylene or electric); Cutting torch or burner; Cement nozzle laborers; Cement gun operators; Scaffold builders when working for plasterers and for masons; Water blast machine operators.

GROUP 3: Dynamite men; Mason Tenders; Drillers-air track or wagon drilling for explosives

LABORERS CLASSIFICATIONS For CAISSON And TUNNEL WORK In

COMPRESSED And FREE AIR

GROUP 1: Cage Tenders, Dump Men, Flagman, Signalman, Top

Laborers, Rod Men

GROUP 2: Concrete Repairmen, Lock Tenders (pressure side), Motor men, Muckers, Grout Machine, Track Layers, Air Hoist, Key Board, Agitator Car, Car Pushers, Concrete Laborers, Grout Laborers, Lock Tenders (free air side), Steel

Setters, Tuggers, Tuggers, Switchmen.

GROUP 3: Mucking Machine, Laser Beam, Liner Plate & Ring

Setter, Shield Drivers, Power Knife, Welders Burners, Pipe

Jacking Machine, Skinners, Maintenance Technician, Miner, Bricklayer Tenders, Concrete Blowers, Drillers, Erectors, Form Men, Jackhammermen, Mining Machine.

GROUP 4: Dynamite Men, Drillers air track or wagon drilling for explosives.

LABO0561-005 04/01/2023

GIBSON, POSEY, VANDERBURGH and WARRICK COUNTIES

Laborers:

GROUP 1.....................$ 27.12 18.10

GROUP 2.....................$ 27.42 18.10

GROUP 3.....................$ 28.62 18.10

GROUP 4.....................$ 28.87 18.10

LABORER CLASSIFICATIONS

GROUP 1: Building & Construction Laborers; Scaffold Builders

(other than for Masons or Plasterers); Ironworker Tender;

Mechanic Tender; Civil Engineer Tender; Rodmen and

Chainmen; Signalmen and Flagman, Window Washer & Cleaner;

Waterboy and Toolhouseman; Roofer Tender; Railroad Worker;

Masonry Wall Washer (Interior & Exterior); Cement Finisher

Tender; Carpenter Tender; All Other Tenders not listed;

Portable Water Pump with discharge up to 3""; Wiremesh; Fire

Prevention; Fire Watch; Fire Stop Tender

GROUP 2: Waterproofing; Handling of creosote Lumber or like treated material (Excluding Railroad Material); Asphalt

Raker & Luteman; Kettleman; handling and removal Hazardous materials damaging to clothing; Air Tool Operator;

Vibrator; Chipping Hammer Operator and all pneumatic tool operator and earth compactor; Jack Man & Sheeting Man

Working in Ditches 6 Feet in depth or deeper; Laborers working ditches six (6) feet in depth or deeper; Assembly of Unicrete Pump; Chain Saw Operator; Water line layers, five (5) feet outside the building foundation; Tile layers

(Sewer or Field); Sewer Pipe Layer (Metallic and

Non-metallic) five (5) feet outside the building; Motor

Driven Wheelbarrow & Concrete Buggy; Hyster Operator; Grout pump operator; Pump crete Assembler; Conveyor Assembler;

Core Drill Operator; Cement/Lime/Silica Clay Handler (Bulk or Bar); Pneumatic Spiker; Deck/Engine/Winch Operator;

Water Main & Cable Decking (Metallic or Non-metallic);

Remote Controlled Compactor

GROUP 3: Plasterer Tender; Mason Tender; Mortar Mixer; Welder

(Acetylene or Electric); Cutting Torch or Burner; Cement

Gun Operator; Scaffold Builder (When working for Plasterer or Mason)

GROUP 4: Dynamite Man

PAIN0156-002 04/01/2024

Painters:

BRUSH & ROLLER..............$ 29.62 18.32

DRYWALL FINISHERS...........$ 30.37 19.32

SPRAY, SANDBLAST, POWER

TOOLS, WATERBLAST & STEAM

CLEANING....................$ 30.62 19.32

FOOTNOTE A:

All Structures over 40? $0.75/ hour above base wage

All Structures over 75? $1.50/ hour above base wage

All Structures over 100? $2.50/ hour above base wage

PAIN0197-002 06/01/2024

CLAY, GREENE, OWEN, PARKE, PUTNAM, SULLIVAN, VERMILLION AND

VIGO COUNTIES:

Painters:

Brush & Roller ............. $ 30.25 15.50

Drywall & Paper hangers

(with tools) ............... $ 31.25 15.50

Sandblasting. .............. $ 32.25 15.50 Spray & Pot Man. ........... $ 30.75 15.50

FOOTNOTE A: $1.00 premium for work on structures over 40 ft.

above floor/ground level

$2.00 premium for work on structures over 100 ft above floor/ground level

PAIN1165-007 06/01/2024

GIBSON, POSEY, VANDERBURGH, WARRICK COUNTIES

GLAZIER..........................$ 32.86 19.34

PAIN1165-012 01/01/2024

CLAY; GREENE; OWEN; PARKE; PUTNAM; SULLIVAN; VERMILLION and

VIGO COUNTIES

GLAZIER..........................$ 34.03 20.05

PLAS0075-001 06/01/2017

CLAY, OWEN, PARKE, PUTNAM, VERMILLION AND VIGO COUNTIES:

CEMENT MASON/CONCRETE FINISHER...$ 25.75 13.50

PLAS0075-002 06/01/2017

GREENE and SULLIVAN COUNTIES

CEMENT MASON/CONCRETE FINISHER...$ 28.50 13.50

PLAS0566-001 04/01/2018

CEMENT MASON/CONCRETE FINISHER...$ 26.30 16.91

PLAS0692-001 06/01/2024

AREA #46

CLAY, GIBSON, GREENE, OWEN, PARKE, POSEY, PUTNAM, SULLIVAN,

VANDERBURGH, VERMILLION, VIGO and WARRICK COUNTIES

Rates Fringes

PLASTERER........................$ 30.50 17.62

PLUM0136-002 04/01/2024

REMAINING COUNTIES

Rates Fringes

Plumbers and Pipefitters.........$ 43.67 21.35

PLUM0157-001 07/01/2024

CLAY, GREENE, PARKE, PUTNAM (Part), SULLIVAN, VERMILLION and

Plumbers and Pipefitters.........$ 44.45 22.50

PLUM0440-001 06/04/2024

PUTNAM COUNTY (EAST OF ROAD 43 EXCEPT TERRITORY ON A EAST MILE

RADIUS FROM THE COURT HOUSE)

Plumbers and Pipefitters.........$ 46.50 19.89

ROOF0106-001 04/01/2023

REMAINING COUNTIES:

Roofers:

COMPOSITION.................$ 31.60 19.43

SLATE & TILE................$ 31.60 19.43

ROOF0119-001 09/01/2024

PUTNAM COUNTY

Roofers:.........................$ 31.00 14.21

ROOF0150-002 07/01/2024

CLAY, GREENE, OWEN, PARKE, SULLIVAN, VERMILLION AND VIGO

COUNTIES

Rates Fringes

ROOFER...........................$ 30.00 18.30

SFIN0669-002 04/01/2024

SPRINKLER FITTER.................$ 45.40 27.29

SHEE0020-018 07/01/2023

CLAY, GREENE, OWEN, PARKE, PUTNAM, SULLIVAN, VERMILLION, and

Sheet metal worker...............$ 39.53 22.92

HVAC Duct Work

SHEE0020-019 07/01/2023

GIBSON, POSEY, VANDERBURGH, and WARRICK COUNTIES

Sheet metal worker...............$ 34.58 29.98

HVAC Duct Work

TEAM0135-006 04/01/2024

CLAY, GREENE OWEN, PARKE, PUTNAM, SULLIVAN, VERMILLION, and

Truck drivers:

GROUP 1.....................$ 32.10 .42+a+b

GROUP 2.....................$ 32.60 .42+a+b

GROUP 3.....................$ 32.80 .42+a+b

GROUP 4.....................$ 32.95 .42+a+b

GROUP 5.....................$ 33.45 .42+a+b

A: $36.40 PER DAY & 450.00 PER WEEK.

TRUCK DRIVER CLASSIFICATIONS:

GROUP 1: Single Axle Trucks seven (7) cu.yds. or less than ten and 0ne-half (10 1/2) tons, dumpsters, scoop-mobiles five (5) cu. yds. and under or less than seven and one-half

(7 1/2) tons, mixer trucks three (3) cu.yds. and under, air compressors and welding machines, including those pulled by separate units, batch trucks-wet or dry-2""34-E batches or less, truck driver helpers, warehousemen, mechanic's helpers, greasers and tiremen, all pick-up trucks and other vehicles. Drivers on dumpsters or similar dumpsters, mounted on four

(4) wheel truck rated two (2) cu.yds. or less, and small pallet type fork-lift operator and drivers on pallet jacks or similar type equipment.

GROUP 2: Drivers on tandem axle eighteen (18) cu.yds.or twenty- four (24) tons gross, six (6) wheel trucks, Koehring or similar dumpsters, tract trucks, Euclids, hug bottom dumps, tournapulls, tournatrailers, tournarockers, or similar equipment when used for transportation purposes under nine (9) cu.yds. or less than thirteen and one-half (13 1/2) tons, tandems and semi-trailer service trucks, mixer trucks over three (3) cu. yds. and including six and one-half (6

1/2) cu.yds., fork lift, four (4) wheel A frame trucks when used for transportation purposes, four (4) wheel winch trucks, pavement breakers, batch trucks - wet or dry - over

2 up to and including 4-""34-E"" batches two (2) men oil distributors, fork-lift under four (4) ton and vacuum trucks.

GROUP 3: Koehring or similar dumpsters, tract trucks, semi-trailer water trucks, Euclids, hug bottom dumps, tournapulls, tournatrailers, tournarockers, tractor trailers, tandems Q frame winch trucks, hydrolift trucks or similar equipment when used for transportation purposes, mixer trucks over six and one-half (6 1/2) cu.yds. batch trucks wet or dry over 4-""34-E"" batches single axle low boy trailers, and Contractor's mechanics when working on equipment operated by employees within this Bargaining

Unit. Six (6) wheel pole trailers and one (1) man oil distributors, fork- lift over four (4) ton and mobile mixers.

GROUP 4: Drivers on heavy equipment over sixteen (16) cu.yds. or twenty-four ton, such as Koehring or similar dumpsters, tract trucks, Euclids, hug bottom dumps, tournapulls, tournarockers or similar equipment wen used for transportation purposes, pole trailers over six (6) wheels, water pulls, low-boy trailers tandem axles, quad axle or more no-weight limitation, diseal and/or heavy equipment mechanics when working on equipment operated by employees with this Bargaining Unit.

GROUP 5: Mechanic furnishing his own tools.

TEAM0215-005 04/01/2024

GIBSON, POSEY, VANDERBURGH AND WARRICK COUNTIES:

Truck drivers:

GROUP 1.....................$ 27.08 21.45

GROUP 2.....................$ 27.54 21.45

GROUP 3.....................$ 27.76 21.45

GROUP 1 - Pickup Trucks, Winch Trucks, Warehouseman, Mechanic, Street sweepers, Single axle trucks

GROUP 2 - Tandem Trucks or Dump Trucks; Farm Tractor Pulling trailer; Bituminous Distributors, Pavement Breakers

GROUP 3 - Mixer Trucks, all types; Lowboys, all types; Semi-trucks, all types; All Tri-axle Dump Trucks; Articulated

End Dumps; End Dumps; Heavy Equipment Type Water Wagons;

Hazardous Waste Warehouseman; Hazardous Waste Driver; and

Drivers on equipment when not self-loaded or pusher loaded, such as Koehring or similar dumpsters, track trucks, Euclid bottom dump and hug bottom dump, Tournatrailers, Tournarockers or similar equipment.

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the

Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking.