Questions_Answered_W912LC-25-Q-0014.pdf

PDF 36 KB Posted

Attached to
High Density Mobile Storage System - Amendment 02
Solicitation number
W912LC-25-Q-0014
Issued by

About this file

This is a Questions and Answers document for solicitation W912LC-25-Q-0014 regarding a High Density Storage System for the Colorado Army National Guard.

The document clarifies that the system will be installed on a concrete floor with dual entry capability and must lock into the concrete on both sides. Due to water issues under the tent during storms, the system must be installed directly into the concrete rather than using raised flooring. The storage system will be used for automotive tools and parts. No union workers are required, and no specific seismic requirements were identified. Regarding eligibility, while vendors can represent large business manufacturers, the CAGE code for the contract award must belong to a small business as registered in SAM to be eligible for award.

View the file

Other files

Show all 11

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

W912LC-25-Q-0014 High Density Storage System

Questions and Answers

1. What is the floor for the system (eg, concrete slab) and its' thickness?

CONCRETE

2. Will the system be dual entry or single entry?

THE SYSTEM WILL BE DUEL ENTRY AND NEED THE ABILITY TO LOCK INTO THE CONCRETE

ON BOTH SIDES

3. What type of flooring is desired for the units (usually raised flooring with linoleum tile)?

THE SYSTEM WILL HAVE TO BE INSTALLED INTO THE CONCRETE, DUE TO WATER GETTING

ON TO THE FLOOR UNDER THE TENT DURING BAD STORMS (THIS WILL HAPPEN EVEN

AFTER THE NEW OUTER LINER IS PUT ON)

4. Are there any specific seismic requirements or seismic calculations required?

I AM NOT SURE WHAT THIS QUESTION IS ASKING, BUT I THINK THE ANSWER IS NO

5. Are union workers required?

NO

6. Are there any special storage needs (eg., parachutes, helmets, backpacks, ditty bags, weapons, etc.?)

AUTOMOTIVE TOOLS AND PARTS

7. We are a small Business, but the manufacture we Represent is a large business. Would we be disqualified from the award process on RFQ W912LC-25-Q-0014?

THE CAGE CODE FOR THE CONTRACT AWARD MUST BELONG TO A SMALL BUSINESS. IF

YOUR CAGE CODE REPRESENTS IN SAM THAT YOU ARE A SMALL BUSINESS THEN YOU

ARE ELIGIBLE FOR AWARD.

File details come from the government source that posted it. Updated .