01 45 01.01 Additional Quality Control Personnel.pdf

SECTION 01 45 01.01

ADDITIONAL QUALITY CONTROL PERSONNEL

05/10

PART 1: GENERAL

1.1 GENERAL

This specification supplements Section 01 45 01 USACE QUALITY CONTROL and is intended to be read in conjunction with that Section.

This specification establishes the requirements for additional Quality Control Personnel which shall be part of the contractors Quality Control Staff.

1.2 PAYMENT

Separate payment will not be made for providing and maintaining an effective Quality Control program, and all associated costs will be included in the applicable Bid Schedule unit or lump-sum prices.

PART 2: PRODUCTS

Not Used

PART 3: EXECUTION

3.1 QUALITY CONTROL ORGANIZATION

3.1.1 CQC Personnel

In addition to CQC personnel specified elsewhere in the contract, provide as part of the CQC organization additional specialized personnel to assist the CQC System Manager as identified in the table below. Only those personnel specifically identified with a check in column a. in the table below are required.

These individuals must be directly employed by the prime Contractor and may not be employed by a supplier or subcontractor on this project; be responsible to the CQC System Manager; be physically present at the construction site during work on their areas of responsibility, and have the necessary education and/or experience in accordance with the experience matrix listed herein.

These individuals must have no other duties other than quality control unless the block in column d. in the table is checked. A single person may not cover more than one area.

SECTION 01 45 01.01 ADDITIONAL QUALITY CONTROL PERSONNEL 05/10

Additional Quality Control Personnel

a. b. c. d.

Check if Required Area Duties and Qualifications

Allowed Other Duties

Civil Graduate Civil Engineer or equivalent with 2 years experience in the type of work being performed on this project

Concrete, Pavements and Soils

Materials Technician with 3 yrs experience for the appropriate area

Mechanical Graduate Mechanical Engineer or equivalent with 2 yrs experience in the type of work

Mechanical Technician

Technician/Junior Engineers with 2 yrs experience for the appropriate area

Electrical Graduate Electrical Engineer or equivalent

Electrical – Comm/IT

Graduate Electrical Engineer or equivalent with 2 yrs specialized experience in Information and Communication system construction and installations

Electrical Technician

Technician/Junior Engineers with 2 yrs experience for the appropriate area

Structural Graduate Structural Engineer or equivalent

Architectural Graduate Architect or equivalent with 2 yrs experience in the type of work being performed on this project

Environmental

Graduate Environmental Engineer or equivalent with 2 yrs experience in the type of work being performed on this project

Submittal Control Officer

Submittal Clerk with 1 yr experience

Occupied family housing

Person, customer relations type, coordinator experience

SECTION 01 45 01.01 ADDITIONAL QUALITY CONTROL PERSONNEL 05/10

Additional Quality Control Personnel

a. b. c. d.

Check if Required Area Duties and Qualifications

Allowed Other Duties

Testing, Adjusting and Balancing (TAB)

Specialist must be a member of AABC or an experienced technician of the firm certified by the NEBB

CADD Operator or Draftsman

Three (3) years experience in the CADD language to be used for the production of the shop drawings and as-built drawings

Design Quality Control Manager

Registered Architect or Professional Engineer or equivalent with 2 yrs experience managing design quality

-- End of Section --