AMENDMENT 01 DRAFT SOLICITATION - W912DY26RA030.pdf

DRAFTSECTION

15A. NAME AND

ADDRESS

OF OFFEROR

SOLICITATION, OFFER, AND AWARD 1. This Contract is a Rated Order under the Defense Priorities and Allocations System (DPAS) - Code of Federal Regulations - at 15 CFR 700.

RATING PAGE OF PAGES

2. CONTRACT NUMBER 3. SOLICITATION NUMBER 4. TYPE OF SOLICITATION 5. DATE ISSUED 6. REQUISITION/PURCHASE NUMBER

CODE7. ISSUED BY 8. ADDRESS OFFER TO (If other than item 7)

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

9. Sealed offers in original and copies for furnishings the supplies or services in the Schedule will be received at the place specified in item 8, or if hand carried, in the depository located in until local time

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision Number 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

10. FOR

INFORMATION

CALL:

A. NAME B. TELEPHONE (NO COLLECT CALLS)

AREA CODE NUMBER EXTENSION

C. EMAIL ADDRESS

11. TABLE OF CONTENTS

(X) DESCRIPTION PAGE(S) (X) SECTION PAGE(S)DESCRIPTION

A B C D E F G H

I

J

K

L

M EVALUATION FACTORS FOR AWARD

INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

REPRESENTATIONS, CERTIFICATIONS AND OTHER

STATEMENTS OF OFFERORS

PART IV - REPRESENTATIONS AND INSTRUCTIONS

LIST OF ATTACHMENTS

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

CONTRACT CLAUSESSOLICITATION/CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/COSTS

DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

PACKAGING AND MARKING

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

CONTRACT ADMINISTRATION DATA

SPECIAL CONTRACT REQUIREMENTS

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

OFFER (Must be fully completed by offeror)

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause Number 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

10 CALENDAR DAYS (%) 20 CALENDAR DAYS (%) 30 CALENDAR DAYS (%) CALENDAR DAYS (%)

DATEAMENDMENT NUMBERAMENDMENT NUMBER DATE

CODE FACILITY 16. NAME AND THE TITLE OF PERSON AUTHORIZED TO SIGN OFFER

(Type or print)

15B. TELEPHONE NUMBER

AREA CODE NUMBER EXTENSION

15C. CHECK IF REMITTANCE ADDRESS IS

DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

17. SIGNATURE 18. OFFER DATE

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL OPEN COMPETITION UNDER THE

UNITED STATES CODE AT:

10 U.S.C. 3204(a) ( )41 U.S.C. 3304(a)

24. ADMINISTERED BY (If other than Item 7)

26. NAME OF CONTRACTING OFFICER (Type or print)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition is unusable

23. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

25. PAYMENT WILL BE MADE BY

27. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

28. AWARD DATE

CODE

ITEM

STANDARD FORM 33 (REV. 12/2022)

Prescribed by GSA - FAR (48 CFR) 53.214 (c)

SEALED BID (IFB) INVITATION FOR BID

NEGOTIATED (RFP) REQUEST FOR

PROPOSAL

(Hour) (Date)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

Created On:

18 Jun 2026, 14:46 PM Central Daylight Time

Section A - Solicitation/Contract Form

Utility Monitoring & Control Systems (UMCS) VI MATOCInstrument Name:

EXECUTIVE SUMMARY

In accordance with (IAW) Executive Order 14275, "Restoring Common Sense to Federal Procurement," the Government has transitioned from the legacy Federal Acquisition Regulation (FAR) to the Revolutionary FAR Overhaul (RFO). This initiative aims to streamline the acquisition process by returning the regulatory framework to its statutory roots and eliminating non-essential requirements. Phase 1 implementation became effective on February 1, 2026, via various class deviations. The full text of the RFO is available at https://www.acquisition.gov/far-overhaul.

Furthermore, specific DFARS class deviations and revisions related to the overhaul can be accessed at https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html. Offerors are responsible for reviewing these updated standards, as they govern the requirements and clauses applicable to this solicitation and any resulting contract.

A.1. OBJECTIVE. The purpose of this acquisition is to obtain qualified Contractors to provide Procurement and Installation (P&I) and Maintenance and Service (M&S) support for Facility Related Control Systems (FRCS) to ensure reliable performance and lifecycle sustainment of mission-critical systems supporting U.S. Army and Department of Defense (DoD) facilities.

This requirement supports full lifecycle FRCS capabilities, including design, procurement, installation, maintenance, and services for systems such as Unified Monitoring and Control Systems (UMCS); brand-name Heating, Ventilation and Air Conditioning systems; Supervisory Control and Data Acquisition; Fire Alarm and life safety systems; automated control and utility systems; power generation systems; Electronic Security Systems; and related security and force protection measures, as detailed in the Performance Work Statement.

Performance locations include DoD installations and other Government facilities throughout the Contiguous United States (CONUS), Alaska, Hawaii, and outlying areas, as well as Outside the Contiguous United States (OCONUS) to include Bahrain, Belgium, Brazil, Costa Rica, Ecuador, Gabon, Germany, Georgia, Greece, Haiti, India, Indonesia, Italy, Iraq, Jamaica, Japan, Kazakhstan, Kuwait, Malaysia, Mali, Montenegro, Norway, Poland, Republic of Korea, Romania, Saudi Arabia, Serbia, Suriname, Tanzania, United Arab Emirates, and United Kingdom.

Other foreign jurisdictions may be added to the geographic scope of the base Multiple Award Task Order Contract (MATOC) after preparing a Justification and Approval (J&A) for an out-of-scope modification to add a country in IAW RFO Part 6, Competition Requirements, for approval by the appropriate approving authority. This will include verification that all Contractors within the MATOC award pool can comply with the applicable requirements for the country to be added.

A.2. CONTRACT AWARD. The U.S. Army Corps of Engineers, Huntsville Engineering and Support Center (CEHNC), intends to solicit and award a MATOC using full and open competition with a small business reserve suite.

W912DY26RA030

https://www.google.com/url?q=https%3A%2F%2Fwww.acquisition.gov%2Ffar-overhaul https://www.google.com/url?q=https%3A%2F%2Fwww.acq.osd.mil%2Fdpap%2Fdars%2Fdfars_far_overhaul_class_deviations.html

Multiple awards are appropriate for this effort due to the volume, scope, complexity, geographic locations, and frequency of anticipated task orders, as well as the need to maintain competition throughout the ordering period IAW DFARS 216.507, Additional Ordering Procedures for Multiple- Award Contracts (DEVIATION 2026-O0045). The Government intends to award contracts to all qualifying offerors, defined as responsible offerors submitting technically acceptable proposals that conform to solicitation requirements and for whom the Contracting Officer has no reason to believe pricing would be other than fair and reasonable.

This acquisition will be awarded under North American Industry Classification System (NAICS) code 541512, Computer Systems Design Services.

A.3. CONTRACT TYPE. The MATOC and Individual Task Order awards will consist of Firm Fixed Price (FFP) Contract Line-Item Numbers (CLINs).

A.4. CONTRACT TERM. The anticipated total ordering period is 84 months, which will consist of a base period of 36 months with two, 24-month optional periods. The Government has an approved deviation IAW RFO 17.204-1, Exercise of Options, allowing award pursuant to RFO 15.104(b)(1)(ii) (3), Establishing Competitive Evaluation Factors and Significant Subfactors, and including optional ordering periods without evaluating pricing at the MATOC base level.

Pricing will be evaluated at the task order level only. The Government reserves the right to make staggered awards. Contracts awarded after the initial award may have an initial ordering period shorter than the full base period but will end on the same date as contracts awarded. Option periods will be the same for all awardees.

The Government intends to award without discussions; however, it reserves the right to conduct discussions, if determined to be in the Government's best interest, with offerors remaining in the competitive range after initial awards have been made.

Evaluation of Options: Maximum rates will not be evaluated at the MATOC base level, but will be evaluated for each individual task order, except when determined not to be in the Government's best interest IAW RFO 17.202(b)(1). The MATOC will include RFO 52.217-9, Option to Extend the Term of the Contract, for optional ordering periods, and RFO 52.217-8, Option to Extend Services, which allows for an extension of up to six months. Note: The maximum potential contract duration, including the base period and all available options, is 90 months. If an option period is not exercised and RFO 52.217-8 is utilized to extend services, the maximum rates from the immediate prior period shall apply to the extension.

Note. A business that qualifies as small at the time of proposal submission for the base MATOC is generally considered small for the life of that contract. IAW RFO 19.301(a)(3) recertification of size and small business program status for long-term contracts is required within 60 to 120 days prior to the end of the fifth year of the contract; and within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

A.5. CONTRACT CAPACITY. The maximum contract capacity is over (if $5.1 Billion 90 months all options are exercised) for this acquisition. Capacity will be shared among all MATOC holders

W912DY26RA030

IAW ordering procedures outlined in this solicitation. CLIN values represent estimated capacity amounts only, and the Government reserves the unilateral right to move capacity between CLINs and ordering periods, as necessary. Section B within this solicitation will remain blank and will be completed in its entirety at time of contract award by the Contracting Officer. Individual contract capacities will not be assigned.

A.6. CONTRACT ORDERING. Task orders will be issued against the base MATOC IAW RFO Subpart 16.5, Indefinite-Delivery Contracts, and the ordering procedures set forth in Section H.4 - Method of Ordering. All task orders exceeding the micro-purchase threshold will be awarded on a competitive basis unless an exception applies IAW RFO 16.507-6, Exceptions to Fair Opportunity.

A.7. MATOC SUITE AND TASK ORDER COMPETITION.

The selection of the Base MATOC Suite: The Government will issue a single unrestricted solicitation resulting in MATOCs that include a small business reserve suite.

Task Order Selection and Competition: At the task order level. The Contracting Officer will conduct a Rule of Two analysis to determine whether a requirement will be set aside for competition among the small business reserve suite holders IAW RFO 19, Small Business. In support of this determination, the Contracting Officer will also use a Decision Matrix as a tool to evaluate factors such as technical complexity, size, risk, performance location (including OCONUS considerations), and schedule constraints. Dollar value alone will not be determinative in assessing suitability for small business competition.

Task orders will be competed either unrestricted among all MATOC holders or set aside for small business MATOC holders, as appropriate. Fair opportunity will be provided to all eligible MATOC holders unless an exception applies IAW RFO 16.507-6, Exceptions to Fair Opportunity, and the rationale for any such exception will be documented.

For OCONUS task orders, small business participation will be considered after evaluation of applicable Status of Forces Agreements (SOFA) and other international agreements.

A.8. WAGE DETERMINATIONS. Individual task orders to be issued under this contract primarily are for services as defined by RFO 37.001, "Definitions". For task orders performed within the United States, services are subject to the Service Contract Act (See RFO 52.222-41, "Service Contract Labor Standards"). For task orders performed outside the United States and its outlying areas, the Contractor shall comply with all local labor laws, regulations, and labor standards in accordance with DFARS 222.72 (DEVIATION 2026-O0040) and DFARS 252.222-7002, Compliance with Local Labor Laws (Overseas).

In the event that individual service task orders contain minor incidental work subject to the Construction Wage Rate Requirement (formerly known as the Davis-Bacon Act), RFO 52.222-6 "Construction Wage Rate Requirements", will apply. Wage Decisions/Determinations for the geographic area where the awarded work is to be performed will be in the individual task order. A copy of the decision/ determination is available at https://sam.gov. The labor rates in effect at the time a task order is awarded will remain in effect through completion of the project, unless modified due to an increase in the Department of Labor wage rates.

A.9. MINIMUM GUARANTEE. The Government's minimum guarantee of extends $2,000.00 throughout the ordering period of the MATOC. Funding for this minimum guarantee will be obligated on the first task order, issued at the time of the base contract award. This is a minimum ordering amount, not a minimum payment. Payment under subsequent task order award(s) in an amount meeting/exceeding the minimum guarantee satisfies the minimum guarantee. The minimum guarantee task order may then be de-obligated and closed.

A.10. ON-RAMP/OFF-RAMP/DORMANT STATUS. The Government may evaluate the market and performance of MATOC holders during the ordering period to determine whether it is in the Government's interest to conduct on-ramp, off-ramp, or dormant status procedures IAW RFO 16.504-4, On-Ramps and Off-Ramps.

On-Ramp: During an on-ramp, the Government may solicit, evaluate, and award contracts to addition technically qualified firms. On-ramp solicitations will be conducted using substantially the same proposal instructions, evaluation criteria, and terms and conditions as the original solicitation. Any additional awards will be treated as staggered awards and integrated into the existing MATOC ordering framework.

Off-Ramp: The Contracting Officer may remove a Contractor from the MATOC for reasons including, but not limited to, poor performance, failure to compete or submit acceptable proposals for task orders for which the Contractor is qualified, or failure to comply with material contract requirements. Off-ramp procedures will not affect task orders awarded prior to removal.

Dormant Status: Due to extenuating circumstances not related to performance, a MATOC holder may request to be placed in a temporary dormant status. Contractors in dormant status will not be eligible to compete for new task orders during the approved period but may continue to perform on existing task orders. Dormant status will be approved for a defined, finite period, after which the Contractor will be expected to resume competition for task orders.

Detailed procedures governing on-ramp, off-ramp, and dormant status procedures are addressed in Section H.17 - On-Ramp/ Off Ramp/ Dormant Status Procedures, of this solicitation.

A.11. SYSTEM OF AWARD MANAGEMENT (SAM). Competition for inclusion in the MATOC will be sought, promoted, and sustained by querying the SAM, synopsizing proposed actions, and posting the solicitation in the Government-wide point of entry website (https://sam.gov/). Offerors must be registered in SAM to be eligible for award. See RFO 52.204-7, System for Award Management - Registration.

The Government will retrieve Representations and Certifications from SAM once proposals are received.

W912DY26RA030

https://sam.gov https://sam.gov/

A.12. CYBERSECURITY MATURITY MODEL CERTIFICATION (CMMC) 2.0 PROGRAM. The DoD CMMC 2.0 program establishes cybersecurity requirements for DoD Contractors that handle Federal Contract Information (FCI) or Controlled Unclassified Information (CUI). Offerors must comply with applicable CMMC requirements, as implemented through DFARS 252.204-7021, Contractor Compliance with the Cybersecurity Maturity Model Certification Level Requirements, and DFARS 252.204-7025, Notice of Cybersecurity Maturity Model Certification Level Requirements.

The required certification level for this requirement is Level 2 (Self-Assessment).

A.13. OCONUS REQUIREMENTS. MATOC holders will be required to comply with all rules and regulations for the respective task order performance location(s) (see A.1. Objective of the Executive Summary), and have the ability to obtain all applicable licenses, certificates or other documentation as defined in H.18 - Special Instructions for Task Order Locations Outside the Contiguous United States Locations, of this solicitation and/or outlined in the task order requirements.

A.14. DEFENSE BASE ACT INSURANCE (DBA). For contract performance outside the 50 United States and the District of Columbia, including U.S. territories, the Contractor must obtain DBA insurance as required by 42 U.S.C. 1651 and RFO 52.228-3, Workers' Compensation Insurance (Defense Base Act). The Contractor provide proof of coverage and ensure DBA shall requirements flow down to all applicable subcontracts. Subsequent task orders will include DBA insurance requirements as applicable. DBA insurance must be procured through the Department of Labor's approved provider, unless otherwise specified (See Section H.9 - DBA Insurance, for further information).

A.15. CONTRACT AUTHORIZATION. The U.S. Army Engineering and Support Center, Huntsville is the only authorized ordering office and no other agency can make changes to the Base Contract. Other USACE offices, upon authorization from the U.S. Army Engineering and Support Center, Huntsville may be delegated this authority, in which case, an advance written notice will be given to the contractors. The U.S. Army Engineering and Support Center may also transfer task orders to other USACE offices for administration. Only a warranted Contracting Officer acting within their delegated limits has the authority to issue modifications or otherwise change the terms and conditions of this contract. If an individual other than the Contracting Officer attempts to make changes to the terms and conditions of this contract you shall not proceed with the change and shall immediately notify the Contracting Officer.

A.16. QUESTIONS. Questions relative to this solicitation be submitted per instructions in shall Section L.4 - Questions (See Attachment 5 - Instructions to Offerors).

A.17. SUBMISSION REQUIREMENTS. Proposal submission be submitted per the shall instructions at Section L.5 - Proposal Submission (See Attachment 5 - Instructions to Offerors).

*** END OF NARRATIVE ***

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price

Amount

0001 UMCS To provide UMCS and other Electronic Data Control Systems to include BAS; FAS; SCADA; HVAC; and other similar services and requirements.

The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

0002 ESS To provide ESS and other Electronic Data Control Systems to include BAS;

FAS; SCADA; HVAC; and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement Pricing Arrangement: Firm Fixed Price

1 Job

0003 Maintenance-Services (Preventative) To provide preventative maintenance and services for various Electronic Data Control Systems to include UMCS; ESS;

BAS; FAS; SCADA; HVAC; and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

0004 Maintenance-Services (Corrective Repair) To provide corrective repair maintenance and services for various Electronic Data Control Systems to include UMCS; ESS;

1 Job

BAS; FAS; SCADA; HVAC; and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

0005 OCONUS - European Region To provide UMCS and other Electronic Data Control Systems to include BAS; FAS; SCADA;

HVAC; and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

0006 OCONUS - Pacific Region To provide UMCS and other Electronic Data Control Systems to include BAS; FAS; SCADA;

HVAC; and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement Pricing Arrangement: Firm Fixed Price

1 Job

0007 OCONUS - MidEast Region To provide UMCS and other Electronic Data Control Systems to include BAS; FAS; SCADA;

HVAC; and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

0008 OCONUS - Caribbean Region To provide UMCS and other Electronic Data Control Systems to include BAS; FAS; SCADA;

HVAC; and other similar services and requirements. The contractor shall

1 Job perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

0009 Service Contract Reporting IAW DFARS 252.204-7023, the Contractor shall report on the services performed (including any first-tier subcontracts) under this contract at https://sam.gov. The reporting period will be the period of performance not to exceed 12 months ending 30 September of each Government Fiscal year and must be reported by 31 October of each calendar year.

Pricing Arrangement: Firm Fixed Price

1 Job

0010 Minimum Guarantee The Government's minimum guarantee of $2,000.00 extends throughout the period of performance of the MATOC. This is a minimum ordering amount, not a minimum payment.

Payment under subsequent task order award(s) in an amount meeting/exceeding the minimum guarantee satisfies the minimum guarantee. The minimum guarantee task order may then be de-obligated and closed.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Utility Monitoring and Control Systems To provide Utility Monitoring and Control Systems (UMCS) and other Electronic Data Control Systems to include Building Automation System, (BAS); Fire Alarm Systems, (FAS): Supervisory Control and Data Acquisition, (SCADA); Heating, Ventilation, and Air Conditioning, (HVAC);

and other similar services and requirements. The contractor shall

1 Job attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

Option Line Item

Electronic Security Systems To provide Electronic Security Systems and other Electronic Data Control Systems to include Building Automation System, (BAS); Fire Alarm Systems, (FAS):

Supervisory Control and Data Acquisition, (SCADA); Heating, Ventilation, and Air Conditioning, (HVAC); and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Maintenance-Services (Preventative) To provide preventative maintenance and services for various Electronic Data Control Systems to include Utility Monitoring and Control Systems, (UMCS);

Electronic Security Systems, (ESS);

Building Automation System, (BAS); Fire Alarm Systems, (FAS): Supervisory Control and Data Acquisition, (SCADA);

Heating, Ventilation, and Air Conditioning, (HVAC); and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Maintenance-Services (Corrective Repair) To provide corrective repair maintenance and services for various Electronic Data Control Systems to include Utility Monitoring and Control Systems, (UMCS);

1 Job

Electronic Security Systems, (ESS);

Building Automation System, (BAS); Fire Alarm Systems, (FAS): Supervisory Control and Data Acquisition, (SCADA);

Heating, Ventilation, and Air Conditioning, (HVAC); and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

Option Line Item

OCONUS - European Region To provide Utility Monitoring and Control Systems (UMCS) and other Electronic Data Control Systems to include Electronic Security Systems, (ESS); Building Automation System, (BAS); Fire Alarm Systems, (FAS): Supervisory Control and Data Acquisition, (SCADA); Heating, Ventilation, and Air Conditioning, (HVAC);

and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

OCONUS - Pacific Region To provide Utility Monitoring and Control Systems (UMCS) and other Electronic Data Control Systems to include Electronic Security Systems, (ESS); Building Automation System, (BAS); Fire Alarm Systems, (FAS): Supervisory Control and Data Acquisition, (SCADA); Heating, Ventilation, and Air Conditioning, (HVAC);

and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement

1 Job

Pricing Arrangement: Firm Fixed Price

Option Line Item

OCONUS - MidEast Region To provide Utility Monitoring and Control Systems (UMCS) and other Electronic Data Control Systems to include Electronic Security Systems, (ESS); Building Automation System, (BAS); Fire Alarm Systems, (FAS): Supervisory Control and Data Acquisition, (SCADA); Heating, Ventilation, and Air Conditioning, (HVAC);

and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

OCONUS - Caribbean Region To provide Utility Monitoring and Control Systems (UMCS) and other Electronic Data Control Systems to include Electronic Security Systems, (ESS); Building Automation System, (BAS); Fire Alarm Systems, (FAS): Supervisory Control and Data Acquisition, (SCADA); Heating, Ventilation, and Air Conditioning, (HVAC);

and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Service Contract Reporting IAW DFARS 252.204-7023, the Contractor shall report on the services performed (including any first-tier subcontracts) under this contract at https://sam.gov. The reporting period will be the period of performance not to exceed 12 months ending 30 September

1 Job of each Government Fiscal year and must be reported by 31 October of each calendar year.

Pricing Arrangement: Firm Fixed Price

Option Line Item

UMCS To provide UMCS and other Electronic Data Control Systems to include BAS; FAS; SCADA; HVAC; and other similar services and requirements.

The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

ESS To provide ESS and other Electronic Data Control Systems to include BAS;

FAS; SCADA; HVAC; and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Maintenance-Services (Preventative) To provide preventative maintenance and services for various Electronic Data Control Systems to include UMCS; ESS;

BAS; FAS; SCADA; HVAC; and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Maintenance-Services (Corrective Repair) To provide corrective repair maintenance and services for various Electronic Data Control Systems to include UMCS; ESS;

BAS; FAS; SCADA; HVAC; and other

1 Job similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

Option Line Item

OCONUS - European Region To provide UMCS and other Electronic Data Control Systems to include BAS; FAS; SCADA;

HVAC; and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

OCONUS - Pacific Region To provide UMCS and other Electronic Data Control Systems to include BAS; FAS; SCADA;

HVAC; and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

OCONUS - MidEast Region To provide UMCS and other Electronic Data Control Systems to include BAS; FAS; SCADA;

HVAC; and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

OCONUS - Caribbean Region To provide UMCS and other Electronic Data Control Systems to include BAS; FAS; SCADA;

HVAC; and other similar services and

1 Job requirements. The contractor shall attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

Option Line Item

Service Contract Reporting IAW DFARS 252.204-7023, the Contractor shall report on the services performed (including any first-tier subcontracts) under this contract at https://sam.gov. The reporting period will be the period of performance not to exceed 12 months ending 30 September of each Government Fiscal year and must be reported by 31 October of each calendar year.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

THIS CLIN MAY ONLY BE EXERCISED

PURSUANT TO RFO 52.217-8. UMCS To provide UMCS and other Electronic Data Control Systems to include BAS; FAS;

SCADA; HVAC; and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

THIS CLIN MAY ONLY BE EXERCISED

PURSUANT TO RFO 52.217-8. ESS To provide ESS and other Electronic Data Control Systems to include BAS; FAS;

SCADA; HVAC; and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line

THIS CLIN MAY ONLY BE EXERCISED

PURSUANT TO RFO 52.217-8.

1 Job

Item

Maintenance-Services (Preventative) To provide preventative maintenance and services for various Electronic Data Control Systems to include UMCS; ESS;

BAS; FAS; SCADA; HVAC; and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

Option Line Item

THIS CLIN MAY ONLY BE EXERCISED

PURSUANT TO RFO 52.217-8.

Maintenance-Services (Corrective Repair) To provide corrective repair maintenance and services for various Electronic Data Control Systems to include UMCS; ESS;

BAS; FAS; SCADA; HVAC; and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

THIS CLIN MAY ONLY BE EXERCISED

PURSUANT TO RFO 52.217-8. OCONUS

- European Region To provide UMCS and other Electronic Data Control Systems to include BAS; FAS; SCADA; HVAC; and other similar services and requirements.

The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

THIS CLIN MAY ONLY BE EXERCISED

PURSUANT TO RFO 52.217-8. OCONUS

- Pacific Region To provide UMCS and other Electronic Data Control Systems to

1 Job include BAS; FAS; SCADA; HVAC; and other similar services and requirements.

The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

Option Line Item

THIS CLIN MAY ONLY BE EXERCISED

PURSUANT TO RFO 52.217-8. OCONUS

- MidEast Region To provide UMCS and other Electronic Data Control Systems to include BAS; FAS; SCADA; HVAC; and other similar services and requirements.

The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

THIS CLIN MAY ONLY BE EXERCISED

PURSUANT TO RFO 52.217-8. OCONUS

- Caribbean Region To provide UMCS and other Electronic Data Control Systems to include BAS; FAS; SCADA;

HVAC; and other similar services and requirements. The contractor shall perform all work in accordance with the attached Performance Work Statement.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

THIS CLIN MAY ONLY BE EXERCISED

PURSUANT TO RFO 52.217-8. Service Contract Reporting IAW DFARS 252.204- 7023, the Contractor shall report on the services performed (including any first-tier subcontracts) under this contract at https://sam.gov. The reporting period will be the period of performance not to exceed 12 months ending 30 September of each Government Fiscal year and must

1 Job be reported by 31 October of each calendar year.

Pricing Arrangement: Firm Fixed Price

Section C - Description/Specifications/Statement of Work

Requirements The purpose of this acquisition is to provide support for the Procurement and Installation of UMCS to include Heating, Ventilation, and Air Conditioning (HVAC), chiller/boiler systems installation and /or integration, Supervisory Control and Data Acquisition (SCADA) Systems, and other Automated Control Systems (ACS) including Fire Alarm Systems (FAS), life safety control systems, chemical / biological / radiological contaminant detection / filtration / response, utility (electric, gas, water) metering and Electronic Security Systems (ESS), and security and/or force protection measures such as, but not limited to, barriers, fencing, gates, window treatments, hardening, and lighting as described within the Performance Work Statement (PWS).

Product Service Code : J059 North American Industry Classification System (NAICS) : 541512

Product Service Code : J059 North American Industry Classification System (NAICS) : 541512

Product Service Code : J059 North American Industry Classification System (NAICS) : 541512

Product Service Code : J059 North American Industry Classification System (NAICS) : 541512

Product Service Code : J059 North American Industry Classification System (NAICS) : 541512

Product Service Code : J059 North American Industry Classification System (NAICS) : 541512

Product Service Code : J059 North American Industry Classification System (NAICS) : 541512

Product Service Code : J059 North American Industry Classification System (NAICS) : 541512

Product Service Code : J059 North American Industry Classification System (NAICS) : 541512

Product Service Code : J059 North American Industry Classification System (NAICS) : 541512

Section E - Inspection and Acceptance

DFARS Clauses Incorporated by Full Text

Number Title Effective Date

Alternate Deviation

Variation Effective Date

252.229-7003 Tax Exemptions (Italy). 2012-03

TAX EXEMPTIONS ( ITALY ) (MAR 2012)

(a) As the Contractor represented in its offer, the contract price, including the prices in subcontracts awarded under this contract, does not include taxes from which the United States Government is exempt.

(b) The United States Government is exempt from payment of Imposta Valore Aggiunto (IVA) tax in accordance with Article 72 of the IVA implementing decree on all supplies and services sold to United States Military Commands in Italy .

(1) The Contractor shall include the following information on invoices submitted to the United States Government:

(i) The contract number.

(ii) The IVA tax exemption claimed pursuant to Article 72 of Decree Law 633, dated October 26, 1972 .

(iii) The following fiscal code(s): ____[Contracting Officer must insert the applicable fiscal code

(s) for military activities within Italy : 80028250241 for Army, 80156020630 for Navy, or 91000190933 for Air Force].

(2)(i) Upon receipt of the invoice, the paying office will include the following certification on one copy of the invoice:

"I certify that this invoice is true and correct and reflects expenditures made in Italy for the Common Defense by the United States Government pursuant to international agreements. The amount to be paid does not include the IVA tax, because this transaction is not subject to the tax in accordance with Article 72 of Decree Law 633, dated October 26, 1972 An authorized United States Government official will sign the copy of the invoice containing this certification.

(ii) The paying office will return the certified copy together with payment to the Contractor. The payment will not include the amount of the IVA tax.

(iii) The Contractor shall retain the certified copy to substantiate non-payment of the IVA tax.

(3) The Contractor may address questions regarding the IVA tax to the Ministry of Finance, IVA Office, Rome (06) 520741.

(c) In addition to the IVA tax, purchases by the United States Forces in Italy are exempt from the following taxes:

(1) Imposta di Fabbricazione (Production Tax for Petroleum Products).

(2) Imposta di Consumo (Consumption Tax for Electrical Power).

(3) Dazi Doganali (Customs Duties).

(4) Tassa di Sbarco e d'Imbarco sulle Merci Transportate per Via Aerea e per Via Maritima (Port Fees).

(5) Tassa de Circolazione sui Veicoli (Vehicle Circulation Tax).

(6) Imposta di Registro (Registration Tax).

(7) Imposta di Bollo (Stamp Tax).

(End of clause)

Overall Contract Inspection/Acceptance Locations

0001 Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

0002 Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

0003 Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

0004 Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

0005 Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

0006 Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

0007 Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

0008 Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

0009 Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

0010 Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

1002 Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

2007 Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

DoDAAC: W912DY CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: In accordance with the Performance Work Statement.

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, KO CONTRACTING DIVISION

REDSTONE ARSENAL, AL 35898-0000

UNITED STATES

Section F - Deliveries or Performance

0001 1 JobQuantity

Address and POC Place of Performance DoDAAC: W501YX CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, REDSTONE ARSENAL AL 35898-0000 REDSTONE

ARSENAL, AL 35898-0000 UNITED STATES

Period of Performance From 31 Mar 2027 To 30 Mar 2030

0002 1 JobQuantity

Address and POC Place of Performance DoDAAC: W501YX CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, REDSTONE ARSENAL AL 35898-0000 REDSTONE

ARSENAL, AL 35898-0000 UNITED STATES

Period of Performance From 31 Mar 2027 To 30 Mar 2030

0003 1 JobQuantity

Address and POC Place of Performance DoDAAC: W501YX CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, REDSTONE ARSENAL AL 35898-0000 REDSTONE

ARSENAL, AL 35898-0000 UNITED STATES

Period of Performance From 31 Mar 2027 To 30 Mar 2030

0004 1 JobQuantity

Address and POC Place of Performance DoDAAC: W501YX CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, REDSTONE ARSENAL AL 35898-0000 REDSTONE

ARSENAL, AL 35898-0000 UNITED STATES

Period of Performance From 31 Mar 2027 To 30 Mar 2030

0005 1 JobQuantity

Address and POC Place of Performance

DoDAAC: W501YX

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE GATEWAY, REDSTONE ARSENAL AL 35898-0000 REDSTONE

ARSENAL, AL 35898-0000 UNITED STATES

Period of Performance From 31 Mar 2027 To 30 Mar 2030

0006 1 JobQuantity

Address and POC Place of Performance DoDAAC: W501YX CountryCode: USA

W2V6 USA ENG SPT CTR HUNTSVIL

300 SECURE…