REV 8-14-2025 ATT 3 - Navy Multi Locations RSOWMicrowaves Dehumidifiers.docx

UH Furnishings Program Statement of Work – Removal and Installation of Furnishings Navy, Multi Locations, Appliances REV 8-14-2025

1. GENERAL

1.1 The Contractor shall provide all necessary materials, equipment, labor, supervision, and management to: (1) coordinate delivery; (2) remove existing furniture from rooms; (3) deliver removed furniture to location specified; (4) load and unload new furniture; (5) place/install in designated rooms; (6) assemble items as required; (7) secure and store, as designated; and (8) properly dispose of all associated packaging/crating materials.

1.2 Awarded Contractor is responsible for verifying all existing field conditions, i.e., electrical power including, but not limited to, voltage, hertz, amperage, and outlets at each building.

1.3 The Technical Representative (TR) for this project is as shown in Table 1 of this document.

1.4 The contractor shall provide a digital color board of all furniture finishes and fabrics to the TR for reference, prior to manufacturing.

1.5 Upon final approval of the customer, the vendor shall reserve adequate quantities of fabrics from the manufacturer as soon as possible to avoid delays due to “out of stock” and/or “discontinued” fabrics.

1.6 If the awarded fabric is discontinued after award, the vendor shall contact the HNC PM to develop a path forward.

2. DELIVERY

DELIVERY TYPES:

· Staged Delivery – This type of delivery is selected for occupied buildings whereby the rooms must be emptied of old furnishings and reinstalled with the new furnishings by the end of each workday. The number of rooms that must be completed per day will be stated in the Table 1 of the Statement of Work (SOW). If there is a limited space for containers in the staging area, this will also be noted in the Table 1 of the Statement of Work. This information is important as it may dictate how the containers are loaded for delivery.

· Non-Staged Delivery – This type of delivery is selected typically for empty buildings whereby the entire building is accessible during the install dates listed in the contract. This is important because it will dictate how the items are loaded into the containers for shipment.

2.1 The Contractor shall contact the TR at least 15 working days prior to shipping to ensure that the building is ready. The Contractor shall coordinate item delivery from all sub-contractors and ship the goods only if the TR confirms that the building is ready. At this time, the Contractor shall also ensure they fully understand all security regulations for the installation and have started any required procedures to minimize the impact on the installation personnel.

2.2 In the event that a delay in delivery is requested by the TR, or if the Contractor is unable to confirm that the building is ready, the Contractor shall notify the Contracting Officer within 1 working day.

2.3 The Contractor shall provide the TR with a minimum of 48-hour notification as to the date and time that the trucks will be arriving. The Contractor shall also provide email notification as to the date and time the trucks will be arriving to: furnishinginvoices@usace.army.mil at least 48 hours prior to scheduled arrival time.

2.3 Contractor must ensure that the driver of the delivery vehicle has copies of the Delivery Order (contract) for the items being delivered in order to gain entry to the facility.

2.4 Drivers of the delivery vehicles shall not attempt to deliver any items before the scheduled delivery date. In the event the delivery date falls on a Saturday, Sunday, or federally recognized holiday, the delivery date shall be the next workday after the Saturday, Sunday, or holiday.

2.5 Shipping Label shall read as specified in Table 1 of this document.

2.6 Items shall be labeled with the building number(s) provided in Contract Line Item (CLIN) 0001, unless otherwise noted in this paragraph.

3. REMOVAL OF EXISTING FURNITURE

3.1 Contractor shall start removing existing items in the rooms between the hours specified in Table 1. The Contractor may work outside this time frame with prior approval of the TR.

3.2 If a furniture listing is not provided in Table 1, assume existing furniture to include some or all of the following: bed and mattress, wall unit, desk, chair, and chest.

3.3 Contractor shall deliver all removed furniture to location specified by the TR.

3.4 If the Contractor is unable to complete the removal and storage of items before end of the workday, the contractor will secure those items and ensure they are protected from the elements. If the items are moved to a different storage site overnight, the Contractor will be responsible for moving the items from the overnight storage site to its final location.

3.5 Contractor shall take care to ensure removed furniture is not damaged during removal, transport, and final disposition.

3.6 Contractor shall reference Table 1 below to determine if removed furnishings require palletizing and shrink wrapping. If required, this cost shall be included in the removal line of attachment 1.

3.7 After removal of existing furnishings, rooms shall be swept or vacuumed, as required by flooring type, before placement of new furnishings.

4. RECEIVE AND UNLOAD

4.1 Contractor shall start assembling and installing items in rooms upon completion of furniture removal, between the hours specified in Table 1. The Contractor may work outside this time frame with prior approval of the TR.

4.2 If the Contractor is unable to complete the assembly and placement of all unloaded items before end of the workday, the contractor will transport those items to a location designated by the TR for storage until the next workday. The Contractor will be responsible for moving the items from the overnight storage site to its designated position in the building.

4.3 The Contractor shall verify and inspect all items. Any deficiencies (damage/overage/shortage) shall be brought to the attention of the TR. The Contractor shall store damaged items in the location designated by the TR.

4.4 The Contractor shall maintain a complete file of all documents relating to each discrepancy. Copies of discrepancy reports shall be forwarded to the TR on a daily basis.

4.5 The Contractor shall repair or coordinate for replacement of damaged, defective, or missing items.

4.6 Additional items identified in Table 1 shall be picked up from location specified in Table 1, on the date and time specified by the TR, and installed. If these items have been picked up, but not installed, they must be handled in accordance with paragraph 3.2. above. If no items are identified in Table 1, then there are no items in storage that must be installed under this contract.

4.7 Mattresses and box springs (if applicable) shall be installed whether provided by the Contractor or by the Government, even if not noted in Table 1. If mattresses are provided by the Government, the Contractor shall pick up these items from the location specified by the TR and install in accordance with this Statement of Work.

5. PLACE AND INSTALL

5.1 Contractor shall place items in building(s) noted in CLIN 0001 of the contract. Items shall be placed in the rooms in accordance with the drawings attached to this Statement of Work. If no drawings are provided herein, the furniture shall be placed as directed by the TR. Information about the building may be found in Table 1.

5.2 The Contractor shall complete installation of furnishings under this Statement of Work in the time period specified in Table 1.

5.3 The contractor shall clean and polish all items that have been installed.

5.4 The Contractor shall ensure all light fixtures have the appropriate bulbs as identified in the contract as well as ensure they are in working order.

5.5 The Contractor shall remove all protective coverings off of electronics (such as protective film on the microwaves, TVs, and lamp shades, etc.).

5.6 The Contractor shall ensure that all stickers and labels are removed, and no adhesive residue remains on the surface.

5.7 The Contractor shall ensure that items which requires batteries have been provided with new alkaline batteries, and that they are working properly.

5.8 If recreational equipment is provided in this procurement, the Contractor shall install the recreational equipment. In addition, the Contractor shall be responsible for providing equipment, material, and expertise needed to place assemble, and level pool tables, soccer tables, table tennis, and dart boards as identified in the contract.

5.9 If electric appliances are provided in this procurement, the Contractor shall install the appliances. In addition, the Contractor shall be responsible for providing all equipment and material to install the ice machines, refrigerators, electric ranges, microwaves, clothes washers, and electric dryers as identified in the contract. The contractor shall provide power cords for all electrical items, which are appropriate for the item and the building’s electrical service, as well as hoses, vent kits, and/or other accessories required to have a fully functioning unit. Vendor is not responsible for connecting gas appliances to the gas supply.

5.10 If artwork is provided in this procurement, the Contractor shall install the artwork. In addition, the Contractor shall be responsible for providing equipment and material needed to install artwork in TV rooms, dayrooms, game rooms, etc., of each building as identified in the contract. The TR will provide locations for placement of artwork. Mount artwork at standing eye-level height of 5’-6” on center above finished floor, or at seated eye-level height of 4’-4” on center above finished floor, per direction from TR.

5.11 If floor cleaning equipment is provided in this procurement, the Contractor shall uncrate, assemble, and provide all materials and equipment necessary to ensure the buffer, shampooers, and vacuum cleaners are in operational condition, and locate equipment within the building per direction from the TR.

5.12 The Contractor shall be responsible for installing other items that have been shipped to and/or stored at the installation as noted in Table 1. If no items are identified in these blocks, then there are no other items that must be installed under this contract.

5.13 Mattresses and box springs (if applicable) shall be installed whether provided by the Contractor or by the Government, even if not noted in Table 1. If mattresses are provided by the Government, the Contractor shall pick up these items from the location specified by the TR and install in accordance with this Statement of Work.

6. ASSEMBLY

6.1 The Contractor shall uncrate all items received and perform all required assembly in accordance with the manufacturers' instructions.

6.2 All furniture, equipment and accessories shall be level, plumb, square, and in proper alignment with adjoining furniture. Furnishings shall be securely attached to the building where applicable.

6.3 The Contractor shall inspect to ensure that the furniture is free of surface dirt and defects, and that the installation is complete, and the furniture is ready to use.

6.4 If required, the Contractor shall reverse doors and handles on the refrigerators in sleeping rooms.

7. PROTECTION OF PROPERTY

7.1 The Contractor shall perform an inspection of the buildings and grounds with the TR prior to starting work. The Contractor shall protect all items from damage during both removal and installation. The Contractor shall take precaution against damage to the building, grounds, and other furnishings. The Contractor shall perform a final inspection of the buildings and grounds after completing work. A corrective action plan shall be provided by the Contractor that details type, source, and schedule of repairs.

7.2 The Contractor shall repair or replace any items, building components, or grounds damaged due to negligence and/or direct action by the Contractor using materials of the same quality, size, texture, and color to match adjacent existing work. All repairs beyond simple surface cleaning require concurrence of the TR before the Contractor or anyone other than the facility construction contractor (or its subcontractors) may perform any significant repair work. Use of the facility construction contractor (or appropriate subcontractor) is required for all significant repairs so that the building warranty is maintained.

7.3 The Contractor shall be responsible for security of the area in which work is being performed and prior to completion and transfer to the Government. The Contractor shall maintain accountability and control of any keys provided and shall return them to the TR upon completion of work.

7.4 Material-handling equipment shall have rubber wheels.

8. PRODUCT DOCUMENTATION

8.1 The Contractor shall ensure that all owner’s manuals, warranty information, assembly instructions, maintenance and care instructions, operating instructions, and any other information is provided to the TR upon completion of the installation.

8.2 The Contractor shall collect special assembly tools, the security hardware wrench, and any spare parts provided with the furnishings and turn them over to the TR.

9. CLEANUP

9.1 The Contractor will be responsible for the removal and disposal of all trash connected with uncrating and assembling furniture and other items installed under this contract. Final acceptance of the furniture (Technical Representative signing acceptance on Delivery Order/contract), from the contractor will not occur until all trash connected with the furniture installation is removed from the site.

9.2 Recyclable cardboard products shall be disposed of in accordance with Table 1.

9.3 Packing materials will not be stored in the buildings for any period exceeding 24 hours.

9.4 Personal trash (food wrappers, drinks, etc.) shall be removed from the site on a daily basis by the contractor.

10. EXCESS ITEMS

10.1 Once equipment is installed as shown on the furniture layout, the Contractor shall coordinate with the TR as to where any excess items are to be stored. Contractor will be responsible for delivery of excess items to storage area designated by TR.

11. Safety

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.1 Safety Compliance Requirements. Contractor shall comply with FAR 52.236-13 Accident Prevention and execute all work in accordance with (IAW) the latest version of Safety Manual EM 385-1-1 per base contract.

11.2 Site Visit Accident Prevention Plan (SVAPP). A SVAPP is required if an APP with a site/survey activity hazard analysis (AHA) has not been provided and accepted by the furnishings program CEHNC KO in coordination with (ICW) CEHNC Safety and Occupational Health Office (SOHO). The SVAPP is intended and necessary for any site visit not covered by an APP and these site visits shall be for visual inspection/observation or office type work only. If work must be performed (i.e., metering, work on energized equipment), an Accident Prevention Plan (APP) must be submitted and accepted.

11.3 Accident Prevention Plan. The APP shall follow the minimum requirements of EM 385-1-1 Chapter 2-7 and this PWS. Follow the mandatory ENG Form 6293 (Accident Prevention Plan Worksheet). The APP must be submitted and accepted by the CEHNC KO ICW CEHNC SOHO prior to starting any work at the site. The contractor is responsible for preparing an APP per EM 385-1-1 for all work that goes beyond the scope of a site. The completed APP shall be submitted to the KO Furnishings Invoice box at least thirty (30) business days prior to field work performance. Field work shall not take place until the APP has been submitted, reviewed, and accepted by the CEHNC Safety Office.

11.4 Contractor shall verify with the controlling installation, the applicability, and requirements for emergency procedures, permit required work procedures, and hazardous environments and waste disposal. These findings shall be incorporated into the APP.

11.5 Activity Hazard Analysis (AHA). All AHAs shall be written in accordance with section 6 in each applicable chapter in EM 385-1-1. The identification and proof of qualification for competent/qualified persons (e.g., Confined Space, Electrician, Crane Operator, etc.) and proof of qualification shall be included IAW EM 385-1-1 Chapter 2-6. d(4)(g). Define the steps to be performed for the activity/task/DFOW and the work sequences (for example, site conditions, materials, personnel) needed. Job steps should be detailed so that the reader clearly understands how that job will be accomplished (for example, how the part will be installed or removed, anticipated voltages, quantities of chemicals utilized, equipment utilized to accomplish the task, heights being accessed).

11.6 Site-Specific Addendum (SSA). SSAs are required for each site if work will be conducted on two or more distinct sites. The SSAs shall be submitted to the KO Furnishings invoice box for review and acceptance by the CEHNC Safety Office prior to work starting. Each SSA shall contain detailed site-specific information only applicable to a specific location. It shall be attached to the APP as an appendix and be readily available on the jobsite.

11.7 Safety document resubmittal shall include the original local SOHO comments with detailed responses (Form 7 or 4025) and highlight all changes.

11.8 Any Proposals, Change Orders, and Contract Modifications shall be verified that they are covered under the current accepted APP. If the pending work effort is NOT covered under the initial task order APP, the contractor shall submit, for government review and acceptance, an addendum to the APP.

11.9 Notifications and Reports. All accidents and near misses will be reported in accordance with EM 385-1-1 Table 2-1. Most current version of the ENG Form 3394 Aug 2021 shall be used for all reporting measures. Failure to comply with these requirements will be reflected on CPARS (If applicable).

11.10 Monthly Exposure Hours Report. This report is a compilation of employee-hours worked each month for all site workers, both prime and subcontractors. Hours associated with administrative activities such as payroll, human resource, service order managers/technicians, etc., are not counted. Exposure hours shall be submitted to HNC Contracting Office (CT). The data must be posted/submitted not later than 10 calendar days after the end of each month. Exposure data consists of man-hours expended in direct performance of the work performed on the jobsite. The monthly submission shall be broken down by Contract and identify exposure hours for each Contract. If no hours are worked on the project/task, a report showing zero (0) is required. Contractors should report monthly exposure hours by using the Excel Exposure Hour Report via email to *either contract specialist or PgM.

11.11 Prime Contractor Corporate Safety Official / Corporate Official (CSO/CO). This contract requires a minimum of one Corporate Safety Official / Corporate Official to manage and oversee the implementation of the Prime Contractor’s Safety Program. The CSO or CO shall conduct roles and responsibilities listed in EM 385-1-1 (2024) Chapter 2-4. f.

11.12 Site Safety and Health Officer (SSHO). No work shall be conducted at the site of the work until an SSHO (L2 / L3) is present as described and EM 385-1-1 (2024) Chapter 2-8. b. L2s are required for this project that include work that includes LOTO (208V or above), Fall Protection, Confined Space, Use of LHE, Scaffolding, or any other higher hazard activity. L3 is acceptable for any phases of work outside of what is listed above to include office work, providing furniture/equipment support, the receiving and unloading of materials/furniture, or any other low hazard activities. L2/L3 are only permitted on projects with a residual risk of low or medium.

11.13 The SSHO on site must be employed by the prime contractor unless otherwise approved by the KO/COR ICW CEHNC SOHO. If a subcontractor employee is allowed, SSHOs must work under direction of the prime contractors CSO or CO equivalent (CSO or CO does not need to be onsite) from the Prime Contractor. The APP shall include discussion as to how the CSO or CO will ensure the L2 and/or L3 is/are implementing the requirements of the prime contractor’s safety program, EM 385-1-1, OSHA, consensus standards, any additional local laws and regulations, and all accepted safety plans. This shall include but is not limited to the review of site documentation, site audits, training, meetings, and accident reports.

11.14 After Hours Work/Multiple Shifts. Planned after hours work or multiple shifts like dual shifts or scheduled work designed to not impact the customer is considered normal shift operations and shall still ensure that an SSHO, as required by scope of work, is on-site while work is being performed.

11.15 Multiple sites / Locations outside of 45 minutes: shall still ensure that an L2 is on the main site while work is being performed but would additionally need an L3 or L2 (depending on scope of work) for each location, however processes and procedures must be identified in the APP how communication and reporting will be established between the L3 and L2 for these evolutions.

12. AT-OPSEC

12.1 General security requirements and guidance: The security requirements described below apply to all contract personnel (including employees of the prime Contractor (“Contractor”) and all subcontractor employees) supporting the performance requirements of this contract. The Contractor is responsible for compliance with these security requirements. Questions regarding security matters shall be addressed to the designated Government representative (e.g., Contracting Officer Representative (COR), Requiring Activity (RA) representative, or Contracting Officer (if a COR or other RA representative is not appointed)). Contract personnel are critical to the overall security and safety of US Army Corps of Engineers (USACE) installations, facilities and activities, and security awareness training contributes to those efforts. The Department of Defense (DoD) and Army security training requirements specified below, if applicable, are performance requirements; all applicable contract personnel shall complete initial training within 30 days of contract award or the date new contract personnel begin performance on the contract. Within five business days from the completion of training, the Contractor shall provide written documentation (e.g., email or memorandum) to the Government representative. The documentation shall include the names of contract personnel trained and which training they completed; the Contractor shall maintain training records as part of their contract files and be prepared to provide copies of training certificates to the Government representative. Contractor personnel and vehicles are subject to search when entering federal installations. Additionally, all contract personnel shall comply with Force Protection Condition (FPCON) measures, Random Antiterrorism Measures (commonly referred to as “RAMs”), and Health Protection Condition (HPCON) measures. The Contractor is responsible for meeting performance requirements during elevated FPCON and/or HPCON levels in accordance with applicable RA plans and procedures --this includes identifying mission essential and non-mission essential personnel. In addition to the changes otherwise authorized by the changes clause of this contract, should the FPCON or HPCON levels at any individual facility or installation change, the Government may implement security changes that affect contract personnel. The Contractor shall ensure all contract personnel are aware of their security responsibilities, including any site-specific requirements identified in local policies or procedures.

12.2 Suspicious Activity Reporting training (e.g., iWATCH, CorpsWatch, or See Something, Say Something): All contract personnel shall receive initial and annual refresher training from the RA representative on the local suspicious activity reporting program. This locally developed training provides contract personnel with general information on suspicious behavior, and guidance on reporting suspicious activity to the project manager, security representative or law enforcement entity.

12.3 Escorting in classified and/or sensitive areas: In accordance with applicable regulations, all contract personnel who do not possess the appropriate security clearance or access privileges will be escorted in areas where they may be exposed to classified information or operations, sensitive information or activities, or restricted areas.

12.4 Pre-screen candidates using E-Verify Program: Contractors shall comply with the requirements set forth in FAR clause 52.222-54 Employment Eligibility Verification and FAR Subpart 22.18 in using the E-Verify Program at (https://www.e-verify.gov/) (website subject to change) to meet the contract employment eligibility requirements. The Vendor must ensure that the Candidate has two (2) valid forms of Government issued identification prior to enrollment to ensure the correct information is entered into the E-Verify system. Contractors are encouraged to cooperate with Federal and State agencies responsible for enforcing labor requirements to include eligibility for employment under United States immigration laws in accordance with FAR 22.102-1(i). An initial list of verified/eligible candidates shall be provided to the COR no later than three business days after the initial contract award. When contracts are with individuals, the individuals will be required to complete a Form I-9, Employment Eligibility Verification, and submit it to the Contracting Officer to become part of the official contract file.

12.5 All contractor and all associated sub-contractors’ employees shall comply with applicable installation or facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks or background investigation and to meet installation and MEDOCM access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DoD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition at any installation or facility change, the Government may require changes in contractor security matters or processes.

TABLE 1. Project specific information.

Dahlgren Technical Representative:

Jeffrey Stankovich

Tech. Rep. Phone:

540-653-2308

Tech. Rep. Email:

jeffrey.l.stankovich2.naf@us.navy.mil

Will the Building be Occupied During Install

Yes

Delivery Type

Staged (Room by Room)

If this is a staged delivery, how many rooms will be accessible per day?

10-12

Acceptable Hours of Delivery:

0700-1530

Number of floors:

Elevator Available for Use During Install

Elevator Dimensions

DRMO: It is the responsibility of the TR to coordinate with DRMO to ensure they are aware of the project

DRMO Location:

Point of Contact Name:

Charlene Johnson

Phone/Email:

540-653-2307 charlene.e.johnson6 .naf@navy.mil

Address:

Building Number

17455 Potomac Inn Rd Bldg 959

Dahlgren Virgina 22448

Street Address

City, State, Zip Code

Business Hours:

0700-1530

Do they accept mattresses?:

No

DRMO Special Requirements (Pallets, Shrink Wrap):

All recyclable cardboard products to be delivered to:

Address:

Building Number

Not Applicable.

Street Address

City, State, Zip Code

Phone:

Access & Delivery Information:

Security Requirements:

You will all have to be vetted, before entry into the Base.

(2) forms od ID and you might have to use DBIDS.

Gate (B) is the entyr gate for the furnishings trucks.

Shipping Label for Furniture:

Physical Address:

Building Number Street Address City, State, Zip Code

Potomac Inn - Building 959 17455 Potomac Inn Rd Dahlgren, VA 22448

Shipping Label for Soft Goods (If different from furniture)

17455 Potomac Inn Rd , Bldg 959

Warehouse information:

Address:

Building Number

Street Address

17455 Potomac Inn Rd , Bldg 959

City, State, Zip Code

Items stored at warehouse location noted above, to be installed under this contract: example: if you have mattresses in your warehouse and the vendor needs to pick them up and install with the new furnishings. Provide list of items and how many there are.

Not applicable

Building Specific Information:

Other Information such as truck parking, how close the truck can get to the building, can a vendor provided forklift be used on location, are the rooms accessible from the outside via a catwalk or the inside.

Parking is in front of the building.

Rooms are not accessible from outside and there is no catwalk.

The fields required if furnishings/window treatments/hardware are being removed as part of this contract.

Old furnishing to be delivered to: If DRMO/DLA is being used, state that in this box. If the vendor needs to dispose of, please say so here.

Vendor is responsible for the removal and disposal of all old furnishings and ancillary items

List ALL furnishings to be removed: Be specific and list the item and how many there are. If Captains beds are being removed, list the size and number of drawers: If drop lid desk or Armoires are being removed, list dimensions.

124 microwaves

Guam, Corral Ridge

Technical Representative:

Ms. Carla Rios

Tech. Rep. Phone:

671-339-6133

Tech. Rep. Email:

carla.rios.civ@us.navy.mil

Will the Building be Occupied During Install

Yes

Delivery Type

Staged (Room by Room)

If this is a staged delivery, how many rooms will be accessible per day?

Acceptable Hours of Delivery:

0800-1600

Number of floors:

Elevator Available for Use During Install

Elevator Dimensions

DRMO: It is the responsibility of the TR to coordinate with DRMO to ensure they are aware of the project

DRMO Location:

Point of Contact Name:

Rodney Retuyan

Phone/Email:

671-339-4056 rodney.m.retuyan@dla.mil

Address:

Building Number

BLDG 631

BLDG 631 Connellee Lane US Naval Base

Santa Rita Guam 96915

Street Address

City, State, Zip Code

Business Hours:

0800-1500

Do they accept mattresses?:

No

DRMO Special Requirements (Pallets, Shrink Wrap):

DRMO does not take mattresses.

Vendor/Contractor is responsible for all associated costs for the removal and the disposal from the base of all mattresses to be replaced in accordance with proper mattress disposal procedures. The Vendor/Contractor is prohibited from donating, selling or reusing any of the mattresses.

All recyclable cardboard products to be delivered to:

Address:

Building Number

Vendor/Contractor is responsible for the removal and the disposal of all packaging material and trash from Government property.

Street Address

City, State, Zip Code

Phone:

Access & Delivery Information:

Security Requirements:

Access to the base is through the front gate entrance. To obtain access, prior approval must be arranged with the Visitor's Control Center located in B1657A on the right side of the road before front gate entrance. POC for security is Elizabeth Balajadia. Email:

elizabeth.balajadia@fe.navy.mil or phone#:

671‐339‐6217.

Shipping Label for Furniture:

Physical Address:

Building Number

City, State, Zip Code Blldg 72 Warehouse US Naval Base Santa Rita, Guam 96915

Shipping Label for Soft Goods (If different from furniture)

NA

Warehouse information:

Address:

Building Number

NA

Street Address

City, State, Zip Code

Items stored at warehouse location noted above, to be installed under this contract: example: if you have mattresses in your warehouse and the vendor needs to pick them up and install with the new furnishings. Provide list of items and how many there are.

NA

Building Specific Information:

Other Information such as truck parking, how close the truck can get to the building, can a vendor provided forklift be used on location, are the rooms accessible from the outside via a catwalk or the inside.

NAVHOSP Corral Ridge UH is a Housing Area converted UH. This project is made up of 22-, 3- and 4-bedroom houses. Parking available on the street directly in from of each unit.

The fields required if furnishings/window treatments/hardware are being removed as part of this contract.

Old furnishing to be delivered to: If DRMO/DLA is being used, state that in this box. If the vendor needs to dispose of, please say so here.

Old Furniture to be delivered to DRMO/DLA for disposal

List ALL furnishings to be removed: Be specific and list the item and how many there are. If Captains beds are being removed, list the size and number of drawers: If drop lid desk or Armoires are being removed, list dimensions.

44 Microwaves

Great Lakes 6301

Technical Representative:

Michael Landry

Tech. Rep. Phone:

847-708-7542

Tech. Rep. Email:

michael.j.landry4.civ@us.navy.mil

Will the Building be Occupied During Install

No

Delivery Type

Not Staged

If this is a staged delivery, how many rooms will be accessible per day?

All Rooms

Acceptable Hours of Delivery:

0700-1500

Number of floors:

Elevator Available for Use During Install

Yes

Elevator Dimensions

Standard Passenger Elevator

DRMO: It is the responsibility of the TR to coordinate with DRMO to ensure they are aware of the project

DRMO Location:

Point of Contact Name:

NA

Phone/Email:

NA NA

Address:

Building Number

NA

NA

Street Address

City, State, Zip Code

Business Hours:

NA

Do they accept mattresses?:

NA

DRMO Special Requirements (Pallets, Shrink Wrap):

NA

All recyclable cardboard products to be delivered to:

Address:

Building Number

The contractor is responsible for the removal of all trash and recyclable (s) including cardboard associated with the removal and install of FF&E.

Street Address

City, State, Zip Code

Phone:

Access & Delivery Information:

Security Requirements:

DBIDS Required. Contractors, Vendors and Delivery Vehicle Operators/Drivers requesting access to the Naval Installation in order to provide a service, complete a procurement action, or a delivery must undergo a Background Investigation that will take a minimum of 15 business days to process. In accordance with Secretary of the Navy Instruction SECNAVINST 5512, all Contractors, Vendors and Delivery Vehicle Operators/Drivers will complete and submit the SECNAV_5512_1_11787 APPROVED AC PASS ID FORM 05282014. To initiate the process, the Contractors, Vendors and Delivery Vehicle Operators/Drivers must complete and submit the aforementioned form to the UH Trusted Agent via the company they are working for. Once this form is completed, signed and dated it must either be faxed or electronically sent back to the Unaccompanied Housing Trusted Agent for final submittal. Important information that must be included and written legibly on the form includes: full social security number, birth date, driver’s license number, full name, city, state and country of birth. In addition to being vetted and approved for access, the truck drivers delivering materials and supplies must proceed to Pass and ID (Visitors Center) prior to gaining access to the Installation to pick up a Day Pass where they will be required to produce the following documents: a valid driver’s license, current insurance, current registration, bill of lading with the destination address, and if the vehicle is not registered to the driver, a notarized letter stating the driver has permission to operate the vehicle. When these requirements are produced a Day Pass will be issued. Deliveries to buildings will enter base via Gate 1 unless directed to Gate 5. **Visitors Center Hours are: Monday ‐ Friday: 0600 ‐ 1600.

Shipping Label for Furniture:

Physical Address:

Building Number

City, State, Zip Code 330 Nimiz Ave. Great Lakes Il. 60088

Shipping Label for Soft Goods (If different from furniture)

NA

Warehouse information:

Address:

Building Number

Street Address

NA

City, State, Zip Code

Items stored at warehouse location noted above, to be installed under this contract: example: if you have mattresses in your warehouse and the vendor needs to pick them up and install with the new furnishings. Provide list of items and how many there are.

NA

Building Specific Information:

Other Information such as truck parking, how close the truck can get to the building, can a vendor provided forklift be used on location, are the rooms accessible from the outside via a catwalk or the inside.

Within 50 feet from Street to building

The fields required if furnishings/window treatments/hardware are being removed as part of this contract.

Old furnishing to be delivered to: If DRMO/DLA is being used, state that in this box. If the vendor needs to dispose of, please say so here.

Vendor is responsible for the removal and disposal of all old furnishings and ancillary items

List ALL furnishings to be removed: Be specific and list the item and how many there are. If Captains beds are being removed, list the size and number of drawers: If drop lid desk or Armoires are being removed, list dimensions.

166 microwaves

Old window treatments and hardware to be delivered to: If vendor needs to dispose of, please say so here.

NA

Pensacola 4146

Technical Representative:

Tara Barber

Tech. Rep. Phone:

850-452-8514

Tech. Rep. Email:

tara.l.barber5.naf@us.navy.mil

Will the Building be Occupied During Install

Yes

Delivery Type

Not Staged

If this is a staged delivery, how many rooms will be accessible per day?

NA

Acceptable Hours of Delivery:

0700-1530

Number of floors:

Elevator Available for Use During Install

No

Elevator Dimensions

NA

DRMO: It is the responsibility of the TR to coordinate with DRMO to ensure they are aware of the project

DRMO Location:

Point of Contact Name:

NA

Phone/Email:

NA

Address:

Building Number

NA

Street Address

City, State, Zip Code

Business Hours:

NA

Do they accept mattresses?:

No

DRMO Special Requirements (Pallets, Shrink Wrap):

NA

All recyclable cardboard products to be delivered to:

Address:

Building Number

Street Address

City, State, Zip Code

Phone:

Access & Delivery Information:

Security Requirements:

Requires DBIDs to enter.

Shipping Label for Furniture:

Physical Address:

Building Number

City, State, Zip Code 905 East Avenue NAS Pensacola Building 3901 Pensacola, FL 32508

Shipping Label for Soft Goods (If different from furniture)

NA

Warehouse information:

Address:

Building Number

Street Address

City, State, Zip Code

Items stored at warehouse location noted above, to be installed under this contract: example: if you have mattresses in your warehouse and the vendor needs to pick them up and install with the new furnishings. Provide list of items and how many there are.

NA

Building Specific Information:

Other Information such as truck parking, how close the truck can get to the building, can a vendor provided forklift be used on location, are the rooms accessible from the outside via a catwalk or the inside.

Building is three stories. Interior stairwells only.

The fields required if furnishings/window treatments/hardware are being removed as part of this contract.

Old furnishing to be delivered to: If DRMO/DLA is being used, state that in this box. If the vendor needs to dispose of, please say so here.

Vendor is responsible for the removal and disposal of old microwaves

List ALL furnishings to be removed: Be specific and list the item and how many there are. If Captains beds are being removed, list the size and number of drawers: If drop lid desk or Armoires are being removed, list dimensions.

210 Microwaves

Old window treatments and hardware to be delivered to: If vendor needs to dispose of, please say so here.

N/A

List ALL window treatment and hardware to be removed: List how many draperies or blinds. List type of blinds being removed.

Norfolk Bldg. 1585

Technical Representative:

Lucia Vallejo

Tech. Rep. Phone:

757-396-3883

Tech. Rep. Email:

lucia.vallejo.mil@us.navy.mil

Will the Building be Occupied During Install

No

Delivery Type

Not Staged

If this is a staged delivery, how many rooms will be accessible per day?

18 (one wing at a time)

Acceptable Hours of Delivery:

0800-1600

Number of floors:

Elevator Available for Use During Install

Yes

Elevator Dimensions

Outside 42W X 76L Ins 86L X 76D X 42 W

DRMO: It is the responsibility of the TR to coordinate with DRMO to ensure they are aware of the project

DRMO Location:

NA

Point of Contact Name:

Phone/Email:

Address:

Building Number

NA

Street Address

City, State, Zip Code

Business Hours:

Do they accept mattresses?:

NA

DRMO Special Requirements (Pallets, Shrink Wrap):

NA

All recyclable cardboard products to be delivered to:

Address:

Building Number

Vendor is responsible for removal and disposal of all packing material and trash

Street Address

City, State, Zip Code

Phone:

Access & Delivery Information:

Security Requirements:

To access the base, you will need the following: Birth Certificate, Driver’s License, Passport, Social Security Card or the Real ID (Two forms of ID is a must) (I would have them bring it all so that there are no issues).

Ensure all of the following are copied on delivery bill of laden:

TR: CS1 Lucia Vallejo at 757-438-3233

Chief Kyle Chock at 757-438-3233

Mathew Calhoun at 757-402-0090

Shipping Label for Furniture:

Physical Address:

Building Number

City, State, Zip Code 1585 Cole Street, Portsmouth, VA 23709 (Dale Towers West)

Shipping Label for Soft Goods (If different from furniture)

NA

Warehouse information:

Address:

Building Number

Street Address

NA

City, State, Zip Code

Items stored at warehouse location noted above, to be installed under this contract: example: if you have mattresses in your warehouse and the vendor needs to pick them up and install with the new furnishings. Provide list of items and how many there are.

NA

Building Specific Information:

Other Information such as truck parking, how close the truck can get to the building, can a vendor provided forklift be used on location, are the rooms accessible from the outside via a catwalk or the inside.

Parking lot in front of the building. 25 feet from parking to door. Forklift can fit up to the front doors. Doors are sliding doors (motion detected). We do not have a forklift and one cannot fit in the building.

The fields required if furnishings/window treatments/hardware are being removed as part of this contract.

Old furnishing to be delivered to: If DRMO/DLA is being used, state that in this box. If the vendor needs to dispose of, please say so here.

Vendor is responsible for the removal and disposal of all old Microwaves

List ALL furnishings to be removed: Be specific and list the item and how many there are. If Captains beds are being removed, list the size and number of drawers: If drop lid desk or Armoires are being removed, list dimensions.

208 Microwaves

NBVC 21-25, 214, 241, 251-261

Technical Representative:

SABRINA CONTRERAS

Tech. Rep. Phone:

805-607-8632

Tech. Rep. Email:

sabrina.l.contreras.civ@us.navy.mil

Will the Building be Occupied During Install

No

Delivery Type

Not Staged

If this is a staged delivery, how many rooms will be accessible per day?

All Rooms

Acceptable Hours of Delivery:

0730-1630

Number of floors:

Elevator Available for Use During Install

No

Elevator Dimensions

NA

DRMO: It is the responsibility of the TR to coordinate with DRMO to ensure they are aware of the project

DRMO Location:

Point of Contact Name:

NA

Phone/Email:

NA

Address:

Building Number

NA

Street Address

City, State, Zip Code

Business Hours:

Do they accept mattresses?:

NA

DRMO Special Requirements (Pallets, Shrink Wrap):

NA

All recyclable cardboard products to be delivered to:

Address:

Building Number

Street Address

City, State, Zip Code

Phone:

Access & Delivery Information:

Security Requirements:

MUST SUBMIT ACCESS PASS FROM PASS AND ID OFFICE LOCATED IN FRONT OF BASE. WILL NEED TO SUBMIT FORM 5512 TO SUCH OFFICE.

WILL NEED SPONSOR AND OR SEND FORMS TO BASE THROUGH BASE SPONSOR. MUST CONTACT PAZ OLVERA-HAMPSTEN FOR BASE ACCESS REQUESTS. paz.b.olvera-hampsten.civ@us.navy.mil

Shipping Label for Furniture:

Physical Address:

Building Number

City, State, Zip Code 311 Main Rd Point Mugu, CA 93042

Shipping Label for Soft Goods (If different from furniture)

NA

Warehouse information:

Address:

Building Number

Street Address

NA

City, State, Zip Code

Items stored at warehouse location noted above, to be installed under this contract: example: if you have mattresses in your warehouse and the vendor needs to pick them up and install with the new furnishings. Provide list of items and how many there are.

NA

Building Specific Information:

Other Information such as truck parking, how close the truck can get to the building, can a vendor provided forklift be used on location, are the rooms accessible from the outside via a catwalk or the inside.

Vendor provided forklift is authorized as long as contractor is responsible for getting access for them.

TRUCK CAN BE PARKED IN THE BACK OF THE BUILDING WHERE THERE IS ACCESS TO STAIRS FOR BOTH FLOORS. NO ELEVATOR IN BUILDING.

The fields required if furnishings/window treatments/hardware are being removed as part of this contract.

Old furnishing to be delivered to: If DRMO/DLA is being used, state that in this box. If the vendor needs to dispose of, please say so here.

Vendor is responsible for the removal and disposal of all old microwaves

List ALL furnishings to be removed: Be specific and list the item and how many there are. If Captains beds are being removed, list the size and number of drawers: If drop lid desk or Armoires are being removed, list dimensions.

229 Microwaves

Gulfport 306

Technical Representative:

Michelle Andersen

Tech. Rep. Phone:

228-871-3852

Tech. Rep. Email:

michelle.k.andersen.naf@us.navy.mil

Will the Building be Occupied During Install

No

Delivery Type

Not Staged

If this is a staged delivery, how many rooms will be accessible per day?

All

Acceptable Hours of Delivery:

0700-1500

Number of floors:

Elevator Available for Use During Install

Yes

Elevator Dimensions

DOOR- L-84 IN BY W-42IN

DRMO: It is the responsibility of the TR to coordinate with DRMO to ensure they are aware of the project

DRMO Location:

Point of Contact Name:

NA

Phone/Email:

NA

Address:

Building Number

NA

Street Address

City, State, Zip Code

Business Hours:

Do they accept mattresses?:

NA

DRMO Special Requirements (Pallets, Shrink Wrap):

NA

All recyclable cardboard products to be delivered to:

Address:

Building Number

Vendor to be responsible for disposal of all cardboard and other trappings (i.e. shrink wrap- bindings-trash etc..).

Street Address

City, State, Zip Code

Phone:

Access & Delivery Information:

Security Requirements:

Delivery date and time must be confirmed with the Tech Rep or Alternate before delivery can be accepted. Trucks must access the 28th street gate (this is the commercial gate). Rapid Gate IS NO LONGER ACCEPTED they will need to fill out the background check form (which takes 72 hrs.

to come back).Or otherwise be escorted onto the base.

Contact the Rep. for base entry. Valid ID is required, as well as valid Auto Insurance.

Shipping Label for Furniture:

Physical Address:

Building Number

City, State, Zip Code NCBC Gulfport MS Bldg 306 300 Fifth St.

Gulfport, Ms. 39501

Shipping Label for Soft Goods (If different from furniture)

NCBC Gulfport Bldg 306 300 Fifth St.

Gulfport, Ms. 39501

Warehouse information:

Address:

Building Number

Street Address

NCBC Gulfport

WAREHOUSE 19

LOWER NIXON AVE

Gulfport, MS 39501

City, State, Zip Code

Items stored at warehouse location noted above, to be installed under this contract: example: if you have mattresses in your warehouse and the vendor needs to pick them up and install with the new furnishings. Provide list of items and how many there are.

Building Specific Information:

Other Information such as truck parking, how close the truck can get to the building, can a vendor provided forklift be used on location, are the rooms accessible from the outside via a catwalk or the inside.

The truck can get up to 20 to 25 feet away from the building. The vendor must provide own forklift. There is a catwalk if perferred to use forklift.

The fields required if furnishings/window treatments/hardware are being removed as part of this contract.

Old furnishing to be delivered to: If DRMO/DLA is being used, state that in this box. If the vendor needs to dispose of, please say so here.

Vendor is responsible for the removal and disposal of all old furnishings and ancillary items

List ALL furnishings to be removed: Be specific and list the item and how many there are. If Captains beds are being removed, list the size and number of drawers: If drop lid desk or Armoires are being removed, list dimensions.

93 MICROWAVES

Lakeside A & B

Technical Representative:

Jacqueline Pinero

Tech. Rep. Phone:

(228) 938-6864

Tech. Rep. Email:

jacqueline.pinero2.naf@us.navy.mil

Will the Building be Occupied During Install

No

Delivery Type

Not Staged

If this is a staged delivery, how many rooms will be accessible per day?

All

Acceptable Hours of Delivery:

0700-1500

Number of floors:

Elevator Available for Use During Install

No

Elevator Dimensions

NA

DRMO: It is the responsibility of the TR to coordinate with DRMO to ensure they are aware of the project

DRMO Location:

NA

Point of Contact Name:

Phone/Email:

Address:

Building Number

Street Address

City, State, Zip Code

Business Hours:

Do they accept mattresses?:

NA

DRMO Special Requirements (Pallets, Shrink Wrap):

NA

All recyclable cardboard products to be delivered to:

Address:

Building Number

Vendor to be responsible for disposal of all cardboard and other wrappings (i.e. shrink wrap- bindings-trash etc..).

Street Address

City, State, Zip Code

Phone:

Access & Delivery Information:

Security Requirements:

Delivery date and time must be confirmed with the Tech Rep or Alternate before delivery can be accepted. Trucks must access the front gate - contractors must be escorted onto the base.

Contact the Rep. for base entry. Valid ID is required, as well as valid Auto Insurance.

Shipping Label for Furniture:

Physical Address:

Building Number

City, State, Zip Code NSF Pascagoula, Lakeside 3500 Chicot St.

Building A & B Pascagoula, MS 39581

Shipping Label for Soft Goods (If different from furniture)

NA

Warehouse information:

Address:

Building Number

Street Address

NA

City, State, Zip Code

Items stored at warehouse location noted above, to be installed under this contract: example: if you have mattresses in your warehouse and the vendor needs to pick them up and install with the new furnishings. Provide list of items and how many there are.