R0003.pdf

W68MD952881561

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

W912DW-16-R-0001 FY15 NICoE Satellite Site at JBLM, WA

(See continuation page)

1. CONTRACT ID CODE PAGE OF PAGES

J 1 2

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 16-Nov-2015

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912DW-16-R-0001

X 9B. DATED (SEE ITEM 11)

30-Oct-2015

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

16-Nov-2015

CODE

USA ENGINEER DISTRICT, SEATTLE

ATTN: CECT-NWS

4735 EAST MARGINAL WAY SOUTH, BLDG. 1202

SEATTLE WA 98134-2388

W912DW 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912DW-16-R-0001

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

1. This amendment three (0003) provides for the following

a. Revisions to Section 00 21 00, Instructions, Conditions and Notices to Offeror.

b. The site visit slides and attendance sheet are provided for informational purposes only.

c. Wage decisions WA150097 with 6 modifications dated 9/4/2015 are hereby incorporated into and made a part of the solicitation specifications.

2. The proposal submittal time and date of December 1, 2015 at 1:00:00 p.m. LOCAL TIME remains the same.

3. NOTICE TO OFFERORS: Offerors must acknowledge receipt of this amendment by number and date on offer.

Encl:

00 21 00 (revised) Site Visit slides and Attendance sheet (New) WA150097 (new)

(End of Summary of Changes)

W912DW-16-R-0001 00 21 00 - 1 R0003

SECTION 00 21 00

INSTRUCTIONS, CONDITIONS AND NOTICES TO OFFERORS

1.0 GENERAL INFORMATION

1.1 GENERAL DESCRIPTION OF WORK

1.2 CONTRACT COST CEILING LIMITATION FOR DESIGN AND CONSTRUCTION

COSTS

1.3 SUBJECT TO AVAILABILITY OF FUNDS

1.4 GOVERNMENT SECURITY REQUIREMENTS

1.5 COPIES OF SOLICITATION DOCUMENTS AND AMENDMENTS

1.6 OFFEROR'S QUESTIONS AND COMMENTS

1.7 SMALL BUSINESS SIZE STANDARD/NAICS CODE

1.8 PROPOSAL EXPENSES AND PRE-CONTRACT COSTS

1.9 PRE-PROPOSAL CONFERENCE / SITE VISIT

1.10 ACCURACY IN PROPOSALS

1.11 PROPOSAL SUBMITTALS

1.12 PROPOSAL FORMAT

1.13 JOINT VENTURE PROPOSAL REQUIREMENTS

1.14 SOLICITATION PROVISIONS

W912DW-16-R-0001 00 21 00 - 2 R0003

1.0 GENERAL INFORMATION

1.1 GENERAL DESCRIPTION OF WORK:

The scope of project includes all work required for the construction of FY15 NICoE SATELLITE SITE at JBLM, WA.

The work shall be in accordance with Request for Proposal documents.

General description of work:

The USACE Seattle District has a requirement for the construction of infrastructure improvements and service connections in support of the National Intrepid Center of Excellence (NICoE) Satellite Facility. Supporting facilities include site development, utilities and connections, lighting, sidewalks, curbs and gutters, storm management, information systems, paving, parking, landscaping and signage.

1.2 CONTRACT COST CEILING LIMITATION FOR DESIGN AND

CONSTRUCTION COSTS:

The design and construction costs will be subject to the funds available for this project. The total contract award should not exceed $2,095,900.00 for this contract. Offerors are notified that they are under no obligation to approach this ceiling. However the Government may not be able make an award, if the dollar amount set for this project is exceeded.

1.3 SUBJECT TO AVAILABILITY OF FUNDS:

FAR Clause 52.232-18 “Availability of Funds,” (APR 1984) Funds are not presently available for this contract. The Government’s obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer.

1.4 GOVERNMENT SECURITY REQUIREMENTS:

The Offeror(s) must ensure that ALL mail sent to the Seattle District, U.S. Army Corps of Engineers, either pre-contract or post-contract award, has a return mailing address on the outside of the envelope, package, box, etc. ANY MAIL addressed to the U.S. Army Corps of Engineers, including but not limited to; bids, modifications to bids, proposals, revised proposals, bonds, correspondence, etc., will be REJECTED by the US Army Corps of Engineers mail room facility located in Building 1202, at 4735 East Marginal Way South, Seattle, WA 98134 if it does not contain a return mailing address. THERE WILL BE NO EXCEPTIONS.

W912DW-16-R-0001 00 21 00 - 3 R0003

1.5 COPIES OF SOLICITATION DOCUMENTS AND AMENDMENTS:

Copies of the solicitation and amendments are available by INTERNET ACCESS ONLY. All solicitation documents will be posted to the Federal Business Opportunities website at http://www.fbo.gov under solicitation number W912DW-16-R-0001.

It shall be the contractor’s responsibility to check the websites for any amendments. The Offeror shall submit in the proposal all requested information specified in this solicitation. There will be no public opening of the proposals received as a result of this solicitation.

A list of interested vendors (potential Offerors and subcontractors) is available on the federal business opportunities web site (registration required) is available at: http://www.fbo.gov via Quick Search (Solicitation No. W912DW-16-R-0001).

Additional information regarding this solicitation and potential Offerors and/or subcontractors is available at http://www.nws.usace.army.mil/BusinessWithUs/Contracting.aspx.

1.6 OFFEROR'S QUESTIONS AND COMMENTS:

Questions and/or comments relative to these documents should be submitted via e-mail or mailed to:

Contract Specialist:

U.S. Army Corps of Engineers, Seattle District ATTN: John Scola Mailing Address:

P.O. Box 3755 Seattle, WA 98124-3755 Fax: 206-764-6817 Email: John.P.Scola@usace.army.mil

[ATTENTION: I prefer to be contacted by email because I’m hearing impaired] http://www.fbo.gov/ http://www.nws.usace.army.mil/BusinessWithUs/Contracting.aspx mailto:John.P.Scola@usace.army.mil

W912DW-16-R-0001 00 21 00 - 4 R0003

Contracting Officer:

U.S. Army Corps of Engineers, Seattle District ATTN: Susan Newby Phone: 206-764-6754 Fax: 206-764-6817 Email: Susan.F.Newby@usace.army.mil

Note: All questions and/or comments should reach the above referenced Contracting Office no later than three (3) calendar days after the pre-proposal conference, in order that they may be given consideration or actions taken prior to receipt of offers.

1.6.1. Bidder Inquiry:

1.6.1.1. Technical inquiries and questions relating to proposal procedures or bonds are to be submitted via Bidder Inquiry in ProjNet at http://www.projnet.org/projnet.

1.6.1.1.1. To submit and review bid inquiry items, bidders will need to be a current registered user or self-register into system. To self-register go to web page, click BID tab select Bidder Inquiry, select agency USACE, enter Key for this solicitation listed below, and your e-mail address, click login. Fill in all required information and click create user. Verify that information on next screen is correct and then click continue.

1.6.1.1.2. From this page you may view all bidder inquiries or add inquiry.

1.6.1.1.3. Bidders will receive an acknowledgement of their question via email, followed by an answer to their question after it has been processed by our technical team.

1.6.1.1.4. The Solicitation Number is: W912DW-16-R-0001

1.6.1.1.5. The Bidder Inquiry Key is: IQHQK4-EF295W.

1.6.1.2. The Bidder Inquiry System will be unavailable for new inquires 5 days prior to proposal submission in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary.

1.6.1.3. Offerors are requested to review the specification in its entirety, review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry.

1.6.1.4. The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800-428-HELP.

1.6.1.5. Offers will NOT be publicly opened. Information concerning the status of the evaluation and/or award will NOT be available after receipt of proposals.

mailto:Susan.F.Newby@usace.army.mil http://www.projnet.org/projnet

W912DW-16-R-0001 00 21 00 - 5 R0003

1.7. SMALL BUSINESS SIZE STANDARD/NAICS CODE:

See Section 00 45 00, FAR 52.219-1 for the small business size standard/NAICS Code.

1.8. PROPOSAL EXPENSES AND PRE-CONTRACT COSTS:

This Request for Proposal (RFP) does not commit the Government to pay, as a direct charge, any costs incurred in the preparation and submission of a proposal.

1.9 PRE-PROPOSAL CONFERENCE:

• Site visit meeting will be held at 10:30 AM (PDST) on Tuesday, 9 November, 2015 at Joint

Base Lewis-McChord (JBLM), in the Madigan Army Medical Center, BLDG 9040, Basement Conference Room G-23-21. The physical address is: 9040 Jackson Ave., Tacoma, WA 98431. Madigan Army Medical Center is located between Jackson Avenue on the north and Gardner Loop on the south on JBLM Lewis Main. Access to Madigan can be from either road. NICOE Project Site is located approximately 2 blocks from Conference Room location.

Medical Center parking lot is very congested. Suggested parking at the Project Site and walk to Conference Room Please view attached PDF of “Madigan Army Medical Center and directions indicating route from the Main Gate or Madigan Gate to parking your vehicle and walking to the Conference Room which will require no building badge.

• Please allow yourself enough time to find parking and get to basement Conference Room G- 23-21. After the meeting at the Madigan Center Conference Room, the participants will proceed to the NICOE site as indicated on the attached map/directions found in back of Section 00 21 00 and as directed by COE personnel at conference room on the day of site visit as indicated above.

• Participants must provide their own transportation. COE point of contact is Joanne Few McWilson, work number: 206-764-3664 or cell number: 206-484-4575. Email is joanne.f.mcwilson@usace.army.mil.

• Please email JBLMBaseAccess@usace.army.mil if you have questions regarding access to the base.

• A temporary 1-day vehicle pass is required to drive on Fort Lewis and may be obtained from the Visitor’s Center at the Fort Lewis Main Gate. Due to heightened security, the following procedures will describe how to gain access to the site visit for yourself and any subcontractors attending (if they or you do not have current access to the military installation). Contractors that have privately owned vehicles must have proof of vehicle insurance and vehicle registration; in the case of a rental vehicle, contractors must have a rental agreement.

• Attendees are required to have picture identification (valid ID).

mailto:joanne.f.mcwilson@usace.army.mil mailto:JBLMBaseAccess@usace.army.mil

W912DW-16-R-0001 00 21 00 - 6 R0003

• BIDDERS ARE URGED and expected to inspect the site where construction is to be performed and to satisfy themselves as to all general and local conditions which may affect the cost of performance of the contract, to the extent, such information is reasonably obtainable. In no event, will a failure to inspect the site constitute grounds for withdrawal of a bid after opening or for a claim after award of the contract.

1.10 ACCURACY IN PROPOSALS:

Proposals must set forth full, accurate, and complete information as required by this RFP, (including attachments). The penalty for making false statements is prescribed in 18 U.S.C.

1001.

1.11 PROPOSAL SUBMITTALS:

Due to heightened security at Government installations, those Offerors who have their proposals hand-delivered shall contact Procurement Technician, Bobbie Weitzel at 206-764-6692 or Sonia Frees at 206-764-3516 prior to delivering to the address shown below. At the time specified on the SF1442, it will be announced that receipt of proposals is closed.

Note that the official receipt of a bid shall be in accordance with FAR 52.214-7. Recent terrorist threats have resulted in more time-consuming sign-in and escort procedures and may impact the timely delivery of offers. See FAR 52.215-1 for rules concerning late proposals.

See Box 13 of the Standard Form 1442 for the time and date your proposal is due.

EMAIL: Emailed Proposal will NOT be accepted.

FAX: Faxed Proposal will NOT be accepted.

FED-EX/UPS: John Scola, Contract Specialist, Building 1202 U.S. Army Corps of Engineers, Seattle District

CECT-NWS

4735 East Marginal Way S., Bldg. #1202 Seattle, WA 98134-2385 Note: Commercial Carriers will not deliver to PO Boxes

MAIL: John Scola, Contract Specialist, Building 1202 U.S. Army Corps of Engineers, Seattle District

CECT-NWS

PO Box 3755 Seattle, WA 98124-3755

W912DW-16-R-0001 00 21 00 - 7 R0003

HAND

DELIVERY: John Scola, Contract Specialist, Building 1202 U.S. Army Corps of Engineers, Seattle District

CECT-NWS

4735 East Marginal Way S., Bldg. #1202 Seattle, WA 98134-2385

The method of Hand Delivery has changed and takes longer than the previous method of arriving at the Federal Center South building (#1201) lobby to deliver your Offer, Bid or Proposal. Please allow sufficient time to allow for heightened security at Government installations and to get to our new location in Oxbow Building #1202. Allow time to park, pass through a metal detector, sign in, and receive a building pass at the Federal Center South Building (#1201). From there, you will be directed to the new USACE Oxbow Building (#1202) which sits behind the Federal Center South Building (#1201). Allow additional time.

Report to the Security Desk in the lobby of the USACE Oxbow Building and call Bobbie Weitzel, Procurement Technician, at 206-764-6692, or Sonia Frees, Procurement Technician, at 206-674-3516. A Contracting representative will come down and accept your Offer, Bid or Proposal.

Note: If delivery is by any means other than Hand Delivery, please check prior to the due date and time to ensure that your Offer, Bid, or Proposal has arrived on time.

The Packaging that contains the Proposals shall be marked:

“Proposal for Solicitation Number: W912DW-16-R-0001, DO NOT OPEN”

1.12 PROPOSAL FORMAT:

(a) Please refer to Section 00 24 00 for Submission Format requirements.

(b) Technical Proposal: Submit one (1) Original printed volume and one (1) Electronic Copy in PDF on a CD. Both must be identical.

(c) Price proposal and Pro Forma information: Submit one (1) Original printed volume and one (1) Electronic Copy in PDF on a CD. Both must be identical, except for the bid schedule as noted below.

• Note: the Bid Schedule can be handwritten and “excluded” from the Price Proposal

CD, but all other required items in your proposal shall be included in the CDs.

(a) Please refer to Section 00 24 00 for Submission Format requirements.

(b) Number of design technical copies: Submit one original and four (4) copies of drawings and printed matter (Bound Volumes), as well as two (2) CDs.

W912DW-16-R-0001 00 21 00 - 8 R0003

(c) For the required Price proposal and Pro Forma information: submit the original and one copy, and one separate CD.

• Note: the Bid Schedule can be handwritten and “excluded” from the CDs, but all other required items in your proposal shall be included in the CDs.

1.13 JOINT VENTURE PROPOSAL REQUIREMENTS:

When proposing as a joint venture, all members of the joint venture shall sign the SF 1442 and the bid bond unless a written agreement by the joint venture is furnished with the proposal designating one firm with the authority to bind the other member(s) of the joint venture. In addition, a copy of the joint venture agreement shall be submitted with the proposal. Failure to comply with the foregoing requirements may eliminate the proposal from further consideration. If this is an 8(a), SDVOSB or HubZone joint venture, the Offeror shall ensure that it complies with the applicable requirements of 13 CFR Part 124, 13 CFR Part 125 and 13 CFR Part 126, respectively.

Any of the Joint Venture partners identified in the JV agreement can submit project(s) to meet the requirement in Section 00 24 00 for evaluation.

1.14 SOLICITATION PROVISIONS:

Please see Section 00 21 00 “Additional Clauses.”

END OF SECTION 00 21 00

This page intentionally blank

US Army Corps of Engineers

BUILDING STRONG®

Pre-Proposal Conference & Site Visit

John Scola

Contract Specialist

Seattle District

9 November 2015

Request for Proposal (RFP)

W912DW-16-R-0001

FY15 NICoE SATELLITE SITE at JBLM, WA

Introduction

The slides from this conference will be posted to the Solicitation by Amendment on the FedBizOpps website at www.FBO.gov.

This conference is for informational purposes only.

Comments/clarifications made today WILL NOT change the Solicitation in any way.

Changes to the Solicitation shall ONLY be made by written Amendments.

Questions Any and all questions from this Pre-Proposal Conference and Site Visit should be submitted to www.ProjNet.org using the Bidder Inquiry Key and instructions provided in the solicitation.

No technical-specific questions will be answered today.

Instead, all questions should be asked on www.ProjNet.org.

The cutoff for submitting questions in www.ProjNet.org is three (3) business days prior to the proposal due date, currently at 1 December 2015 at 1:00:00 PM (Seattle time).

http://www.projnet.org/ http://www.projnet.org/ http://www.projnet.org/

Questions During Proposal Stage

Contracting Web Address for Solicitation Documents:

www.FBO.gov link for solicitation number:

► W912DW-16-R-0001

Technical Questions: www.ProjNet.org For Any Other Administrative Questions, please contact

John Scola at:

► Email: John.P.Scola@usace.army.mil

Federal Acquisition Regulation: http://farsite.hill.af.mil http://www.fbo.gov/ http://www.projnet.org/ mailto:John.P.Scola@usace.army.mil http://farsite.hill.af.mil/

SMALL BUSINESS

This RFP will be SDVOSB Set-Aside Opportunity only.

NAICS Code: 238910.

Small Business Size Standard is $15M.

For specific small business related questions, please contact the Deputy for Small Business Programs at:

► Phone: 206-764-6662

► Email: Jason.G.Herrera@usace.army.mil mailto:Jason.G.Herrera@usace.army.mil

Solicitation General Information

RFP Number: W912DW-16-R-0001 Amendments will be issued when changes to Solicitation are necessary.

The Contract Cost Limitation is $2,095,900.

Bid Guarantee: A Bid Guarantee is required in the amount of 20 percent (20%) of the proposal price or $3 Million, whichever is less.

► Please see FAR 52.228-1 for more details.

Solicitation General Information

Please read Section 00 21 00 and Section 00 24 00 for required documents for submittal with your Proposal.

The Proposals are required to be submitted to the U.S.

Army Corps of Engineers, Seattle District Office, no later than 1:00:00 PM Seattle Time, on 1 December 2015.

► Please refer to Block 13 on SF1442.

NO offers will be accepted after the noted time and date.

PLEASE DON’T BE LATE.

Selection Procedures and Basis of Award

The anticipated award of this solicitation will be based on the Lowest Priced Technically Acceptable (LPTA) proposal.

A Firm-Fixed Price contract will be awarded to the technically acceptable, responsive and responsible Offeror submitting the lowest priced offer with the total of all line items.

Evaluation Factors

Please read Sections 00 21 00 and Section 00 24 00 thoroughly.

See Section 00 24 00, Paragraph 7.0 how the Government will evaluate Past Performance.

Ensure your proposal is complete and reflects all elements required by the RFP.

Proposals must be submitted in Two (2) Volumes – Price and Technical.

Price Evaluation

Price proposals will be evaluated for fairness and reasonableness through the use of price analysis. Price will also be checked for unbalancing of line items.

Bid Bonds will be checked for legal sufficiency.

It is the intent of the Government to make award based upon initial offers, without further discussions or additional information.

Wage Determinations Davis-Bacon wage rates shall be used on this contract.

The Department of Labor (DoL) establishes minimum monetary wages/fringe benefits to be paid in performance of this contract.

Wage Determinations (WD) incorporated into this RFP may be updated/modified during the solicitation period.

The most current version of the WD will be incorporated into the Contract at time of award.

Your price proposal, and if necessary, revised price proposal, must always reflect the latest update to the

WD.

Conclusion

Continue to check your emails or FBO.gov website for new amendments to the RFP. Check regularly up until the due date and time for receipt of proposals.

Ensure you have completed ALL information required by the RFP and submit those items with your proposal.

Ensure compliance with the solicitation requirements.

This solicitation shall ONLY be changed by written Amendment.

Directions to Site Visit

POC: USACE Project Manager – Joanne McWilson

W912DW-16-R-0001 WA150097 – 6 R0003

General Decision Number: WA150097 09/04/2015 WA97

Superseded General Decision Number: WA20140097

State: Washington

Construction Type: Heavy including water and sewer line construction

County: Pierce County in Washington.

HEAVY CONSTRUCTION PROJECTS (including sewer/water construction).

Note: Executive Order (EO) 13658 establishes an hourly minimum wage of $10.10 for 2015 that applies to all contracts subject to the Davis-Bacon Act for which the solicitation is issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.10 (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/02/2015 1 02/06/2015 2 06/12/2015 3 06/26/2015 4 07/03/2015 5 07/24/2015 6 09/04/2015

ASBE0007-001 06/01/2015

Rates Fringes

ASBESTOS WORKER/HEAT & FROST

INSULATOR (Pipe and Duct Insulation)......................$ 46.21 16.97

CARP0770-030 06/01/2015

Rates Fringes

CARPENTER (Including Formwork)...$ 40.36 13.66

MILLWRIGHT.......................$ 41.86 13.66

PILEDRIVERMAN....................$ 40.61 13.66

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON - ALL

CLASSIFICATIONS EXCEPT MILLWRIGHTS AND PILEDRIVERS

Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the following listed cities:

Seattle Olympia Bellingham Auburn Bremerton Anacortes Renton Shelton Yakima Aberdeen-Hoquiam Tacoma Wenatchee

Ellensburg Everett Port Angeles Centralia Mount Vernon Sunnyside Chelan Pt. Townsend

Zone Pay:

0 -25 radius miles Free 26-35 radius miles $1.00/hour 36-45 radius miles $1.15/hour 46-55 radius miles $1.35/hour Over 55 radius miles $1.55/hour

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON - MILLWRIGHT

AND PILEDRIVER ONLY)

Hourly Zone Pay shall be computed from Seattle Union Hall, Tacoma City center, and Everett City center

Zone Pay:

0 -25 radius miles Free 26-45 radius miles $ .70/hour Over 45 radius miles $1.50/hour

ELEC0076-005 09/01/2014

Rates Fringes

ELECTRICIAN......................$ 34.49 23.36

ELEC0077-001 02/01/2013

Rates Fringes

Line Construction:

LINEMEN.....................$ 45.62 4%+12.90

ENGI0612-020 07/01/2014

Rates Fringes

POWER EQUIPMENT OPERATOR

GROUP 1A...................$ 38.39 17.40

GROUP 1AA..................$ 38.96 17.40

GROUP 1AAA.................$ 39.52 17.40

GROUP 1.....................$ 37.84 17.40

GROUP 2.....................$ 37.35 17.40

GROUP 3.....................$ 36.93 17.40

GROUP 4.....................$ 32.72 17.40

Zone Differential (Add to Zone 1 rates):

Zone 2 (26-45 radius miles) = $1.00 Zone 3 (Over 45 radius miles) - $1.30

BASEPOINTS: CENTRALIA, OLYMPIA, TACOMA

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1AAA - Cranes-over 300 tons, or 300 ft of boom (including jib with attachments)

GROUP 1AA - Cranes 200 to 300 tons, or 250 ft of boom (including jib with attachments);Tower crane over 175 ft in height, base to boom; Excavator/Trackhoe: Over 90 metric tons

GROUP 1A - Cranes, 100 tons thru 199 tons, or 150 ft of boom (including jib with attachments);Crane-overhead, bridge type, 100 tons and over; Tower crane up to 175 ft in height base to boom; Loaders-overhead, 8 yards and over;

excavator/Trackhoe: over 50 metric tons to 90 metric tons;

Backhoe- 6 yards and over with attachments

GROUP 1 - Cranes 45 tons thru 99 tons, under 150 ft of boom (including jib with attachments);Crane-overhead, bridge type, 45 tons thru 99 tons; Derricks on building work;

Excavator/Trackhoe: over 30 metric tons to 50 metric tons;

Loader- overhead 6 yards to, but not including 8 yards;

Dozer D-10; Screedman; Scrapers: 45 yards and over;

Grader/Blade

GROUP 2 - Cranes, 20 tons thru 44 tons with attachments;Crane-overhead, bridge type-20 tons through 44 tons; Drilling machine; Excavator/Trackhoe: 15 to 30 metric tons; Horizontal/directional drill operator;

Loaders-overhead under 6 yards; Crane Oiler-100 Tons and Over; Scraper: under 45 tons; Backhoe- 3 yards and under;

Mechanic; Piledriver; Boring Machine

GROUP 3 - Cranes-thru 19 tons with attachments;A-frame crane over 10 tons; Dozers-D-9 and under; Motor patrol grader-nonfinishing; Roller-Plant Mix; Crane Oiler under 100 tons; Excavator/Trackhoe: under 15 metric tons; Service Oiler; Conveyors; Backhoe 75 hp and under; Forklift-3,000 lbs. and over with attachments; Boom Truck over 10 tons

GROUP 4 - Cranes-A frame-10 tons and under; Roller-other than plant mix; Rigger/Bellman; Grade Checker; Drill Assistant;

Forklift-under3,000 lbs. with attachments: Boom Truck 10 tons and under

IRON0086-010 07/01/2015

Rates Fringes

IRONWORKER (Reinforcing, Structural and Ornamental).......$ 40.04 23.19

LABO0001-025 06/01/2014

ZONE 1:

Rates Fringes

Laborers:

GROUP 2.....................$ 25.79 10.30

GROUP 3.....................$ 32.29 10.30

GROUP 4.....................$ 33.08 10.30

GROUP 5.....................$ 33.62 10.30

ZONE DIFFERENTIAL (ADD TO ZONE 1 RATES):

ZONE 2 - $1.00

ZONE 3 - $1.30

BASE POINTS: BELLINGHAM, MT. VERNON, EVERETT, SEATTLE, KENT,

TACOMA, OLYMPIA, CENTRALIA, ABERDEEN, SHELTON, PT.

TOWNSEND, PT. ANGELES, AND BREMERTON

ZONE 1 - Projects within 25 radius miles of the respective city hall ZONE 2 - More than 25 but less than 45 radius miles from the respective city hall ZONE 3 - More than 45 radius miles from the respective city hall

LABORERS CLASSIFICATIONS

GROUP 2: Flagman

GROUP 3: General Laborer; Mason Tender-Cement/Concrete; Form Stripping;Sign Erector/Installer

GROUP 4: Grade Checker; Pipe Layer; Handheld Drill; High Scaler; Jackhammer

GROUP 5: Mason Tender-Brick

PAIN0005-008 07/01/2015

Rates Fringes

PAINTER (Brush, Roller and Spray)...........................$ 23.05 10.85

PLAS0528-004 06/01/2015

Rates Fringes

CEMENT MASON/CONCRETE FINISHER...$ 38.52 15.43

PLUM0026-003 01/01/2015

Rates Fringes

Plumbers and Pipefitters.........$ 42.87 20.40

* TEAM0174-003 06/01/2015

Rates Fringes

Truck drivers:

ZONE A:

GROUP 1:...................$ 31.34 17.27

GROUP 2:...................$ 32.18 17.27

ZONE B (25-45 miles from center of listed cities*): Add $.70 per hour to Zone A rates.

ZONE C (over 45 miles from centr of listed cities*): Add $1.00 per hour to Zone A rates.

*Zone pay will be calculated from the city center of the following listed cities:

BELLINGHAM CENTRALIA RAYMOND OLYMPIA

EVERETT SHELTON ANACORTES BELLEVUE

SEATTLE PORT ANGELES MT. VERNON KENT

TACOMA PORT TOWNSEND ABERDEEN BREMERTON

TRUCK DRIVERS CLASSIFICATIONS

GROUP 1 - Dump Trucks, side, end and bottom dump, including semi-trucks and trains or combinations thereof with 16 yards to 30 yards capacity: Over 30 yards $.15 per hour additional for each 10 yard increment.; Water Truck-3,000 gallons and over; Semi-Trailer Truck

GROUP 2 - Dump trucks, side, end and bottom dump, including semi-trucks and trains or combinations thereof with less than 16 yards capacity; Water Truck- less than 3,000 gallons

HAZMAT PROJECTS

Anyone working on a HAZMAT job, where HAZMAT certification is required, shall be compensated as a premium, in addition to the classification working in as follows:

LEVEL C: +$.25 per hour - This level uses an air purifying respirator or additional protective clothing.

LEVEL B: +$.50 per hour - Uses same respirator protection as Level A. Supplied air line is provided in conjunction with a chemical "splash suit."

LEVEL A: +$.75 per hour - This level utilizes a fully-encapsulated suit with a self-contained breathing apparatus or a supplied air line.

SUWA2009-063 08/07/2009

Rates Fringes

LABORER: Landscape & Irrigation.......................$ 11.44 1.80

OPERATOR: Asphalt Plant.........$ 34.14 0.68

OPERATOR: Bobcat/Skid Steer/Skid Loader................$ 10.63 0.00

OPERATOR: Broom/Sweeper.........$ 30.39 3.77

OPERATOR: Power Shovel..........$ 25.12 7.83

TRUCK DRIVER: Flatbed Truck.....$ 22.74 6.29

TRUCK DRIVER: Lowboy Truck......$ 22.89 5.72

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than "SU" or "UAVG" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the "SU" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION