Amendment 0006.pdf

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of theoffer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER.

If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBE

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

J 1 3

0006 23 MAR 2026 101051

W912DS

W2SD ENDIST NEW YORK

KO CONTRACTING DIVISION, 26 FEDERAL PLAZA ROOM 16 300

NEW YORK, NY 10278-0004

UNITED STATES

ORLANDO NIEVES, EMAIL: ORLANDO.NIEVES@USACE.ARMY.MIL TELEPHONE:

(917) 790-8078

SCD: PAS:

W912DS26BA006

30 JAN 2026

SEE SECTION G - CONTRACT ADMINISTRATION DATA

The purpose of Amendment 0006:

1) Bid opening remains 31-March-2026 at 2:00 P.M. EST.

2) Respond to Bidder Request for information. For information Only.

3) Drawing Addendum 1, have been added. See Attached.

4) Drawings ED-102, ED103, E-202, E-203, E-303, have been revised and Reissued. See Attached.

5) Update Wage Rates. See Attached, MATTHEW LUBIAK

23 MAR 2026

Fort Drum, NY Gas Alley Access Control Point ACP

W912DS26BA006

Amendment 0006

AMENDMENT 0006 to DRAWINGS and SPECIFICATIONS for Gas Alley Access Control Point, Fort Drum NY.

TO OFFERORS

The following changes shall be made to the drawings and specifications.

DRAWINGS

1. The following DRAWINGS have been REVISED but NOT REISSUED:

- None

2. The following DRAWINGS have been REVISED and REISSUED:

- ED-102

- ED-103

- E-202

- E-203

- E-303

3. The following DRAWINGS have been ADDED:

- Drawing Addendum 1

- PFAS Addendum

4. The following DRAWINGS have been DELETED:

- None

SPECIFICATIONS

1. The following SPECIFICATION SECTIONS have been ADDED and are provided in their entirety herein:

- None

2. The following SPECIFICATIONS SECTIONS have been DELETED in their entirety:

- None

3. The following SPECIFICATIONS SECTIONS have been REVISED and REISSUED:

4. None The following SPECIFICATIONS have been REVISED but NOT REISSUED:

PROPOSER’S QUESTIONS AND GOVERNMENT REPLY

Questions that may be of general interest to all Offerors and/or the Government and that are not readily answered by the proceeding changes will appear below. These questions may have been paraphrased or altered to represent several questions regarding the same subject and/or simply revised to clarify and simplify the question(s). Questions and answers are issued to the Offerors “for information only” and do not revise the solicitation, plans or specifications.

Question 1 The passive cable barrier is specified as “configuration identical to the as-tested”. There are several corners on the cable barrier system that are less than 40’. The shortest m50 p1 cable barrier on the DOD list is 40’. Is it acceptable for a company make site specific modifications for corners?

Answer 1 If a contractor modifies a preapproved barrier length, that barrier is no longer preapproved. Any barriers that are not preapproved will need to undergo testing to prove that it meets the required crash ratings. Acceptance of test results can only be approved by the USACE Protective Design Center. The passive barrier linework on the plans is theoretical and the final layout can (and is expected to be) modified. The contractor must submit the final layout shop drawings for approval. Overlaps of barriers is acceptable. Gaps in the barrier can be no more than 4’ to achieve compliance.

Question 2 Reference Drawings C-102 and C-106, the new sanitary force main relocation (FM1) is notated to be 4” HDPE with 4” fittings and the profile of FM-1 on C-106 notates tie-ins to ‘existing 4” HDPE Sanitary Force Main’ at the ends. Further past the tie-in locations on the C- 102 plan, the existing sanitary force main is labeled as 6” HDPE. Please confirm for bidding purposes that 4” HDPE is the correct sizing for FM1?

Answer 2 FM-1 should be revised to 6” HDPE and 6” fittings.

--END--

NOTE: Bidders must acknowledge receipt of this amendment by date specified in the bid (or as amended) by one of the following methods: In the space provided on the SF 1442, by separate letter, or by signing block 15 below. FAILURE TO ACKNOWLEDGE AMENDMENT

BY DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR BID IN ACCORDANCE

WITH THE LATE BID, LATE MODIFICATION OF BID, OR LATE WITHDRAWAL OF BID

(FAR 14.304)