40 95 00 Appendix - AM0004.pdf
PDF 2 MB Posted
- Solicitation number
- W912DS21R0002
About this file
This solicitation seeks proposals for the Chrome Plating Facility Repair Project located in Watervliet, New York. The scope of work includes in-kind repair and replacement of major components for the large caliber chrome plating area, specifically tanks, electropolish tanks, caustic clean and strip tanks, rectifiers, and cold water rinse tanks for two plating lines. Additional work involves replacing corroded piping systems, pumps beyond useful life, and nonfunctional control elements. The air scrubber common to both lines will also be replaced. The period of performance is 720 calendar days from notice to proceed. The estimated cost range is $10-25 million. The NAICS code is 236210. Proposals are due in accordance with the solicitation published on SAM.gov. The contracting agency is the Department of the Army Corps of Engineers New York District.
View the file
Other files
Show all 22
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1 Instrument Tag:
2 Service:
3 Equipment Number:
4 Line Number:
5 P&ID Number:
6 Area Classification: N/A
10 Nozzle Projection:
11 Top of Nozzle to Weld Seam:
12 Alarm Level:
17 Units Max.
18 Pressure PSIG 1.0
19 Temperature °F 78.0
20 Density lb/ft3 68.57
21 Viscosity cP 1.15
22 Flow GPM 330.0
24 Tag Number: LSHH-212
25 Manufacturer: Model Number:
26 Element Type: Orientation:
27 Process Connection: Material:
28 Probe Length: Probe Finish:
29 Switching Time: Accuracy:
30 Max. Rated Temperature: Max. Rated Pressure:
33 Housing Material: Mounting:
34 Output Signal: Power Supply:
35 Electrical Connection: Enclosure Class:
36 Display: N/A
1. Level Switch to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Vega.
5. Probe length to be confirmed at time of proposal.
Client: USACE NY District
Project No: 119201
Requisition No: SWT-101
Specification: SP-LSHH-212
Sheet 1 of 1
Revision: 0
Notes
INSTRUMENT SPECIFICATION
Level Switches
3/4" - NPT N/A
Misc
Misc:
Housing
PVC Integral
DPDT 24-VDC
Sensor
Note 4 TBD
Vibrating Fork Vertical
3" - 150# RF PFA Coated 316SST
9.5" (Note 5) N/A
0.5 seconds +/- 0.04 inches
302F 100 bar
56.10 62.34
0.94 1.04
270.0 300.0
52.0 65.0
Design Pressure (psig): Design Temp (°F): 50 180
Operating Conditions Min. Normal
0.0 0.0Process
Conditions
Process Fluid: Phase: Emergency Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7
Equipment
Equipment
Nozzle Size, Rating, and Mat'l: 2", 150#, Kynar Lined CS
2.75"
0"
High-High Level
General
LSHH-212
Emergency Tank
T-212
N/A
M-0712
Note Used
AMENDMENT 0003
PVDF
AMENDMENT 0004
3 Equipment Number:
4 Line Number:
5 P&ID Number:
6 Area Classification: N/A
10 Pipe Material & Schedule
11 Pipe Insulation
17 Units Max.
18 Pressure PSIG 1.0
19 Temperature °F 156.0
20 Density lb/ft3 85.76
21 Viscosity cP 0.81
22 Flow GPM 15.0
24 Tag Number: FS-210
25 Manufacturer: Model Number:
26 Element Type: Orientation:
27 Process Connection: Material:
28 Probe Length: Probe Finish:
29 Switching Time: Accuracy:
30 Max. Rated Temperature: Max. Rated Pressure:
33 Housing Material: Mounting:
34 Output Signal: Power Supply:
35 Electrical Connection: Enclosure Class:
36 Display: N/A
1. Level Switch to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Vega.
Client: USACE NY District
Project No: 119201
Requisition No: SWT-103
Specification: SP-FS-210
Sheet 1 of 1
Revision: 0
Notes
INSTRUMENT SPECIFICATION
Flow Switches
3/4" - NPT N/A
Misc
Misc:
Housing
PVC Integral
DPDT 24-VDC
Sensor
Note 4 TBD
Vibrating Fork Vertical
1 1/2" - 150# RF PVC Coated 316SS
7" N/A
0.5 seconds +/- 0.04 inches
302F 100 bar
70.16 77.96
0.67 0.74
0.0 0.0
104.0 130.0
Design Pressure (psig): Design Temp (°F): 50 180
Operating Conditions Min. Normal
0.0 0.0Process
Conditions
Process Fluid: Phase: Chromic Acid Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7
Piping
Piping
Line Size
General
FS-210
Chromic Acid Surge Tank
T-210
2"-CR-PVDF-0328
M-0702
Sch. 80
N/A
PVDF
2"
Note Used
AMENDMENT 0003AMENDMENT 0004
3 Equipment Number:
4 Line Number:
5 P&ID Number:
6 Area Classification: N/A
10 Pipe Material & Schedule
11 Pipe Insulation
17 Units Max.
18 Pressure PSIG 1.0
19 Temperature °F 156.0
20 Density lb/ft3 85.76
21 Viscosity cP 0.81
22 Flow GPM 15.0
24 Tag Number: FS-310
25 Manufacturer: Model Number:
26 Element Type: Orientation:
27 Process Connection: Material:
28 Probe Length: Probe Finish:
29 Switching Time: Accuracy:
30 Max. Rated Temperature: Max. Rated Pressure:
33 Housing Material: Mounting:
34 Output Signal: Power Supply:
35 Electrical Connection: Enclosure Class:
36 Display: N/A
1. Level Switch to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Vega.
Client: USACE NY District
Project No: 119201
Requisition No: SWT-103
Specification: SP-FS-310
Sheet 1 of 1
Revision: 0
Notes
INSTRUMENT SPECIFICATION
Flow Switches
3/4" - NPT N/A
Misc
Misc:
Housing
PVC Integral
DPDT 24-VDC
Sensor
Note 4 TBD
Vibrating Fork Vertical
1 1/2" - 150# RF PVC Coated 316SS
7" N/A
0.5 seconds +/- 0.04 inches
302F 100 bar
70.16 77.96
0.67 0.74
0.0 0.0
104.0 130.0
Design Pressure (psig): Design Temp (°F): 50 180
Operating Conditions Min. Normal
0.0 0.0Process
Conditions
Process Fluid: Phase: Chromic Acid Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7
Piping
Piping
Line Size 2"
PVDF Sch. 80
N/A
General
FS-310
Chromic Acid Surge Tank
T-310
2"-CR-PVDF-0359
M-0703
3 Equipment Number:
4 Line Number:
5 P&ID Number:
6 Area Classification: N/A
10 Pipe Material & Schedule
11 Pipe Insulation
17 Units Max.
18 Pressure PSIG 1.0
19 Temperature °F 156.0
20 Density lb/ft3 114.58
21 Viscosity cP 0.56
22 Flow GPM 15.0
24 Tag Number: FS-211
25 Manufacturer: Model Number:
26 Element Type: Orientation:
27 Process Connection: Material:
28 Probe Length: Probe Finish:
29 Switching Time: Accuracy:
30 Max. Rated Temperature: Max. Rated Pressure:
33 Housing Material: Mounting:
34 Output Signal: Power Supply:
35 Electrical Connection: Enclosure Class:
36 Display: N/A
1. Level Switch to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Vega.
Client: USACE NY District
Project No: 119201
Requisition No: SWT-103
Specification: SP-FS-211
Sheet 1 of 1
Revision: 0
Notes
INSTRUMENT SPECIFICATION
Flow Switches
3/4" - NPT N/A
Misc
Misc:
Housing
PVC Integral
DPDT 24-VDC
Sensor
Note 4 TBD
Vibrating Fork Vertical
1 1/2" - 150# RF PVC Coated 316SS
7" N/A
0.5 seconds +/- 0.04 inches
302F 100 bar
93.74 104.16
0.46 0.51
0.0 0.0
104.0 130.0
Design Pressure (psig): Design Temp (°F): 50 180
Operating Conditions Min. Normal
0.0 0.0Process
Conditions
Process Fluid: Phase: Electropolish Solution Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7
Piping
Piping
Line Size 2"
PVDF Sch. 80
N/A
General
FS-211
Electropolish 200 Line
T-211
2"-EP-PVDF-0215
M-0704
3 Equipment Number:
4 Line Number:
5 P&ID Number:
6 Area Classification: N/A
10 Pipe Material & Schedule
11 Pipe Insulation
17 Units Max.
18 Pressure PSIG 1.0
19 Temperature °F 156.0
20 Density lb/ft3 114.58
21 Viscosity cP 0.56
22 Flow GPM 15.0
24 Tag Number: FS-311
25 Manufacturer: Model Number:
26 Element Type: Orientation:
27 Process Connection: Material:
28 Probe Length: Probe Finish:
29 Switching Time: Accuracy:
30 Max. Rated Temperature: Max. Rated Pressure:
33 Housing Material: Mounting:
34 Output Signal: Power Supply:
35 Electrical Connection: Enclosure Class:
36 Display: N/A
1. Level Switch to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Vega.
Client: USACE NY District
Project No: 119201
Requisition No: SWT-103
Specification: SP-FS-311
Sheet 1 of 1
Revision: 0
Notes
INSTRUMENT SPECIFICATION
Flow Switches
3/4" - NPT N/A
Misc
Misc:
Housing
PVC Integral
DPDT 24-VDC
Sensor
Note 4 TBD
Vibrating Fork Vertical
1 1/2" - 150# RF PVC Coated 316SS
7" N/A
0.5 seconds +/- 0.04 inches
302F 100 bar
93.74 104.16
0.46 0.51
0.0 0.0
104.0 130.0
Design Pressure (psig): Design Temp (°F): 50 180
Operating Conditions Min. Normal
0.0 0.0Process
Conditions
Process Fluid: Phase: Electropolish Solution Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7
Piping
Piping
Line Size 2"
PVDF Sch. 80
N/A
General
FS-311
Electropolish 300 Line
T-311
2"-EP-PVDF-0228
M-0706
3 Equipment Number:
4 Line Number:
5 P&ID Number:
6 Area Classification: N/A
10 Pipe Material & Schedule
11 Pipe Insulation
17 Units Max.
18 Pressure PSIG 1.0
19 Temperature °F 264.0
20 Density lb/ft3 65.78
21 Viscosity cP 1.16
22 Flow GPM 165.00
24 Tag Number: FS-111
25 Manufacturer: Model Number:
26 Element Type: Orientation:
27 Process Connection: Material:
28 Probe Length: Probe Finish:
29 Switching Time: Accuracy:
30 Max. Rated Temperature: Max. Rated Pressure:
33 Housing Material: Mounting:
34 Output Signal: Power Supply:
35 Electrical Connection: Enclosure Class:
36 Display: N/A
1. Level Switch to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Vega.
Client: USACE NY District
Project No: 119201
Requisition No: SWT-103
Specification: SP-FS-111
Sheet 1 of 1
Revision: 0
Notes
INSTRUMENT SPECIFICATION
Flow Switches
3/4" - NPT N/A
Misc
Misc:
Housing
PVC Integral
DPDT 24-VDC
Sensor
Note 4 TBD
Vibrating Fork Vertical
1 1/2" - 150# RF Wetted 316SS
8" N/A
0.5 seconds +/- 0.04 inches
302F 100 bar
53.82 59.80
0.95 1.05
135.0 150.0
176.0 220.0
Design Pressure (psig): Design Temp (°F): 50 250
Operating Conditions Min. Normal
28.0 35.0Process
Conditions
Process Fluid: Phase: Hot Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7
Piping
Piping
Line Size 4"
SS304 Sch. 40
N/A
General
FS-111
Hot Process Water Line 400
E-401
4"-HWS220-SS304-1314
M-0709
3 Equipment Number:
4 Line Number:
5 P&ID Number:
6 Area Classification: N/A
10 Pipe Material & Schedule
11 Pipe Insulation
17 Units Max.
18 Pressure PSIG 1.0
19 Temperature °F 264.0
20 Density lb/ft3 65.78
21 Viscosity cP 1.16
22 Flow GPM 165.00
24 Tag Number: FS-112
25 Manufacturer: Model Number:
26 Element Type: Orientation:
27 Process Connection: Material:
28 Probe Length: Probe Finish:
29 Switching Time: Accuracy:
30 Max. Rated Temperature: Max. Rated Pressure:
33 Housing Material: Mounting:
34 Output Signal: Power Supply:
35 Electrical Connection: Enclosure Class:
36 Display: N/A
1. Level Switch to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Vega.
Client: USACE NY District
Project No: 119201
Requisition No: SWT-103
Specification: SP-FS-112
Sheet 1 of 1
Revision: 0
Notes
INSTRUMENT SPECIFICATION
Flow Switches
3/4" - NPT N/A
Misc
Misc:
Housing
PVC Integral
DPDT 24-VDC
Sensor
Note 4 TBD
Vibrating Fork Vertical
1 1/2" - 150# RF Wetted 316SS
8" N/A
0.5 seconds +/- 0.04 inches
302F 100 bar
53.82 59.80
0.95 1.05
135.0 150.0
176.0 220.0
Design Pressure (psig): Design Temp (°F): 50 250
Operating Conditions Min. Normal
28.0 35.0Process
Conditions
Process Fluid: Phase: Hot Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7
Piping
Piping
Line Size 4"
SS304 Sch. 40
N/A
General
FS-112
Hot Process Water Line 400
E-402
4"-HWS220-SS304-1308
M-0709
3 Equipment Number:
4 Line Number:
5 P&ID Number:
6 Area Classification: N/A
10 Pipe Material & Schedule
11 Pipe Insulation
17 Units Max.
18 Pressure PSIG 1.0
19 Temperature °F 264.0
20 Density lb/ft3 65.78
21 Viscosity cP 1.16
22 Flow GPM 165.00
24 Tag Number: FS-164
25 Manufacturer: Model Number:
26 Element Type: Orientation:
27 Process Connection: Material:
28 Probe Length: Probe Finish:
29 Switching Time: Accuracy:
30 Max. Rated Temperature: Max. Rated Pressure:
33 Housing Material: Mounting:
34 Output Signal: Power Supply:
35 Electrical Connection: Enclosure Class:
36 Display: N/A
1. Level Switch to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Vega.
Client: USACE NY District
Project No: 119201
Requisition No: SWT-103
Specification: SP-FS-164
General
FS-164
Hot Process Water Line 400
E-401/402
1"-HWR220-SS304
M-0709
SS304 Sch. 40
N/A
Process
Conditions
Process Fluid: Phase: Hot Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7
Piping
Piping
Line Size 1"
176.0 220.0
Design Pressure (psig): Design Temp (°F): 50 250
Operating Conditions Min. Normal
28.0 35.0
53.82 59.80
0.95 1.05
135.0 150.0
Sensor
Note 4 TBD
Vibrating Fork Vertical
3/4" - NPT Wetted 316SS
6.5" N/A
0.5 seconds +/- 0.04 inches
302F 100 bar
3/4" - NPT N/A
Misc
Misc:
Housing
PVC Integral
DPDT 24-VDC
Notes
INSTRUMENT SPECIFICATION
Flow Switches
Sheet 1 of 1
Revision: 0
3 Equipment Number:
4 Line Number:
5 P&ID Number:
6 Area Classification: N/A
10 Pipe Material & Schedule
11 Pipe Insulation
17 Units Max.
18 Pressure PSIG 1.0
19 Temperature °F 102.0
20 Density lb/ft3 68.39
21 Viscosity cP 0.95
22 Flow GPM 5.50
24 Tag Number: FS-213
25 Manufacturer: Model Number:
26 Element Type: Orientation:
27 Process Connection: Material:
28 Probe Length: Probe Finish:
29 Switching Time: Accuracy:
30 Max. Rated Temperature: Max. Rated Pressure:
33 Housing Material: Mounting:
34 Output Signal: Power Supply:
35 Electrical Connection: Enclosure Class:
36 Display: N/A
1. Level Switch to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Vega.
Client: USACE NY District
Project No: 119201
Requisition No: SWT-103
Specification: SP-FS-213
Sheet 1 of 1
Revision: 0
Notes
INSTRUMENT SPECIFICATION
Flow Switches
3/4" - NPT N/A
Misc
Misc:
Housing
PVC Integral
DPDT 24-VDC
Sensor
Note 4 TBD
Vibrating Fork Vertical
3/4" - NPT Wetted 316SS
6.5" N/A
0.5 seconds +/- 0.04 inches
302F 100 bar
55.95 62.17
0.77 0.86
0.0 5.0
68.0 85.0
Design Pressure (psig): Design Temp (°F): 150 180
Operating Conditions Min. Normal
52.0 65.0Process
Conditions
Process Fluid: Phase: Cold Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7
Piping
Piping
Line Size 1"
SS304 Sch. 40
N/A
General
FS-213
Cold Water Circulation Header Makeup
T-227
1"-CWS-SS304
M-0710
3 Equipment Number:
4 Line Number:
5 P&ID Number:
6 Area Classification: N/A
10 Pipe Material & Schedule
11 Pipe Insulation
17 Units Max.
18 Pressure PSIG 1.0
19 Temperature °F 228.0
20 Density lb/ft3 73.41
21 Viscosity cP 0.68
22 Flow GPM 5.50
24 Tag Number: FS-201
25 Manufacturer: Model Number:
26 Element Type: Orientation:
27 Process Connection: Material:
28 Probe Length: Probe Finish:
29 Switching Time: Accuracy:
30 Max. Rated Temperature: Max. Rated Pressure:
33 Housing Material: Mounting:
34 Output Signal: Power Supply:
35 Electrical Connection: Enclosure Class:
36 Display: N/A
1. Level Switch to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Vega.
Client: USACE NY District
Project No: 119201
Requisition No: SWT-103
Specification: SP-FS-201
Sheet 1 of 1
Revision: 0
Notes
INSTRUMENT SPECIFICATION
Flow Switches
3/4" - NPT N/A
Misc
Misc:
Housing
PVC Integral
DPDT 24-VDC
Sensor
Note 4 TBD
Vibrating Fork Vertical
1 1/2" - 150# RF Wetted 316SS
8" N/A
0.5 seconds +/- 0.04 inches
302F 100 bar
60.07 66.74
0.56 0.62
4.5 5.0
152.0 190.0
80 °F
Design Pressure (psig): Design Temp (°F): 50 250
Operating Conditions Min. Normal
15.2 19.0Process
Conditions
Process Fluid: Phase: 10% Caustic Solution Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7 psia
Piping
Piping
Line Size 2"
SS304 Sch. 40
N/A
General
FS-201
Electroclean Tank
T-201
2"-EC-SS304-0101
M-0707
3 Equipment Number:
4 Line Number:
5 P&ID Number:
6 Area Classification: N/A
10 Pipe Material & Schedule
11 Pipe Insulation
17 Units Max.
18 Pressure PSIG 1.0
19 Temperature °F 228.0
20 Density lb/ft3 73.41
21 Viscosity cP 0.68
22 Flow GPM 5.50
24 Tag Number: FS-301
25 Manufacturer: Model Number:
26 Element Type: Orientation:
27 Process Connection: Material:
28 Probe Length: Probe Finish:
29 Switching Time: Accuracy:
30 Max. Rated Temperature: Max. Rated Pressure:
33 Housing Material: Mounting:
34 Output Signal: Power Supply:
35 Electrical Connection: Enclosure Class:
36 Display: N/A
1. Level Switch to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Vega.
Client: USACE NY District
Project No: 119201
Requisition No: SWT-103
Specification: SP-FS-301
Sheet 1 of 1
Revision: 0
Notes
INSTRUMENT SPECIFICATION
Flow Switches
3/4" - NPT N/A
Misc
Misc:
Housing
PVC Integral
DPDT 24-VDC
Sensor
Note 4 TBD
Vibrating Fork Vertical
1 1/2" - 150# RF Wetted 316SS
8" N/A
0.5 seconds +/- 0.04 inches
302F 100 bar
60.07 66.74
0.56 0.62
4.5 5.0
152.0 190.0
80 °F
Design Pressure (psig): Design Temp (°F): 50 250
Operating Conditions Min. Normal
15.2 19.0Process
Conditions
Process Fluid: Phase: 10% Caustic Solution Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7 psia
Piping
Piping
Line Size 4"
SS304 Sch. 40
N/A
General
FS-301
Electroclean Tank
E-402
4"-HWS220-SS304-1308
M-0709
3 Equipment Number:
4 Line Number:
5 P&ID Number:
6 Area Classification: N/A
10 Nozzle Projection:
11 Top of Nozzle to Weld Seam:
12 Alarm Level:
17 Units Max.
18 Pressure PSIG 1.0
19 Temperature °F 78.0
20 Density lb/ft3 67.31
21 Viscosity cP 0.47
22 Flow GPM 66.0
24 Tag Number: LS-253
25 Manufacturer: Model Number:
26 Element Type: Orientation:
27 Stem Material: Float Material:
28 Stem Length: Float Count:
29 Switching Time: Accuracy:
30 Max. Rated Temperature: Max. Rated Pressure:
33 Housing Material: Mounting:
34 Output Signal: Power Supply:
35 Electrical Connection: Enclosure Class:
36 Display: N/A
1. Level Switch to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers include: Drexelbrook, Omega, and Madison.
Client: USACE NY District
Project No: 119201
Requisition No: SWT-104
Specification: SP-LS-253
Note 5
TBD
Low-Low, Low, High, High-High
General
LS-253
Chem Waste
P-223A/B
N/A
M-0713
Process
Conditions
Process Fluid: Phase: Waste Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7
Equipment
Equipment
Nozzle Size, Rating, and Mat'l: Note 5
52.0 65.0
Design Pressure (psig): Design Temp (°F): 150 150
Operating Conditions Min. Normal
0.0 0.0
55.07 61.19
0.39 0.43
54.0 60.0
Sensor
Note 4 TBD
Float Vertical
316SS Wetted 316SS
8'-0" 4
0.5 seconds +/- 0.04 inches
302F 100 bar
3/4" - NPT N/A
Misc
Misc:
Housing
PVC Integral
DPDT 24-VDC
Notes
INSTRUMENT SPECIFICATION
Level Switches
Sheet 1 of 2
Revision: 0
3 Equipment Number:
4 Line Number:
5 P&ID Number:
6 Area Classification: N/A
10 Nozzle Projection:
11 Top of Nozzle to Weld Seam:
12 Alarm Level:
17 Units Max.
18 Pressure PSIG 1.0
19 Temperature °F 78.0
20 Density lb/ft3 67.31
21 Viscosity cP 0.47
22 Flow GPM 82.5
24 Tag Number: LS-104
25 Manufacturer: Model Number:
26 Element Type: Orientation:
27 Stem Material: Float Material:
28 Stem Length: Float Count:
29 Switching Time: Accuracy:
30 Max. Rated Temperature: Max. Rated Pressure:
33 Housing Material: Mounting:
34 Output Signal: Power Supply:
35 Electrical Connection: Enclosure Class:
36 Display: N/A
1. Level Switch to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers include: Drexelbrook, Omega, and Madison.
Client: USACE NY District
Project No: 119201
Requisition No: SWT-104
Specification: SP-LS-104
General
LS-104
RO Water Storage Tank
T-426
N/A
M-0715
Equipment
Equipment
Nozzle Size, Rating, and Mat'l: 3", 150#, HDPE
6"
TBD
Low-Low, Low, High, High-High
Process
Conditions
Process Fluid: Phase: RO Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7 65
Design Pressure (psig): Design Temp (°F): 150 150
52.0 65.0
55.07
Operating Conditions Min. Normal
0.0 0.0
61.19
PTFE Coated
TBD 4
0.5 seconds
0.39 0.43
67.5 75.0
+/- 0.04 inches
302F 100 bar
Housing
PVC Integral
DPDT 24-VDC
3/4" - NPT N/A
Sensor
Note 4 TBD
Float Vertical
316SS
Misc
Misc:
Notes
INSTRUMENT SPECIFICATION
Level Switches
Sheet 2 of 2
Revision: 0
6 N/A
11 Units Maximum
12 Pressure PSIG 42.0
13 Temperature F 264.0
14 Density lb/ft
65.78
15 Viscosity cP 1.16
16 Flow GPM 195.0
19 Transmitter Manufacturer: Model Number:
22 Process Connection: Electrical Connection:
24 Housing Material: Mounting:
26 Max. Rated Temperature: 250 °F
29 Tag Number: TE-164B
30 Sensor Manufacturer: Model Number: Note 4 TBD
31 Type: Spring Loaded RTD
32 Process Connection: Sheath Material: 1/2" - NPT 316 SS
33 Accuracy: Sensitivity: Mfr. Std. Mfr. Std.
34 Head: Lagging Extension: Integral N/A
35 Insertion Length: 8"
37 Tag Number:
38 Thermowell Manufacturer: Model Number:
39 Insertion Length:
40 Element Connection:
41 Construction: Tapered
43 Other:
1. Temperature Transmitter to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all calculation documents, drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Yokogawa.
Client: USACE NY District
Project No: 119201
Requisition No: SWT-105
Specification: SP-TS-164B
Hot Process Water Heat Exchanger
E-401/402
4"-220HWS-S3304-1315
M-0709
Area Classification:
Instrument Tag:
Service:
Equipment Number:
Line Number:
P&ID Number:
TS-164B
Piping
Line Size:
Pipe Material & Schedule:
4"
SS304
Temperature Switch Single
SPDT
Tag Number: TS-164B
176.0 220.0
Ambient Pressure (psia): Ambient Temp (°F): 14.7 65
Design Pressure (psig): Design Temp (°F): 50 250
Operating Conditions Minimum Normal
28.0 35.0
1" - 150# RF 1/2" - NPT
Type: Input (Single/Dual):
Output Signal: Power Supply:
Display: Enclosure Class:
Switching Time: Max. Rated Pressure:
Revision: 0
24 VDC (Loop Powered)
Sheet 1 of 1
Material:
Process Connection:
INSTRUMENT SPECIFICATION
Temperature Switches
Piping
General
Sch. 40
N/APipe Insulation:
Notes
Misc.
Thermowell
Element
Temperature
Transmiter None N/A
PVC Integral
Standard 100 psi
Note 4 TBD
Wetted 316SS 8"
TW-164B
Process
Conditions
Integral to TC 1/2" NPT
53.82 59.80
LiquidProcess Fluid: Phase: Hot Water
Note 4
0.95 1.05
75.0 150.0
TBD
6 N/A
11 Units Maximum
12 Pressure PSIG 42.0
13 Temperature F 264.0
14 Density lb/ft
65.78
15 Viscosity cP 1.16
16 Flow GPM 195.0
19 Transmitter Manufacturer: Model Number:
22 Process Connection: Electrical Connection:
24 Housing Material: Mounting:
26 Lead Wire Extenstion: N/A
28 Temperature Range
29 Instrument Range
30 Calibration Range
32 Tag Number: TE-111A
33 Sensor Manufacturer: Model Number: Note 4 TBD
34 Type: Spring Loaded RTD
35 Process Connection: Sheath Material: 1/2" - NPT 316 SS
36 Accuracy: Sensitivity: Mfr. Std. Mfr. Std.
37 Head: Lagging Extension: Integral N/A
38 Insertion Length: 8"
40 Tag Number:
41 Thermowell Manufacturer: Model Number:
42 Insertion Length:
43 Element Connection:
44 Construction: Tapered
46 Other:
1. Temperature Transmitter to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all calculation documents, drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Yokogawa.
Client: USACE NY District
Project No: 119201
Requisition No: TRN-101
Specification: SP-TIT-111A
M-0709
Area Classification:
General
Instrument Tag: TIT-111A
Service: Hot Process Water Heat Exchanger
Equipment Number: E-401
Line Number: 4" HWS220-SS304-1313
P&ID Number:
Line Size: 4"
Pipe Material & Schedule: SS304 Sch. 40
Pipe Insulation: N/A
Piping
Piping
Design Temp (°F): 50 250
Operating Conditions Minimum Normal
Process
Conditions
Process Fluid: Phase: Hot Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7 65
Design Pressure (psig):
0.95 1.05
75.0 150.0
28.0 35.0
176.0 220.0
53.82 59.80
Output Signal: Power Supply: 4-20 mA (HART) 24 VDC (Loop Powered)
Integral to TC 1/2" NPT
Temperature
Transmiter
Tag Number: TIT-111A
Note 4 TBD
Type: Input (Single/Dual): Temperature Transmitter Single
Load Resistance: Response Time: N/A < 1 sec
Minimum Maximum
Display: Enclosure Class: LCD N/A
PVC Integral
0 F 300 F
0 F 250 F
Element
Thermowell
TW-111A
Note 4 TBD
Misc.
Notes
INSTRUMENT SPECIFICATION
Temperature Transmitters
Material: Wetted 316SS 8"
Process Connection: 1" - 150# RF 1/2" - NPT
Sheet 1 of 1
Revision: 0
6 N/A
11 Units Maximum
12 Pressure PSIG 42.0
13 Temperature F 264.0
14 Density lb/ft
65.78
15 Viscosity cP 1.16
16 Flow GPM 195.0
19 Transmitter Manufacturer: Model Number:
22 Process Connection: Electrical Connection:
24 Housing Material: Mounting:
26 Lead Wire Extenstion: N/A
28 Temperature Range
29 Instrument Range
30 Calibration Range
32 Tag Number: TE-11B
33 Sensor Manufacturer: Model Number: Note 4 TBD
34 Type: Spring Loaded RTD
35 Process Connection: Sheath Material: 1/2" - NPT 316 SS
36 Accuracy: Sensitivity: Mfr. Std. Mfr. Std.
37 Head: Lagging Extension: Integral N/A
38 Insertion Length: 8"
40 Tag Number:
41 Thermowell Manufacturer: Model Number:
42 Insertion Length:
43 Element Connection:
44 Construction: Tapered
46 Other:
1. Temperature Transmitter to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all calculation documents, drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Yokogawa.
Client: USACE NY District
Project No: 119201
Requisition No: TRN-101
Specification: SP-TIT-111B
M-0709
Area Classification:
General
Instrument Tag: TIT-111B
Service: Hot Process Water Heat Exchanger
Equipment Number: E-401
Line Number: 4" HWS220-SS304-1314
P&ID Number:
Line Size: 4"
Pipe Material & Schedule: SS304 Sch. 40
Pipe Insulation: N/A
Piping
Piping
Design Temp (°F): 50 250
Operating Conditions Minimum Normal
Process
Conditions
Process Fluid: Phase: Hot Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7 65
Design Pressure (psig):
0.95 1.05
75.0 150.0
28.0 35.0
176.0 220.0
53.82 59.80
Output Signal: Power Supply: 4-20 mA (HART) 24 VDC (Loop Powered)
Integral to TC 1/2" NPT
Temperature
Transmiter
Tag Number: TIT-111B
Note 4 TBD
Type: Input (Single/Dual): Temperature Transmitter Single
Load Resistance: Response Time: N/A < 1 sec
Minimum Maximum
Display: Enclosure Class: LCD N/A
PVC Integral
0 F 300 F
0 F 250 F
Element
Thermowell
TW-11B
Note 4 TBD
Misc.
Notes
INSTRUMENT SPECIFICATION
Temperature Transmitters
Material: Wetted 316SS 8"
Process Connection: 1" - 150# RF 1/2" - NPT
Sheet 1 of 1
Revision: 0
6 N/A
11 Units Maximum
12 Pressure PSIG 42.0
13 Temperature F 264.0
14 Density lb/ft
65.78
15 Viscosity cP 1.16
16 Flow GPM 195.0
19 Transmitter Manufacturer: Model Number:
22 Process Connection: Electrical Connection:
24 Housing Material: Mounting:
26 Lead Wire Extenstion: N/A
28 Temperature Range
29 Instrument Range
30 Calibration Range
32 Tag Number: TE-112A
33 Sensor Manufacturer: Model Number: Note 4 TBD
34 Type: Spring Loaded RTD
35 Process Connection: Sheath Material: 1/2" - NPT 316 SS
36 Accuracy: Sensitivity: Mfr. Std. Mfr. Std.
37 Head: Lagging Extension: Integral N/A
38 Insertion Length: 8"
40 Tag Number:
41 Thermowell Manufacturer: Model Number:
42 Insertion Length:
43 Element Connection:
44 Construction: Tapered
46 Other:
1. Temperature Transmitter to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all calculation documents, drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Yokogawa.
Client: USACE NY District
Project No: 119201
Requisition No: TRN-101
Specification: SP-TIT-112A
M-0709
Area Classification:
General
Instrument Tag: TIT-112A
Service: Hot Process Water Heat Exchanger
Equipment Number: N/A
Line Number: 4" HWS220-SS304-1307
P&ID Number:
Line Size: 4"
Pipe Material & Schedule: SS304 Sch. 40
Pipe Insulation: N/A
Piping
Piping
Design Temp (°F): 50 250
Operating Conditions Minimum Normal
Process
Conditions
Process Fluid: Phase: Hot Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7 65
Design Pressure (psig):
0.95 1.05
75.0 150.0
28.0 35.0
176.0 220.0
53.82 59.80
Output Signal: Power Supply: 4-20 mA (HART) 24 VDC (Loop Powered)
Integral to TC 1/2" NPT
Temperature
Transmiter
Tag Number: TIT-112A
Note 4 TBD
Type: Input (Single/Dual): Temperature Transmitter Single
Load Resistance: Response Time: N/A < 1 sec
Minimum Maximum
Display: Enclosure Class: LCD N/A
PVC Integral
0 F 300 F
0 F 250 F
Element
Thermowell
TW-112A
Note 4 TBD
Misc.
Notes
INSTRUMENT SPECIFICATION
Temperature Transmitters
Material: Wetted 316SS 8"
Process Connection: 1" - 150# RF 1/2" - NPT
Sheet 1 of 1
Revision: 0
6 N/A
11 Units Maximum
12 Pressure PSIG 42.0
13 Temperature F 264.0
14 Density lb/ft
65.78
15 Viscosity cP 1.16
16 Flow GPM 195.0
19 Transmitter Manufacturer: Model Number:
22 Process Connection: Electrical Connection:
24 Housing Material: Mounting:
26 Lead Wire Extenstion: N/A
28 Temperature Range
29 Instrument Range
30 Calibration Range
32 Tag Number: TE-12B
33 Sensor Manufacturer: Model Number: Note 4 TBD
34 Type: Spring Loaded RTD
35 Process Connection: Sheath Material: 1/2" - NPT 316 SS
36 Accuracy: Sensitivity: Mfr. Std. Mfr. Std.
37 Head: Lagging Extension: Integral N/A
38 Insertion Length: 8"
40 Tag Number:
41 Thermowell Manufacturer: Model Number:
42 Insertion Length:
43 Element Connection:
44 Construction: Tapered
46 Other:
1. Temperature Transmitter to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all calculation documents, drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Yokogawa.
Client: USACE NY District
Project No: 119201
Requisition No: TRN-101
Specification: SP-TIT-112B
M-0709
Area Classification:
General
Instrument Tag: TIT-112B
Service: Hot Process Water Heat Exchanger
Equipment Number: E-402
Line Number: 4" HWS220-SS304-1308
P&ID Number:
Line Size: 4"
Pipe Material & Schedule: SS304 Sch. 40
Pipe Insulation: N/A
Piping
Piping
Design Temp (°F): 50 250
Operating Conditions Minimum Normal
Process
Conditions
Process Fluid: Phase: Hot Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7 65
Design Pressure (psig):
0.95 1.05
75.0 150.0
28.0 35.0
176.0 220.0
53.82 59.80
Output Signal: Power Supply: 4-20 mA (HART) 24 VDC (Loop Powered)
Integral to TC 1/2" NPT
Temperature
Transmiter
Tag Number: TIT-112B
Note 4 TBD
Type: Input (Single/Dual): Temperature Transmitter Single
Load Resistance: Response Time: N/A < 1 sec
Minimum Maximum
Display: Enclosure Class: LCD N/A
PVC Integral
0 F 300 F
0 F 250 F
Element
Thermowell
TW-12B
Note 4 TBD
Misc.
Notes
INSTRUMENT SPECIFICATION
Temperature Transmitters
Material: Wetted 316SS 8"
Process Connection: 1" - 150# RF 1/2" - NPT
Sheet 1 of 1
Revision: 0
6 N/A
11 Units Maximum
12 Pressure PSIG 78.0
13 Temperature F 102.0
14 Density lb/ft
68.39
15 Viscosity cP 0.95
16 Flow GPM 91.0
19 Transmitter Manufacturer: Model Number:
22 Process Connection: Electrical Connection:
24 Housing Material: Mounting:
26 Lead Wire Extenstion: N/A
28 Temperature Range
29 Instrument Range
30 Calibration Range
32 Tag Number: TE-193K
33 Sensor Manufacturer: Model Number: Note 4 TBD
34 Type: Spring Loaded RTD
35 Process Connection: Sheath Material: 1/2" - NPT 316 SS
36 Accuracy: Sensitivity: Mfr. Std. Mfr. Std.
37 Head: Lagging Extension: Integral N/A
38 Insertion Length: 6.5"
40 Tag Number:
41 Thermowell Manufacturer: Model Number:
42 Insertion Length:
43 Element Connection:
44 Construction: Tapered
46 Other:
1. Temperature Transmitter to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all calculation documents, drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Yokogawa.
Client: USACE NY District
Project No: 119201
Requisition No: TRN-101
Specification: SP-TIT-193K Revision: 0
Temperature Transmitters
Material: Wetted 316SS 6.5"
Process Connection: 1" - 150# RF 1/2" - NPT
Sheet 1 of 1
Thermowell
TW-193K
Note 4 TBD
Misc.
Notes
INSTRUMENT SPECIFICATION
LCD N/A
PVC Integral
0 F 300 F
0 F 250 F
Element
Output Signal: Power Supply: 4-20 mA (HART) 24 VDC (Loop Powered)
Integral to TC 1/2" NPT
Temperature
Transmiter
Tag Number: TIT-193K
Note 4 TBD
Type: Input (Single/Dual): Temperature Transmitter Single
Load Resistance: Response Time: N/A < 1 sec
Minimum Maximum
Display: Enclosure Class:
70.0
52.0 65.0
68.0 85.0
55.95 62.17
Piping
Piping
Design Temp (°F): 150 180
Operating Conditions Minimum Normal
Process
Conditions
Process Fluid: Phase: Cold Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7 psia 80 °F
Design Pressure (psig):
0.77 0.86
35.0
Line Size: 1"
Pipe Material & Schedule: SS304 Sch. 40
Pipe Insulation: N/A
M-0710
Area Classification:
General
Instrument Tag: TIT-193K
Service: Cold Water Circulation Header
Equipment Number: RE-305
Line Number: 1" CWR-SS304-1160
P&ID Number:
6 N/A
11 Units Maximum
12 Pressure PSIG 78.0
13 Temperature F 102.0
14 Density lb/ft
68.39
15 Viscosity cP 0.95
16 Flow GPM 91.0
19 Transmitter Manufacturer: Model Number:
22 Process Connection: Electrical Connection:
24 Housing Material: Mounting:
26 Lead Wire Extenstion: N/A
28 Temperature Range
29 Instrument Range
30 Calibration Range
32 Tag Number: TE-193L
33 Sensor Manufacturer: Model Number: Note 4 TBD
34 Type: Spring Loaded RTD
35 Process Connection: Sheath Material: 1/2" - NPT 316 SS
36 Accuracy: Sensitivity: Mfr. Std. Mfr. Std.
37 Head: Lagging Extension: Integral N/A
38 Insertion Length: 6.5"
40 Tag Number:
41 Thermowell Manufacturer: Model Number:
42 Insertion Length:
43 Element Connection:
44 Construction: Tapered
46 Other:
1. Temperature Transmitter to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all calculation documents, drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Yokogawa.
Client: USACE NY District
Project No: 119201
Requisition No: TRN-101
Specification: SP-TIT-193L Revision: 0
Temperature Transmitters
Material: Wetted 316SS 6.5"
Process Connection: 1" - 150# RF 1/2" - NPT
Sheet 1 of 1
Thermowell
TW-193L
Note 4 TBD
Misc.
Notes
INSTRUMENT SPECIFICATION
LCD N/A
PVC Integral
0 F 300 F
0 F 250 F
Element
Output Signal: Power Supply: 4-20 mA (HART) 24 VDC (Loop Powered)
Integral to TC 1/2" NPT
Temperature
Transmiter
Tag Number: TIT-193L
Note 4 TBD
Type: Input (Single/Dual): Temperature Transmitter Single
Load Resistance: Response Time: N/A < 1 sec
Minimum Maximum
Display: Enclosure Class:
70.0
52.0 65.0
68.0 85.0
55.95 62.17
Piping
Piping
Design Temp (°F): 150 180
Operating Conditions Minimum Normal
Process
Conditions
Process Fluid: Phase: Cold Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7 psia 80 °F
Design Pressure (psig):
0.77 0.86
35.0
Line Size: 1"
Pipe Material & Schedule: SS304 Sch. 40
Pipe Insulation: N/A
M-0710
Area Classification:
General
Instrument Tag: TIT-193L
Service: Cold Water Circulation Header
Equipment Number: RE-304
Line Number: 1" CWR-SS304-1162
P&ID Number:
6 N/A
11 Units Maximum
12 Pressure PSIG 78.0
13 Temperature F 102.0
14 Density lb/ft
68.39
15 Viscosity cP 0.95
16 Flow GPM 91.0
19 Transmitter Manufacturer: Model Number:
22 Process Connection: Electrical Connection:
24 Housing Material: Mounting:
26 Lead Wire Extenstion: N/A
28 Temperature Range
29 Instrument Range
30 Calibration Range
32 Tag Number: TE-193M
33 Sensor Manufacturer: Model Number: Note 4 TBD
34 Type: Spring Loaded RTD
35 Process Connection: Sheath Material: 1/2" - NPT 316 SS
36 Accuracy: Sensitivity: Mfr. Std. Mfr. Std.
37 Head: Lagging Extension: Integral N/A
38 Insertion Length: 6.5"
40 Tag Number:
41 Thermowell Manufacturer: Model Number:
42 Insertion Length:
43 Element Connection:
44 Construction: Tapered
46 Other:
1. Temperature Transmitter to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all calculation documents, drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Yokogawa.
Client: USACE NY District
Project No: 119201
Requisition No: TRN-101
Specification: SP-TIT-193M Revision: 0
Temperature Transmitters
Material: Wetted 316SS 6.5"
Process Connection: 1" - 150# RF 1/2" - NPT
Sheet 1 of 1
Thermowell
TW-193M
Note 4 TBD
Misc.
Notes
INSTRUMENT SPECIFICATION
LCD N/A
PVC Integral
0 F 300 F
0 F 250 F
Element
Output Signal: Power Supply: 4-20 mA (HART) 24 VDC (Loop Powered)
Integral to TC 1/2" NPT
Temperature
Transmiter
Tag Number: TIT-193M
Note 4 TBD
Type: Input (Single/Dual): Temperature Transmitter Single
Load Resistance: Response Time: N/A < 1 sec
Minimum Maximum
Display: Enclosure Class:
70.0
52.0 65.0
68.0 85.0
55.95 62.17
Piping
Piping
Design Temp (°F): 150 180
Operating Conditions Minimum Normal
Process
Conditions
Process Fluid: Phase: Cold Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7 psia 80 °F
Design Pressure (psig):
0.77 0.86
35.0
Line Size: 1"
Pipe Material & Schedule: SS304 Sch. 40
Pipe Insulation: N/A
M-0710
Area Classification:
General
Instrument Tag: TIT-193M
Service: Cold Water Circulation Header
Equipment Number: RE-303
Line Number: 1" CWR-SS304-1164
P&ID Number:
6 N/A
11 Units Maximum
12 Pressure PSIG 78.0
13 Temperature F 102.0
14 Density lb/ft
68.39
15 Viscosity cP 0.95
16 Flow GPM 91.0
19 Transmitter Manufacturer: Model Number:
22 Process Connection: Electrical Connection:
24 Housing Material: Mounting:
26 Lead Wire Extenstion: N/A
28 Temperature Range
29 Instrument Range
30 Calibration Range
32 Tag Number: TE-193N
33 Sensor Manufacturer: Model Number: Note 4 TBD
34 Type: Spring Loaded RTD
35 Process Connection: Sheath Material: 1/2" - NPT 316 SS
36 Accuracy: Sensitivity: Mfr. Std. Mfr. Std.
37 Head: Lagging Extension: Integral N/A
38 Insertion Length: 6.5"
40 Tag Number:
41 Thermowell Manufacturer: Model Number:
42 Insertion Length:
43 Element Connection:
44 Construction: Tapered
46 Other:
1. Temperature Transmitter to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all calculation documents, drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Yokogawa.
Client: USACE NY District
Project No: 119201
Requisition No: TRN-101
Specification: SP-TIT-193N Revision: 0
Temperature Transmitters
Material: Wetted 316SS 6.5"
Process Connection: 1" - 150# RF 1/2" - NPT
Sheet 1 of 1
Thermowell
TW-193N
Note 4 TBD
Misc.
Notes
INSTRUMENT SPECIFICATION
LCD N/A
PVC Integral
0 F 300 F
0 F 250 F
Element
Output Signal: Power Supply: 4-20 mA (HART) 24 VDC (Loop Powered)
Integral to TC 1/2" NPT
Temperature
Transmiter
Tag Number: TIT-193N
Note 4 TBD
Type: Input (Single/Dual): Temperature Transmitter Single
Load Resistance: Response Time: N/A < 1 sec
Minimum Maximum
Display: Enclosure Class:
70.0
52.0 65.0
68.0 85.0
55.95 62.17
Piping
Piping
Design Temp (°F): 150 180
Operating Conditions Minimum Normal
Process
Conditions
Process Fluid: Phase: Cold Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7 psia 80 °F
Design Pressure (psig):
0.77 0.86
35.0
Line Size: 1"
Pipe Material & Schedule: SS304 Sch. 40
Pipe Insulation: N/A
M-0710
Area Classification:
General
Instrument Tag: TIT-193N
Service: Cold Water Circulation Header
Equipment Number: RE-205
Line Number: 1" CWR-SS304-1166
P&ID Number:
6 N/A
11 Units Maximum
12 Pressure PSIG 78.0
13 Temperature F 102.0
14 Density lb/ft
68.39
15 Viscosity cP 0.95
16 Flow GPM 91.0
19 Transmitter Manufacturer: Model Number:
22 Process Connection: Electrical Connection:
24 Housing Material: Mounting:
26 Lead Wire Extenstion: N/A
28 Temperature Range
29 Instrument Range
30 Calibration Range
32 Tag Number: TE-193P
33 Sensor Manufacturer: Model Number: Note 4 TBD
34 Type: Spring Loaded RTD
35 Process Connection: Sheath Material: 1/2" - NPT 316 SS
36 Accuracy: Sensitivity: Mfr. Std. Mfr. Std.
37 Head: Lagging Extension: Integral N/A
38 Insertion Length: 6.5"
40 Tag Number:
41 Thermowell Manufacturer: Model Number:
42 Insertion Length:
43 Element Connection:
44 Construction: Tapered
46 Other:
1. Temperature Transmitter to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all calculation documents, drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Yokogawa.
Client: USACE NY District
Project No: 119201
Requisition No: TRN-101
Specification: SP-TIT-193P Revision: 0
Temperature Transmitters
Material: Wetted 316SS 6.5"
Process Connection: 1" - 150# RF 1/2" - NPT
Sheet 1 of 1
Thermowell
TW-193P
Note 4 TBD
Misc.
Notes
INSTRUMENT SPECIFICATION
LCD N/A
PVC Integral
0 F 300 F
0 F 250 F
Element
Output Signal: Power Supply: 4-20 mA (HART) 24 VDC (Loop Powered)
Integral to TC 1/2" NPT
Temperature
Transmiter
Tag Number: TIT-193P
Note 4 TBD
Type: Input (Single/Dual): Temperature Transmitter Single
Load Resistance: Response Time: N/A < 1 sec
Minimum Maximum
Display: Enclosure Class:
70.0
52.0 65.0
68.0 85.0
55.95 62.17
Piping
Piping
Design Temp (°F): 150 180
Operating Conditions Minimum Normal
Process
Conditions
Process Fluid: Phase: Cold Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7 psia 80 °F
Design Pressure (psig):
0.77 0.86
35.0
Line Size: 1"
Pipe Material & Schedule: SS304 Sch. 40
Pipe Insulation: N/A
M-0710
Area Classification:
General
Instrument Tag: TIT-193P
Service: Cold Water Circulation Header
Equipment Number: RE-204
Line Number: 1" CWR-SS304-1168
P&ID Number:
6 N/A
11 Units Maximum
12 Pressure PSIG 78.0
13 Temperature F 102.0
14 Density lb/ft
68.39
15 Viscosity cP 0.95
16 Flow GPM 91.0
19 Transmitter Manufacturer: Model Number:
22 Process Connection: Electrical Connection:
24 Housing Material: Mounting:
26 Lead Wire Extenstion: N/A
28 Temperature Range
29 Instrument Range
30 Calibration Range
32 Tag Number: TE-194A
33 Sensor Manufacturer: Model Number: Note 4 TBD
34 Type: Spring Loaded RTD
35 Process Connection: Sheath Material: 1/2" - NPT 316 SS
36 Accuracy: Sensitivity: Mfr. Std. Mfr. Std.
37 Head: Lagging Extension: Integral N/A
38 Insertion Length: 6.5"
40 Tag Number:
41 Thermowell Manufacturer: Model Number:
42 Insertion Length:
43 Element Connection:
44 Construction: Tapered
46 Other:
1. Temperature Transmitter to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all calculation documents, drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Yokogawa.
Client: USACE NY District
Project No: 119201
Requisition No: TRN-101
Specification: SP-TIT-194A Revision: 0
Temperature Transmitters
Material: Wetted 316SS 6.5"
Process Connection: 1" - 150# RF 1/2" - NPT
Sheet 1 of 1
Thermowell
TW-194A
Note 4 TBD
Misc.
Notes
INSTRUMENT SPECIFICATION
LCD N/A
PVC Integral
0 F 300 F
0 F 250 F
Element
Output Signal: Power Supply: 4-20 mA (HART) 24 VDC (Loop Powered)
Integral to TC 1/2" NPT
Temperature
Transmiter
Tag Number: TIT-194A
Note 4 TBD
Type: Input (Single/Dual): Temperature Transmitter Single
Load Resistance: Response Time: N/A < 1 sec
Minimum Maximum
Display: Enclosure Class:
70.0
52.0 65.0
68.0 85.0
55.95 62.17
Piping
Piping
Design Temp (°F): 150 180
Operating Conditions Minimum Normal
Process
Conditions
Process Fluid: Phase: Cold Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7 psia 80 °F
Design Pressure (psig):
0.77 0.86
35.0
Line Size: 1"
Pipe Material & Schedule: SS304 Sch. 40
Pipe Insulation: N/A
M-0710
Area Classification:
General
Instrument Tag: TIT-194A
Service: Cold Water Circulation Header
Equipment Number: RE-302
Line Number: 1" CWR-SS304-1158
P&ID Number:
6 N/A
11 Units Maximum
12 Pressure PSIG 78.0
13 Temperature F 102.0
14 Density lb/ft
68.39
15 Viscosity cP 0.95
16 Flow GPM 91.0
19 Transmitter Manufacturer: Model Number:
22 Process Connection: Electrical Connection:
24 Housing Material: Mounting:
26 Lead Wire Extenstion: N/A
28 Temperature Range
29 Instrument Range
30 Calibration Range
32 Tag Number: TE-193K
33 Sensor Manufacturer: Model Number: Note 4 TBD
34 Type: Spring Loaded RTD
35 Process Connection: Sheath Material: 1/2" - NPT 316 SS
36 Accuracy: Sensitivity: Mfr. Std. Mfr. Std.
37 Head: Lagging Extension: Integral N/A
38 Insertion Length: 6.5"
40 Tag Number:
41 Thermowell Manufacturer: Model Number:
42 Insertion Length:
43 Element Connection:
44 Construction: Tapered
46 Other:
1. Temperature Transmitter to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all calculation documents, drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Yokogawa.
Client: USACE NY District
Project No: 119201
Requisition No: TRN-101
Specification: SP-TIT-193K Revision: 0
Temperature Transmitters
Material: Wetted 316SS 6.5"
Process Connection: 1" - 150# RF 1/2" - NPT
Sheet 1 of 1
Thermowell
TW-193K
Note 4 TBD
Misc.
Notes
INSTRUMENT SPECIFICATION
LCD N/A
PVC Integral
0 F 300 F
0 F 250 F
Element
Output Signal: Power Supply: 4-20 mA (HART) 24 VDC (Loop Powered)
Integral to TC 1/2" NPT
Temperature
Transmiter
Tag Number: TIT-193K
Note 4 TBD
Type: Input (Single/Dual): Temperature Transmitter Single
Load Resistance: Response Time: N/A < 1 sec
Minimum Maximum
Display: Enclosure Class:
70.0
52.0 65.0
68.0 85.0
55.95 62.17
Piping
Piping
Design Temp (°F): 150 180
Operating Conditions Minimum Normal
Process
Conditions
Process Fluid: Phase: Cold Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7 psia 80 °F
Design Pressure (psig):
0.77 0.86
35.0
Line Size: 1"
Pipe Material & Schedule: SS304 Sch. 40
Pipe Insulation: N/A
M-0710
Area Classification:
General
Instrument Tag: TIT-193K
Service: Cold Water Circulation Header
Equipment Number: RE-301
Line Number: 1" CWR-SS304-1160
P&ID Number:
6 N/A
11 Units Maximum
12 Pressure PSIG 78.0
13 Temperature F 102.0
14 Density lb/ft
68.39
15 Viscosity cP 0.95
16 Flow GPM 91.0
19 Transmitter Manufacturer: Model Number:
22 Process Connection: Electrical Connection:
24 Housing Material: Mounting:
26 Lead Wire Extenstion: N/A
28 Temperature Range
29 Instrument Range
30 Calibration Range
32 Tag Number: TE-193L
33 Sensor Manufacturer: Model Number: Note 4 TBD
34 Type: Spring Loaded RTD
35 Process Connection: Sheath Material: 1/2" - NPT 316 SS
36 Accuracy: Sensitivity: Mfr. Std. Mfr. Std.
37 Head: Lagging Extension: Integral N/A
38 Insertion Length: 6.5"
40 Tag Number:
41 Thermowell Manufacturer: Model Number:
42 Insertion Length:
43 Element Connection:
44 Construction: Tapered
46 Other:
1. Temperature Transmitter to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all calculation documents, drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Yokogawa.
Client: USACE NY District
Project No: 119201
Requisition No: TRN-101
Specification: SP-TIT-193L Revision: 0
Temperature Transmitters
Material: Wetted 316SS 6.5"
Process Connection: 1" - 150# RF 1/2" - NPT
Sheet 1 of 1
Thermowell
TW-193L
Note 4 TBD
Misc.
Notes
INSTRUMENT SPECIFICATION
LCD N/A
PVC Integral
0 F 300 F
0 F 250 F
Element
Output Signal: Power Supply: 4-20 mA (HART) 24 VDC (Loop Powered)
Integral to TC 1/2" NPT
Temperature
Transmiter
Tag Number: TIT-193L
Note 4 TBD
Type: Input (Single/Dual): Temperature Transmitter Single
Load Resistance: Response Time: N/A < 1 sec
Minimum Maximum
Display: Enclosure Class:
70.0
52.0 65.0
68.0 85.0
55.95 62.17
Piping
Piping
Design Temp (°F): 150 180
Operating Conditions Minimum Normal
Process
Conditions
Process Fluid: Phase: Cold Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7 psia 80 °F
Design Pressure (psig):
0.77 0.86
35.0
Line Size: 1"
Pipe Material & Schedule: SS304 Sch. 40
Pipe Insulation: N/A
M-0710
Area Classification:
General
Instrument Tag: TIT-193L
Service: Cold Water Circulation Header
Equipment Number: RE-203
Line Number: 1" CWR-SS304-1162
P&ID Number:
6 N/A
11 Units Maximum
12 Pressure PSIG 78.0
13 Temperature F 102.0
14 Density lb/ft
68.39
15 Viscosity cP 0.95
16 Flow GPM 91.0
19 Transmitter Manufacturer: Model Number:
22 Process Connection: Electrical Connection:
24 Housing Material: Mounting:
26 Lead Wire Extenstion: N/A
28 Temperature Range
29 Instrument Range
30 Calibration Range
32 Tag Number: TE-193M
33 Sensor Manufacturer: Model Number: Note 4 TBD
34 Type: Spring Loaded RTD
35 Process Connection: Sheath Material: 1/2" - NPT 316 SS
36 Accuracy: Sensitivity: Mfr. Std. Mfr. Std.
37 Head: Lagging Extension: Integral N/A
38 Insertion Length: 6.5"
40 Tag Number:
41 Thermowell Manufacturer: Model Number:
42 Insertion Length:
43 Element Connection:
44 Construction: Tapered
46 Other:
1. Temperature Transmitter to be equipped w/ 316SST Instrument Tag, permanently attached.
2. Provide Mounting Hardware, if necessary.
3. Provide all calculation documents, drawings, calibration certifications, quality documentation, where applicable.
4. Acceptable manufacturers can include: Rosemount, Endress & Hauser, and Yokogawa.
Client: USACE NY District
Project No: 119201
Requisition No: TRN-101
Specification: SP-TIT-193M Revision: 0
Temperature Transmitters
Material: Wetted 316SS 6.5"
Process Connection: 1" - 150# RF 1/2" - NPT
Sheet 1 of 1
Thermowell
TW-193M
Note 4 TBD
Misc.
Notes
INSTRUMENT SPECIFICATION
LCD N/A
PVC Integral
0 F 300 F
0 F 250 F
Element
Output Signal: Power Supply: 4-20 mA (HART) 24 VDC (Loop Powered)
Integral to TC 1/2" NPT
Temperature
Transmiter
Tag Number: TIT-193M
Note 4 TBD
Type: Input (Single/Dual): Temperature Transmitter Single
Load Resistance: Response Time: N/A < 1 sec
Minimum Maximum
Display: Enclosure Class:
70.0
52.0 65.0
68.0 85.0
55.95 62.17
Piping
Piping
Design Temp (°F): 150 180
Operating Conditions Minimum Normal
Process
Conditions
Process Fluid: Phase: Cold Water Liquid
Ambient Pressure (psia): Ambient Temp (°F): 14.7 psia 80 °F
Design Pressure (psig):
0.77 0.86
35.0
Line Size: 1"
Pipe Material & Schedule: SS304 Sch. 40
Pipe Insulation: N/A
M-0710
Area Classification:
General
Instrument Tag: TIT-193M
Service: Cold Water Circulation Header
Equipment Number: RE-202
Line Number: 1" CWR-SS304-1164
P&ID Number:
6 N/A
11 Units Maximum
12 Pressure PSIG 78.0
13 Temperature F 102.0
14 Density lb/ft
68.39
15 Viscosity cP 0.95
16 Flow GPM 91.0
19 Transmitter Manufacturer: Model Number:
22 Process Connection: Electrical Connection:
24…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .