Section_31_60_16.16.pdf

Minish Contract No. 3A, NJ MINISH3A

SECTION 31 62 16.16

STEEL H-PILES, INCLUDING STEEL WIDE FLANGE BEAMS

11/11

PART 1 GENERAL

1.1 GENERAL REQUIREMENTS

The work includes furnishing, delivering, handling, and installing (as appropriate, including pre-drilling, if/where necessary) all material, labor, equipment, tools and incidentals necessary to complete the work specified herein.

1.2 REFERENCES

The publications listed below form a part of this specification to the extent referenced. The publications are referred to in the text by basic designation only.

AMERICAN WELDING SOCIETY (AWS)

AWS D1.1/D1.1M (2015; Errata 1 2015; Errata 2 2016) Structural Welding Code - Steel

ASTM INTERNATIONAL (ASTM)

ASTM A6/A6M (2017) Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

ASTM A690/A690M (2013a) Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments

1.3 SUBMITTALS

Government approval is required for submittals with a "G" designation;

submittals not having a "G" designation are for information only. When used, a designation following the "G" designation identifies the office that will review the submittal for the Government. Submit the following in accordance with Section 01 33 00.00 18 SUBMITTAL PROCEDURES:

SD-01 Preconstruction Submittals

Equipment; G, RO.

Descriptions of all pile driving equipment to be employed in the work, prior to commencement of pile installations, including details of the pile hammer, power plant, leads, cushion material, and helmet.

SD-02 Shop Drawings

Pile splices; G, DO

SECTION 31 62 16.16 Page 1

Amendment 11