Pages_from_RFI_Responses_+_(A007)_MInish_3A_27Sep2019.pdf

License & Permit No. 8393 140 Eleventh St. Piscataway, NJ 08854

Tel: (732) 968-9400 Fax: (732) 968-8880

Newark Riverfront Park Phase C

City of Newark, New Jersey

Item: XBE-1 FAI-GON #6

Approved As Submitted

By: Frank De Sousa

Date: 3/21/2019

Section:265619

Newark Riverfront Park Phase C Submittal # 265619-2.0 (#548.0) Spec. Section # 265619-1.4 & 1.5

XBE-1 & -1A GUARDRAIL LED LIGHTING SUBMITTAL/SHOP DRAWING

Vendor-Sub: Fai-Gon Electrical Contractors Submitted by: Tomco Construction Inc.

Date: 3/27/2019

Compatible LED Drivers or Modules

Typical DC input Voltage to Module ……………………………………..………………………….….…………………………… 12VDC

Ratings and Performance Specifications Nominal DC Power Consumption ………………..…………………………………….…………….……...................... See Table 1 Recommended Screw Installation Torque …………………………………………………………….….…. 75 inch ounces Maximum Operating Range Ambient Temperature (Ta) ………………………….….……..….….. -40 to +50°C Maximum Solder Pad Temperature (Ts) …………………………………………….…….………………………...….………. +105°C Estimated Lumen Depreciation (TM-21) ….………….…70% initial lumens (L70) @ 100,000 hours Nominal Weight ……………………………………………………………………….…………………….…………………….……………..… 10 grams Safety/Compliance UL Class 2 Recognized Component............................................................... E321468

Application Notes

1. ThermAdjust™ technology automatically reduces LED current to maintain solder pad temperatures below the maximum solder pad temperature (Ts). This ensures longer LED lifetime and is ideal for luminaires that have the potential to be placed in environments with elevated ambient temperatures.

2. The use of any washer (lock, flat, etc.) will void the warranty due to possible damage and/or shorting to the circuit board.

3. This module requires a heat sink at full power for maximum performance. Care should be taken in the luminaire designs to allow heat to escape the system. Contact factory for thermal guidelines.

4. Abnormal operating conditions such as elevated ambient temperatures can be expected to negatively impact lumen output, product lifetime and/or performance.

Small ThermAdjustTM Module For a Variety of Applications

Features & Benefits

Constant voltage 12VDC input design allows paralleling of any number of modules up to the maximum wattage of driver Patent pending Thermadjust™ temperature compensation technology provides “fool proof” thermal management Latest generation LED for high efficacy and color consistency Patented intelligent thermal design FR4 core board with heavy copper Includes mounting holes and high performance adhesive transfer tape for mechanical attachment Reverse polarity protection and pre-wired leads Protective conformal (transparent) coating for additional protection in exterior applications

B B

B A

S eries

January 2019, Rev. H 14331 Chambers Road, Tustin CA 92780 714.508.0729 customerservice@permlight.com

B B

B A

S eries

Table 1, Performance Characteristics at 25C Data from laboratory test measurements, actual results may vary.

Options available Other CCT and CRI may be available on special order 90CRI minimum versions on special order, subtract 15% lumens

Packaging Product is marked with SKU and lot information on non-LED side of module.

Sold in groups of (85) unit(s) and packaged in ESD bags with SKU and lot information.

Warranty 5-Year limited warranty in accordance with published warranty conditions. Product must be used with compatible components (modules, drivers, engines and/or accessories) and no maximum ratings (such as Ts) shall be exceeded during any expected operating conditions of the system. If product is used with other manufacturer’s product, compatibility must be recognized in writing by Permlight Technologies.

Permlight Technologies owns the following United States patents of which one or more may be applicable to the design and/or manufacture of this product: 6712486, 6578986, 6846093, 7114831, 7306353, 7102172, 7108396, 7329024, 7387406, 7582911, 7649327, 8926145, 8729810. Additional granted patents, patents pending and other IP protection rights may apply.

Part Number

Nominal

CCT

(Kelvin) Minimum

CRI

Nominal Light Output

@ 12VDC

(Lumens)

Nominal Power

Consumption

@ 12VDC

(WDC)

Nominal Module Efficacy

@12VDC

(DC LPW)

BB09BA-27-80-01 2700 80 303 3.06 99

BB09BA-30-80-01 3000 80 316 3.06 103

BB09BA-35-80-01 3500 80 325 3.06 106

BB09BA-40-80-01 4000 80 330 3.06 108

BB09BA-50-80-01 5000 80 360 3.06 118

14331 Chambers Road, Tustin CA 92780 714.508.0729 customerservice@permlight.com

Physical Dimensions

Site Access:

1. Traffic plan

2. MT120 form – Application for highway occupancy (PDF attachment)

3. Final temporary easement plan (PDF attachment - KMZ file)

D

G20-2A

G20-2A

Lane

Lane

Shoulder

Shoulder

Lane

Lane B

S S S S S S

D

D

D

D

DDDDDDD

D

D

D

D

VARIESBUFFER

L/3

Lane

Lane

Shoulder

Shoulder

Lane

Lane

MedianMedian S S S S S S

W4-2 (S)

L

L/3L/3L/3

B

W4-2 (S)

W20-1D W20-1D

W20-1DW20-1D

W20-5A

W20-5A

W20-5B

W20-5B

NOTES:

G20-2A

Shoulder

Lane

Lane

Shoulder

G20-2A

Lane

Lane

D

D

D

DD

D

D

D

DDDDDDDD

D

S S S

Lane

S S

L/3

BUFFER VARIES

Lane

Lane

Lane

Shoulder

Shoulder

Median MedianS S S

S

S S

B

W20-1D W20-1D

W20-1DW20-1D

W20-1A

W20-1A

W20-10C

W20-10C

TCD-14

100’

48" x 48" 48" x 48" 48" x 48" 48" x 48" 48" x 24"

500’ 100’ 500’

48" x 24"48" x 48" 48" x 48" 48" x 48" 48" x 48"

48" x 48" 48" x 48" 48" x 48" 48" x 48" 48" x 48" 48" x 24"

48" x 24"

500’

W1-6, 48" x 24" (3)

48" x 48" 48" x 48" 48" x 48" 48" x 48" 48" x 48"

500’ 500’ 500’

4 & 6 LANES, DIVIDED, SHOULDER CLOSING

4 & 6 LANES, DIVIDED, RIGHT LANE & SHOULDER CLOSING

NEW JERSEY DEPARTMENT OF TRANSPORTATION

TRAFFIC CONTROL DETAILS

1.

2.

100’

MIN.

N.T.S.

ROAD

WORK

1 MILE

ROAD

WORK

1500 FT

SHOULDER

CLOSED

500 FT

ROAD

WORK

1 MILE

ROAD

WORK

1500 FT

SHOULDER

CLOSED

500 FT

ROAD

WORK

1 MILE

RIGHT LANE

CLOSED

1500 FT

RIGHT LANE

CLOSED

1000 FT

ROAD

WORK

1 MILE

RIGHT LANE

CLOSED

1500 FT

RIGHT LANE

CLOSED

1000 FT

ROAD

WORK

�MILE

ROAD

WORK

�MILE

ROAD

WORK

�MILE

ROAD

WORK

�MILE

T P

X O

H A

S

E P

N j d o t p r j w s v s y s t e m

N

J D

O T

W S

P r o j e c t s N

J D

O T

E

ID

d a t e p e n t a b l e s c a l e file=

SEE RECOMMENDED TAPER LENGTH AND

SPACING TABLE ON SHEET TCD-2 FOR

VALUES OF L, B AND D.

IF MEDIAN IS NARROWER THAN WIDTH OF

SIGN PLUS 2 FEET, OMIT MEDIAN SIGNING.

END

ROAD WORK

END

ROAD WORK

END

ROAD WORK

END

ROAD WORK

WORK

AREA

100’

MIN.

WORK

AREA2640’ 1140’

2640’ 1140’

1000’

THIS SIGN SHALL BE INSTALLED FOR ROADS WITH

A SPEED LIMIT OF 45 M.P.H. OR GREATER UNLESS

OTHERWISE DIRECTED BY THE RE.

FOR ROADS WITH A SPEED LIMIT GREATER THAN

55 M.P.H., A "ROAD WORK 2 MILES" SIGN SHALL

ALSO BE INSTALLED 2 MILES IN ADVANCE OF

LANE CLOSING UNLESS OTHERWISE DIRECTED BY

THE RE.

B D

C D

-0

O R

IG

IN

A L

S H

E E

T