Attachment_02_-_Area_02_OF-WI_PWS.pdf

KANSAS CITY DISTRICT

CORPS OF ENGINEERS

PERFORMANCE WORK STATEMENT

Mowing and Trimming Services

Lucas Park, Minooka Park, Marshall Cove Wilson Lake, KS

C.1 General Information

C.1.1 Background. Wilson Lake, located on the Saline River, controls a drainage area of 1,917 square miles. The grassland drainage basin above Wilson makes it one of the clearest lakes in Kansas. With 9,000 acres of water and 100 miles of shoreline, it has become one of the most popular recreation areas in central Kansas. During periods of heavy rain the lake increases in size, as runoff is stored, providing downstream flood protection. Recreation, fish and wildlife enhancement, and water quality also are benefits of the lake.

To get to the Wilson Project Office, from I-70 take Exit 206 north on Highway 232 for eight miles. Prior to crossing Wilson Dam, turn right on Highway 181. Turn left on Outlet Boulevard and the Wilson Project Office will be the first building on the left, watch for signs.

C.1.2 Scope of Work: The Contractor shall provide all manpower, equipment, fuel, tools, supervision and other items and services necessary to provide mowing and trimming of public use areas for the U. S. Army Corps of Engineers, Wilson Project, as described in the attached performance work statement and elsewhere in the contract.

C.1.3 Post-Award Conference After award, but prior to commencement of work, the Contractor shall contact the Contracting Officer’s Representative, to arrange a mutually agreeable time to meet at the Wilson Project Office to review the requirements and details of the work.

C.1.4 REQUIRED INSURANCE: The Contractor shall provide and maintain during the entire performance of this contract, at least the type and minimum amounts of insurance required below. Before commencing work under this contract, the Contractor shall present to the Contracting Officer proof of the required insurance.

REQUIRED INSURANCE SCHEDULE

TYPE AMOUNT

Worker's Compensation Coverage complying with Applicable State Statute

Employer's Liability Minimum amount of $100,000.00

General Liability on Minimum limits of $500,000.00 per Comprehensive form of policy occurrence of bodily injury which includes, but is not limited to: insurance for all work required herein.

Comprehensive Automobile Liability Minimum limits for $200,000.00 per Person and $500,000.00 per occurrence for bodily injury, and $20,000.00 per occurrence for property damage.

3. NOTE: Coverage required above are minimums. If State Statute requires higher limits of coverage, the Contractor shall be responsible for obtaining such additional coverage.

Information regarding State requirements may be obtained by contacting:

KANSAS: Insurance Commissioner, Toll Free, 1-800-432-2484 Division of Workers Compensation, 913-296-3071

C.1.5 Quality Control

C.1.5.1 The Contractor shall designate, in writing, a responsible on-site representative of each work crew who shall serve as a contact for matters involving quality, performance or non-performance of the required work assigned to that crew. The representative shall have the authority to correct non-performance. The Contracting Officer may disapprove any individual whom he considers to be incompetent to perform the work required. Such disapproval will be given to the Contractor by written notice, and the Contracting Officer’s decision shall represent a final decision.

C.1.5.2 The Contractor shall furnish to the Natural Resource Manager, a telephone number attended during normal business hours (7:00 a.m. – 3:30 p.m., CST) to which calls concerning performance or other contractual matters can be placed. For the purpose of time and date, a message will be deemed delivered to the Contractor, at such time as it is delivered to the number provided by the Contractor.

C.1.6. Quality Assurance

C.1.6.1 The government has the right to inspect and test all services called for by the contract, to the extent practicable at all times and places during the term of the contract.

The government shall perform inspections and tests in a manner that shall not unduly delay the work.

C.1.6.2 In the event that an area is missed, or is not mowed, trimmed, or has not had grass or debris removed as specified, the Contractor agrees to return and re-perform the unsatisfactory or missed services immediately upon receipt of notice from the Contracting Officer or his Authorized Representative.

C.1.6.3 If any of the services do not conform to contract requirements, the government may require the Contractor to perform the services again in conformity with contract requirements, at no increase in contract amount. When the defects in services cannot be corrected by re-performance, the government may (1) require the Contractor to take necessary action to ensure that future performance conforms to contract requirements and (2) reduce the contract price to reflect the reduced value of the services performed. Payment will not be made for work not performed or not performed to standard.

C.1.6.4 The Government reserves the right to cause the specified work to be performed by a third party or Government personnel and the cost incurred thereby will be levied against the Contractor. Any time Government personnel are used because of Contractor's nonperformance, the cost levied against the Contractor will include all direct costs associated with the performance of the specified work the direct cost to the Government for substitution of the Government personnel removed from their normal duties is computed on an hourly basis at the applicable wage rate.

C.1.7 ORDERING OF SERVICES

C.1.7.1 Individual orders for required services will be issued by either email, fax, or mail to the Contractor or his responsible individual, and followed by confirmation by phone from the Contracting Officer or the Contracting Officer’s Representative. Email/Fax/Mail orders will be considered issued at such time as it is delivered to the email/fax/mail address provided by the Contractor. The Contractor shall commence the ordered service(s) within 4 days notice after receipt of email/fax/mail order or date specified in the order (whichever is later), and complete the work in the time specified. The time allowed to complete the required services shall begin either as soon as the Contractor begins the mowing and trimming services, or at the end of the 4 days after receipt of the order, whichever occurs first.

C.1.7.2 In the event adverse weather or ground conditions occur after placement of an order for services that would create unsafe working conditions or result in damage to vegetation or turf, the Contractor shall cease operations and contact project personnel. Work affected by adverse conditions shall be stopped, restarted, or rescheduled at a mutually agreed upon time, to the extent possible. Payment will not be made for work not performed as a result of wet weather conditions unless an alternate date for services can be arranged, and services are performed.

C.1.7.3 The Government will order only complete mowings for each contract line item, to include but not limited to mowing and trimming of parks, roadways, trails and other designated areas.

AREAS TO BE SERVICED, ESTIMATED ACREAGE, MOWING QUANTITIES AND

TIME ALLOWED

Season 1: 1 APRIL 2017 – 31 MARCH 2018 Season 2: 1 APRIL 2018 – 31 MARCH 2019 Season 3: 1 APRIL 2019 – 31 MARCH 2020

TIME ALLOWED

NUMBER OF TO COMPLETE

AREA ACRES MOWINGS/SEASON REQUIRED SERVICE

Lucas Park 73.5 12 1.5 Days

Minooka Park 72 12 1.5 Days

Marshall Cove 17.5 6 .5 Day

NOTES:

1. The term “required service” as applied to time allowed, shall be deemed to include trimming around all inanimate objects.

2. Estimated Acres: The quantity of acres to be mowed and trimmed is considered to be an estimate on the high side. The area is a perimeter that does not subtract all the campsites, buildings, and non-vegetated area. It is the Contractor’s responsibility to satisfy himself that Government “estimated” acreages are acceptable prior to bidding.

3. Determination of acreages for roadway mowing is based on the mowing of approximately 15 feet on each side of roadways to be serviced. Trail or public access paths are required 10 feet wide.

4. The “estimated number of mowings” is what might be anticipated in a normal year. There is no guarantee that this number will be met. It is for illustrative purposes only. Example: One or multiple mowing may be removed in a drought year. The number of mowings will not be exceeded without a modification to the contract.

C.1.8 PERIOD OF PERFORMANCE

C.1.8.1. This Contract shall be effective on 1 April (or date of award, if later. Effective dates of full-year renewal options (if exercised) shall be from 1 April through 31 March of the following year.

C.1.8.2 Mowing and trimming services shall be as-ordered for the service period 1 April through 31 March the following year. Monday through Thursday, between the hours of 7:30 a.m. and 6 p.m. Work will not be permitted on Saturdays, Sundays, and holidays unless this restriction is specifically waived in writing by the Contracting Officer or his authorized representative.

C.1.8.3 The Government anticipates that a mowing order for all Public Use Areas will be placed prior to the following holidays: Memorial Day, Fourth of July, and Labor Day.

C.1.8.4. All work shall be accomplished within the specified period. Services rendered outside the time frames specified will not be compensated, unless the Contracting Officer or his authorized representative specifically waives this restriction in writing.

C.1.8.5 Vegetative growth rate under favorable climatic conditions at the Wilson Project is such that mowing and trimming may be required approximately every fourteen(14) days

C.1.9 Contractor Personnel

C.1.9.1 All Contractor personnel shall be fully clothed, at all times, while performing these services. Clothing shall be clean and neat in appearance.

C.1.9.2 Contractor personnel shall utilize tact, diplomacy and courtesy at all times during contact with the public.

C.1.10 Safety Requirements

C.1.10.1 Prior to beginning work on this contract the Contractor shall have an approved Accident Prevention Plan. This plan shall be in accordance with the most recent EM 385-1-1. The plan is intended to be a viable document and enhance the safety of Project staff and visitors. The Contractor will be expected to take a vital interest in safety, hazard, and educate their employees to work and plan their work safely. Proper driving techniques and defensive driving will be practiced to prevent vehicle accidents and property damage.

C.1.10.2 In order to provide safety controls for protection to the life and health of employees and other persons; for prevention of damage to property, materials, supplies and equipment; and for avoidance of work interruptions in the performance of this contract, the Contractor shall comply with all pertinent provisions of the Federal, State, and local regulations and shall take or cause to be taken such additional measures as the Contracting Officer may determine to be reasonable and necessary for the purpose.

C.1.10.3 Contractor vehicles shall be equipped with 4-way flashers and turn signals in operating condition. Flashers shall be activated when vehicles are parked on, or traveling slowly along roadways.

C.1.10.4 Any injury, property damage equipment malfunction or safety hazard observed by the Contractor shall be immediately reported to the Project personnel.

C.1.10.5 The contractor will comply with all safety requirements pertaining to ENG 385- 1-1 that can be found at http://140.194.76.129/publications/eng-manuals/em385-1- 1/2008_English/toc.html with special attention given to Section 18, Motor Vehicles, Machinery and Mechanized Equipment

C.1.10.6 The Contractor shall take such measures to protect the public and property from foreign materials thrown from rotary mowers and other rotating equipment while operating in public use areas and on public roadways.

C.1.11 Other Contractors The Government may undertake or award other contracts for additional work, and the Contractor shall fully cooperate with such other contractors and Government employees. All work must be carefully planned and fitted not to interfere with such other work. The Contractor shall not commit or permit any act that will interfere with the performance of work by other contractors or by Government employees.

C.1.11 LOST ARTICLES, VANDALISM, FACILITY MALFUNCTION: To assist the visiting public in reclaiming lost articles, all property left by visitors and found during contract operations shall be turned in to the Project Office. Any evidence of vandalism, instances of facilities not operating properly, or facilities in need of repair shall be reported immediately to Project personnel.

C.1.12 Coordination with the Project Office During mowing periods, the Government reserves the right to schedule meetings with the Contractor. The meetings shall be scheduled at the Project Office, as necessary, to ensure strict compliance with the terms of the contract, to coordinate work schedules in http://140.194.76.129/publications/eng-manuals/em385-1-1/2008_English/toc.html http://140.194.76.129/publications/eng-manuals/em385-1-1/2008_English/toc.html compliance with the Scope of Work, and to arrange a satisfactory operating agreement.

C.1.13 SECURITY:

C.1.13.1 The Contractor shall safeguard keys issued to them to perform the services required by this contract. All keys shall be returned to the government upon request and/or completion of the contract. Failure to return keys can result in withholding of payment.

C.1.13.2 The contractor is prohibited from making copies of keys.

C.1.13.3 The Contractor shall open and close gates within the contract boundary areas.

The Contractor shall securely lock any gate that is opened by him/her, upon completion of the required work, or upon completion of the workday.

C.2 Contractor Furnished Equipment and Supplies The Contractor shall furnish all equipment to accomplished the services specified in this PWS. All equipment must be approved by the Contracting Officer or the Contracting Officer's Representative prior to initial use. Equipment breakdown shall not relieve the Contractor of the responsibility of performing the work as specified. The Contractor shall assure that he has, or can obtain on short notice, sufficient backup equipment to continue the services as specified without interruption in the event of mechanical failure of his primary equipment.

C.3.1 Mowers shall be tractor mounted, multiple-spindle (lawn type) rotary, or flail;

equipped with adjustable side-mounted skids; capable of producing a smooth, even cut;

with a cutting height adjustable from 3 to 5 inches. Blades shall be sharpened and/or replaced often enough to assure smooth grass cut. If a batwing mower is used, each mower unit (or section shall have a minimum of two spindles. All mowers shall be constructed to distribute grass clippings evenly to prevent clumps or windrows. All mowers (large and small) shall be compatible with each other in mowing height and appearance of cut grass.

C.3.2 Trimming equipment shall consist of power hand mowers, "weed-eaters" or other type power trimmers, weed whips, and other equipment and tools as may be appropriate for the task.

C.4 Specific Tasks

C.4.1.1 All mowing and trimming shall be completed in an area prior to moving to another area.

C.4.1.2 Prospective bidders are encouraged to visit and fully inspect all areas, accesses, locations, terrain, etc. prior to bidding. The Government shall not be held accountable for conditions at the site, which were not taken into account by prospective bidders.

C.4.1.3 Mowing and trimming operations around buildings and roadsides shall be performed so grass clippings are thrown away from buildings and away from the road whenever possible. Right-of-way road mowing is measured from road shoulder outward to 10 feet on both sides of the road. In certain situations the slope, trees, or rocks may prevent the 10 foot width. Trail or public access paths are measured at 10 feet wide.

C.4.1.4 Extreme care shall be exercised when mowing and trimming around trees, bushes, shrubs, buildings, and other objects to insure that equipment does not come in contact with the object. All costs of repair or replacement in size, kind and type resulting from damage by the Contractor's equipment shall be borne by the Contractor. Repair or replacement shall occur within 24 hours of noticed damage. All damage will be reported to the Contracting Officer's Representative.

C.5.1 Mowing

C.5.2.1 Mowing operations shall not cause rutting or otherwise disturb existing turf.

Tractors shall be operated in such a manner as to protect against the sod being torn by the tractor wheels on turns. Mowing is not permitted when the ground is so wet that operations cause rutting or otherwise disturbs existing turf.

C.5.2.2 All mowers (large and small) shall be compatible with each other in mowing height and appearance of cut grass. After mowing, areas serviced under this contract shall present a neat, well-cared-for evenly mowed appearance, free from ruts or any unmowed strips or streaks. Tractors shall be operated in such a manner as to protect against the sod being torn by the tractor wheels on turns.

C.5.2.3 The Government will advise the contractor on the height of the cut, which will be between 3 and 5 inches. The Government reserves the right to designate the starting point (area or items to be mowed first) when ordering services under this contract.

C.5.2.4 Some of the mowing areas consist of rocky terrain and heavily wooded areas, and will require an extensive amount of trimming and hand mowing where larger mowers cannot maneuver satisfactorily.

C.5.2.5 The contractor will be required to pickup all shredded debris that is created by mowing over any trash.

C.5.2.6 The Contracting Officers Representative will provide the contractor with locations that equipment can be parked during a scheduled mowing. All equipment will be removed from public lands within 24 hours of a completion of a scheduled mowing.

C.5.3 Trimming:

C.5.3.1 Trimming is required in all areas. Grass and weeds shall be trimmed around trees, shrubs, buildings, fences, poles, posts, parking lots, curbs, parking lot bumper blocks (both sides), sidewalks, boulders, playgrounds, beaches, boat ramps, dam instrumentation and other fixed obstacles. The curbing at all boat ramps shall be trimmed to include five (5) feet down the riprap slope.

C.5.3.2 Trimming height shall match surrounding area grass heights. All areas shall be trimmed simultaneously, or immediately following mowing, and in all instances shall be completed no later than 48 consecutive hours after mowing.

C.5.3.3 Immediately following trimming, the Contractor shall remove grass clippings or debris deposited as a result of mowing and trimming operations from all sidewalks, entrances into buildings, and building interiors. If trimming is not completed in the same day as the mowing, the Contractor shall remove grass clippings or debris deposited as a result of mowing operations from all sidewalks, entrances into buildings, and building interiors. Grass clippings and debris shall not be left on sidewalks, etc. overnight, even if the trimming operations are not completed.

C.5.3.4 All camp pads, hydrant enclosures, sidewalks, trashcans and dumpster are sprayed for vegetation control. The Contractor shall trim all dead vegetation and any grass and/or weeds growing along, within or around these items.

C.5.3.5 Trimming shall include the removal of sprouts and heavily weeded growth.

C.5.3.6 Immediately following trimming, such objects shall be returned to their original positions, and sidewalks, entrances into buildings, and building interiors shall be swept as needed to remove clippings.

PREFORMANCE REQUIREMENTS SUMMARY

(PRS)

Section (Para)

Contract

Requirement

Performance Standard

Lot Description

Acceptab le Level of Performa nce

Mow turf area

Cut to a height between 3-5 inches. Mow not closer than

12 inches + 6 inches of the trunk of any tree or shrub.

Park

96% compliance (4%

Periodic Inspections by Government maximum defective allowed)

Public

Visitor Complaint

Prevent disturbing of turf area

Turf area will be kept free from ruts

(4%

Periodic Inspections by Government Public

Appearance of height of cut grass

Grass will be evenly mowed free from un-mowed strips of streaks.

(4% by Government Public

Trimming around trees, shrubs, buildings and other objects

Trim no closer than 2 inches + 1 inch from the trunk of trees or shrubs.

Buildings and inanimate objects will be trimmed to the last blade of grass.

(4% by Government

Public

Trimming height

Trimming height shall match surrounding area grass height.

(4% by Government Public

Removing grass clippings from sidewalks and building entrances.

Remove grass from sidewalks, and building entrances.

(4% by Government Public

Property damage prevention

Prevent contact with trees, shrubs, buildings or other objects.

(4% by Government Public

C.6 Applicable Publications and Forms

C.6.1 MAP: Information on Wilson Lake can be found on the Internet at http://www.nwk.usace.army.mil/wi/

C.6.2 Service Locations:

Maps Attached.

http://www.nwk.usace.army.mil/wi/

WD 15-5751 (Rev.-1) was first posted on www.wdol.gov on 01/31/2017

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5751

Daniel W. Simms Division of | Revision No.: 1

Director Wage Determinations| Date Of Revision: 01/25/2017

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.20 for calendar year 2017 applies to all contracts subject to the Service Contract

Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.20 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2017. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Kansas

Area: Kansas Counties of Barton, Cheyenne, Decatur, Ellis, Gove, Graham, Greeley, Lane, Logan, Ness, Norton, Osborne, Phillips, Rawlins, Rooks, Rush, Russell, Scott, Sheridan, Sherman, Smith, Thomas, Trego, Wallace, Wichita

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I 12.69

01012 - Accounting Clerk II 15.89

01013 - Accounting Clerk III 17.75

01020 - Administrative Assistant 19.09

01035 - Court Reporter 22.72

01041 - Customer Service Representative I 10.53

01042 - Customer Service Representative II 11.84

01043 - Customer Service Representative III 12.92

01051 - Data Entry Operator I 13.80

01052 - Data Entry Operator II 15.07

01060 - Dispatcher, Motor Vehicle 16.19

01070 - Document Preparation Clerk 14.47

01090 - Duplicating Machine Operator 14.47

01111 - General Clerk I 11.59

01112 - General Clerk II 12.65

01113 - General Clerk III 14.20

01120 - Housing Referral Assistant 16.15

01141 - Messenger Courier 12.43

01191 - Order Clerk I 12.48

01192 - Order Clerk II 13.62

01261 - Personnel Assistant (Employment) I 14.14

01262 - Personnel Assistant (Employment) II 15.81

01263 - Personnel Assistant (Employment) III 17.85

01270 - Production Control Clerk 20.84

01290 - Rental Clerk 13.83

01300 - Scheduler, Maintenance 12.55

01311 - Secretary I 12.55

01312 - Secretary II 14.04

01313 - Secretary III 16.15

01320 - Service Order Dispatcher 14.01

01410 - Supply Technician 19.09

01420 - Survey Worker 13.46

01460 - Switchboard Operator/Receptionist 12.06

01531 - Travel Clerk I 12.58

01532 - Travel Clerk II 13.25

01533 - Travel Clerk III 14.27

01611 - Word Processor I 11.87

01612 - Word Processor II 13.24

01613 - Word Processor III 14.74

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer, Fiberglass 21.18

05010 - Automotive Electrician 19.91

05040 - Automotive Glass Installer 19.06

05070 - Automotive Worker 19.06

05110 - Mobile Equipment Servicer 16.98

05130 - Motor Equipment Metal Mechanic 20.95

05160 - Motor Equipment Metal Worker 19.06

05190 - Motor Vehicle Mechanic 21.18

05220 - Motor Vehicle Mechanic Helper 15.92

05250 - Motor Vehicle Upholstery Worker 18.02

05280 - Motor Vehicle Wrecker 19.06

05310 - Painter, Automotive 19.91

05340 - Radiator Repair Specialist 19.06

05370 - Tire Repairer 15.62

05400 - Transmission Repair Specialist 20.95

07000 - Food Preparation And Service Occupations

07010 - Baker 12.88

07041 - Cook I 10.46

07042 - Cook II 11.75

07070 - Dishwasher 8.43

07130 - Food Service Worker 8.79

07210 - Meat Cutter 13.67

07260 - Waiter/Waitress 8.81

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter 19.62

09040 - Furniture Handler 13.76

09080 - Furniture Refinisher 19.62

09090 - Furniture Refinisher Helper 15.66

09110 - Furniture Repairer, Minor 17.54

09130 - Upholsterer 19.62

11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles 11.34

11060 - Elevator Operator 11.34

11090 - Gardener 12.57

11122 - Housekeeping Aide 10.62

11150 - Janitor 10.62

11210 - Laborer, Grounds Maintenance 10.78

11240 - Maid or Houseman 8.95

11260 - Pruner 9.85

11270 - Tractor Operator 12.52

11330 - Trail Maintenance Worker 10.78

11360 - Window Cleaner 11.57

12000 - Health Occupations

12010 - Ambulance Driver 16.19

12011 - Breath Alcohol Technician 15.92

12012 - Certified Occupational Therapist Assistant 21.84

12015 - Certified Physical Therapist Assistant 23.09

12020 - Dental Assistant 15.32

12025 - Dental Hygienist 29.85

12030 - EKG Technician 23.75

12035 - Electroneurodiagnostic Technologist 23.75

12040 - Emergency Medical Technician 16.19

12071 - Licensed Practical Nurse I 14.23

12072 - Licensed Practical Nurse II 15.92

12073 - Licensed Practical Nurse III 17.74

12100 - Medical Assistant 13.01

12130 - Medical Laboratory Technician 15.37

12160 - Medical Record Clerk 13.01

12190 - Medical Record Technician 14.89

12195 - Medical Transcriptionist 14.22

12210 - Nuclear Medicine Technologist 34.97

12221 - Nursing Assistant I 10.68

12222 - Nursing Assistant II 12.01

12223 - Nursing Assistant III 13.11

12224 - Nursing Assistant IV 14.71

12235 - Optical Dispenser 13.59

12236 - Optical Technician 14.23

12250 - Pharmacy Technician 14.75

12280 - Phlebotomist 13.37

12305 - Radiologic Technologist 22.98

12311 - Registered Nurse I 20.98

12312 - Registered Nurse II 25.67

12313 - Registered Nurse II, Specialist 25.67

12314 - Registered Nurse III 31.05

12315 - Registered Nurse III, Anesthetist 31.05

12316 - Registered Nurse IV 37.22

12317 - Scheduler (Drug and Alcohol Testing) 19.71

12320 - Substance Abuse Treatment Counselor 19.71

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I 17.44

13012 - Exhibits Specialist II 21.59

13013 - Exhibits Specialist III 26.42

13041 - Illustrator I 17.44

13042 - Illustrator II 21.59

13043 - Illustrator III 26.42

13047 - Librarian 23.91

13050 - Library Aide/Clerk 12.63

13054 - Library Information Technology Systems 19.64

Administrator

13058 - Library Technician 14.96

13061 - Media Specialist I 16.19

13062 - Media Specialist II 18.05

13063 - Media Specialist III 20.13

13071 - Photographer I 13.75

13072 - Photographer II 16.29

13073 - Photographer III 20.16

13074 - Photographer IV 24.59

13075 - Photographer V 29.83

13090 - Technical Order Library Clerk 15.74

13110 - Video Teleconference Technician 15.59

14000 - Information Technology Occupations

14041 - Computer Operator I 17.92

14042 - Computer Operator II 18.33

14043 - Computer Operator III 21.46

14044 - Computer Operator IV 23.01

14045 - Computer Operator V 25.46

14071 - Computer Programmer I (see 1) 22.75

14072 - Computer Programmer II (see 1) 25.78

14073 - Computer Programmer III (see 1)

14074 - Computer Programmer IV (see 1)

14101 - Computer Systems Analyst I (see 1)

14102 - Computer Systems Analyst II (see 1)

14103 - Computer Systems Analyst III (see 1)

14150 - Peripheral Equipment Operator 17.92

14160 - Personal Computer Support Technician 24.04

14170 - System Support Specialist 22.74

15000 - Instructional Occupations

15010 - Aircrew Training Devices Instructor (Non-Rated) 28.83

15020 - Aircrew Training Devices Instructor (Rated) 34.88

15030 - Air Crew Training Devices Instructor (Pilot) 40.05

15050 - Computer Based Training Specialist / Instructor 28.83

15060 - Educational Technologist 26.09

15070 - Flight Instructor (Pilot) 40.05

15080 - Graphic Artist 21.75

15085 - Maintenance Test Pilot, Fixed, Jet/Prop 40.05

15086 - Maintenance Test Pilot, Rotary Wing 40.05

15088 - Non-Maintenance Test/Co-Pilot 40.05

15090 - Technical Instructor 18.93

15095 - Technical Instructor/Course Developer 23.16

15110 - Test Proctor 15.28

15120 - Tutor 15.28

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations

16010 - Assembler 9.15

16030 - Counter Attendant 9.15

16040 - Dry Cleaner 11.60

16070 - Finisher, Flatwork, Machine 9.15

16090 - Presser, Hand 9.15

16110 - Presser, Machine, Drycleaning 9.15

16130 - Presser, Machine, Shirts 9.15

16160 - Presser, Machine, Wearing Apparel, Laundry 9.15

16190 - Sewing Machine Operator 12.36

16220 - Tailor 13.13

16250 - Washer, Machine 9.94

19000 - Machine Tool Operation And Repair Occupations

19010 - Machine-Tool Operator (Tool Room) 22.95

19040 - Tool And Die Maker 29.95

21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator 15.06

21030 - Material Coordinator 21.09

21040 - Material Expediter 21.09

21050 - Material Handling Laborer 12.33

21071 - Order Filler 12.00

21080 - Production Line Worker (Food Processing) 15.06

21110 - Shipping Packer 16.54

21130 - Shipping/Receiving Clerk 16.54

21140 - Store Worker I 14.77

21150 - Stock Clerk 18.92

21210 - Tools And Parts Attendant 15.06

21410 - Warehouse Specialist 15.06

23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder 25.92

23019 - Aircraft Logs and Records Technician 20.90

23021 - Aircraft Mechanic I 24.68

23022 - Aircraft Mechanic II 25.92

23023 - Aircraft Mechanic III 27.21

23040 - Aircraft Mechanic Helper 18.46

23050 - Aircraft, Painter 22.94

23060 - Aircraft Servicer 20.90

23070 - Aircraft Survival Flight Equipment Technician 22.94

23080 - Aircraft Worker 22.11

23091 - Aircrew Life Support Equipment (ALSE) Mechanic 22.11

I

23092 - Aircrew Life Support Equipment (ALSE) Mechanic 24.68

II

23110 - Appliance Mechanic 19.62

23120 - Bicycle Repairer 15.91

23125 - Cable Splicer 26.94

23130 - Carpenter, Maintenance 19.62

23140 - Carpet Layer 18.15

23160 - Electrician, Maintenance 21.21

23181 - Electronics Technician Maintenance I 24.31

23182 - Electronics Technician Maintenance II 25.52

23183 - Electronics Technician Maintenance III 30.71

23260 - Fabric Worker 17.67

23290 - Fire Alarm System Mechanic 19.95

23310 - Fire Extinguisher Repairer 16.71

23311 - Fuel Distribution System Mechanic 21.21

23312 - Fuel Distribution System Operator 17.45

23370 - General Maintenance Worker 18.69

23380 - Ground Support Equipment Mechanic 24.68

23381 - Ground Support Equipment Servicer 20.90

23382 - Ground Support Equipment Worker 22.11

23391 - Gunsmith I 16.71

23392 - Gunsmith II 18.69

23393 - Gunsmith III 20.58

23410 - Heating, Ventilation And Air-Conditioning 20.58

Mechanic

23411 - Heating, Ventilation And Air Contditioning 21.53

Mechanic (Research Facility)

23430 - Heavy Equipment Mechanic 20.67

23440 - Heavy Equipment Operator 20.58

23460 - Instrument Mechanic 21.96

23465 - Laboratory/Shelter Mechanic 19.62

23470 - Laborer 12.33

23510 - Locksmith 20.86

23530 - Machinery Maintenance Mechanic 21.70

23550 - Machinist, Maintenance 20.58

23580 - Maintenance Trades Helper 15.77

23591 - Metrology Technician I 21.96

23592 - Metrology Technician II 23.03

23593 - Metrology Technician III 24.00

23640 - Millwright 20.58

23710 - Office Appliance Repairer 19.00

23760 - Painter, Maintenance 18.96

23790 - Pipefitter, Maintenance 24.57

23810 - Plumber, Maintenance 23.34

23820 - Pneudraulic Systems Mechanic 20.58

23850 - Rigger 20.58

23870 - Scale Mechanic 18.69

23890 - Sheet-Metal Worker, Maintenance 21.95

23910 - Small Engine Mechanic 18.69

23931 - Telecommunications Mechanic I 25.59

23932 - Telecommunications Mechanic II 26.76

23950 - Telephone Lineman 23.77

23960 - Welder, Combination, Maintenance 19.95

23965 - Well Driller 20.58

23970 - Woodcraft Worker 20.58

23980 - Woodworker 16.71

24000 - Personal Needs Occupations

24550 - Case Manager 14.00

24570 - Child Care Attendant 10.20

24580 - Child Care Center Clerk 12.75

24610 - Chore Aide 10.01

24620 - Family Readiness And Support Services 14.00

Coordinator

24630 - Homemaker 16.25

25000 - Plant And System Operations Occupations

25010 - Boiler Tender 22.93

25040 - Sewage Plant Operator 23.96

25070 - Stationary Engineer 25.22

25190 - Ventilation Equipment Tender 16.68

25210 - Water Treatment Plant Operator 20.86

27000 - Protective Service Occupations

27004 - Alarm Monitor 16.74

27007 - Baggage Inspector 13.35

27008 - Corrections Officer 15.78

27010 - Court Security Officer 16.28

27030 - Detection Dog Handler 17.18

27040 - Detention Officer 15.78

27070 - Firefighter 17.61

27101 - Guard I 13.35

27102 - Guard II 17.18

27131 - Police Officer I 18.61

27132 - Police Officer II 20.68

28000 - Recreation Occupations

28041 - Carnival Equipment Operator 11.43

28042 - Carnival Equipment Repairer 12.08

28043 - Carnival Worker 9.29

28210 - Gate Attendant/Gate Tender 14.32

28310 - Lifeguard 10.82

28350 - Park Attendant (Aide) 16.01

28510 - Recreation Aide/Health Facility Attendant 11.69

28515 - Recreation Specialist 19.85

28630 - Sports Official 12.76

28690 - Swimming Pool Operator 17.39

29000 - Stevedoring/Longshoremen Occupational Services

29010 - Blocker And Bracer 18.69

29020 - Hatch Tender 18.69

29030 - Line Handler 18.69

29041 - Stevedore I 16.99

29042 - Stevedore II 19.62

30000 - Technical Occupations

30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 37.52

30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 25.90

30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 28.49

30021 - Archeological Technician I 17.30

30022 - Archeological Technician II 18.10

30023 - Archeological Technician III 22.43

30030 - Cartographic Technician 22.43

30040 - Civil Engineering Technician 19.66

30051 - Cryogenic Technician I 21.59

30052 - Cryogenic Technician II 23.85

30061 - Drafter/CAD Operator I 16.18

30062 - Drafter/CAD Operator II 18.10

30063 - Drafter/CAD Operator III 20.18

30064 - Drafter/CAD Operator IV 24.83

30081 - Engineering Technician I 16.25

30082 - Engineering Technician II 18.25

30083 - Engineering Technician III 22.54

30084 - Engineering Technician IV 24.66

30085 - Engineering Technician V 33.08

30086 - Engineering Technician VI 40.00

30090 - Environmental Technician 22.43

30095 - Evidence Control Specialist 19.49

30210 - Laboratory Technician 20.33

30221 - Latent Fingerprint Technician I 21.59

30222 - Latent Fingerprint Technician II 23.85

30240 - Mathematical Technician 23.48

30361 - Paralegal/Legal Assistant I 18.18

30362 - Paralegal/Legal Assistant II 23.48

30363 - Paralegal/Legal Assistant III 28.72

30364 - Paralegal/Legal Assistant IV 33.95

30375 - Petroleum Supply Specialist 23.85

30390 - Photo-Optics Technician 23.48

30395 - Radiation Control Technician 23.85

30461 - Technical Writer I 20.98

30462 - Technical Writer II 25.67

30463 - Technical Writer III 31.05

30491 - Unexploded Ordnance (UXO) Technician I 23.85

30492 - Unexploded Ordnance (UXO) Technician II 28.85

30493 - Unexploded Ordnance (UXO) Technician III 34.58

30494 - Unexploded (UXO) Safety Escort 23.85

30495 - Unexploded (UXO) Sweep Personnel 23.85

30501 - Weather Forecaster I 24.83

30502 - Weather Forecaster II 30.20

30620 - Weather Observer, Combined Upper Air Or (see 2) 20.18

Surface Programs

30621 - Weather Observer, Senior (see 2) 22.43

31000 - Transportation/Mobile Equipment Operation Occupations

31010 - Airplane Pilot 28.85

31020 - Bus Aide 11.94

31030 - Bus Driver 15.27

31043 - Driver Courier 13.09

31260 - Parking and Lot Attendant 10.11

31290 - Shuttle Bus Driver 13.87

31310 - Taxi Driver 10.43

31361 - Truckdriver, Light 13.87

31362 - Truckdriver, Medium 14.16

31363 - Truckdriver, Heavy 18.13

31364 - Truckdriver, Tractor-Trailer 18.13

99000 - Miscellaneous Occupations

99020 - Cabin Safety Specialist 14.07

99030 - Cashier 9.02

99050 - Desk Clerk 9.27

99095 - Embalmer 24.91

99130 - Flight Follower 23.85

99251 - Laboratory Animal Caretaker I 9.86

99252 - Laboratory Animal Caretaker II 10.44

99260 - Marketing Analyst 25.11

99310 - Mortician 24.91

99410 - Pest Controller 18.68

99510 - Photofinishing Worker 12.53

99710 - Recycling Laborer 15.37

99711 - Recycling Specialist 17.85

99730 - Refuse Collector 14.03

99810 - Sales Clerk 11.90

99820 - School Crossing Guard 11.36

99830 - Survey Party Chief 20.22

99831 - Surveying Aide 12.47

99832 - Surveying Technician 17.11

99840 - Vending Machine Attendant 14.64

99841 - Vending Machine Repairer 17.39

99842 - Vending Machine Repairer Helper 14.64

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal

Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 10 years, and 4 after 20 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin

Luther King Jr's Birthday, Washington's Birthday, Good Friday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and

Christmas Day. A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.)

(See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds

$27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime

(i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract

(either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the

"Service Contract Act Directory of Occupations", Fifth Edition (Revision 1), dated September 2015, unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE, Standard

Form 1444 (SF-1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR

4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees

(See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification, wage rate, and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract, a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order the proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the U.S.

Department of Labor, Wage and Hour Division, for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.

6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See

29 CFR 4.6(b)(2)(iii)).

Information required by the Regulations must be submitted on SF-1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of

Occupations" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1)).