W9128F24Q0011 - Solicitation Amendment 1_Jan 19 2024.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

To answ er the questions sent by interested contractors and update documentation based on the questions.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 27

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 19-Jan-2024

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W9128F24Q0011

X 9B. DATED (SEE ITEM 11)

14-Dec-2023

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

19-Jan-2024

CODE

U.S. ARMY CORPS OF ENGINEERS, OMAHA DIST

CONTRACTING OFFICE

1616 CAPITOL AVENUE

OMAHA NE 68102-4901

W9128F 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W9128F24Q0011

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

The following have been added by full text:

SCAWD 2015-4531 REV25 12.26.23

-4531"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4531 Daniel W. Simms Division of | Revision No.: 25 Director Wage Determinations| Date Of Last Revision: 12/26/2023

Note: Contracts subject to the Service Contract Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

|If the contract is entered into on or |Executive Order 14026 generally applies to | |after January 30, 2022, or the |the contract. | |contract is renewed or extended (e.g., |The contractor must pay all covered workers | |an option is exercised) on or after |at least $17.20 per hour (or the applicable | |January 30, 2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2024. | |If the contract was awarded on or |Executive Order 13658 generally applies to | |between January 1, 2015 and January 29,|the contract. | |2022, and the contract is not renewed |The contractor must pay all covered workers | |or extended on or after January 30, |at least $12.90 per hour (or the applicable | |2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2024. |

The applicable Executive Order minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the Executive Orders is available at www.dol.gov/whd/govcontracts.

State: Florida

Area: Florida County of Okaloosa

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 16.54***

01012 - Accounting Clerk II 18.58 01013 - Accounting Clerk III 20.78 01020 - Administrative Assistant 25.31 01035 - Court Reporter 19.88 01041 - Customer Service Representative I 14.15*** 01042 - Customer Service Representative II 15.44*** 01043 - Customer Service Representative III 17.33 01051 - Data Entry Operator I 16.14*** 01052 - Data Entry Operator II 17.61 01060 - Dispatcher, Motor Vehicle 17.62 01070 - Document Preparation Clerk 15.78*** 01090 - Duplicating Machine Operator 15.78*** 01111 - General Clerk I 14.29*** 01112 - General Clerk II 15.59*** 01113 - General Clerk III 17.51 01120 - Housing Referral Assistant 22.08 01141 - Messenger Courier 14.69*** 01191 - Order Clerk I 14.78*** 01192 - Order Clerk II 17.20 01261 - Personnel Assistant (Employment) I 18.19 01262 - Personnel Assistant (Employment) II 20.34 01263 - Personnel Assistant (Employment) III 22.67 01270 - Production Control Clerk 26.25 01290 - Rental Clerk 15.55*** 01300 - Scheduler, Maintenance 17.71 01311 - Secretary I 17.71 01312 - Secretary II 19.88 01313 - Secretary III 22.08 01320 - Service Order Dispatcher 15.75*** 01410 - Supply Technician 25.31 01420 - Survey Worker 17.49 01460 - Switchboard Operator/Receptionist 14.76*** 01531 - Travel Clerk I 15.85*** 01532 - Travel Clerk II 17.10*** 01533 - Travel Clerk III 18.24 01611 - Word Processor I 15.78*** 01612 - Word Processor II 17.71 01613 - Word Processor III 19.88 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 22.42 05010 - Automotive Electrician 21.34 05040 - Automotive Glass Installer 19.89 05070 - Automotive Worker 19.89 05110 - Mobile Equipment Servicer 17.06*** 05130 - Motor Equipment Metal Mechanic 22.76 05160 - Motor Equipment Metal Worker 19.89 05190 - Motor Vehicle Mechanic 22.76 05220 - Motor Vehicle Mechanic Helper 15.93*** 05250 - Motor Vehicle Upholstery Worker 18.42 05280 - Motor Vehicle Wrecker 19.89 05310 - Painter, Automotive 21.34 05340 - Radiator Repair Specialist 19.89 05370 - Tire Repairer 14.81*** 05400 - Transmission Repair Specialist 22.76 07000 - Food Preparation And Service Occupations 07010 - Baker 14.88*** 07041 - Cook I 14.40*** 07042 - Cook II 16.88*** 07070 - Dishwasher 12.73*** 07130 - Food Service Worker 14.26*** 07210 - Meat Cutter 18.29 07260 - Waiter/Waitress 12.09***

09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 22.35 09040 - Furniture Handler 13.23*** 09080 - Furniture Refinisher 22.35 09090 - Furniture Refinisher Helper 16.24*** 09110 - Furniture Repairer, Minor 19.29 09130 - Upholsterer 22.35 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 14.00*** 11060 - Elevator Operator 13.71*** 11090 - Gardener 20.63 11122 - Housekeeping Aide 13.71*** 11150 - Janitor 13.71*** 11210 - Laborer, Grounds Maintenance 15.30*** 11240 - Maid or Houseman 13.62*** 11260 - Pruner 13.43*** 11270 - Tractor Operator 18.86 11330 - Trail Maintenance Worker 15.30*** 11360 - Window Cleaner 15.62*** 12000 - Health Occupations 12010 - Ambulance Driver 18.86 12011 - Breath Alcohol Technician 20.45 12012 - Certified Occupational Therapist Assistant 28.06 12015 - Certified Physical Therapist Assistant 30.65 12020 - Dental Assistant 22.58 12025 - Dental Hygienist 37.60 12030 - EKG Technician 31.37 12035 - Electroneurodiagnostic Technologist 31.37 12040 - Emergency Medical Technician 18.86 12071 - Licensed Practical Nurse I 18.29 12072 - Licensed Practical Nurse II 20.45 12073 - Licensed Practical Nurse III 22.80 12100 - Medical Assistant 17.56 12130 - Medical Laboratory Technician 29.57 12160 - Medical Record Clerk 18.06 12190 - Medical Record Technician 20.20 12195 - Medical Transcriptionist 17.62 12210 - Nuclear Medicine Technologist 44.95 12221 - Nursing Assistant I 11.97*** 12222 - Nursing Assistant II 13.45*** 12223 - Nursing Assistant III 14.68*** 12224 - Nursing Assistant IV 16.49*** 12235 - Optical Dispenser 24.42 12236 - Optical Technician 18.29 12250 - Pharmacy Technician 17.79 12280 - Phlebotomist 17.45 12305 - Radiologic Technologist 24.42 12311 - Registered Nurse I 24.52 12312 - Registered Nurse II 30.00 12313 - Registered Nurse II, Specialist 30.00 12314 - Registered Nurse III 36.29 12315 - Registered Nurse III, Anesthetist 36.29 12316 - Registered Nurse IV 43.50 12317 - Scheduler (Drug and Alcohol Testing) 25.35 12320 - Substance Abuse Treatment Counselor 22.43 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 22.58 13012 - Exhibits Specialist II 27.98 13013 - Exhibits Specialist III 34.23 13041 - Illustrator I 22.72 13042 - Illustrator II 28.13 13043 - Illustrator III 34.42

13047 - Librarian 30.98 13050 - Library Aide/Clerk 14.44*** 13054 - Library Information Technology Systems 27.98 Administrator 13058 - Library Technician 19.10 13061 - Media Specialist I 20.18 13062 - Media Specialist II 22.58 13063 - Media Specialist III 25.17 13071 - Photographer I 17.91 13072 - Photographer II 21.19 13073 - Photographer III 25.81 13074 - Photographer IV 30.36 13075 - Photographer V 36.72 13090 - Technical Order Library Clerk 18.14 13110 - Video Teleconference Technician 20.86 14000 - Information Technology Occupations 14041 - Computer Operator I 17.34 14042 - Computer Operator II 19.39 14043 - Computer Operator III 21.64 14044 - Computer Operator IV 24.04 14045 - Computer Operator V 26.61 14071 - Computer Programmer I (see 1) 25.35 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 17.34 14160 - Personal Computer Support Technician 24.04 14170 - System Support Specialist 31.70 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 35.56 15020 - Aircrew Training Devices Instructor (Rated) 43.03 15030 - Air Crew Training Devices Instructor (Pilot) 51.58 15050 - Computer Based Training Specialist / Instructor 35.56 15060 - Educational Technologist 36.16 15070 - Flight Instructor (Pilot) 51.58 15080 - Graphic Artist 25.34 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 51.58 15086 - Maintenance Test Pilot, Rotary Wing 51.58 15088 - Non-Maintenance Test/Co-Pilot 51.58 15090 - Technical Instructor 27.97 15095 - Technical Instructor/Course Developer 34.22 15110 - Test Proctor 22.58 15120 - Tutor 22.58 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 12.03*** 16030 - Counter Attendant 12.03*** 16040 - Dry Cleaner 13.75*** 16070 - Finisher, Flatwork, Machine 12.03*** 16090 - Presser, Hand 12.03*** 16110 - Presser, Machine, Drycleaning 12.03*** 16130 - Presser, Machine, Shirts 12.03*** 16160 - Presser, Machine, Wearing Apparel, Laundry 12.03*** 16190 - Sewing Machine Operator 14.32*** 16220 - Tailor 14.89*** 16250 - Washer, Machine 12.61*** 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 23.46 19040 - Tool And Die Maker 28.97 21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator 17.42 21030 - Material Coordinator 26.25 21040 - Material Expediter 26.25 21050 - Material Handling Laborer 15.31*** 21071 - Order Filler 15.03*** 21080 - Production Line Worker (Food Processing) 17.42 21110 - Shipping Packer 17.65 21130 - Shipping/Receiving Clerk 17.65 21140 - Store Worker I 13.28*** 21150 - Stock Clerk 19.56 21210 - Tools And Parts Attendant 17.42 21410 - Warehouse Specialist 17.42 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 32.80 23019 - Aircraft Logs and Records Technician 25.23 23021 - Aircraft Mechanic I 31.17 23022 - Aircraft Mechanic II 32.80 23023 - Aircraft Mechanic III 34.45 23040 - Aircraft Mechanic Helper 21.25 23050 - Aircraft, Painter 29.23 23060 - Aircraft Servicer 25.23 23070 - Aircraft Survival Flight Equipment Technician 29.23 23080 - Aircraft Worker 27.24 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 27.24 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 31.17

II

23110 - Appliance Mechanic 23.46 23120 - Bicycle Repairer 18.66 23125 - Cable Splicer 29.19 23130 - Carpenter, Maintenance 20.11 23140 - Carpet Layer 21.87 23160 - Electrician, Maintenance 23.74 23181 - Electronics Technician Maintenance I 29.83 23182 - Electronics Technician Maintenance II 32.01 23183 - Electronics Technician Maintenance III 34.13 23260 - Fabric Worker 20.25 23290 - Fire Alarm System Mechanic 21.53 23310 - Fire Extinguisher Repairer 18.66 23311 - Fuel Distribution System Mechanic 25.02 23312 - Fuel Distribution System Operator 18.66 23370 - General Maintenance Worker 18.08 23380 - Ground Support Equipment Mechanic 31.17 23381 - Ground Support Equipment Servicer 25.23 23382 - Ground Support Equipment Worker 27.24 23391 - Gunsmith I 18.66 23392 - Gunsmith II 21.87 23393 - Gunsmith III 25.02 23410 - Heating, Ventilation And Air-Conditioning 22.66 Mechanic 23411 - Heating, Ventilation And Air Contidioning 23.85 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 28.90 23440 - Heavy Equipment Operator 20.60 23460 - Instrument Mechanic 25.02 23465 - Laboratory/Shelter Mechanic 23.46 23470 - Laborer 15.31*** 23510 - Locksmith 23.23 23530 - Machinery Maintenance Mechanic 30.46 23550 - Machinist, Maintenance 23.47 23580 - Maintenance Trades Helper 17.50 23591 - Metrology Technician I 25.02

23592 - Metrology Technician II 26.34 23593 - Metrology Technician III 27.65 23640 - Millwright 25.02 23710 - Office Appliance Repairer 20.00 23760 - Painter, Maintenance 18.69 23790 - Pipefitter, Maintenance 24.59 23810 - Plumber, Maintenance 23.06 23820 - Pneudraulic Systems Mechanic 25.02 23850 - Rigger 25.02 23870 - Scale Mechanic 21.87 23890 - Sheet-Metal Worker, Maintenance 27.42 23910 - Small Engine Mechanic 19.69 23931 - Telecommunications Mechanic I 26.69 23932 - Telecommunications Mechanic II 28.09 23950 - Telephone Lineman 23.42 23960 - Welder, Combination, Maintenance 22.53 23965 - Well Driller 25.02 23970 - Woodcraft Worker 25.02 23980 - Woodworker 18.66 24000 - Personal Needs Occupations 24550 - Case Manager 18.37 24570 - Child Care Attendant 12.32*** 24580 - Child Care Center Clerk 15.36*** 24610 - Chore Aide 12.82*** 24620 - Family Readiness And Support Services 18.37 Coordinator 24630 - Homemaker 18.37 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 23.84 25040 - Sewage Plant Operator 22.36 25070 - Stationary Engineer 23.84 25190 - Ventilation Equipment Tender 16.25*** 25210 - Water Treatment Plant Operator 22.36 27000 - Protective Service Occupations 27004 - Alarm Monitor 18.46 27007 - Baggage Inspector 15.40*** 27008 - Corrections Officer 18.63 27010 - Court Security Officer 19.30 27030 - Detection Dog Handler 17.22 27040 - Detention Officer 18.63 27070 - Firefighter 19.96 27101 - Guard I 15.40*** 27102 - Guard II 17.22 27131 - Police Officer I 20.76 27132 - Police Officer II 23.07 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 17.04*** 28042 - Carnival Equipment Repairer 18.59 28043 - Carnival Worker 12.35*** 28210 - Gate Attendant/Gate Tender 18.21 28310 - Lifeguard 15.18*** 28350 - Park Attendant (Aide) 20.37 28510 - Recreation Aide/Health Facility Attendant 14.87*** 28515 - Recreation Specialist 24.96 28630 - Sports Official 16.22*** 28690 - Swimming Pool Operator 22.00 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 21.87 29020 - Hatch Tender 21.87 29030 - Line Handler 21.87 29041 - Stevedore I 20.25 29042 - Stevedore II 23.46

30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 43.06 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 29.69 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 32.70 30021 - Archeological Technician I 18.63 30022 - Archeological Technician II 20.84 30023 - Archeological Technician III 25.82 30030 - Cartographic Technician 25.82 30040 - Civil Engineering Technician 23.70 30051 - Cryogenic Technician I 28.59 30052 - Cryogenic Technician II 31.58 30061 - Drafter/CAD Operator I 18.63 30062 - Drafter/CAD Operator II 20.84 30063 - Drafter/CAD Operator III 23.23 30064 - Drafter/CAD Operator IV 28.59 30081 - Engineering Technician I 16.84*** 30082 - Engineering Technician II 18.91 30083 - Engineering Technician III 21.15 30084 - Engineering Technician IV 26.21 30085 - Engineering Technician V 32.05 30086 - Engineering Technician VI 38.78 30090 - Environmental Technician 25.82 30095 - Evidence Control Specialist 25.82 30210 - Laboratory Technician 23.23 30221 - Latent Fingerprint Technician I 28.59 30222 - Latent Fingerprint Technician II 31.58 30240 - Mathematical Technician 25.82 30361 - Paralegal/Legal Assistant I 18.83 30362 - Paralegal/Legal Assistant II 23.32 30363 - Paralegal/Legal Assistant III 28.53 30364 - Paralegal/Legal Assistant IV 34.52 30375 - Petroleum Supply Specialist 31.58 30390 - Photo-Optics Technician 25.76 30395 - Radiation Control Technician 31.58 30461 - Technical Writer I 25.86 30462 - Technical Writer II 31.64 30463 - Technical Writer III 38.27 30491 - Unexploded Ordnance (UXO) Technician I 27.37 30492 - Unexploded Ordnance (UXO) Technician II 33.11 30493 - Unexploded Ordnance (UXO) Technician III 39.69 30494 - Unexploded (UXO) Safety Escort 27.37 30495 - Unexploded (UXO) Sweep Personnel 27.37 30501 - Weather Forecaster I 28.59 30502 - Weather Forecaster II 34.78 30620 - Weather Observer, Combined Upper Air Or (see 2) 23.23 Surface Programs 30621 - Weather Observer, Senior (see 2) 25.82 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 33.11 31020 - Bus Aide 13.81*** 31030 - Bus Driver 20.21 31043 - Driver Courier 17.02*** 31260 - Parking and Lot Attendant 12.06*** 31290 - Shuttle Bus Driver 16.36*** 31310 - Taxi Driver 13.65*** 31361 - Truckdriver, Light 18.62 31362 - Truckdriver, Medium 20.21 31363 - Truckdriver, Heavy 20.48 31364 - Truckdriver, Tractor-Trailer 20.48 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 16.14*** 99030 - Cashier 12.18***

99050 - Desk Clerk 13.27*** 99095 - Embalmer 27.37 99130 - Flight Follower 27.37 99251 - Laboratory Animal Caretaker I 16.62*** 99252 - Laboratory Animal Caretaker II 18.18 99260 - Marketing Analyst 27.36 99310 - Mortician 27.37 99410 - Pest Controller 18.20 99510 - Photofinishing Worker 14.38*** 99710 - Recycling Laborer 20.46 99711 - Recycling Specialist 25.14 99730 - Refuse Collector 18.04 99810 - Sales Clerk 13.98*** 99820 - School Crossing Guard 14.79*** 99830 - Survey Party Chief 23.19 99831 - Surveying Aide 12.60*** 99832 - Surveying Technician 21.09 99840 - Vending Machine Attendant 21.68 99841 - Vending Machine Repairer 27.80 99842 - Vending Machine Repairer Helper 21.68

***Workers in this classification may be entitled to a higher minimum wage under Executive Order 14026 ($17.20 per hour) or 13658 ($12.90 per hour). Please see the Note at the top of the wage determination for more information. Please also note that the minimum wage requirements of Executive Order 14026 and 13658 are not currently being enforced as to contracts or contract-like instruments entered into with the federal government in connection with seasonal recreational services or seasonal recreational equipment rental for the general public on federal lands. The minimum wage requirements of Executive Order 14026 also are not currently being enforced as to any contract or subcontract to which the states of Texas, Louisiana, or Mississippi, including their agencies, are a party.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.98 per hour, up to 40 hours per week, or $199.20 per week or $863.20 per month

HEALTH & WELFARE EO 13706: $4.57 per hour, up to 40 hours per week, or $182.80 per week, or $792.13 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 7 years, and 4 weeks after 11 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Juneteenth National Independence Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: This wage determination does not apply to any individual employed in a bona fide executive, administrative, or professional capacity, as defined in 29 C.F.R. Part 541. (See 41 C.F.R. 6701(3)). Because most Computer Systems Analysts and Computer Programmers who are paid at least $27.63 per hour (or at least $684 per week if paid on a salary or fee basis) likely qualify as exempt computer professionals under 29 U.S.C. 213(a)(1) and 29 U.S.C. 213(a)(17), this wage determination may not include wage rates for all occupations within those job families. In such instances, a conformance will be necessary if there are nonexempt employees in these job families working on the contract.

Job titles vary widely and change quickly in the computer industry, and are not determinative of whether an employee is an exempt computer professional. To be exempt, computer employees who satisfy the compensation requirements must also have a primary duty that consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

Any computer employee who meets the applicable compensation requirements and the above duties test qualifies as an exempt computer professional under both section 13(a)(1) and section 13(a)(17) of the Fair Labor Standards Act. (Field Assistance Bulletin No. 2006-3 (Dec. 14, 2006)). Accordingly, this wage determination will not apply to any exempt computer employee regardless of which of these two exemptions is utilized.

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of ""wash and wear"" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the ""Service Contract Act Directory of Occupations"", Fifth Edition (Revision 1), dated September 2015, unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE, Standard Form 1444 (SF-1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification, wage rate, and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract, a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order the proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the U.S.

Department of Labor, Wage and Hour Division, for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.

6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See 29 CFR 4.6(b)(2)(iii)).

Information required by the Regulations must be submitted on SF-1444 or bond paper.

When preparing a conformance request, the ""Service Contract Act Directory of Occupations"" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1))."

The following have been modified:

ATTACHMENT LIST

Attachment A – General Installation Security Requirements Attachment B – Fuel Storage Tank List_Revised per Jan. 2024 Amendment 1 Attachment C – Fuel Storage Tank Data Sheet Attachment D – Monthly Contractors Progress, Management and Status Report Attachment E – API Internal Inspection Telecon Briefing Template Attachment F – API Internal Inspection Report Template Attachment G – Return to Service Letter Attachment H – Not Applicable Attachment I – API External Inspection Template_Removed per Jan. 2024 Amendment 1 Attachment J – Not Applicable

PWS

SP-POL-CMP-INSPECT-PWS-PO13

Hurlburt AFB, FL

Part 1 General Information

1. GENERAL:

1.1. Scope: This is a non-personnel services contract to perform inspections on

Department of Defense fuel tanks. This service entails removal, disposal, transfer of remaining fuel, tank cleaning, replacing wiper seals, and providing an above-ground storage tank (AST) Inspection on tank(s) listed in Attachment B. The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn, is responsible to the Government.

1.2. Background: See attachment J for previous inspection report(s).

1.3. Objectives: The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to set floating pan legs to their maintenance level, execute the fuel removal, transfer or disposal of remaining fuel, clean the tank, wiper seal replacement, and perform an AST Internal inspection on the tank(s) as applicable at the location and tanks specified in attachment B as defined in this Performance Work Statement (PWS) except for those items specified as government furnished property and services. The contractor shall perform to the standards in this contract.

1.4. Period of Performance: The period of performance shall be for 240 calendar days starting at the date of contract award. Earlier completion of required services is encouraged and acceptable.

1.5. General Information

1.5.1. Quality Assurance: The government will evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan. This plan is primarily focused on what the Government must do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum acceptable defect rate(s).

1.5.2. Recognized Holidays:

New Year’s Day Martin Luther King Birthday President’s Day Memorial Day Juneteenth National Independence Day Independence Day Labor Day Columbus Day Veteran’s Day Thanksgiving Christmas

1.5.3. Hours of Operation: The contractor is responsible for conducting business, between the hours of 0730-1630 Monday through Friday, except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. Other than normal duty hours must be coordinated with the KO or his/her designated representative. The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall maintain stability and continuity of the workforce.

1.5.4. Place of Performance: The work to be performed under this contract will be performed at the installation and facilities identified in Attachment B.

1.5.5. Type of Contract: The government will award a Firm Fixed Price Contract

1.5.6. Security Requirements: Reference Attachment A – General Installation Security Requirements

1.5.7. Site Access: Contractor shall coordinate with Installation personnel for access to the site. Points of contact for the installation will be provided upon award.

1.5.8. Meetings/Kick-Off Meetings: The Contractor shall coordinate with USACE

PM and conduct a kickoff meeting prior to field activities. This can be accomplished either prior to mobilization and inspection activities or onsite prior to commencement of inspection activities. The Work Plan shall be discussed, and further coordination and scheduling accomplished at this meeting. These meetings shall be at no additional cost to the government.

1.5.8.1. The Contractor shall call the installation 72 hours prior to mobilization to verify tank fuel quantities are at the quoted/verified amount as stated in Attachment B as the contractor is not authorized to remove/transfer or dispose of more fuel than what is stated in the contract per Attachment B.

1.5.8.2. The Contractor shall be responsible to establish a report of findings and coordinate a teleconference after the inspection is complete and at least 24 hours prior to placing tank back into service. This teleconference will review deficiencies found during the inspection with the Government making the final decision on whether or not to place this tank back into service. The Contractor can use Attachment E - API INTERNAL INSPECTION TELECON BRIEFING TEMPLATE or their own format however this document shall include the next recommended inspection intervals for both External and Internal Inspection, and State regulated inspection intervals, if applicable. Also, when listing the findings, they shall be categorized as either “Mandatory”, “Recommended”. Coordinate with POC’s from Service Control Point (SCP), DLA, and USACE. Individuals to be identified after project award.

1.5.9. Contracting Officer Representative (COR): The (COR) will be identified by separate letter.

1.5.9.1. The COR is authorized to perform the following functions:

assure that the Contractor performs the technical requirements of the contract perform inspections necessary in connection with contract performance maintain written and oral communications with the Contractor concerning technical aspects of the contract issue written interpretations of technical requirements, including Government drawings, designs, specification monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies assist in coordinating availability of government furnished property

A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regards to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting order.

1.5.10. Key Personnel: Certified API 653 Inspector and Project Manager.

1.5.11. Organizational Conflict of Interest: Contractor and subcontractor personnel performing work under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent Organizational Conflict of Interests (OCI) as defined in FAR Subpart 9.5. The Contractor shall notify the Contracting Officer immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the Contracting Officer to avoid or mitigate any such OCI.

The Contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the Contracting Officer and in the event the Contracting Officer unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the Contracting Officer may effect other remedies as they deem necessary, including prohibiting the Contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.5.12. Suitability For Service: Evaluate inspection data to determine suitability for continued use. Identify conditions which pose a risk to integrity. Determine a metal loss threshold for mandatory repairs. In the determination of mandatory repairs:

Use a "first, do no harm" approach to classifying tank repairs.

Use Desired Service Interval as the time to next inspection unless notified otherwise by the Contracting Officer.

Use minimum remaining thickness (MRT) no less than 100 mils at the next inspection.

Do not classify as mandatory repair of conditions which are noncompliant with current standards but are un-related to structural or hydraulic integrity (e.g., gouge, improper weld spacing, weld profile).

Apply repair determination to individual indications. Do not average across an entire plate or course.

PART 2

DEFINITIONS & ACRONYMS

2. DEFINITIONS AND ACRONYMS:

2.1. DEFINITIONS:

2.1.1. CONTRACTOR. A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime.

2.1.2. CONTRACTING OFFICER. A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.

2.1.3. CONTRACTING OFFICER'S REPRESENTATIVE (COR). An employee of the U.S. Government appointed by the contracting officer to administer the contract. Such appointment shall be in writing and shall state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.

2.1.4. DEFECTIVE SERVICE. A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.1.5. DELIVERABLE. Anything that can be physically delivered but may include non-manufactured things such as meeting minutes or reports.

2.1.6. KEY PERSONNEL. Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.7. MANDATORY REPAIR. Action necessary to preserve or restore the structural and hydraulic integrity of the tank or piping, or to mitigate a safety hazard.

Includes any condition which has or may breach the hydraulic or structural integrity of the tank prior to the next integrity inspection.

2.1.8. PHYSICAL SECURITY. Actions that prevent the loss or damage of

Government property.

2.1.9. QUALITY ASSURANCE. The government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.10. QUALITY ASSURANCE SURVEILANCE PLAN (QASP). An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.11. QUALITY CONTROL. All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

2.1.12. RECOMMENDED REPAIR. Action intended to extend the service life of the tank or piping and to address conditions that currently, or within the next service interval, will not have an adverse effect on tank operability or integrity.

Applicability is limited to exclude soft or elastomeric parts for any pressure containing system. Categorize in either Long Term or Short Term repairs.

2.1.13. SUBCONTRACTOR. One that enters into a contract with a prime contractor.

The Government does not have privity of contract with the subcontractor.

2.1.14. TANK INSPECTION. A multi-disciplinary engineering assessment of al petroleum, oil, and lubricant storage tank systems within or connected to the tank hydraulic boundary. Systems include nozzles, appurtenances, and conveyance systems such as piping, stilling well, valve, flow control, cathodic protection, overfill protection, spill prevention, containment, leak detection, fire suppression, gauging, ventilation, lighting, and other electrical systems.

Inspection includes a review of cathodic protection reports and relevant as-built records when available. Unless stated otherwise, the limits are the boundary of secondary containment.

2.1.15. TANK INSPECTOR. An individual certified as a fuel storage tank inspector.

The recognized certification is API Std 653.

2.1.16. WORKDAY. The number of hours per day the Contractor provides services in accordance with the contract.

2.1.17. WORK WEEK. Monday through Friday, unless specified otherwise.

2.2. ACRONYMS:

ACOR Alternate Contracting Officer's Representative AFARS Army Federal Acquisition Regulation Supplement ANG Army National Guard AR Army Regulation AST Aboveground Storage Tank API American Petroleum Institute ATG Automatic Tank Gauging AWWA American Water Works Association

CCE Contracting Center of Excellence CCS Coating Condition Survey CFR Code of Federal Regulations CONUS Continental United States (excludes Alaska and Hawaii) COR Contracting Officer Representative COTR Contracting Officer's Technical Representative COTS Commercial-Off-the-Shelf DAF Department of the Air Force DD250 Department of Defense Form 250 (Receiving Report) DD254 Department of Defense Contract Security Requirement List DFARS Defense Federal Acquisition Regulation Supplement DMDC Defense Manpower Data Center DOD Department of Defense EPA Environmental Protection Agency FAR Federal Acquisition Regulation HIPAA Health Insurance Portability and Accountability Act of 1996 IAP International Airport KO Contracting Officer MOGAS Motor Gasoline NFPA National Fire Protection Association OCI Organizational Conflict of Interest OCONUS Outside Continental United States (includes Alaska and Hawaii) ODC Other Direct Costs PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QAP Quality Assurance Program QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program RTO Returned to Operator STI Steel Tank Institute SCP Service Control Point TE Technical Exhibit UFC Unified Facilities Criteria UFGS Unified Facilities Guide Specification

PART 3

GOVERNMENT FURNISHED PROPERTY, EQUIPMENT, AND

SERVICES

3. GOVERNMENT FURNISHED ITEMS AND SERVICES:

3.1. Services: No Government furnished items or services are required.

PART 4

CONTRACTOR FURNISHED ITEMS AND SERVICES

4. CONTRACTOR FURNISHED ITEMS AND RESPONSIBILITIES:

4.1. General: The Contractor shall furnish all supplies, equipment, facilities, and services required to perform work under this contract that are not listed under Section 3 of this PWS.

4.2. Equipment: The Contractor shall provide all tools and inspection equipment needed to perform the inspection and other services to be performed under the PWS.

4.2.1. Precision Equipment: Contractor is responsible to ensure all equipment to be used is certified and calibrated to the parameters and tolerances of the required equipment.

4.2.2. Gaskets: Composition ring, one piece factory cut, compliant with ASME

B16.21, Buna-N. Gaskets must be composed of either graphite or synthetic fibers in a nitrile binder and must be resistant to the effects of aviation hydrocarbon fuels and manufactured of fire-resistant materials. Use full-faced gaskets for flat-face flanged joints. Buna-N material must conform to SAE

AMS3275.

4.2.3. Flange Bolts, Nuts, and Washers: Bolts for manway covers must conform to

ASME B18.2.1. Bolts must be of sufficient length to obtain full bearing on the nuts and must project no more than three full threads beyond the nuts with the bolts tightened to the required torque. Bolts must be regular hexagonal bolts conforming to ASME B18.2.1 with material conforming to ASTM A193/A193M, Class 2, Grade B8. Bolts must be threaded in accordance with ASME B1.1, Class 2A fit, Coarse Thread Series, for sizes one inch and smaller and Eight-Pitch Thread Series for sizes larger than one inch. Use stainless steel washers dimensioned in accordance with ASTM F436 flat circular and fabricated from the same grade of stainless steel as the bolt.

4.2.4. Periphery Double Wiper Seal and Penetration Seals: Periphery seals must be flexible wiper squeegee and made of closed cell cast urethane.