W9128A-19-R-0016_Amendment_0001_file_1_of_4.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Install Relays at Castner, Menoher, and Wheeler Army Airf ield (WAAF) substations, Schofield Barracks, Oahu, Haw aii

See page 2 of 2.

1. CONTRACT ID CODE PAGE OF PAGES

1 2

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 04-Sep-2019

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W9128A19R0016

X 9B. DATED (SEE ITEM 11)

15-Aug-2019

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

04-Sep-2019

CODE

CECT - CONTRACTING DIVISION

USACE, HONOLULU DISTRICT

BLDG 252 (CECT-POH)

FT. SHAFTER HI 96858-5440

W9128A 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

20181207

*PM751-01-NB*

SEL-751 Relay Feeder Protection Relay

Instruction Manual

SEL-751 Relay Instruction Manual Date Code 20181207

© 2011–2018 by Schweitzer Engineering Laboratories, Inc. All rights reserved.

SEL products appearing in this document may be covered by U.S. and Foreign patents. Schweitzer Engineering Laboratories, Inc. reserves all rights and benefits afforded under federal and international copyright and patent laws in its products, including without limitation software, firmware, and documentation.

The information in this document is provided for informational use only and is subject to change without notice. Schweitzer Engineering Laboratories, Inc. has approved only the English language document.

This product is covered by the standard SEL 10-year warranty. For warranty details, visit selinc.com or contact your customer service representative. PM751-01

Date Code 20181207 Instruction Manual SEL-751 Relay

Table of Contents R.Instruction Manual

List of Tables ........................................................................................................................................................ v

List of Figures ...................................................................................................................................................xiii

Preface...............................................................................................................................................................xxiii Manual Overview ......................................................................................................................................... .xxiii Safety Information......................................................................................................................................... .xxv General Information ..................................................................................................................................... .xxix

Section 1: Introduction and Specifications Overview ......................................................................................................................................................... 1.1 Features............................................................................................................................................................ 1.1 Models, Options, and Accessories................................................................................................................... 1.5 Applications..................................................................................................................................................... 1.7 Getting Started................................................................................................................................................. 1.9 Specifications ................................................................................................................................................ 1.13

Section 2: Installation Overview ......................................................................................................................................................... 2.1 Relay Placement .............................................................................................................................................. 2.1 I/O Configuration ............................................................................................................................................ 2.2 Relay Connections......................................................................................................................................... 2.20 AC/DC Control Connection Diagrams.......................................................................................................... 2.27 Arc-Flash Protection...................................................................................................................................... 2.43 Field Serviceability........................................................................................................................................ 2.51

Section 3: PC Software Overview ......................................................................................................................................................... 3.1 Setup ................................................................................................................................................................ 3.2 Terminal........................................................................................................................................................... 3.3 Settings Database Management and Driver..................................................................................................... 3.4 Settings ............................................................................................................................................................ 3.6 Event Analysis............................................................................................................................................... 3.10 Meter and Control.......................................................................................................................................... 3.12 QuickSet Help ............................................................................................................................................... 3.17

Section 4: Protection and Logic Functions Overview ......................................................................................................................................................... 4.1 Application Data.............................................................................................................................................. 4.3 Group Settings (SET Command)..................................................................................................................... 4.3 Logic Settings (SET L Command) .............................................................................................................. 4.159 Global Settings (SET G Command) ............................................................................................................ 4.170 Port Settings (SET P Command)................................................................................................................. 4.189 Front-Panel Settings (SET F Command)..................................................................................................... 4.194 Report Settings (SET R Command) ............................................................................................................ 4.207 DNP Map Settings (Set DNP n Command, n = 1, 2, or 3) ............................................................................. 4.209 Modbus Map Settings (SET M Command)................................................................................................. 4.210 Touchscreen Settings ................................................................................................................................... 4.211 ii

Table of Contents

Section 5: Metering and Monitoring Overview ......................................................................................................................................................... 5.1 Power Measurement Conventions ................................................................................................................... 5.2 Metering .......................................................................................................................................................... 5.2 Load Profiling................................................................................................................................................ 5.14 Station DC Battery Monitor .......................................................................................................................... 5.15 Breaker Monitor ............................................................................................................................................ 5.18

Section 6: Settings Overview ......................................................................................................................................................... 6.1 View/Change Settings With the Two-Line Front Panel ................................................................................................6.2 View/Change Settings With the Touchscreen Front Panel.................................................................................................6.4 View/Change Settings Over Communications Port......................................................................................... 6.4 Setting Entry Error Messages.......................................................................................................................... 6.6

SEL-751 Settings Sheets

Section 7: Communications Overview ......................................................................................................................................................... 7.1 Communications Interfaces ............................................................................................................................. 7.1 Communications Protocols............................................................................................................................ 7.11 SEL ASCII Protocol and Commands ........................................................................................................... 7.17 Virtual File Interface...................................................................................................................................... 7.58

Section 8: Front-Panel Operations Overview ......................................................................................................................................................... 8.1 Two-Line Display Front Panel......................................................................................................................... 8.2 Touchscreen Display Front Panel .................................................................................................................. 8.18

Section 9: Bay Control Overview ......................................................................................................................................................... 9.1 Bay Control Application Example ................................................................................................................ 9.13

Section 10: Analyzing Events Overview ....................................................................................................................................................... 10.1 Event Reporting............................................................................................................................................. 10.2

Section 11: Testing and Troubleshooting Overview ....................................................................................................................................................... 11.1 Testing Tools.................................................................................................................................................. 11.1 Commissioning Tests..................................................................................................................................... 11.3 Periodic Tests (Routine Maintenance)......................................................................................................... 11.12 Self-Test....................................................................................................................................................... 11.13 Troubleshooting........................................................................................................................................... 11.16 Technical Support ........................................................................................................................................ 11.17

Appendix A: Firmware, ICD, and Manual Versions Firmware......................................................................................................................................................... A.1 ICD File ........................................................................................................................................................ A.10 Instruction Manual........................................................................................................................................ A.15

Appendix B: Firmware Upgrade Instructions Overview .........................................................................................................................................................B.1 Upgrade Firmware Using QuickSet ................................................................................................................B.2 Upgrade Firmware Using a Terminal Emulator ..............................................................................................B.6 Protocol Verification for Relays With IEC 61850 Option..................................................................................................B.8 Technical Support ............................................................................................................................................B.9 iii

Table of Contents

Appendix C: SEL Communications Processors SEL Communications Protocols......................................................................................................................C.1 SEL Communications Processor .....................................................................................................................C.3 SEL Communications Processor and Relay Architecture.....................................................................................C.5 SEL Communications Processor Example......................................................................................................C.7

Appendix D: DNP3 Communications Overview ........................................................................................................................................................ D.1 Introduction to DNP3 ..................................................................................................................................... D.1 DNP3 in the SEL-751..................................................................................................................................... D.6 DNP3 Documentation .................................................................................................................................. D.14

Appendix E: Modbus Communications Overview .........................................................................................................................................................E.1 Communications Protocol ...............................................................................................................................E.2 Modbus Register Map ...................................................................................................................................E.25

Appendix F: IEC 61850 Communications Features............................................................................................................................................................ F.1 IEC 61850 Introduction................................................................................................................................... F.2 IEC 61850 Operation....................................................................................................................................... F.3 Simulation Mode ........................................................................................................................................... F.15 IEC 61850 Configuration .............................................................................................................................. F.15 Logical Nodes................................................................................................................................................ F.16 Protocol Implementation Conformance Statement ....................................................................................... F.45 ACSI Conformance Statements..................................................................................................................... F.51 Potential Client and Automation Application Issues With Edition 2 Upgrades............................................ F.55

Appendix G: IEC 60870-5-103 Communications Overview ........................................................................................................................................................ G.1 Introduction to IEC 60870-5-103 ................................................................................................................... G.1 IEC 60870-5-103 in the SEL-751................................................................................................................... G.9 IEC 60870-5-103 Documentation ................................................................................................................ G.12

Appendix H: DeviceNet Communications Overview ........................................................................................................................................................ H.1 DeviceNet Card .............................................................................................................................................. H.1 Features........................................................................................................................................................... H.2 Electronic Data Sheet ..................................................................................................................................... H.3

Appendix I: Synchrophasors Overview .......................................................................................................................................................... I.1 Synchrophasor Measurement ........................................................................................................................... I.2 Settings for Synchrophasors ............................................................................................................................. I.4 Serial Port Settings for IEEE C37.118 Synchrophasors ...................................................................................... I.8 Ethernet Port Settings for IEEE C37.118 Synchrophasors .................................................................................... I.9 Synchrophasor Relay Word Bits..................................................................................................................... I.11 View Synchrophasors Using the MET PM Command................................................................................... I.13 IEEE C37.118 Synchrophasor Protocol ......................................................................................................... I.14

Appendix J: MIRRORED BITS Communications Overview ..........................................................................................................................................................J.1 Operation ..........................................................................................................................................................J.1 Settings .............................................................................................................................................................J.5 iv

Table of Contents

Appendix K: Relay Word Bits Overview ........................................................................................................................................................ K.1 Definitions ...................................................................................................................................................... K.6

Appendix L: Analog Quantities

Appendix M: Cybersecurity Features Access Control................................................................................................................................................M.1 Configuration Management............................................................................................................................M.3 Malware Protection ........................................................................................................................................M.3 Security Vulnerabilities ..................................................................................................................................M.3 Settings Erasure ..............................................................................................................................................M.3

Glossary

Index

SEL-751 Relay Command Summary

List of Tables R.Instruction Manual Table 1.1 Phase and Neutral Current Ratings Selection for the SEL-751 Models ................................ 1.1

Table 1.2 Current (ACI) and Voltage (AVI) Card Selection for SEL-751 Models ................................ 1.2 Table 1.3 SEL-751 Protection Elements ................................................................................................ 1.2 Table 1.4 SEL-751 Front-Panel Options ................................................................................................ 1.4 Table 1.5 SEL-751 Serial Port Settings................................................................................................ 1.10 Table 2.1 Power Supply Inputs (PSIO/2 DI/3 DO) Card Terminal Designations.................................. 2.4 Table 2.2 Communications Ports ........................................................................................................... 2.5 Table 2.3 Communications Card Interfaces and Connectors ................................................................. 2.6 Table 2.4 Current Inputs (4 ACI) Card Terminal Designations ............................................................. 2.7 Table 2.5 Current/Voltage Inputs (4 ACI/3 AVI) Card Terminal Designations ..................................... 2.8 Table 2.6 Voltage/Arc-Flash Detection Inputs (2 AVI/4 AFDI) Card Terminal Designations .............. 2.8 Table 2.7 Eight Arc-Flash Detection Inputs (8 AFDI) Card Terminal Designations............................. 2.9 Table 2.8 Eight Analog Inputs (8 AI) Card Terminal Designations ...................................................... 2.9 Table 2.9 Four Analog Inputs/Four Analog Outputs (4 AI/4 AO) Card Terminal Designations ......... 2.10 Table 2.10 I/O (3 DI/4 DO/1 AO) Card Terminal Designations ............................................................ 2.10 Table 2.11 RTD (10 RTD) Card Terminal Designations........................................................................ 2.11 Table 2.12 Four Digital Inputs/Three Digital Outputs (4 DI/3 DO) Card Terminal Designations ........ 2.11 Table 2.13 Four Digital Inputs/Four Digital Outputs (4 DI/4 DO) Card Terminal Designations .......... 2.12 Table 2.14 Eight Digital Inputs (8 DI) Card Terminal Designations ..................................................... 2.12 Table 2.15 Eight Digital Outputs (8 DO) Card Terminal Designations ................................................. 2.13 Table 2.16 Fourteen Digital Inputs (14 DI) Card Terminal Designations.............................................. 2.13 Table 2.17 Jumper Functions and Default Positions .............................................................................. 2.19 Table 2.18 Typical Maximum RTD Lead Length .................................................................................. 2.26 Table 2.19 Optical Budget Calculations................................................................................................. 2.49 Table 3.1 SEL Software Solutions ......................................................................................................... 3.1 Table 3.2 QuickSet Applications............................................................................................................ 3.1 Table 3.3 File/Tools Menus.................................................................................................................... 3.6 Table 3.4 QuickSet Help ...................................................................................................................... 3.17 Table 4.1 Identifier Settings ................................................................................................................... 4.3 Table 4.2 CT Configuration Settings ..................................................................................................... 4.4 Table 4.3 Voltage Configuration Settings .............................................................................................. 4.4 Table 4.4 Effect on Group Settings When SINGLEV := Y ................................................................... 4.5 Table 4.5 Main Relay Functions That Change With VNOM := OFF.................................................... 4.7 Table 4.6 Line Parameter Settings ....................................................................................................... 4.10 Table 4.7 Fault Locator Setting ............................................................................................................ 4.11 Table 4.8 Maximum Phase Overcurrent Settings................................................................................. 4.11 Table 4.9 Neutral Overcurrent Settings................................................................................................ 4.13 Table 4.10 Residual Overcurrent Settings.............................................................................................. 4.15 Table 4.11 Negative-Sequence Overcurrent Settings............................................................................. 4.15 Table 4.12 A-, B-, and C-Phase Time-Overcurrent Settings.................................................................. 4.17 Table 4.13 Maximum Phase Time-Overcurrent ..................................................................................... 4.18 Table 4.14 Negative-Sequence Time-Overcurrent Settings ................................................................... 4.19 Table 4.15 Neutral Time-Overcurrent Settings ...................................................................................... 4.20 Table 4.16 Residual Time-Overcurrent Settings .................................................................................... 4.21 Table 4.17 Equations Associated With U.S. Curves .............................................................................. 4.23 Table 4.18 Equations Associated With IEC Curves............................................................................... 4.23 Table 4.19 Available Ground Directional Elements............................................................................... 4.28 Table 4.20 Best Choice Ground Directional Element Logic.................................................................. 4.29 Table 4.21 Ground Directional Element Availability by Voltage Connection Settings ......................... 4.30 Table 4.22 Directional Control Settings................................................................................................. 4.53 Table 4.23 Wattmetric Settings .............................................................................................................. 4.54 Table 4.24 Directional Control Settings Not Made for Particular Conditions ....................................... 4.56 Table 4.25 Overcurrent Elements Controlled by Level Direction Settings DIR1 Through DIR4

(Corresponding Overcurrent Element Figure Numbers in Parentheses) .......................... 4.56 vi

List of Tables

Table 4.26 Effect of Settings VSCONN and DELTA_Y on Petersen Coil Directional Elements ......... 4.77 Table 4.27 Load-Encroachment Settings ............................................................................................... 4.79 Table 4.28 High-Impedance Fault (HIF) Detection Settings ................................................................. 4.85 Table 4.29 HIF Relay Word Bits ............................................................................................................ 4.86 Table 4.30 Second-Harmonic Blocking Settings ................................................................................... 4.88 Table 4.31 RTD Settings ........................................................................................................................ 4.90 Table 4.32 RTD Resistance Versus Temperature ................................................................................... 4.91 Table 4.33 IEC Thermal Element Settings............................................................................................. 4.97 Table 4.34 Undervoltage Function ......................................................................................................... 4.98 Table 4.35 Overvoltage Function ........................................................................................................... 4.99 Table 4.36 Operating Quantities for the 27I Element .......................................................................... 4.102 Table 4.37 Inverse-Time Undervoltage Settings .................................................................................. 4.103 Table 4.38 Specification Of Inverse-Time Undervoltage Protection Element ..................................... 4.103 Table 4.39 Operating Quantities for the 59I Element .......................................................................... 4.104 Table 4.40 Inverse-Time Overvoltage Settings .................................................................................... 4.105 Table 4.41 Specification of Inverse-Time Overvoltage Protection Element ........................................ 4.106 Table 4.42 Synchronism-Check Settings ............................................................................................. 4.109 Table 4.43 Voltages When Setting SINGLEV := Y............................................................................. 4.116 Table 4.44 Power Element Settings...................................................................................................... 4.116 Table 4.45 Power Factor Settings......................................................................................................... 4.118 Table 4.46 Loss-of-Potential (LOP) Setting......................................................................................... 4.120 Table 4.47 Vector Shift Element Settings ............................................................................................ 4.124 Table 4.48 Frequency Settings ............................................................................................................. 4.124 Table 4.49 Rate-of-Change-of-Frequency Settings.............................................................................. 4.125 Table 4.50 Time Window Versus 81RnTP Setting............................................................................... 4.126 Table 4.51 Fast Rate-of-Change-of-Frequency Settings ...................................................................... 4.128 Table 4.52 Trip/Close Logic Settings................................................................................................... 4.130 Table 4.53 Relay Word Bit and Front-Panel Correspondence to Reclosing Relay States ................... 4.140 Table 4.54 Reclosing Control Settings................................................................................................. 4.142 Table 4.55 Shot Counter Correspondence to Relay Word Bits and Open Interval Times ................... 4.145 Table 4.56 Open Interval Time Example Settings ............................................................................... 4.149 Table 4.57 Demand Meter Settings...................................................................................................... 4.155 Table 4.58 Enable Settings................................................................................................................... 4.159 Table 4.59 Latch Bits Equation Settings .............................................................................................. 4.160 Table 4.60 Math Variable Fractional Multiplication Results ............................................................... 4.162 Table 4.61 SELOGIC Control Equation Operators (Listed in Operator Precedence) ........................... 4.163 Table 4.62 Other SELOGIC Control Equation Operators/Values.......................................................... 4.166 Table 4.63 SELOGIC Variable Settings................................................................................................. 4.166 Table 4.64 Counter Input/Output Description...................................................................................... 4.167 Table 4.65 Order of Precedence of the Control Inputs......................................................................... 4.168 Table 4.66 Control Output Equations and Contact Behavior Settings................................................. 4.169 Table 4.67 General Global Settings ..................................................................................................... 4.170 Table 4.68 Event Messenger Settings .................................................................................................. 4.171 Table 4.69 Setting Group Selection ..................................................................................................... 4.172 Table 4.70 LEA Ratio and Phase Correction Settings for Phase Voltages........................................... 4.172 Table 4.71 LEA Ratio and Phase Correction Settings for Synchronism-Check Voltage..................... 4.173 Table 4.72 Time and Date Management Settings ................................................................................ 4.173 Table 4.73 Breaker Failure Setting....................................................................................................... 4.175 Table 4.74 Arc-Flash Overcurrent Settings.......................................................................................... 4.176 Table 4.75 Arc-Flash Time-Overlight Settings .................................................................................... 4.177 Table 4.76 Typical Ambient Illumination Light Levels ....................................................................... 4.180 Table 4.77 Summary of Steps .............................................................................................................. 4.182 Table 4.78 Analog Input Card Settings in Slot 3 ................................................................................. 4.184 Table 4.79 Analog Output Card Settings in Slot 3............................................................................... 4.185 Table 4.80 Slot C Input Debounce Settings ......................................................................................... 4.188 Table 4.81 Data Reset Settings............................................................................................................. 4.188 Table 4.82 Setting Change Disable Setting.......................................................................................... 4.188 Table 4.83 Time Synchronization Source Setting................................................................................ 4.189 vii

List of Tables

Table 4.84 Front-Panel Serial Port Settings ......................................................................................... 4.189 Table 4.85 Ethernet Port Settings......................................................................................................... 4.190 Table 4.86 Port Number Settings That Must be Unique ...................................................................... 4.191 Table 4.87 Fiber-Optic Serial Port Settings ......................................................................................... 4.192 Table 4.88 Rear-Panel Serial Port (EIA-232) Settings......................................................................... 4.192 Table 4.89 Rear-Panel Serial Port (EIA-232/EIA-485) Settings.......................................................... 4.193 Table 4.90 Rear-Panel DeviceNet Port Settings................................................................................... 4.194 Table 4.91 Display Point and Local Bit Default Settings .................................................................... 4.195 Table 4.92 LCD Settings ...................................................................................................................... 4.195 Table 4.93 Front-Panel Display Point Settings .................................................................................... 4.196 Table 4.94 Settings That Always, Never, or Conditionally Hide a Display Point ............................... 4.197 Table 4.95 Entries for the Four Strings ................................................................................................ 4.197 Table 4.96 Binary Entry in the Name String Only............................................................................... 4.199 Table 4.97 Analog Entry in the Name String Only.............................................................................. 4.200 Table 4.98 Entry in the Name String and the Alias Strings ................................................................. 4.200 Table 4.99 Example Settings and Displays .......................................................................................... 4.201 Table 4.100 Target LED Settings ........................................................................................................... 4.204 Table 4.101 Pushbutton LED Settings ................................................................................................... 4.205 Table 4.102 Auto-Removal Settings ...................................................................................................... 4.207 Table 4.103 SER Trigger Settings.......................................................................................................... 4.208 Table 4.104 Enable Alias Settings ......................................................................................................... 4.208 Table 4.105 SET R SER Alias Settings ................................................................................................. 4.208 Table 4.106 Event Report Settings......................................................................................................... 4.209 Table 4.107 HIF Event Report Settings ................................................................................................. 4.209 Table 4.108 Load Profile Settings .......................................................................................................... 4.209 Table 4.109 DNP Map Settings.............................................................................................................. 4.209 Table 4.110 User Map Register Settings ............................................................................................... 4.210 Table 5.1 Measured Fundamental Meter Values .................................................................................... 5.3 Table 5.2 Thermal Meter Values ............................................................................................................ 5.5 Table 5.3 RTD Input Status Messages ................................................................................................... 5.6 Table 5.4 Maximum/Minimum Meter Values ........................................................................................ 5.7 Table 5.5 RMS Meter Values ................................................................................................................. 5.9 Table 5.6 Demand Values..................................................................................................................... 5.11 Table 5.7 Synchrophasor Measured Values ......................................................................................... 5.12 Table 5.8 High-Impedance Fault Metering Measured Values.............................................................. 5.13 Table 5.9 Station DC Battery Monitor Settings ................................................................................... 5.15 Table 5.10 Breaker Maintenance Information for a 25 kV Circuit Breaker .......................................... 5.19 Table 5.11 Breaker Monitor Settings ..................................................................................................... 5.19 Table 6.1 Methods of Accessing Settings .............................................................................................. 6.1 Table 6.2 SHOW Command Options ..................................................................................................... 6.4 Table 6.3 SET Command Options ......................................................................................................... 6.4 Table 6.4 SET Command Editing Keystrokes........................................................................................ 6.5 Table 6.5 SET Command Format........................................................................................................... 6.6 Table SET.1 Range Dependencies for the EDIR Setting ....................................................................... SET.6 Table SET.2 Range Dependencies for the ORDER Setting ................................................................... SET.6 Table SET.3 Range Dependencies for 27I Operating Quantities ......................................................... SET.13 Table SET.4 Range Dependencies for 59I Operating Quantities ......................................................... SET.14 Table SET.5 Port Number Settings That Must be Unique ................................................................... SET.51 Table 7.1 SEL-751 Communications Port Interfaces............................................................................. 7.1 Table 7.2 PRP Settings........................................................................................................................... 7.6 Table 7.3 EIA-232/EIA-485 Serial Port Pin Functions ......................................................................... 7.9 Table 7.4 Protocols Supported on the Various Ports ............................................................................ 7.11 Table 7.5 Settings Associated With SNTP........................................................................................... 7.16 Table 7.6 Serial Port Automatic Messages .......................................................................................... 7.18 Table 7.7 Command Response Header Definitions ............................................................................. 7.20 Table 7.8 Access Commands ............................................................................................................... 7.21 Table 7.9 ANALOG Command ........................................................................................................... 7.23 Table 7.10 COM Command ................................................................................................................... 7.29 viii

List of Tables

Table 7.11 CONTROL Command ......................................................................................................... 7.29 Table 7.12 COPY Command.................................................................................................................. 7.30 Table 7.13 COUNTER Command ......................................................................................................... 7.30 Table 7.14 Date Command..................................................................................................................... 7.30 Table 7.15 EVENT Command (Event Reports)..................................................................................... 7.33 Table 7.16 FILE Command.................................................................................................................... 7.33 Table 7.17 GOOSE Command Variants................................................................................................. 7.33 Table 7.18 GOOSE IED Description ..................................................................................................... 7.34 Table 7.19 GROUP Command............................................................................................................... 7.36 Table 7.20 HELP Command .................................................................................................................. 7.37 Table 7.21 HISTORY Command ........................................................................................................... 7.37 Table 7.22 HIS HIF Command .............................................................................................................. 7.37 Table 7.23 HSG Command .................................................................................................................... 7.38 Table 7.24 IDENTIFICATION Command............................................................................................. 7.39 Table 7.25 INI HIF Command ............................................................................................................... 7.39 Table 7.26 IRI Command....................................................................................................................... 7.40 Table 7.27 LDP Commands ................................................................................................................... 7.40 Table 7.28 L_D Command (Load Firmware) ........................................................................................ 7.41 Table 7.29 LOG HIF Command............................................................................................................. 7.41 Table 7.30 LOO Command .................................................................................................................... 7.42 Table 7.31 Meter Command............................