09R6005_0006.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

CONSTRUCT COMMISSARY, FORT BLISS, TEXAS

SEE CONTINUATION PAGE:

1. CONTRACT ID CODE PAGE OF PAGES

J

FAR (48 CFR) 53.243

1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 26-Jan-2009

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W9127S-09-R-6002

X 9B. DATED (SEE ITEM 11)

11-Dec-2008

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

26-Jan-2009

CODE

CONTRACTING DIVISION

USACE, LITTLE ROCK (W9127S)

700 W. CAPITOL AVE, RM 7315

LITTLE ROCK AR 72201-3225

W9127S 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W9127S-09-R-6002

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

ADDENDUM 0006:

This Addendum 0006 modifies the drawings and project manual dated BID SET December 11, 2008 as noted herein and shall be considered part of the official contract documents for the New Commissary, Fort Bliss Texas, Solicitation No. W9127S-09-R-6002. Wherein provisions of this Addendum differ from the provisions of the original Specifications and Drawings, the provisions of this Addendum shall govern and take precedence.

Bidder shall acknowledge receipt of this addendum where indicated on the bid form. All parties are hereby notified that they are to make any adjustment in their proposals which they deem necessary on account of this Addendum, and it will be considered that the proposal is submitted with full knowledge of all modifications and changes specified herein. This Addendum shall become a component of the proposal documents.

Addendum No. 0006 will consist of 4 Pages with Modifications to Specifications and Documentation as indicated and 1 Attachment.

Attachments: The following attachment(s) are included with this document:

1. SA-12 Change Designated items

SECTION 00010 - SOLICITATION CONTRACT FORM

The required response date/time has changed from 28-Jan-2009 04:00 PM to 04-Feb-2009

04:00 PM.

REFER TO THE PROJECT MANUAL FOR THE FOLLOWING ITEMS:

Item 1: The following specification sections have been modified, added or deleted.

A. 11104 – MEAT DEPARTMENT EQUIPMENT

B. 11105 – PRODUCE DEPARTMENT EQUIPMENT

C. 11170 - BALER

Item 2: Make the following additions, corrections or deletions to the designated specification sections.

A. 11104 – MEAT DEPARTMENT EQUIPMENT

1. Replace line 2.3.2.a and 2.3.2.b with the following:

“a. Mettler-Toledo, Model WS150R (Wildcat) and stand model number 2022, with swivel casters is required for the Mettler-Toledo scale.”

2. Replace entire section 2.8 with the following:

2.8 ITEM 1M20-HV

2.8.1 Generalized Operating Specifications:

a. Dimensions:

1. 43 inches long / wide, 43 inches deep, 58 inches high. Dimensional sizes, such as length, width, and height are not critical to this equipment so long as this equipment is an upright floor model.

b. Construction:

1. Commercial off the shelf (COTS) standard unit, no unique DeCA requirements.

c. Operating Characteristics that shall be provided:

1. Expected life span of this equipment is required to be 6 years or more with basic maintenance.

2. Number 52 grinding head.

3. Ring removal tool.

4. Two stage mixing and grinding tandem units.

5. Automatic forward / reverse mixing action.

6. Heavy duty castors for mobility.

7. Minimum 300 pound hopper capacity.

8. Waterproof footswitch for on / off operations.

9. Minimum ground meat output 75 pounds per minute.

10. Minimum 12 Horsepower (HP) grinding motor.

11. Minimum 1.5 HP mixing motor.

12. Mixing arm, conveyor screw, conveyor screw drive shaft seal, mix-arm seal and cylinder removable for cleaning.

13. Stainless steel stand.

14. Grinder employs paddle motion to ensure hopper is emptied completely.

15. Side feed inlet and connector for tandem option.

16. All connectors for hooking two units up in a tandem arrangement.

17. 6 each knives / hold plates and 1 each meat stomper.

d. Networking / Communications that shall be provided:

2.8.2 Electrical Requirements:

a. 220 volts, 60 hertz, 3 phase with an average amperage draw of 36 amps.

b. Minimum 6 foot cord with a NEMA L21-50P plug, or a manufacturer’s equivalent to comply with equipment requirements.

2.8.3 Maintenance Requirements: Continued parts support for equipment is required for the projected total life cycle of the equipment plus 5 years.

2.8.4 Industry Standards and Contractor Requirements:

a. Industry Standards: Underwriters Laboratory (UL) listed and National Sanitation Foundation (NSF) certification, or equivalent.

b. Contractor Requirements:

1. Must be shipped ready to plug in and use.

2. Operational testing.

3. Start up assistance.

4. Provide familiarization training.

5. No additional work shall be required on the part of the government.

2.8.5 Special / Specific Equipment Safety Requirements:

a. Safety interlocked counter balanced lid.

2.8.6 Information To Be Provided By The Contractor To The Commissary At Time of Delivery:

a. Commercial Warranty and Point of Contact for Warranty Service.

b. Installation and Operating Instructions.

c. Parts List.

2.8.7 Federal Supply Class: 7320

2.8.8 Special Considerations For Installation/De-installation Of Equipment: (NOTICE/WARNING)

a. Contractor:

1. De-installation of existing mixer / grinder.

2. Old mixer / grinder to be left on the premises.

b. Store:

1. Electrical service for this equipment may require an upgrade to accommodate a larger amperage draw for the larger motor size.

2. A minimum 80 amp capacity circuit is recommended.

3. Equipment may be either configured with a plug or hard wired.

2.8.9 Recommended Source(s) or equal:

a. Hollymatic, Model 3000 Series Mixer / Grinders (tandem set)

B. 11105 – PRODUCE DEPARTMENT EQUIPMENT

1. Replace line 2.8.2.a and 2.8.2.b with the following:

“a. Mettler-Toledo, Model WS150R (Wildcat) and stand model number 2022, with swivel casters is required the Mettler-Toledo scale.

C. 11170 – BALER

1. Add the following to part 1.1:

“1.1.2 Purpose of section

a. The Baler is a GF/CI item. This section is provided for information purposes only as it relates to the relocation, reconnection and providing new circuiting for the existing Commissary Baler.”

Item 3: The following Drawing Sheets have been modified without additional issued drawings

A. A1.02

Item 4: Make the following additions, corrections or deletions to the designated drawing sheets

A. Sheet A1.02

1. Make the following changes to the “Commissary Equipment List”:

a. Refer attachment “SA-12”

END OF ADDENDUM 0006