W9127821R0048 AM03.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

1 3

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE 4. REQUISITION/PURCHASE 5. PROJECT NO. (If applicable)

W9127821R0048-0003 14 JUL 2021 MHF20006

6. ISSUED BY CODE 7. ADMINISTERED BY(If other than item 6)

CODE

Corps of Engineers 109 St. Joseph St.

Mobile, AL 36602

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP code) 9A. AMENDMENT OF SOLICITATION

NO.

W9127821R0048

9B. DATED (SEE ITEM 11)

10 JUN 2021

10A. MODIFICATION OF

CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE

FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods: (a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (if required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority)

THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO AUTHORITY OF FAR 43.103(b)

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible)

The subject solicitation for: CONSTRUCT MUNITIONS MAINTENANCE FACILITY AND IGLOOS, EGLIN AIR FORCE BASE, FLORIDA Is modified in the following: REFER TO THE ENCLOSED REVISED SPECIFICATIONS/DRAWING REVISIONS FOR AMENDMENT NO. 0003

Except as provided herein, all terms and conditions of the document reference in item 9A or 10A, as Heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICE (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

BY

(Signature of contracting officer)

16C. DATE SIGNED

NSN 7540-01-152-8070 30-105 STANDARD FORM 30 (REV. 10-83)

PREVIOUS EDITION UNUSABLE Prescribed by GSA

CONSTRUCT MUNITIONS MAINTENANCE FACILITY AND IGLOOS W9127821R0048

EGLIN AIR FORCE BASE, FLORIDA MHF20006

SF 30 Page 2

W9127821R0048-0003

PART I - REVISIONS MADE BY ADDED AND/OR REPLACEMENT PARAGRAPHS/PAGES/SECTIONS

The items listed below are to be replaced by the corresponding added and/or revised paragraphs/pages or sections. Added and/or revised paragraphs/pages or sections are indicated by a note in bottom right hand corner of each paragraph or page. Added sections are hereby made a part of the contract and are to be inserted in the specification in the proper numerical/alphabetical sequence.

Within the specifications, deletions from the specifications are indicated by strikethrough, e.g.: deletions are marked with strikethrough and additions to the specifications including revisions/substitutions are indicated in bold, italic and underlined, e.g.: additions are indicated thus.

Corresponding Added or Revised Paragraph SECTION Page, and/or Section

VOLUME 1

Table of Contents Revised as indicated herein.

01 00 00 Revised Paragraph 1.4

01 33 00 Added Submittal Register associated with Section 10 22 13

VOLUME 2

10 22 13 Added in its entirety.

VOLUME 3

26 35 43 Revised Paragraph 3.1.1.1

VOLUME 4

Appendix H Replaced in its entirety.

NOTE:

1. ONLY THE FOLLOWING ITEM CODE

SHEETS HAVE CHANGED:

A3 WALL MOUNT TV

WB1 OFFICE WHITEBOARDS

WS1 L SHAPE WORKSTATION

T1 WASTE RECEPTACLE

2. SHEET I-101 HAS CHANGED

SF 30 Page 3

W9127821R0048-0003

PART II - NOTE: Revised and replaced drawings are listed below. These revised and replaced drawings are to be inserted into the folio in the proper numerical sequence. Drawings that have been revised or replaced by this amendment shall be deleted from the folio. All drawings listed below are revised unless indicated otherwise.

SHT

REF. TITLE OF DRAWINGS

G-001 COVER SHEET

G-002 SHEET INDEX

C-004 GENERAL NOTES

A-103 REFLECTED CEILING PLAN

A-400 ENLARGED RESTROOM PLANS

A-401.1 RESTROOM DETAILS (REPLACED)

I-101 COMPOSITE FURNITURE PLAN AND FURNITURE SCHEDULE

Encl as stated:

Revised pages of the specifications as indicated in Part I.

7 Revised and replaced drawings as indicated in Part II.

This page was intentionally left blank for duplex printing.

Table of Contents Page 1

Amendment No. W9127821R0048-0003

TABLE OF CONTENTS

VOLUME 1 OF 4

CHECKLIST FOR PREPARATION OF OFFERS

BIDDING REQUIREMENTS

CONTRACT CLAUSES

STANDARD FORM 1442 - SOLICITATION, OFFER, AND AWARD

BIDDING SCHEDULE

EXPLANATION OF BID ITEMS

STANDARD FORM 24 - BID BOND

STANDARD FORM 28 - AFFIDAVIT OF INDIVIDUAL SURETY

STANDARD FORM LLL - DISCLOSURE OF LOBBYING ACTIVITIES

00 11 00 PROPOSAL SUBMISSION AND INSTRUCTIONS

00 12 00 SELECTION PROCEDURES AND BASIS OF AWARD

00 21 16 INSTRUCTIONS TO PROPOSERS

00 45 00 REPRESENTATIONS AND CERTIFICATIONS

00 70 00 CONDITIONS OF THE CONTRACT

SPECIFICATIONS

DIVISION 01 - GENERAL REQUIREMENTS

01 00 00 ADDITIONAL SPECIAL CONTRACT REQUIREMENTS

BASE ACCESS FORM

EP310-1-6a PROJECT SIGNS

DD FORM 1354

DD FORM 1354 CHECKLIST

WAGE RATES

01 00 01 GENERAL CONTRACT REQUIREMENTS

CESAM FORM 1151

01 32 01.00 10 PROJECT SCHEDULE

01 33 00 SUBMITTAL PROCEDURES

SUBMITTAL REGISTER

FORM 4025

01 33 29 SUSTAINABILITY REPORTING

01 35 26 GOVERNMENTAL SAFETY REQUIREMENTS

01 42 00 SOURCES FOR REFERENCE PUBLICATIONS

01 45 00.00 10 QUALITY CONTROL

01 45 00.15 10 RESIDENT MANAGEMENT SYSTEM CONTRACTOR MODE (RMS CM)

SAM FORM 696

01 45 35 SPECIAL INSPECTIONS

STATEMENT OF SPECIAL INSPECTIONS

SCHEDULE OF SPECIAL INSPECTIONS

01 57 19 TEMPORARY ENVIRONMENTAL CONTROLS – EGLIN STANDARD

01 74 19 CONSTRUCTION AND DEMOLITION WASTE MANAGEMENT

01 78 23 OPERATION AND MAINTENANCE DATA

01 91 00.15 10 TOTAL BUILDING COMMISSIONING

Table of Contents Page 2

DIVISION 02 – EXISTING CONDITIONS

02 41 00 DEMOLITION

DIVISION 03 – CONCRETE

03 30 00 CAST-IN-PLACE CONCRETE

03 45 00 PRECAST ARCHITECTURAL CONCRETE

DIVISION 04 – MASONRY

04 20 00 UNIT MASONRY

DIVISION 05 – METALS

05 05 23 WELDING, STRUCTURAL

05 12 00 STRUCTURAL STEEL

05 21 00 STEEL JOIST FRAMING

05 30 00 STEEL DECKS

05 40 00 COLD-FORMED METAL FRAMING

05 50 13 MISCELLANEOUS METAL FABRICATIONS

DIVISION 06 – WOOD, PLASTICS, AND COMPOSITES

06 10 00 ROUGH CARPENTRY

06 41 16 LAMINATE CLAD ARCHITECTURAL CASEWORK

06 61 16 SOLID POLYMER (SOLID SURFACING) FABRICATIONS

VOLUME 2 OF 4

DIVISION 07 – THERMAL AND MOISTURE PROTECTION

07 15 00 WALL AIR AND VAPOR BARRIERS

07 21 16 MINERAL FIBER BLANKET INSULATION

07 22 00 ROOF AND DECK INSULATION

07 27 00 BUILDING AIR BARRIER SYSTEM

07 41 13 METAL ROOF PANELS

07 60 00 FLASHING AND SHEET METAL

07 84 00 FIRESTOPPING

07 92 00 JOINT SEALANTS

DIVISION 08 – OPENINGS

08 11 13 STEEL DOORS AND FRAMES

08 33 23 OVERHEAD COILING DOORS

08 34 59 VAULT DOORS

08 34 73 SOUND CONTROL DOOR ASSEMBLIES

08 71 00 DOOR HARDWARE

08 91 00.00 36 METAL WALL LOUVERS

DIVISION 09 – FINISHES

09 06 00 SCHEDULES FOR FINISHES

09 22 00.00 36 SUPPORTS FOR PLASTER AND GYPSUM BOARD

Table of Contents Page 3

DIVISION 09 – FINISHES (CONTINUED)

09 29 00.00 36 GYPSUM BOARD

09 30 10 PORCELAIN AND GLASS TILING

09 51 00.00 36 ACOUSTICAL CEILINGS

09 65 00.00 36 RESILIENT FLOORING

09 90 00.00 36 PAINTS AND COATINGS

09 97 13.00 40 STEEL COATINGS

DIVISION 10 – SPECIALTIES

10 14 00.10 EXTERIOR SIGNAGE

10 14 00.20 36 INTERIOR SIGNAGE

10 21 13.00 36 TOILET COMPARTMENTS

10 22 13 WIRE MESH PARTITIONS

10 28 13 TOILET ACCESSORIES

DIVISION 21 – FIRE SUPPRESSION

21 13 13.00 10 WET PIPE SPRINKLER SYSTEM, FIRE PROTECTION

21 30 00 FIRE PUMPS

DIVISION 22 – PLUMBING

22 00 00 PLUMBING, GENERAL PURPOSE

DIVISION 23 – HEATING, VENTILATING, AND AIR CONDITIONING (HVAC)

23 00 00 AIR SUPPLY, DISTRIBUTION, VENTILATION, AND EXHAUST SYSTEMS

23 05 93 TESTING, ADJUSTING, AND BALANCING FOR HVAC

23 07 00 THERMAL INSULATION FOR MECHANICAL SYSTEMS

23 09 00 INSTRUMENTATION AND CONTROL FOR HVAC

23 09 13 INSTRUMENTATION AND CONTROL DEVICES FOR HVAC

23 09 23.02 BACNET DIRECT DIGITAL CONTROL FOR HVAC AND OTHER BUILDING

CONTROL SYSTEMS

23 23 00 REFRIGERANT PIPING

23 64 10 WATER CHILLERS, VAPOR COMPRESSION TYPE

23 64 26 CHILLED, WATER PIPING SYSTEMS

23 81 00 DECENTRALIZED UNITARY HVAC EQUIPMENT

23 82 46.00 40 ELECTRIC UNIT HEATERS

DIVISION 25 – INTEGRATED AUTOMATION

25 05 11.01 CYBERSECURITY FOR FACILITY-RELATED CONTROL SYSTEMS – FIRE

ALARM AND MASS NOTIFICATION SYSTEM

25 05 11.02 CYBERSECURITY FOR FACILITY-RELATED CONTROL SYSTEMS – UTILITY

MONITORING CONTROL SYSTEM

VOLUME 3 OF 4

DIVISION 26 – ELECTRICAL

26 12 19.10 THREE-PHASE, LIQUID-FILLED PAD-MOUNTED TRANSFORMERS

26 20 00 INTERIOR DISTRIBUTION SYSTEM

26 29 23 ADJUSTABLE SPEED DRIVE (ASD) SYSTEMS UNDER 600 VOLTS

Table of Contents Page 4

DIVISION 26 – ELECTRICAL (CONTINUED)

26 32 15.00 ENGINE-GENERATOR SET STATIONARY 15-2500 KW, WITH AUXILIARIES

26 35 43 400-HERTZ (HZ) SOLID STATE FREQUENCY CONVERTER

26 36 23 AUTOMATIC TRANSFER SWITCHES AND BY-PASS/ISOLATION SWITCH

26 41 00 LIGHTNING PROTECTION SYSTEM

26 42 14.00 10 CATHODIC PROTECTION SYSTEM (SACRIFICIAL ANODE)

26 51 00 INTERIOR LIGHTING

26 56 00 EXTERIOR LIGHTING

DIVISION 27 – COMMUNICATIONS

27 10 00 BUILDING TELECOMMUNICATIONS CABLING SYSTEM

DIVISION 28 – ELECTRONIC SAFETY AND SECURITY

28 31 76 INTERIOR FIRE ALARM AND MASS NOTIFICATION SYSTEM, ADDRESSABLE

DIVISION 31 - EARTHWORK

31 00 00 EARTHWORK

31 11 00 CLEARING AND GRUBBING

31 31 16.13 CHEMICAL TERMITE CONTROL

DIVISION 32 – EXTERIOR IMPROVEMENTS

32 01 16.71 COLD MILLING ASPHALT PAVING

32 01 19.61 SEALING OF JOINTS IN RIGID PAVEMENTS

32 05 33 LANDSCAPE ESTABLISHMENT

32 11 20 SUBBASES FOR FLEXIBLE PAVING

32 11 23 GRADED CRUSHED AGGREGATE BASE COURSES

32 12 13 BITUMINOUS TACK AND PRIME COATS

32 12 16 HOT-MIX ASPHALT (HMA) FOR ROADS AND PARKING

32 13 13.06 PORTLAND CEMENT CONCRETE PAVEMENT FOR ROADS AND SITE

FACILITIES

32 15 00 AGGREGATE SURFACING FOR CONSTRUCTION ACCESS ROAD

32 16 19 CONCRETE CURBS, GUTTERS AND SIDEWALKS

32 17 23 PAVEMENT MARKINGS

32 31 13.53 HIGH-SECURITY TEMPORARY AND PERMANENT CHAIN LINK FENCES AND

GATES

32 92 19 SEEDING

32 92 23 SODDING

DIVISION 33 – UTILITIES

33 11 00 WATER UTILITY DISTRIBUTION PIPING

33 71 02 UNDERGROUND ELECTRICAL DISTRIBUTION

33 82 00 TELECOMMUNICATIONS OUTSIDE PLANT (OSP)

DIVISION 41 – MATERIAL PROCESSING AND HANDLING EQUIPMENT

41 22 13.15 BRIDGE CRANES, OVERHEAD ELECTRIC, UNDER RUNNING

Table of Contents Page 5

VOLUME 4 OF 4

APPENDICES

APPENDIX A AIR FORCE FORM 813 REQUEST FOR ENVIRONMENTAL IMPACT

ANALYSIS – SIGNED 30 MAY 2017

APPENDIX B BORING LOCATION PLAN AND BORING LOGS

APPENDIX C AF_SUST_SCORESHEET_GP_vFEB2017

APPENDIX D 33 10 00 WATER PIPING STRUCTURES AND APPURTENANCES

(REV. 07242019)

APPENDIX E 33 30 00 SANITARY SEWER PIPING, STRUCTURES AND APPURTENANCES

(REV. 07202016)

APPENDIX F 33 32 17 SUBMERSIBLE UTILITY WASTEWATER PUMPING STATION

(REV. 11292015)

APPENDIX G EGLIN ARCHITECTURAL COMPATIBILITY PLAN

APPENDIX H FF&E, CID AND SID

--End of Project Table of Contents--

01 00 00 Revised by Amendment No. W9127821R0048-0003

01 00 00

1.4 CONSTRUCTION PROJECT MANAGER NOT USED

Construction Project Manager shall be onsite and dedicated to only this contract.

(Note: The remainder of the section is unchanged by this amendment.)

SUBMITTAL FORM,Jan 96 PREVIOUS EDITION IS OBSOLETE PAGE 1 OF 1 PAGES

MUNITIONS MAINTENANCE FACILITY AND IGLOOS, EGLIN AFB, FL

10 22 13 SD-02 Shop Drawings

1.4Wire Mesh Partitions

SD-03 Product Data

1.4Wire Mesh Partitions

2.1 SRecycled Content for Metal Post

and Framing Materials

2.1 SRecycled Content for Wire

Materials

SUBMITTAL REGISTER

CONTRACT NO.

TITLE AND LOCATION CONTRACTOR

CONTRACTOR:

SCHEDULE DATES

CONTRACTOR

ACTION

APPROVING AUTHORITY

A C T I V I T Y

N O

T R A N S M I T T A L

N O

S P E C

S E C T

DESCRIPTION

ITEM SUBMITTED

P A R A G R A P H

C L A S S I F I C A T I O N

G O V T

O R

A E

R E V W

R SUBMIT

APPROVAL

NEEDED

BY

MATERIAL

NEEDED

BY

A C T I O N

C O D E

DATE

OF

ACTION

DATE FWD

TO APPR

AUTH/

DATE RCD

FROM

CONTR

DATE FWD

TO OTHER

REVIEWER

DATE RCD

FROM OTH

REVIEWER

A C T I O N

C O D E

DATE

OF

ACTION

MAILED

TO

CONTR/

DATE RCD

FRM APPR

AUTH REMARKS

(a) (b) (c) (d) (e) (f) (g) (h) (i) (j) (k) (l) (m) (n) (o) (p) (q) (r)

ADDED BY AMENDMENT NO. W9127821R0048-0003

SECTION 10 22 13

WIRE MESH PARTITIONS

08/ 16, CHG 1: 08/ 18

PART 1 GENERAL

1.1 REFERENCES

The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.

AMERICAN IRON AND STEEL INSTITUTE (AISI)

AISI SG03-3 (2002; Suppl 2001-2004; R 2008) Cold-Formed Steel Design Manual Set

ASTM INTERNATIONAL (ASTM)

ASTM A36/A36M (2019) Standard Specification for Carbon Structural Steel

1.2 SUBMITTALS

Government approval is required for submittals with a "G" or "S" classification. Submittals not having a "G" or "S" classification are for Contractor Quality Control approval. Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:

SD-02 Shop Drawings

Wire Mesh Partitions

Show layout, details, materials, dimensions, finishes, and all information necessary for fabrication and installation.

SD-03 Product Data

Wire Mesh Partitions

Submit for each type of partition, door, and window.

Recycled Content for Metal Post and Framing Materials; S

Recycled Content for Wire Materials; S

1.3 DELIVERY, STORAGE, AND HANDLING

Deliver materials in manufacturer's original, unopened containers or packaging with labels intact and legible. Deliver, store, and handle materials so as to prevent damage. Replace damaged or defective materials with new.

1.4 DESCRIPTION OF WORK

Wire mesh partitions must be all wire type , normal duty for normal industrial use ]. Provide partitions complete with fasteners, capping

SECTION 10 22 13 Page 1

ENTIRE SECTION ADDED BY AMENDMENT NO. 0003

bars, adjustable floor sockets, bracing, doors, hardware, and other items necessary for a complete, useable, and rigid installation.

PART 2 PRODUCTS

2.1 MATERIALS

Metal post and framing materials listed below must contain a minimum of 15 percent post-consumer recycled content and wire materials must contain a minimum of 50 percent post-industrial recycled content. Provide data identifying percentage of recycled content for metal post and framing materials. Also provide data identifying percentage of recycled content for wire materials.

2.1.1 Steel Shapes, Plates, and Bars

ASTM A36/A36M.

2.1.2 Cold-Formed Steel

AISI SG03-3 .

2.1.3 Wire Mesh

Carbon steel wire, woven diamond mesh, intermediate crimped.

2.1.4 Floor Sockets

Cast or forged steel or ductile iron, adjustable, approximately 2-1/2 inches high.

2.2 NORMAL DUTY PARTITIONS

2.2.1 Wire Mesh

10 gage wire, 1-1/2 inch mesh.

2.2.2 Vertical Frames

1-1/4 by 5/8 inch cold-rolled C section channels or 1-1/4 by 5/8 by 1/8 inch channels. Provide only C channels where frames are installed toe to toe without posts.

2.2.3 Horizontal Frames

1 by 5/8 inch channels.

2.2.4 Center Reinforcing Bar

One 1 by 1/2 by 1/8 inch channel with all wires woven through, or two 1 by 3/8 by 1/8 inch channels bolted together with mesh in between.

2.2.5 Capping Bar

2-1/4 by one by 1/8 inch channel or 2 by 1/4 inch flat bar.

2.2.6 Corner Posts

Structural steel angles, 1-1/4 by 1-1/4 by 1/8 inch.

SECTION 10 22 13 Page 2

2.2.7 Line Posts

Unless otherwise indicated, provide partitions more than 12 feet high with flat bar line posts bolted between vertical frame channels. Sizes of posts must be as follows:

Partition Height Size of Posts

12 feet to 14 feet 8 inches 1-3/4 by 5/16 inch or 2 by 1/4 inch

2.2.8 Hinged Doors

Frames must be 1-1/4 by 1/2 by 1/8 inch channels with 1-1/4 by 1/8 inch flat bar cover on top and bottom rails and on hinge stile and a 1-3/8 by 3/4 by 1/8 inch angle riveted to the lock stile. Provide 1 1/2 pairs of regular weight, wrought steel, non-removable pin, butt hinges riveted or welded to the door and the door opening frame for each door.

2.2.9 Sheet Metal Base

Hot- or cold-rolled sheet steel, not lighter than 16 gage. 2.3 DOOR

OPENING FRAMES

Provide frames the same size and shape as the vertical frames for the mesh panels.

2.4 LOCKS

Provide each door with a mortise type lock with a six-pin tumbler lock cylinder on the outside and a recessed knob on the inside.

2.5 FABRICATION

2.5.1 Standard Panels

Wire must be woven into diamond mesh, intermediate crimped, and securely clinched to frames. Joints must be mortised and tenoned. Wire must be continuous at center reinforcing bars, either woven through a single channel or bolted between two channels. Panel vertical frames must have 1/4 inch bolt holes 12 inches o.c. for normal duty partitions.

2.5.2 Sheet Metal Base Panels

Upper portion must be as specified for standard panels, except that the wire must be clinched into the center reinforcing bar. Form sheet steel to fit between the panel frames and securely bolt to the frames.

2.5.3 Doors

Construction must be similar to that specified for panels. Wire mesh must be the same as that used in the adjacent partition panels.

SECTION 10 22 13 Page 3

2.5.4 Finish

Thoroughly clean ferrous metal, treat with phosphate, and paint with gray enamel in the shop.

PART 3 EXECUTION

3.1 INSTALLATION

3.1.1 Wire Mesh Partitions

Install plumb, level, and true to line, within a tolerance of 1/8 inch in 10 feet or the height or run of the partition, if less than 10 feet.

Anchor floor sockets to the floor with expansion bolts. Bolt vertical frames and posts together with 1/4 inch bolts 12 inches o.c. for normal duty partitions. Secure top frames to a continuous capping bar with 1/4 inch diameter U bolts not more than 28 inches o.c.

3.1.2 Doors

Install in accordance with the manufacturers' recommendations. Adjust as required so that doors and hardware operate freely and properly.

3.1.3 Touch-Up

Clean and paint scratches, abrasions, and other damage to shop painted surfaces to match the shop-applied finish.

Repair minor surface rust areas. Clean and prime with rust inhibitive primer paint. Apply final paint to match shop-applied finishes.

-- End of Section --

SECTION 10 22 13 Page 4

26 35 43 Revised by Amendment No. W9127821R0048-0003

26 35 43

3.1.1.1 Floor Mounted

Units installed in Hazardous Locations (Class I Division II) shall be elevated over 18" above the finished floor. Provide a rack from the same unit manufacturer which is designed specifically for this unit and purpose. Provide proper floor mounting of the rack, mounting of the unit to the rack, and install in accordance with the manufacturer's drawings and instructions and as indicated. Align, level, and bolt units and racks to allow for proper operation and maintenance of equipment.

(Note: The remainder of the section is unchanged by this amendment.)

APPENDIX H

FF&E/CID/SID

REPLACED IN ITS ENTIRETY BY AMENDMENT NO. W9127821R0048-0003

MUNITIONS MAINTENANCE FACILITY & IGLOOS

EGLIN AFB

FF&E/CID/SID

LINDA CASHMAN, IIDA

INTERIOR DESIGNER

US ARMY CORPS OF ENGINEERS MOBILE DISTRICT

ITEM CODE:

TOTAL QUANTITY:

MANUFACTURER:

DESCRIPTION:

MODEL NO.:

DIMENSIONS:

ROOM NO. LOCATION:

CATALOG SHEET:

TB3 TRAINING TABLE

Versteel (basis of design)

Tables w/one power and data unit each flush with table tops, Power and Comm unit to have 2 electrical outlets and 2 Cat 6 communicaton jacks. Modesty panel, raceway and wire management on each table.Top surface to be laminate with formed edge. Minimum 9 foot cord. Tables next, have folding top, and gang.

TIM

60”Wx24”Dx29”H

ATTACHED

TIM

Tables in Motion

It’s cool to work with TIM.

Versteel | TIM

It’s cool to work with TIM.

Versteel | TIM versteel.com Made in America 800 876 2120

For all specification data visit Versteel online.

TM0619

Mobile and flexible. TIM is a height adjustable training table that also tilts, nests and folds.

Add power and data solutions with wire management while maintaining TIM’s kinetic features.

Choose casters or glides. Panel or Sail modesty. Rectangle or Arc Rectangle top.

Designed exclusively for Versteel by David R. Gutgsell.

ITEM:

QUANTITY:

MANUFACTURER:

MODEL:

DIMENSONS:

DESCRIPTION:

FINISHES:

ROOM NO.LOCATION:

CATALOG SHEET:

CH4 TRAINING TABLE CHAIRS

VERSTEEL (basis of design)

SIMON

22”Wx31 ¾”Hx18”D (SEAT HEIGHT 17 ¾”)

Flex Motion design, nests and stacks tightly, w/casters, armless

Alloy Frame: CH CHAMPAGNE

Seat and Back: NEAR BLACK POLY

SIMON™

SIMON.™ SeatINg IN MOtION.

Simon chairs incorporate Versteel’s Flex Motion design, which moves with the human body to deliver proven comfort and support in any position. Simon chairs complement Versteel’s tables, creating visual unity in training and working environments. And Simon can be nested and stacked for easy storage.

TAbleT ArM

Additional surface space available for a variety of working needs.

MObIlITY

Available with casters to make rearranging quick and easy.

NeSTING

Tightly nests for easy and convenient storage.

If you’re looking for new ideas and inspiration, you’ve come to the right place:

VERSTEEL.COM

SIMON™

Flex MOtION Simon allows for the flexibility that is needed for multitasking applications. FeatureS easily stacks and tightly nests to reconfigure any room. FINISheS & MaterIalS Choose from multiple poly shell, wood or upholstery finish options to give you the look you desire. OptIONS Available with or without arms as well as tablet arm. Casters and glides are also available. Stool height available in 24" and 29".

www.versteel.com p: 800.876.2120 F: 812.482.9318 2332 Cathy lane Jasper, Indiana 47546 SM 13 • PrINTeD IN USA • ©2013 Versteel

MANUFACTURER:

DESCRIPTION:

MODEL:

TB1 CONFERENCE TABLE

KNOLL (basis of design)

Modular design with wire and data management, rectangular with rounded ends

FINISHES:

DIMENSIONS:

ROOM NO. LOCATION:

PROPELLER

Walnut Laminate

96”x40”x29”H

CATALOG SHEET ATTACHED

S o p h is ti c a te d

T a b le s fo r

C o n fe re n c in g

M e e ti n g a n d T ra in in g

In t o d a y ’s m o d e rn o ffi c e fl e x ib il it y i s k e y S p a c e s m u s t s u p p o rt a v a ri e ty o f c o ll a b o ra ti v e a n d i n d iv id u a l w o rk a ll w h il e s ta y in g c o n n e c te d t o t e c h n o lo g y

P ro p e ll e r® o ff e rs a m u lt i-p u rp o s e p o rt fo li o o f tr a in in g n d c o n fe re n c e t a b le s f o r th e e v o lv in g o ffi c e l a n d s c a p e

C h a ra c te ri z e d b y i n te ll ig e n t d e s ig n a s o p h is ti c a te d e s th e ti c a n d e a s e o f re c o n fi g u ra ti o n P ro p e ll e r is t lu ti o n t o t h e m u lt i-ta s k in g w o rk p la c e

E m an ue la F ra tt in i M ag nu ss o n is a M ila n-b o rn a rc hi te ct nd es ig ne r b as ed in

N ew

Y o rk . H er w o rk s p an s ar ch ite ct ur e, ri o rs

, a nd p ro d uc t d es ig n.

4F is h e s a

O p ti o n s

S to ra g e o p ti o n s

E d g e o p ti o n s

T a b le o p ti o n s

R e c ta n g u la r T ra in in g T a b le C

-L e g

F lip

-T o p T a b le T-

L e g

F lip

-T o p T a b le

C o n fe re n c e T a b le

D ru m B a s e

C o n fe re n c e T a b le

P e a n u t

B a s e

C o n fe re n c e T a b le

S q u a re

D ru m B a

C re d e n z a

S id e b o a rd

C o n fe re n c e T a b le

S ta n d a rd

L lu m n L e g

T a b le

F la t E d g e b a n d

M o ld e d

E d g e b a n d

A u to

S tr a d a E d g e P ro fil e S a a ri n e n E d g e P ro fil e P ro p e lle r E d g e P ro fil e

C o n fe re n c e T a b le

R e c ta n g u la r B a

K no llS tu di o

5Propeller

W o o d g ra

L m in

T p

L ig h t

A s h

Z e b ra

W a rm

A s h

M e d iu m

C h e rr y

W h it e n e d

A s h

N a tu ra l M a p le

G re y A s h

N a tu ra l C h e rr y

C la s s ic

O a k

W a ln u t

G ra p h it e P e a r

S o li m in a te

T o p

B ri g h t

W h it e

M ic ro G re y

B la c k

V e n e e r

T o li d

W o

E g e b a n d

B ro w n O a k

B u rn t W a ln u t

C h a lk

O a k

E b o n iz e d

W a ln u t

F la t o r

M o ld e d

E d g e b a n d

B la c k

B ri g h t

W h it

(fl t o n ly

M in k In n e rt o n e

P la ti n u m

F o lk s to n e G re y

L e g a

G ro m m e t

J e t

B la c k

M e d iu m

M e ta lli c y

A n o d iz

A lu m in u m

B ri g h t

W h it e

P e rf o ra m in u m

B ru s h e d

S a n d

F o lk s to n e G re y

M e d iu m

G y

(m ld e d o n ly

L ig h t

G ld e d o n ly

G ra p h it e O a k

L ig h t

O a k

M a p le N a tu ra l B e e c h

O ld

E n g lis h W a ln u t

W a rm

B ro

W ln u t

A m e ri c a n W a ln u t

N a tu ra l O a k

E b o n iz e d

O a k

F u m e d

O k

P p e ll e r T h e P ro p e ll e r®

C o ll e c ti o n d e li v e rs a s e ri e s o f tr a in in g a n d c o n fe re n ta b le s t h a t in te g ra te a c ro s s t h e o ffi c e o r le a rn in g e n v ir o n m e n t.

C o m b in a n g e o f b a s e o p ti o n s w it h a s o p h is ti c a te d a e s th e ti c P ro p e ll e r h a s tu it iv e d e s ig n t h a t e n s u re s e a s e o f u s e t h ro u g h o u t e a c h w o rk s p a c e

T h e t a b le p ro v id tr u c tu ra l fr a m ic h a ls o s e rv a h o ri z o n ta l w ir e m a n a g e m e n t c h a n n e l.

C o n fe re n c e T a b le s

E n h a n c e d s p a c e i n t s e s u p p o rt s v e rt ic a l w ir n a g e m e n t a n d t h e a b il to o n c e a l fl o o r m o n u m e n ts

C o n fe re n c e t a b le s f e a tu re e le g a n t d e ta il d a re a v a il a b le i n a w id e a rr a y o f la m in a d w o o d v e n e e rs

MANUFACTURER:

DESCRIPTION:

MODEL NO.:

DIMENSIONS:

FINISH:

FABRIC:

ROOM NO.LOCATIONS:

CATALOG SHEET:

CH2 GUEST CHAIR

KNOLL {BASIS OF DESIGN)

HARDWOOD SIDE CHAIR WITH ARMS, UPHOLSTERED SEAT,

WITH DOWEL AND MORTISE AND TENON CONSTRUCTION,

STEAM BENT TOP RAIL, SEAT CUSHION USES HIGH DENSITY

POLYURETHANE FOAM AND ELASTIC SEAT BELT SUSPENSION,

NYLON GLIDES.

KRUSIN SIDE CHAIR

23.5”Wx21.75”Dx30.5”H (arm height 24.5”)

WALNUT

MOMENTUM PATTERN ANGLE, COLOR BALTIC

101(4),104(1),105(1),107(15)

Arm Option: with Arms Armless with Arms Frame Finish: American Walnut

Upholstered back inset

Seat cushion and back inset in a range of KnollTextiles

Seat cushion and back inset in a range of Spinneybeck® leathers

Uncoated, natural woven paper rush seat on slat-back chairs

12 Beech frame stains

7 low gloss natural wood finishes on White Ash, Oak, and American Walnut

CONSTRUCTION AND DETAILS

Frame is select American and European hardwood using dowel and mortise + tenon construction with steam-bent top rail

Upholstered seat cushion uses high-density polyurethane foam and elastic seat belt suspension

Nylon glides included

SUSTAINABLE DESIGN AND ENVIRONMENTAL CERTIFICATION

GREENGUARD Indoor Air Quality Certified® for low-emitting products

MANUFACTURER:

DESCRIPTION:

MODEL NO.:

DIMENSIONS:

FINISHES:

ROOM NUMBER LOCATION:

CATALOG SHEET:

A3 WALL MOUNT TV

SAMSUNG ( )

V, LED, 2160p

SMART, 4K ULTRA HD, WITH HIGH DYNAMIC

RANGE CLASS

AUTO POWER OFF, QUAD-CORE PROCESSOR, USB

HUMAN INTERFACE DEVICE (HID)

UHD DIMMING, PURCOLOR, MEGA DYNAMIC CONTRAST

RATIO

AUTO CHANNEL SEARCH

CAPTION (SUBTITLE)

EMBEDDED POP, FILM MODE, ULTRA CLEAN VIEW

WI-FI DIRECT, ANYNET PLUS, ECO SENSOR, AUTO CHANNEL

SEARCH

SPORTS MODE, BD WISE PLUS, CONNECTSHARE, AUTO

MOTION PLUS

CONTRAST ENHANCER, SAMSUNG APPS

PICTURE IN PICTURE UN48JU6400FXZA

BLACK

101(1), 103(1), 107( ),108(1)

Samsung 60" Class Smart LED 1080p HDTV with AppPack

Class is in session. Get ready for a smarter breed of entertainment when you plug in the Samsung UN60J6200 Smart LED HDTV.

Your pop culture curriculum goes way beyond just TV these days--there's online shopping to do, social media to update, and YouTube videos to enjoy. Luckily, with Samsung Smart TV technology and built-in Wi-Fi, you can do all this and more right on the 60" diagonal screen. And it does it all in the crisp 1080p Full HD detail you've come to expect from a head-of-the-class TV. From Samsung.

When your HDTV arrives, dive in headfirst. You'll get a heap of additional software for your Smart TV in the Smart TV Essentials app pack.

Includes UN60J6200 Smart HDTV with standard remote control, 2 AAA batteries, power cable, and manual; Smart TV Essentials digital download 60" diagonal LED display Full HD 1080p resolution Motion Rate 120 Wide Color Enhancer Built-in 802.11n Wi-Fi; Wi-Fi Direct Smart TV: Smart Apps, full Web browser Smart Connectivity: Mobile Screen Mirroring, ConnectShare Movie

Dolby Digital Plus DTS Premium Sound 5.1 DTS Studio Sound Anynet+ VESA 400x400 wall-mountable Two USB ports Two HDMI inputs Component/composite shared input Approximate measurements: With stand 54-1/8"W x 34"H x 13"D, weighs 60 lbs; Without stand 54-1/8"W x 31-1/2"H x 3-3/4"D, weighs 50.7 lbs

With 4K UHD resolution you’ll enjoy a picture with 4X the detail of Full HD. Watch and play your way with the advanced Samsung Smart TV platform that lets you

About This Product

SIZE

60"

4K UHD Series Smart TV

• Beautifully Thin and Flat Design

• Enjoy Fluid Picture Quality with Motion Rate 120

• Vibrant PurColor Technology

• Effortless Smart Hub Built in Wi-Fi quickly and easily access your favorite content. Plus, this 4K UHD TV complies with the Consumer Electronics Association specification guideline requirements that includes full RGB color resolution.

4K UHD

Enjoy incredible picture crispness and dramatic detail, no matter how big the screen, with 4X the resolution of full HD.

PurColor

CEA 4K UHD

COMPLIANT

Complies with the Consumer Electronics Association 4K Ultra High-Definition specification requirements.

J.D. POWER

RANKED

Enjoy incredible shades of color, as nature intended, with technology that accurately blends primary and secondary colors for spectacular picture performance.

UHD Dimming Experience UHD picture quality with deeper blacks, purer whites, brighter colors, and enhanced detail in every image

Contrast Enhancer Experience a greater sense of depth with optimized contrast across multiple zones of the screen.

Two Years in a Row!

“Highest in Customer Satisfaction with TVs less than 50 Inches” by J.D.

Power . †

MANUFACTURER:

DESCRIPTION:

MODEL NO.

DIMENSIONS:

FINISHES:

ROOM NO. LOCATION:

CATALOG SHEET:

RC1 DESKSIDE RECYLCING BASKET

RUBBERMAID (BASIS OF DESIGN)

RECTANGULAR 41 1/4 QT RECYCLING BASKET

FG295773

20”Hx11”Wx15 1/4”L

BLUE VINYL

101(2),102(1),103(4),104(1),105(1),106(1),107(1)

K5ENDLLC

Cross-Out

Item: 756076 Model: FG295773BLUE

Product Details

• Dark blue

• Capacity: 10.3gal

• Dimension: 19 7/8"H X 11"W X 15 1/4"L

Recycling Bins

15.25

Indoor

No

Blue

Material Plastic

Depth (in.) 11

Height (in.) 19.8

Handle No

Bin Lid Type No Lid

Product Details

Rubbermaid Recycling bin in blue color comes in seamless construction that offers leak resistance. Bin measuring 20" X 11" X 15 1/4" with printed recycling symbol allows fast, easy/efficient recycling collection and is ideal for office usage.

• Dark blue

• Capacity: 10.3gal

• Dimension: 19 7/8"H X 11"W X 15 1/4"L

• 41 1/4 qt

• Type: Utility

• Function: Recycling

• Go green: Eco friendly

• Outside diameter: 19.9"

• Shape: Rectangular

• Designed to be used with existing office containers and accessories

• Promote fast, easy and efficient recycling collection

• All plastic construction will not rust, chip or peel and easy and effective way to collect waste paper

• Contains post consumer recycled resin (PCR) exceeding EPA guidelines

• Recycling symbol imprinted on the containers with variety of shapes and capacities to suit your workspace

Specifications Trash Can & Recycling Bin Capacity (gal.)

Trash Can & Recycling Bin Type

Width (in.)

Usage Area

Lid Lock

Color Family

QTY:

MANUFACTURER:

DESCRIPTION:

DIMENSION:

MODEL:

FINISH:

ROOM NO. LOCATIONS:

CATALOG SHEET:

WB1 OFFICE WHITEBOARDS

QUARTET (basis of design)

MAGNETIC WHITEBOARD, BLACK ALUMINUM FRAME, RESISTS

GHOSTING, 20 YR WARRANTY

3'X5’

PRESTIGE TOTAL ERASE

WHITE W/BLACK ALUMINUM FRAME

101(1),102(1),103(1),104(1),105(1),106(1),107(1),108(1)

ATTACHED

NOTE: VERIFY DESIRED LOCATIONS W/ USER GROUPS PRIOR

TO INSTALLING BLOCKING

6' x 4'

Quartet® Prestige® 2 Total Erase® Magnetic Whiteboards, Black Aluminum Frame

Magnetic Total Erase® board with 20 year warranty offers a high level of durability to resist ghosting and staining over time, which typically occurs from frequent dry-erase writing. The magnetic feature provides the extra functionality of being able to hang papers on the whiteboard surface using magnets. Featuring a specialized frame, this board has a professional appeal and can be paired with Quartet Prestige 2 Connects™ accessories to personalize its use for your needs.

Total Erase® magnetic whiteboard with 20 year warranty has a durable surface that resists ghosting and staining

Best suited for moderate use in spaces with regular traffic

Erases cleanly and will remain pristine with only occasional maintenance

Magnetic feature allows whiteboard to double as a magnetic bulletin board

Whiteboard surface is printed with a light grid pattern, only visible up close, to help keep writing aligned

Quartet® Prestige® 2 board frame sides and full-length marker tray are specially designed to securely hold all Quartet® Prestige 2 Connects™ accessories

Pass-through mounting makes it incredibly simple to accurately hang board

6'W x 4'H with black, aluminum frame

Includes one Quartet® chisel-tip dry-erase marker

Made in the USA and TAA Compliant

WHITE BOARDS FOR PRIVATE OFFICES

MANUFACTURER:

DESCRIPTION:

MODEL NO.:

DIMENSIONS:

FINISHES:

ROOM NUMBER LOCATION: 108

CATALOG SHEET: ATTACHED

A1 REFRIGERATOR

Whirlpool (basis of design)

20 cu ft counter depth french door refrigerator

WRF535SWHZ

36”Wx70.5"Hx35.5"D"

STAINLESS STEEL

Whirlpool 25.2 cu ft French Door Refrigerator (Stainless Steel) ENERGY STAR

Model # WRF535SWHZ Manufacturer Color/Finish

Stainless Steel

Specifications

Key Specs Voice Assistant Built-in (D

Product Height (D

Product Width (D

Height To Top Of Refrigerator (Without Hinges) (D

Height To Top Of Door Hinge (D

Depth Without Handle (D

Depth With Handle (D

Total Capacity

Refrigerator Style

Ice Maker

Lighting Type

App Compatible (D

Color Finish

General Product Name

Brand

Model Number

Color

Color Category

Color Finish

No

70 1/8 inches

35 5/8 inches

68 13/16 inches

70 1/8 inches

33 inches

35 1/2 inches

25.19 cubic feet

French Door

Yes

LED

No

Stainless steel

25.2 Cu. Ft. French Door Refrigerator with Internal Water

Dispenser

Whirlpool

WRF535SWHZ

Stainless steel

Silver

Stainless steel

MANUFACTURER:

DESCRIPTION:

MODEL NO.:

DIMENSIONS:

FINISHES:

A2 COMMERCIAL MICROWAVE

SHARP (basis of design)

Professional Microwave Oven

120V@60Hz

Output Watts 1000

.95 cu. Ft.

Commercial UL LISTED E44459, FCC, DHHS and NSF

1 touch cooking, compact design, 10 memory presets, dial timer

Weight: 44.5 lbs.

#R21LCF

20 ½”Wx16”Dx12 1/8”H

Stainless Steel

ROOM NUMBER LOCATION: 108

CATALOG SHEET: ATTACHEDD

SHARP

Microwave, Commercial, Digital Timer

Item # 6T392 Mfr. Model # R21LCF UNSPSC # 48101516

Catalog Page # 1534 Shipping Weight 44.5 lbs.

Item Professional Microwave Oven

Voltage 120V @ 60 Hz

Output Watts 1000

Color Stainless Steel

Oven Capacity 0.95 cu. ft.

Outside Width 20-1/2"

Outside Depth 16"

Outside Height 12-1/8"

Standards Commercial UL Listed E44459, FCC, DHHS and NSF

Features 1-touch cooking, compact design, 10 memory presets, Dial Timer

Product Details Compact design with automatic cook options allow 1-touch cooking and has up to 10 memory presets. Suitable for high-volume use.

Technical Specs

SHARP

Stainless Steel Professional Microwave Oven, 0.95 cu. ft., 120V @ 60 Hz

PRODUCT DETAILS

Compact design with automatic cook options allow 1-touch cooking and has up to 10 memory presets. Suitable for high-volume use.

TECHNICAL SPECS

Item Professional Microwave Oven Outside Width 20-1/2"

Voltage 120V @ 60 Hz Outside Depth 16"

Output Watts 1000 Outside Height 12-1/8"

Color Stainless Steel

Oven Capacity 0.95 cu. ft.

Standards Commercial UL Listed E44459, FCC, DHHS and NSF

Features 1-touch cooking, compact design, 10 memory presets, Dial Timer

MANUFACTURER:

DESCRIPTION:

MODEL NO.

DIMENSIONS:

FINISHES:

ROOM NO. LOCATION:

CATALOG SHEET:

WS1 L SHAPE WORKSTATION

KNOLL (BASIS OF DESIGN)

Desk w/1 box/box/file Pedestal,1 file/file Pedestal,w/laminate worktop,upper storage cabinets,tackboard under upper cabinets

DIVIDENDS HORIZON

72”x30Dx63"H with 48”wx24"D"extension

Beige Mist Metallic w/Micro Grayy Laminate work surface

101(2),103(4),105(1)

Attached

Mfg.

Detailed Description:

Product Finishes:

Other:

l

Paint

Knoll, Inc.

Knoll, Inc.

Dividends

Per Typical

72 X 78 X 28.5 (in inches unless noted otherwise)

Remarks:

Knoll, Dividends used as the

"Basis of Design"

72" wide x 30" deep desk, with laminate top, full modesty panel, bbf fixed pedestal with 48 "wide return 2 4" deep.with 3/4 modesty panel, with fixed FF pedestal, locking Self supportive, desk mounted, Overhead storage unit with lock and task light, with tackboard. Please find the attached specification for the office furniture, based on the plan.

Paint is 611 T, Beige Mist metallic, a textured paint, the laminate on the worksurface is Micro gray 121, and the panel fabric and tackboard fabric is Broadcloth, W-1619/2

Taupe.

Laminate Fabric-W-1619 / 2 Taupe

L SHAPE WORKSTATIONS

MANUFACTURER:

DESCRIPTION:

MODEL NO.

DIMENSIONS:

FINISHES:

ROOM NO. LOCATION:

CATALOG SHEET:

D1 DOUBLE PEDESTAL DESK

KNOLL (BASIS OF DESIGN)

Double Pedestal Desk w/ 2 BOX/BOX/FILE Drawer Units

Laminate Top

DIVIDENDS HORIZON

72”Wx30”D

Beige Mist Metallic w/Micro Gray Laminate work surface

102(1),104(1))

Preconfigured Desks Single and Double Pedestal Specifications

Single and Double Pedestal Desks

Dividends freestanding single and double pedestal desks can be specified "Preconfigured" or by component for "Build-to-Spec" applications. These applications include when a different pedestal drawer configuration is required, or when back panels are not needed.

"Preconfigured" single pedestal desks consist of a worksurface, box/box/file pedestal, "L.:' shaped end panel and half-height back panel.

"Preconfigured" double pedestal desks consist of a worksurface, two pedestals (file/file and box/ box/file) and half-height back panel.

Available Sizes

• Height: 28'/,'

• Depths: 24", 30" and 36"

(Double pedestal desk only

• Widths: 60", 66" and 72"

• Worksurface thickness: 1 '//

Single Pedestal Desk

6(1 Double Pedestal Desk

"Build-to-Spec" Desks

For "Build-to-Spec" desks specify by component. Refer to individual component category for information.

Construction

All freestanding desks match the aesthetics and dimensions of Dividends panel components.

Drawers over1ay the cabinet front and feature soflly-radiused pulls, drawer fronts and drawer trim

Half-height back panels extend 11" from the bottom of the worksurface, are inset 3/," from the pedestal backs and match the sottly-radiused aesthetics of other Dividends components.

Worksurface support is provided by pedestals and end units which are non-handed and shipped knocked down.

This allows pedestals and end units to be positioned at either end of worksurfaces.

Desk Components

Cw �

I ''""'' �:11d Lnir

P<-d1��tal

Optional Edge Grommet

\la11age11w11t Cap

DividerHb I lorizo11

Locks

Desk pedestals can be ordered with or without locks. When specified without locks. a lock plug is included. An optional lock retrofit kit is available for field-installation of locks at a later date if required. Locks are keyed randomly unless otherwise specified. Other keying options include keyed alike or l<eyed with IOCI< cores K001-K250 All locl<S are factory-installed and have a black finish.

Accessory

Hanging file bars for front-to-back or side to-side filing are included with pedestals.

Freestanding Desk Configurations

2,tlJ :l()[)

61)\X'

I I I I I I I I I I 71 I I 71

66\V

I I I I I I I I I I 71 I I 71

72\\1

I I I I I I I I

I I JI I I JI

Preconfigured De::;ks Returns and Bridge Units Specifications

End Panel and Pedestal Returns

Dividends freestanding returns can be specified "Preconfigured" or can be ordered by component for "Build-to-Spec" applications.

These applications include when a different pedestal drawer combination is required or wl1en back panels are not needed.

"Preconfigured" pedestal returns consist of a worksurface, file/file pedestal, and half-height back panel. "Preconfigured" end panel returns consist of a worksurface, "L" shaped end panel and half-height back panel.

Available Sizes

• Height: 28 ½"

• Widths: 36', 42" and 48'

• Depths: 18" and 24"

Attachment

Returns attach to adjacent desks or freestanding corner units with flat brackets. which are included.

Construction

All freestanding returns match the aesthetics of the Dividends panel system.

Drawers overlay the cabinet front and fenture softly-radiused pulls, drawer fronts and orawer trim.

Half-height back panels extend 11" from the bottom of the worksurface, are inset ¾" from the pedestal backs and match the softly radiused aesthetics of other Dividends components.

Workswiace support is provided by pedestals and end units which are non handed and sl1ipped knocked down.

This allows pedestals and end units to be positioned at either end of worksurfaces.

"Build-to-Spec" Returns and Bridges r=or "Build-to-Spec" returns and bridges, specify by component. Refer to the individual component categories for information.

Dividend,; I lorizo11

Accessory

Hanging file bars for front-to-back or side to-side filing are included with pedestals.

Bridge Units

Bridge units are used to form freestanding

"U" st1aped workstations.

Bridge units consist of a worksurface and back panel and connect to adjacent fre.>estanding components with flat brackets which are included.

Available Sizes

• Height: 28'/,"

• Widths: 30", 36", 42" and 48"

• Depths: 18" and 24"

Pedestal Return Return Sizes Available Freestanding Configuration

End Panel Return

180 2.rn

:1ow [[] [D 30W r I D 12W I I I [D -12\V r I CJ 18W

I I I

Bridge Unit Sizes Available

:JO\V

,J2\V

�2\V

IBW

D

D I I

I I

D

CJ

I I

Singl" prclestal desk --

Bridg1" unit

--Si11gl1• p,·dc·:--lal <lt·='k

Flip-Up Door Overheads

Panel- and Wall-Mounted

Dividend:, I lorizo11

Dividends Series 1, Series 2 and Series 3 Overheads - Specifi,cations

Flip-Up Door Overheads

Flip-up overheads mount to the integral vertical channels on Dividends Horizon panels or wall mount tracks to provide overhead storage within workstations or private offices.

Flip-up overhead cabinets consist of a top, shelf, end panels, overhead door with or without lock and required assembly screws.

30" to 48" wide cabinets have single doors while cabinets 54", 60", 66" and 72" wide have double doors. 54" wide overhead cabinets will ship with one 24" and one 30" door. 66" wide overhead cabinets will ship with one 30" and one 36" door. 54" and 66" overhead doors may be removed and reversed.

Overheads must match the width of single or multiple panels and cannot be mounted off module. All cabinets are shipped knocked-down.

Series 1 Flip-up Door Overhead

Series 1 flip-up overhead cabinets match the aesthetics of the original Dividends Horizon system. The radiused fronts and molded plastic end trim match the radiused profile trim used on panel topcaps and end trim. Series 1 cabinets are offered with steel doors.

Series 2 Flip-up Door Overhead

Series 2 overhead cabinets offer an alternative aesthetic to the original Dividends Horizon Series 1 overhead. Unlike the radiused door profile of the Series 1 overhead door, the Series 2 door profile is rectilinear with soft radiused corners (see door profile drawing below). The Series 2 overhead offers a painted steel or veneer overhead door front.

Flip-up Door Overhead Configurations

2-1--48 Wide

Overhead Cahinel

(Si111,!lc Door)

Series 3 Flip-up Door Overhead Series 3 cabinets offer a third aesthetic choice for flip-up overhead cabinets. The series 3 door profile is similar to the rectilinear door of the Series 2 cabinet, but the corners have a sharper radius to complement Dividends Horizon flat profile trim. Series 3 cabinets are offered with steel, laminate or veneer doors.

Note: Horizon Series 3 overheads are designed to complement and work next to other Series 3 overheads only.

Available Sizes

• Height: 15"

• Depth: 14 'la"

• Widths: 24", 30", 36", 42", 48", 54" 60", 66" and 72"

Construction:

• Horizontal top and shelf: 18-gauge painted roll-formed steel

• Overhead door:

- Steel: 20-gauge painted steel

- Laminate: 314" particle board with laminate on the outside and a paper backer on the inside. 1mm edgeband.

- Veneer: 314" thick particle board with 0.6mm thick veneer on the top and edge.

• Overhead door end trim: Color injected, molded plastic (on Series 1 only)

• End panels: 16-gauge painted steel with integral mounting hooks

• Overhead door suspension:

Steel ball bearing

Interior Dimensions

Fronl Vic\,, l111crior Hci�ht

!;4 or 6(i" Wide

0Vf�rl1rad l.ahinf't

(Double Door)

II IIJ

Top \'i,•w, l111erior Depih

72 Wide

Overhead Cauinel

(Offsel Double Dour)

Cabinet Door Clearance lfi 'I, _J Side View

Interior Dimensions

The interior dimensions of overhead cabinets and shelves are:

• Depth: 12"

• Usable interior height: 12%"

• Width: 'la" shorter than the exterior width

Cabinet Door Clearance

Cabinet doors open over the tops of cabinets.

Required clearance is 16'1/ total height (height of cabinet plus top clearance required).

Touchdown Overhead Cabinets

Touchdown overhead cabinets are equipped with hydraulic assist cylinders that allow the overhead cabinet front to gently fall to a closed position.

Retrofit mechanisms may be field added to any flip-up overhead cabinet with a steel door.

Note: Touchdown mechanisms are not available with laminate or veneer doors.

Task Lights

All Dividends cabinets and shelves will accept task lights. Task lights must be specified separately.

Locks

Locks are standard on overhead cabinets and keyed randomly unless otherwise specified.

Other keying options include keyed alike or keyed with lock cores K001-K250. All locks are factory-installed and are black finish.

Cabinets can also be specified without locks if required. When locks are not specified on Series 1 and Series 2 overheads, a plug is located in the lock position. Lock retrofit kits are available for field installation at a later date for Series 1 and Series 2 overheads only.

Note: Horizon Series 3 flip-up overheads are only available in Knoll Core finishes.

Flip-up Door Overhead Profiles

Series 1

II_[/�

I ,.;.,, Is,,,;", Pedeslals Dividends l lorizon

Dividends Floorstanding, Duublewide and Mobile Specifications

Floorstanding Pedestals

Dividends Series 1 floorstanding pedestals are used to support worksurfaces in both panel wrap and freestanding desk applications. No cantilevers or other supports are required at the end of the worksurface supported by a pedestal.

For panel-wrap applications, three depths are available in order to mount beneath 18', 24' and 30" deep worksuriaces.

In floorstanding desks, pedestals can either be specified "Preconfigured" with floorstanding desks or ordered by component for "Build-to-Spec" applications.

Two drawer configurations are available:

box/box/file and file/file. Pedestals can be specified with or without locks.

Mobile Pedestals

Dividends Series 1 mobile pedestals provide moveable storage within workstations and tuck beneath worksurfaces when not in use. Available drawer configurations are box/box/file, box/file, and file/file.

Mobile pedestals roll on four corner-mounted swivel casters and one bottom drawer-mounted caster for stability when the lower drawer is in the open position.

The front corner casters are locking.

Mobile pedestals may be specified with an optional handle allowing easy mobility. All mobile pedestals include 13-gauge finished tops. All other construction and drawer dimensions are the same as freestanding pedestals.

Mobile pedestals measure 20%" and 265/a" high, 15" wide and 18" or 24' deep.

All mobile pedestals include locks.

Fn.Hll -lo-l,ack Crn11Ui11al ion Side-to-side

(letter)

"" I ,.., I

300 I

(l<'l lcr/lcgal)

11111111111111

11111111111111

11111111111111

(lcllcr)

11111111111111

11111111111111

Pedestal Filing Configurations

Available Sizes

Depths: 18", 24" and 30" Width: 15" Height: 20½" and 26'//

Doublewide Pedestals

The doublewide pedestal incorporates two 12" high drawers in a 30" width (18 ¾" depth) and is intended for below worksuriace applications only. The doublewide's design allows for side-to-side letter or legal filing and front-to-back letter filing.

Doublewide pedestal can be used below 19', 24", or 36' deep worksurfaces, not 18" deep worksurfaces.

Available Size

Depth: 183/." (floorstanding pedestal only) Width: 30" Height: 26' Is

Construction

Floorstanding mobile and doublewide pedestals match the aesthetics and dimensions of

Dividends Horizon panel components.

• Outer wrapper: 20-gauge seamless steel wrapper, includes finished back and full dust pan

• Inner frame: 20-gauge steel uprights and 16-gauge cross rails

• Drawer front: 20-gauge steel, gently radiused (double wide front: 18-gauge)

• Drawer top cap trim: Color injected, molded plastic

• Box drawer suspension (floorstanding ped only): 3

/," extension, ball-bearing slides

SidHo-Side (l,11,r)

11111111111111111111111111111111

• File drawer suspension: Full extension, ball-bearing slides

• Drawer pulls: Color injected, molded plastic

• Leveling glides: 31." diameter steel stem witr1

1 ½"of height adjustment (double wide ped:

5/,6 diameter steel stem with a 19/,s" of height adjustment

Internal Drawer Dimensions (DS1)

Box drawer

• Internal height: 4 'I 15"

• Internal width: 129/w"

• Internal dept11s: 18" = 15'5/rn", 24" = 21 '/.."', 30" = 27¼"

File drawer

• Internal height: 9¼"

• Internal widlr1: 12'1.''

• Internal depths: 18" = 15"'/,s", 24" = 21 ¼", 30" = 27 1/.,"

File drawer (doublewide ped)

• Internal height: 9¼"

• Internal width: 26J/,"

• Internal deptl1: 153/,."

Locks

Pedestals can be ordered with or without locks. When specified without locks, a lock plug is included. An optional lock retrofit kit is available for field installation of locks at a later date if required.

Locks are keyed randomly unless otherwise specified. Other keying options include keyed alike or keyed with lock cores K001-K250. All random keyed locks are factory-installed and have a black finish.

Pedestal Accessories

A hanging file bar for front-to-back or side-to side filing is included with Series 1 pedestals.

Sidc-lu-Sid<' (lqrnl)

111111111111111111111111111111

Doublewide…