PWS 12 Laundry Presses and 3 Piece Shirt System.docx
DOCX document 70 KB Posted
- Attached to
- WEST POINT- 12-HOT HEAD PRESSES & ONE 3 PEICE SHIRT SYSTEM Federal contract opportunity
- Solicitation number
- W911SD-23-R-0179
About this file
This memorandum outlines requirements for a laundry equipment procurement. The Department of the Army seeks to purchase twelve hot head steam presses, including apron and legger buck units as well as a double buck with vacuum component, cabinet sleever, and collar unit. The equipment will also require a buck steam pedal and insulated steam lines and heads. Additional requirements include adjustable auto-open and close timers, manual override controls, and adjustable air pressure regulators. Associated steam irons and installation of all equipment are also required. Bidders must complete a site visit, remove and dispose of existing equipment, install the new units and connect them to facility utilities, and provide a one-year parts and labor warranty.
The related federal contract opportunity is a solicitation from the Department of the Army seeking the above laundry equipment for West Point, with a closing date still to be determined.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| W911SD-23-R-0179-0004 WEST POINT -HOT HEAD PRESSES - ONE 3 PEICE SHIRT SYSTEM-CLAUSE CORRECTION.pdf | ||
| W911SD-23-R-0179-0003 WEST POINT -HOT HEAD PRESSES - ONE 3 PEICE SHIRT SYSTEM-RFIs.pdf | ||
| PRS.docx | DOCX document | |
| W911SD-23-R-0179-0001 WEST POINT -HOT HEAD PRESSES - ONE 3 PEICE SHIRT SYSTEM.pdf | ||
| PWS 12 Laundry Presses.docx | DOCX document | |
| W911SD-23-R-0179- WEST POINT -HOT HEAD PRESSES.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE ARMY
LRC WEST POINT
Bldg. 845 Laundry Plant West Point, NY 10996
ASPA-LWP-SSL 13 JUNE 2023
Memorandum To: MICC Contract Specialist
Subject: Hot Head Laundry Steam Press (12 each) PWS/Specs
Requirement: The Laundry Facility requires 12 each Hot Head Steam Presses, and additional Three Piece Shirt System to accomplish the mission of laundering clothing and linens for the USMA cadets and Medical Treatment Facilities. The equipment will replace the current items which are well beyond life cycle expectancy and could cause a delay in the processing of laundry. The presses have a life cycle expectancy of 20 years but are now 63 years old. These are utilized daily to accomplish the mission and meet terms and conditions of the laundry contract. To maintain operational tempo with properly maintained equipment, operation must be seamless and result in minimal operational deficiencies. The intent is to purchase the equipment as soon as practical utilizing the following specifications.
Hot Head Laundry Steam Presses and Three Piece Shirt System Specifications:
1. 3 each Laundry Hot Head units to be Apron buck & head approximately 54” x 17-20” padded buck with a bare steel head
2. 9 each Laundry Hot Head units to be Legger buck and head approximately 53-57” x 16-20” Padded buck with a bare steel head
3. 1 each Double Buck with vacuum component
4. 1 each Cabinet Sleever
5. I each Collar with wide cuff radius
6. Buck steam pedal
7. All heads and steam lines need to be insulated on the outside to prevent burns
8. Adjustable time before auto opening
9. Manual open override control
10. Two hand auto closing
11. Adjustable air pressure regulator
12. All steam iron alongside each press
13. 100 psi airline pressure
14. 100 psi steam pressure
15. Turn key install w/ all covers & pads in place
Vendor Requirements:
1. Must complete a site visit to examine current equipment and ensure new equipment will be compatible with all electric, plumbing, and steam, as necessary, and fits into installation space provided.
2. Must remove and dispose of current steam iron press equipment, including disconnect of all components tied into facility utilities, and install new equipment.
3. The vendor will be responsible for shipping, delivering, uncrating, installation, start-up, electrical, and demonstration of new equipment and removal of packaging and installation materials. Installation to include connection of new equipment to all existing electric, plumbing, and steam.
4. Must include a standard 1-year warranty on parts and workmanship.
UNCLASSIFIED
UNCLASSIFIED
image1.png
File details come from the government source that posted it. Updated .