UFGS_26_28_01.00_10_Coordinated_Power_System_Protection.pdf

PDF 138 KB Posted

Attached to
Install 400A Electrical Service to Room 003, Building 35, for the Vertical Lifting Machines (VLMs) at Watervliet Arsenal
Solicitation number
W911PT26QA013
Issued by

About this file

This document is a Unified Facilities Guide Specification (UFGS) for Coordinated Power System Protection, specifically section 26 28 01.00 10, dated October 2007. The specification provides comprehensive technical requirements for electrical power system protection equipment and devices, covering products like motor controls, circuit breakers, fuses, protective relays, and instrument transformers across low, medium, and high voltage systems.

The specification details technical requirements for equipment installation, testing, and performance, with a strong emphasis on system coordination and protection. Key components include provisions for fault current analysis, protective device coordination studies, and field testing procedures. The document specifies requirements for various electrical protection devices such as molded-case circuit breakers, power circuit breakers, protective relays, and instrument transformers, with detailed technical specifications for construction, ratings, and performance characteristics. It is intended to ensure reliable and safe electrical power system operation across different voltage levels and applications, with specific guidelines for installation, examination, and field testing of protective equipment.

View the file

Other files

Show all 14

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

USACE / NAVFAC / AFCEC / NASA UFGS- 26 28 01. 00 10 ( Oct ober 2007) Pr epar i ng Act i v i t y: USACE Super sedi ng UFGS- 26 28 01. 00 10 ( Apr i l 2006)

UNI FI ED FACI LI TI ES GUI DE SPECI FI CATI ONS

Ref er ences ar e i n agr eement wi t h UMRL dat ed Apr i l 2018

SECTI ON TABLE OF CONTENTS

DI VI SI ON 26 - ELECTRI CAL

SECTI ON 26 28 01. 00 10

COORDI NATED POWER SYSTEM PROTECTI ON

10/07

PART 1 GENERAL

1. 1 REFERENCES

1. 2 SYSTEM DESCRI PTI ON

1. 3 SUBMI TTALS

1. 4 QUALI TY ASSURANCE

1. 4. 1 Syst em Coor di nat or

1. 4. 2 Syst em I nst al l er

1. 5 DELI VERY, STORAGE, AND HANDLI NG

1. 6 PROJECT/ SI TE CONDI TI ONS

1. 7 EXTRA MATERI ALS

PART 2 PRODUCTS

2. 1 STANDARD PRODUCT

2. 2 NAMEPLATES

2. 3 CORROSI ON PROTECTI ON

2. 4 MOTOR CONTROLS AND MOTOR CONTROL CENTERS

2. 4. 1 Mot or St ar t er s

2. 4. 2 Reduced- Vol t age St ar t er s

2. 4. 3 Ther mal - Over l oad Pr ot ect i on

2. 4. 4 Low- Vol t age Mot or Over l oad Rel ays

2. 4. 4. 1 Gener al

2. 4. 4. 2 Const r uct i on

2. 4. 4. 3 Rat i ngs

2. 4. 5 Aut omat i c Cont r ol Devi ces

2. 4. 5. 1 Di r ect Cont r ol

2. 4. 5. 2 Pi l ot - Rel ay Cont r ol

2. 4. 5. 3 Manual / Aut omat i c Sel ect i on

2. 4. 6 Mot or Cont r ol Cent er s

2. 5 LOW- VOLTAGE FUSES

2. 5. 1 Gener al

2. 5. 2 Car t r i dge Fuses; Noncur r ent - Li mi t i ng Type

2. 5. 3 Car t r i dge Fuses; Cur r ent - Li mi t i ng Type

2. 5. 3. 1 Cont i nuous Cur r ent Rat i ngs ( 600 amper es and smal l er )

2. 5. 3. 2 Cont i nuous Cur r ent Rat i ngs ( gr eat er t han 600 amper es)

SECTI ON 26 28 01. 00 10 Page 1

2. 5. 3. 3 Mot or and Tr ansf or mer Ci r cui t Fuses

2. 6 MEDI UM- VOLTAGE AND HI GH- VOLTAGE FUSES

2. 6. 1 Gener al

2. 6. 2 Const r uct i on

2. 6. 3 Rat i ngs

2. 6. 3. 1 Fuse Cut out s

2. 6. 3. 2 Power Fuses

2. 6. 3. 3 E- Rat ed, Cur r ent - Li mi t i ng Power Fuses

2. 6. 3. 4 C- Rat ed, Cur r ent - Li mi t i ng Fuses

2. 6. 3. 5 R- Rat ed, Cur r ent - Li mi t i ng Fuses

2. 7 MOTOR SHORT- CI RCUI T PROTECTOR ( MSCP)

2. 7. 1 Gener al

2. 7. 2 Const r uct i on

2. 7. 3 Rat i ngs

2. 8 MOLDED- CASE CI RCUI T BREAKERS

2. 8. 1 Gener al

2. 8. 2 Const r uct i on

2. 8. 3 Rat i ngs

2. 8. 4 Cascade Syst em Rat i ngs

2. 8. 5 Ther mal - Magnet i c Tr i p El ement s

2. 8. 6 Sol i d- St at e Tr i p El ement s

2. 8. 7 Cur r ent - Li mi t i ng Ci r cui t Br eaker s

2. 8. 8 SWD Ci r cui t Br eaker s

2. 8. 9 HACR Ci r cui t Br eaker s

2. 8. 10 Mot or Ci r cui t Pr ot ect or s ( MCP)

2. 9 LOW- VOLTAGE POWER CI RCUI T BREAKERS

2. 9. 1 Const r uct i on

2. 9. 2 Rat i ngs

2. 10 MEDI UM- VOLTAGE CI RCUI T BREAKERS/ I NTERRUPTERS

2. 10. 1 Met al - Encl osed Type

2. 10. 2 Met al - Cl ad Type

2. 10. 3 SF6 I nt er r upt er s

2. 10. 4 Vacuum I nt er r upt er s

2. 10. 5 Rat i ngs

2. 11 OI L CI RCUI T BREAKERS FOR SUBSTATI ONS

2. 11. 1 I ncomi ng Li ne Ci r cui t Br eaker s f or Subst at i ons

2. 11. 2 Li ne Ti e Ci r cui t Br eaker s f or Subst at i ons

2. 12 SUBSTATI ON AND SWI TCHGEAR PROTECTI VE RELAYS

2. 12. 1 Const r uct i on

2. 12. 2 Rat i ngs

2. 12. 3 Over cur r ent Rel ays

2. 12. 4 Di r ect i onal Over cur r ent Rel ays

2. 12. 5 Aut omat i c Recl osi ng Rel ay

2. 12. 6 Tr ansf or mer Di f f er ent i al and Lockout Rel ays

2. 12. 7 Bus Di f f er ent i al and Lockout Rel ays

2. 13 I NSTRUMENT TRANSFORMERS

2. 13. 1 Gener al

2. 13. 2 Cur r ent Tr ansf or mer s

2. 13. 2. 1 For Oi l Ci r cui t Br eaker s

2. 13. 2. 2 For Power Tr ansf or mer s

2. 13. 2. 3 For Met al - Cl ad Swi t chgear

2. 13. 2. 4 For kW Hour and Demand Met er i ng ( Low Vol t age)

2. 13. 2. 5 Vol t age Tr ansf or mer s

2. 14 COORDI NATED POWER SYSTEM PROTECTI ON

2. 14. 1 Scope of Anal yses

2. 14. 2 Det er mi nat i on of Fact s

2. 14. 3 Si ngl e Li ne Di agr am

2. 14. 4 Faul t Cur r ent Anal ys i s

2. 14. 4. 1 Met hod

SECTI ON 26 28 01. 00 10 Page 2

2. 14. 4. 2 Dat a

2. 14. 4. 3 Faul t Cur r ent Avai l abi l i t y

2. 14. 5 Coor di nat i on St udy

2. 14. 6 St udy r epor t

PART 3 EXECUTI ON

3. 1 EXAMI NATI ON

3. 2 I NSTALLATI ON

3. 3 FI ELD TESTI NG

3. 3. 1 Gener al

3. 3. 2 Saf et y

3. 3. 3 Mol ded- Case Ci r cui t Br eaker s

3. 3. 4 Power Ci r cui t Br eaker s

3. 3. 4. 1 Gener al

3. 3. 4. 2 Power Ci r cui t Br eaker Test s

3. 3. 5 Pr ot ect i ve Rel ays

- - End of Sect i on Tabl e of Cont ent s - -

SECTI ON 26 28 01. 00 10 Page 3

USACE / NAVFAC / AFCEC / NASA UFGS- 26 28 01. 00 10 ( Oct ober 2007) Pr epar i ng Act i v i t y: USACE Super sedi ng UFGS- 26 28 01. 00 10 ( Apr i l 2006)

UNI FI ED FACI LI TI ES GUI DE SPECI FI CATI ONS

Ref er ences ar e i n agr eement wi t h UMRL dat ed Apr i l 2018

SECTI ON 26 28 01. 00 10

COORDI NATED POWER SYSTEM PROTECTI ON

10/07

NOTE: Thi s gui de speci f i cat i on cover s t he r equi r ement s f or t he coor di nat ed pr ot ect i on of power systems.

Adher e t o UFC 1- 300- 02 Uni f i ed Faci l i t i es Gui de Speci f i cat i ons ( UFGS) For mat St andar d when edi t i ng t hi s gui de speci f i cat i on or pr epar i ng new pr oj ect speci f i cat i on sect i ons. Edi t t hi s gui de speci f i cat i on f or pr oj ect speci f i c r equi r ement s by addi ng, del et i ng, or r evi s i ng t ext . For br acket ed i t ems, choose appl i cabl e i t em( s) or i nser t appr opr i at e i nf or mat i on.

Remove i nf or mat i on and r equi r ement s not r equi r ed i n r espect i ve pr oj ect , whet her or not br acket s ar e present.

Comment s, suggest i ons and r ecommended changes f or t hi s gui de speci f i cat i on ar e wel come and shoul d be submi t t ed as a Cr i t er i a Change Request ( CCR) .

PART 1 GENERAL

1. 1 REFERENCES

NOTE: Thi s par agr aph i s used t o l i s t t he publ i cat i ons c i t ed i n t he t ext of t he gui de speci f i cat i on. The publ i cat i ons ar e r ef er r ed t o i n t he t ext by basi c desi gnat i on onl y and l i s t ed i n t hi s par agr aph by or gani zat i on, desi gnat i on, dat e, and t i t l e.

Use t he Ref er ence Wi zar d' s Check Ref er ence f eat ur e when you add a Ref er ence I dent i f i er ( RI D) out s i de of t he Sect i on' s Ref er ence Ar t i c l e t o aut omat i cal l y pl ace t he r ef er ence i n t he Ref er ence Ar t i c l e. Al so use t he Ref er ence Wi zar d' s Check Ref er ence f eat ur e t o updat e t he i ssue dat es.

SECTI ON 26 28 01. 00 10 Page 4

Ref er ences not used i n t he t ext wi l l aut omat i cal l y be del et ed f r om t hi s sect i on of t he pr oj ect speci f i cat i on when you choose t o r econci l e r ef er ences i n t he publ i sh pr i nt pr ocess.

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

ASTM I NTERNATI ONAL ( ASTM)

ASTM D2472 ( 2000; R 2014) St andar d Speci f i cat i on f or Sul phur Hexaf l uor i de

I NSTI TUTE OF ELECTRI CAL AND ELECTRONI CS ENGI NEERS ( I EEE)

I EEE 242 ( 2001; Er r at a 2003) Recommended Pr act i ce f or Pr ot ect i on and Coor di nat i on of I ndust r i al and Commer ci al Power Syst ems - Buf f Book

I EEE 399 ( 1997) Br own Book I EEE Recommended Pr act i ce f or Power Syst ems Anal ysi s

I EEE C2 ( 2017; Er r at a 1- 2 2017; I NT 1 2017) Nat i onal El ect r i cal Saf et y Code

I EEE C37. 04 ( 1999; R 2006; AMD 1 2003; R 2006; ERTA

2005; R 2006; AMD 2 2008; CORR 2009; I NT

2010) St andar d f or Rat i ng St r uct ur e f or AC Hi gh- Vol t age Ci r cui t Br eaker s

I EEE C37. 06 ( 2009) St andar d f or AC Hi gh- Vol t age Ci r cui t Br eaker s Rat ed on a Symmet r i cal Cur r ent Basi s - Pr ef er r ed Rat i ngs and Rel at ed Requi r ed Capabi l i t i es f or Vol t age Above 1000 V

I EEE C37. 13 ( 2015) St andar d f or Low- Vol t age AC Power Ci r cui t Br eaker s Used i n Encl osur es

I EEE C37. 16 ( 2009) St andar d f or Pr ef er r ed Rat i ngs, Rel at ed Requi r ement s, and Appl i cat i on Recommendat i ons f or Low- Vol t age AC ( 635 V and bel ow) and DC 3200 V and bel ow) Power Ci r cui t Br eaker s

I EEE C37. 2 ( 2008) St andar d f or El ect r i cal Power Syst em Devi ce Funct i on Number s, Acr onyms and Cont act Desi gnat i ons

I EEE C37. 20. 1 ( 2015) St andar d f or Met al - Encl osed Low- Vol t age Power Ci r cui t - Br eaker Switchgear

I EEE C37. 46 ( 2010) St andar d f or Hi gh Vol t age Expul s i on and Cur r ent - Li mi t i ng Type Power Cl ass

SECTI ON 26 28 01. 00 10 Page 5

Fuses and Fuse Di sconnect i ng Swi t ches

I EEE C37. 90 ( 2005; R 2011) St andar d f or Rel ays and Rel ay Syst ems Associ at ed Wi t h El ect r i c Power Appar at us

I EEE C57. 13 ( 2016) Requi r ement s f or I nst r ument Transformers

NATI ONAL ELECTRI CAL MANUFACTURERS ASSOCI ATI ON ( NEMA)

NEMA C37. 50 ( 2012) Amer i can Nat i onal St andar d f or Swi t chgear - - Low- Vol t age AC Power Ci r cui t Br eaker s Used i n Encl osur es - Test Procedures

NEMA FU 1 ( 2012) Low Vol t age Car t r i dge Fuses

NEMA I CS 1 ( 2000; R 2015) St andar d f or I ndust r i al Cont r ol and Syst ems: Gener al Requi r ement s

NEMA I CS 2 ( 2000; R 2005; Er r at a 2008) I ndust r i al Cont r ol and Syst ems Cont r ol l er s, Cont act or s, and Over l oad Rel ays Rat ed 600 V

NEMA I CS 3 ( 2005; R 2010) Medi um- Vol t age Cont r ol l er s Rat ed 2001 t o 7200 V AC

NEMA I CS 6 ( 1993; R 2016) I ndust r i al Cont r ol and Syst ems: Encl osur es

NEMA SG 4 ( 2009; R 2013) AC Hi gh- Vol t age Ci r cui t Breakers

NEMA SG 6 ( 2000) St andar d f or Power Swi t chi ng Equipment

NEMA/ ANSI C12. 11 ( 2007) I nst r ument Tr ansf or mer s f or Revenue Met er i ng, 10 kV BI L t hr ough 350 kV BI L ( 0. 6 kV NSV t hr ough 69 kV NSV)

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 70 ( 2017; ERTA 1- 2 2017; TI A 17- 1; TI A 17- 2;

TI A 17- 3; TI A 17- 4; TI A 17- 5; TI A 17- 6;

TI A 17- 7; TI A 17- 8; TI A 17- 9; TI A 17- 10;

TI A 17- 11; TI A 17- 12; TI A 17- 13; TI A

17- 14) Nat i onal El ect r i cal Code

U. S. DEPARTMENT OF DEFENSE ( DOD)

UFC 3- 310- 04 ( 2013; wi t h Change 1) Sei smi c Desi gn f or Buildings

UNDERWRI TERS LABORATORI ES ( UL)

UL 1203 ( 2013; Repr i nt Feb 2018) UL St andar d f or Saf et y Expl osi on- Pr oof and Dust - I gni t i on- Pr oof El ect r i cal Equi pment

SECTI ON 26 28 01. 00 10 Page 6 f or Use i n Hazar dous ( Cl assi f i ed) Locat i ons

UL 198M ( 2003; Repr i nt Feb 2013) St andar d f or Mi ne- Dut y Fuses

UL 486E ( 2015; Repr i nt Nov 2017) UL St andar d f or Saf et y Equi pment Wi r i ng Ter mi nal s f or Use wi t h Al umi num and/ or Copper Conduct or s

UL 489 ( 2016) UL St andar d f or Saf et y Mol ded- Case Ci r cui t Br eaker s, Mol ded- Case Swi t ches and Ci r cui t - Br eaker Encl osur es

UL 508 ( 1999; Repr i nt Oct 2013) I ndust r i al Cont r ol Equi pment

UL 845 ( 2005; Repr i nt Jul 2011) Mot or Cont r ol Centers

1. 2 SYSTEM DESCRI PTI ON

NOTE: Pr ovi de br i ef , gener al descr i pt i on of t he el ect r i cal power syst em pr oj ect .

Coor di nat e wi t h Sect i on 26 11 14. 00 10 MAI N ELECTRI C SUPPLY STATI ON AND SUBSTATI ON; Sect i on 33 71 01 OVERHEAD TRANSMI SSI ON AND DI STRI BUTI ON; Sect i on

33 71 02 UNDERGROUND ELECTRI CAL DI STRI BUTI ON;

Sect i on 26 20 00 I NTERI OR DI STRI BUTI ON SYSTEM.

The power syst em cover ed by t hi s speci f i cat i on consi st s of : [ _____] .

1. 3 SUBMITTALS

NOTE: Revi ew submi t t al descr i pt i on ( SD) def i ni t i ons i n Sect i on 01 33 00 SUBMI TTAL PROCEDURES and edi t t he f ol l owi ng l i s t t o r ef l ect onl y t he submi t t al s r equi r ed f or t he pr oj ect .

The Gui de Speci f i cat i on t echni cal edi t or s have desi gnat ed t hose i t ems t hat r equi r e Gover nment appr oval , due t o t hei r compl exi t y or cr i t i cal i t y , wi t h a " G. " Gener al l y, ot her submi t t al i t ems can be r evi ewed by t he Cont r act or ' s Qual i t y Cont r ol Syst em. Onl y add a “ G” t o an i t em, i f t he submi t t al i s suf f i c i ent l y i mpor t ant or compl ex i n cont ext of t he pr oj ect .

For submi t t al s r equi r i ng Gover nment appr oval on Ar my pr oj ect s, a code of up t o t hr ee char act er s wi t hi n t he submi t t al t ags may be used f ol l owi ng t he " G" desi gnat i on t o i ndi cat e t he appr ovi ng aut hor i t y.

Codes f or Ar my pr oj ect s usi ng t he Resi dent Management Syst em ( RMS) ar e: " AE" f or Ar chi t ect - Engi neer ; " DO" f or Di st r i c t Of f i ce ( Engi neer i ng Di v i s i on or ot her or gani zat i on i n t he

SECTI ON 26 28 01. 00 10 Page 7

Di st r i c t Of f i ce) ; " AO" f or Ar ea Of f i ce; " RO" f or Resi dent Of f i ce; and " PO" f or Pr oj ect Of f i ce. Codes f ol l owi ng t he " G" t ypi cal l y ar e not used f or Navy, Ai r For ce, and NASA pr oj ect s.

Use t he " S" c l assi f i cat i on onl y i n SD- 11 Cl oseout Submi t t al s. The " S" f ol l owi ng a submi t t al i t em i ndi cat es t hat t he submi t t al i s r equi r ed f or t he Sust ai nabi l i t y eNot ebook t o f ul f i l l f eder al l y mandat ed sust ai nabl e r equi r ement s i n accor dance wi t h Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG.

Choose t he f i r st br acket ed i t em f or Navy, Ai r For ce and NASA pr oj ect s, or choose t he second br acket ed i t em f or Ar my pr oj ect s.

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or [ Cont r act or Qual i t y Cont r ol appr oval . ] [ i nf or mat i on onl y. When used, a desi gnat i on f ol l owi ng t he " G" desi gnat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . ] Submi t t al s wi t h an " S" ar e f or i ncl usi on i n t he Sust ai nabi l i t y eNot ebook, i n conf or mance t o Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG. Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00

SUBMI TTAL PROCEDURES:

SD- 03 Pr oduct Dat a

Faul t Cur r ent Anal ysi s Pr ot ect i ve Devi ce Coor di nat i on St udy Equipment Syst em Coor di nat or Pr ot ect i ve Rel ays Installation

SD- 06 Test Repor t s

Fi el d Test i ng

SD- 07 Cer t i f i cat es

Devi ces and Equi pment

1. 4 QUALI TY ASSURANCE

1. 4. 1 Syst em Coor di nat or

Syst em coor di nat i on, r ecommended r at i ngs and set t i ngs of pr ot ect i ve devi ces, and desi gn anal ysi s shal l be accompl i shed by a r egi st er ed pr of essi onal el ect r i cal power engi neer wi t h a mi ni mum of [ 3] [ _____] year s of cur r ent exper i ence i n t he coor di nat i on of el ect r i cal power syst ems.

Submi t ver i f i cat i on of exper i ence and l i cense number , of a r egi st er ed Pr of essi onal Engi neer as speci f i ed above. Exper i ence dat a shal l i ncl ude at l east f i ve r ef er ences f or wor k of a magni t ude compar abl e t o t hi s cont r act , i ncl udi ng poi nt s of cont act , addr esses and t el ephone number s.

1. 4. 2 Syst em I nst al l er

Cal i br at i on, t est i ng, adj ust ment , and pl aci ng i nt o ser vi ce of t he

SECTI ON 26 28 01. 00 10 Page 8 pr ot ect i ve devi ces shal l be accompl i shed by a manuf act ur er ' s pr oduct f i el d ser vi ce engi neer or i ndependent t est i ng company wi t h a mi ni mum of t wo year s of cur r ent pr oduct exper i ence i n pr ot ect i ve devi ces.

1. 5 DELI VERY, STORAGE, AND HANDLI NG

Devi ces and equi pment shal l be v i sual l y i nspect ed when r ecei ved and pr i or t o accept ance f r om conveyance. Pr ot ect st or ed i t ems f r om t he envi r onment i n accor dance wi t h t he manuf act ur er ' s publ i shed i nst r uct i ons. Damaged i t ems shal l be r epl aced.

1. 6 PROJECT/ SI TE CONDI TI ONS

NOTE: Unusual ser vi ce condi t i ons f or al t i t ude st ar t above 1005 m 3300 f eet f or most appar at us. Unusual ambi ent t emper at ur e r anges ar e mi nus 30 t o 40 degr ees C mi nus 22 t o 104 degr ees F, but ot her ambi ent s may appl y. Fr equency i s gener al l y 60 Hz, al t hough 50 Hz may al so be st andar d. Fungus cont r ol f or el ect r i cal devi ces i s r equi r ed onl y i n t r opi cal areas.

Pr ovi de sei smi c r equi r ement s, i f a Gover nment desi gner i s t he Engi neer of Recor d, and show on t he dr awi ngs. Del et e t he i nappr opr i at e br acket ed phr ase. Per t i nent por t i ons of UFC 3- 310- 04 and Sect i ons 13 48 00, 23 05 48. 19 and 26 05 48. 00 10, pr oper l y edi t ed, must be i ncl uded i n t he cont r act documents.

Submi t cer t i f i cat es at t est i ng t hat al l devi ces or equi pment meet t he r equi r ement s of t he cont r act document s. Devi ces and equi pment f ur ni shed under t hi s sect i on shal l be sui t abl e f or t he f ol l owi ng s i t e condi t i ons.

Sei smi c det ai l s shal l [ conf or m t o UFC 3- 310- 04 and Sect i ons 13 48 00

[ SEI SMI C] BRACI NG FOR MI SCELLANEOUS EQUI PMENT, 23 05 48. 19 [ SEI SMI C]

BRACI NG FOR HVAC AND 26 05 48. 00 10 SEI SMI C PROTECTI ON FOR ELECTRI CAL

EQUI PMENT] [ be as i ndi cat ed] .

Altitude [_____]

Ambi ent Temper at ur e [ _____] degr ees C F

Frequency [_____]

Fungus Cont r ol [_____]

Hazar dous Cl assi f i cat i on [_____]

Humi di t y Cont r ol [_____]

Ventilation [_____]

Sei smi c Par amet er s [_____]

SECTI ON 26 28 01. 00 10 Page 9

Other [_____]

1. 7 EXTRA MATERI ALS

The f ol l owi ng spar e f uses or spar e f use el ement s shal l be del i ver ed t o t he Cont r act i ng of f i cer when t he el ect r i cal syst em i s accept ed:

FUSE TYPE/ CLASS VOLTAGE CURRENT NO. OF SPARES

PART 2 PRODUCTS

NOTE: Sel ect t ypes t o sui t pr oj ect condi t i ons and del et e al l ot her s. Del et e al l par agr aphs not applicable.

2. 1 STANDARD PRODUCT

Pr ovi de pr ot ect i ve devi ces and equi pment whi ch ar e t he st andar d pr oduct of a manuf act ur er r egul ar l y engaged i n t he manuf act ur e of t he pr oduct and t hat essent i al l y dupl i cat e i t ems t hat have been i n sat i sf act or y ut i l i t y t ype use f or at l east t wo year s pr i or t o bi d openi ng. Submi t dat a consi st i ng of manuf act ur er ' s t i me- cur r ent char act er i st i c cur ves f or i ndi v i dual pr ot ect i ve devi ces, r ecommended set t i ngs of adj ust abl e pr ot ect i ve devi ces, and r ecommended r at i ngs of non- adj ust abl e pr ot ect i ve devi ces.

2. 2 NAMEPLATES

Pr ovi de namepl at es t o i dent i f y al l pr ot ect i ve devi ces and equi pment .

Namepl at e i nf or mat i on shal l be i n accor dance wi t h UL 489.

2. 3 CORROSI ON PROTECTI ON

Met al l i c mat er i al s shal l be pr ot ect ed agai nst cor r osi on. Fer r ous met al har dwar e shal l be z i nc or chr ome- pl at ed.

2. 4 MOTOR CONTROLS AND MOTOR CONTROL CENTERS

Mot or cont r ol s and mot or cont r ol cent er s shal l be i n accor dance wi t h NEMA I CS 1, NEMA I CS 2, NEMA I CS 3 and NEMA I CS 6, and UL 508and UL 845.

2. 4. 1 Mot or St ar t er s

Pr ovi de combi nat i on st ar t er s wi t h [ c i r cui t br eaker s] [ and] [ f usi bl e swi t ches] [ and] [ swi t ches equi pped wi t h hi gh- i nt er r upt i ng- capaci t y cur r ent - l i mi t i ng f uses] [ as i ndi cat ed] .

2. 4. 2 Reduced- Vol t age St ar t er s

NOTE: Reduced vol t age st ar t er s wi l l be r equi r ed when t he l ocked r ot or cur r ent of mot or s exceeds t he

SECTI ON 26 28 01. 00 10 Page 10 f ul l - l oad r at i ng of suppl y t r ansf or mer s or suppl y conductors.

Pr ovi de r educed- vol t age st ar t er s f or pol yphase mot or s [ _____] kW hp or l ar ger , of t he s i ngl e- st ep aut ot r ansf or mer , r eact or , or r esi st or t ype havi ng an adj ust abl e t i me i nt er val bet ween appl i cat i on of r educed and f ul l vol t ages t o t he mot or s. Wye- del t a r educed vol t age st ar t er or par t wi ndi ng i ncr ement st ar t er s havi ng an adj ust abl e t i me del ay bet ween appl i cat i on of vol t age t o f i r st and second wi ndi ng of mot or , may be used i n l i eu of t he r educed vol t age st ar t er s speci f i ed above f or st ar t i ng of mot or - gener at or set s, cent r i f ugal l y oper at ed equi pment or r eci pr ocat i ng compr essor s pr ovi ded wi t h aut omat i c unl oader s.

2. 4. 3 Ther mal - Over l oad Pr ot ect i on

Each mot or of 93 W 1/ 8 hp or l ar ger shal l be pr ovi ded wi t h t her mal - over l oad pr ot ect i on. Pol yphase mot or s shal l have over l oad pr ot ect i on i n each ungr ounded conduct or . The over l oad- pr ot ect i on devi ce shal l be pr ovi ded ei t her i nt egr al wi t h t he mot or or cont r ol l er , or shal l be mount ed i n a separ at e encl osur e. Unl ess ot her wi se speci f i ed, t he pr ot ect i ve devi ce shal l be of t he manual l y r eset t ype. Si ngl e or doubl e pol e t umbl er swi t ches speci f i cal l y desi gned f or al t er nat i ng- cur r ent oper at i on onl y may be used as manual cont r ol l er s f or s i ngl e- phase mot or s havi ng a cur r ent r at i ng not i n excess of 80 per cent of t he swi t ch r at i ng.

2. 4. 4 Low- Vol t age Mot or Over l oad Rel ays

NOTE: I n most cases, t her mal r el ays wi l l be speci f i ed. St andar d, s l ow, and qui ck- act i ng t r i p uni t s ar e avai l abl e. Magnet i c r el ays ar e used t o pr ot ect l ow- vol t age mot or s wi t h l ong st ar t i ng t i mes or unusual dut y cycl es.

2. 4. 4. 1 General

[ Ther mal ] [ and] [ magnet i c cur r ent ] over l oad r el ays shal l conf or m t o NEMA I CS 2 and UL 508. Over l oad pr ot ect i on shal l be pr ovi ded ei t her i nt egr al wi t h t he mot or or cont r ol l er , and shal l be r at ed i n accor dance wi t h t he r equi r ement s of NFPA 70. [ St andar d uni t s shal l be used f or mot or st ar t i ng t i mes up t o 7 second. ] [ Sl ow uni t s shal l be used f or mot or st ar t i ng t i mes f r om 8 t o 12 seconds. ] [ Qui ck t r i p uni t s shal l be used on her met i cal l y seal ed, submer si bl e pumps, and si mi l ar mot or s. ]

2. 4. 4. 2 Construction

Manual r eset t ype t her mal r el ays shal l be [ mel t i ng al l oy] [ bi met al l i c ] const r uct i on. Aut omat i c r eset t ype r el ays shal l be bi met al l i c const r uct i on. Magnet i c cur r ent r el ays shal l consi st of a cont act mechani sm and a dash pot mount ed on a common f r ame.

2. 4. 4. 3 Ratings

Vol t age r at i ngs shal l be not l ess t han t he appl i cabl e c i r cui t vol t age.

Tr i p cur r ent r at i ngs shal l be est abl i shed by sel ect i on of t he r epl aceabl e over l oad devi ce and shal l not be adj ust abl e. Wher e t he cont r ol l er i s r emot el y- l ocat ed or di f f i cul t t o r each, an aut omat i c r eset , non- compensat ed

SECTI ON 26 28 01. 00 10 Page 11 over l oad r el ay shal l be pr ovi ded. Manual r eset over l oad r el ays shal l be pr ovi ded ot her wi se, and at al l l ocat i ons wher e aut omat i c st ar t i ng i s pr ovi ded. Wher e t he mot or i s l ocat ed i n a const ant ambi ent t emper at ur e, and t he t her mal devi ce i s l ocat ed i n an ambi ent t emper at ur e t hat r egul ar l y var i es by mor e t han mi nus 10 degr ees C 14 degr ees F, an ambi ent t emper at ur e- compensat ed over l oad r el ay shal l be pr ovi ded.

2. 4. 5 Aut omat i c Cont r ol Devi ces

2. 4. 5. 1 Di r ect Cont r ol

Aut omat i c cont r ol devi ces ( such as t her most at s, f l oat or pr essur e swi t ches) whi ch cont r ol t he st ar t i ng and st oppi ng of mot or s di r ect l y shal l be desi gned f or t hat pur pose and have an adequat e k i l owat t hor sepower r at i ng.

2. 4. 5. 2 Pi l ot - Rel ay Cont r ol

Wher e t he aut omat i c- cont r ol devi ce does not have such a r at i ng, a magnet i c st ar t er shal l be used, wi t h t he aut omat i c- cont r ol devi ce act uat i ng t he pi l ot - cont r ol c i r cui t .

2. 4. 5. 3 Manual / Aut omat i c Sel ect i on

a. Wher e combi nat i on manual and aut omat i c cont r ol i s speci f i ed and t he aut omat i c- cont r ol devi ce act uat es t he pi l ot cont r ol c i r cui t of a magnet i c st ar t er , t he magnet i c st ar t er shal l be pr ovi ded wi t h a t hr ee- posi t i on sel ect or swi t ch mar ked MANUAL- OFF- AUTOMATI C.

b. Connect i ons t o t he sel ect or swi t ch shal l onl y al l ow t he nor mal aut omat i c r egul at or y cont r ol devi ces t o be bypassed when t he swi t ch i s i n t he Manual posi t i on; al l saf et y cont r ol devi ces, such as l ow- or hi gh- pr essur e cut out s, hi gh- t emper at ur e cut out s, and mot or - over l oad pr ot ect i ve devi ces, shal l be connect ed i n t he mot or - cont r ol c i r cui t i n bot h t he Manual and t he Aut omat i c posi t i ons of t he sel ect or swi t ch.

Cont r ol c i r cui t connect i ons t o any MANUAL- OFF- AUTOMATI C swi t ch or t o mor e t han one aut omat i c r egul at or y cont r ol devi ce shal l be made i n accor dance wi t h wi r i ng di agr am appr oved by t he cont r act i ng Of f i cer unl ess such di agr am i s i ncl uded on t he dr awi ngs. Al l cont r ol s shal l be 120 vol t s or l ess unl ess ot her wi se i ndi cat ed.

2. 4. 6 Mot or Cont r ol Cent er s

Cont r ol cent er s shal l be i ndoor t ype and shal l cont ai n combi nat i on st ar t er s and ot her equi pment as i ndi cat ed. Cont r ol cent er s shal l be NEMA I CS 2, Cl ass [ _____] , Type [ _____] . Each cont r ol cent er shal l be mount ed on f l oor s i l l s or mount i ng channel s. Each ci r cui t shal l have a sui t abl e met al or l ami nat ed pl ast i c namepl at e wi t h whi t e cut l et t er s. Mot or cont r ol cent er s shal l be pr ovi ded wi t h a f ul l - l engt h gr ound bus bar .

2. 5 LOW- VOLTAGE FUSES

2. 5. 1 General

Low- vol t age f uses shal l conf or m t o NEMA FU 1. Ti me del ay and nont i me del ay opt i ons shal l be as [ shown] [ speci f i ed] . Equi pment pr ovi ded under t hi s cont r act shal l be pr ovi ded wi t h a compl et e set of pr oper l y r at ed f uses when t he equi pment manuf act ur er ut i l i zes f uses i n t he manuf act ur e of t he equi pment , or i f cur r ent - l i mi t i ng f uses ar e r equi r ed t o be i nst al l ed t o l i mi t t he amper e- i nt er r upt i ng capaci t y of c i r cui t br eaker s or equi pment t o

SECTI ON 26 28 01. 00 10 Page 12 l ess t han t he maxi mum avai l abl e f aul t cur r ent at t he l ocat i on of t he equi pment t o be i nst al l ed. Fuses shal l have a vol t age r at i ng of not l ess t han t he phase- t o- phase ci r cui t vol t age, and shal l have t he t i me- cur r ent char act er i st i cs r equi r es f or ef f ect i ve power syst em coor di nat i on.

2. 5. 2 Car t r i dge Fuses; Noncur r ent - Li mi t i ng Type

Car t r i dge f uses of t he noncur r ent - l i mi t i ng t ype shal l be Cl ass H, nonr enewabl e, dual el ement , t i me l ag t ype and shal l have i nt er r upt i ng capaci t y of 10, 000 amper es. Cl ass H Fuses shal l conf or m t o UL 198M. At 500 per cent cur r ent , car t r i dge f uses shal l not bl ow i n l ess t han 10 seconds. Car t r i dge f uses shal l be used f or c i r cui t s r at ed i n excess of 30 amper es, 125 vol t s, except wher e cur r ent - l i mi t i ng f uses ar e i ndi cat ed.

2. 5. 3 Car t r i dge Fuses; Cur r ent - Li mi t i ng Type

NOTE: Cl ass RKI pr ovi des hi gh cur r ent l i mi t at i on wi t h bot h t i me- del ay and nont i me- del ay. RK5 pr ovi des moder at e cur r ent l i mi t at i on, t i me- del ay option.

Car t r i dge f uses, cur r ent - l i mi t i ng t ype, Cl ass [ G] [ J] [ K] [ L] [ RK1] [ RK5] [ RK9] [ T] [ CC] shal l have t est ed i nt er r upt i ng capaci t y not l ess t han [ 100, 000] [ 200, 000] amper es. Fuse hol der s shal l be t he t ype t hat wi l l r ej ect Cl ass H f uses.

a. Cl ass [ G] [ J ] [ L] [ CC] f uses shal l conf or m t o UL 198M.

b. Cl ass K f uses shal l conf or m t o UL 198M.

c. Cl ass R f uses shal l conf or m t o UL 198M.

d. Cl ass T f uses shal l conf or m t o UL 198M.

2. 5. 3. 1 Cont i nuous Cur r ent Rat i ngs ( 600 amper es and smal l er )

NOTE: Cl ass J or RK1 pr ovi de best pr ot ect i on f or ser vi ces and f eeder s r at ed 600 amper es or l ess.

Cl ass RK5 may be mor e cost ef f ect i ve wher e t he gr eat er cur r ent l i mi t at i on of RK1 or J i s not a requirement.

Ser vi ce ent r ance and f eeder c i r cui t f uses ( 600 amper es and smal l er ) shal l be Cl ass [ RK1] [ RK5] [ J] , cur r ent - l i mi t i ng, [ nont i me- del ay] [ t i me- del ay] wi t h 200, 000 amper es i nt er r upt i ng capaci t y.

2. 5. 3. 2 Cont i nuous Cur r ent Rat i ngs ( gr eat er t han 600 amper es)

Ser vi ce ent r ance and f eeder c i r cui t f uses ( gr eat er t han 600 amper es) shal l be Cl ass L, cur r ent - l i mi t i ng, [ nont i me- del ay] [ t i me- del ay] wi t h 200, 000 amper es i nt er r upt i ng capaci t y.

2. 5. 3. 3 Mot or and Tr ansf or mer Ci r cui t Fuses

Mot or , mot or cont r ol l er , t r ansf or mer , and i nduct i ve c i r cui t f uses shal l be

SECTI ON 26 28 01. 00 10 Page 13

Cl ass RK1 or RK5, cur r ent - l i mi t i ng, t i me- del ay wi t h 200, 000 amper es i nt er r upt i ng capaci t y.

2. 6 MEDI UM- VOLTAGE AND HI GH- VOLTAGE FUSES

2. 6. 1 General

Medi um- vol t age and hi gh- vol t age f uses shal l be di st r i but i on f use cut out s or power f uses, E- r at ed, C- r at ed, or R- r at ed cur r ent - l i mi t i ng f uses as shown.

2. 6. 2 Construction

Uni t s shal l be sui t abl e f or [ out door ] [ i ndoor ] use. Fuses shal l have i nt egr al bl own- f use i ndi cat or s. Al l r at i ngs shal l be c l ear l y v i s i bl e.

2. 6. 3 Ratings

NOTE: Sel ect f use r at i ngs t o sui t pr oj ect condi t i ons and del et e al l ot her s.

Vol t age r at i ngs shal l be not l ess t han t he appl i cabl e c i r cui t vol t age.

Cont i nuous- cur r ent r at i ngs shal l be as shown.

2. 6. 3. 1 Fuse Cut out s

Medi um- vol t age f uses and cut out s shal l be of t he [ l oadbr eak] [ nonl oadbr eak] [ encl osed] [ open] t ype const r uct i on[ r at ed [ 5. 2] [ 7. 8] [ 15] [ 27] [ 28] kV and of t he [ nor mal ] [ heavy] [ ext r a- heavy] [ ul t r a- heavy] - dut y t ype] [ r at i ngs and t ypes i ndi cat ed] . Open- l i nk cut out s ar e not accept abl e. Fuses shal l be ei t her i ndi cat i ng or dr opout t ype. Fuse r at i ngs shal l be as i ndi cat ed.

Fuses cut out s shal l be equi pped wi t h mount i ng br acket s sui t abl e f or t he i ndi cat ed i nst al l at i ons.

2. 6. 3. 2 Power Fuses

[ Expul s i on- t ype] [ Cur r ent - l i mi t i ng] power f uses shal l have r at i ngs i n accor dance wi t h I EEE C37. 46 and as f ol l ows:

Nomi nal vol t age [_____]

Rat ed maxi mum vol t age [_____]

Maxi mum symmet r i cal i nt er r upt i ng capaci t y [_____]

Rat ed cont i nuous cur r ent [_____]

BIL [_____]

2. 6. 3. 3 E- Rat ed, Cur r ent - Li mi t i ng Power Fuses

E- r at ed, cur r ent - l i mi t i ng, power f uses shal l conf or m t o I EEE C37. 46.

2. 6. 3. 4 C- Rat ed, Cur r ent - Li mi t i ng Fuses

C- r at ed, cur r ent - l i mi t i ng, power f uses shal l open i n 1000 seconds at

SECTI ON 26 28 01. 00 10 Page 14 cur r ent s bet ween 170 and 240 per cent of t he C r at i ng.

2. 6. 3. 5 R- Rat ed, Cur r ent - Li mi t i ng Fuses

R- r at ed, cur r ent - l i mi t i ng, f uses shal l be used wi t h medi um- vol t age mot or cont r ol l er s onl y. R- r at ed f uses shal l conf or m t o I EEE C37. 46.

2. 7 MOTOR SHORT- CI RCUI T PROTECTOR ( MSCP)

NOTE: MSCPs ar e component s of mot or cont r ol l er s r at her t han f uses. MSCPs, t her ef or e, have no amper e r at i ngs and ar e i dent i f i ed by l et t er desi gnat i ons, A- Y. Due t o a l i mi t ed number of MSCP manuf act ur er s, MSCPs shoul d be used onl y as a sol e- sour ce i t em.

2. 7. 1 General

Mot or shor t - c i r cui t pr ot ect or s shal l conf or m t o UL 508 and shal l be pr ovi ded as shown. Pr ot ect or s shal l be used onl y as par t of a combi nat i on mot or cont r ol l er whi ch pr ovi des coor di nat ed mot or br anch- ci r cui t over l oad and shor t - c i r cui t pr ot ect i on, and shal l be r at ed i n accor dance wi t h t he r equi r ement s of NFPA 70.

2. 7. 2 Construction

Mot or shor t - c i r cui t pr ot ect or bodi es shal l be const r uct ed of hi gh t emper at ur e, di mensi onal l y st abl e, l ong l i f e, nonhygr oscopi c mat er i al s.

Pr ot ect or s shal l f i t speci al MSCP mount i ng c l i ps and shal l not be i nt er changeabl e wi t h any commer ci al l y avai l abl e f uses. Pr ot ect or s shal l have 100 per cent one- way i nt er changeabi l i t y wi t hi n t he A- Y l et t er desi gnat i ons. Al l r at i ngs shal l be c l ear l y v i s i bl e.

2. 7. 3 Ratings

Vol t age r at i ngs shal l be not l ess t han t he appl i cabl e c i r cui t vol t age.

Let t er desi gnat i ons shal l be A t hr ough Y f or mot or cont r ol l er Si zes 0, 1, 2, 3, 4, and 5, wi t h 100, 000 amper es i nt er r upt i ng capaci t y r at i ng. Let t er desi gnat i ons shal l cor r espond t o cont r ol l er s i zes as f ol l ows:

CONTROLLER SI ZE MSCP DESI GNATI ON

NEMA 0 A-N

NEMA 1 A-P

NEMA 2 A-S

NEMA 3 A-U

NEMA 4 A-W

NEMA 5 A-Y

SECTI ON 26 28 01. 00 10 Page 15

2. 8 MOLDED- CASE CI RCUI T BREAKERS

2. 8. 1 General

Mol ded- case ci r cui t br eaker s shal l conf or m t o UL 489 and UL 489. Ci r cui t br eaker s may be i nst al l ed i n panel boar ds, swi t chboar ds, encl osur es, mot or cont r ol cent er s, or combi nat i on mot or cont r ol l er s. Ci r cui t br eaker s and ci r cui t br eaker encl osur es l ocat ed i n hazar dous ( c l assi f i ed) ar eas shal l conf or m t o UL 1203.

2. 8. 2 Construction

Mol ded- case ci r cui t br eaker s shal l be assembl ed as an i nt egr al uni t i n a suppor t i ng and encl osi ng housi ng of gl ass r ei nf or ced i nsul at i ng mat er i al pr ovi di ng hi gh di el ect r i c st r engt h. Ci r cui t br eaker s shal l be sui t abl e f or mount i ng and oper at i ng i n any posi t i on. Lugs shal l be l i s t ed f or [ copper conduct or s onl y] [ copper and al umi num conduct or s] i n accor dance wi t h UL 486E.

Si ngl e- pol e c i r cui t br eaker s shal l be f ul l modul e s i ze wi t h not mor e t han one pol e per modul e. Mul t i - pol e c i r cui t br eaker s shal l be of t he common- t r i p t ype havi ng a s i ngl e oper at i ng handl e such t hat an over l oad or shor t c i r cui t on any one pol e wi l l r esul t i n al l pol es openi ng s i mul t aneousl y. Si zes of 100 amper es or l ess may consi st of s i ngl e- pol e br eaker s per manent l y f act or y assembl ed i nt o a mul t i - pol e uni t havi ng an i nt er nal , mechani cal , nont amper abl e common- t r i p mechani sm and ext er nal handl e t i es. Al l c i r cui t br eaker s shal l have a qui ck- make, qui ck- br eak over cent er t oggl e- t ype mechani sm, and t he handl e mechani sm shal l be t r i p- f r ee t o pr event hol di ng t he cont act s c l osed agai nst a shor t - c i r cui t or sust ai ned over l oad. Al l c i r cui t br eaker handl es shal l assume a posi t i on bet ween " ON" and " OFF" when t r i pped aut omat i cal l y . Al l r at i ngs shal l be c l ear l y v i s i bl e.

2. 8. 3 Ratings

Vol t age r at i ngs shal l be not l ess t han t he appl i cabl e c i r cui t vol t age. The i nt er r upt i ng r at i ng of t he c i r cui t br eaker s shal l be at l east equal t o t he avai l abl e shor t - c i r cui t cur r ent at t he l i ne t er mi nal s of t he c i r cui t br eaker and cor r espond t o t he UL l i s t ed i nt egr at ed shor t - c i r cui t cur r ent r at i ng speci f i ed f or t he panel boar ds and swi t chboar ds. Mol ded- case ci r cui t br eaker s shal l have nomi nal vol t age r at i ngs, maxi mum cont i nuous- cur r ent r at i ngs, and maxi mum shor t - c i r cui t i nt er r upt i ng r at i ngs i n accor dance wi t h UL 489. Rat i ngs shal l be coor di nat ed wi t h syst em X/ R r at i o.

2. 8. 4 Cascade Syst em Rat i ngs

Ci r cui t br eaker s used i n ser i es combi nat i ons shal l be i n accor dance wi t h UL 489. Equi pment , such as swi t chboar ds and panel boar ds, whi ch house ser i es- connect ed c i r cui t br eaker s shal l be c l ear l y mar ked accor di ngl y.

Ser i es combi nat i ons shal l be l i s t ed i n t he UL Recogni zed Component Di r ect or y under " Ci r cui t Br eaker s- Ser i es Connect ed. "

2. 8. 5 Ther mal - Magnet i c Tr i p El ement s

Ther mal magnet i c c i r cui t br eaker s shal l be pr ovi ded as shown. Aut omat i c oper at i on shal l be obt ai ned by means of t her mal - magnet i c t r i ppi ng devi ces l ocat ed i n each pol e pr ovi di ng i nver se t i me del ay and i nst ant aneous c i r cui t pr ot ect i on. The i nst ant aneous magnet i c t r i p shal l be adj ust abl e and accessi bl e f r om t he f r ont of al l c i r cui t br eaker s on f r ame si zes above [ 150] [ _____] amper es.

SECTI ON 26 28 01. 00 10 Page 16

2. 8. 6 Sol i d- St at e Tr i p El ement s

Sol i d- st at e c i r cui t br eaker s shal l be pr ovi ded as shown. Al l el ect r oni cs shal l be sel f - cont ai ned and r equi r e no ext er nal r el ayi ng, power suppl y, or accessor i es. Pr i nt ed c i r cui t car ds shal l be t r eat ed t o r esi st moi st ur e absor pt i on, f ungus gr owt h, and si gnal l eakage. Al l el ect r oni cs shal l be housed i n an encl osur e whi ch pr ovi des pr ot ect i on agai nst ar cs, magnet i c i nt er f er ence, dust , and ot her cont ami nant s. Sol i d- st at e sensi ng shal l measur e t r ue RMS cur r ent wi t h er r or l ess t han one per cent on syst ems wi t h di st or t i ons t hr ough t he 13t h har moni c. Peak or aver age act uat i ng devi ces ar e not accept abl e. Cur r ent sensor s shal l be t or oi dal const r uct i on, encased i n a pl ast i c housi ng f i l l ed wi t h epoxy t o pr ot ect agai nst damage and moi st ur e and shal l be i nt egr al l y mount ed on t he br eaker . Wher e i ndi cat ed on t he dr awi ngs, c i r cui t br eaker f r ames shal l be r at ed f or 100 per cent cont i nuous dut y. Ci r cui t br eaker s shal l have t r i ppi ng f eat ur es as shown on t he dr awi ngs and as descr i bed bel ow:

a. Long- t i me cur r ent pi ck- up, adj ust abl e f r om 50 per cent t o 100 per cent of cont i nuous cur r ent r at i ng.

b. [ Fi xed] [ Adj ust abl e] l ong- t i me del ay.

c. Shor t - t i me cur r ent pi ck- up, adj ust abl e f r om 1. 5 t o 9 t i mes l ong- t i me cur r ent set t i ng.

d. [ Fi xed] [ Adj ust abl e] shor t - t i me del ay.

e. [ Shor t - t i me I squar e t i mes t swi t ch. ] f . I nst ant aneous cur r ent pi ck- up, adj ust abl e f r om 1. 5 t o 9 t i mes l ong- t i me cur r ent set t i ng.

g. Gr ound- f aul t pi ck- up, adj ust abl e f r om 20 per cent t o 60 per cent of sensor r at i ng, but i n no case gr eat er t han 1200 amper es. Sensi ng of gr ound- f aul t cur r ent at t he mai n bondi ng j umper or gr ound st r ap shal l not be per mi t t ed. [ Zone- sel ect i ve i nt er l ocki ng shal l be pr ovi ded as shown.]

h. [ Fi xed] [ Adj ust abl e] gr ound- f aul t del ay.

i . [ Gr ound- f aul t I squar e t i mes t swi t ch. ] j . [ Over l oad] [ and] [ Shor t - c i r cui t ] [ and] [ Gr ound- f aul t ] t r i p i ndi cat or s shal l be pr ovi ded.

2. 8. 7 Cur r ent - Li mi t i ng Ci r cui t Br eaker s

Cur r ent - l i mi t i ng c i r cui t br eaker s shal l be pr ovi ded as shown.

Cur r ent - l i mi t i ng c i r cui t br eaker s shal l l i mi t t he l et - t hr ough I squar e t i mes t t o a val ue l ess t han t he I squar e t i mes t of one- hal f cycl e of t he symmet r i cal shor t - c i r cui t cur r ent wavef or m. On f aul t cur r ent s bel ow t he t hr eshol d of l i mi t at i on, br eaker s shal l pr ovi de convent i onal over l oad and shor t - c i r cui t pr ot ect i on. I nt egr al l y- f used ci r cui t br eaker s shal l not be used.

2. 8. 8 SWD Ci r cui t Br eaker s

Ci r cui t br eaker s r at ed 15 amper es or 20 amper es and i nt ended t o swi t ch 277 vol t s or l ess f l uor escent l i ght i ng l oads shal l be mar ked " SWD. "

SECTI ON 26 28 01. 00 10 Page 17

2. 8. 9 HACR Ci r cui t Br eaker s

Ci r cui t br eaker s 60 amper es or bel ow, 240 vol t s, 1- pol e or 2- pol e, i nt ended t o pr ot ect mul t i - mot or and combi nat i on- l oad i nst al l at i ons i nvol ved i n heat i ng, ai r condi t i oni ng, and r ef r i ger at i ng equi pment shal l be mar ked " Li st ed HACR Type. "

2. 8. 10 Mot or Ci r cui t Pr ot ect or s ( MCP)

NOTE: A mot or c i r cui t pr ot ect or ( MCP) i s def i ned as an adj ust abl e, i nst ant aneous t r i p c i r cui t br eaker used i n conj unct i on wi t h a combi nat i on mot or cont r ol l er havi ng over l oad pr ot ect i on.

Mot or c i r cui t pr ot ect or s shal l conf or m t o UL 489 and UL 489 and shal l be pr ovi ded as shown. MCPs shal l consi st of an adj ust abl e i nst ant aneous t r i p c i r cui t br eaker i n conj unct i on wi t h a combi nat i on mot or cont r ol l er whi ch pr ovi des coor di nat ed mot or c i r cui t over l oad and shor t - c i r cui t pr ot ect i on.

Mot or Ci r cui t Pr ot ect or s shal l be r at ed i n accor dance wi t h NFPA 70.

2. 9 LOW- VOLTAGE POWER CI RCUI T BREAKERS

2. 9. 1 Construction

Low- vol t age power c i r cui t br eaker s shal l conf or m t o I EEE C37. 13 and I EEE C37. 16 and shal l be t hr ee- pol e, s i ngl e- t hr ow, st or ed ener gy, [ manual l y] [ el ect r i cal l y ] oper at ed, wi t h dr awout mount i ng. Sol i d- st at e t r i p el ement s whi ch r equi r e no ext er nal power connect i ons shal l be pr ovi ded.

Ci r cui t br eaker s shal l have an open/ cl ose cont act posi t i on i ndi cat or , char ged/ di schar ged st or ed ener gy i ndi cat or , pr i mar y di sconnect devi ces, and a mechani cal i nt er l ock t o pr event maki ng or br eaki ng cont act of t he pr i mar y di sconnect s when t he c i r cui t br eaker i s c l osed. Cont r ol vol t age shal l be [ 24 V dc] [ 48 V dc] [ 120 V ac] [ as i ndi cat ed. ] The c i r cui t br eaker encl osur e shal l be sui t abl e f or i t s i nt ended l ocat i on.

2. 9. 2 Ratings

Vol t age r at i ngs shal l be not l ess t han t he appl i cabl e c i r cui t vol t age.

Ci r cui t br eaker s shal l be r at ed f or 100 per cent cont i nuous dut y and shal l have t r i p cur r ent r at i ngs and f r ame si zes as shown. Nomi nal vol t age r at i ngs, maxi mum cont i nuous- cur r ent r at i ngs, and maxi mum shor t - c i r cui t i nt er r upt i ng r at i ngs shal l be i n accor dance wi t h I EEE C37. 16. Tr i ppi ng f eat ur es shal l be as f ol l ows:

a. Long- t i me cur r ent pi ck- up, adj ust abl e f r om 50 per cent t o 100 per cent of sensor cur r ent r at i ng.

b. Adj ust abl e l ong- t i me del ay.

c. Shor t - t i me cur r ent pi ck- up, adj ust abl e f r om 1. 5 t o 9 t i mes l ong- t i me cur r ent set t i ng.

d. Adj ust abl e shor t - t i me del ay.

[ e. Shor t - t i me I squar e t i mes t swi t ch. ]

SECTI ON 26 28 01. 00 10 Page 18 f . I nst ant aneous cur r ent pi ck- up, adj ust abl e f r om 1. 5 t o 9 t i mes l ong- t i me cur r ent set t i ng.

g. Gr ound- f aul t pi ck- up, adj ust abl e f r om 20 per cent t o 60 per cent of sensor r at i ng, but i n no case gr eat er t han 1200 amper es. Sensi ng of gr ound- f aul t cur r ent at t he mai n bondi ng j umper or gr ound st r ap shal l not be per mi t t ed. [ Zone- sel ect i ve i nt er l ocki ng shal l be pr ovi ded as shown.]

h. [ Fi xed] [ Adj ust abl e] gr ound- f aul t del ay.

i . [ Gr ound- f aul t I squar e t i mes t swi t ch. ] j . [ Over l oad] [ and] [ Shor t - c i r cui t ] [ and] [ Gr ound- f aul t ] t r i p i ndi cat or s shal l be pr ovi ded.

2. 10 MEDI UM- VOLTAGE CI RCUI T BREAKERS/ I NTERRUPTERS

2. 10. 1 Met al - Encl osed Type

Ci r cui t br eaker s shal l be of t he dr awout t ype, i n accor dance wi t h

I EEE C37. 20. 1.

2. 10. 2 Met al - Cl ad Type

Ci r cui t br eaker s shal l compl y wi t h I EEE C37. 04 and shal l consi st of i t ems l i s t ed f or such uni t s i n NEMA SG 6.

2. 10. 3 SF6 I nt er r upt er s

SF6 i nt er r upt er s shal l be of t he puf f er t ype wher e t he movement of t he cont act pl unger wi l l i ni t i at e t he puf f of SF6 gas acr oss t he cont act t o ext i ngui sh t he ar c at zer o gauge t ank pr essur e ( at mospher i c pr essur e) . The puf f of SF6 must be suf f i c i ent t o c l ear an ar c f or [ 15 kV] [ _____] or l ower c l ass equi pment and r emai n oper at i onal wi t hout damage or r equi r i ng mai nt enance or r epai r except f or gas l eaks. Br eaker s shal l be pr ovi ded wi t h a l oss- of - pr essur e al ar m r emot e as shown on t he dr awi ngs. Bef or e t he pr essur e i n t he cont ai ner dr ops bel ow t he poi nt wher e t he br eaker or swi t ch cannot open saf el y wi t hout damage, t he br eaker shal l act i vat e t he l oss- of - pr essur e al ar m, open aut omat i cal l y , and r emai n i n t he l ocked open posi t i on unt i l r epai r ed. I f l ocat ed i nsi de a st r uct ur e, br eaker s shal l be l ocat ed i n a c l osed r oom wi t h access onl y f r om out si de, and pr ovi ded wi t h di r ect out door vent i l at i on and a sensor uni t whi ch act i vat es a vent f an and an al ar m when a SF6 l eak had occur r ed. The al ar m wi l l aut omat i cal l y be s i l enced when t he oxygen i n t he r oom i s above 19. 5 per cent . The SF6 shal l meet t he r equi r ement s of ASTM D2472, except t hat t he maxi mum dew poi nt shal l be mi nus 60 degr ees C 140 degr ees F ( cor r espondi ng t o 11 ppm wat er by vol ume) , wi t h onl y 11 ppm wat er by vol ume, and t he mi ni mum pur i t y shal l be

99. 9 per cent by wei ght . Ci r cui t br eaker s shal l have pr ovi s i ons f or mai nt enance sl ow cl osi ng of cont act s and have a r eadi l y accessi bl e cont act wear i ndi cat or . Tr i ppi ng t i me shal l not exceed f i ve cycl es.

2. 10. 4 Vacuum I nt er r upt er s

Vacuum i nt er r upt er s shal l be her met i cal l y- seal ed i n a hi gh vacuum t o pr ot ect cont act f r om moi st ur e and cont ami nat i on. Ci r cui t br eaker s shal l have pr ovi s i ons f or s l ow cl osi ng of cont act s and have a r eadi l y cont act wear i ndi cat or . Tr i ppi ng t i me shal l not exceed f i ve cycl es.

SECTI ON 26 28 01. 00 10 Page 19

2. 10. 5 Ratings

NOTE: I EEE C37. 06, Tabl e 2 l i s t s pr ef er r ed r at i ngs f or i ndoor oi l l ess c i r cui t br eaker s. A shor t - c i r cui t st udy i s r equi r ed t o speci f y r at i ngs.

Mai n buses shal l be t hr ee- phase [ t hr ee- wi r e] [ f our - wi r e] wi t h a cont i nuous cur r ent r at i ng of [ _____] amper es r ms. [ The neut r al bus shal l be r at ed f or [ _____] amper es, cont i nuous. ] Swi t chgear r at i ngs at 60 Hz shal l be i n accor dance wi t h I EEE C37. 06 and as f ol l ows:

Maxi mum vol t age [_____]

Nomi nal vol t age cl ass [_____]

BIL [_____]

Maxi mum symmet r i cal i nt er r upt i ng capaci t y [_____]

3- second shor t - t i me- cur r ent car r yi ng capacity

Rat ed cont i nuous cur r ent [ as i ndi cat ed] [ _____]

2. 11 OI L CI RCUI T BREAKERS FOR SUBSTATI ONS

NOTE: I EEE C37. 06 l i s t s st andar d r at i ngs. A shor t - c i r cui t st udy i s r equi r ed t o speci f y r at i ngs.

Oi l c i r cui t br eaker s shal l compl y wi t h I EEE C37. 04 and NEMA SG 4and shal l be of t he out door t hr ee- pol e t ype, wi t h s i ngl e or mul t i pl e t anks and f r ame- mount ed or f l oor - mount ed on a common base i n accor dance wi t h t he manuf act ur er ' s st andar d desi gn. Cont r ol vol t age shal l be [ 48] [ 125] vol t s

dc. Rat i ngs shal l be as f ol l ows:

Nomi nal vol t age [_____]

Rat ed maxi mum vol t age [_____]

Maxi mum symmet r i cal i nt er r upt i ng capaci t y [_____]

Maxi mum asymmet r i cal i nt er r upt i ng capaci t y [_____]

3- second shor t t i me cur r ent car r yi ng capaci t y [_____]

Cl ose and l at ch capaci t y [_____]

Rat ed cont i nuous cur r ent [_____]

SECTI ON 26 28 01. 00 10 Page 20

Maxi mum i nt er r upt i ng t i me [_____]

Per mi ssi bl e t r i ppi ng del ay [_____]

Recl osi ng t i me ( adj ust ment r ange) [_____]

Dut y cycl e at r at ed condi t i ons [_____]

Basi c I nsul at i on Level ( BI L) [_____]

2. 11. 1 I ncomi ng Li ne Ci r cui t Br eaker s f or Subst at i ons

NOTE: Del et e i t ems " e" and " f " i f not r equi r ed.

I ncomi ng l i ne c i r cui t br eaker s shal l be coor di nat ed wi t h t he r equi r ement s of t he ser vi ng ut i l i t y , and of t he pr ot ect ed t r ansf or mer , and shal l i ncl ude t he f ol l owi ng cont r ol and moni t or i ng syst em i t ems t hat shal l be mount ed i n t he i nst r ument and r el ay cabi net .

a. An ammet er and an ammet er swi t ch.

b. A c i r cui t br eaker cont r ol swi t ch f or l ocal and r emot e cont r ol oper at i on.

c. Thr ee over cur r ent r el ays, devi ces 50/ 51.

d. One r esi dual l y- connect ed gr ound- over cur r ent r el ay, devi ce 50/ 51N.

e. Thr ee di r ect i onal over cur r ent r el ays, devi ce 67.

f . One gr ound- di r ect i onal - over cur r ent r el ay, devi ce 67N.

g. Thr ee t r ansf or mer di f f er ent i al r el ays, devi ce 87T and an auxi l i ar y l ockout r el ay, devi ce 86T l ocat ed i n t he [ associ at ed met al - c l ad swi t chgear ] [ i nst r ument and r el ay cabi net ] .

h. [ Si ngl e] [ Thr ee] phase secondar y pot ent i al t est bl ocks wi t h associ at ed t est pl ug, quant i t y as shown.

i . [ Si ngl e] [ Thr ee] phase secondar y cur r ent t est bl ocks wi t h associ at ed t est pl ug f or [ each cur r ent t r ansf or mer c i r cui t ] [ each t hr ee- phase set of cur r ent t r ansf or mer s] , as i ndi cat ed.

2. 11. 2 Li ne Ti e Ci r cui t Br eaker s f or Subst at i ons

NOTE: Del et e ei t her 86B or 87B r el ays i f not required.

The l i ne t i e c i r cui t br eaker shal l be r at ed [ as shown] [ t he same as t he i ncomi ng l i ne uni t s] , and shal l be el ect r i cal l y and mechani cal l y i nt er l ocked wi t h ot her hi gh- vol t age i t ems of equi pment as shown. The l i ne t i e c i r cui t br eaker shal l be equi pped wi t h cont r ol and moni t or i ng syst em i t ems t he same as descr i bed f or t he i ncomi ng l i ne c i r cui t br eaker . The i nst r ument and r el ay cabi net shal l house t he same equi pment l i s t ed f or t he

SECTI ON 26 28 01. 00 10 Page 21 i ncomi ng l i ne c i r cui t br eaker cabi net except [ _____] . The cabi net shal l al so house t hr ee bus di f f er ent i al r el ays, devi ce 87B, and an auxi l i ar y l ockout r el ay, devi ce 86B.

2. 12 SUBSTATI ON AND SWI TCHGEAR PROTECTI VE RELAYS

NOTE: Ranges sel ect ed wi l l be based on t he coor di nat i on st udy. Ref er t o UFC 3- 550- 01 and UFC 3- 520- 01 f or gui dance r egar di ng pr ot ect i ve r el ays.

[ Sol i d- st at e] [ and] [ El ect r omechani cal ] [ and] [ Mi cr opr ocessor - based] pr ot ect i ve r el ays shal l be as shown and shal l be of a t ype speci f i cal l y desi gned f…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .