Solicitation Amendment 2- Revised PWS and Add updated Wage Determination 9 Jan 20 W91151-20-R-0003 Kitchen Hoods.pdf

0011412978

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

1. This amendment is issued to incorporate Part 7 (Technical Exhibits) & Part 8 (Data Deliverables) into the revised Performance Work Statement (PWS).

2. This amendment is issued to incorporated the latest revision of Wage Determination 2015-5238, Revision No.13, dated 12/13/2019.

3. All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 55

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 09-Jan-2020

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W9115120R0003

X 9B. DATED (SEE ITEM 11)

20-Dec-2019

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

09-Jan-2020

CODE

MICC - FORT HOOD

36000 DARNALL LOOP, ROOM 1300B

FORT HOOD TX 76544-5025

W91151 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

beta.SAM.gov Page 2 of 20 https://beta.sam.gov/wage-determination/2015-5238/13/document 1/9/2020

W9115120R0003

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

REVISED WAGE DETERMINATION

LABOR

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5238 Daniel W. Simms Division of | Revision No.: 13 Director Wage Determinations| Date Of Last Revision: 12/23/2019 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2020. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Texas http://www.dol.gov/whd/govcontracts beta.SAM.gov Page 3 of 20

Area: Texas Counties of Bell Coryell

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I 13.67

01012 - Accounting Clerk II 15.34

01013 - Accounting Clerk III 17.17

01020 - Administrative Assistant 22.61

01035 - Court Reporter 15.76

01041 - Customer Service Representative I 11.19

01042 - Customer Service Representative II 12.58

01043 - Customer Service Representative III 13.72

01051 - Data Entry Operator I 12.63

01052 - Data Entry Operator II 13.78

01060 - Dispatcher Motor Vehicle 17.58

01070 - Document Preparation Clerk 14.80

01090 - Duplicating Machine Operator 14.80

01111 - General Clerk I 12.96

01112 - General Clerk II 14.13

01113 - General Clerk III 15.87

01120 - Housing Referral Assistant 17.56

01141 - Messenger Courier 13.17

01191 - Order Clerk I 13.72

01192 - Order Clerk II 14.96

01261 - Personnel Assistant (Employment) I 15.28

01262 - Personnel Assistant (Employment) II 17.10

01263 - Personnel Assistant (Employment) III 19.05

01270 - Production Control Clerk 20.95

01290 - Rental Clerk 11.44

01300 - Scheduler Maintenance 14.09

01311 - Secretary I 14.09

01312 - Secretary II 15.76

01313 - Secretary III 17.56 beta.SAM.gov Page 4 of 20

01320 - Service Order Dispatcher 15.32

01410 - Supply Technician 22.61

01420 - Survey Worker 15.00

01460 - Switchboard Operator/Receptionist 11.73

01531 - Travel Clerk I 11.59

01532 - Travel Clerk II 12.65

01533 - Travel Clerk III 13.72

01611 - Word Processor I 12.55

01612 - Word Processor II 14.09

01613 - Word Processor III 15.76

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer Fiberglass 19.95

05010 - Automotive Electrician 17.94

05040 - Automotive Glass Installer 16.78

05070 - Automotive Worker 16.78

05110 - Mobile Equipment Servicer 14.46

05130 - Motor Equipment Metal Mechanic 19.11

05160 - Motor Equipment Metal Worker 16.78

05190 - Motor Vehicle Mechanic 19.11

05220 - Motor Vehicle Mechanic Helper 13.29

05250 - Motor Vehicle Upholstery Worker 15.61

05280 - Motor Vehicle Wrecker 16.78

05310 - Painter Automotive 17.94

05340 - Radiator Repair Specialist 16.78

05370 - Tire Repairer 13.26

05400 - Transmission Repair Specialist 19.11

07000 - Food Preparation And Service Occupations

07010 - Baker 10.27

07041 - Cook I 10.19

07042 - Cook II 11.84

07070 - Dishwasher 9.24

07130 - Food Service Worker 10.00

07210 - Meat Cutter 17.59

07260 - Waiter/Waitress 8.80

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter 18.87

09040 - Furniture Handler 11.97 beta.SAM.gov Page 5 of 20

09080 - Furniture Refinisher 18.87

09090 - Furniture Refinisher Helper 14.51

09110 - Furniture Repairer Minor 16.72

09130 - Upholsterer 18.87

11000 - General Services And Support Occupations

11030 - Cleaner Vehicles 10.25

11060 - Elevator Operator 10.97

11090 - Gardener 16.69

11122 - Housekeeping Aide 10.97

11150 - Janitor 10.97

11210 - Laborer Grounds Maintenance 12.75

11240 - Maid or Houseman 10.81

11260 - Pruner 11.30

11270 - Tractor Operator 15.46

11330 - Trail Maintenance Worker 12.75

11360 - Window Cleaner 12.38

12000 - Health Occupations

12010 - Ambulance Driver 17.31

12011 - Breath Alcohol Technician 19.42

12012 - Certified Occupational Therapist Assistant 29.08

12015 - Certified Physical Therapist Assistant 34.22

12020 - Dental Assistant 17.77

12025 - Dental Hygienist 35.65

12030 - EKG Technician 25.72

12035 - Electroneurodiagnostic Technologist 25.72

12040 - Emergency Medical Technician 17.31

12071 - Licensed Practical Nurse I 17.35

12072 - Licensed Practical Nurse II 19.42

12073 - Licensed Practical Nurse III 21.64

12100 - Medical Assistant 13.93

12130 - Medical Laboratory Technician 22.54

12160 - Medical Record Clerk 19.48

12190 - Medical Record Technician 21.80

12195 - Medical Transcriptionist 17.86

12210 - Nuclear Medicine Technologist 42.66

12221 - Nursing Assistant I 11.07

12222 - Nursing Assistant II 12.44 beta.SAM.gov Page 6 of 20

12223 - Nursing Assistant III 14.71

12224 - Nursing Assistant IV 16.47

12235 - Optical Dispenser 14.80

12236 - Optical Technician 17.35

12250 - Pharmacy Technician 17.97

12280 - Phlebotomist 14.28

12305 - Radiologic Technologist 27.60

12311 - Registered Nurse I 22.83

12312 - Registered Nurse II 27.92

12313 - Registered Nurse II Specialist 27.92

12314 - Registered Nurse III 33.78

12315 - Registered Nurse III Anesthetist 33.78

12316 - Registered Nurse IV 40.49

12317 - Scheduler (Drug and Alcohol Testing) 24.05

12320 - Substance Abuse Treatment Counselor 18.30

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I 18.91

13012 - Exhibits Specialist II 23.42

13013 - Exhibits Specialist III 28.65

13041 - Illustrator I 18.91

13042 - Illustrator II 23.42

13043 - Illustrator III 28.65

13047 - Librarian 25.94

13050 - Library Aide/Clerk 11.97

13054 - Library Information Technology Systems 23.42

Administrator

13058 - Library Technician

15.66

13061 - Media Specialist I 16.90

13062 - Media Specialist II 18.91

13063 - Media Specialist III 21.07

13071 - Photographer I 16.90

13072 - Photographer II 18.91

13073 - Photographer III 23.42

13074 - Photographer IV 28.65

13075 - Photographer V 34.66

13090 - Technical Order Library Clerk 15.49

13110 - Video Teleconference Technician 17.14 beta.SAM.gov Page 7 of 20

14000 - Information Technology Occupations

14041 - Computer Operator I 16.06

14042 - Computer Operator II 17.97

14043 - Computer Operator III 20.02

14044 - Computer Operator IV 22.26

14045 - Computer Operator V 24.65

14071 - Computer Programmer I (see 1) 22.39

14072 - Computer Programmer II (see 1)

14073 - Computer Programmer III (see 1)

14074 - Computer Programmer IV (see 1)

14101 - Computer Systems Analyst I (see 1)

14102 - Computer Systems Analyst II (see 1)

14103 - Computer Systems Analyst III (see 1)

14150 - Peripheral Equipment Operator 16.06

14160 - Personal Computer Support Technician 22.26

14170 - System Support Specialist 29.30

15000 - Instructional Occupations

15010 - Aircrew Training Devices Instructor (Non-Rated) 28.39

15020 - Aircrew Training Devices Instructor (Rated) 34.35

15030 - Air Crew Training Devices Instructor (Pilot) 41.17

15050 - Computer Based Training Specialist / Instructor 28.39

15060 - Educational Technologist 29.30

15070 - Flight Instructor (Pilot) 41.17

15080 - Graphic Artist 20.12

15085 - Maintenance Test Pilot Fixed Jet/Prop 41.17

15086 - Maintenance Test Pilot Rotary Wing 41.17

15088 - Non-Maintenance Test/Co-Pilot 41.17

15090 - Technical Instructor 24.13

15095 - Technical Instructor/Course Developer 29.51

15110 - Test Proctor 19.48

15120 - Tutor 19.48

16000 - Laundry Dry-Cleaning Pressing And Related Occupations

16010 - Assembler 9.04

16030 - Counter Attendant 9.04

16040 - Dry Cleaner 11.04

16070 - Finisher Flatwork Machine 9.04

16090 - Presser Hand 9.04 beta.SAM.gov Page 8 of 20

16110 - Presser Machine Drycleaning 9.04

16130 - Presser Machine Shirts 9.04

16160 - Presser Machine Wearing Apparel Laundry 9.04

16190 - Sewing Machine Operator 11.74

16220 - Tailor 12.51

16250 - Washer Machine 9.59

19000 - Machine Tool Operation And Repair Occupations

19010 - Machine-Tool Operator (Tool Room) 19.26

19040 - Tool And Die Maker 24.45

21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator 15.12

21030 - Material Coordinator 20.95

21040 - Material Expediter 20.95

21050 - Material Handling Laborer 12.93

21071 - Order Filler 13.38

21080 - Production Line Worker (Food Processing) 15.12

21110 - Shipping Packer 17.10

21130 - Shipping/Receiving Clerk 17.10

21140 - Store Worker I 10.21

21150 - Stock Clerk 14.49

21210 - Tools And Parts Attendant 15.12

21410 - Warehouse Specialist 15.12

23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder 30.14

23019 - Aircraft Logs and Records Technician 23.16

23021 - Aircraft Mechanic I 28.35

23022 - Aircraft Mechanic II 30.14

23023 - Aircraft Mechanic III 31.96

23040 - Aircraft Mechanic Helper 19.72

23050 - Aircraft Painter 26.61

23060 - Aircraft Servicer 23.16

23070 - Aircraft Survival Flight Equipment Technician 26.61

23080 - Aircraft Worker 24.90

23091 - Aircrew Life Support Equipment (ALSE) Mechanic 24.90

I

23092 - Aircrew Life Support Equipment (ALSE) Mechanic 28.35

II

beta.SAM.gov Page 9 of 20

23110 - Appliance Mechanic 19.26

23120 - Bicycle Repairer 15.79

23125 - Cable Splicer 25.59

23130 - Carpenter Maintenance 18.91

23140 - Carpet Layer 18.33

23160 - Electrician Maintenance 21.54

23181 - Electronics Technician Maintenance I 20.32

23182 - Electronics Technician Maintenance II 21.72

23183 - Electronics Technician Maintenance III 23.14

23260 - Fabric Worker 17.05

23290 - Fire Alarm System Mechanic 22.56

23310 - Fire Extinguisher Repairer 15.79

23311 - Fuel Distribution System Mechanic 22.37

23312 - Fuel Distribution System Operator 16.92

23370 - General Maintenance Worker 15.93

23380 - Ground Support Equipment Mechanic 28.35

23381 - Ground Support Equipment Servicer 23.16

23382 - Ground Support Equipment Worker 24.90

23391 - Gunsmith I 15.79

23392 - Gunsmith II 18.33

23393 - Gunsmith III 20.87

23410 - Heating Ventilation And Air-Conditioning 17.53

Mechanic

23411 - Heating Ventilation And Air Contidioning 18.64

Mechanic (Research Facility)

23430 - Heavy Equipment Mechanic 21.70

23440 - Heavy Equipment Operator 16.86

23460 - Instrument Mechanic 20.87

23465 - Laboratory/Shelter Mechanic 19.59

23470 - Laborer 12.93

23510 - Locksmith 19.59

23530 - Machinery Maintenance Mechanic 22.91

23550 - Machinist Maintenance 19.34

23580 - Maintenance Trades Helper 13.19

23591 - Metrology Technician I 20.87

23592 - Metrology Technician II 22.18

23593 - Metrology Technician III 23.53 beta.SAM.gov Page 10 of 20

23640 - Millwright 20.87

23710 - Office Appliance Repairer 18.35

23760 - Painter Maintenance 17.15

23790 - Pipefitter Maintenance 21.60

23810 - Plumber Maintenance 20.28

23820 - Pneudraulic Systems Mechanic 20.87

23850 - Rigger 20.87

23870 - Scale Mechanic 18.33

23890 - Sheet-Metal Worker Maintenance 18.10

23910 - Small Engine Mechanic 18.33

23931 - Telecommunications Mechanic I 26.38

23932 - Telecommunications Mechanic II 32.26

23950 - Telephone Lineman 25.11

23960 - Welder Combination Maintenance 19.90

23965 - Well Driller 20.87

23970 - Woodcraft Worker 20.87

23980 - Woodworker 15.79

24000 - Personal Needs Occupations

24550 - Case Manager 16.67

24570 - Child Care Attendant 9.49

24580 - Child Care Center Clerk 11.84

24610 - Chore Aide 9.40

24620 - Family Readiness And Support Services 16.67

Coordinator

24630 - Homemaker 16.67

25000 - Plant And System Operations Occupations

25010 - Boiler Tender 20.87

25040 - Sewage Plant Operator 15.70

25070 - Stationary Engineer 20.87

25190 - Ventilation Equipment Tender 14.52

25210 - Water Treatment Plant Operator 15.70

27000 - Protective Service Occupations

27004 - Alarm Monitor 15.96

27007 - Baggage Inspector 15.66

27008 - Corrections Officer 20.67

27010 - Court Security Officer 20.83

27030 - Detection Dog Handler 17.52 beta.SAM.gov Page 11 of 20

27040 - Detention Officer 20.67

27070 - Firefighter 20.70

27101 - Guard I 15.66

27102 - Guard II 17.52

27131 - Police Officer I 24.31

27132 - Police Officer II 27.02

28000 - Recreation Occupations

28041 - Carnival Equipment Operator 12.78

28042 - Carnival Equipment Repairer 13.89

28043 - Carnival Worker 9.34

28210 - Gate Attendant/Gate Tender 12.73

28310 - Lifeguard 11.34

28350 - Park Attendant (Aide) 14.24

28510 - Recreation Aide/Health Facility Attendant 10.09

28515 - Recreation Specialist 16.02

28630 - Sports Official 11.34

28690 - Swimming Pool Operator 16.13

29000 - Stevedoring/Longshoremen Occupational Services

29010 - Blocker And Bracer 18.56

29020 - Hatch Tender 18.33

29030 - Line Handler 18.33

29041 - Stevedore I 17.15

29042 - Stevedore II 19.71

30000 - Technical Occupations

30010 - Air Traffic Control Specialist Center (HFO) (see 2) 38.78

30011 - Air Traffic Control Specialist Station (HFO) (see 2) 26.74

30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 29.45

30021 - Archeological Technician I 17.74

30022 - Archeological Technician II 19.85

30023 - Archeological Technician III 24.59

30030 - Cartographic Technician 24.59

30040 - Civil Engineering Technician 21.12

30051 - Cryogenic Technician I 27.23

30052 - Cryogenic Technician II 30.07

30061 - Drafter/CAD Operator I 17.74

30062 - Drafter/CAD Operator II 19.85

30063 - Drafter/CAD Operator III 22.13 beta.SAM.gov Page 12 of 20

30064 - Drafter/CAD Operator IV 27.23

30081 - Engineering Technician I 14.99

30082 - Engineering Technician II 18.07

30083 - Engineering Technician III 20.24

30084 - Engineering Technician IV 26.53

30085 - Engineering Technician V 31.84

30086 - Engineering Technician VI 36.70

30090 - Environmental Technician

23.72

30095 - Evidence Control Specialist 24.59

30210 - Laboratory Technician 22.13

30221 - Latent Fingerprint Technician I 27.23

30222 - Latent Fingerprint Technician II 30.07

30240 - Mathematical Technician 24.59

30361 - Paralegal/Legal Assistant I 19.56

30362 - Paralegal/Legal Assistant II 24.23

30363 - Paralegal/Legal Assistant III 29.63

30364 - Paralegal/Legal Assistant IV 35.86

30375 - Petroleum Supply Specialist 30.07

30390 - Photo-Optics Technician 24.59

30395 - Radiation Control Technician 30.07

30461 - Technical Writer I 24.59

30462 - Technical Writer II 30.07

30463 - Technical Writer III 36.39

30491 - Unexploded Ordnance (UXO) Technician I 24.65

30492 - Unexploded Ordnance (UXO) Technician II 29.82

30493 - Unexploded Ordnance (UXO) Technician III 35.74

30494 - Unexploded (UXO) Safety Escort 24.65

30495 - Unexploded (UXO) Sweep Personnel 24.65

30501 - Weather Forecaster I 27.23

30502 - Weather Forecaster II 33.12

30620 - Weather Observer Combined Upper Air Or (see 2) 22.13

Surface Programs

30621 - Weather Observer Senior

(see 2) 24.59

31000 - Transportation/Mobile Equipment Operation Occupations

31010 - Airplane Pilot 29.82

31020 - Bus Aide 12.19

31030 - Bus Driver 17.36 beta.SAM.gov Page 13 of 20

31043 - Driver Courier 11.85

31260 - Parking and Lot Attendant 9.79

31290 - Shuttle Bus Driver 13.59

31310 - Taxi Driver 12.38

31361 - Truckdriver Light 12.56

31362 - Truckdriver Medium 16.13

31363 - Truckdriver Heavy 18.66

31364 - Truckdriver Tractor-Trailer 18.66

99000 - Miscellaneous Occupations

99020 - Cabin Safety Specialist 14.54

99030 - Cashier 10.24

99050 - Desk Clerk 9.49

99095 - Embalmer 24.65

99130 - Flight Follower 24.65

99251 - Laboratory Animal Caretaker I 11.66

99252 - Laboratory Animal Caretaker II 12.68

99260 - Marketing Analyst 30.29

99310 - Mortician 24.65

99410 - Pest Controller 20.53

99510 - Photofinishing Worker 12.95

99710 - Recycling Laborer 16.82

99711 - Recycling Specialist 20.39

99730 - Refuse Collector 15.58

99810 - Sales Clerk 10.68

99820 - School Crossing Guard 10.64

99830 - Survey Party Chief 20.74

99831 - Surveying Aide 12.95

99832 - Surveying Technician 17.74

99840 - Vending Machine Attendant 15.19

99841 - Vending Machine Repairer 19.18

99842 - Vending Machine Repairer Helper 15.19 beta.SAM.gov Page 14 of 20

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: Life accident and health insurance plans sick leave pension plans civic and personal leave severance pay and savings and thrift plans.

Minimum employer contributions costing an average of $4.54 per hour computed on the basis of all hours worked by service employees employed on the contract.

HEALTH & WELFARE EO 13706: Minimum employer contributions costing an average of $4.

22 per hour computed on the basis of all hours worked by service employees employed on the covered contracts. * http://www.dol.gov/whd/govcontracts beta.SAM.gov Page 15 of 20

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 10 years and 4 after 20 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.

beta.SAM.gov Page 16 of 20

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential beta.SAM.gov Page 17 of 20 and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving unloading storage and hauling of ordnance explosive and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.

beta.SAM.gov Page 18 of 20

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition where uniform cleaning and maintenance is made the responsibility of the employee all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount or the furnishing of contrary affirmative proof as to the actual cost) reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However in those instances where the uniforms furnished are made of ""wash and wear"" materials may be routinely washed and dried with other personal garments and do not require any special treatment such as dry cleaning daily washing or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract by the contractor by law or by the nature of the work there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

beta.SAM.gov Page 19 of 20

The duties of employees under job titles listed are those described in the ""Service Contract Act Directory of Occupations"" Fifth Edition (Revision 1) dated September 2015 unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE Standard Form 1444 (SF-1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e. the work to be performed is not performed by any classification listed in the wage determination) be classified by the contractor so as to provide a reasonable relationship (i.e. appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification wage rate and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.

beta.SAM.gov Page 20 of 20

The process for preparing a conformance request is as follows:

1) When preparing the bid the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award the contractor prepares a written report listing in order the proposed classification title(s) a Federal grade equivalency (FGE) for each proposed classification(s) job description(s) and rationale for proposed wage rate(s) including information regarding the agreement or disagreement of the authorized representative of the employees involved or where there is no authorized representative the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action together with the agency's recommendations and pertinent information including the position of the contractor and the employees to the U.S.

Department of Labor Wage and Hour Division for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt the Wage and Hour Division approves modifies or disapproves the action via transmittal to the agency contracting officer or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.

6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See 29 CFR 4.6(b)(2)(iii)).

Information required by the Regulations must be submitted on SF-1444 or bond paper.

When preparing a conformance request the ""Service Contract Act Directory of Occupations"" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember it is not the job title but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split combine or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1))."

SECTION SF 1449 - CONTINUATION SHEET

The following have been modified:

PWS

REVISED AS OF 8 January 2020

PERFORMANCE WORK STATEMENT (PWS)

COMMERCIAL KITCHEN HOOD CLEANING SERVICE

FORT HOOD, TEXAS

TABLE OF CONTENTS

PART 1 – GENERAL INFORMATION

1. GENERAL

1.1. Description of Services/Introduction

1.2. Background

1.3. Objectives

1.4. Scope

1.5. Period of Performance

1.6. General Information

1.7. Security Requirements

1.8. Disclosure of Information

1.9. Key Control

1.10. Access and General Protection/Security Policy and Procedures

1.10.1 Access to Secure Areas

1.10.2 Contractors who do not require CAC

1.11. Safety Standards

1.12. Safety Plan

1.13. Accident Reporting

1.14. Safety Measures

1.15. Stop Work

1.16. Interface with Government Operations

1.17. Damage Reports

1.18. Energy Conservation

1.19. Fraud, Waste, and Abuse

1.20. Recycling

1.21. Fire Protection

1.22. Smoking

1.23. Items Not To Be Moved

1.24. Environmental Requirements

1.25. Contractor Personnel

1.26. Post Award Conference/Periodic Progress Meetings

1.27. Identification of Contractor Employees

1.28. Vehicle Registration

1.29. Files

1.30. Modifications to Technical Exhibit B-M

PART 2 - DEFINITIONS/ACRONYMS

2. Definitions and Acronyms

2.1. Definitions

2.2. Acronyms

PART 3 - GOVERNMENT FURNISHED PROPERTY, EQUIPMENT AND SERVICES

3. Government Furnished Items and Responsibilities

PART 4 - CONTRACTOR FURNISHED ITEMS AND SERVICES

4. Contractor Furnished Items and Responsibilities

4.1. General Information

4.2. Employee Identification

4.3. Communications Equipment

4.4. Property Guidelines

4.5. Safety

4.6. Hot Work

4.7. Kitchen Exhaust Hood Service Safety

4.8. Work Stops

PART 5 - SPECIFIC TASKS

5. Specific Tasks

5.1. General

5.2. Kitchen Exhaust Hood Service

5.3. Replacement Items

5.4. Antiterrorism Training

5.5. iWATCH Training

5.6 OPSEC Training

5.7. Contractor Manpower Report

PART 6 - APPLICABLE DOCUMENTS

6. Applicable Publications

6.1. General

6.2. Abbreviations Associated with Publications

6.3. Location of Publications and Forms

6.4. Publications

PART 7 – TECHNICAL EXHIBITS

PART 8 - DATA DELIVERABLES

PART 1

GENERAL

1. GENERAL: This is a non-personnel services contract to provide commercial kitchen hood cleaning services. The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government.

1.1. Description of Services/Introduction: The Contractor shall provide personnel, management, and any other items and services, not identified as Government furnished (Part 3- Government Furnished Property (GFP) and Services), necessary to perform the kitchen hood cleaning and repairs as defined in this Performance Work Statement (PWS). The Contractor shall perform to the standards and specifications in this contract.

1.2. Background: This contract encompasses over 140 kitchen hoods varying between exhaust kitchen hoods, water wash kitchen hoods and ultraviolet kitchen hoods. These kitchen hoods are located in approximately 30 facilities throughout the main cantonment, North Fort Hood, West Fort Hood and the Belton Lake Outdoor Recreational Area (BLORA). Facilities where these kitchen hoods are located typically are dining facilities, child development centers and fire stations.

1.3. Objective: The objective for performance under this contract is to provide commercial kitchen hood cleaning services and maintain the kitchen hoods in a clean operational state in accordance with manufacturer’s recommendations and in compliance with National Fire Protection Association (NFPA) 96 Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations, 2017 Edition.

1.4. Scope: The Contractor shall provide personnel, management, and any other items and services, not Government furnished, necessary to perform the commercial kitchen hood cleaning services at Fort Hood, Texas. The Contractor shall perform to the standards and specifications in this contract. A current inventory of the number and type of commercial kitchen hoods on Fort Hood are listed in Technical Exhibits (TE’S) A-C.

1.5. Period of Performance (POP): The period of performance shall be for one (1) Base Year and four (4) one-year option periods. The tentative period of performance reads as follows:

Base Year: 1 Feb 2020 – 31 Jan 2021 Option Year 1: 1 Feb 2021 – 31 Jan 2022 Option Year 2: 1 Feb 2022 – 31 Jan 2023 Option Year 3: 1 Feb 2023 – 31 Jan 2024 Option Year 4: 1 Feb 2024 – 31 Jan 2025

1.6. General Information

1.6.1. Contractor Deliverables: Contract requirements for data submissions are detailed in PART 8 – Contract Data Deliverables.

1.6.2. Quality Control: The Contractor shall establish and implement a thorough Quality Control (QC) Plan that identifies potential and actual problem areas in executing requirements of the contract. This assists with corrective action throughout the life of the contract. The QC Plan shall be submitted to the Contracting Officer and Contracting Officer Representative COR for approval 10 days after award date and shall be updated thereafter to maintain an effective and efficient quality control program. Control measures and features defining QC activities shall be specified and metrics developed to ensure adequate program monitoring. The Government has the right to inspect all services required by this contract, during the term of the contract. The Government shall perform these inspections in a manner that will not unduly delay the work.

Any changes to the QC Plan shall be submitted to the Contracting Officer and COR for approval a minimum of five (5) working days prior to implementation. Written acceptance or non-acceptance of proposed changes will be provided to the Contractor by the Contracting Officer. No work will commence until QC Plan is approved by the government (KO).

The QC Plan shall:

• be structured to assure independent inspections of the Contractor’s work performance;

• have direct accountability to the Contractor’s top management;

• address overall project management and administration;

• be a comprehensive program to plan and deliver quality services to the Government;

• cover all services described in this contract, prioritize services, and concentrate on the most important services;

• The inspector shall be at a minimum a Certified Exhaust System Inspector (CESI);

• describe a method acceptable to the Government of identifying deficiencies in the quality of services performed under this contract before the level of performance becomes unacceptable and address processes for corrective actions without dependence upon Government direction;

• establish an inspection system covering all services required by this contract. The inspection system shall specify all areas to be inspected on either a scheduled or unscheduled basis. The inspection form shall contain the name and title of the individual who will perform the inspection;

• contain specific quality control techniques for contract services identified in the

Performance Requirements Summary (PRS) and Inspection of Services Clause. The quality control methods shall be comprehensive and adaptable to the reporting systems of the QC Plan;

• include a customer complaint feedback system for correction of validated complaints and to inform the customer of corrections. The QC Plan shall describe how users or other interested parties may identify problem areas or issues to the Contractor. The customer complaint program shall be compatible with the reporting and communications systems of the QC Plan;

• require documentation of all Contractor quality control inspections and corrective actions be maintained by the Contractor throughout the term of this contract. Inspection documents shall be made available to the Contracting Officer and COR within one (1) working day upon completion of all quality control inspections;

• describe methods of direct and indirect communications with the Government regarding performance of the contract. Informal communications shall be addressed.

1.6.3. Quality Assurance: The Government will evaluate the contractor’s performance under this contract in accordance with a Quality Assurance Surveillance Plan (QASP) that is tailored specifically to this contract. The QASP will be used to evaluate Contractor actions while implementing the Performance Work Statement. It is designed to provide an effective surveillance method to monitor contractor performance for each objective listed on the PRS. This plan is for the Government’s use and is not provided to the Contractor for any purpose. The Contractor is solely responsible for management and quality control actions to meet the terms of the contract. The role of the government is quality assurance to ensure contract standards are achieved. The standards of performance of services performed under this contract are listed in the PRS.

1.6.4. Recognized Holidays: Contractor performance shall not be required on the legal federal holidays. When one (1) of the designated legal holidays falls on a Sunday, the following Monday will be observed as a legal holiday. When a legal holiday falls on a Saturday, the preceeding Friday is observed as a holiday. Holidays occuring on Weekends will be observed as directed by the federal calendar (5 U.S.C. 6103).

1.6.4.1 Emergency Services: In the event of an emergency, the Government reserves the right to have the Contractor perform work on any of the recognized holidays listed in PWS Section

1.6.4. The Contractor shall be responsible for providing all personnel and supplies necessary to support all emergency services within two (2) hours of notification by the Contracting Officer and COR. The Contractor shall provide a list of emergency call telephone numbers to the Contracting Officer or designated representative not later than two (2) workdays after the effective date of change.

1.6.5. Standard Hours of Operation: The Contractor is responsible for conducting business, between the hours of 1600 - 2400 Monday through Friday except federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential.

1.6.5.1 Other Than Standard Hours of Operation: The Contractor may request authorization from the Contracting Officer to work outside of the standard hours of operation if working outside of the standard hours of operation is necessary. The Contractor shall NOT work outside of the standard hours of operation unless they have received written authorization from the Contracting Officer PRIOR to performing work. Working outside the standard hours of operation shall be at no additional cost to the Government.

1.6.6. Place of Performance: The work to be performed under this contract shall be performed at Fort Hood, Texas which consists of the Main Cantonment, West Fort Hood and North Fort Hood areas. Fort Hood is located approximately 60 miles north of Austin and 50 miles south of Waco, Texas. The Main Cantonment area is approximately 20 miles west of Interstate Highway 35, Belton, Texas, and adjacent to Killeen, Texas. West Fort Hood is immediately adjacent to the Main Cantonment and North Fort Hood is approximately 25 miles north of the Main Cantonment. Maps of the Main Cantonment, West Fort Hood and North Fort Hood are available upon contract award. BLORA is located approximately 9 miles east of the Main Cantonment.

1.7. Security Requirements: Contractor personnel and any representative of the Contractor entering Fort Hood, Texas, shall abide by all security regulations and shall be subject to security checks. Contractor personnel and property shall be subject to search and seizure upon entering the confines of Fort Hood, Texas, while on Fort Hood, Texas, and upon leaving the confines of Fort Hood, Texas. The Contractor shall be responsible for assuring all Contractor personnel authorized to perform work under this contract obtain installation access as required by DOD Directive 4630.5. - Interoperability and Supportability of Information Technology (IT) and National Security Systems (NSS) 23 April 2007. Government furnished identification shall be returned to the Government when the employee no longer performs work for the Contractor under this contract.

1.7.1. Physical Security: The Contractor shall comply with FH Regulation 190-8 Administration and Management of Physical Security 4 March 2011, and be responsible for security of all facilities, materials and equipment utilized during the performance period. In case of forced entry or theft, the Contractor shall notify the Provost Marshall’s Office (PMO) immediately and cooperate in the investigation. The contractor shall be responsible for safeguarding all government equipment, information and property provided for contractor use.

At the close of each work period, government facilities, equipment, and materials shall be secured.

1.8. Disclosure of Information: Performance under this contract may require the Contractor to access data and information proprietary to a government agency, another Contractor, or of such nature that its dissemination or use other than as specified in this work statement would be adverse to the interests of the Government or others. Neither the Contractor, nor Contractor personnel, shall divulge nor release data nor information developed or obtained under performance of this work statement, except as authorized, in writing, by the Contracting Officer.

The Contractor shall not use, disclose, or reproduce proprietary data which bears a restrictive legend, other than as specified in this work statement.

1.8.1. Disclosure of information regarding operations and services of the activity to persons not entitled to receive it, or failure to safeguard any classified information that may come to the Contractor (or any persons under the Contractor’s control) in connection with work under this work statement, may subject the Contractor, Contractor’s agent, or employees to criminal liability under 18 U.S.C. § 793 : US Code - Section 793: Gathering, transmitting or losing defense information and 18 USC § 798 - Disclosure of classified information. Neither the Contractor, nor the Contractor’s employees, shall disclose or cause to be disseminated, any information concerning the operations of the activity that could result in, or increase the likelihood of, the possibility of a breach of the activities’ security or interrupt the continuity of its operation.

1.8.2. The Contractor shall direct to the Contracting Officer and COR all inquiries, comments, or complaints arising from matters observed, experienced, or learned as a result of, or in connection with the performance of this contract, the resolution of which may require the dissemination of official information.

1.8.3. Inquiries received by the Contractor for work performed under this contract shall be referred to the Government for evaluation under Public Law 93-502, 5 U.S.C., Section 552- Freedom of Information Act of 1975. The determination of whether records will be released will remain with the Government. The Contractor shall be responsible for search and submission of records upon request by the Government.

1.8.4. The Contractor shall not release any information (including photographs, files, public announcements, statements, denials, or confirmations) on any part of the subject matter of this contract or any phase of any program hereunder without the prior written approval of the Contracting Officer. All documentation showing individuals’ names or other personal information will be controlled and protected. The provisions of Public Law 93-579, 5 U.S.C., Section 552a - Privacy Act of 1974, shall apply.

1.9. Key Control: The Contractor shall establish and implement methods of making sure all keys/key cards issued to the Contractor by the Government are not lost or misplaced and are not used by unauthorized persons. NOTE: All references to keys include key cards. No keys issued to the Contractor by the Government shall be duplicated. The Contractor shall develop procedures covering key control that shall be included in the Quality Control Plan. Such procedures shall include turn-in of any issued keys by personnel who no longer require access to locked areas. The Contractor shall immediately report any occurrences of lost or duplicate keys/key cards to the Contracting Officer and COR.

1.9.1. In the event keys, other than master keys, are lost or duplicated, the Contractor shall, upon direction of the Contracting Officer, re-key or replace the affected lock(s); however, the Government, at its option, may replace the affected lock(s) or perform re-keying. When the replacement of locks or re-keying is performed by the Government, the total cost shall be deducted from the monthly payment due the Contractor. In the event a master key is lost or duplicated, all locks and keys for that system shall be replaced by the Government and the total cost deducted from the monthly payment due the Contractor.

1.9.2. The Contractor shall prohibit the use of Government issued keys/key cards by any persons other than the Contractor’s employees.